Rapid determination of finasteride in human plasma by UPLC–MS/MS and its application to clinical pharmacokinetic study

A rapid, specific, and sensitive method utilizing reversed-phase ultra-performance liquid chromatography tandem mass spectrometry (UPLC–MS/MS) was developed and validated to determine finasteride levels in human plasma. The plasma samples were prepared by liquid–liquid extraction with ethyl acetate, evaporation, and reconstitution. MS/MS analyses were performed on a triple–quadrupole tandem mass spectrometer by monitoring protonated parent → daughter ion pairs at m/z 373 → 305 for finasteride and m/z 237 → 194 for carbamazepine (internal standard, IS). The method was validated with respect to linearity, recovery, specificity, accuracy, precision, and stability. The method exhibited a linear response from 0.1 to 30 ng/mL (r² > 0.998). The limit of quantitation for finasteride in plasma was 0.1 ng/mL. The relative standard deviation (RSD) of intra- and inter-day measurements was less than 15% and the method was accurate within −6.0% to 2.31% at all quality-control levels. The mean extraction recovery was higher than 83% for finasteride and 84% for the IS. Plasma samples containing finasteride were stable under the three sets of conditions tested and the processed samples were stable up to 29 h in an autosampler at 5 °C. Detection and quantitation of both analytes within 3 min make this method suitable for high-throughput analyses. The method was successfully applied to a pharmacokinetic study of finasteride in healthy volunteers following oral administration.     

Substrate stiffness regulates apoptosis and the mRNA expression of extracellular matrix regulatory genes in the rat annular cells

Cells are subjected to static tension of different magnitudes when cultured on substrates with different stiffnesses. It has long been recognized that mechanical stress is an important modulator of the intervertebral disc degeneration. Here we studied the influence of substrate stiffness on cell morphology, apoptosis and extracellular matrix (ECM) metabolism of the rat annulus fibrosus (AF) cells which are known to be mechanosensitive cells. Polyacrylamide gel substrates with three different stiffnesses were prepared by varying the concentration of acrylamide and bisacrylamide, and the elastic modulus of the different gel substrates were measured with atomic force microscopy (AFM). First-passage rat annular cells were cultured on soft, intermediate, rigid substrates or plastics for 24 or 48 h. The percentages of apoptotic cells were detected by flow cytometry and caspase-3 activity, and morphologic changes were visualized by Hoechst 33258 staining and F-actin staining. In addition, the expression of ECM genes (Col1α1, Col2α1, aggrecan, MMP-3, MMP-13 and ADAMTS-5) were analyzed by RT-PCR. The three different substrates had elastic moduli varying between 1 ± 0.23 kPa (soft, 5% gel with 0.06% bis), 32 ± 2.89 kPa (intermediate, 10% gel with 0.13% bis) and 63 ± 3.45 kPa (rigid, 10% gel with 0.26% bis) with a thickness about 60-70 μm. Most of the rat AF cells appeared small and rounded, and lost most of their stress fibers when cultured on soft substrate. There was a significant increase in the percentage of apoptotic cells in the rat AF cells cultured on soft and intermediate substrates relative to those on plastic surface, with a parallel decrease in the area of cell spreading and nucleus. The AF cells grown on intermediate or rigid substrate had reduced expression of Col1α1, Col2α1 and aggrecan and enhanced expression of MMP-3, MMP-13, and ADAMTS-5 at 24 h or 48 h, respectively, relative to those cultured on plastic surface. Conversely, we observed an up-regulation of Col2α1 and aggrecan and no change in the gene expression of MMP-3, MMP-13, and ADAMTS-5 in AF cells on soft substrates. Rat AF cells are sensitive to substrate stiffness which can regulate the morphology, growth, apoptosis and ECM metabolism of rat AF cells, thus indicating the importance of substrate choice for cell transplantation and regeneration for the treatment of disc degeneration using tissue-engineering technique.     

Xanthine microsensor based on polypyrrole molecularly imprinted film modified carbon fiber microelectrodes

A molecularly imprinted polymers (MIPs) microsensor was presented as a carbon fiber microelectrode (CFME) coating for specifically recognizing xanthine (Xan). The polymeric film was obtained based on the imprinted procedure of electropolymerization of pyrrole in the presence of the template molecule Xan by cyclic voltammetry, and template was removed by magnetic stirring. Under the optimum conditions, a satisfactory molecularly binding selectivity of Xan was obtained from the MIPs microsensor with an imprinting factor (IF) of 6.63 and a linear response to concentration in certain ranges. The ranges are from 4.0 × 10⁻⁶ to 6.0 × 10⁻⁵ M and from 8.0 × 10⁻⁵ to 2.0 × 10⁻³ M with a detection limit of 2.5 × 10⁻⁷ M. Meanwhile, good stability (relative standard deviation [RSD] = 3.2%, n = 10) and reproducibility (RSD = 2.0%, n = 10) were observed, and recoveries ranging from 96.9 to 102.5% were calculated when applied to Xan determination in real blood serum samples.     

Improved cryopreservation protocol for Blanca-Celtibérica buck semen collected by electroejaculation

The collection of sperm samples by electroejaculation (EE) leads to an increase of the production of seminal plasma which could modify the tolerance of spermatozoa to the cryopreservation procedure. This study aims to compare a standard sperm cryopreservation protocol for samples collected by artificial vagina (AV) with the same protocol and modifications to this for samples obtained by EE. Semen from six males of Blanca-Celtibérica goat breed was collected by AV (control) and EE, and three experiments were conducted. In Experiment 1, it was examined the effects of egg yolk concentration contained in freezing extender (0%, 1.5%, 10% and 20% of egg yolk); in Experiment 2, it was evaluated the cooling rate from 30 to 5 °C (fast: 10 min and slow: 90 min) and the temperature of glycerol addition (30 and 5 °C); and in Experiment 3, it was examined the time of equilibration at 5 °C (0, 1, 2 or 3 h). A heterologous in vitro fertilization test was carried out in order to compare the fertility of control samples with that resulting from the EE protocol which showed the highest sperm quality. Results showed greater sperm motility parameters after thawing for control samples cryopreserved in standard conditions in the three experiments. For samples collected by EE, extender with 20% egg yolk, a slow cooling rate and a longer equilibration time (3 h) provided higher sperm quality, and no differences were observed between temperatures of glycerol addition. Samples collected by EE and cryopreserved with the protocol which yielded the best sperm quality after thawing showed higher fertility compared to AV.     

Modified nano-TiO2 coupled with fluorescence spectroscopy for the separation/analysis of l-tryptophan

A novel adsorbent of carboxymethyl-β-cyclodextrin modified nanometer TiO₂ (CM-β-CD/TiO₂) was prepared and used as a solid-phase extraction (SPE) material coupled to fluorescence spectroscopy determination of l-tryptophan (l-Trp) in biological samples. The experimental conditions for modified nanometer TiO₂ separation/preconcentration of l-Trp were optimized. The adsorption capacity of CM-β-CD/TiO₂ for l-Trp was 75.2 μg/g. The linear range, detection limit (DL), and the relative standard deviation (RSD) were 0.10-1.20 μg/mL, 18.8 ng/mL, and 0.67% (n = 3, 1.0 μg/mL), respectively, with a preconcentration factor of 10. The developed method was applied to determination of l-Trp in real samples and the recoveries were found to be in the range of 99.2-100.3%. For validation, a comparison material of NIC-140686 sample was analyzed and the determined value was in good agreement with the certified value.     

Synthesis and characterization of a molecularly imprinted polymer and its application as SPE enrichment sorbent for determination of trace methimazole in pig samples using HPLC-UV

A novel molecularly imprinted polymer that could be applied as enrichment sorbent was prepared using methimazole (MMZ) as the template molecule, methacrylic acid as functional monomer, ethylene glycol dimethacrylate as cross-linker. Though evaluated by static, kinetic and competitive adsorption tests, the polymer exhibited high adsorption capacity, fast kinetics and good selective ability. A method for determination of trace MMZ was developed using this polymer as enrichment sorbent coupled with high performance liquid chromatography focusing on complex biological matrices. Under the optimum experimental conditions, the MMZ standard is linear within the concentration range studied, that is, from 0.5 μg L⁻¹ to 150 μg L⁻¹ (r² = 0.9941). Lower limits of detection (LOD, at S/N = 3) and quantification (LOQ, at S/N = 10) in pig samples were 0.63 μg kg⁻¹ and 2.10 μg kg⁻¹ for kidney, 0.51 μg kg⁻¹ and 1.70 μg kg⁻¹ for liver, 0.56 μg kg⁻¹ and 1.86 μg kg⁻¹ for muscle, respectively. Recoveries and relative standard deviation (RSD, n = 9) values for precision in the developed method were from 71.14% to 88.41% and from 2.53% to 6.18%.     

Isolation and characterization of a large soluble form of fibronectin that stimulates adhesion, spreading, and alignment of mouse erythroleukemia cells

Fibronectin (FN) is a major component of the extracellular matrix which plays important roles in a variety of cellular processes including cell adhesion, and migration. The soluble cellular form of FN has a monomer molecular weight of approximately 250 kDa, and generally exists as a dimer of 500 kDa. We have isolated a different form of soluble FN from mouse breast cancer cell line SC115 conditioned medium (CM) and purified it to homogeneity as evidenced by both native polyacrylamide gel electrophoresis (PAGE) and sodium dodecyl sulfate PAGE. It still exhibits a monomeric form of about 250 kDa while its form in the CM is stable and soluble with an apparent tetrameric molecular weight in the range of 800-1000 kDa. This form of FN is a potent cell adhesion factor (AF) that induces adhesion to polystyrene, elongation, spreading, alignment or “track” formation, and migration of mouse erythroleukemia cells. Column fractions homogeneous for AF protein were able to stimulate 10% cell adhesion at concentrations of 23 ng/ml and 1.9 ng/cm². Purified AF induced 50% cell adhesion at 94 ng/ml and 7.5 ng/cm². AF also increased the migration of human aortic smooth muscle and vascular endothelial cells. However, this form of FN differs from other forms as it does not bind tightly to either gelatin or heparin. Studies of this AF should shed light on adhesion of cells to extracellular matrix molecules and on cell migration, both of which are critical in several biological processes such as wound healing, metastasis, matrix formation and structure, and organ development.     

Quantification of corticosteroids in bovine urine using selective solid phase extraction and reversed-phase liquid chromatography/tandem mass spectrometry

This paper presents the development of a simple liquid chromatography–tandem mass spectrometry (LC–MS/MS) method to determine corticosteroids in bovine urine sample matrices. This method uses a single phase extraction (SPE) for cleaning of the sample with an Oasis MAX cartridge at pH 9.0–9.5 and elution by a neutral organic solvent (acetonitrile/dichloromethane), followed by separation on a GEMINI C18 column in the gradient mode with acetate buffer (pH 4.1)/methanol. A triple quadrupole mass spectrometer equipped with a multimode ion source, set to negative atmospheric pressure chemical ionization (APCI) in the multiple reaction monitoring mode was used for detection. The main advantage of this method over other commonly used methods includes the use of SPE with a low volume cartridge for sample preparation and no ion suppression effects from matrix components of the urine samples in the LC–MS/MS analysis. This allowed a reduction the quantification limits (decision limits, CCα) for the first time to 0.1 μg/L (1 and 0.2 μg/L for triamcinolone and flumethasone, respectively). The developed method was validated in accordance with the European Union Commission Decision 2002/657 EC. The recoveries and within-laboratory reproducibility varied from 77% to 115% and 87% to 107.5%, respectively, at 2, 3, and 4 μg/L levels of corticosteroids. The relative standard deviation (RSD) of the measurements was lower than 30%. The decision limit was calculated by multiplying the signal-to-noise ratio by 3 and the obtained values were in the range of 0.1–1.0 μg/L, confirmed by the analysis of twenty blank samples, which were spiked at the desired concentrations. The detection capability was calculated by the addition of the decision limit and the standard deviation followed by multiplication by 1.64 of the within-laboratory reproducibility at 2 μg/L of corticosteroids. The method was applied to four urine samples, giving concentrations of prednisolone (PRED) residues in the range from 0.3 to 0.9 μg/L.     

A simple and sensitive HPLC fluorescence method for determination of tadalafil in mouse plasma

A simple and sensitive high-performance liquid chromatographic (HPLC) method utilizing fluorescence detection was developed for the determination of the phosphodiesterase type 5 inhibitor tadalafil in mouse plasma. This method utilizes a simple sample preparation (protein precipitation) with high recovery of tadalafil (∼98%), which eliminates the need for an internal standard. For constituent separation, the method utilized a monolithic C₁₈ column and a flow rate of 1.0 mL/min with a mobile phase gradient consisting of aqueous trifluoroacetic acid (0.1% TFA in deionized water pH 2.2, v/v) and acetonitrile. The method calibration was linear for tadalafil in mouse plasma from 100 to 2000 ng/mL (r > 0.999) with a detection limit of approximately 40 ng/mL. Component fluorescence detection was achieved using an excitation wavelength of 275 nm with monitoring of the emission wavelength at 335 nm. The intra-day and inter-day precision (relative standard deviation, RSD) values for tadalafil in mouse plasma were less than 14%, and the accuracy (percent error) was within −14% of the nominal concentration. The method was utilized on mouse plasma samples from research evaluating the potential cardioprotective effects of tadalafil on mouse heart tissue exposed to doxorubicin, a chemotherapeutic drug with reported cardiotoxic effects.     

Determination of uric acid in human urine and serum by capillary electrophoresis with chemiluminescence detection

A simple and sensitive method based on capillary electrophoresis (CE) with chemiluminescence (CL) detection has been developed for the determination of uric acid (UA). The sensitive detection was based on the enhancement effect of UA on the CL reaction between luminol and potassium ferricyanide (K₃[Fe(CN)₆]) in alkaline solution. A laboratory-built reaction flow cell and a photon counter were deployed for the CL detection. Experimental conditions for CL detection were studied in detail to achieve a maximum assay sensitivity. Optimal conditions were found to be 1.0 × 10⁻⁴ M luminol added to the CE running buffer and 1.0 × 10⁻⁴ M K₃[Fe(CN)₆] in 0.2 M NaOH solution introduced postcolumn. The proposed CE-CL assay showed good repeatability (relative standard deviation [RSD] = 3.5%, n = 11) and a detection limit of 3.5 × 10⁻⁷ M UA (signal/noise ratio [S/N] = 3). A linear calibration curve ranging from 6.0 × 10⁻⁷ to 3.0 × 10⁻⁵ M UA was obtained. The method was evaluated by quantifying UA in human urine and serum samples with satisfactory assay results.     

Simultaneous determination of vitexin-4″-O-glucoside,vitexin-2″-O-rhamnoside,rutin and vitexin from hawthorn leaves flavonoids in rat plasma by UPLC–ESI-MS/MS

A sensitive and accurate ultra-performance liquid chromatography electrospray ionization tandem mass spectrometry (UPLC–ESI-MS/MS) method was developed and validated for the simultaneous determination of vitexin-4″-O-glucoside (VGL), vitexin-2″-O-rhamnoside (VRH), rutin (RUT) and vitexin (VIT) in rat plasma after intravenous administration of hawthorn leaves flavonoids (HLF). Following protein precipitation by methanol, the analytes were separated on an ACQUITY UPLC BEH C₁₈ column packed with 1.7 μm particles by gradient elution using a mobile phase composed of acetonitrile and water (containing 0.1% formic acid) at a flow rate of 0.20 mL/min. The analytes and diphenhydramine (internal standard, IS) were detected in the multiple reaction monitoring (MRM) mode by means of an electrospray ionization (ESI) interface (m/z 292.96 for vitexin-4″-O-glucoside, m/z 293.10 for vitexin-2″-O-rhamnoside, m/z 299.92 for rutin, m/z 310.94 for vitexin and m/z 166.96 for IS). The calibration curve was linear over the range 10–40,000 ng/mL for vitexin-4″-O-glucoside, 10–50,000 ng/mL for vitexin-2″-O-rhamnoside, 8–1000 ng/mL for rutin and 16–2000 ng/mL for vitexin. The intra- and inter-run precisions (relative standard deviation, RSD) of these analytes were all within 15% and the accuracy (the relative error, RE) ranged from −10% to 10%. The stability experiment indicated that the four analytes in rat plasma samples and plasma extracts under anticipated conditions were stable. The developed method was applied for the first time to pharmacokinetic studies of the four bioactive compounds of hawthorn leaves flavonoids following a single intravenous administration of 20 mg/kg in rats.     

Quantitative analysis of lignocaine and metabolites in equine urine and plasma by liquid chromatography–tandem mass spectrometry

In this paper, a method for the sensitive and reproducible analysis of lignocaine and its four principal metabolites, monoethylxylidide (MEGX), glycylxylidide (GX), 3-hydroxylignocaine (3-HO-LIG), 4-hydroxylignocaine (4-HO-LIG) in equine urine and plasma samples is presented. The method uses liquid chromatography coupled to tandem mass spectrometry operating in electrospray ionisation positive ion mode (+ESI) via multiple reaction monitoring (MRM). Sample preparation involved solid-phase extraction using a mixed-mode phase. The internal standard adopted was lignocaine-d₁₀. Lignocaine and its metabolites were successfully resolved using an octadecylsilica reversed-phase column using a gradient mobile phase of acetonitrile and 0.1% (v/v) aqueous formic acid at a flow rate of 300 μL/min. Target analytes and the internal standard were determined by using the following transitions; lignocaine, 235.2 > 86.1; 3-HO-LIG and 4-HO-LIG, 251.2 > 86.1; MEGX, 207.1 > 58.1; GX, 179.1 > 122.1; and lignocaine-d₁₀, 245.2 > 96.1. Calibration curves were generated over the range 1–100 ng/mL for plasma samples and 1–1000 ng/mL for urine samples. The method was validated for instrument linearity, repeatability and detection limit (IDL), method linearity, repeatability, detection limit (MDL), quantitation limit (LOQ) and recovery. The method was successfully used to analyse both plasma and urine samples following a subcutaneous administration of lignocaine to a thoroughbred horse.     

Esterified glucomannan improves aflatoxin-induced damage of sperm parameters during liquid storage of ram semen at 5 °C

The aim of the present work was to study the effects of aflatoxin (AF) on sperm parameters in rams, and to determine the protective efficiency of esterified glucomannan (EG) co-administered with AF up to 96 h of the liquid storage of ram semen at 5 °C. Thirty-two Merino rams (12–14 months old) were used. The animals were examined for their general health status. To ensure their adaptation to the environment and the new feeding regimen, a 15-day acclimatization programme was applied to the animals, prior to the start of the study. Experimental feeding was continued for ninety-two days. The experimental design consisted of four dietary treatments. The control group (C) was fed with commercial feed. The AF group was fed with commercial feed plus 250 μg/day of total AF. The EG group received commercial feed plus 2 g/day of EG. The AF + EG group was given commercial feed plus 250 μg/day of total AF and 2 g/day of EG. In the study, ejaculates were obtained from rams twice a week for 12 weeks, using an electro-ejaculator. After collected, the ejaculates were diluted with a skimmed milk extender, and stored at 5 °C. Sperm motility and rates of abnormal and nonviable spermatozoa were determined for the different treatment groups at 5 °C at 0, 24, 48, 72 and 96 h of liquid storage.     

Immunoprecipitation on magnetic beads and liquid chromatography-tandem mass spectrometry for carbonic anhydrase II quantification in human serum

In this study, a magnetic bead-based platform amenable to high-throughput protein carbonic anhydrase II (CA II) capture is presented. The key steps in this approach involved immunoaffinity purification of the target protein from serum followed by on-bead digestion with trypsin to release a surrogate peptide. This tryptic peptide was quantified by liquid chromatography-electrospray ionization-tandem mass spectrometry (LC-ESI-MS/MS) operating in multiple reaction monitoring acquisition mode. Using a synthetic peptide standard and a structural analogue free-labeled internal standard, the resulting concentration was stoichiometrically converted to CA II serum concentration. The analytical steps, such as preparation of immunobeads, protein capture, proteolysis, and calibration, were optimized. The method was validated in terms of recovery (77%), reproducibility (relative standard deviation [RSD] < 12%), and method detection limit (0.5 pmol ml⁻¹). The developed method was applied to determining the CA II in eight healthy subjects, and the concentration measured was 27.3 pmol ml⁻¹ (RSD = 65%).     

Electricity generation in single-chamber microbial fuel cells using a carbon source sampled from anaerobic reactors utilizing grass silage

Production of electricity from samples obtained during anaerobic digestion of grass silage was examined using single-chamber air-cathode mediator-less microbial fuel cells (MFCs). The samples were obtained from anaerobic reactors at start-up conditions after 3 and 10 days of operation under psychrophilic (15 °C) and mesophilic (37 °C) temperatures. Electricity was directly produced from all samples at a concentration of 1500 mg COD L⁻¹. Power density obtained from the samples, as a sole carbon source, ranged from 56 ± 3 W m⁻³ to 31 ± 1 W m⁻³ for the mesophilic and psychrophilic samples, respectively. Coulombic efficiencies ranged from 18 ± 1% to 12 ± 1% for the same samples. The relationship between the maximum voltage output and initial COD concentration appeared to follow saturation kinetics at the external resistance of 217 Ω. Chemical oxygen demand (COD) removal was over 90% and total phenolics removal was in the range of 30-75% for all samples tested, with a standard amount of 60 mg L⁻¹ total phenolics removed for every sample. Our results indicate that generating electricity from solution samples of anaerobic reactors utilizing grass silage is possible, opening the possibility for combination of anaerobic digestion with MFC technology for energy generation.     

On-line chemiluminescence determination of mitoxantrone by capillary electrophoresis

A novel capillary electrophoresis (CE) with chemiluminescence (CL) detection method for the determination of mitoxantrone (MTX) has been developed, which based on the CL reaction of potassium ferricyanide with luminol in sodium hydroxide medium sensitized by MTX. Under optimum analytical conditions, MTX is determined over the range of 7.0 × 10⁻⁸–1.0 × 10⁻⁶ M with a detection limit of 1.0 × 10⁻⁸ M. The relative standard deviation (RSD) was 3.7%, 2.6% and 3.0% for 7.0 × 10⁻⁸, 5.0 × 10⁻⁷ and 1.0 × 10⁻⁶ M MTX (n = 11), respectively. In laboratory-built CE–CL apparatus, the proposed method has been applied to determination of MTX in commercial drug and spiked in human urine and plasma with satisfactory results.     

Quantification of CLR1401, a novel alkylphosphocholine anticancer agent,in rat plasma by hydrophilic interaction liquid chromatography–tandem mass spectrometric detection

A rapid and specific LC–MS/MS based bioanalytical method was developed and validated for the determination of 18-(p-iodophenyl)octadecyl phosphocholine (CLR1401), a novel phosphocholine drug candidate, in rat plasma. The optimal chromatographic behavior of CLR1401 was achieved on a Kromasil silica column (50 mm × 3 mm, 5 μm) under hydrophilic interaction chromatography. The total LC analysis time per injection was 2.8 min with a flow rate of 1.5 mL/min under gradient elution. Liquid–liquid extraction in a 96-well format using ethyl acetate was developed and applied for method validation and sample analysis. The method validation was conducted over the curve range of 2.00–1000 ng/mL using 0.0500 mL of plasma sample. The intra- and inter-day precision and accuracy of the quality control samples at low, medium, and high concentration levels showed ≤ 5.9% relative standard deviation (RSD) and −10.8 to −1.4% relative error (RE). The method was successfully applied to determine the toxicokinetics of CLR1401 in rats from three dose groups of 0.4, 4.0, and 10.0 mg/kg/day via intravenous administration.     

Determination of TJ0711 hydrochloride in rat plasma by high performance liquid chromatography with fluorescence detection and its application to pharmacokinetics

In the present study, a simple and sensitive high performance liquid chromatography with fluorescence detection (HPLC-FD) method was developed to determine TJ0711 hydrochloride, a novel α- and β-receptor blocker. TJ0711 hydrochloride and verapamil hydrochloride (the internal standard) were separated on Knauer Eurospher C₁₈ (250 mm × 4.0 mm i.d., 5 μm) column at 50 °C. The mobile phase was methanol:perchloric acid (12 nM, aq) (56:44, v:v), with a flow rate of 1.0 mL/min. The wavelengths of FD were set at 246 nm for excitation and 300 nm for emission. For plasma samples of rats, the analytes were extracted with acetic ether from alkalinized plasma, and then back-extracted into 10 mM dilute sulfuric acid. The linearity was over a concentration range of 20–10,000 ng/mL. The intra- and inter-day precisions referred by relative standard deviation were less than 2.0% and 4.3%, respectively. The mean analytical recoveries of TJ0711 hydrochloride at different concentrations (50, 1000 and 8000 ng/mL) ranged from 88.3% to 92.9%. The lower limit of quantification (LLOQ) was 20 ng/mL. Finally, this method was successfully applied to the estimation of pharmacokinetic parameters of TJ0711 hydrochloride after intravenous doses of 4, 8 and 16 mg/kg in rats.     

Insemination timing affects pregnancy rates in beef cows treated with CO-Synch protocol including an intravaginal progesterone insert

Our objective was to determine the optimal time to artificially inseminate lactating beef cows (Bos taurus typicus) after using the standard CO-Synch protocol that also included a progesterone-releasing, intravaginal controlled internal drug release (CIDR) insert. Cows (N = 605) at three locations were inseminated at four different times after CIDR insert removal and the prostaglandin F_2α administration of the CO-Synch + CIDR protocol: 48, 56, 64, or 72 h. Blood samples were collected 9 to 10 d before and on the day of CIDR insertion. Based on elevated (>1 ng/mL) serum progesterone concentrations, 60% of 605 cows had previously ovulated (were cycling) at the initiation of the study, with a range of 39.6% to 67.9% among locations (P < 0.05). Age of cow, body condition score, and days postpartum affected (P ≤ 0.05) cycling status before ovulation was synchronized. Averaged across treatments, pregnancy rate to artificial insemination (AI) at Day 32 was affected (P ≤ 0.05) by pretreatment cycling status and body condition. Younger cows (≤3 yr) tended to have greater AI pregnancy rates when inseminated at 56 h, whereas older cows had similar pregnancy rates when inseminated at 56 h or later (timing of AI by age interaction; P = 0.085). Pregnancy loss between Days 32 and 63 was greatest (quadratic effect; P < 0.05) when cows were inseminated at 48 and 72 h. In summary, insemination times at or after 56 h improved AI pregnancy rates when using the CO-Synch + CIDR program. Further work is warranted to examine age effects on timing of AI in the CO-Synch + CIDR program.     

Determination of epitestosterone in human urine by off-line immunoaffinity solid-phase extraction coupled with high performance liquid chromatography

Epitestosterone (ET) has been used as a masking agent and prohibited by the World Anti-Doping Agency (WADA) because its administration will decrease the urinary T/ET ratio, a marker of testosterone (T) administration. In this study, an off-line immunoaffinity extraction coupled with high performance liquid chromatography (HPLC) was developed to quantify the endogenous steroid ET in human urine. The immunoaffinity column (IAC) was prepared by immobilizing the anti-ET monoclonal antibodies on CNBr-activated Sepharose 4B, which can remove the contaminations and non-target compounds from matrix to enrich the target analyte ET. The mobile phase was ammonium acetate (10 mM, pH 4.0)/acetonitrile (45/55, v/v) at an isocratic flow of 1.0 mL/min and the UV absorbance detection wavelength was 244 nm for the detection of ET. The IAC showed good reliability and durability since it had been used for more than 100 runs in a year. The limit of quantification (LOQ) was 1 ng/mL. Satisfied repeatability and precision of the day-to-day and within-day were obtained with the RSD values less than 10%. Results of the recovery of the urine samples were ranged from 98% to 102% with repeatability less than 9%, indicating that the method developed can be used for the real urine sample analysis.