Activation of diacylglycerol acyltransferase expressed in Saccharomyces cerevisiae: overexpression of Dga1p lacking the N-terminal region in the ∆snf2 disruptant produces a significant increase in its enzyme activity

We previously found that overexpression of DGA1 encoding diacylglycerol acyltransferase (DGAT) in the ∆snf2 disruptant of Saccharomyces cerevisiae caused a significant increase in lipid accumulation and DGAT activity. The present study was conducted to investigate how Dga1p is activated in the ∆snf2 disruptant. To analyze the expression of Dga1p in wild type and the ∆snf2 disruptant, we overexpressed Dga1p with a 6x His tag at the N-terminus and a FLAG tag at the C-terminus. Immunoblotting using anti-6x His and anti-FLAG antibodies revealed that, in addition to full-length protein, Dga1p lacking the N-terminus was produced only in the ∆snf2 disruptant. Full-length Dga1p and N-terminally truncated Dga1p were separated and purified from the lipid body fraction by using anti-FLAG M2 agarose and TALON metal affinity resin. Major DGAT activity was recovered in the purified fraction of N-terminally truncated Dga1p, indicating that proteolytic cleavage at the N-terminal region is involved in DGAT activation in the ∆snf2 disruptant. Analysis of the cleavage site of N-terminally truncated Dga1p revealed a major site between Lys-29 and Ser-30. We then overexpressed truncated Dga1p variants that lacked different N-terminal amino acids and had a FLAG tag at the C-terminus. The homogenate and lipid body fraction of the ∆snf2 disruptant overexpressing Dga1p lacking the N-terminal 29 amino acids (Dga1∆N2p) had higher DGAT activity than that overexpressing Dga1p, indicating that Dga1∆N2p is activated Dga1p. Dga1∆N2p-FLAG(C-terminus) was purified to near homogeneity by anti-FLAG M2 agarose chromatography and maintained significant DGAT activity. These results provide a new strategy to engineer expression of DGAT.     

Rapid and specific detection of herbicides using a self-assembled photosynthetic reaction center from purple bacterium on an SPR chip

In this study, a direct detection system for herbicides inhibiting photosynthetic electron transfer was developed using the photosynthetic reaction center (RC) from the purple bacterium, Rhodobacter sphaeroides, and surface plasmon resonance (SPR) apparatus. The heavy-subunit-histidine-tagged RCs (HHisRCs) were immobilized on an SPR sensor chip via nickel chelation chemistry as a binder for one of the triazine herbicides, atrazine. Immediately after injection of atrazine solution on the HHisRCs-immobilized chip, the SPR responses increased and reached plateaus within 1 min. The SPR signals were proportional to the sample concentrations of atrazine in the range 1-100 microg/ml. To evaluate the binding specificity to atrazine, chlorinated aromatic herbicides, DCMU and MCPP, were investigated using the HHisRCs-immobilized chip. An RC inhibitor, DCMU, could also be detected with a higher detection limit of 20 microg/ml than atrazine (1 microg/ml). MCPP showed no signals because its inhibition mechanism against plants is different from that of atrazine and DCMU. These results indicated that the sensor chip immobilized RCs could be used for the specific detection of photosynthetic inhibitors.     

Microfluidic systems integrated with two-dimensional surface plasmon resonance phase imaging systems for microarray immunoassay

This study reports a microfluidic chip integrated with an arrayed immunoassay for surface plasmon resonance (SPR) phase imaging of specific bio-samples. The SPR phase imaging system uses a surface-sensitive optical technique to detect two-dimensional (2D) spatial phase variation caused by rabbit immunoglobulin G (IgG) adsorbed on an anti-rabbit IgG film. The microfluidic chip was fabricated by using micro-electro-mechanical-systems (MEMS) technology on glass and polydimethylsiloxane (PDMS) substrates to facilitate well-controlled and reproducible sample delivery and detection. Since SPR detection is very sensitive to temperature variation, a micromachine-based temperature control module comprising micro-heaters and temperature sensors was used to maintain a uniform temperature distribution inside the arrayed detection area with a variation of less than 0.3 degrees C. A self-assembled monolayer (SAM) technique was used to pattern the surface chemistry on a gold layer to immobilize anti-rabbit IgG on the modified substrates. The microfluidic chip is capable of transporting a precise amount of IgG solution by using micropumps/valves to the arrayed detection area such that highly sensitive, highly specific bio-sensing can be achieved. The developed microfluidic chips, which employed SPR phase imaging for immunoassay analysis, could successfully detect the interaction of anti-rabbit IgG and IgG. The interactions between immobilized anti-rabbit IgG and IgG with various concentrations have been measured. The detection limit is experimentally found to be 1 x 10(-4)mg/ml (0.67 nM). The specificity of the arrayed immunoassay was also explored. Experimental data show that only the rabbit IgG can be detected and the porcine IgG cannot be adsorbed. The developed microfluidic system is promising for various applications including medical diagnostics, microarray detection and observing protein-protein interactions.     

Interactions of acid sphingomyelinase and lipid bilayers in the presence of the tricyclic antidepressant desipramine

The tricyclic antidepressant desipramine causes a decrease in cellular acid sphingomyelinase (A-SMase, EC 3.1.4.12) activity when added to culture medium of human fibroblasts. This effect can be prevented by incubation of the cells with the protease inhibitor leupeptin, which suggests that desipramine induces proteolytic degradation of the lysosomal enzyme. By using surface plasmon resonance (SPR, Biacore) we were able to monitor the interactions of A-SMase and substrate-containing lipid bilayers immobilized on the surface of a Pioneer trade mark L1 sensor chip. SPR binding curves show that the enzyme hardly dissociates from the lipid surface at acidic pH values. On the other hand, a drop in binding signals (resonance units, RU) of approximately 50% occurred after injection of 20 mM desipramine. Our findings indicate that desipramine interferes with the binding of A-SMase to the lipid bilayers and thereby displaces the enzyme from its membrane-bound substrate. The application of control substances suggests a key role for the cationic moiety of desipramine. We hypothesize that the displacement of the glycoprotein A-SMase from the inner membranes of late endosomes and lysosomes by desipramine renders it susceptible to proteolytic cleavage by lysosomal proteases.     

Automated SPR-LC-MS/MS system for protein interaction analysis

We have developed a novel automated system to analyze protein complexes by integrating a surface plasmon resonance (SPR) biosensor with highly sensitive nanoflow liquid chromatography-tandem mass spectrometry (LC-MS/MS). A His-tagged protein, which is also tagged with FLAG and biotinylated sequences, was expressed in mammalian cells. After purification by using the His tag from the cell lysate, the sample protein mixture was applied to an SPR biosensor and the protein complex was captured on the sensor chip. The automated SPR-LC-MS/MS was then performed: (1) two-step on-chip purification of the protein complex by using the FLAG and the biotinylated tags, (2) on-chip protease digestion of the complex, and (3) online nanoflow LC-MS/MS analysis of the resulting peptide fragments for protein identification. All of these processes could be monitored in real-time by the SPR biosensor. We validated the performance of the system using either FK506-binding protein 52 kDa (FKBP52) or ribosomal protein S19 (rpS19) as bait. Thus, the fully automated SPR-LC-MS/MS system appeared to be a powerful tool for functional proteomics studies, particularly for snapshot analysis of functional cellular complexes and machines.     

Evaluation of protein kinase activities of cell lysates using peptide microarrays based on surface plasmon resonance imaging

We developed a peptide microarray based on surface plasmon resonance (SPR) imaging for monitoring protein kinase activities in cell lysates. The substrate peptides of kinases were tethered to the microarray surface modified with a self-assembled monolayer of an alkanethiol with triethylene glycol terminus to create a low nonspecific binding surface. The phosphorylation of the substrate peptides immobilized on the surface was detected with the following phosphate specific binders by amplifying SPR signals: anti-phosphotyrosine antibody for tyrosine kinases and Phos-tag biotin (a phosphate-specific ligand with biotin tag) for serine/threonine kinases. Using the microarray, 9 kinds of protein kinases were evaluated as a pattern of phosphorylation of 26 kinds of substrate peptides. The pattern was unique for each protein kinase. The microarray could be used to evaluate the inhibitory activities of kinase inhibitors. The microarray was applied successfully for kinase activity monitoring of cell lysates. The chemical stimuli responsive activity changes of protein kinases in cell lysates could also be monitored by the peptide microarray. Thus, the peptide microarray based on SPR imaging would be applicable to cell-based drug discovery, diagnosis using tissue lysates, and biochemical studies to reveal signal transduction pathways.     

Evaluation of two- and three-dimensional streptavidin binding platforms for surface plasmon resonance spectroscopy studies of DNA hybridization and protein-DNA binding

Surface plasmon resonance (SPR) spectroscopy has been used to study DNA assembly, DNA hybridization, and protein-DNA interactions on two streptavidin (SA) sensor chips. On one chip, SA molecules are immobilized on a biotin-exposed surface, forming an ordered two-dimensional (2D) SA monolayer. The other chip, BIAcore's SA chip, contains SA molecules immobilized within a three-dimensional (3D) carboxylated dextran matrix. Compared to the 2D chip, the 3D SA matrix allows for a slower immobilization rate of biotinylated DNA due to diffusion limitation in the dextran matrix, but with twice the amount of the immobilized DNA due to the greater number of reactive sites, which in turn enables a higher sensitivity for DNA hybridization detection. Interestingly, having a greater DNA probe dispersion in the 3D matrix does not induce a higher DNA hybridization efficiency. In a study of protein binding to immobilized DNA (estrogen receptor to estrogen response elements), aiming at assessing the DNA sequence dependent protein binding behavior, the 2D and 3D chips produce different binding characteristics. On the 2D chip, the protein binding exhibits a better selectivity to the specific sequences, regardless of binding stringency (e.g. salt concentration), whereas on the 3D chip, the liquid handling system needs to be optimized in order to minimize transport limitations and to detect small affinity differences. Through this study we demonstrate that the physicochemical structure of SPR chips affects the apparent binding behaviors of biomolecules. When interpreting SPR binding curves and selecting a sensor chip, these effects should be taken into account.     

Effect of antibody modifications on its biomolecular binding as determined by surface plasmon resonance

A surface plasmon resonance (SPR)-based procedure was developed to determine the effect of antibody modifications on its biomolecular binding behavior. Mouse immunoglobulin G (IgG) was immobilized on a protein A-functionalized gold-coated SPR chip. Goat anti-mouse IgG and its various commercially available modifications (i.e., conjugated with atto 550, atto 647, tetramethylrhodamine isothiocyanate [TRITC], horseradish peroxidase [HRP], or biotin) were employed in exactly the same concentration for the detection of mouse IgG. The various modifications of goat anti-mouse IgG decreased its biomolecular binding to mouse IgG in the order of unmodified>HRP-labeled>atto 550-labeled>biotinylated>TRITC-labeled>atto 647-labeled.     

Fab fragments imprinted SPR biosensor for real-time human immunoglobulin G detection

F(ab) fragments imprinted surface plasmon resonance (SPR) chip was prepared for the real-time detection of human immunoglobulin G (IgG). In order to attach polymerization precursor on SPR chip, the SPR chip surface was modified with allyl mercaptan. F(ab) fragments of the IgG molecules were prepared by papain digestion procedure and collected by fast protein liquid chromatography (FPLC) system using Hi-Trap_r Protein A FF column. The collected F(ab) fragments were complexed with histidine containing specific monomer, N-methacryloyl-l-histidine methyl ester (MAH). Molecular imprinted polymeric nanofilm was prepared on SPR chip in the presence of ethylene glycol dimethacrylate and 2-hydroxyethylmethacrylate. The template molecules, F(ab) fragments, were removed from the polymeric nanofilm using 1M NaCl solution (pH: 7.4, phosphate buffer system). The molecular imprinted SPR chip was characterized by contact angle, atomic force microscopy and Fourier transform infrared spectroscopy. By the real-time IgG detection studies carried out using aqueous IgG solutions in different concentrations, the kinetics and isotherm parameters of the molecular imprinted SPR chip-IgG system were calculated. To show selectivity and specificity of the molecular imprinted SPR chip, competitive kinetic analyses were performed using bovine serum albumin (BSA), IgG, F(ab) and F(c) fragments in singular and competitive manner. As last step, IgG detection studies from human plasma were performed and the measured IgG concentrations were well matched with the results determined by enzyme-linked immunosorbent assay (ELISA). The results obtained with the molecular imprinted SPR chip were well fitted to Langmuir isotherm and the detection limit was found as 56 ng/mL. In the light of the results, we can conclude that the proposed molecular imprinted SPR chip can detect IgG molecules from both aqueous solutions and complex natural samples.     

A surface plasmon resonance-based biosensor with full-length BACE1 in a reconstituted membrane

A surface plasmon resonance (SPR) biosensor-based assay for membrane-embedded full-length BACE1 (β-site amyloid precursor protein cleaving enzyme 1), a drug target for Alzheimer’s disease, has been developed. It allows the analysis of interactions with the protein in its natural lipid membrane environment. The enzyme was captured via an antibody recognizing a C-terminal His6 tag, after which a lipid membrane was reconstituted on the chip using a brain lipid extract. The interaction between the enzyme and several inhibitors confirmed that the surface was functional. It had slightly different interaction characteristics as compared with a reference surface with immobilized ectodomain BACE1 but had the same inhibitor characteristic pH effect. The possibility of studying interactions with BACE1 under more physiological conditions than assays using truncated enzyme or conditions dictated by high enzyme activity is expected to increase our understanding of the role of BACE1 in Alzheimer’s disease and contribute to the discovery of clinically efficient BACE1 inhibitors. The strategy exploited in the current study can be adapted to other membrane-bound drug targets by selecting suitable capture antibodies and lipid mixtures for membrane reconstitution.     

Serum antibody screening by surface plasmon resonance using a natural glycan microarray

A surface plasmon resonance (SPR) based natural glycan microarray was developed for screening of interactions between glycans and carbohydrate-binding proteins (CBPs). The microarray contained 144 glycan samples and allowed the real-time and simultaneous screening for recognition by CBPs without the need of fluorescent labeling. Glycans were released from their natural source and coupled by reductive amination with the fluorescent labels 2-aminobenzamide (2AB) or anthranilic acid (AA) followed by high-performance liquid chromatography (HPLC) fractionation making use of the fluorescent tag. The released and labeled glycans, in addition to fluorescently labeled synthetic glycans and (neo)glycoproteins, were printed on an epoxide-activated chip at fmol amounts. This resulted in covalent immobilization, with the epoxide groups forming covalent bonds to the secondary amine groups present on the fluorescent glycoconjugates. The generated SPR glycan array presented a subset of the glycan repertoire of the human parasite Schistosoma mansoni. In order to demonstrate the usefulness of the array in the simultaneous detection of glycan-specific serum antibodies, the anti-glycan antibody profiles from sera of S. mansoni-infected individuals as well as from non-endemic uninfected controls were recorded. The SPR screening was sensitive for differences between infection sera and control sera, and revealed antibody titers and antibody classes (IgG or IgM). All SPR analyses were performed with a single SPR array chip, which required regeneration and blocking of the chip before the application of a serum sample. Our results indicate that SPR-based arrays constructed from glycans of natural or synthetic origin, pure or as mixture, can be used for determining serum antibody profiles as possible markers for the infection status of an individual.     

Investigation of dual-layer membrane cloaking method by surface plasmon resonance for direct chronoamperometric immunoassay of serum sample

A "dual-layer membrane cloaking" (DLMC) method was developed to construct disposable electrochemical immunosensor for direct determination of serum sample. Mouse IgG (MIgG) molecules were firstly immobilized on a substrate. After the formation of a didodecyldimethylammonium bromide (DDAB) membrane on the MIgG modified substrate, an additional bovine serum albumin (BSA) thin layer was formed to build a BSA/DDAB dual-layer membrane (DLM). When alkaline phosphatase conjugated anti-mouse IgG antibodies (anti-MIgG-ALP) in human serum were incubated on the substrate, anti-MIgG-ALP was recognized specifically by the immobilized MIgG while all nonspecifically adsorbed proteins were selectively removed together with BSA/DDAB DLM by 5% Triton X-100 (v/v) before final measurements. The BSA/DDAB DLM was characterized and optimized by surface plasmon resonance (SPR) technique, and further employed in a disposable immunoassay based on an ITO chip. Under optimal conditions, MIgG in human serum was directly detected in the range of 2.0-18.0 ng mL(-1) without dilution or separation. A limit of detection as low as 0.922 ng mL(-1) (6.15 pM) was obtained. The proposed DLMC method can efficiently prevent the penetration of matrix proteins through single cloaking membrane and completely eliminate nonspecific adsorption. It has great potential in providing a versatile way for direct determination of serum sample with ultra-sensitivity.     

Detection of antigen-antibody interactions by surface plasmon resonance. Application to epitope mapping.

Surface plasmon resonance (SPR) detection requires no labeling of antigen or antibodies and allows quantification of two or more interacting molecular species. The automated SPR instrument used here consists of an optical detection unit, an integrated liquid handling unit, and an autosampler. A first molecule is immobilized to the dextran modified surface of the sensor chip. By sequential introduction, the stepwise formation of multimolecular complexes can then be monitored. A two-site binding assay which allows characterization of MoAb epitope specificities is described. A polyclonal rabbit anti-mouse IgG1 (RAMG1) immobilized to the dextran surface is used to capture the first MoAb from unprocessed hybridoma culture supernatants. After introducing the antigen, the ability of a second MoAb to bind to the antigen is tested. The analysis cycle which is fully automated can be performed more than 100 times using the same RAMG1 surface. Since the detection principle allows monitoring of each reactant in the consecutive formation of a multimolecular complex, multi-site binding experiments can be performed. Five MoAbs recognizing different epitopes on an antigen were shown to bind sequentially, forming a hexamolecular complex. MoAbs were further characterized by inhibition analysis using synthetic peptides derived from the primary structure of their antigen. As a model system MoAbs against recombinant HIV-1 core protein p24 were used in all experiments.     

SPR imaging-based monitoring of caspase-3 activation

The activation of caspase-3 plays an important role in the apoptotic process. In this study, we describe a novel method by which caspase-3-dependent proteolytic cleavage can be monitored, using a surface plasmon resonance (SPR) imaging protein chip system. To the best of our knowledge, this is the first report regarding the SPR imaging-based monitoring of caspase-3 activation. In order to evaluate the performance of this protocol, we constructed a chimeric caspase-3 substrate (GST:DEVD:EGFP) comprised of glutathione S transferase (GST) and enhanced green fluorescent protein (EGFP) with a specialized linker peptide harboring the caspase-3 cleavage sequence, DEVD. Using this reporter, we assessed the cleavage of the artificial caspase-3 substrate in response to caspase-3 using an SPR imaging sensor. The purified GST:DEVD:EGFP protein was initially immobilized onto a glutathionylated gold chip surface, and subsequently analyzed using an SPR imaging system. As a result, caspase-3 activation predicated on the proteolytic properties inherent to substrate specificity could be monitored via an SPR imaging system with a detection performance similar to that achievable by the conventional method, including fluorometric assays. Collectively, our data showed that SPR imaging protein chip system can be effectively utilized to monitor the proteolytic cleavage in caspase-3, thereby potentially enabling the detection of other intracellular protease activation via the alteration of the protease recognition site in the linker peptides.     

Evidence for the role of glycosylation in accessibility of the extracellular domains of human MRP1 (ABCC1)

To enable cell surface localization of the human multidrug resistance protein (MRP1, ABCC1) and to assess the role of the extracellular domains of this transporter, the FLAG epitope tag was introduced into different extracellular loops of the three membrane-spanning domains (MSDs) of the transporter. We constructed and expressed various partially and fully glycosylation-deficient, FLAG-tagged MRP1 proteins in a Vaccinia virus-based transient expression system, and the cell surface expression level of MRP1 on intact cells was followed by flow cytometry, using the FLAG tag specific monoclonal antibody M2. We also expressed the wild-type MRP1 protein and some of the FLAG-tagged mutants in stably transfected HEK293 cells, and followed the cell surface expression and the transport function of MRP1 both by monitoring the efflux of fluorescent substrate and by their ability to confer resistance to HEK293 transfectants to anticancer agents such as daunorubicin and etoposide. When we inserted the FLAG epitope in extracellular loops of the MSD1 or MSD3, the tag was accessible upon removal of N-glycosylation sites (N --> Q at positions 17, 23, and 1006, respectively), whereas the FLAG epitope placed in the MSD2 was not accessible even after removal of all three N-glycosylation sites, indicating that MSD2 region is deeply buried in the plasma membrane. However, all FLAG tagged MRP1 mutants were expressed at the cell surface to the same extent as the wild-type protein and also exhibited normal transport function. Our results demonstrate that the accessibility of the external FLAG epitope is strongly dependent on the position of the tag and the glycosylation state of the different FLAG-tagged MRP1s, and the conformation of extracellular loops in MSD1 and MDS3 does not appear to contribute to the functional status of MRP1.     

A vesicle capture sensor chip for kinetic analysis of interactions with membrane-bound receptors

A novel sensor chip for use in surface plasmon resonance (SPR) biosensors has been developed to capture vesicles which may contain membrane-bound receptors. Sulforhodamine-containing vesicles were shown by fluorescence microscopy to be immobilized intact on the sensor chip. Binding of cholera toxin to captured vesicles containing ganglioside GM(1) was demonstrated using SPR, and the derived kinetic and affinity constants were similar to literature values. Biotinylated vesicles captured on the sensor chip were used to bind streptavidin and then biotinylated ss-DNA. The hybridization of complementary ss-DNA to the immobilized ss-DNA was then analyzed using SPR. The values obtained were similar to those obtained for an identical interaction analyzed using a commercially available streptavidin-containing sensor chip. Binding of vancomycin-group antibiotics to captured vesicles containing a bacterial cell wall mucopeptide analogue was demonstrated. No binding of the bacterial endotoxin Cry1A(c) to captured vesicles containing its cell surface receptor could be demonstrated.     

Immobilized chicken antibodies improve the detection of serum antigens with surface plasmon resonance (SPR)

Surface plasmon resonance (SPR) and other refractive index and mass sensitive methods are, due to complement activation by mouse monoclonal antibodies and with concomitant high background signal, only rarely used for the detection of antibody–antigen interactions in the blood serum milieu. In the present study chicken IgY and mouse IgG were immobilized to a sensor chip CM5 dextran matrix and compared for their background signal and detection of serum antigen. Ellipsometry with antibodies adsorbed to methylated silicon surfaces was used as a complementary detection method. As expected, fundamental differences in binding properties between the two kinds of antibodies were observed. Mouse antibodies bound large quantities of human serum. Human C1q was detected on mouse IgG and the complement system was activated, as seen from the rapid C3 and properdin depositions. Chicken antibodies bound low quantities of human serum and no human C1q. Moreover, C3 and properdin deposited only after prolonged serum incubations. Addition of EDTA to serum reduced the background signal modestly for both IgG and IgY. Serum samples with different concentrations of human C3 were injected over surfaces with immobilized chicken anti-C3, and the response was measured by SPR. Small concentration differences (<1.25 μg/ml) in a physiologically relevant range (1–40 μg/ml after 100 times dilution) could then be detected reproducibly. The SPR signal was totally obscured when a mouse monoclonal anti-C3 antibody was used for the detection.     

Capture molecules preconditioned for kinetic analysis of high-affinity antigen-antibody complex in Biacore A100

Surface plasmon resonance (SPR) is routinely applied on determining association or dissociation constant rates of antigen-antibody complexes. In a SPR system such as Biacore, the capture method is a widely accepted procedure in kinetic analysis for association or dissociation of soluble antigen analytes with antibody ligands initially captured by anti-Fc molecules immobilized on the sensor chip. Appropriate preparations of anti-immunoglobulin G (IgG)-Fc molecules on sensor chips have not been examined yet for stable kinetic analysis of antibodies with several affinities to soluble antigens. Here, we constructed murine monoclonal antibodies (MoAbs) with various affinities to hen egg lysozyme (HEL) and performed kinetic analysis of these MoAbs captured by rat MoAbs against mouse IgG-Fc immobilized on the sensor chip. When capture molecules maximally immobilized on the sensor chip, we observed no apparent dissociation of MoAbs with extremely high affinity to soluble HEL antigens. In contrast, on the limited amount (1000-2000 response units) of capture molecule immobilized on the sensor chip, we could perform stable kinetic analysis of MoAbs with highest affinities to the antigen as well as those with lower or moderate binding affinities. Thus, in some cases, accurate kinetic analysis of high-affinity antibodies can be performed by minimization of capture molecule densities on the sensor chip in SPR.     

Expression and characterization of diacylglycerol acyltransferase from Arabidopsis thaliana in insect cell cultures

Diacylglycerol acyltransferase (DGAT) catalyses the acylation of the sn-3 hydroxy group of sn-1,2-diacylglycerol using acyl-CoA. The gene encoding DGAT from Arabidopsis thaliana has been cloned and the function of the enzyme proved by expression of the coding sequence using a bacculovirus expression system in insect cell cultures. The expressed protein catalysed the synthesis of [(14)C]triacylglycerol from [(14)C]diacylglycerol and oleoyl-CoA. The heterologously expressed DGAT activity was found mostly associated with the 100000 g pellet. The optimum activity was achieved at a neutral pH, in the presence of Mg2+, and at an optimum oleoyl-CoA concentration of 20 microM. The DGAT used the substrates palmitoyl-CoA and oleoyl-CoA equally effectively. In these experiments, the inclusion of recombinant acyl-CoA binding protein had a relatively small effect upon DGAT activity.     

A quantitative study of the interactions of Bacillus anthracis edema factor and lethal factor with activated protective antigen

Bacillus anthracis secretes three proteins, which associate in binary combinations to form toxic complexes at the surface of mammalian cells. Receptor-bound protective antigen (PA) is proteolytically activated, yielding a 63 kDa fragment (PA(63)). PA(63) oligomerizes into heptamers, which bind edema factor (EF) or lethal factor (LF) to form the toxic complexes. We undertook a quantitative analysis of the interactions of EF with PA(63) by means of surface plasmon resonance (SPR) measurements. Heptameric PA(63) was covalently bound by amine coupling to an SPR chip, or noncovalently bound via a C-terminal hexahistidine tag on the protein to Ni(2+)nitrilotriacetate groups on the chip. Values of k(on) and k(off) for EF at 23 degrees C were approximately 3 x 10(5) M(-)(1) s(-)(1) and (3-5) x 10(-)(4) s(-)(1), respectively, giving a calculated K(d) of (1-2) x 10(-)(9) M. A similar value of K(d) (7 x 10(-)(10) M) was obtained when we measured the binding of radiolabeled EF to receptor-bound PA(63) on the surface of L6 cells (at 4 degrees C). Each of these analyses was also performed with LF and LF(N) (the N-terminal 255 residues of LF), and values obtained were comparable to those for EF. The similarity in the dissociation constants determined by SPR and by measurements on the cell surface suggests that the presence of the receptor does not play a large role in the interaction between PA(63) and EF/LF.