Affinity capture of a mammalian DNA polymerase beta by inhibitors immobilized to resins used in solid-phase organic synthesis

The application of resins normally used in solid-phase organic synthesis to the affinity capture of a mammalian DNA polymerase beta (pol beta) is reported. Lithocholic acid (LCA), an inhibitor of pol beta, was immobilized on various solid supports, and the batch affinity purification of pol beta from a mixture of proteins using these LCA-immobilized resins was examined. Of the resins tested, TentaGel was the most effective at purifying pol beta and at resisting nonspecific absorption of proteins. The immobilized LCA recognized pol beta specifically, which resulted in pol beta binding to the resin. Using the LCA-immobilized resin, it was possible to purify pol beta from a mixture of proteins. Furthermore, it was possible to concentrate pol beta from a crude nuclear extract of human T lymphoma Molt4 cells. To facilitate the immobilization of compounds on TentaGel resins, we also designed and prepared photoaffinity beads containing a photoreactive group at the free termini of the TentaGel resin. The pol beta inhibitors LCA, C18-beta-SQDG, and epolactaene were immobilized on the photoaffinity beads by photoreaction. The batch affinity purification of pol beta from a protein mixture could be also achieved with these beads.     

Single-step purification of recombinant Thermus aquaticus DNA polymerase using DNA-aptamer immobilized novel affinity magnetic beads

A DNA aptamer specific for Thermus aquaticus DNA polymerase (Taq-polymerase) was immobilized on magnetic beads, which were prepared in the presented study. The effect of various parameters including pH, temperaturem and aptamer concentration on the immobilization of 5'-thiol labeled DNA-aptamer onto glutaric dialdhyde activated magnetic beads was evaluated. The binding conditions of Taq-polymerase on the aptamer immobilized magnetic beads were studied using commercial Taq-polymerase to characterize the surface complexation reaction. Efficiency of affinity magnetic beads in the purification of recombinant Taq-polymerase from crude extracts was also evaluated. For this case, the enzyme "recombinant Taq-DNA polymerase" was cloned and expressed using an Amersham E. coli GST-Gene Fusion Expression system. Crude extracts were in contact with affinity magnetic beads for 30 min and were collected by magnetic field application. The purity of the eluted Tag-polymerase from the affinity beads, as determined by HPLC, was 93% with a recovery of 89% in a one-step purification protocol. Apparently, the system was found highly effective as one step for the low-cost purification of Taq-polymerase in bacterial crude extract.     

Characterization of high mobility group protein binding to cisplatin-damaged DNA.

cis-Diamminedichloroplatinum (II) (cisplatin, CDDP) is a widely used chemotherapeutic agent. While many tumors are highly responsive to CDDP, certain tumors are resistant to this drug, limiting its efficacy. The anti-tumor activity of CDDP is believed to result from its coordination bonding to chromosomal DNA. Alterations in tumor cell sensitivity to CDDP may result from the presence or absence of protein(s) which specifically recognize CDDP-damaged DNA. We have developed a damaged-DNA affinity precipitation assay that allows the direct identification of cellular proteins that bind to CDDP-damaged DNA. Using this procedure, we have identified several proteins which specifically bind to CDDP-damaged DNA. Two of these proteins have been identified as high mobility group proteins (HMG) 1 and 2 in the current report, we have characterized the binding of these proteins to CDDP-DNA. The calculated Kd of binding to CDDP-damaged DNA was 3.27 x 10(-10) for HMG1 and 1.87 x 10(-10) for HMG2. Using highly specific chemical modifying reagents, we have determined that Cys residues play an important role in protein binding. We also observed that HMG2 will bind to DNA modified with carboplatin and iproplatin although to a lesser extent than to DNA damaged with CDDP. Thus, our results indicate that HMG 2 binds with high affinity to DNA modified with therapeutically active platinum compounds. In addition, our findings suggest that thiol groups play an essential role in the binding of HMG1 and HMG2 to CDDP-DNA.     

Quantitative evaluation of His‐tag purification and immunoprecipitation of tristetraprolin and its mutant proteins from transfected human cells

Histidine (His)‐tag is widely used for affinity purification of recombinant proteins, but the yield and purity of expressed proteins are quite different. Little information is available about quantitative evaluation of this procedure. The objective of this study was to evaluate His‐tag procedure quantitatively and to compare it with immunoprecipitation using radiolabeled tristetraprolin (TTP), a zinc finger protein with anti‐inflammatory property. Human embryonic kidney 293 cells were transfected with wild‐type and nine mutant plasmids with single or multiple phosphorylation site mutation(s) in His‐TTP. These proteins were expressed and mainly localized in the cytosol of transfected cells by immunocytochemistry and confocal microscopy. His‐TTP proteins were purified by Ni‐NTA beads with imidazole elution or precipitated by TTP antibodies from transfected cells after being labeled with [³²P]‐orthophosphate. The results showed that (1) His‐tag purification was more effective than immunoprecipitation for TTP purification; (2) mutations in TTP increased the yield of His‐TTP by both purification procedures; and (3) mutations in TTP increased the binding affinity of mutant proteins for Ni‐NTA beads. These findings suggest that bioengineering phosphorylation sites in proteins can increase the production of recombinant proteins. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009     

Magnetic DNA affinity purification of ecdysteroid receptor.

A new method for rapid purification to near homogeneity of the ecdysteroid receptor (EcdR) from Drosophila melanogaster nuclear extract is presented. In the first step of the purification procedure the EcdR molecules were radiolabelled with [3H]ponasterone A and the [3H]ponasterone A-EcdR complexes were chromatographed under very mild conditions on Fractogel EMD TMAE(s) ion-exchanger. A 23-fold purified receptor was obtained which can be stored in liquid N2 without loss of activity. The second step involved the use of a magnetic DNA affinity technique where the double stranded hsp 27 oligonucleotide containing EcdR binding sequence was biotin 5'-end labelled and bound to monodisperse superparamagnetic particles coated with streptavidin (Dynabeads M-280 Streptavidin) giving magnetic DNA affinity beads. The chromatographed EcdR-ponasterone A complexes were bound to the magnetic DNA affinity beads and by magnetic separation, wash and elution, a 29,000-fold enriched EcdR preparation was obtained within 1.5 h. This procedure can be applied for other EcdR sources with minor modifications.     

Purification of plasmids by triplex affinity interaction.

Production of pharmaceutical grade plasmid DNA is an important issue in gene therapy. We developed a method for affinity purification of plasmids by triple helix interaction. This method is based on sequence-specific binding of an oligonucleotide immobilized on a large pore chromatography support to a target sequence on the plasmid. Using design criteria derived from thermodynamic data, we produced a 15mer target sequence which binds strongly to the affinity support under mildly acidic conditions. Plasmid DNA was purified from clarified Escherichia coli lysate by incubation with the affinity beads at pH 5.0 and high NaCl concentration. After extensive washing of the beads, purified plasmid DNA was eluted with alkaline buffer. The purified plasmid showed no RNA or cell DNA contamination in HPLC analysis and total protein concentration was reduced considerably. Due to its mechanical stability and porosity this support can be used in a continuous affinity purification process, which has a high potential for scale up.     

Selective ligand purification using high-performance affinity beads

Since the development of affinity chromatography, affinity purification technology has been applied to many aspects of biological research, becoming an indispensable tool. Efficient strategies for the identification of biologically active compounds based on biochemical specificity have not yet been established, despite widespread interest in identifying chemicals that directly alter biomolecular functions. Here, we report a novel method for purifying chemicals that specifically interact with a target biomolecule using reverse affinity beads, a receptor-immobilized high-performance solid-phase matrix. When FK506-binding protein 12 (FKBP12) immobilized beads were used in this process, FK506 was efficiently purified in one step either from a mixture of chemical compounds or from fermented broth extract. The reverse affinity beads facilitated identification of drug/receptor complex binding proteins by reconstitution of immobilized ligand/receptor complexes on the beads. When FKBP12/FK506 and FKBP12/rapamycin complexes were immobilized, calcineurin and FKBP/rapamycin-associated protein were purified from a crude cell extract, respectively. These data indicate that reverse affinity beads are powerful tools for identification of both specific ligands and proteins that interact with receptor/ligand complexes.     

Androgen receptor affinity chromatography: synthesis and properties of 17 alpha-epoxypropyl-dihydrotestosterone Sepharose

We have prepared a new affinity chromatography reagent, 17 alpha-epoxypropyl-dihydrotestosterone linked to Thiopropyl-Sepharose, with potential for use in purification of androgen receptor and other specific androgen binding proteins. The linkage is stable, and the ligand has reasonably high affinity for the receptor. Starting with 5 alpha-androstane-3 beta-ol-17-one, we synthesized in two steps 17 alpha-allyl-dihydrotestosterone, which was then oxidized to 17 alpha-epoxypropyl-DHT yielding 2 diastereomers in about a 4:1 ratio. The 17 alpha-allyl-DHT had about 50% of DHT's affinity for rat uterine androgen receptor, while the affinity of the major epoxide isomer was 9% and that of the minor isomer was 4%. Reaction of the epoxides with Thiopropyl-Sepharose-6B gave about 7 mumol of covalently bound DHT per ml of beads. These beads took up 83% of the androgen receptor from a rat uterine cytosol in a preliminary study, which more than equalled the performance of identically prepared estradiol beads successfully used for estrogen receptor purification. The use of the new DHT beads in purifications of the androgen receptor and other binding proteins is now being explored by other laboratories.     

Analysis and isolation of human transferrin receptor using the OKT-9 monoclonal antibody covalently crosslinked to magnetic beads.

A method is described for the use of magnetic beads as a solid phase for the immunoprecipitation of labeled proteins. The anti-human transferrin receptor monoclonal antibody OKT-9 has been coupled to sheep anti-mouse IgG1-coated magnetic beads using the crosslinking agent dimethyl pimelimidate. The transferrin receptor is readily detected by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and autoradiography following immunoprecipitation from 35S-labeled cell lysates. When compared with precipitations using OKT-9 coupled to protein G Sepharose the magnetic beads result in fewer nonspecific bands. The protocol described is generally applicable to the identification of labeled proteins. In addition, because magnetic beads are amenable to covalent crosslinking procedures they can be used for the purification of proteins from complex mixtures. Covalently crosslinked OKT-9 sheep anti-mouse IgG1-coated magnetic beads have been used to affinity purify unlabeled transferrin receptor from cell lysates giving comparable purity and yield to transferrin Sepharose isolated transferrin receptor. The major advantages offered by magnetic beads compared to conventional affinity matrices are low nonspecific binding and the rapidity with which the purification can be performed.     

Purification and characterization of a 200[emsp4 ]kDa fructosyllysine-specific binding protein from cell membranes of U937 cells

Amadori-modified proteins are bound by macrophages and monocytes via fructosyllysine-specific receptors. Detergent extracts from U937 cell membranes were used to purify the binding proteins by affinity purification on glycated polylysine coated magnetic beads followed by SDS-PAGE. Two proteins of 200 and 100[emsp4 ]kDa were isolated. MS-analysis of the 200[emsp4 ]kDa protein showed high homologies with cellular myosin heavy chain, type A. Both fructosyllysine specific binding proteins, cellular myosin heavy chain and nucleolin, are glycosylated.     

Poly(glycidylmethacrylate) brushes generated on poly(VBC) beads by SI-ATRP technique: Hydrazine and amino groups functionalized for invertase adsorption and purification

Crosslinked-poly(vinylbenzylchloride), poly(VBC), beads were prepared by suspension polymerization and poly(glycidylmethacrylate) was grafted by surface-initiated-atom radical polymerization (SI-ATRP) technique. Epoxy groups of the grafted poly(GMA) were reacted with hydrazine and ammonia to create an affinity binding sites. The hydrazine and amine functionalized poly(VBC-g-GMA) beads were used as an affinity support for adsorption of invertase from solution and yeast crude extract. The influence of pH, equilibrium time, ionic strength and initial invertase concentration on the adsorption capacities of both hydrazine and amine functionalized beads has been investigated. Maximum invertase adsorptions onto hydrazine and amine functionalized beads, were 86.7 and 30.4 mg/g at pH 4.0 and 5.5, respectively. The experimental equilibrium data fitted well to the Temkin isotherm model. Finally, the hydrazine functionalized poly(VBC-g-GMA) beads were used for the purification of invertase from crude yeast extract in a batch system and the purity of the eluted invertase from the hydrazine functionalized beads was determined as 92% by HPLC from single step purification protocol.     

Glutathione-S-transferase-green fluorescent protein fusion protein reveals slow dissociation from high site density beads and measures free GSH.

BACKGROUND: Glutathione, a ubiquitous tripeptide, is an important cellular constituent, and measurement of reduced and oxidized glutathione is a measure of the redox state of cells. Glutathione-S-transferase (GST) fusion proteins bind naturally to beads derivatized with glutathione, and elution of such bead-bound fusion proteins with buffer containing millimolar glutathione is a commonly used method of protein purification. Many protein-protein interactions have been established by using GST fusion proteins and measuring binding of fusion protein binding partners by GST pulldown assays, usually monitored by Western blot methodology. METHODS: Dextran beads suitable for flow cytometry were derivatized with glutathione. A fusion protein of GST and green fluorescent protein was used to define kinetic and equilibrium binding characteristics of GST fusion proteins to glutathione beads. Free glutathione competes with this binding, and this competition was used to measure free glutathione concentration. RESULTS: A 10 microl assay can measure 5 microl of 20 microM glutathione (100 pmol glutathione) in 2 h by flow cytometry. This concentration is two orders of magnitude lower than cellular glutathione concentrations, and three orders of magnitude lower than affinity chromatography eluates. One important result is that by generating high site density, the GST fusion proteins can be constrained to the surface of one bead without hopping to the next bead in multiplex assays. CONCLUSIONS: Glutathione in cellular lysates and GST-fusion protein affinity chromatography eluates can be measured by flow cytometry. Many interactions between GST fusion proteins and their fluorescent binding partners should be quantifiable by flow cytometry. Although a system may have the disadvantage that it has a low affinity and a correspondingly quick off-rate in solution, it may remain on beads if the site density can be increased to offer a slow apparent off rate.     

A universally applicable process for preparing stoichiometrically 1:1 labelled functional proteins

A universally applicable labelling and purification process was established to prepare biologically active proteins with a stoichiometric 1:1 ratio of attached dye-label. The dye-label is linked to a specific DNA sequence, which acts as a barcode-like tag for affinity purification. The DNA-dye tag is covalently bound to the target protein, which is present in excess to assure the binding of not more than one dye per molecule. Affinity purification occurs at magnetic beads that are functionalized with oligonucleotides that are complementary to the DNA-tag of the labelled proteins but for one or two mismatches. Washing removes all unbound, unlabelled molecules. The labelled protein is subsequently released by the addition of a fully complementary oligonucleotide. This process allows a gentle purification of a protein fraction that has exactly one label attached to each molecule under conditions that preserve protein structure.     

Bioengineering of Bacteria To Assemble Custom-Made Polyester Affinity Resins

Proof of concept for the in vivo bacterial production of a polyester resin displaying various customizable affinity protein binding domains is provided. This was achieved by engineering various protein binding domains into a bacterial polyester-synthesizing enzyme. Affinity binding domains based on various structural folds and derived from molecular libraries were used to demonstrate the potential of this technique. Designed ankyrin repeat proteins (DARPins), engineered OB-fold domains (OBodies), and V_HH domains from camelid antibodies (nanobodies) were employed. The respective resins were produced in a single bacterial fermentation step, and a simple purification protocol was developed. Purified resins were suitable for most lab-scale affinity chromatography purposes. All of the affinity domains tested produced polyester beads with specific affinity for the target protein. The binding capacity of these affinity resins ranged from 90 to 600 nmol of protein per wet gram of polyester affinity resin, enabling purification of a recombinant protein target from a complex bacterial cell lysate up to a purity level of 96% in one step. The polyester resin was efficiently produced by conventional lab-scale shake flask fermentation, resulting in bacteria accumulating up to 55% of their cellular dry weight as polyester. A further proof of concept demonstrating the practicality of this technique was obtained through the intracellular coproduction of a specific affinity resin and its target. This enables in vivo binding and purification of the coproduced “target protein.” Overall, this study provides evidence for the use of molecular engineering of polyester synthases toward the microbial production of specific bioseparation resins implementing previously selected binding domains.     

Histone deacetylase complexes: functional entities or molecular reservoirs

Using the dextran-binding domain (DBD) of a type of glucosyltransferase (GTF) from Streptococcus sobrinus, we have developed a novel method for purifying recombinant proteins. DBD-tagged green and red fluorescent proteins as well as the parent GTF and DBD moiety were adsorbed well to commercially available cross-linked dextran (such as Sephadex beads and Sephacryl beads), and eluted efficiently with water-soluble dextran. The purity of the eluted proteins after this one-step affinity purification was 90% or better. The results suggest that DBD can be used as a powerful carrier for purification of various recombinant proteins.     

Purification of nuclear factor I by DNA recognition site affinity chromatography

Nuclear factor I (NF-I) is a cellular protein that enhances the initiation of adenovirus DNA replication in vitro. The enhancement of initiation correlates with the ability of NF-I to bind a specific nucleotide sequence within the viral origin of replication. We have developed a method for the purification of NF-I which is based upon the high affinity interaction between the protein and its recognition site. This approach may be generally applicable to the purification of other site-specific DNA binding proteins. The essential feature of the method is a two-step column chromatographic procedure in which proteins are first fractionated on an affinity matrix consisting of nonspecific (Escherichia coli) DNA and then on a matrix that is highly enriched in the specific DNA sequence that is recognized by NF-I. During the first step NF-I coelutes with proteins that have similar general affinity for DNA. During the second step NF-I elutes at a much higher ionic strength than the contaminating nonspecific DNA binding proteins. The DNA recognition site affinity matrix used in the second step is prepared from a plasmid (pKB67-88) that contains 88 copies of the NF-I binding site. This plasmid was constructed by means of a novel cloning strategy that generates concatenated NF-I binding sites arranged exclusively in a direct head to tail configuration. Using this purification scheme, we have obtained a 2400-fold purification of NF-I from crude HeLa nuclear extract with a 57% recovery of specific DNA binding activity. Throughout the purification procedure NF-I retained the ability to enhance the efficiency of initiation of adenovirus DNA replication in vitro. Electrophoresis of the purified fraction on sodium dodecyl sulfate-polyacrylamide gels revealed a population of related polypeptides that ranged in apparent molecular weight from 66,000 to 52,000. The native molecular weight of NF-I deduced from gel filtration and glycerol sedimentation studies is 55,000 and the frictional ratio is 1.3. These results suggest that NF-I exists as a globular monomer in solution.     

Detection of epitope-tagged proteins in flow cytometry: fluorescence resonance energy transfer-based assays on beads with femtomole resolution.

Epitope tagging of expressed proteins is a versatile tool for the detection and purification of the proteins. This approach has been used in protein-protein interaction studies, protein localization, and immunoprecipitation. Among the most popular tag systems is the FLAG epitope tag, which is recognized by three monoclonal antibodies M1, M2, and M5. We describe novel approaches to the detection of epitope-tagged proteins via fluorescence resonance energy transfer on beads. We have synthesized and characterized biotinylated and fluorescein-labeled FLAG peptides and examined the binding of FLAG peptides to commercial streptavidin beads using flow cytometric analysis. A requirement of assay development is the elucidation of parameters that characterize the binding interactions between component systems. We have thus compiled a set of Kd values determined from a series of equilibrium binding experiments with beads, peptides, and antibodies. We have defined conditions for binding biotinylated and fluoresceinated FLAG peptides to beads. Site occupancies of the peptides were determined to be on the order of several million sites per bead and Kd values in the 0.3-2.0 nM range. The affinity for antibody attachment to peptides was determined to be in the low nanomolar range (less than 10 nM) for measurements on beads and solution. We demonstrate the applicability of this methodology to assay development, by detecting femtomole amounts of N-terminal FLAG-bacteria alkaline phosphatase fusion protein. These characterizations form the basis of generalizable and high throughput assays for proteins with known epitopes, for research, proteomic, or clinical applications.     

Novel sulfamethazine ligand used for one-step purification of immunoglobulin G from human plasma

To replace conventional affinity ligand like protein A or protein G, a pseudobioaffinity ligand seems to be an alternative for the purification of immunoglobulin G (IgG). In this study, sulfamethazine (SMZ) was chosen as novel affinity ligand for investigating its affinity to human IgG. Monodisperse, non-porous, cross-linked poly (glycidyl methacrylate) (PGMA) beads were employed as the support for high-performance affinity chromatography. SMZ was immobilized on PGMA beads using bisoxirane (ethanediol diglycigyl ether) as spacer. The resultant affinity media presented minimal non-specific interaction with other proteins. Results of high-performance frontal analysis indicated that the media showed specific affinity to human IgG with a dissociation constant on the order of 10(-6) M. The SMZ affinity column proved useful for a very convenient one-step purification of IgG from human plasma. Antibody purity after a one-step purification was higher than 90%, as determined by densitometric scanning of sodium dodecyl sulfate-polyacrylamide gel electrophoresis of purified fraction under reducing condition. The results obtained indicate that SMZ is a valuable affinity ligand for purification of human IgG.