A substitutive substrate for measurements of beta-ketoacyl reductases in two fatty acid synthase systems

Bacterial β-ketoacyl-ACP reductase (FabG) and the β-ketoacyl reductase domain in mammalian fatty acid synthase (FAS) have the same function and both are rendered as the novel targets for drugs. Herein we developed a convenient method, using an available compound ethyl acetoacetate (EAA) as the substitutive substrate, to measure their activities by monitoring decrease of NADPH absorbance at 340 nm. In addition to the result, ethyl 3-hydroxybutyrate (EHB) was detected by HPLC analysis in the reaction system, indicating that EAA worked effectively as the substrate of FabG and FAS since its β-keto group was reduced. Then, the detailed kinetic characteristics, such as optimal ionic strength, pH value and temperature, and kinetic parameters, for FabG and FAS with this substitutive substrate were determined. The K_m and k_cat values of FabG obtained for EAA were 127 mM and 0.30 s^− 1, while those of this enzyme for NADPH were 10.0 μM and 0.59 s^− 1, respectively. The corresponding K_m and k_cat values of FAS were 126 mM and 4.63 s^− 1 for EAA; 8.7 μM and 4.09 s^− 1 for NADPH. Additionally, the inhibitory kinetics of FabG and FAS, by a known inhibitor EGCG, was also studied.     

Electrochemical impedance spectroscopy for study of aptamer-thrombin interfacial interactions

A simple and highly sensitive electrochemical impedance spectroscopy (EIS) biosensor based on a thrombin-binding aptamer as molecular recognition element was developed for the determination of thrombin. The signal enhancement was achieved by using gold nanoparticles (GNPs), which was electrodeposited onto a glassy carbon electrode (GCE), as a platform for the immobilization of the thiolated aptamer. In the measurement of thrombin, the change in interfacial electron transfer resistance of the biosensor using a redox couple of [Fe(CN)₆]^3−/4− as the probe was monitored. The increase of the electron transfer resistance of the biosensor is linear with the concentration of thrombin in the range from 0.12 nM to 30 nM. The association and dissociation rate constants of the immobilized aptamer–thrombin complex were 6.7 × 10³ M⁻¹ s⁻¹ and 1.0 × 10⁻⁴ s⁻¹, respectively. The association and dissociation constants of three different immobilized aptamers binding with thrombin were measured and the difference of the dissociation constants obtained was discussed. This work demonstrates that GNPs electrodeposited on GCE used as a platform for the immobilization of the thiolated aptamer can improve the sensitivity of an EIS biosensor for the determination of protein. This work also demonstrates that EIS method is an efficient method for the determination of association and dissociation constants on GNPs modified GCE.     

The alternating current polarographic behavior and determination of lansoprazole and omeprazole in dosage forms and biological fluids

The alternating current (AC_t) polarographic behavior of lansoprazole (LNS) and omeprazole (OMP) was studied in Britton Robinson buffers (BRb) over the pH range 4.1–11.5. In BRb of pH 9.6 and 10.5, well-defined AC_t peaks were obtained for both LNS and OMP, respectively. The current–concentration plots were rectilinear over the ranges of 0.4–20 µg mL^− 1 and 0.2–10 µg mL^− 1 for LNS and OMP respectively. The minimum detection limits (S/N = 2) were 0.02 µg mL^− 1 (5.4 × 10^− 8 M) and 0.01 µg mL^− 1 (2.9 × 10^− 8 M) for LNS and OMP, respectively. The proposed method was successfully applied to the analysis of the two drugs in their commercial capsules. The average percent recoveries were favorably compared to those obtained by reference methods. Co-administered drugs such as naproxen and methotrexate did not interfere with the proposed method. The proposed method was further extended to the in-vitro determination of the lansoprazole in spiked plasma, the percentage recoveries was 98.47 ± 1.29 (n = 4). The pathway for the electrode reaction for both drugs involved reduction of the sulphonyl group into the corresponding thiol group at the Dropping Mercury Electrode. The advantages of the method were time saving and more sensitive than the other published voltammetric method. Yet The present study is the first report on the use of alterating current polarography (AC_t) in this respect.     

Immobilization of horseradish peroxidase on chitosan/silica sol-gel hybrid membranes for the preparation of hydrogen peroxide biosensor

A simple and effective strategy for fabrication of hydrogen peroxide (H₂O₂) biosensor has been developed by entrapping horseradish peroxidase (HRP) in chitosan/silica sol–gel hybrid membranes (CSHMs) doped with potassium ferricyanide (K₃Fe(CN)₆) and gold nanoparticles (GNPs) on platinum electrode surface. The hybrid membranes are prepared by cross-linking chitosan (CS) with 3-aminopropyltriethoxysilane (APTES), while the presence of GNPs improved the conductivity of CSHMs, and the Fe(CN)₆^3−/4− was used as a mediator to transfer electrons between the electrode and HRP due to its excellent electrochemistry activity. UV–Vis absorption spectroscopy was employed to characterize the different components in the CSHMs and their interaction. The parameters influencing the performance of the resulting biosensor were optimized and the characteristic of the resulting biosensor was characterized by cyclic voltammetry and chronoamperometry. Linear calibration for hydrogen peroxide was obtained in the range of 3.5 × 10^− 6 to 1.4 × 10^− 3 M under the optimized conditions with the detection limit (S/N = 3) of 8.0 × 10^− 7 M. The apparent Michaelis–Menten constant of the enzyme electrode was 0.93 mM. The enzyme electrode retained about 78% of its response sensitivity after 30 days. The system was applied for the determination of the samples, and the results obtained were satisfactory.     

Contribution of the heme propionate groups to the electron transfer and electrostatic properties of myoglobin

The role of the heme propionate groups in determining the electron transfer and electrostatic properties of myoglobin have been studied by thermodynamic, kinetic, and spectroscopic studies of horse heart myoglobin in which the heme propionate groups are esterified. Spectroelectrochemical analysis has established that the E_m,7 of dimethylester heme-substituted Mb (DME-Mb) (E_m,7 = 100.2(2) mV vs. NHE (Normal Hydrogen Electrode) (25 °C) is increased  40 mV relative to that of the native protein with ΔH° = −12.9(2) kcal/mol and ΔS° = −51.0(8) cal/mol/deg (pH 7.0, μ = 0.1 M (phosphate)). The second order rate constant for reduction of DME-metMb by Fe(EDTA)²⁻ is increased  > 400-fold relative to that for reduction of native metMb to a value of 1.34(2) × 10³ M⁻¹ s⁻¹ with ΔS^‡ = −13(1) cal/mol/deg and ΔH^‡ = 9.2(3) (pH 7.0, μ = 0.1 M (phosphate)). Analysis of the pH dependences of the reduction potential and rate constant for reduction by Fe(EDTA)²⁻ demonstrates that heme propionate esterification introduces significant changes into the electrostatic interactions in myoglobin. These changes are also manifested by differences in the pH dependences of the ¹H NMR spectra of native and DME-metMb that reveal shifts in pK_a values for specific His residues as the result of heme propionate esterification. In sum, the current results establish that heme propionate esterification not only affects the electron transfer properties of myoglobin but also influences the titration behavior of specific His residues.     

Effects of food nitrogen content and concentration on the forms of nitrogen excreted by the calanoid copepod, Acartia tonsa

Nitrogen excreted as ammonium, urea, and dissolved primary amines (DPA), and nitrogen ingested by the planktonic calanoid copepod, Acartia tonsa, were measured while fed 4 foods with different N/C ratios in high (500 μg C l^− 1) and low (50 μg C l^− 1) concentrations. Adult copepods were fed the ciliate, Uronema marinum (N/C = 0.26), the diatom, Thalassiosira weissflogii, in log-phase growth (N/C = 0.20), and in senescent-phase growth (N/C = 0.12), and detritus derived from the saltmarsh grass, Spartina alterniflora, (N/C = 0.04). Total nitrogen excreted ranged from 0.06 to 0.18 μg N copepod^− 1 d^− 1 whereas nitrogen ingested exhibited considerably more variation (0.01 to 0.39 μg N copepod ^− 1d ^− 1). Ammonium was the dominant form of nitrogen excreted and was influenced by both food concentration and N/C ratio. Copepods fed foods with N/C ratios resembling their own body composition (log-phase diatoms and ciliates) excreted more ammonium when fed higher concentrations of food. In contrast, copepods fed foods with lower N/C ratios than their own body composition excreted more ammonium when fed lower concentrations of food, suggesting that they were catabolizing body protein for survival. Excretion of urea varied with food N/C ratio, with more urea excreted when the copepods were fed higher N/C foods. The excretion of DPA did not vary with either food concentration or food N/C ratio. Homeostasis serves to conserve the N/C ratio of copepods. Thus nitrogen excretion by healthy copepods should be expected to increase with ingestion only when copepods have high quantities of nitrogen-rich foods relative to the body composition of the copepods.     

Conceptual model of seagrass die-off in Florida Bay: Links to biogeochemical processes

Seagrasses are recognized as important plant communities in coastal estuaries and lagoons across both tropical and temperate climes; thus, large-scale seagrass die-off events worldwide are of general concern. In Florida Bay, at the southern terminus of the Florida peninsula, seagrass die-off events up to 4000 ha have been reported and smaller scale mortality events are noted annually. In the present study, we examined several hypothesized causative factors (high temperature, hypersalinity, sulfide toxicity) of seagrass (Thalassia testudinum) mortality in Florida Bay. To test sulfide effects, in situ sulfide production was stimulated by applying a labile carbon source (glucose) to sulfate reducers in the sediment at five sites across the bay (northeastern, northcentral, and southwestern basins). During the one year study, high temperature (32–36 °C) and salinity (> 50 psu) were recorded in the bay associated with a regional drought. We also experienced major seagrass die-off events at two of our southwestern bay sites. These field conditions provided an excellent opportunity to closely examine cause–effect relationships among stressors and die-off events in the field, and verify results of our previous mesocosm experiments. Even though glucose amendments stimulated porewater sulfides in bay sediments (4–8 mmol L^− 1), no significant differences in biomass, short shoot density or final growth rates were found between control and glucose plots. In addition, the highest growth rates and shoot densities were concomitant with maximum water column salinity (> 50 psu) and temperature (32–36 °C), when porewater sulfides were also in the millimolar range. Large-scale seagrass mortality events, encompassing  50% of the entire meadow at one site, occurred at southwestern bay sites when plants were down regulating (slower growth and shoot density), probably in response to shorter day length and lower temperature (30–34 to 23–26 °C) from October, 2004 to January, 2005. Sulfate reduction rates (SRR) were also 2-fold higher in the southwestern (214–488 nmol cm^− 3 d^− 1) versus northcentral and northeastern (97–240 nmol cm^− 3 d^− 1) bay sites, possibly limited by labile carbon, which we found to stimulate SRR 3-fold in northeastern and northcentral bay sites (461–708 nmol cm^− 3 d^− 1) and 4-fold at southwestern bay sites (1211–2036 nmol cm^− 3 d^− 1). Based on a synthesis of the field data reported herein, our mesocosm experiments to date, and contributions by others, we present a conceptual model of seagrass die-off in Florida Bay outlining a cascade of stressors, stimulated by P enrichment, which leads to high O₂ consumption in the system triggering a seagrass die-off event.     

Glucose biosensor based on nano-SiO2 and "unprotected" Pt nanoclusters

The “unprotected” Pt nanoclusters (average size 2 nm) mixed with the nanoscale SiO₂ particles (average size 13 nm) were used as a glucose oxidase immobilization carrier to fabricate the amperometric glucose biosensor. The bioactivity of glucose oxidase (GOx) immobilized on the composite was maintained and the as-prepared biosensor demonstrated high sensitivity (3.85 μA mM⁻¹) and good stability in glucose solution. The Pt–SiO₂ biosensor showed a detection limit of 1.5 μM with a linear range from 0.27 to 4.08 mM. In addition, the biosensor can be operated under wide pH range (pH 4.9–7.5) without great changes in its sensitivity. Cyclic voltammetry measurements showed a mixed controlled electrode reaction.     

Morphological and physiological responses of canola (Brassica napus) siliquas and seeds to UVB and CO2 under controlled environment conditions

Combined effects of UVB radiation and CO₂ concentration on plant reproductive parts have received little attention. We studied morphological and physiological responses of siliquas and seeds of canola (Brassica napus L. cv. 46A65) to UVB and CO₂ under four controlled experimental conditions: UVB radiation (4.2 kJ m⁻² d⁻¹) with ambient level of CO₂ (370 μmol mol⁻¹) (control); UVB radiation (4.2 kJ m⁻² d⁻¹) with elevated level of CO₂ (740 μmol mol⁻¹); no UVB radiation (0 kJ m⁻² d⁻¹) with ambient level of CO₂ (370 μmol mol⁻¹); and no UVB radiation (0 kJ m⁻² d⁻¹) with elevated level of CO₂ (740 μmol mol⁻¹). UVB radiation affected the outer appearance of siliquas, such as colour, as well as their anatomical structures. At both CO₂ levels, the UVB radiation of 4.2 kJ m⁻² d⁻¹ reduced the size of seeds, which had different surface patterns than those from no UVB radiation. At both CO₂ levels, 4.2 kJ m⁻² d⁻¹ of UVB decreased net CO₂ assimilation (A_N) and water use efficiency (WUE), but had no effect on transpiration (E). Elevated CO₂ increased A_N and WUE, but decreased E, under both UVB conditions. At both CO₂ levels, the UVB radiation of 4.2 kJ m⁻² d⁻¹ decreased chlorophyll fluorescence, total chlorophyll (Chl), Chl a and Chl b, but had no effect on the ratio of Chl a/b and the concentration of UV-screening pigments. Elevated CO₂ increased total Chl and the concentration of UV-screening pigments under 4.2 kJ m⁻² d⁻¹ of UVB radiation. Neither UVB nor CO₂ affected wax content of siliqua surface. Many significant relationships were found between the above-mentioned parameters. This study revealed that UVB radiation exerts an adverse effect on canola siliquas and seeds, and some of the detrimental effects of UVB on these reproductive parts can partially be mitigated by CO₂.     

Thermodynamic and kinetic analysis of the interaction between hepatitis B surface antibody and antigen on a gold electrode modified with cysteamine and colloidal gold via electrochemistry

Hepatitis B surface antibody (HBsAb) was immobilized to the surface of a gold electrode modified with cysteamine and colloidal gold as matrices to detect hepatitis B surface antigen (HBsAg). Differential pulse voltammetry (DPV) method was used for the investigation of the specific interaction between the immobilized HBsAb and HBsAg in solution, which was followed as a change of peak current in DPV with time. With the modified gold electrode, the differences in affinity of HBsAb with HBsAg at the temperatures of 37 and 40 °C were easily distinguished and the kinetic rate constants (k_ass and k_diss) and kinetic affinity constant K were determined from the curves of current versus time. In addition, the thermodynamic constants, ΔG, ΔH and ΔS, of the interaction at 37 °C were calculated, which were −56.65, −64.54 and −25.45 kJ mol⁻¹, respectively.     

Manganese(II) complexes of an acyclic phenol-based dinucleating ligand with four methoxyethyl chelating arms: synthesis, structure, magnetism and electrochemistry

Dinuclear manganese(II) complexes [Mn₂(bomp)(PhCO₂)₂]BPh₄ (1), [Mn₂(bomp)(MeCO₂)₂]BPh₄ (2), and [Mn₂(bomp)(PhCO₂)₂]PF₆ (3) were synthesized with a dinucleating ligand 2,6-bis[bis(2-methoxyethyl)aminomethyl]-4-methylphenol [H(bomp)]. Dinuclear zinc complex [Zn₂(bomp)(PhCO₂)₂]PF₆ (4) was also synthesized for the purpose of comparison. X-ray analysis revealed that the complex 1·CHCl₃ contains two manganese ions bridged by the phenolic oxygen and two benzoate groups, forming a μ-phenoxo-bis(μ-benzoato)dimanganese(II) core. Magnetic susceptibility measurements of 1–3 over the temperature range 1.8–300 K indicated antiferromagnetic interaction (J=−4 to −6 cm⁻¹). Cyclic voltammograms of 3 showed a quasi-reversible oxidation process at +0.9 V versus a saturated sodium chloride calomel reference electrode, assigned to Mn^IIMn^II/Mn^IIMn^III.     

A study in UF-membrane reactor on activity and stability of nitrile hydratase from Microbacterium imperiale CBS 498-74 resting cells for propionamide production

The bioconversion of propionitrile to propionamide was catalysed by nitrile hydratase (NHase) using resting cells of Microbacterium imperiale CBS 498-74 (formerly, Brevibacterium imperiale). This microorganism, cultivated in a shake flask, at 28 °C, presented a specific NHase activity of 34.4 U mg_DCW⁻¹ (dry cell weight). The kinetic parameters, K_m and V_max, tested in 50 mM sodium phosphate buffer, pH 7.0, in the propionitrile bioconversion was evaluated in batch reactor at 10 °C and resulted 21.6 mM and 11.04 μmol min⁻¹ mg_DCW⁻¹, respectively. The measured apparent activation energy, 25.54 kJ mol⁻¹, indicated a partial control by mass transport, more likely through the cell wall.

UF-membrane reactors were used for kinetic characterisation of the NHase catalysed reaction. The time dependence of enzyme deactivation on reaction temperature (from 5 to 25 °C), on substrate concentrations (from 100 to 800 mM), and on resting cell loading (from 1.5 to 200 μg  ml⁻¹) indicated: lower diffusional control (E_a=37.73 kJ mol⁻¹); and NHase irreversible damage caused by high substrate concentration. Finally, it is noteworthy that in an integral reactor continuously operating for 30 h, at 10 °C, 100% conversion of propionitrile (200 mM) was attained using 200 μg  ml⁻¹ of resting cells, with a maximum volumetric productivity of 0.5 g l⁻¹ h⁻¹.     

Direct electrochemistry of cytochrome c at ordered macroporous active carbon electrode

Three-dimensionally (3D) ordered macroporous active carbon has been fabricated and used as electrode substrate for the direct electrochemistry of horse heart cytochrome c (Cyt c). The Cyt c immobilized on the surface of the ordered macroporous active carbon shows a pair of well-defined and nearly reversible redox waves at the formal potential of −0.033 V in pH 6.8 phosphate buffer solution. The interaction between Cyt c and the 3D macroporous active carbon makes the formal potential shift negatively compared to that of Cyt c in solution. Spectrophotometric and electrochemical methods have been used to investigate the interaction between Cyt c and the porous active carbon. The immobilized Cyt c maintains its biological activity, and shows a surface controlled electrode process with the electron-transfer rate constant (k_s) of 17.6 s⁻¹ and the charge-transfer coefficient (a) of 0.52, and displays the features of a peroxidase in the electrocatalytic reduction of hydrogen peroxide (H₂O₂). A potential application of the Cyt c-immobilized porous carbon electrode as a biosensor to monitor H₂O₂ has been investigated. The steady-state current response increases linearly with H₂O₂ concentration from 2.0 × 10⁻⁵ to 2.4 × 10⁻⁴ mol l⁻¹. The detection limit (3σ) for determination of H₂O₂ has been found to be 1.46 × 10⁻⁵ mol l⁻¹.     

The non-specific inhibition of enzymes by environmental pollutants: a study of a model system towards the development of electrochemical biosensor arrays

Previous research has shown that lactate dehydrogenase (LDH) was competitively inhibited by pentachlorophenol (PCP) and a modified assay produced a detection limit of 1 μM (270 μg l⁻¹). This work used spectrophotometric rate-determination but in order to move towards biosensor development the selected detection method was electrochemical. The linkage of LDH to lactate oxidase (LOD) provided the electroactive species, hydrogen peroxide. This could be monitored using a screen-printed carbon electrode (SPCE) incorporating the mediator, cobalt phthalocyanine, at a potential of +300 mV (vs. Ag/AgCl). A linked LDH/LOD system was optimised with respect to inhibition by PCP. It was found that the SPCE support material, PVC, acted to reduce inhibition, possibly by combining with PCP. A cellulose acetate membrane removed this effect. Inhibition of the system was greatest at enzyme activities of 5 U ml⁻¹ LDH and 0.8 U ml⁻¹ LOD in reactions containing 246 μM pyruvate and 7.5 μM NADPH. PCP detection limits were an EC₁₀ of 800 nM (213 μg l⁻¹) and a minimum inhibition detectable (MID) limit of 650 nM (173 μg l⁻¹). The inclusion of a third enzyme, glucose dehydrogenase (GDH), provided cofactor recycling to enable low concentrations of NADPH to be incorporated within the assay. NADPH was reduced from 7.5 to 2 μM. PCP detection limits were obtained for an assay containing 5 U ml⁻¹ LDH, 0.8 U ml⁻¹ LOD and 0.1 U ml⁻¹ GDH with 246 μM pyruvate, 400 mM glucose and 2 μM NADPH. The EC₁₀ limit was 150 nM (39.9 μg l⁻¹) and the MID was 100 nM (26.6 μg l⁻¹). The design of the inhibition assays discussed has significance as a model for other enzymes and moves forward the possibility of an electrochemical biosensor array for pollution monitoring.     

Influence of phosphorus concentration on the growth kinetics and stoichiometry of the microalga Scenedesmus obliquus

The growth of the freshwater microalga Scenedesmus obliquus was studied at 30°C in a mineral culture medium with phosphorus concentrations of between 0 and 372 μ . The values for the specific growth rates, between and , fitted a semistructured substrate-limitation model with μ_m1 = 0·0466 h⁻¹, μ_m2 = 0·0256 h⁻¹ and . The specific uptake rate of phosphorus reached a maximum value of q_Sm1 = 658·01 × 10⁻⁴ μmol P mg⁻¹ biomass h⁻¹.     

Determination of zinc in vegetal tissue microsamples by platinum-wire loop in flame atomization atomic absorption spectrometry

The zinc content of 3 μL of vegetal samples (tree leaves, lichens and grape sap) atomized from a Pt-wire in the methane–air flame has been determined by atomic absorption spectrometry. The effect of gas flow rates and the atomization height in the flame on the absorption of zinc was evaluated at 213.9 nm. The best results were obtained at a height of 5 mm and gas flow rates of 200 L/h air and 26 L/h methane, respectively. The effect of Na, K, Ca, Mg, SO₄²⁻, and PO₄³⁻ on the absorption of zinc was studied too. The detection limit of 0.40 ± 0.21 ng was obtained at a significance level of 0.05, using the two-step Neyman–Pearson criterion. The zinc content of the samples has been determined with continuous nebulization and by atomization from the Pt-wire, using both the standard calibration curve and the standard addition method. The results of the two procedures agree within the determination errors.     

The response of intact Strongyloides ratti infective (L3) larvae to substrates and inhibitors of respiratory electron transport.

Live, intact third-stage larvae (L3s) of Strongyloides ratti in the absence of exogenous substrates consumed oxygen at a rate (E-QO₂) of 181.8 ± 12.4 ng atoms min⁻¹ mg dry weight⁻¹ at 35°C. Respiratory electron transport (RET) Complex I inhibitor rotenone (2 μ ) produced 33 ± 6.5% inhibition of the E-QO₂. Unusually the rotenone-induced inhibition was not relieved by 5 μ -succinate. The E-QO₂ of intact L3s was refractory to RET Complex III inhibitor antimycin A at 2 μ ; 4 μ -antimycin inhibited ≤ 10% of the E-QO₂. The electron donor couple ascorbate/TMPD augmented the E-QO₂ in the presence of rotenone (2 μ ) and antimycin A (4 μ ) by 110%. Azide (1 m ) stimulated the antimycin A refractory QO₂ by 36.6 ± 7.2% which was only partially inhibited by 1.0 m -KCN ( ). The data suggest the presence of classical (CPW) and alternate (APW) electron transport pathways in S. ratti L3s.     

Bioconversion of phospholipids by immobilized phospholipase A2

Phospholipase A₂ selectively hydrolyses the ester linkage at the sn-2 position of phospholipids forming lysocompounds. This bioconversion has importance in biotechnology since lysophospholipids are strong bioemulsifiers. The aim of the present work was to study the kinetic behaviour and properties of immobilized phospholipase A₂ from bee venom adsorbed into an ion exchange support. The enzyme had high affinity for CM-Sephadex^® support and the non-covalent interaction was optimum at pH 8. The activity of immobilized phospholipase A₂ was comparatively evaluated with the soluble enzyme using a phospholipid/Triton X-100 mixed micelle as assay system. The immobilized enzyme showed high retention activity and excellent stability under storage. The activity of the immobilized system remained almost constant after several cycles of hydrolysis. Immobilized phospholipase A₂ was less sensitive to pH changes compared to soluble form. The kinetic parameters obtained (V_max 883.4 μmol mg⁻¹ min⁻¹ and a K_m 12.9 mM for soluble form and V_max = 306 μmol mg⁻¹ min⁻¹ and a K_m = 3.9 for immobilized phospholipase A₂) were in agreement with the immobilization effect. The results obtained with CM-Sephadex^®-phospholipase A₂ system give a good framework for the development of a continuous phospholipid bioconversion process.     

Photosynthetic response of Myriophyllum salsugineum A.E. orchard to photon irradiance, temperature and external free CO2

The photosynthetic capacity of Myriophyllum salsugineum A.E. Orchard was measured, using plants collected from Lake Wendouree, Ballarat, Victoria and grown subsequently in a glasshouse pond at Griffith, New South Wales. At pH 7.00, under conditions of constant total alkalinity of 1.0 meq dm⁻³ and saturating photon irradiance, the temperature optimum was found to be 30–35°C with rates of 140 μmol mg⁻¹ chlorophyll a h⁻¹ for oxygen production and 149 μmol mg⁻¹ chlorophyll a h⁻¹ for consumption of CO₂. These rates are generally higher than those measured by other workers for the noxious Eurasian water milfoil, Myriophyllum spicatum L., of which Myriophyllum salsugineum is a close relative. The light-compensation point and the photon irradiance required to saturate photosynthetic oxygen production were exponentially dependent on water temperature. Over the temperature range 15–35°C the light-compensation point increased from 2.4 to 16.9 μmol (PAR) m⁻² s⁻¹ for oxygen production while saturation photon irradiance increased from 41.5 to 138 μmol (PAR) m⁻² s⁻¹ for oxygen production and from 42.0 to 174 μmol (PAR) m⁻² s⁻¹ for CO₂ consumption. Respiration rates increased from 27.1 to 112.3 μmol (oxygen consumed) g⁻¹ dry weight h⁻¹ as temperature was increased from 15 to 35°C. The optimum temperature for productivity is 30°C.     

Immobilization of catalase into chemically crosslinked chitosan beads

Bovine liver catalase was immobilized into chitosan beads prepared in crosslinking solution. Various characteristics of immobilized catalase such as the pH–activity curve, the temperature–activity curve, thermal stability, operational stability, and storage stability were evaluated. Among them the pH optimum and temperature optimum of free and immobilized catalase were found to be pH 7.0 and 35 °C. The K_m value of immobilized catalase (77.5 mM) was higher than that of free enzyme (35 mM). Immobilization decreased in V_max value from 32,000 to 122 μmol (min mg protein)⁻¹. It was observed that operational, thermal and storage stabilities of the enzyme were increased with immobilization.