Comparison of Rhizopus nigricans in a pelleted growth form with some other types of waste microbial biomass as biosorbents for metal ions

Biosorption of metal ions (Li⁺, Ag⁺, Pb²⁺, Cd²⁺, Ni²⁺, Zn²⁺, Cu²⁺, Sr²⁺, Fe²⁺, Fe³⁺ and Al³⁺) by Rhizopus nigricans biomass was studied. It was shown that metal uptake is a rapid and pH-dependent process, which ameliorates with increasing initial pH and metal concentrations. Different adsorption models: Langmuir, Freundlich, split-Langmuir and combined nonspecific-Langmuir adsorption isotherm were applied to correlate the equilibrium data. The maximum biosorption capacities for the individual metal ions were in the range from 160 to 460 mol/g dry weight. Scatchard transformation of equilibrium data revealed diverse natures of biomass metal-binding sites. The binding of metals was also discussed in terms of the hard and soft acids and bases principle. The maximum biosorption capacities and the binding constant of R. nigricans were positively correlated with the covalent index of metal ions.The following types of waste microbial biomass originating as by-products from industrial bioprocesses were tested for biosorption of metal ions: Aspergillus terreus, Saccharomyces cerevisiae, Phanerochaete chrysosporium, Micromonospora purpurea, M. inyoensis and Streptomyces clavuligerus. The determined maximum biosorption capacities were in the range from 100 to 500 mol/g dry weight. The biosorption equilibrium was also represented with Langmuir and Freundlich sorption isotherms.     

Kinetics of ammonium, nitrate and phosphorus uptake by Canna indica and Schoenoplectus validus

Canna indica L. is an upright perennial rhizomatous herb, and Schoenoplectus validus (Vahl) A. Löve and D. Löve is a tall, perennial, herbaceous sedge. The nutrient uptake kinetics of C. indica and S. validus were investigated using the modified depletion method after plants were grown for 4 weeks in simulated secondary-treated wastewater. The maximum uptake rate (I_max) and Michaelis–Menten constant (K_m) were estimated by iterative curve fitting. The I_max for NH₄N (623 μmol g⁻¹ dry root weight h⁻¹) was significantly higher than that for NO₃N (338 μmol g⁻¹ dry root weight h⁻¹) in S. validus. In contrast, no difference was observed in C. indica. The I_max values for NO₃N and NH₄N were higher in S. validus than in C. indica. A significantly lower K_m was detected for NO₃N uptake in C. indica (385 μmol L⁻¹) compared to that in S. validus (1908 μmol L⁻¹). The I_max for PO₄P did not differ between the plant species. The K_m for PO₄P was significantly higher in C. indica (157 μmol L⁻¹) than in S. validus (60 μmol L⁻¹). In conclusion, we found that S. validus preferred NH₄N over NO₃N, had greater capacity for N uptake and higher affinity for PO₄P, but C. indica had greater affinity for NO₃N. Nutrient uptake capacity is likely related to habitat preference, and is influenced by the structure of roots and rhizomes.     

Interaction of Pb and Cd with gum kondagogu (Cochlospermum gossypium): A natural carbohydrate polymer with biosorbent properties

Gum kondagogu (Cochlospermum gossypium), an exudates tree gum from India was explored for its potential to decontaminate toxic metals (Pb²⁺ and Cd²⁺). Optimum biosorption of metals were determined by investigating the contact time, pH, initial concentration of metal ions and biosorbent dose at 25 ± 2 °C. The maximum metal biosorption capacity for gum kondagogu was observed for Pb²⁺ (48.52 mg g⁻¹) and Cd²⁺ (47.48 mg g⁻¹) as calculated by Langmuir isotherm model. Kinetic studies showed that the biosorption rates could be described by pseudo-second-order expression. The metal interactions with biopolymer were assessed by FT-IR, SEM–EDXA and XPS analysis. Results based on these techniques suggest that mechanism of metal binding by the biopolymer involves micro-precipitation, ion-exchange and metal complexation.     

A unique metallothionein-engineered in <Emphasis Type="Italic">Escherichia coli</Emphasis> for biosorption of lead,zinc, and cadmium; absorption or adsorption?

The present study introduced and evaluated modification of E. coli BL21 (DE3) to improve its biosorption capacity by the transfer of the Corynebacterium glutamicum metallothionein gene (C.gMT). The C.gMT sequence was extracted and cloned in pET28a vector and the ligation product was transferred into E. coli BL21 (DE3). It has been also submitted to the GenBank database (accession number KJ638906.1). The performance of the recombinant bacterium was evaluated at different metal ions concentrations, contact times, pH values, and co-ions. The results show that recombinant BL21 (DE3) was able to uptake Pb⁺², and Zn⁺² at greater percentages than could BL21 (DE3). The optimum pH for the removal of each heavy metal was different. As contact time increased, Pb⁺² and Zn⁺² biosorption by the recombinant bacterium increased, while the biosorption of Cd⁺² remained at a nearly steady rate for contact times of more than 1 h. Increasing the concentrations of Pb⁺² and Zn⁺² in solution increased biosorption of these metals by the recombinant BL21 (DE3) over that of Cd⁺². It could be hypothesized that Pb⁺² and Zn⁺² removal by C.gMT-engineered BL21 (DE3) occurred mainly via intracellular biosorption (absorption) and that Cd⁺² was mainly taken up through cell surface biosorption (adsorption).     

Effects of Cadmium, Lead, Mercury and Zinc on °-Aminolevulinic Acid Dehydratase Activity from Radish Leaves

The purpose of the present study was to investigate the in vitro and the in vivo effects of cadmium, zinc, mercury and lead on -aminolevulinic acid dehydratase (ALA-D) activity from radish leaves. The in vivo effect of these metals on growth, DNA and protein content was also evaluated. The results demonstrated that among the elements studied Cd²⁺ presented the highest toxicity for radish. 50% inhibition of ALA-D activity (IC₅₀) in vitro was at 0.39, 2.39, 2.29, and 1.38 mM Cd²⁺, Zn²⁺, Hg²⁺ and Pb²⁺, respectively. After in vivo exposure Cd²⁺, Zn²⁺, Hg²⁺ and Pb²⁺ inhibited ALA-D by about 40, 26, 34 and 15%, respectively. Growth was inhibited by about 40, 10, 25, and 5% by Cd²⁺, Zn²⁺, Hg²⁺, and Pb²⁺, respectively. DNA content was reduced about 35, 30, 20, and 10% for Cd²⁺, Zn²⁺, Hg²⁺, and Pb²⁺, respectively. The metal concentration in radish leaves exposed to Cd²⁺, Zn²⁺, Hg²⁺, and Pb²⁺ was 18, 13, 6, and 7 mol g^–1, respectively. The marked ability of radish to accumulate Cd²⁺ and Zn²⁺ raises the possibility of using this vegetable as a biomonitor of environmental contamination by these metals.     

Inhibition of the biosynthesis ofN-acetylneuraminic acid by metal ions and seleniumin vitro

In liver homogenate the biosynthesis ofN-acetylneuraminic acid usingN-acetylglucosamine as precursor can be followed stepwise by applying different chromatographic procedures. In this cell-free system 16 metal ions (Zn²⁺, Mn²⁺, La³⁺, Co²⁺, Cu²⁺, Hg²⁺, VO ₃ ^– , Pb²⁺, Ce³⁺, Cd²⁺, Fe²⁺, Fe³⁺, Al³⁺, Sn²⁺, Cs⁺ and Li⁺) and the selenium compounds, selenium(IV) oxide and sodium selenite, have been checked with respect to their ability to influence a single or possible several steps of the biosynthesis ofN-acetylneuraminic acid. It could be shown that the following enzymes are sensitive to these metal ions (usually applied at a concentration of 1 mmoll^–1):N-acetylglucosamine kinase (inhibited by Zn²⁺ and vandate), UDP-N-acetylglucosamine-2-epimerase (inhibited by zn²⁺, Co²⁺, Cu²⁺, Hg²⁺, VO ₃ ^– , Pb²⁺, Cd²⁺, Fe³⁺, Cs⁺, Li⁺, selenium(IV) oxide and selenite), andN-acetylmannosamine kinase (inhibited by Zn²⁺, Cu²⁺, Cd²⁺, and Co²⁺). Dose dependent measurements have shown that Zn²⁺, Cu²⁺ and selenite are more efficient inhibitors of UDP-N-acetylglucosamine-2-epimerase than vanadate. As for theN-acetylmannosamine kinase inhibition, a decreasing inhibitory effect exists in the following order Zn²⁺, Cd²⁺, Co²⁺ and Cu²⁺. In contrast, La³⁺, Al³⁺ and Mn²⁺ (1 mmoll^–1) did not interfere with the biosynthesis ofN-acetylneuraminic acid. Thus, the conclusion that the inhibitory effect of the metal ions investigated cannot be regarded as simply unspecific is justified.Dedicated to Professor Theodor Günther on the occasion of his 60th birthday     

Reinforcement of carboxyl groups in the surface of Corynebacterium glutamicum biomass for effective removal of basic dyes

The biomass of Corynebacterium glutamicum was treated with poly(amic acid) to improve the biosorption of Basic Blue 3 (BB3) from aqueous solution. The grafting of poly(amic acid) onto the biomass surface increased the density of the carboxyl groups. The UV-spectrum revealed that strong acidic (pH  2) and basic conditions (pH  11) resulted in the precipitation of BB3. Therefore, pH edge experiments were conducted only within the range 3–10; these results indicated that electrostatic attraction between carboxyl groups of C. glutamicum and BB3 dye cations was favored under alkaline conditions. From the Langmuir model, poly(amic acid)-modified biomass gave a maximum uptake of 173.6 mg/g at pH 9, compared to 52.8 mg/g by the raw biomass. The biosorption kinetics was found to be fast; with equilibrium attained within 10 min. The increase in the ionic strength strongly affected the uptake of BB3 for both forms of C. glutamicum.     

Biosorption of Cd, Cu, Pb, and Zn from aqueous solutions by the fruiting bodies of jelly fungi (Tremella fuciformis and Auricularia polytricha)

In this study, dried and humid fruiting bodies of Tremella fuciformis and Auricularia polytricha were examined as cost-effective biosorbents in treatment of heavy metals (Cd²⁺, Cu²⁺, Pb²⁺, and Zn²⁺) in aqueous solution. The humid T. fuciformis showed the highest capacity to adsorb the four metals in the multi-metal solutions. The Pb²⁺ adsorption rates were 85.5%, 97.8%, 84.8%, and 91.0% by dried T. fuciformis, humid T. fuciformis, dried A. polytricha, and humid A. polytricha, respectively. The adsorption amount of Pb²⁺ by dried and humid T. fuciformis in Cd²⁺ + Pb²⁺, Cu²⁺ + Pb²⁺, Pb²⁺ + Zn²⁺, Cd²⁺ + Cu²⁺ + Pb²⁺, and Cd²⁺ + Zn²⁺ + Pb²⁺ solutions were not lower than that in Pb²⁺ solutions. The results suggested that in humid T. fuciformis, Cd²⁺, Cu²⁺, and Zn²⁺ promoted the Pb²⁺ adsorption by the biomass. In the multi-metal solutions of Cd²⁺ + Cu²⁺ + Pb²⁺ + Zn²⁺, the adsorption amount and rates of the metals by all the test biosorbents were in the order of Pb²⁺ > Cu²⁺ > Zn²⁺ > Cd²⁺. Compared with the pseudo first-order model, the pseudo second-order model described the adsorption kinetics much better, indicating a two-step biosorption process. The present study confirmed that fruiting bodies of the jelly fungi should be useful for the treatment of wastewater containing Cd²⁺, Cu²⁺, Pb²⁺, and Zn²⁺.     

Accumulation of Cd2+ and Pb2+ in the suspension cultures of Agave amaniensis and Costus speciosus and the determination of the culture's growth and phytosteroid content

Cell suspension cultures of Agave amaniensis and Costus speciosus were grown in media containing Cd^{2 +} up to 25 and 20 mg l^–1, respectively, and Pb²⁺ up to 40 mg l^–1. The cultures hyper-accumulated Cd²⁺ up to 900 and 530 g g^–1 and Pb²⁺ up to 1390 and 1170 g g^–1 dry wt. in their respective biomasses. Increasing Pb²⁺ up to 30 mg l^–1 increased the biomass production and total sitosterol content of Costus speciosus by up to 1.7- and 1.3-fold, respectively.     

Luminescent metalloreceptors with pendant macrocyclic ionophore: Synthesis, characterization, electrochemistry and ion-binding study

Metalloreceptors containing ruthenium(II) bipyridine unit as fluorophore and pendant macrocyclic units as ionophore have been synthesized and their luminescence and electrochemical properties have been investigated. Ion-binding study of these fluoroionophore with the anions F⁻, Cl⁻, Br⁻, I⁻, , , , , CH₃COO⁻, and and cations Na⁺, K⁺, Mg²⁺, Ca²⁺, Zn²⁺, Ba²⁺, Sr²⁺ Cd²⁺, Hg²⁺, Pb²⁺ and Cu²⁺, monitored by luminescence and ¹H NMR spectral changes, reveal strong interactions of and F⁻ for 2 and 3 and of Cu²⁺ only for 3. Luminescence titrations for 2 and 3 have been carried out to determine binding constants (K_s), and the calculated values are in the range 2.85 × 10² to 4.48 × 10⁴ M⁻¹. The ¹H NMR spectral changes for 2 and 3 with the addition of increasing concentration of F⁻ and exhibit substantial low-field shift of the CONH proton indicating its involvement in complex formation with the anions. The adduct of 2 and 3 have been isolated and characterized by ¹H and ³¹P NMR, mass and IR spectroscopy. The results are discussed in light of selectivity, structures of the anion bound complexes and their luminescence property.     

Imidazolate-bridged dicopper(II) and copper(II)–zinc(II) complexes of macrocyclic ligand with methylimidazol pendants: Model study of copper(II)–zinc(II) superoxide dismutase

Two new homo- and hetero-dinuclear complexes, [Cu₂L(im)](ClO₄)₃4H₂O (1) and [CuZnL(im)](ClO₄)₃4H₂O (2) (where Im=1H-1midazole and L = 3, 6, 9, 16, 19, 22-hexaaza-6, 19-bis(1H-imidazol-4-ylmethyl)tricycle[22, 2, 2, 2^11,14]triaconta-1, 11, 13, 24, 27, 29-hexaene) were synthesized and characterized as model compounds for the active site of copper(II)–zinc(II) superoxide dismutase (Cu₂Zn₂–SOD). X-ray crystal structure analysis revealed that the metal centers in both complexes exhibit distorted trigonal-bipyramid coordination geometry and the CuCu and CuZn distances are both 6.02 Å. Magnetic and ESR spectral measurements of 1 showed antiferromagnetic exchange interactions between the imidazolate-bridged Cu(II) ions. The ESR spectrum of 2 displays typical signals of mononuclear Cu(II) complex, demonstrating the formation of heterodinuclear complex 2 rather than a mixture of homodinuclear Cu(II)/Zn(II) complexes. pH-dependent ESR and UV–visible spectral measurements manifest that the imidazolate exists as a bridging ligand from pH 6 to 11 for both complexes. The IC₅₀ values of 1.96 and 1.57 μM [per Cu(II) ion] for 1 and 2 suggest that they are good models for the Cu₂Zn₂–SOD.     

Hydrogen peroxide- and nitric oxide-induced systemic antioxidant prime-like activity under NaCl-stress and stress-free conditions in citrus plants

We tested whether pre-treatments of roots with H₂O₂ (10 mM for 8 h) or sodium nitroprusside (SNP; 100 μM for 48 h), a donor of NO, could induce prime antioxidant defense responses in the leaves of citrus plants grown in the absence or presence of 150 mM NaCl for 16 d. Both root pre-treatments increased leaf superoxide dismutase (SOD), catalase (CAT), ascorbate peroxidase (APX) and glutathione reductase (GR) activities, and induced related-isoform(s) expression under non-NaCl-stress conditions. When followed by salinity, certain enzymatic activities also exhibited an up-regulation in response to H₂O₂ or SNP pre-exposure. An NaCl-stress-provoked decrease in the ascorbate redox state was partially prevented by both pre-treatments, whereas the glutathione redox state under normal and NaCl-stress conditions was increased by SNP. Real-time imaging of NO production was found in vascular tissues and epidermal cells. Furthermore, NaCl-induced inhibition in OH scavenging activity and promotion of OH-mediated DNA strand cleavage was partially prevented by SNP. Moreover, NaCl-dependent protein oxidation (carbonylation) was totally reversed by both pre-treatments as revealed by quantitative assay and protein blotting analysis. These results provide strong evidence that H₂O₂ and NO elicit long-lasting systemic primer-like antioxidant activity in citrus plants under physiological and NaCl-stress conditions.     

Synthesis and characterization of a crosslinked chitosan derivative with a complexing agent and its adsorption studies toward metal(II) ions

A new chitosan derivative has been synthesized by crosslinking a metal complexing agent, [6,6′-piperazine-1,4-diyldimethylenebis (4-methyl-2-formyl) phenol] (L), with chitosan (CTS). The resulting material (CCTSL) was characterized by elemental (CHN), spectral (FTIR and solid-state NMR), thermal (TGA and DTA), and structural (powder XRD and SEM) analyses. Adsorption experiments (pH dependency, kinetics, and equilibrium) of CCTSL toward various metal ions such as Mn(II), Fe(II), Co(II), Cu(II), Ni(II), Cd(II), and Pb(II) were carried out at 25 °C. The results showed that the adsorption was dependent on the pH of the solution, with a maximum capacity between pHs 6.5 and 8.5. The kinetics was evaluated by applying the pseudo-first-order and pseudo-second-order equation models and the equilibrium data were analyzed by Langmuir isotherm model. The maximum adsorption capacity was 1.21 mmol g⁻¹ for Cu(II) and the order of adsorption capacities for the metal(II) ions studied was found to be Cu(II) > Ni(II) > Cd(II)  Co(II)  Mn(II)  Fe(II)  Pb(II).     

Influence of environmental factors on reductive bioprecipitation of uranium by sulfate reducing bacteria

Microbial reduction of soluble uranyl [U (VI)] to insoluble uraninite by sulfate reducing bacteria (SRB) is a promising remediation strategy for uranium-contaminated groundwater. Effects of environmental factors, including pH and coexisting ions, on U (VI) bioreduction processes (UBP) remain unknown. Anaerobic batch experiments were performed to evaluate impact on UBP. Kinetic investigations with varied pH demonstrated that U (VI) was reduced mostly within 48 h. The bioprecipitation yields depended strongly on pH, increasing from 12.9% to 99.4% at pH 2.0 and 6.0, respectively. Sulfate concentration 4000 mg l⁻¹ did not affect UBP; however, sulfate concentration 5000 mg l⁻¹ significantly slowed UBP. Biogenic H₂S produced during sulfate reduction was not directly involved in UBP. At 20 mg l⁻¹ Zn or 10 mg l⁻¹ Cu, no UBP inhibition was observed and uraninite was detected in metal sulfide precipitate. However, 25 mg l⁻¹ Zn or 15 mg l⁻¹ Cu stopped UBP completely. Cu toxicity mechanism probably differed from Zn. The ability to reduce U (VI) was lost permanently with exposure to 15 mg l⁻¹ Cu, but not for Zn 25 mg l⁻¹. No uraninite could be detected before nitrate removal, suggesting nitrate strongly inhibited UBP, which may possibly be related to denitrification intermediates controlling the solution redox potential.     

Effects of heavy metals on seed germination and early seedling growth of <Emphasis Type="Italic">Arabidopsis thaliana</Emphasis>

Seed is a developmental stage that is highly protective against external stresses in the plant life cycle. In this study, we analyzed toxicity of essential (Cu²⁺ and Zn²⁺) and non-essential heavy metals (Hg²⁺, Pb²⁺ and Cd²⁺) on seed germination and seedling growth in the model species Arabidopsis. Our results show that seedling growth is more sensitive to heavy metals (Hg²⁺, Pb²⁺, Cu²⁺ and Zn²⁺) in comparison to seed germination, while Cd²⁺ is the exception that inhibited both of these processes at similar concentrations. To examine if toxicity of heavy metals is altered developmentally during germination, we incubated seeds with Hg²⁺ or Cd²⁺ only for a restricted period during germination. Hg²⁺ displayed relatively strong toxicity at period II (12–24 h after imbibition), while Cd²⁺ was more effective to inhibit germination at period I (0–12 h after imbibition) rather than at period II. The observed differences are likely to be due in part to selective uptake of different ions by the intact seed, because isolated embryos (without seed coat and endosperm) are more sensitive to both Hg²⁺ and Cd²⁺ at period I. We assessed interactive toxicity between heavy metals and non-toxic cations, and found that Ca²⁺ was able to partially restore the inhibition of seedling growth by Pb²⁺ and Zn²⁺.     

Extraction and characterization of hemicelluloses from flax shives by different methods

Hemicelluloses were extracted from flax shives using pressurized low-polarity water (PLPW), pressurized aqueous ethanol (PAE), microwave-assisted water (MW-Water) or aqueous ethanol (MW-EtOH), and precipitated with ethanol. Hemicelluloses still remaining in solution were further separated using ultrafiltration. All samples were characterized with chemical analysis, ion-moderated partition chromatography (IMP), size exclusion chromatography (SEC), and Fourier transform infrared (FT-IR) spectroscopy. PLPW, PAE, MW-Water and MW-EtOH extracted 90, 80, 18, and 40% of the total hemicelluloses, respectively. The molecular weight of the ethanol-precipitated hemicelluloses ranged from approximately 11,000 to 40,000 Da and the ethanol-soluble low-molecular weight hemicelluloses were about 1700 Da. High-molecular weight hemicellulose isolated from PAE extracts contained 23% lignin, while that from the PLPW extracts contained 5% lignin. Low-molecular weight hemicelluloses separated by ultrafiltration from PLPW and PAE extracts contained similar amounts of lignin (20%). However, the yield of low-molecular weight hemicelluloses from PLPW was higher (15%) compared to that from PAE (6%). The FT-IR results revealed the specific band maximum at 1220 cm⁻¹ and the bands between 1175 and 1000 cm⁻¹ which are typical of xylans.     

Decomposition of four macrophytes in wetland sediments: Organic matter and nutrient decay and associated benthic processes

Decomposition rates of Phragmites australis, Carex riparia, Nuphar luteum and Salvinia natans and benthic processes were measured from December 2003 to December 2004 in a shallow wetland (Paludi di Ostiglia, Northern Italy) by means of litter bags and intact cores incubations. Decay rate was highest for N. luteum (k = 0.0152 d⁻¹), intermediate for S. natans (k = 0.0041 d⁻¹) and similar for P. australis (k = 0.0027 d⁻¹) and C. riparia (k = 0.0028 d⁻¹).Benthic metabolism followed a seasonal pattern with summer peaks of O₂ demand and TCO₂, CH₄ and NH₄⁺ efflux whilst soluble reactive phosphorus (SRP) fluxes were negligible also under hypoxic conditions, indicating that P was mainly retained by sediment. The initial C:P ratio was similar in N. luteum and S. natans (170) and significantly lower than that of P. australis and C. riparia (360). During the detritus decay P was progressively lost by N. luteum and S. natans tissues, whereas, after an initial leaching, it was probably re-used during the microbial decomposition of the more refractory P. australis and C. riparia detritus. Nuphar luteum, P. australis and S. natans had comparable initial C:N mass ratio (15), significantly lower than that of C. riparia (26). The C:N ratio was rather constant for N. luteum (12.9 ± 1.5) and S. natans (14.6 ± 0.9), decreased slightly to below 20 for C. riparia and increased up to 30 for P. australis. Overall, differences among species were likely due to the recalcitrance of decomposing detritus, whilst process rates were controlled by limitation of microbial processes by nutrients and electron acceptor availability.     

The control of transmembrane helix transverse position in membranes by hydrophilic residues

The ability of hydrophilic residues to shift the transverse position of transmembrane (TM) helices within bilayers was studied in model membrane vesicles. Transverse shifts were detected by fluorescence measurements of the membrane depth of a Trp residue at the center of a hydrophobic sequence. They were also estimated from the effective length of the TM-spanning sequence, derived from the stability of the TM configuration under conditions of negative hydrophobic mismatch. Hydrophilic residues (at the fifth position in a 21-residue hydrophobic sequence composed of alternating Leu and Ala residues and flanked on both ends by two Lys) induced transverse shifts that moved the hydrophilic residue closer to the membrane surface. At pH 7, the dependence of the extent of shift upon the identity of the hydrophilic residue increased in the order: L < GYT < RH < S < P < K < EQ < N < D. By varying pH, shifts with ionizable residues fully charged or uncharged were measured, and the extent of shift increased in the order: L < GYH^oT < E^oR < S < P < K⁺< QD^oH⁺ < NE^– < D^–. The dependence of transverse shifts upon hydrophilic residue identity was consistent with the hypothesis that shift magnitude is largely controlled by the combination of side chain hydrophilicity, ionization state, and ability to position polar groups near the bilayer surface (snorkeling). Additional experiments showed that shift was also modulated by the position of the hydrophilic residue in the sequence and the hydrophobicity of the sequence moved out of the bilayer core upon shifting. Combined, these studies show that the insertion boundaries of TM helices are very sensitive to sequence, and can be altered even by weakly hydrophilic residues. Thus, many TM helices may have the capacity to exist in more than one transverse position. Knowledge of the magnitudes of transverse shifts induced by different hydrophilic residues should be useful for design of mutagenesis studies measuring the effect of transverse TM helix position upon function.     

Binding of mercuric and other heavy metal ions by microbial growth media

Ion-specific electrodes were used to study the binding of Hg²⁺, Pb²⁺, Cu²⁺, and Cd²⁺ ions to widely used bacterial growth media (Nutrient broth, trypticase soy broth, the medium of Foot and Taylor [6] and of Nelsonet al.[12]) and to media components [yeast extract, peptone, tryptone, proteose peptone, and casamino acids (acid hydrolyzed casein)]. Volatilization of Hg²⁺ from aqueous solutions could be prevented by any of the growth media or their components. All media bound large amounts of Hg²⁺, Pb²⁺, and Cu²⁺, but much less Cd²⁺. Of the media components, casamino acids showed the most binding activity for all metal ions; the relative affinity of other media components to different ions varied with the cation studied. In general, the Irving-Williams [8] series for cation affinity to organic ligands was followed: Hg²⁺>Pa²⁺ Cu²⁺ Cd²⁺.After adding 20 ppm of Hg²⁺, Pb²⁺, or Cu²⁺ (concentrations inhibitory to the growth of most microorganisms) to the growth media, 80 ppb or less remained as free cations in the solution. This might suggest that such ions enter bacterial cells as organic complexes, or that bacterial cells can compete successfully with growth media for the bound ions.