A novel multiple-unit sustained release indomethacin-hydroxypropyl methylcellulose delivery system prepared by ionotropic gelation of sodium alginate at elevated temperatures

A multiple-unit indomethacin delivery system based on hydroxypropyl methylcellulose as the hydrophilic carrier material was developed by a novel technique using the insolubility of the cellulose ether at elevated temperatures and the ionotropic gelation of the polysaccharide, sodium alginate with calcium ions. Spherical beads were prepared by dropping hot sodium alginate solution (60°C) containing dispersed drug and dispersed hydroxypropyl methylcellulose into the heated calcium chloride solution. Beads with a combined hydroxypropyl methylcellulose-indomethacin solids content of up to 98% could be prepared because of the processing of a hydroxypropyl methylcellulose dispersion rather than a solution. The beads were characterized by dissolution and scanning electron microscopy. The drug release was controlled by the viscosity grade of the hydroxypropyl methylcellulose and the rate of polymer gelation, and could be sustained over an 8-h period.     

Evaluation of Chitosan/Alginate Beads Using Experimental Design: Formulation and <Emphasis Type="Italic">In Vitro</Emphasis> Characterization

Bovine serum albumin-loaded beads were prepared by ionotropic gelation of alginate with calcium chloride and chitosan. The effect of sodium alginate concentration and chitosan concentration on the particle size and loading efficacy was studied. The diameter of the beads formed is dependent on the size of the needle used. The optimum condition for preparation alginate–chitosan beads was alginate concentration of 3% and chitosan concentration of 0.25% at pH 5. The resulting bead formulation had a loading efficacy of 98.5% and average size of 1,501 μm, and scanning electron microscopy images showed spherical and smooth particles. Chitosan concentration significantly influenced particle size and encapsulation efficiency of chitosan–alginate beads (p < 0.05). Decreasing the alginate concentration resulted in an increased release of albumin in acidic media. The rapid dissolution of chitosan–alginate matrices in the higher pH resulted in burst release of protein drug.     

Encapsulation of Ketoprofen and Ketoprofen Lysinate by Prilling for Controlled Drug Release

In this paper, ketoprofen and ketoprofen lysinate were used as model drugs in order to investigate release profiles of poorly soluble and very soluble drug from sodium alginate beads manufactured by prilling. The effect of polymer concentration, viscosity, and drug/polymer ratio on bead micromeritics and drug release rate was studied. Ketoprofen and ketoprofen lysinate loaded alginate beads were obtained in a very narrow dimensional range when the Cross model was used to set prilling operative conditions. Size distribution of alginate beads in the hydrated state was strongly dependent on viscosity of drug/polymer solutions and frequency of the vibration. The release kinetics of the drugs showed that drug release rate was related with alginate concentration and solubility of the drug. Alginate solutions with concentration higher than 0.50% (w/w) were suitable to prepare ketoprofen gastro-resistant formulation, while for ketoprofen lysinate alginate, concentration should be increased to 1.50% (w/w) in order to retain the drug in gastric environment. Differential scanning calorimetry thermograms and Fourier transform infrared analyses of drug-loaded alginate beads indicated complex chemical interactions between carboxyl groups of the drug and polymer matrix in drug-loaded beads that contribute to the differences in release profile between ketoprofen and ketoprofen lysinate. Total release of the drugs in intestinal medium was dependent on the solubility of the drug and was achieved between 4 and 6 h.     

Papain entrapment in alginate beads for stability improvement and site-specific delivery: Physicochemical characterization and factorial optimization using neural network modeling

This work examines the influence of various process parameters (like sodium alginate concentration, calcium chloride concentration, and hardening time) on papain entrapped in ionotropically cross-linked alginate beads for stability improvement and site-specific delivery to the small intestine using neural network modeling. A 3³ full-factorial design and feed-forward neural network with multilayer perceptron was used to investigate the effect of process variables on percentage of entrapment, time required for 50% and 90% of the enzyme release, particle size, and angle of repose. Topographical characterization was conducted by scanning electron microscopy, and entrapment was confirmed by Fourier transform infrared spectroscopy and differential scanning calorimetry. Times required for 50% (T₅₀) and 90% (T₉₀) of enzyme release were increased in all 3 of the process variables. Percentage entrapment and particle size were found to be directly proportional to sodium alginate concentration and inversely proportional to calcium chloride concentration and hardening time, whereas angle of repose and degree of cross-linking showed exactly opposite proportionality. Beads with >90% entrapment and T₅₀ of <10 minutes could be obtained at the low levels of all 3 of the process variables. The inability of beads to dissolve in acidic environment, with complete dissolution in buffer of pH≥6.8, showed the suitability of beads to release papain into the small intestine. The shelf-life of the capsules prepared using the papain-loaded alginate beads was found to be 3.60 years compared with 1.01 years of the marketed formulation. It can be inferred from the above results that the proposed methodology can be used to prepare papain-loaded alginate beads for stability improvement and site-specific delivery. Published: September 30, 2005     

Stomach-specific drug delivery of 5-fluorouracil using floating alginate beads

A multiple-unit-type oral floating dosage form (FDF) of 5-fluorouracil (5-FU) was developed to prolong gastric residence time, target stomach cancer, and increase drug bioavailability. The floating bead formulations were prepared by dispersing 5-FU together with calcium carbonate into a mixture of sodium alginate and hydroxypropyl methylcellulose solution and then dripping the dispersion into an acidified solution of calcium chloride. Calcium alginate beads were formed, as alginate undergoes ionotropic gelation by calcium ions and carbon dioxide develops from the reaction of carbonate salts with acid. The evolving gas permeated through the alginate matrix, leaving gas bubbles or pores, which provided the beads buoyancy. The prepared beads were evaluated for percent drug loading, drug entrapment efficiency, image, surface topography, buoyancy, and in vitro release. The formulations were optimized for different weight ratios of gas-forming agent and sodium alginate. The beads containing higher amounts of calcium carbonate demonstrated instantaneous, complete, and excellent floating ability over a period of 24 hours. The optimized formulation was subjected to in vivo antitumor studies to check the therapeutic efficacy of the floating dosage forms containing 5-FU against benzo(a)pyrene-induced stomach tumors in albino female mice (Balb/C strain). The multiple-bead FDF was found to reduce the tumor incidence in mice by 74%, while the conventional tablet dosage form reduced this incidence by only 25%. Results indicate that FDF performed significantly better than the simple tablet dosage form. Published: June 22, 2007     

Plant regeneration from alginate-encapsulated shoot tips of Phylianthus amarus schum and thonn, a medicinally important plant species

Summary A method was developed for plant regeneration from alginate-encapsulated shoot tips of Phyllanthus amarus. Shoot tips excised from in vitro proliferated shoots were encapsulated in calcium alginate beads. The best gel complexation was achieved using 3% sodium alginate and 75 mM CaCl₂·2H₂O. Maximum percentage response for conversion of encapsulated shoot tips into plantlets was 90% after 5 wk of culture on Murashige and Skoog (MS) medium without plant growth regulator. The regrowth ability of encapsulated shoot tips was affected by the concentration of sodium alginate, storage duration, and the presence or absence of MS nutrients in calcium alginate beads. Plantlets with well-developed shoot and roots were transferred to pots containing an autoclaved mixture of soilrite and peat moss (1∶1). The conversion of encapsulated shoot tips into plantlets also occurred when calcium alginate beads were directly sown in autoclaved soilrite moistened with 1/4-MS salts. Encapsulation of vegetative propagules in calcium alginate beads can be used as an alternative to synthetic seeds derived from somatic embryos.     

Glucose oxidase release from calcium alginate gel capsules

Diffusion of glucose oxidase within calcium alginate gel capsules has been assayed and the experimental data fitted to a simple semi-empirical power equation, which is used to analyse the solute release from polymeric devices. It was found that an increase in the concentration of sodium alginate and calcium chloride gives rise to a reduction in the enzyme leakage. This was verified when glucose oxidase (GOD) diffusion percentages were compared in capsules with thicknesses of the same order of magnitude but obtained under different experimental conditions. So, the use of sodium alginate and calcium chloride solutions of concentrations 0.5% w/v and 2.6% w/v, respectively, lead to a diffusion percentage of 25 +/- 2. This percentage was reduced to 8 +/- 3 when sodium alginate and calcium chloride concentrations were fixed at 1% w/v and 4% w/v, respectively, even though the thicknesses of the capsules were of the same order of magnitude.     

Artemisia arborescens L essential oil loaded beads: Preparation and characterization

The purpose of this work was to prepare sodium alginate beads as a device for the controlled release of essential oil for oral administration as an antiviral agent. Different formulations were prepared with sodium alginate as a natural polymer and calcium chloride or glutaraldehyde as a cross-linking agent. Loading capacities of between 86% and 100% were obtained in freshly prepared beads by changing exposure time to the cross-linking agent. Drying of the calcium alginate beads caused only a slight decrease in the loading efficiency. The surface morphology of the different bead formulations were studied using scanning electron microscopy (SEM). Stability studies over a 3-month period showed that glutaraldehyde reacted with some components ofArtemisia arborescens L essential oil, changing its composition. Calcium alginate beads showed an in vitro controlled release of the essential oil for the investigated 24 hours, while the use of glutaraldehyde as a cross-linking agent was found not appropriate because of the interactions with azulene derivatives and the low degree of matrix cross-linkage. Published: August 24, 2007     

A novel encapsulation technique for the production of artificial seeds

A novel technique for the encapsulation of plant material in calcium alginate hollow beads was tested. The technique involves suspending plant material (i.e. plant cells, tissues, organs, shoot tips, somatic embryos) in a solution containing carboxymethylcellulose and calcium chloride and then dripping it into a stirred sodium alginate solution. In initial experiments with Daucus carota (carrot), it was found that after 14 days of cultivation, 100 % of seeds encapsulated in calcium alginate hollow beads would germinate in the liquid core and that 13% would burst the capsules. Embryogenic calli developed inside hollow beads and formed somatic embryos while calli in conventional calcium alginate beads became detached from the beads early in development, and no somatic embryogenesis occurred. With Solanum tuberosum (potato), development of calli was observed in 50% of hollow beads. Eighty-one percent of shoot tips encapsulated in hollow beads sprouted and grew out of the capsules. Received: 28 October 1999 / Revision received: 11 February 2000 / Accepted: 22 February 2000     

Sulfasalazine release from alginate-N,O-carboxymethyl chitosan gel beads coated by chitosan

In the present study, spherical beads were prepared from a water-soluble chitosan (N,O-carboxymethyl chitosan, NOCC) and alginate with ionic gelation method. Then, swollen calcium–alginate–NOCC beads were coated with chitosan. To prepare drug loaded beads, sulfasalazine (SA) was added to the initial aqueous polymer solution. The effect of coating, as well as drying procedure, on the swelling behavior of unloaded beads and SA release of drug loaded ones were evaluated in simulated gastrointestinal tract fluid. The rate of swelling and drug release were decreased for air-dried and coated beads in comparison with freeze-dried and uncoated ones, respectively. No burst release of drug was observed from whole tested beads. Chitosan coated beads released approximately 40% of encapsulated drug in simulated gastric and small intestine tract fluid. Based on these results, the chitosan coated alginate–NOCC hydrogel may be used as potential polymeric carrier for colon-specific delivery of sulfasalazine.     

Preparation and characterization of a novel pH-sensitive chitosan-g-poly (acrylic acid)/attapulgite/sodium alginate composite hydrogel bead for controlled release of diclofenac sodium

A series of pH-sensitive composite hydrogel beads composed of chitosan-g-poly (acrylic acid)/attapulgite/sodium alginate (CTS-g-PAA/APT/SA) was prepared as drug delivery matrices crosslinked by Ca²⁺ owing to the ionic gelation of SA. The structure and surface morphology of the composite hydrogel beads were characterized by FTIR and SEM, respectively. pH-sensitivity of these composite hydrogels beads and the release behaviors of drug from them were investigated. The results showed that the composite hydrogel beads had good pH-sensitivity. The cumulative release ratios of diclofenac sodium (DS) from the composite hydrogel beads were 3.76% in pH 2.1 solution and 100% in pH 6.8 solutions within 24 h, respectively. However, the cumulative release ratio of DS in pH 7.4 solution reached 100% within 2 h. The DS cumulative release ratio reduced with increasing APT content from 0 to 50 wt%. The drug release was swelling-controlled at pH 6.8.     

Covalent stabilization of alginate gel for the entrapment of living whole cells

Summary Three methods were developed for preparing alginate gels containing cells that are stable in phosphate containing media. In Method I preformed alginate beads containing entrapped cells were treated with polyethyl eneimine followed by glutaraldehyde. In Method II alginate sol was treated with a carbodiimide and N-hydroxysuccinimide (to form active esters), mixed with cells and extruded into calcium chloride solution. The beads were subsequently cross-linked with polyethyleneimine. In Method III alginate so] was treated with periodate (to form aldehyde groups), mixed with cells and extruded into calcium chloride solution. The beads were subsequently cross-linked with polyethyleneimine. Saccharomyces cerevisiae cells, immobilized in such stabilized gels, exhibited almost the same fermentation activity as the standard preparation. The viability of the immobilized cells was retained during the stabilization procedure as judged from their ability to multiply in the presence of nutrients.The preparations remained stable in phosphate buffer for at least ten days without substantial release of cells. The extent of cross-linking was controlled by varying the time and the concentration of reactants, thus giving preparations ranging from beads with a thin stabilized shell to beads homogeneously stabilized.     

Hydrophobic modification of sodium alginate and its application in drug controlled release

Sodium alginate was hydrophobically modified by coupling of polybutyl methacrylate onto the alginate. The polybutyl methacrylate was previously prepared through polymerization of butyl methacrylate in the presence of 2-amino-ethanethiol as a chain transfer agent. The structure of the product was characterized by Fourier-transformed infrared spectrometry, nuclear magnetic resonance (¹HNMR) and thermogravimetry. The result of fluorescence analysis showed that the hydrophobicity of the modified alginate was obviously increased. The modified alginate conjugate was used for immobilization of bovine serum albumin in the presence of calcium chloride. In addition, the release behavior of the drug-loaded alginate in deionized water and Tris–HCl buffer solution (pH 7.2) was investigated. It was found that the modified sodium alginate possessed prolonged release behavior compared to unmodified sodium alginate, and it had potential application in controlled release as a drug carrier.     

Immobilization of Alginate-Encapsulated Bacillus thuringiensis var. israelensis Containing Different Multivalent Counterions for Mosquito Control

Immobilized techniques have been used widely for the controlled release formulation of mosquitoes. Among the microbial formulations, polymeric matrices play an important role in the controlled release of microbial pesticide at rates sufficiently effective to kill mosquitoes in the field. The advantage of these matrices is that they enhance the stability of both spores and toxin against pH, temperature variations, and UV irradiation. The disadvantage of using calcium alginate beads is that they are unstable upon contact with phosphate of potassium or sodium ions rich in the mosquito habitats. To overcome these problems, attempts were made to encapsulate Bacillus thuringiensis var. israelensis within alginate by using different multivalent counterions, namely, calcium chloride, zinc sulfate, copper sulfate, cobalt chloride, and ferric chloride, and the beads formed were tested for its mosquito larvicidal activity. Among all the beads tested, zinc alginate beads resulted in maximum larvicidal activity of 98% (+/-1.40 SE) against Culex quinquefasciatus IIIrd instar larvae and maximum spore count of 3.36 x 10(5) (+/-5291.50 SE) CFU/ml. Zinc alginate beads maintained their structure for up to 48 h when shaken vigorously on a rotary shaker at 180 rpm in the presence of 10 mM potassium phosphate buffer (pH 6.8 +/- 0.1). In conclusion, our results suggest that the use of zinc sulfate as counterions to encapsulate B. thuringiensis var. israelensis within alginate may be a potent mosquito control program in the habitats where more phosphate ions are present.     

Effect of a small molecule on diffusion and swelling properties of selected polysaccharide gel beads

The effect of a small molecule (e.g., sodium fluorescein, SF) on the swelling properties of and diffusion from calcium polysaccharide (alginate or pectin) gel beads was investigated. The gel beads were prepared by ionotropic gelation, soaked in different concentrations of SF solution, and then dried. The swelling behavior and release of SF from the dried beads were investigated. After soaking in SF, the beads swelled to sizes that depended on the initial concentration of SF. However, the size of the dried beads was independent of the SF concentration. The swelling of the beads occurred quite rapidly and reached a maximum within 2 h. Although most beads swelled to a size which was less than their original size of wet beads, some of them swelled much more than their original wet size. Higher concentration of SF and lower concentration of sodium alginate provided a greater increase in weight. The release profile of SF from dried gel beads in water consists of a burst or a very rapid release phase during the first 60 min followed by a much slower release phase. The similarity of the relative weight increase and release profiles of SF, suggests that swelling might contribute to release of SF, particularly during the burst phase.     

Ionotropically emulsion gelled polysaccharides beads: Preparation,in vitro and in vivo evaluation

Floating famotidine loaded mineral oil-entrapped emulsion gel (MOEG) beads were prepared by the emulsion–gelation method. Different polysaccharides (sodium alginate and pectin), oil concentrations (10%, 20% and 30% w/w) and drug:polymer (D:P) ratios (1:1, 2:1 and 3:1) were used and their influence on beads uniformity, drug entrapment efficiency (DEE) and in vitro drug release, was studied. The results clearly indicated that retardation of drug release for 4 h was achieved by the oil hydrophobic diffusional barrier, especially in the presence of the compact network of alginate beads. Calcium alginate beads containing 20% oil and 2:1 D:P ratio, showed an optimum DEE of 88.32%. When evaluated in vivo, this formula displayed superior antiulcer activity (>2) over drug suspension or marketed conventional tablets.     

Optimization of critical parameters for immobilization of yeast cells to alginate gel matrix

The optimum concentrations of sodium alginate (wt. %), calcium chloride (M) and yeast cells (wt. %), and curing time (h) for enhanced gel stability were obtained employing a full factorial search. The results indicate that the concentrations of sodium alginate and CaCl₂, and the curing time of the beads were found to have a pronounced effect on the stability of the beads. The cell concentration, on the other hand, has an adverse influence either individually or in combination with other variables. The path of steepest ascent method has been used to optimize the variables and the resultant gel beads were evaluated for fermentation ability.     

Encapsulation of the peptide Ac-Glu-Thr-Lys-Thr-Tyr-Phe-Trp-Lys-NH2 into polyvinyl alcohol biodegradable formulations—Effect of calcium alginate

It has been recently reported that the peptide Ac-Glu-Thr-Lys-Thr-Tyr-Phe-Trp-Lys-NH₂, analogue of the Glu1811-Lys1818 region of A3 light chain of blood coagulation factor VIII, presents in vitro significant anticoagulant activity. The encapsulation of this peptide into different polyvinyl alcohol formulations is examined here. The formulations were prepared using polyvinyl alcohol cross-linked with either boric acid or glutaraldehyde, giving a series of twelve different hydrogels. In case of PVA-boric acid method, a small percentage of sodium alginate was used in order to avoid bead's agglomeration. In that case, the most efficient encapsulation of the octapeptide (74%) was achieved with 0.2% (w/w) sodium alginate. It was also observed that the increase in sodium alginate percentage leads to beads with increased peptide release time, ranging from 60 to 90 min at 0.02% and 1% (w/w) sodium alginate respectively. The water holding of the PVA gels was estimated to be 27% regardless of the cross-linking reagent used, while it was increased with increasing sodium alginate concentration and reached about 60% for 1% sodium alginate. The longer octapeptide release, at 120 min, was observed with PVA-glutaraldehyde hydrogel, with encapsulation efficiency comparable to those obtained with boric acid, indicating that this hydrogel may be further used in drug delivery systems.     

Plant regeneration from encapsulated nodal segments of Dalbergia sissoo Roxb., a timber-yielding leguminous tree species

One of the alternative methods adopted in recent years is to use biotechnological approaches for improving the tree species. The synthetic seeds offer several advantages, e.g., easy handling, storability, reduced size of propagules, and transportability. Germplasm can be effectively stored in the form of synthetic seeds. A protocol has been developed for plant regeneration from encapsulated nodal segments of Dalbergia sissoo Roxb. Nodal segments collected from basal sprouts of mature trees were encapsulated in calcium alginate beads. Inability of nodal segments entrapped in calcium alginate beads to form root was a major problem. To avoid this problem, an appropriate root induction treatment was given to nodal segments for 10 days, prior to encapsulation to allow formation of root primordia. For synthetic seeds production and subsequent conversion into plantlet, nodal segments with root primordia were encapsulated using sodium alginate and calcium chloride as gelling matrix. The best gel complexation was achieved using 3% sodium alginate and 75 mmol/L CaCl2 2H2O. Maximum percentage response (85%) for conversion of encapsulated nodal segments into plantlets was achieved on 1/2-MS medium without plant growth regulators, after 25 days of culture. The frequency of conversion of encapsulated nodal segments into plantlets affected by the concentration of sodium alginate, and the presence or absence of 1/2-MS nutrients in calcium alginate beads. Plantlets with well developed roots and shoots were transferred to pots containing autoclaved mixture of peat moss and soil (1:1). Plants were also established in pots. The conversion of encapsulated nodal segments into plantlets also occurred when calcium alginate beads having entrapped nodal segments were directly sown in autoclaved peat moss moistened with 1/2-MS0 medium. Out of 60 encapsulated nodal segments, in each experiments, stored at 4 degrees C for 30 days, 44 plants developed under in vitro conditions, and 27 on peat moss moistened with 1/2-MS0.     

Effect of Drug Loading Method on Drug Content and Drug Release from Calcium Pectinate Gel Beads

Drug-loaded calcium pectinate gel (CaPG) beads were prepared by either mixing, absorption, or swelling method. The effects of drug loading method as well as the drug loading factors (i.e., drug concentration, soaking time in drug solution, type of solvent) on drug content and drug release were investigated. The amount of drug uptake (i.e., drug content) into CaPG beads increased as the initial drug concentration increased and varied depending on the loading method. The in vitro release studies in 0.1 N hydrochloric acid (HCl) and pH 6.8 buffer indicated that the drug loading method affected drug release and release parameter, time for 50% of drug release (T ₅₀). The mixing method provided a faster drug release and lower T ₅₀ than the absorption method and swelling method, respectively. This is probably due to higher drug content in CaPG beads. The increased concentration of drug in soaking solution and soaking time resulted in higher drug content and thus faster drug release (lower in T ₅₀ values). When using 0.1 N HCl as solvent for soaking instead of water, the drug release was slower owing to the increase in molecular tortuosity of CaPG beads. The drug release was also affected by pH of the release medium in which drug release in 0.1 N HCl was faster than in pH 6.8 buffer.