Peakmatch: a simple and robust method for peak list matching

Peak lists are commonly used in NMR as input data for various software tools such as automatic assignment and structure calculation programs. Inconsistencies of chemical shift referencing among different peak lists or between peak and chemical shift lists can cause severe problems during peak assignment. Here we present a simple and robust tool to achieve self-consistency of the chemical shift referencing among a set of peak lists. The Peakmatch algorithm matches a set of peak lists to a specified reference peak list, neither of which have to be assigned. The chemical shift referencing offset between two peak lists is determined by optimizing an assignment-free match score function using either a complete grid search or downhill simplex optimization. It is shown that peak lists from many different types of spectra can be matched reliably as long as they contain at least two corresponding dimensions. Using a simulated peak list, the Peakmatch algorithm can also be used to obtain the optimal agreement between a chemical shift list and experimental peak lists. Combining these features makes Peakmatch a useful tool that can be applied routinely before automatic assignment or structure calculation in order to obtain an optimized input data set.     

Tools for the automated assignment of high-resolution three-dimensional protein NMR spectra based on pattern recognition techniques

One of the major bottlenecks in the determination of proteinstructures by NMR is in the evaluation of the data produced by theexperiments. An important step in this process is assignment, where thepeaks in the spectra are assigned to specific spins within specificresidues. In this paper, we discuss a spin system assignment tool based onpattern recognition techniques. This tool employs user-specified templatesto search for patterns of peaks in the original spectra; these patterns maycorrespond to side-chain or backbone fragments. Multiple spectra willnormally be searched simultaneously to reduce the impact of noise. Thesearch generates a preliminary list of putative assignments, which arefiltered by a set of heuristic algorithms to produce the final results list.Each result contains a set of chemical shift values plus information aboutthe peaks found. The results may be used as input for combinatorialroutines, such as sequential assignment procedures, in place of peak lists.Two examples are presented, in which (i) HCCH-COSY and -TOCSY spectra arescanned for side-chain spin systems; and (ii) backbone spin systems aredetected in a set of spectra comprising HNCA, HN(CO)CA, HNCO, HN(CA)CO,CBCANH and CBCA(CO)NH.     

Sorting signals from protein NMR spectra: SPI,a Bayesian protocol for uncovering spin systems

Grouping of spectral peaks into J-connected spin systems is essential in the analysis of macromolecular NMR data as it provides the basis for disentangling chemical shift degeneracies. It is a mandatory step before resonance and NOESY cross-peak identities can be established. We have developed SPI, a computational protocol that scrutinizes peak lists from homo- and hetero-nuclear multidimensional NMR spectra and progressively assembles sets of resonances into consensus J- and/or NOE-connected spin systems. SPI estimates the likelihood of nuclear spin resonances appearing at defined frequencies given sets of cross-peaks measured from multi-dimensional experiments. It quantifies spin system matching probabilities via Bayesian inference. The protocol takes advantage of redundancies in the number of connectivities revealed by suites of diverse NMR experiments, systematically tracking the adequacy of each grouping hypothesis. SPI was tested on 2D homonuclear and 2D/3D¹⁵N-edited data recorded from two protein modules, the col 2 domain of matrix metalloproteinase-2 (MMP-2) and the kringle 2 domain of plasminogen, of 60 and 83 amino acid residues, respectively. For these protein domains SPI identifies 95% unambiguous resonance frequencies, a relatively good performance vis-à-vis the reported `manual' (interactive) analyses. Abbreviations and Acronyms: SPI, SPin Identification; BMRB, BioMagResBank (Madison, WI).     

Automated combined assignment of NOESY spectra and three-dimensional protein structure determination

A procedure for automated protein structure determination is presented that is based on an iterative procedure during which the NOESY peak list assignment and the structure calculation are performed simultaneously. The input consists of a list of NOESY peak positions and a list of chemical shifts as obtained from sequence-specific resonance assignment. For the present applications of this approach the previously introduced NOAH routine was implemented in the distance geometry program DIANA. As an illustration, experimental 2D and 3D NOESY cross-peak lists of six proteins have been analyzed, for which complete sequence-specific ¹H assignments are available for the polypeptide backbone and the amino acid side chains. The automated method assigned 70–90% of all NOESY cross peaks, which is on average 10% less than with the interactive approach, and only between 0.8% and 2.4% of the automatically assigned peaks had a different assignment than in the corresponding manually assigned peak lists. The structures obtained with NOAH/DIANA are in close agreement with those from manually assigned peak lists, and with both approaches the residual constraint violations correspond to high-quality NMR structure determinations. Systematic comparisons of the bundles of conformers that represent corresponding automatically and interactively determined structures document the absence of significant bias in either approach, indicating that an important step has been made towards automation of structure determination from NMR spectra.     

Automated Protein NMR Structure Determination Using Wavelet De-noised NOESY Spectra

A major time-consuming step of protein NMR structure determination is the generation of reliable NOESY cross peak lists which usually requires a significant amount of manual interaction. Here we present a new algorithm for automated peak picking involving wavelet de-noised NOESY spectra in a process where the identification of peaks is coupled to automated structure determination. The core of this method is the generation of incremental peak lists by applying different wavelet de-noising procedures which yield peak lists of a different noise content. In combination with additional filters which probe the consistency of the peak lists, good convergence of the NOESY-based automated structure determination could be achieved. These algorithms were implemented in the context of the ARIA software for automated NOE assignment and structure determination and were validated for a polysulfide-sulfur transferase protein of known structure. The procedures presented here should be commonly applicable for efficient protein NMR structure determination and automated NMR peak picking. Electronic supplementary material Electronic supplementary material is available for this article at and accessible for authorised users.     

CAMRA: Chemical shift based computer aided protein NMR assignments

A suite of programs called CAMRA (Computer Aided Magnetic Resonance Assignment) has been developed for computer assisted residue-specific assignments of proteins. CAMRA consists of three units: ORB, CAPTURE and PROCESS. ORB predicts NMR chemical shifts for unassigned proteins using a chemical shift database of previously assigned homologous proteins supplemented by a statistically derived chemical shift database in which the shifts are categorized according to their residue, atom and secondary structure type. CAPTURE generates a list of valid peaks from NMR spectra by filtering out noise peaks and other artifacts and then separating the derived peak list into distinct spin systems. PROCESS combines the chemical shift predictions from ORB with the spin systems identified by CAPTURE to obtain residue specific assignments. PROCESS ranks the top choices for an assignment along with scores and confidence values. In contrast to other auto-assignment programs, CAMRA does not use any connectivity information but instead is based solely on matching predicted shifts with observed spin systems. As such, CAMRA represents a new and unique approach for the assignment of protein NMR spectra. CAMRA will be particularly useful in conjunction with other assignment methods and under special circumstances, such as the assignment of flexible regions in proteins where sufficient NOE information is generally not available. CAMRA was tested on two medium-sized proteins belonging to the chemokine family. It was found to be effective in predicting the assignment providing a database of previously assigned proteins with at least 30% sequence identity is available. CAMRA is versatile and can be used to include and evaluate heteronuclear and three-dimensional experiments.     

APART: automated preprocessing for NMR assignments with reduced tedium

MOTIVATION: High-throughput NMR structure determination is a goal that will require progress on many fronts, one of which is rapid resonance assignment. An important rate-limiting step in the resonance assignment process is accurate identification of resonance peaks in the NMR spectra. Peak-picking schemes range from incomplete (which lose essential assignment connectivities) to noisy (which obscure true connectivities with many false ones). We introduce an automated preassignment process that removes false peaks from noisy peak lists by requiring consensus between multiple NMR experiments and exploiting a priori information about NMR spectra. This process is designed to accept multiple input formats and generate multiple output formats, in an effort to be compatible with a variety of user preferences. RESULTS: Automated preprocessing with APART rapidly identifies and removes false peaks from initial peak lists, reduces the burden of manual data entry, and documents and standardizes the peak filtering process. Successful preprocessing is demonstrated by the increased number of correct assignments obtained when data are submitted to an automated assignment program. AVAILABILITY: APART is available from http://sir.lanl.gov/NMR/APART.htm CONTACT: npawley@lanl.gov; rmichalczyk@lanl.gov SUPPLEMENTARY INFORMATION: Manual pages with installation instructions, procedures and screen shots can also be found at http://sir.lanl.gov/NMR/APART_Manual1.pdf.     

Resonance assignment of the NMR spectra of disordered proteins using a multi-objective non-dominated sorting genetic algorithm

A multi-objective genetic algorithm is introduced to predict the assignment of protein solid-state NMR (SSNMR) spectra with partial resonance overlap and missing peaks due to broad linewidths, molecular motion, and low sensitivity. This non-dominated sorting genetic algorithm II (NSGA-II) aims to identify all possible assignments that are consistent with the spectra and to compare the relative merit of these assignments. Our approach is modeled after the recently introduced Monte-Carlo simulated-annealing (MC/SA) protocol, with the key difference that NSGA-II simultaneously optimizes multiple assignment objectives instead of searching for possible assignments based on a single composite score. The multiple objectives include maximizing the number of consistently assigned peaks between multiple spectra (“good connections”), maximizing the number of used peaks, minimizing the number of inconsistently assigned peaks between spectra (“bad connections”), and minimizing the number of assigned peaks that have no matching peaks in the other spectra (“edges”). Using six SSNMR protein chemical shift datasets with varying levels of imperfection that was introduced by peak deletion, random chemical shift changes, and manual peak picking of spectra with moderately broad linewidths, we show that the NSGA-II algorithm produces a large number of valid and good assignments rapidly. For high-quality chemical shift peak lists, NSGA-II and MC/SA perform similarly well. However, when the peak lists contain many missing peaks that are uncorrelated between different spectra and have chemical shift deviations between spectra, the modified NSGA-II produces a larger number of valid solutions than MC/SA, and is more effective at distinguishing good from mediocre assignments by avoiding the hazard of suboptimal weighting factors for the various objectives. These two advantages, namely diversity and better evaluation, lead to a higher probability of predicting the correct assignment for a larger number of residues. On the other hand, when there are multiple equally good assignments that are significantly different from each other, the modified NSGA-II is less efficient than MC/SA in finding all the solutions. This problem is solved by a combined NSGA-II/MC algorithm, which appears to have the advantages of both NSGA-II and MC/SA. This combination algorithm is robust for the three most difficult chemical shift datasets examined here and is expected to give the highest-quality de novo assignment of challenging protein NMR spectra.     

CISA: combined NMR resonance connectivity information determination and sequential assignment

A nearly complete sequential resonance assignment is a key factor leading to successful protein structure determination via NMR spectroscopy. Assuming the availability of a set of NMR spectral peak lists, most of the existing assignment algorithms first use the differences between chemical shift values for common nuclei across multiple spectra to provide the evidence that some pairs of peaks should be assigned to sequentially adjacent amino acid residues in the target protein. They then use these connectivities as constraints to produce a sequential assignment. At various levels of success, these algorithms typically generate a large number of potential connectivity constraints, and it grows exponentially as the quality of spectral data decreases. A key observation used in our sequential assignment program, CISA, is that chemical shift residual signature information can be used to improve the connectivity determination, and thus to dramatically decrease the number of predicted connectivity constraints. Fewer connectivity constraints lead to less ambiguities in the sequential assignment. Extensive simulation studies on several large test datasets demonstrated that CISA is efficient and effective, compared to three most recently proposed sequential resonance assignment programs RANDOM, PACES, and MARS.     

Reliability of exclusively NOESY-based automated resonance assignment and structure determination of proteins

Protein structure determination by NMR can in principle be speeded up both by reducing the measurement time on the NMR spectrometer and by a more efficient analysis of the spectra. Here we study the reliability of protein structure determination based on a single type of spectra, namely nuclear Overhauser effect spectroscopy (NOESY), using a fully automated procedure for the sequence-specific resonance assignment with the recently introduced FLYA algorithm, followed by combined automated NOE distance restraint assignment and structure calculation with CYANA. This NOESY-FLYA method was applied to eight proteins with 63–160 residues for which resonance assignments and solution structures had previously been determined by the Northeast Structural Genomics Consortium (NESG), and unrefined and refined NOESY data sets have been made available for the Critical Assessment of Automated Structure Determination of Proteins by NMR project. Using only peak lists from three-dimensional ¹³C- or ¹⁵N-resolved NOESY spectra as input, the FLYA algorithm yielded for the eight proteins 91–98 % correct backbone and side-chain assignments if manually refined peak lists are used, and 64–96 % correct assignments based on raw peak lists. Subsequent structure calculations with CYANA then produced structures with root-mean-square deviation (RMSD) values to the manually determined reference structures of 0.8–2.0 Å if refined peak lists are used. With raw peak lists, calculations for 4 proteins converged resulting in RMSDs to the reference structure of 0.8–2.8 Å, whereas no convergence was obtained for the four other proteins (two of which did already not converge with the correct manual resonance assignments given as input). These results show that, given high-quality experimental NOESY peak lists, the chemical shift assignments can be uncovered, without any recourse to traditional through-bond type assignment experiments, to an extent that is sufficient for calculating accurate three-dimensional structures.     

2D NMR metabonomic analysis: a novel method for automated peak alignment

MOTIVATION: Comparative metabolic profiling by nuclear magnetic resonance (NMR) is showing increasing promise for identifying inter-individual differences to drug response. Two dimensional (2D) (1)H (13)C NMR can reduce spectral overlap, a common problem of 1D (1)H NMR. However, the peak alignment tools for 1D NMR spectra are not well suited for 2D NMR. An automated and statistically robust method for aligning 2D NMR peaks is required to enable comparative metabonomic analysis using 2D NMR. RESULTS: A novel statistical method was developed to align NMR peaks that represent the same chemical groups across multiple 2D NMR spectra. The degree of local pattern match among peaks in different spectra is assessed using a similarity measure, and a heuristic algorithm maximizes the similarity measure for peaks across the whole spectrum. This peak alignment method was used to align peaks in 2D NMR spectra of endogenous metabolites in liver extracts obtained from four inbred mouse strains in the study of acetaminophen-induced liver toxicity. This automated alignment method was validated by manual examination of the top 50 peaks as ranked by signal intensity. Manual inspection of 1872 peaks in 39 different spectra demonstrated that the automated algorithm correctly aligned 1810 (96.7%) peaks. AVAILABILITY: Algorithm is available upon request.     

VirtualSpectrum,a tool for simulating peak list for multi-dimensional NMR spectra

NMR spectroscopy is a widely used technique for characterizing the structure and dynamics of macromolecules. Often large amounts of NMR data are required to characterize the structure of proteins. To save valuable time and resources on data acquisition, simulated data is useful in the developmental phase, for data analysis, and for comparison with experimental data. However, existing tools for this purpose can be difficult to use, are sometimes specialized for certain types of molecules or spectra, or produce too idealized data. Here we present a fast, flexible and robust tool, VirtualSpectrum, for generating peak lists for most multi-dimensional NMR experiments for both liquid and solid state NMR. It is possible to tune the quality of the generated peak lists to include sources of artifacts from peak overlap, noise and missing signals. VirtualSpectrum uses an analytic expression to represent the spectrum and derive the peak positions, seamlessly handling overlap between signals. We demonstrate our tool by comparing simulated and experimental spectra for different multi-dimensional NMR spectra and analyzing systematically three cases where overlap between peaks is particularly relevant; solid state NMR data, liquid state NMR homonuclear ¹H and ¹⁵N-edited spectra, and 2D/3D heteronuclear correlation spectra of unstructured proteins. We analyze the impact of protein size and secondary structure on peak overlap and on the accuracy of structure determination based on data of different qualities simulated by VirtualSpectrum.     

Protein NMR structure determination with automated NOE-identification in the NOESY spectra using the new software ATNOS

Novel algorithms are presented for automated NOESY peak picking and NOE signal identification in homonuclear 2D and heteronuclear-resolved 3D [¹H,¹H]-NOESY spectra during de novoprotein structure determination by NMR, which have been implemented in the new software ATNOS (automated NOESY peak picking). The input for ATNOS consists of the amino acid sequence of the protein, chemical shift lists from the sequence-specific resonance assignment, and one or several 2D or 3D NOESY spectra. In the present implementation, ATNOS performs multiple cycles of NOE peak identification in concert with automated NOE assignment with the software CANDID and protein structure calculation with the program DYANA. In the second and subsequent cycles, the intermediate protein structures are used as an additional guide for the interpretation of the NOESY spectra. By incorporating the analysis of the raw NMR data into the process of automated de novoprotein NMR structure determination, ATNOS enables direct feedback between the protein structure, the NOE assignments and the experimental NOESY spectra. The main elements of the algorithms for NOESY spectral analysis are techniques for local baseline correction and evaluation of local noise level amplitudes, automated determination of spectrum-specific threshold parameters, the use of symmetry relations, and the inclusion of the chemical shift information and the intermediate protein structures in the process of distinguishing between NOE peaks and artifacts. The ATNOS procedure has been validated with experimental NMR data sets of three proteins, for which high-quality NMR structures had previously been obtained by interactive interpretation of the NOESY spectra. The ATNOS-based structures coincide closely with those obtained with interactive peak picking. Overall, we present the algorithms used in this paper as a further important step towards objective and efficient de novoprotein structure determination by NMR.     

Influence of the completeness of chemical shift assignments on NMR structures obtained with automated NOE assignment

Reliable automated NOE assignment and structure calculation on the basis of a largely complete, assigned input chemical shift list and a list of unassigned NOESY cross peaks has recently become feasible for routine NMR protein structure calculation and has been shown to yield results that are equivalent to those of the conventional, manual approach. However, these algorithms rely on the availability of a virtually complete list of the chemical shifts. This paper investigates the influence of incomplete chemical shift assignments on the reliability of NMR structures obtained with automated NOESY cross peak assignment. The program CYANA was used for combined automated NOESY assignment with the CANDID algorithm and structure calculations with torsion angle dynamics at various degrees of completeness of the chemical shift assignment which was simulated by random omission of entries in the experimental ¹H chemical shift lists that had been used for the earlier, conventional structure determinations of two proteins. Sets of structure calculations were performed choosing the omitted chemical shifts randomly among all assigned hydrogen atoms, or among aromatic hydrogen atoms. For comparison, automated NOESY assignment and structure calculations were performed with the complete experimental chemical shift but under random omission of NOESY cross peaks. When heteronuclear-resolved three-dimensional NOESY spectra are available the current CANDID algorithm yields in the absence of up to about 10% of the experimental ¹H chemical shifts reliable NOE assignments and three-dimensional structures that deviate by less than 2 Å from the reference structure obtained using all experimental chemical shift assignments. In contrast, the algorithm can accommodate the omission of up to 50% of the cross peaks in heteronuclear- resolved NOESY spectra without producing structures with a RMSD of more than 2 Å to the reference structure. When only homonuclear NOESY spectra are available, the algorithm is slightly more susceptible to missing data and can tolerate the absence of up to about 7% of the experimental ¹H chemical shifts or of up to 30% of the NOESY peaks.Abbreviations: BmPBP^A – Bombyx mori pheromone binding protein form A; CYANA – combined assignment and dynamics algorithm for NMR applications; NMR – nuclear magnetic resonance; NOE – nuclear Overhauser effect; NOESY – NOE spectroscopy; RMSD – root-mean-square deviation; WmKT – Williopsis mrakii killer toxin     

More reliable protein NMR peak assignment via improved 2-interval scheduling.

Protein NMR peak assignment refers to the process of assigning a group of "spin systems" obtained experimentally to a protein sequence of amino acids. The automation of this process is still an unsolved and challenging problem in NMR protein structure determination. Recently, protein NMR peak assignment has been formulated as an interval scheduling problem (ISP), where a protein sequence P of amino acids is viewed as a discrete time interval I (the amino acids on P one-to-one correspond to the time units of I), each subset S of spin systems that are known to originate from consecutive amino acids from P is viewed as a "job" j(s), the preference of assigning S to a subsequence P of consecutive amino acids on P is viewed as the profit of executing job j(s) in the subinterval of I corresponding to P, and the goal is to maximize the total profit of executing the jobs (on a single machine) during I. The interval scheduling problem is max SNP-hard in general; but in the real practice of protein NMR peak assignment, each job j(s) usually requires at most 10 consecutive time units, and typically the jobs that require one or two consecutive time units are the most difficult to assign/schedule. In order to solve these most difficult assignments, we present an efficient 13/7-approximation algorithm for the special case of the interval scheduling problem where each job takes one or two consecutive time units. Combining this algorithm with a greedy filtering strategy for handling long jobs (i.e., jobs that need more than two consecutive time units), we obtain a new efficient heuristic for protein NMR peak assignment. Our experimental study shows that the new heuristic produces the best peak assignment in most of the cases, compared with the NMR peak assignment algorithms in the recent literature. The above algorithm is also the first approximation algorithm for a nontrivial case of the well-known interval scheduling problem that breaks the ratio 2 barrier.     

RIBRA--an error-tolerant algorithm for the NMR backbone assignment problem.

We develop an iterative relaxation algorithm called RIBRA for NMR protein backbone assignment. RIBRA applies nearest neighbor and weighted maximum independent set algorithms to solve the problem. To deal with noisy NMR spectral data, RIBRA is executed in an iterative fashion based on the quality of spectral peaks. We first produce spin system pairs using the spectral data without missing peaks, then the data group with one missing peak, and finally, the data group with two missing peaks. We test RIBRA on two real NMR datasets, hbSBD and hbLBD, and perfect BMRB data (with 902 proteins) and four synthetic BMRB data which simulate four kinds of errors. The accuracy of RIBRA on hbSBD and hbLBD are 91.4% and 83.6%, respectively. The average accuracy of RIBRA on perfect BMRB datasets is 98.28%, and 98.28%, 95.61%, 98.16%, and 96.28% on four kinds of synthetic datasets, respectively.     

MyriMatch: highly accurate tandem mass spectral peptide identification by multivariate hypergeometric analysis

Shotgun proteomics experiments are dependent upon database search engines to identify peptides from tandem mass spectra. Many of these algorithms score potential identifications by evaluating the number of fragment ions matched between each peptide sequence and an observed spectrum. These systems, however, generally do not distinguish between matching an intense peak and matching a minor peak. We have developed a statistical model to score peptide matches that is based upon the multivariate hypergeometric distribution. This scorer, part of the "MyriMatch" database search engine, places greater emphasis on matching intense peaks. The probability that the best match for each spectrum has occurred by random chance can be employed to separate correct matches from random ones. We evaluated this software on data sets from three different laboratories employing three different ion trap instruments. Employing a novel system for testing discrimination, we demonstrate that stratifying peaks into multiple intensity classes improves the discrimination of scoring. We compare MyriMatch results to those of Sequest and X!Tandem, revealing that it is capable of higher discrimination than either of these algorithms. When minimal peak filtering is employed, performance plummets for a scoring model that does not stratify matched peaks by intensity. On the other hand, we find that MyriMatch discrimination improves as more peaks are retained in each spectrum. MyriMatch also scales well to tandem mass spectra from high-resolution mass analyzers. These findings may indicate limitations for existing database search scorers that count matched peaks without differentiating them by intensity. This software and source code is available under Mozilla Public License at this URL: http://www.mc.vanderbilt.edu/msrc/bioinformatics/.     

Automated backbone assignment of labeled proteins using the threshold accepting algorithm

The sequential assignment of backbone resonances is the first step in the structure determination of proteins by heteronuclear NMR. For larger proteins, an assignment strategy based on proton side-chain information is no longer suitable for the use in an automated procedure. Our program PASTA (Protein ASsignment by Threshold Accepting) is therefore designed to partially or fully automate the sequential assignment of proteins, based on the analysis of NMR backbone resonances plus C information. In order to overcome the problems caused by peak overlap and missing signals in an automated assignment process, PASTA uses threshold accepting, a combinatorial optimization strategy, which is superior to simulated annealing due to generally faster convergence and better solutions. The reliability of this algorithm is shown by reproducing the complete sequential backbone assignment of several proteins from published NMR data. The robustness of the algorithm against misassigned signals, noise, spectral overlap and missing peaks is shown by repeating the assignment with reduced sequential information and increased chemical shift tolerances. The performance of the program on real data is finally demonstrated with automatically picked peak lists of human nonpancreatic synovial phospholipase A₂, a protein with 124 residues.     

Resolution and sensitivity of high field nuclear magnetic resonance spectroscopy

NMR frequency assignments are usually considered a prerequisite for the analysis of NOESY spectra, in turn required for the calculation of biomolecular structures. In contrast, as we propose here, relatively high numbers of unambiguous NOE identities can be consistently achieved in an automated manner by relying only on grouping resonances into connected spin systems. To achieve this goal, we have developed for proteins two protocols, SPI and BACUS, based on Bayesian inference. SPI (Grishaev and Llinás, 2002c) produces a list of the (1)H resonance frequencies from homo- and hetero-nuclear multidimensional spectra, grouped into effective spin systems. BACUS automatically establishes probabilistic identities of NOESY cross-peaks in terms of the chemical shifts provided by SPI. BACUS requires neither assignment of resonances nor an initial structural model. It successfully copes with chemical shift overlap and does so without cycling through 3D structure calculations. The method exploits the self-consistency of the NOESY graph by taking advantage of a network of J- as well as NOE-connected "reporter" protons sorted via SPI. BACUS was validated by tests on experimental NOESY data recorded for the col 2 and kringle 2 domains.     

Specific peptide patterns of follicular fluids at different growth stages analyzed by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Human follicular fluid (HFF) has been suggested to influence oocyte development potential, and some of HFF proteins may be potential markers for oocyte maturation during follicular development. Using matrix-assisted laser desorption /ionization-time of flight mass spectrometry (MALDI-TOF MS), the presence of specific peptide peaks in HFF which could represent the follicle development potential was evaluated. HFF from different developmental stages were first digested and the resultant peptide mixtures were directly analyzed by MALDI-TOF MS. It was shown that the frequencies of specific peaks demonstrated higher reproducibility than peak intensities after multiple measurements (>or=6 times) per sample. Using this approach, a reliable peak list for each different sample could be generated by combining the information from multiple measurements. By comparing the peak lists from different samples at different growth stages, we found that 5 specific peaks appeared in the 100% frequency category of 6 replicates in all the HFF samples containing mature oocyte. Similarly, such 25 peptide peaks were also identified for HFF containing immature oocyte. These specific peaks could be used to distinguish HFF from different stages as biomarkers related to follicle development and maturation. After searching the protein database, some proteins that are known to be involved in the development and maturation of oocyte were identified, such as apolipoprotein A-I, collagen type IV, integrin, et al. Identification of such proteins in our experiment further proved that the direct analysis of tryptic digests could be of practical value.