Response surface analysis for enzymatic decolorization of Congo red by manganese peroxidase

The enzymatic decolorization process of manganese peroxidase (MnP) is a complex system, which is greatly affected by the concentrations of H₂O₂, Mn²⁺, dye and enzyme. This work aimed to study these factors and investigate the combined interactions between them by applying response surface methodology (RSM) for decolorization of Congo red with MnP from Schizophyllum sp. F17, meanwhile conventional one-factor-at-a-time analysis was carried out. Through the one-factor-at-a-time analysis the optimized H₂O₂, Mn²⁺, Congo red and MnP extract was 0.2 mM, 0.5 mM, 50 mg/l and 0.8 ml, respectively, and the maximum decolorization attained under such conditions was 24.2%. Response surface analysis was conducted through Box–Behnken design and a second-order polynomial model (R² = 0.8565) was generated to describe the combined effect and the interactions quantificationally. ANOVA analysis indicated that the interactions between H₂O₂ and MnP, between dye and MnP were significant; the optimum condition through RSM was found to be 0.35 mM H₂O₂, 0.5 mM Mn²⁺, 75 mg/l Congo red and 1.4 ml MnP extract, for maximum decolorization of 30.8%.     

Decolorization and biodegradation of triphenylmethane dye,brilliant green,by Aspergillus sp. isolated from Ladakh,India

Brilliant green, used extensively to color silk and wool in the commercial textile industry is a hazardous recalcitrant. Aspergillus sp. strain CB-TKL-1 isolated from a water sample from Tsumoriri Lake, Karzok, Ladakh, India, was found to completely decolorize this dye within 72 h when cultured under aerobic conditions at 25 °C. The extent of decolorization was monitored by the decrease in absorbance maxima of the dye by UV–visible spectroscopy. The decolorization was optimum at pH 5 and 35 °C when agitated at 200 rpm. Addition of glucose (2%) as a carbon source and sodium nitrate (0.2%) as a nitrogen source enhanced the decolorization ability of the culture. The culture exhibited maximum extent of decolorization of brilliant green with a C:N ratio of 2.5 after 72 h. Thirteen N-demethylated decolorized products of brilliant green were identified based on UV–visible spectroscopy, Fourier Transform Infrared (FT-IR) spectroscopy and liquid chromatography–electrospray ionization mass spectrometry (LC–ESI-MS) analysis at the end of 72 h before mineralization. The difference of the relative absorption peaks in the decolorized sample indicated a linear release of N-demethylated compounds, indicating a stepwise N-demethylation in the decolorization process.     

Detoxification of Indigo carmine using a combined treatment via a novel trimeric thermostable laccase and microbial consortium

For the first time, the investigation of Indigo carmine decolorization was done using an atypical Scytalidium thermophilum laccase. Crude and purified laccases required high temperatures and slight acidic pH to achieve maximum Indigo decolorization. Kinetic parameters (K_m and k_cat) of the homotrimeric laccase toward Indigo carmine were determined and laccase efficacy toward repeated dye decolorization process was studied. For the first time, 5 g l⁻¹ as initial Indigo carmine concentration were efficiently transformed up to 50% within 6 h of incubation using 0.1 U ml⁻¹ of laccase and without presence of any mediators. In this study, we showed that the atypical laccase transformed the indigoid dye structure, confirmed by the color changing from blue to red. This intermediate (red) was a subject to an efficient microbial consortium treatment monitored by measuring the decrease in optical density and the total organic carbon removal efficiencies. Toxicological studies via micro-toxicity test showed that the released enzymatic and adapted consortium degradation products were both non-toxic while the initial product was toxic.     

Degradation of synthetic reactive azo dyes and treatment of textile wastewater by a fungi consortium reactor

In this paper, two microbial cultures with high decolorization efficiencies of reactive dyes were obtained and were proved to be dominant with fungi consortium in which 21 fungal strains were isolated and 8 of them showed significant decolorization effect to reactive red M-3BE. A 4.5 l continuous biofilm reactor was established using the mixed cultures to investigate the decolorization performance and the system stability under the conditions of simulated and real textile wastewater as influents. The optimal nutrient feed to this bioreactor was 0.5 g l⁻¹ glucose and 0.1 g l⁻¹ (NH₄)₂SO₄ when 30 mg l⁻¹ reactive black 5 was used as initial dye concentrations. Dye mineralization rates of 50–75% and color removal efficiencies of 70–80% were obtained at 12 h hydraulic retention time (HRT) in this case. Higher glucose concentrations in the influents could significantly improve color removal, but was not helpful for dye mineralization. Besides reactive black 5, the bioreactor could effectively decolorize reactive red M-3BE, acid red 249 and real textile wastewater with efficiency of 65%, 94% and 89%, respectively. In addition, the microbial community on the biofilm was monitored in the whole running process. The results indicated fungi as a dominant population in the decolorization system with the ratio of fungi to bacteria 6.8:1 to 51.8:1 under all the tested influent conditions. Analysis of molecular biological detection indicated that yeasts of genus Candida occupied 70% in the fungal clone library based on 26S rRNA gene sequences.     

Enzymatic decolorization of sulfonphthalein dyes

The white rot fungus (WRF) Pleurotus ostreatus produced manganese peroxidase (MnP) and manganese-independent peroxidase (MIP) activities during solid state fermentation of wheat straw, a natural lignocellulosic substrate. Most of the sulfonphthalein (SP) dyes were decolorized by MnP at pH 4.0. The higher K_m for meta-cresol purple (40 μM) and lower K_m for ortho-cresol red (26 μM) for MnP activities explained the preference for the position of methyl group at ortho than at meta on chromophore. Bromophenol blue decolorizing activity was higher at pH 3.5 and decreased as the concentration of Mn^II was increased. SP-decolorizing activity was associated not only with MnP but also with MIP. Additional bromine group along with the methyl group on SP chromophores decreases the rate of decolorization. Bromination of sulfonphthalein chromophore makes them the poorer substrate for MnP. This is evident from the higher K_m for bromocresol green (117 μM) when compared to bromocresol purple (36 μM) and bromophenol blue (78 μM). The order of preference for the SP dyes as substrate for the MnP-catalyzed decolorizing activity is phenol red > ortho-cresol red > meta-cresol purple > bromophenol red > bromocresol purple > bromophenol blue > bromocresol green and the order of preference for the SP dyes as substrate for the MIP-catalyzed decolorizing activity is bromocresol green > bromophenol blue > bromocresol purple > bromophenol red > meta-cresol purple > ortho-cresol red > phenol red. Inhibition of PR decolorizing activity by NaN₃ provided the evidence of decolorizing activity as an oxidative process.     

Rapid decolorization of azo dyes by crude manganese peroxidase from Schizophyllum sp. F17 in solid-state fermentation

The production of ligninolytic enzymes by the fungus Schizophyllum sp. F17 using a cost-effective medium comprised of agro-industrial residues in solid-state fermentation (SSF) was optimized. The maximum activities of the enzymes manganese peroxidase (MnP), laccase (Lac), and lignin peroxidases (LiP) were 1,200, 586, and 109 U/L, respectively, on day 5 of SSF. In vitro decolorization of three structurally different azo dyes by the extracellular enzymes was monitored to determine its decolorization capability. The results indicated that crude MnP, but not LiP and Lac, played a crucial role in the decolorization of azo dyes. After optimization of the dye decolorization system with crude MnP, the decolorization rates of Orange IV and Orange G, at an initial dye concentration of 50 mg/L, were enhanced to 76 and 57%, respectively, after 20 min of reaction at pH 4 and 35°C. However, only 8% decolorization of Congo red was observed. This enzymatic reaction system revealed a rapid decolorization of azo dyes with a low MnP activity of 24 U/L. Thus, this study could be the basis for the production and application of MnP on a larger scale using a low-cost substrate.     

Use of Geotrichum candidum for olive mill wastewater treatment in submerged and static culture

The production of lignin peroxidase (LiP), manganese peroxidase (MnP) and lipases by Geotrichum candidum were performed in order to control the decolourisation and biodegradation of olive mill wastewater (OMW). Optimisation of different factors showed that dilution, carbon and ammonium concentrations significantly affected decolourisation and activities of ligniolytic peroxidases (LiP and MnP) on OMW. Moreover, addition of olive oil and agitation improved the lipase production. Batch and continuous OMW treatments in settler or bubble column bioreactors showed high COD and colour removal efficiencies of 60% and 50%, respectively. Lipolytic activity was greater in the batch bubble column whereas, LiP and MnP productions were improved in the settler. The performance of the continuous processes decreased with the decrease of hydraulic retention time (HRT). It has been shown that decolourisation and biodegradation decreased with an average of 40% and 45%, respectively, by decreasing the HRT from 4 d to 1.7 d.     

Decolorization of textile azo dyes by aerobic bacterial consortium

The decolorization potential of two bacterial consortia developed from a textile wastewater treatment plant showed that among the two mixed bacterial culture SKB-II was the most efficient in decolorizing individual as well as mixture of dyes. At 1.3 g L^?1 starch supplementation in the basal medium by the end of 120 h decolorization of 80–96% of four out of the six individual azo dyes Congo red, Bordeaux, Ranocid Fast Blue and Blue BCC (10 mg L^?1) was noted. The culture exhibited good potential ability in decolorizing 50–60% of all the dyes (Congo red, Bordeaux, Ranocid Fast Blue and Blue BCC) when present as a mixture at 10 mg L^?1. The consortium SKB-II consisted of five different bacterial types identified by 16S rDNA sequence alignment as Bacillus vallismortis, Bacillus pumilus, Bacillus cereus, Bacillus subtilis and Bacillus megaterium which were further tested to decolorize dyes. The efficient ability of this developed consortium SKB-II to decolorize individual dyes and textile effluent using packed bed reactors is being carried out.     

Bacterial decolorization and degradation of the reactive dye Reactive Red 180 by Citrobacter sp. CK3

A bacterial strain, CK3, with remarkable ability to decolorize the reactive textile dye Reactive Red 180, was isolated from the activated sludge collected from a textile mill. Phenotypic characterization and phylogenetic analysis of the 16S rDNA sequence indicated that the bacterial strain belonged to the genus Citrobacter. Bacterial isolate CK3 showed a strong ability to decolorize various reactive textile dyes, including both azo and anthraquinone dyes. Anaerobic conditions with 4 g l^?1 glucose, pH = 7.0 and 32 °C were considered to be the optimum decolorizing conditions. Citrobacter sp. CK3 grew well in a high concentration of dye (200 mg l^?1), resulting in approximately 95% decolorization extent in 36 h, and could tolerate up to 1000 mg l^?1 of dye. UV–vis analyses and colorless bacterial cells suggested that Citrobacter sp. CK3 exhibited decolorizing activity through biodegradation, rather than inactive surface adsorption. It is the first time that a bacterial strain of Citrobacter sp. has been reported with decolorizing ability against both azo and anthraquinone dyes. High decolorization extent and facile conditions show the potential for this bacterial strain to be used in the biological treatment of dyeing mill effluents.     

Liquid state fermentation of apple pomace sludge for the production of ligninolytic enzymes and liberation of polyphenolic compounds

Ligninolytic enzyme production and polyphenolic compound extraction by liquid-state culture of Phanerochaete chrysosporium ATCC 24275 was investigated by employing apple pomace sludge and synthetic medium. Different physico-chemical and biological parameters namely viscosity, zeta potential and particle size, viability and enzyme production were investigated. The ligninolytic enzyme production was higher in apple pomace sludge (45 U/l of laccase, 220 U/l of MnP and 6.5 U/l of LiP) than in synthetic medium (17 U/l of laccase, 37 U/l of MnP and 6 U/l). These maximal activities were found during the stationary and decline phase. It was also found that enzyme production was strongly correlated with P. chrysoporium viability in both synthetic medium and apple pomace sludge. Moreover, physico-chemical parameters, such as particle size, zeta potential and viscosity were strongly correlated to the viability of P. chrysosporium and to the ligninolytic enzyme production. An increase in polyphenol content extracted by acetone (383–720 mg GAE/l) was observed during fermentation of apple pomace and it was found that the polyphenol content extracted by ethanol increased ～1.5 fold until 67 h of fermentation and later it decreased. It was found that antioxidant activity increased to 35% and eventually decreased based on the change in the polyphenol content.     

Decolorization of practical textile industry effluents by white rot fungus Coriolus versicolor IBL-04

Textile industry discharges a vast amount of unused synthetic dyes in effluents. The discharge of these effluents into rivers and lakes leads to a reduction in sunlight penetration in natural water bodies, which, in turn, decreases both photosynthetic activity and dissolved oxygen concentration rendering it toxic to living beings. This paper describes the decolorization potential of a local white rot fungus, Coriolus versicolor IBL-04 for practical industrial effluents collected from five different textile industries of Faisalabad, Pakistan. Screening of C. versicolor IBL-04 on five effluents showed best decolorization results (36.3%) for Arzoo Textile Industry (ART) effluent in 6 days followed by Crescent Textile Industry (CRT), Itmad Textile Industry (ITT), Megna Textile Industry (MGT) and Ayesha Textile Industry (AST) effluents. Optimization of different process parameters for ART effluent decolorization by C. versicolor IBL-04 showed that manganese peroxidase (MnP) (486 U/mL) was the lignolytic enzyme present in the culture filtrates with undetectable lignin peroxidase (LiP) and laccase. The MnP synthesis and effluent decolorization could be enhanced to 725 U/mL and 84.4%, respectively, with a significant time reduction to 3 days by optimizing pH and temperature and using 1% starch as a supplementary carbon source.     

Decolorization of azo dye by immobilized Pseudomonas luteola entrapped in alginate–silicate sol–gel beads

Pseudomonas luteola was immobilized by entrapment in alginate–silicate sol–gel beads for decolorization of the azo dye, Reactive Red 22. The influences of biomass loading and operating conditions on specific decolorization rate and dye removal efficiency were studied in details. The immobilized cells were found to be less sensitive to changes in agitation rates (dissolved oxygen levels) and pH values. Michaelis–Menten kinetics could be used to describe the decolorization kinetics with the kinetic parameters being 36.5 mg g⁻¹ h⁻¹, 300.1 mg l⁻¹ and 18.2 mg g⁻¹ h⁻¹, 449.8 mg l⁻¹ for free and immobilized cells, respectively. After five repeated batch cycles, the decolorization rate of the free cells decreased by nearly 54%, while immobilized cells still retained 82% of their original activity. The immobilized cells exhibited better thermal stability during storage and reaction when compared with free cells. From SEM observation, a dense silicate gel layer was found to surround the macroporous alginate–silicate core, which resulted in much improved mechanical stability over that of alginate beads when tested under shaking conditions. Alginate–silicate matrices appeared to be the best matrix for immobilization of P. luteola in decolorization of Reactive Red 22 when compared with previous results using synthetic or natural polymer matrices.     

Treatment of dye-rich wastewater by an immobilized thermophilic cyanobacterial strain: Phormidium sp.

The removal of Remazol Blue and Reactive Black B by the immobilized thermophilic cyanobacterial strain Phormidium sp. was investigated under thermophilic conditions in a batch system, in order to determine the optimal conditions required for the highest dye removal. In the experiments, performed at pH 8.5, with different initial dye concentrations between 9.1 mg l⁻¹ and 82.1 mg l⁻¹ and at 45 °C, calcium alginate immobilized Phormidium sp. showed high dye decolorization, with maximum uptake yields ranging from 50% to 88% at all dye concentrations tested. When the effects of high dye concentrations on dye removal were investigated, the highest uptake yield in the beads was 50.3% for 82.1 mg l⁻¹ Remazol Blue and 60.0% for 79.5 mg l⁻¹ Reactive Black B. The highest color removal was detected at 45 °C and 50 °C incubation temperatures for all dye concentrations. As the temperature decreased, the removal yield of immobilized Phormidium sp. also decreased. At about 75 mg l⁻¹ initial dye concentrations, the highest specific dye uptake measured was 41.29–41.17 mg g⁻¹ for Remazol Blue and 47.69–43.82 mg g⁻¹ for Reactive Black B at 45 °C and 50 °C incubation temperatures, respectively, after 8 days incubation.     

Decolorization of synthetic and real textile wastewater by the use of white-rot fungi

Batch and continuous reactors inoculated with white-rot fungi were operated in order to study decolorization of textile dyes. Synthetic wastewater containing either Reactive Blue 4 (a blue anthraquinone dye) or Reactive Red 2 (a red azo dye) was used during the first part of the study while real wastewater from a textile industry in Tanzania was used in the later part. Trametes versicolor was shown to decolorize both Reactive Blue 4 and Reactive Red 2 if glucose was added as a carbon source. Reactive Blue 4 was also decolorized when the fungus was allowed to grow on birch wood discs in a continuous biological rotating contactor reactor. The absorbance at 595 nm, the wavelength at which the dye absorbs at a maximum, decreased by 70% during treatment. The initial dye concentration in the medium was 200 mg/l and the hydraulic retention time in the reactor 3 days. No glucose was added in this experiment. Changes of the absorbance in the UV range indicated that the aromatic structures of the dyes were altered. Real textile wastewater was decolorized by Pleurotus flabellatus growing on luffa sponge packed in a continuous reactor. The reactor was operated at a hydraulic retention time of 25 h. The absorbance at 584 nm, the wavelength at which the wastewater absorbed the most, decreased from 0.3 in the inlet to approximately 0.1 in the effluent from the reactor.     

Enhanced decolorization and biodegradation of textile azo dye Scarlet R by using developed microbial consortium-GR

A developed consortium-GR, consisting of Proteus vulgaris NCIM-2027 (PV) and Micrococcus glutamicus NCIM-2168 (MG), completely decolorized an azo dye Scarlet R under static anoxic condition with an average decolorization rate of 16,666 μg h^?1; which is much faster than that of the pure cultures (PV, 3571 μg h^?1; MG, 2500 μg h^?1). Consortium-GR gave best decolorization performance with nearly complete mineralization of Scarlet R (over 90% TOC and COD reduction) within 3 h, much shorter relative to the individual strains. Induction in the riboflavin reductase and NADH–DCIP reductase was observed in the consortium, suggesting the involvement of these enzymes during the fast decolorization process. The FTIR and GC–MS analysis showed that 1,4-benzenediamine was formed during decolorization/degradation of Scarlet R by consortium-GR. Phytotoxicity studies revealed no toxicity of the biodegraded products of Scarlet R by consortium-GR. In addition, consortium-GR applied for mixture of industrial dyes showed 88% decolorization under static condition with significant reduction in TOC (62%) and COD (68%) within 72 h, suggesting potential application of this microbial consortium in bioremediation of dye-containing wastewater.     

Textile dye degrading laccase from Pseudomonas desmolyticum NCIM 2112

A laccase requiring optimum temperature 60 °C, pH 4.0 for the activity and having apparent molecular weight 43,000 Da was purified from Pseudomonas desmolyticum NCIM 2112 by three steps, including heating, anion exchange, and molecular sieve chromatography. The purification fold and yield of laccase obtained through Biogel P100 were 45.75 and 19%, respectively. Staining of native gel with L-dopa showed dark brown color band indicating the presence of laccase. In relation to hydroquinone, the substrate specificity of laccase was in the following order: DAB > o-tolidine > ABTS > L-dopa. The absence of monophenolase activity in eluted fractions conformed that the purified protein is laccase. This laccase showed substrate dependent optimum pH character. Effect of inhibitor and metal ion on enzyme activity was analyzed. UV–vis analysis showed the decolorization of Direct Blue-6, Green HE4B and Red HE7B in the presence of laccase. The FTIR spectral comparison between the control dye sample and the metabolites extracted after decolorization by purified laccase have confirmed degradation of these dyes. This study contributes for the structural requirement of a dye to be degradable by P. desmolyticum laccase and is important in order to optimize potential bioremediation systems for industrial textile process water treatment.     

Treatment of dye (Remazol Blue) and heavy metals using yeast cells with the purpose of managing polluted textile wastewaters

The bioaccumulation of chromium(VI), nickel(II), copper(II), and reactive dye by the yeast Rhodotorula mucilaginosa has been investigated in media containing molasses as a carbon and energy source. Optimal pH values for the yeast cells to remove the pollutants were pH 4 for copper(II) and dye, pH 6 for chromium(VI) and dye, and pH 5 for nickel(II) and dye in media containing 50 mg l^?1 heavy metal and 50 mg l^?1 Remazol Blue. The maximum dye bioaccumulation was observed within 4–6 days and uptake yields varied from 93% to 97%. The highest copper(II) removal yields measured were 30.6% for 45.4 mg l^?1 and 32.4% for 95.9 mg l^?1 initial copper(II) concentrations. The nickel(II) removal yield was 45.5% for 22.3 mg l^?1, 38.0% for 34.7 mg l^?1, and 30.3% for 62.2 mg l^?1. Higher chromium(VI) removal yields were obtained, such as 94.5% for 49.2 mg l^?1 and 87.7% for 129.2 mg l^?1 initial chromium(VI) concentration. The maximum dye and heavy metal bioaccumulation yield was investigated in media with a constant dye (approximately 50 mg l^?1) and increasing heavy metal concentration. In the medium with 48.9–98.8 mg l^?1 copper(II) and constant dye concentration, the maximum copper(II) bioaccumulation was 27.7% and 27.9% whereas the maximum dye bioaccumulation was 96.1% and 95.3%. The maximum chromium(VI) bioaccumulation in the medium with dye was 95.2% and 80.3% at 48.2 and 102.2 mg l^?1 chromium(VI) concentrations. In these media dye bioaccumulation was 76.1% and 35.1%, respectively. The highest nickel(II) removal was 6.1%, 20.3% and 16.0% in the medium with 23.8 mg l^?1 nickel(II) + 37.8 mg l^?1 dye, 38.1 mg l^?1 nickel(II) + 33.4 mg l^?1 dye and 59.0 mg l^?1 nickel(II) + 39.2 mg l^?1 dye, respectively. The maximum dye bioaccumulation yield in the media with nickel(II) was 94.1%, 78.0% and 58.7%, respectively.     

Efficient decolorization of an anthraquinone dye by recombinant dye-decolorizing peroxidase (rDyP) immobilized in silica-based mesocellular foam

A recombinant dye-decolorizing peroxidase (rDyP) produced from Aspergillus oryzae was immobilized in synthesized silica-based mesocellular foam (MCF: average pore size 25 nm) and used for decolorization of the anthraquinone dye, Remazol Brilliant Blue R (RBBR). The adsorption yields of rDyP immobilized in MCF increased as the pH decreased from 6 to 3. However, the activity yields of the immobilized rDyP decreased with decreasing pH. The overall efficiency, defined as adsorption yield × activity yield, reached its maximum of 83% at pH 5. In repeated dye-decolorization tests, 20 batches of RBBR could be decolorized by the MCF-immobilized rDyP. MCF showed significantly better performance for rDyP immobilization in term of retaining enzyme activity and dye-decolorization ability compared to previous studies using other mesoporous materials.     

Decolorization of 1-amino-4-bromoanthraquinone-2-sulfonic acid by a newly isolated strain of Sphingomonas herbicidovorans

A novel isolate of Sphingomonas herbicidovorans could decolorize 1-amino-4-bromoanthraquinone-2-sulfonic acid (bromoamine acid, BAA), an intermediate of anthraquinone dyes, and grow with it as the sole source of carbon. The strain was identified by 16S rRNA gene sequencing and physiological-biochemical test. The optimal condition for both decolorization and cell growth was found at temperature of 30 °C and pH 7.0, respectively. Furthermore, the decolorization efficiency could be enhanced with higher shaking speed. The percentage of BAA decolorization could be over 98% within 24 h even for the initial concentration greater than 1000 mg l^?1. The decolorization kinetics could be reasonably described by the Monod equation. Additional carbon sources such as glucose could enhance the decolorization rate. During the decolorization process, the molecular of BAA cleaved, releasing phthalic acid and an end product which might be benzene derivative substituted by amino, bromo, hydroxyl and sulfonate groups according to the infrared spectral analysis.     

The involvement of acetic acid in programmed cell death for the elimination of Bacillus sp. used in bioremediation

A bacterium capable of tolerating some textile effluent conditions such as salinity and high temperature was used to decolorize methyl red (MR). Bacillus sp. isolated from Dead Sea salt was identified by 16S rRNA phylogenetic identification as Bacillus ST (accession number: HQ013327). The bacterium showed 98% color removal under microaerophilic conditions in 24 h at 30 °C and 78% at 80 °C in the presence of mannitol and NaCl. After decolorization an induced programmed cell death (PCD) was proposed to eliminate all living Bacillus ST cells. Acetic acid, which was linked to programmed cell death in yeast, was used in this study to examine its ability to induce PCD in bacteria as well. The acetic acid concentration used was enough to shift the culture pH from alkalinity to neutral. The formation of cytosolic caspase-3 suggested that the programmed cell death occurs through an extrinsic pathway by which mitochondria are by passed and caspases are directly activated. Comet assay which proved death upon the addition of 80 mM acetic acid in 120 min as compared to gamma radiation killed cells. Transmission electron microscopy (TEM) showed cell shrinking, chromatin condensation and membrane blebbing which are all signs of PCD. The mode by which this bacterium follows in programmed cell death is very similar to those in mammalian and yeast cells. The process is proposed to be safe, efficient and cheap for getting rid of cells after bioremediation of colored effluent.