Structural analysis of staphylococcal bacteriophage phi 11 attachment sites.

The lysogenization of bacteriophage phi 11 in Staphylococcus aureus occurs by site-specific recombination. The DNA segments containing the attachment sites on the host chromosome, the phage genome, and the two junctions created by insertion of the prophage were cloned, and the nucleotide sequences were determined. The attachment sites share a very short common sequence of 10 base pairs.     

Microcin H47 system: an Escherichia coli small genomic island with novel features

Genomic islands are DNA regions containing variable genetic information related to secondary metabolism. Frequently, they have the ability to excise from and integrate into replicons through site-specific recombination. Thus, they are usually flanked by short direct repeats that act as attachment sites, and contain genes for an integrase and an excisionase which carry out the genetic exchange. These mobility events would be at the basis of the horizontal transfer of genomic islands among bacteria.Microcin H47 is a ribosomally-synthesized antibacterial peptide that belongs to the group of chromosome-encoded microcins. The 13 kb-genetic system responsible for its production resides in the chromosome of the Escherichia coli H47 strain and is flanked by extensive and imperfect direct repeats. In this work, both excision and integration of the microcin H47 system were experimentally detected. The analyses were mainly performed in E. coli K12 cells carrying the microcin system cloned in a multicopy plasmid. As expected of a site-specific recombination event, the genetic exchange also occurred in a context deficient for homologous recombination. The DNA sequence of the attachment sites resulting from excision were hybrid between the sequences of the direct repeats. Unexpectedly, different hybrid attachment sites appeared which resulted from recombination in four segments of identity between the direct repeats. Genes encoding the trans-acting proteins responsible for the site-specific recombination were shown to be absent in the microcin H47 system. Therefore, they should be provided by the remaining genetic context, not only in the H47 strain but also in E. coli K12 cells, where both excision and integration occurred. Moreover, a survey of the attachment sites in data banks revealed that they are widely spread among E. coli strains. It is concluded that the microcin system is a small island -H47 genomic island- that would employ a parasitic strategy for its mobility.     

Synaptic intermediates in bacteriophage lambda site-specific recombination: integrase can align pairs of attachment sites.

Bacteriophage lambda uses site-specific recombination to move its DNA into and out of the Escherichia coli genome. The recombination event is mediated by the recombinase integrase (Int) together with several accessory proteins through short specific DNA sequences known as attachment sites. A gel mobility shift assay has been used to show that, in the absence of accessory proteins, Int can align and hold together two DNA molecules, each with an attachment site, to form stable non-covalent 'bimolecular complexes'. Each attachment site must have both core and arm binding sites for Int to participate in a bimolecular complex. These stable structures can be formed between pairs of attL and attP attachment sites, but cannot include attB or attR sites; they are inhibited by integration host factor (IHF) protein. The bimolecular complexes are shown to represent a synaptic intermediate in the reaction in which Int protein promotes the IHF-independent recombination of two attL sites. These complexes should enable a detailed analysis of synapsis for this pathway.     

Transfer RNA genes frequently serve as integration sites for prokaryotic genetic elements.

The DNA sequences were determined at the boundaries of the integrated copy of the archaebacterial genetic element SSV1. A 44 bp sequence present as a single copy on the 15.5 kb circular SSV1 DNA flanked the integrated copy as a direct DNA sequence repeat, suggesting that SSV1 integration occurred by recombination between this 44 bp SSV1 sequence and an identical sequence on the bacterial chromosome. At the left attachment site, a region encompassing the 44 bp attachment core sequence and the 31 nucleotides upstream of it displayed all characteristics expected for an arginine tRNA gene. An analysis of published attachment site sequences of other systems revealed that tRNA genes also constitute the bacterial attachment site in the case of three temperate phages and two transmissible plasmids in eubacteria, indicating a widespread occurrence of tRNA genes as integration target sites. This finding may be important for the understanding of mechanisms and evolution of site-specific recombination.     

Transfer of the symbiotic plasmid of Rhizobium etli CFN42 requires cointegration with p42a, which may be mediated by site-specific recombination

Plasmid p42a from Rhizobium etli CFN42 is self-transmissible and indispensable for conjugative transfer of the symbiotic plasmid (pSym). Most pSym transconjugants also inherit p42a. pSym transconjugants that lack p42a always contain recombinant pSyms, which we designated RpSyms*. RpSyms* do not contain some pSym segments and instead have p42a sequences, including the replication and transfer regions. These novel recombinant plasmids are compatible with wild-type pSym, incompatible with p42a, and self-transmissible. The symbiotic features of derivatives simultaneously containing a wild-type pSym and an RpSym* were analyzed. Structural analysis of 10 RpSyms* showed that 7 shared one of the two pSym-p42a junctions. Sequencing of this common junction revealed a 53-bp region that was 90% identical in pSym and p42a, including a 5-bp central region flanked by 9- to 11-bp inverted repeats reminiscent of bacterial and phage attachment sites. A gene encoding an integrase-like protein (intA) was localized downstream of the attachment site on p42a. Mutation or the absence of intA abolished pSym transfer from a recA mutant donor. Complementation with the wild-type intA gene restored transfer of pSym. We propose that pSym-p42a cointegration is required for pSym transfer; cointegration may be achieved either through homologous recombination among large reiterated sequences or through IntA-mediated site-specific recombination between the attachment sites. Cointegrates formed through the site-specific system but resolved through RecA-dependent recombination or vice versa generate RpSyms*. A site-specific recombination system for plasmid cointegration is a novel feature of these large plasmids and implies that there is unique regulation which affects the distribution of pSym in nature due to the role of the cointegrate in conjugative transfer.     

In vivo and in vitro characterization of site-specific recombination of actinophage R4 integrase

The site-specific integrase of actinophage R4 belongs to the serine recombinase family. During the lysogenization process, it catalyzes site-specific recombination between the phage genome and the chromosome of Streptomyces parvulus 2297. An in vivo assay using Escherichia coli cells revealed that the minimum lengths of the recombination sites attB and attP are 50-bp and 49-bp, respectively, for efficient intramolecular recombination. The in vitro assay using overproduced R4 integrases as a hexahistidine (His(6))-glutathione-S-transferase (GST)-R4 integrase fusion protein, showed that the purified protein preparation retains the site-specific recombination activity which catalyzes the site-specific recombination between attP and attB in the intermolecular reaction. It also revealed that the inverted repeat within attP is essential for efficient in vitro intermolecular recombination. In addition, a gel shift assay showed that His(6)-GST-R4 integrase bound to the 50-bp attB and 49-bp attP specifically. Moreover, based on a detailed comparison analysis of amino acid sequences of serine integrases, we found the DNA binding region that is conserved in the serine recombinase containing the large C-terminal domain. Based on the results presented on this report, attachment sites needed in vitro and in vivo for site-specific recombination by the R4 integrase have been defined more precisely. This knowledge is useful for developing new genetic manipulation tools in the future.     

Determination of the endpoints of partial deletion mutants of the attachment site of bacteriophage lambda by DNA sequencing.

The deletion mutants b508 and b522 of bacteriophage lambda both end within the attachment site. The formation of such deletions is dependent upon the presence of intact integrase, and thus the deletion endpoints may be related to the normal crossover site in site-specific recombination. We have determined the DNA sequences of the attachment site regions of these deletions. Comparison of the sequences with lambda wildtype shows that both the deletions end within the central common homology region but at different positions. The consequences of these findings for current models of site-specific recombination are discussed.     

Site-specific integration of the temperate bacteriophage phi adh into the Lactobacillus gasseri chromosome and molecular characterization of the phage (attP) and bacterial (attB) attachment sites.

The temperate bacteriophage phi adh integrates its genome into the chromosomal DNA of Lactobacillus gasseri ADH by a site-specific recombination process. Southern hybridization analysis of BclI-digested genomic DNA from six relysogenized derivatives of the prophage-cured strain NCK102 displayed phage-chromosomal junction fragments identical to those of the lysogenic parent. The phi adh attachment site sequence, attP, was located within a 365-bp EcoRI-HindIII fragment of phage phi adh. This fragment was cloned and sequenced. DNA sequence analysis revealed striking features common to the attachment sites of other site-specific recombination systems: five direct repeats of the sequence TGTCCCTTTT(C/T) and a 14-bp inverted repeat. Oligonucleotides derived from the sequence of the attP-containing fragment enabled us to amplify predicted junction fragment sequences and thus to identify attL, attR, and attB. The core region was defined as the 16-bp sequence TACACTTCTTAGGAGG. Phage-encoded functions essential for site-specific insertion of phage phi adh were located in a 4.5-kb BclI fragment. This fragment was cloned in plasmid pSA34 to generate the insertional vector pTRK182. Plasmid pTRK182 was introduced into L. gasseri NCK102 by electroporation. Hybridization analysis showed that a single copy of pTRK182 had integrated at the attB site of the NCK102 erythromycin-resistant transformants. This is the first site-specific recombination system described in lactobacilli, as well as the first attP-based site-specific integration vector constructed for L. gasseri ADH.     

Directionality in FLP protein-promoted site-specific recombination is mediated by DNA-DNA pairing

The 2 mu plasmid of the yeast Saccharomyces cerevisiae encodes a site-specific recombination system consisting of plasmid-encoded FLP protein and two recombination sites on the plasmid. The recombination site possesses a specific orientation, which is determined by an asymmetric 8-base pair spacer sequence separating two 13-base pair inverted repeats. The outcome or directionality of site-specific recombination is defined by the alignment of two sites in the same orientation during the reaction. Sites containing point mutations or 1-base pair insertions or deletions within the spacer generally undergo recombination with unaltered sites at reduced levels. In contrast, recombination between the two identical mutant sites (where homology is restored) proceeds efficiently in all cases. Sites containing spacer sequences of 10 base pairs or more are nonfunctional under all conditions. A recombination site in which 5 base pairs are changed to yield an entirely symmetrical spacer sequence again recombines efficiently, but only with an identical site. This reaction, in addition, produces a variety of new products which can only result from random alignment of the two sites undergoing recombination, i.e. the reaction no longer exhibits directionality. These and other results demonstrate that both the efficiency and directionality of site-specific recombination is dependent upon homology between spacer sequences of the two recombining sites. This further implies that critical DNA-DNA interactions between the spacer region of the two sites involved in the reaction occur at some stage during site-specific recombination in this system. The specific spacer sequence itself appears to be unimportant as long as homology is maintained; thus, these sequences are probably not involved in recognition by FLP protein.     

Heteroduplex substrates for bacteriophage lambda site-specific recombination: cleavage and strand transfer products.

Lambda's Int protein acts as a specific topoisomerase at attachment sites, the DNA segments that are required for site-specific recombination. Int cleaves each strand of an attachment site at a unique place and creates strand exchanges by joining broken ends from two different parents. To study the action of Int topoisomerase in more detail, heteroduplex attachment sites were made by annealing strands that are complementary except for a few base pairs that lie in the region between the points of top and bottom strand exchange in the attachment site core. These heteroduplexes appear to interact normally with Int and its accessory proteins IHF and Xis. Although the heteroduplex sites are specifically cleaved by Int topoisomerase, rejoining of the broken DNA is hindered by the lack of Watson--Crick complementarity adjacent to the break. Because of this, heteroduplexes accumulate broken intermediates which are then processed in novel ways. We have used this feature to provide new information about functional differences between attachment sites, to investigate the way Xis protein controls directionality of site-specific recombination, and to demonstrate that Int protein can join strands indiscriminately and can therefore generate recombinants with either of two genetic polarities.     

A novel site-specific recombination system derived from bacteriophage phiMR11

We report identification of a novel site-specific DNA recombination system that functions in both in vivo and in vitro, derived from lysogenic Staphylococcus aureus phage phiMR11. In silico analysis of the phiMR11 genome indicated orf1 as a putative integrase gene. Phage and bacterial attachment sites (attP and attB, respectively) and attachment junctions were determined and their nucleotide sequences decoded. Sequences of attP and attB were mostly different to each other except for a two bp common core that was the crossover point. We found several inverted repeats adjacent to the core sequence of attP as potential protein binding sites. The precise and efficient integration properties of phiMR11 integrase were shown on attP and attB in Escherichia coli and the minimum size of attP was found to be 34bp. In in vitro assays using crude or purified integrase, only buffer and substrate DNAs were required for the recombination reaction, indicating that other bacterially encoded factors are not essential for activity.     

Phage integrases: biology and applications

Phage integrases are enzymes that mediate unidirectional site-specific recombination between two DNA recognition sequences, the phage attachment site, attP, and the bacterial attachment site, attB. Integrases may be grouped into two major families, the tyrosine recombinases and the serine recombinases, based on their mode of catalysis. Tyrosine family integrases, such as lambda integrase, utilize a catalytic tyrosine to mediate strand cleavage, tend to recognize longer attP sequences, and require other proteins encoded by the phage or the host bacteria. Phage integrases from the serine family are larger, use a catalytic serine for strand cleavage, recognize shorter attP sequences, and do not require host cofactors. Phage integrases mediate efficient site-specific recombination between two different sequences that are relatively short, yet long enough to be specific on a genomic scale. These properties give phage integrases growing importance for the genetic manipulation of living eukaryotic cells, especially those with large genomes such as mammals and most plants, for which there are few tools for precise manipulation of the genome. Integrases of the serine family have been shown to work efficiently in mammalian cells, mediating efficient integration at introduced att sites or native sequences that have partial identity to att sites. This reaction has applications in areas such as gene therapy, construction of transgenic organisms, and manipulation of cell lines. Directed evolution can be used to increase further the affinity of an integrase for a particular native sequence, opening up additional applications for genomic modification.     

The geometry of a synaptic intermediate in a pathway of bacteriophage lambda site-specific recombination.

Bacteriophage lambda uses site-specific recombination to move its DNA into and out of the Escherichia coli genome. The recombination event is mediated by the phage-encoded integrase (Int) at short DNA sequences known as attachment ( att ) sites. Int catalyzes recombination via at least four distinct pathways, distinguishable by their requirements for accessory proteins and by the sequence of their substrates. The simplest recombination reaction catalyzed by Int does not require any accessory proteins and takes place between two attL sites. This reaction proceeds through an intermediate known as the straight-L bimolecular complex (SL-BMC), a stable complex which contains two attL sites synapsed by Int. We have investigated the orientation of the two substrates in the SL-BMC with respect to each other using two independent direct methods, a ligation assay and visualization by atomic force microscopy (AFM). Both show that the two DNA substrates in the complex are arranged in a tetrahedral or nearly square planar alignment skewed towards parallel. The DNA molecules in the complex are bent.     

The bacterial attachment site of the temperate Rhizobium phage 16-3 overlaps the 3′ end of a putative proline tRNA gene

Bacteriophage 16-3 inserts its genome into the chromosome of Rhizobium meliloti strain 41 (Rm41) by site-specific recombination. The DNA regions around the bacterial attachment site (attB) and one of the hybrid attachment sites bordering the integrated prophage (attL) were cloned and their nucleotide sequences determined. We demonstrated that the 51 by region, where the phage and bacterial DNA sequences are identical, is active as a target site for phage integration. Furthermore it overlaps the 3′ end of a putative proline tRNA gene. This gene shows 79% similartiy to the corresponding proline tRNA-like genomic target sequence of certain integrative plasmids in Actinomycetes.     

Characterization of site-specific recombination by the integrase MJ1 from enterococcal bacteriophage phiFC1

Bacteriophage phiFC1 integrase (MJ1) was previously shown to perform a site-specific recombination between a phage attachment site (attP) and a host attachment site (attB) in its host, Enterococcus faecalis, and also in a non-host bacterium, Escherichia coli. Here, we investigated biochemical features of MJ1 integrase. First, MJ1 integrase could perform in vitro recombination between attP and attB in the absence of additional factors. Second, MJ1 integrase interacted with att sites. Electrophoretic mobility shift assays and DNase I footprinting revealed that MJ1 integrase could efficiently bind to all the att sites and that MJ1 integrase recognized relatively short sequences (approximately 50 bp) containing an overlapping region within attB and attP. These results demonstrate that MJ1 integrase indeed catalyzes an integrative recombination between attP and attB, the mechanism of which might be simple and unidirectional, as found in serine integrases.     

The phi 80 and P22 attachment sites. Primary structure and interaction with Escherichia coli integration host factor

Although the lambdoid bacteriophage phi 80 and P22 possess site-specific recombination systems analogous to bacteriophage lambda, they have different attachment (att) site specificities. We have identified and determined the nucleotide sequences of the att sites of phi 80 and P22 and have examined the interaction of these sites with purified Escherichia coli integration host factor (IHF). The sizes of the homologous core regions of the att sites vary greatly: P22 has a 46-base pair core, while phi 80 and lambda have 17- and 15-base pair cores, respectively. The core sequences of the three phage show no significant homology, although dispersed regions of homology in arm sequences indicate that the three phage att sites are related. All three att sites have a high A + T composition, and restriction fragments carrying these sites migrate anomalously upon polyacrylamide gel electrophoresis. IHF binds to a site to the left of the common core in the phi 80 and P22 phage att sites (attP) and to a site to the right of the core in P22 attP and attB (the bacterial att site). In the lambda system, IHF interacts with three regions on attP (designated H1, H2, and H') and none on attB (Craig N., and Nash, H.A. (1984) Cell 39, 707-716). Alignment of the IHF sites of all three phage results in a consensus sequence for IHF binding, Pyr-AANNNNTTGATAT. Among the three phage, the number of IHF sites differs; however, the location and orientation of the binding sites in relation to the respective core regions are well conserved. An IHF site analogous to lambda H2 is present in both phi 80 and P22 attP, while a site analogous to lambda H' is present in P22 attP. This conservation suggests that IHF plays a very similar role in the site-specific recombination pathways of all three phage, and that the flanking arm sequences are necessary for phi 80 and P22 attP function, as is the case for lambda attP function. These structural similarities presumably reflect a conservation of the mechanism of site-specific recombination for the three phage.     

Construction of a stepwise gene integration system by transient expression of actinophage R4 integrase in cyanobacterium Synechocystis sp. PCC 6803

The integrase of actinophage R4, which belongs to the large serine-recombinase family, catalyzes site-specific recombination between two distinct attachment site sequences of the phage (attP) and actinomycete Streptomyces parvulus 2297 chromosome (attB). We previously reported that R4 integrase (Sre) catalyzed site-specific recombination both in vivo and in vitro. In the present study, a Sre-based system was developed for the stepwise site-specific integration of multiple genes into the chromosome of cyanobacterium Synechocystis sp. PCC 6803 (hereafter PCC 6803). A transgene-integrated plasmid with two attP sites and a non-replicative sre-containing plasmid were co-introduced into attB-inserted PCC 6803 cells. The transiently expressed Sre catalyzed highly efficient site-specific integration between one of the two attP sites on the integration plasmid and the attB site on the chromosome of PCC 6803. A second transgene-integrated plasmid with an attB site was integrated into the residual attP site on the chromosome by repeating site-specific recombination. The transformation frequencies (%) of the first and second integrations were approximately 5.1 × 10^?5 and 8.2 × 10^?5, respectively. Furthermore, the expression of two transgenes was detected. This study is the first to apply the multiple gene site-specific integration system based on R4 integrase to cyanobacteria.     

Topology of Xer recombination on catenanes produced by lambda integrase.

Xer site-specific recombination at the psi site from plasmid pSC101 displays topological selectivity, such that recombination normally occurs only between directly repeated sites on the same circular DNA molecule. This intramolecular selectivity is important for the biological role of psi, and is imposed by accessory proteins PepA and ArcA acting at accessory DNA sequences adjacent to the core recombination site. Here we show that the selectivity for intramolecular recombination at psi can be bypassed in multiply interlinked catenanes. Xer site-specific recombination occurred relatively efficiently between antiparallel psi sites located on separate rings of right-handed torus catenanes containing six or more nodes. This recombination introduced one additional node into the catenanes. Antiparallel sites on four-noded right-handed catenanes, the normal product of Xer recombination at psi, were not recombined efficiently. Furthermore, parallel psi sites on right-handed torus catenanes were not substrates for Xer recombination. These findings support a model in which psi sites are plectonemically interwrapped, trapping a precise number of supercoils that are converted to four catenation nodes by Xer strand exchange.     

Location of the site-specific recombination system of R46: a function necessary for plasmid maintenance

The R46 site-specific recombination system comprises a per (plasmid-encoded recombinase) gene and a site at which the gene product acts, the per site. The two functions have been cloned into pACYC184. They are encoded by sequences within a region of approximately 2 kb on the R46 genome. These R46 sequences are closely related to the site-specific recombination systems of the ampicillin resistance transposons collectively designated TnA. The R46 per function is interchangeable with the tnpR gene product of TnA. Both enzymes can mediate recombination between the related res and per sites in R46::TnA recombinant plasmids to generate site-specific deletions and inversions. Similar DNA rearrangements occur when TnA inserts into pACYC184 derivatives carrying the cloned R46 per functions. Carriage of this site-specific recombination system contributes to the stable maintenance of R46. By converting plasmid dimers to monomers the R46 per functions help to ensure equal partitioning at cell division.