EDTA-assisted phytoextraction of heavy metals by turfgrass from municipal solid waste compost using permeable barriers and associated potential leaching risk

A column experiment with horizontal permeable barriers was conducted to investigate phytoextraction of heavy metals by Lolium perenne L. from municipal solid waste compost following EDTA application, as well as to study the effects of L. perenne and permeable barriers on preventing metal from leaching. In columns with barriers, EDTA addition yielded maximum concentrations of Cu, Zn and Pb of 155, 541 and 33.5 mg kg⁻¹ in shoot, respectively. This led to 4.2, 2.1 and 7.4 times higher concentrations of Cu, Zn and Pb compared to treatment with no chelating agent, respectively. In treatments with 10 mmol kg⁻¹ EDTA, the barriers reduced leaching of Cu, Zn and Pb by approximately three times, respectively, resulting in leaching of total initial Cu, Zn and Pb by 27.3%, 25.2% and 28.8%, respectively, after four times’ irrigation. These results indicate that L. perenne and permeable barriers are effective to reduce leaching of heavy metals and minimize the risk of contaminating groundwater in EDTA-enhanced phytoremediation. Thus these findings highlight that turfgrass and permeable barriers can effectively prevent metal leaching.     

Simultaneous oxidation of ammonium and p-cresol linked to nitrite reduction by denitrifying sludge

The metabolic capability of denitrifying sludge to oxidize ammonium and p-cresol was evaluated in batch cultures. Ammonium oxidation was studied in presence of nitrite and/or p-cresol by 55 h. At 50 mg/L NH₄⁺-N and 76 mg/L NO₂⁻-N, the substrates were consumed at 100% and 95%, respectively, being N₂ the product. At 50 mg/L NH₄⁺-N and 133 mg/L NO₂⁻-N, the consumption efficiencies decreased to 96% and 70%, respectively. The increase in nitrite concentration affected the ammonium oxidation rate. Nonetheless, the N₂ production rate did not change. In organotrophic denitrification, the p-cresol oxidation rate was slower than ammonium oxidation. In litho-organotrophic cultures, the p-cresol and ammonium oxidation rates were affected at 133 mg/L NO₂⁻-N. Nonetheless, at 76 mg/L NO₂⁻-N the denitrifying sludge oxidized ammonium and p-cresol, but at different rate. Finally, this is the first work reporting the simultaneous oxidation of ammonium and p-cresol with the production of N₂ from denitrifying sludge.     

Induced production of chitinase to enhance entomotoxicity of Bacillus thuringiensis employing starch industry wastewater as a substrate

Induced production of chitinase during bioconversion of starch industry wastewater (SIW) to Bacillus thuringiensis var. kurstaki HD-1 (Btk) based biopesticides was studied in shake flask as well as in computer-controlled fermentors. SIW was fortified with different concentrations (0%; 0.05%; 0.1%; 0.2%; 0.3% w/v) of colloidal chitin and its consequences were ascertained in terms of Btk growth (total cell count and viable spore count), chitinase, protease and amylase activities and entomotoxicity. At optimum concentration of 0.2% w/v colloidal chitin, the entomotoxicity of fermented broth and suspended pellet was enhanced from 12.4 × 10⁹ (without chitin) to 14.4 × 10⁹ SBU/L and from 18.2 × 10⁹ (without chitin) to 25.1 × 10⁹ SBU/L, respectively. Further, experiments were conducted for Btk growth in a computer-controlled 15 L bioreactor using SIW as a raw material with (0.2% w/v chitin, to induce chitinase) and without fortification of colloidal chitin. It was found that the total cell count, spore count, delta-endotoxin concentration (alkaline solubilised insecticidal crystal proteins), amylase and protease activities were reduced whereas the entomotoxicity and chitinase activity was increased with chitin fortification. The chitinase activity attained a maximum value at 24 h (15 mU/ml) and entomotoxicity of suspended pellet reached highest (26.7 × 10⁹ SBU/L) at 36 h of fermentation with chitin supplementation of SIW. In control (without chitin), the highest value of entomotoxicity of suspended pellet (20.5 × 10⁹ SBU/L) reached at 48 h of fermentation. A quantitative synergistic action of delta-endotoxin concentration, spore concentration and chitinase activity on the entomotoxicity against spruce budworm larvae was observed.     

Ecophysiological responses of the mangrove Avicennia marina to trace metal contamination

Growth responses of Avicennia marina seedlings to contamination by different concentrations of two essential (Cu, Zn) and two non-essential (Pb, Hg) trace metals were studied under glasshouse conditions. We tested the hypothesis that soil retention and root ultrafiltration would exclude most of the trace metals, and that those that are absorbed and translocated to the shoots would interfere with plant performance and be excreted via leaf salt glands. One-month-old seedlings were subjected to Cu, Zn, Pb and Hg at concentrations of 0, 40, 80, 120 and 160 μg g⁻¹ sediment for 12 months in a randomized complete block design (n = 6). Photosynthesis was measured at the end of 12 months of trace metal exposure with a portable gas exchange system and chlorophyll fluorescence with a pulse-modulated fluorometer. After morphometric measurements, plants were harvested and analyzed for Cu, Zn, Pb and Hg by atomic absorption spectroscopy. Total dry biomass decreased with increasing trace metal concentration for all metals. In the 160 μg g⁻¹ Cu, Zn, Hg and Pb treatments, total biomass was significantly lower than the control value by 43%, 37%, 42% and 40%, respectively. Decreases in plant height and number of leaves followed trends similar to those for total biomass and ranged from 37% to 60%, compared to the controls. Decreases in chlorophyll content in the trace metal treatments ranged from 50% to 58% compared to the control. Carbon dioxide exchange, quantum yield of photosystem II (PSII), electron transport rate (ETR) through PSII and photosynthetic efficiency of PSII (F_v/F_m) were highest in the control treatment and decreased with increasing trace metal concentrations. Decreases in CO₂ exchange in the 160 μg g⁻¹ treatments for all trace metals ranged from 50% to 60%. Concentrations of all trace metals in plant organs increased with increasing metal concentrations and were higher in roots than in shoots, with concentrations of Cu and Zn being considerably higher than those of Hg and Pb. Qualitative elemental analyses and X-ray mapping of crystalline deposits over the glands at the leaf surfaces indicated that Cu and Zn were excreted from the salt glands, while Hg and Pb were absent, at least being below the limits of detection. These results demonstrate that growth processes are sensitive to trace metals and therefore can be considered as a cost of metal tolerance, but salt glands of this mangrove species do contribute eliminating at least part of physiologically essential trace metals if taken up in excess.     

Accumulation of Indium and other heavy metals by Eleocharis acicularis: an option for phytoremediation and phytomining

Eleocharis acicularis was exposed to different concentrations of In, Ag, Pb, Cu, Cd, and Zn in the laboratory to assess its capability in accumulating these metals. After 15 days, 477 mg/kg dry wt. of In was accumulated by the roots; concentrations of Ag, Pb, Cu, Cd, and Zn in the shoots were 326, 1120, 575, 195, and 213 mg/kg dry wt., respectively. The results indicate that E. acicularis has the ability to accumulate these metals from water, making it a good candidate species for phytoremediation and phytomining.     

Hypotensive mechanism of the extracts and artemetin isolated from Achillea millefolium L. (Asteraceae) in rats

Traditional uses of Achillea millefolium L. (Asteraceae) include the treatment of cardiovascular diseases. In the present study, we used anesthetized rats to assess the hypotensive effect of a hydroethanolic extract (HEAM), and its dichloromethane (DCM), ethyl acetate (EA), butanolic (BT), and dichloromethane-2 (DCM-2) fractions, besides the flavonoid artemetin, isolated from A. millefolium. The oral administration of HEAM (100-300 mg/kg), DCM (20 mg/kg), DCM-2 (10-30 mg/kg), but not EA (10 mg/kg) and BT (50 mg/kg) fractions significantly reduced the mean arterial pressure (MAP) of normotensive rats. The phytochemical analysis by NMR ¹H of DCM and DCM-2 fractions revealed high amounts of artemetin, that was isolated and administered by either oral (1.5 mg/kg) or intravenous (0.15-1.5 mg/kg) routes in rats. This flavonoid was able to dose-dependently reduce the MAP, up to 11.47 ± 1.5 mm Hg (1.5 mg/kg, i.v.). To investigate if artemetin-induced hypotension was related to angiotensin-converting enzyme inhibition, we evaluated the influence of this flavonoid on the vascular effects of both angiotensin I and bradykinin. Intravenous injection of artemetin (0.75 mg/kg) significantly reduced the hypertensive response to angiotensin I while increased the average length of bradykinin-induced hypotension. Artemetin (1.5 mg/kg, p.o.) was also able to reduce plasma (about 37%) and vascular (up to 63%) ACE activity in vitro, compared to control group. On the other hand, artemetin did not change angiotensin II-induced hypertension. Our study is the first showing the hypotensive effects induced by the extract and fractions obtained from A. millefollium. In addition, our results disclosed that this effect may be, at least in part, associated with high levels of artemetin and its ability to decrease angiotensin II generation in vivo, by ACE inhibition.     

Sorption of heavy metals from electroplating effluent using immobilized biomass Trichoderma viride in a continuous packed-bed column

The sorption of heavy metals ions by immobilized Trichoderma viride biomass in a packed-bed column was studied. Fungal biomass T. viride was immobilized to Ca-alginate used for removal of Cr(VI), Ni(II) and Zn(II) ions from synthetic solutions and electroplating effluent. The experiments were conducted to study the effect of important design parameters such as bed height, flow rate and initial concentration of metal ions. The maximum sorption capacity was observed at flow rate 5 ml/min, bed height 20 cm and metal ions concentration 50 mg/L with immobilized biomass. Whereas, breakthrough time and saturation time decreased with increase flow rate and metal ions concentration and an inverse condition was found in bed height. The bed depth service time (BDST) Adams-Bohart model was used to analyze the experimental data. The regeneration efficiency was observed 40.1%, 75% and 53% for Cr(VI), Ni(II) and Zn(II) without any significant alteration in sorption capacity after 5th sorption-desorption cycles.     

Statistical modelling and optimization of substrate composition for bacterial growth and cadmium removal using response surface methodology

In this study, substrate composition was optimized for the growth of Achromobacter xyloxidans and biosorption of Cd(II) from aqueous solution. Response surface methodology (RSM) was used to investigate the function of three independent operating variables, namely, peptone (2.5-10 g/L), beef extract (2.5-5.0 g/L) and incubation time (24-96 h), on dependent variables, i.e. sorption of Cd(II) ions, protein content and biomass growth of A. xyloxidans. The maximum Cd(II) removal efficiency of 69.2%, protein content 1.9 mg/L and growth 0.354 optical density was found at optimal conditions of peptone 10 g/L, incubation time 60 h and beef extract 2.5 g/L. The significance of independent variables and interactions between variables were tested by means of the analysis of variance (ANOVA) with 95% confidence limits and values of “Prob > F” less than 0.0500 indicate that model terms are significant. Fourier transfer infrared (FTIR) analysis was used to investigate sorption mechanism and involved functional groups in Cd(II) binding.     

Accumulation of lead by free and immobilized cyanobacteria with special reference to accumulation factor and recovery

Lead accumulation by free and immobilized cyanobacteria, Lyngbya majuscula and Spirulina subsalsa was studied. Exponentially growing biomass was exposed to 1-20 mg L⁻¹ of Pb(II) solution at pH 6, 7 and 8 for time periods ranging from 10 min to 48 h. L. majuscula accumulated 10 times more Pb (13.5 mg g⁻¹) than S. subsalsa (1.32 mg g⁻¹) at pH 6 within 3 h of exposure to 20 mg L⁻¹ Pb(II) solution and 76% of the Pb could be recovered using 0.1 M EDTA. This chelator (2 μM) did not influence Pb accumulation whereas 100 μM citrate increased that of S. subsalsa 6- to 8-fold. L. majuscula filaments enmeshed in a glass wool packed in a column removed 95.8% of the Pb from a 5 mg L⁻¹ Pb solution compared to free and dead biomass which removed 64 and 33.6% Pb respectively. A 92.5% recovery of accumulated Pb from the immobilized biomass suggests that repeated absorption-desorption is possible.     

Performance of a membrane bioreactor used for the treatment of wastewater contaminated with heavy metals

In this work the performance of a Membrane bioreactor (MBR) was assessed for the removal of 3-15 mg/l of copper, lead, nickel and zinc from wastewater. The average removal efficiencies accomplished by the MBR system were 80% for Cu(II), 98% for Pb(II), 50% for Ni(II) and 77% for Zn(II). The addition of 5 g/l vermiculite into the biological reactor enhanced metal removal to 88% for copper, 85% for zinc and 60% for nickel due to adsorption of metal ions on the mineral, while it reduced biomass inhibition and increased biomass growth. The metal ions remaining in soluble form penetrated into the permeate, while those attached to sludge flocs were effectively retained by the ultrafiltration membranes. The average heterotrophic biomass inhibition was 50%, while it reduced to 29% when lower metal concentrations were fed into the reactor in the presence of vermiculite. The respective autotrophic biomass inhibition was 70% and 36%. The presence of heavy metals and vermiculite in the mixed liquor adversely impacted on membrane fouling.     

Equilibrium and structural studies on Co(II), Ni(II), Cu(II) and Zn(II) complexes with N-(2-benzimidazolyl)methyliminodiacetic acid: crystal structures of Ni(II) and Cu(II) complexes

Combined pH-metric, UV-Vis, ¹H NMR and EPR spectral investigations on the complex formation of M(II) ions (M=Co, Ni, Cu and Zn) with N-(2-benzimidazolyl)methyliminodiacetic acid (H₂bzimida, hereafter H₂L) in aqueous solution at a fixed ionic strength, I=10⁻¹ mol dm⁻³, at 25 ± 1 °C indicate the formation of M(L), M(H₋₁L)⁻ and M₂(H₋₁L)⁺ complexes. Proton-ligand and metal-ligand constants and the complex formation equilibria have been elucidated. Solid complexes, [M(L)(H₂O)₂] · nH₂O (n=1 for M = Co and Zn, n=2 for M = Ni) and {Cu (μ-L) · 4H₂O}_n, have been isolated and characterized by elemental analysis, spectral, conductance and magnetic measurements and thermal studies. Structures of [Ni(L)(H₂O)₂] · 2H₂O and {Cu(μ-L) · 4H₂O}_n have been determined by single crystal X-ray diffraction. The nickel(II) complex exists in a distorted octahedral environment in which the metal ion is coordinated by the two carboxylate O atoms, the amino-N atom of the iminodiacetate moiety and the pyridine type N-atom of the benzimidazole moiety. Two aqua O atoms function as fifth and sixth donor atoms. The copper(II) complex is made up of interpenetrating polymeric chains of antiferromagnetically coupled Cu(II) ions linked by carboxylato bridges in syn-anti (apical-equatorial) bonding mode and stabilized via interchain hydrogen bonds and π-π stacking interactions.     

Evaluation and elimination of inhibitory effects of salts and heavy metal ions on biodegradation of Congo red by Pseudomonas sp. mutant

In this study, it was attempted to evaluate the influences and also recommended some elimination methods for inhibitory effects offered by salts and heavy metal ions. Congo red dye solution treated with mutant Pseudomonas sp. was taken as a model system for study. The salts used in this study are NaCl, CaCl₂ and MgSO₄·7H₂O. Though the growth was inhibited at concentrations above 4 g/l, toleration was achieved by acclimatization process. In case of heavy metal ions, Cr (VI) showed low inhibition up to 500 mg/l of concentration, compared to Zn (II) and Cu (II). It was due to the presence of chromium reductase enzyme which was confirmed by SDS-PAGE. Zn (II) and Cu (II) ion inhibitions were eliminated by chelation with EDTA. The critical ion concentrations obtained as per Han-Levenspiel model for Cr (VI), Zn (II) and Cu (II) were 0.8958, 0.3028 and 0.204 g/l respectively.     

Effect of copper exposure on GST activity and on the expression of four GSTs under oxidative stress condition in the monogonont rotifer, Brachionus koreanus

Glutathione S-transferases (GSTs; EC 2.5.1.18) are major enzymes that function in Phase II detoxification reactions by catalyzing the conjugation of reduced glutathione through cysteine thiol. In this study, we cloned and sequenced four GST genes from the monogonont rotifer Brachionus koreanus. The domain regions of four Bk-GSTs showed a high similarity to those of other species. In addition, to evaluate the potential of GST genes as an early warning signal for oxidative stress, we exposed sublethal concentrations of copper (Cu) to B. koreanus and measured glutathione (GSH) contents and several antioxidant enzymes such as glutathione S-transferase (GST), glutathione peroxidase (GPx; EC 1.11.1.9), and glutathione reductase (GR; EC 1.8.1.7). The reactive oxygen species (ROS) at 12 h and 24 h after copper exposure increased significantly. GSH contents however did not increase significantly and even it decreased at 0.24 mg/L at 12 h. The activities of several antioxidant enzymes, particularly GPx and GR, showed a dramatic increase in 0.24 mg/L of CuCl₂. Messenger RNAs of each Bk-GST showed different patterns of modulations according to GST types, and particularly, Bk-GST-omega, Bk-GST-sigma, and Bk-GST zeta genes were highly sensitive to Cu. These results indicate that Bk-GSTs, functioning as one of the enzymatic defense mechanisms particularly in the early stage of oxidative stress response, were induced by Cu exposure. This also suggests that these genes and related enzymes have a potential as biomarkers for a more sensitive initial stress response.     

Efficient mosquitocidal toxin production by Bacillus sphaericus using cheese whey permeate under both submerged and solid state fermentations

Whey permeate (WP) was used efficiently for production of mosquitocidal toxin by Bacillus sphaericus 2362 (B. sphaericus 2362) and the Egyptian isolate, B. sphaericus 14N1 (B. sphaericus 14N1) under both submerged and solid state fermentation conditions. Under submerged fermentation, high mosquitocidal activity was produced by B. sphaericus 2362 and B. sphaericus 14N1 at 50-100% and 25-70% WP, respectively. Initial pH of WP was a critical factor for toxin production by both tested organisms. The highest toxicity was obtained at initial pH 7. Egyptian isolate, B. sphaericus 14N1 was tested for growth and toxin production under solid state fermentation conditions (SSF) by using WP as moistening agent instead of distilled water. The optimum conditions for production of B. sphaericus 14N1 on wheat bran-WP medium were 10 g wheat bran/250 ml flask moistened with 10-70% WP at 50% moisture content, inoculum size ranged between 17.2 × 10⁷ and 34.4 × 10⁷ and 6 days incubation under static conditions at 30 °C. Preliminary pilot-scale production of B. sphaericus 14N1 under SSF conditions in trays proved that wheat bran-WP medium was efficient and economic for industrial production of mosquitocidal toxin by B. sphaericus.     

Structural and equilibrium studies on mixed ligand complexes of Co(II), Ni(II), Cu(II) and Zn(II) with N-(2-benzimidazolyl)methyliminodiacetic acid and typical N, N donor ligands

Mixed ligand complexes: [Co(L)(bipy)] · 3H₂O (1), [Ni(L)(phen)] · H₂O (2), [Cu(L)(phen)] · 3H₂O (3) and [Zn(L)(bipy)] · 3H₂O (4), where L²⁻ = two -COOH deprotonated dianion of N-(2-benzimidazolyl)methyliminodiacetic acid (H₂bzimida, hereafter, H₂L), bipy = 2,2′ bipyridine and phen = 1,10-phenanthroline have been isolated and characterized by elemental analysis, spectral and magnetic measurements and thermal studies. Single crystal X-ray diffraction studies show octahedral geometry for 1, 2 and 4 and square pyramidal geometry for 3. Equilibrium studies in aqueous solution (ionic strength I = 10⁻¹ mol dm⁻³ (NaNO₃), at 25 ± 1 °C) using different molar proportions of M(II):H₂L:B, where M = Co, Ni, Cu and Zn and B = phen, bipy and en (ethylene diamine), however, provides evidence of formation of mononuclear and binuclear binary and mixed ligand complexes: M(L), M(H₋₁L)⁻, M(B)²⁺, M(L)(B), M(H₋₁L)(B)⁻, M₂(H₋₁L)(OH), (B)M(H₋₁L)M(B)⁺, where H₋₁L³⁻ represents two -COOH and the benzimidazole N₁-H deprotonated quadridentate (O⁻, N, O⁻, N), or, quinquedentate (O⁻, N, O⁻, N, N⁻) function of the coordinated ligand H₂L. Binuclear mixed ligand complex formation equilibria: M(L)(B) + M(B)²⁺ ? (B)M(H₋₁L)M(B)⁺ + H⁺ is favoured with higher π-acidity of the B ligands. For Co(II), Ni(II) and Cu(II), these equilibria are accompanied by blue shift of the electronic absorption maxima of M(II) ions, as a negatively charged bridging benzimidazolate moiety provides stronger ligand field than a neutral one. Solution stability of the mixed ligand complexes are in the expected order: Co(II) < Ni(II) < Cu(II) > Zn(II). The Δ log K_M values are less negetive than their statistical values, indicating favoured formation of the mixed ligand complexes over the binary ones.     

Characterization and antimicrobial activity of water-soluble N-(4-carboxybutyroyl) chitosans against some plant pathogenic bacteria and fungi

Water-soluble N-(4-carboxybutyroyl) chitosan derivatives with different degrees of substitution (DS) were synthesized to enhance the antimicrobial activity of chitosan molecule against plant pathogens. Chitosan in a solution of 2% aqueous acetic acid-methanol (1:1, v/v) was reacted with 0.1, 0.3, 0.6 and 1 mol of glutaric anhydride to give N-(4-carboxybutyroyl) chitosans at DS of 0.10, 0.25, 0.48 and 0.53, respectively. The chemical structures and DS were characterized by ¹H and ¹³C NMR spectroscopy, which showed that the acylate reaction took place at the N-position of chitosan. The synthesized derivatives were more soluble than the native chitosan in water and in dilute aqueous acetic acid and sodium hydroxide solutions. The antimicrobial activity was in vitro investigated against the most economic plant pathogenic bacteria of Agrobacterium tumefaciens and Erwinia carotovora and fungi of Botrytis cinerea, Pythium debaryanum and Rhizoctonia solani. The antimicrobial activity of N-(4-carboxybutyroyl) chitosans was strengthened than the un-modified chitosan with the increase of the DS. A compound of DS 0.53 was the most active one with minimum inhibitory concentration (MIC) of 725 and 800 mg/L against E. carotovora and A. tumefaciens, respectively and also in mycelial growth inhibiation against B. cinerea (EC₅₀ = 899 mg/L), P. debaryanum (EC₅₀ = 467 mg/L) and R. solani (EC₅₀ = 1413 mg/L).     

Evaluation of a diospyrin derivative as antileishmanial agent and potential modulator of ornithine decarboxylase of Leishmania donovani

World health organization has called for academic research and development of new chemotherapeutic strategies to overcome the emerging resistance and side effects exhibited by the drugs currently used against leishmaniasis. Diospyrin, a bis-naphthoquinone isolated from Diospyros montana Roxb., and its semi-synthetic derivatives, were reported for inhibitory activity against protozoan parasites including Leishmania. Presently, we have investigated the antileishmanial effect of a di-epoxide derivative of diospyrin (D17), both in vitro and in vivo. Further, the safety profile of D17 was established by testing its toxicity against normal macrophage cells (IC₅₀ ∼ 20.7 μM), and also against normal BALB/c mice in vivo. The compound showed enhanced activity (IC₅₀ ∼ 7.2 μM) as compared to diospyrin (IC₅₀ ∼ 12.6 μM) against Leishmania donovani promastigotes. Again, D17 was tested on L. donovani BHU1216 isolated from a sodium stibogluconate-unresponsive patient, and exhibited selective inhibition of the intracellular amastigotes (IC₅₀ ∼ 0.18 μM). Also, treatment of infected BALB/c mice with D17 at 2 mg/kg/day reduced the hepatic parasite load by about 38%. Subsequently, computational docking studies were undertaken on selected enzymes of trypanothione metabolism, viz. trypanothione reductase (TryR) and ornithine decarboxylase (ODC), followed by the enzyme kinetics, where D17 demonstrated non-competitive inhibition of the L. donovani ODC, but could not inhibit TryR.     

Synthetic, EPR spectroscopic, magnetic and X-ray crystallographic structural studies on copper(II) complexes of the tridentate N2S donor ligand formed from 6-methyl-2-formylpyridine and S-methyldithiocarbazate (Hmpsme)

New copper(II) complexes of general empirical formula, Cu(mpsme)X · xCH₃COCH₃ (mpsme = anionic form of the 6-methyl-2-formylpyridine Schiff base of S-methyldithiocarbazate; X = Cl, N₃, NCS, NO₃; x = 0, 0.5) have been synthesized and characterized by IR, electronic, EPR and susceptibility measurements. Room temperature μ_eff values for the complexes are in the range 1.75-2.1 μ_B typical of uncoupled or weakly coupled Cu(II) centres. The EPR spectra of the [Cu(mpsme)X] (X = Cl, N₃, NO₃, NCS) complexes reveal a tetragonally distorted coordination sphere around the mononuclear Cu(II) centre. We have exploited second derivative EPR spectra in conjunction with Fourier filtering (sine bell and Hamming functions) to extract all of the nitrogen hyperfine coupling matrices. While the X-ray crystallography of [Cu(mpsme)NCS] reveals a linear polymer in which the thiocyanate anion bridges the two copper(II) ions, the EPR spectra in solution are typical of a magnetically isolated monomeric Cu(II) centres indicating dissociation of the polymeric chain in solution. The structures of the free ligand, Hmpsme and the {[Cu(mpsme)NO₃] · 0.5CH₃COCH₃}₂ and [Cu(mpsme)NCS]_n complexes have been determined by X-ray diffraction. The {[Cu(mpsme)NO₃] 0.5CH₃COCH₃}₂ complex is a centrosymmetric dimer in which each copper atom adopts a five-coordinate distorted square-pyramidal geometry with an N₂OS₂ coordination environment, the Schiff base coordinating as a uninegatively charged tridentate ligand chelating through the pyridine and azomethine nitrogen atoms and the thiolate, an oxygen atom of a unidentate nitrato ligand and a bridging sulfur atom from the second ligand completing the coordination sphere. The [Cu(mpsme)(NCS)]_n complex has a novel staircase-like one dimensional polymeric structure in which the NCS⁻ ligands bridge two adjacent copper(II) ions asymmetrically in an end-to-end fashion providing its nitrogen atom to one copper and the sulfur atom to the other.     

Loop-mediated isothermal amplification assays for identification of antiseptic- and methicillin-resistant Staphylococcus aureus

A method for rapid identification of antiseptic- and methicillin-resistant Staphylococcus aureus (MRSA) based on 3 loop-mediated isothermal amplification (LAMP) assays was developed. LAMP targeting the femB gene identified S. aureus with 100% specificity, and LAMP targeting the mecA gene associated with methicillin resistance identified methicillin-resistant staphylococci with 100% specificity. LAMP targeting the qacA/B gene encoding an efflux pump responsible for antiseptic resistance identified high-acriflavine-resistant (MIC ≥ 100 mg/L) MRSA (92.5% positive) and acriflavine-susceptible (MIC < 25 mg/L) MRSA (100% negative). They were performed under the same reaction conditions within 60 min at 63 °C. The combined LAMP assays will be useful for rapid identification of S. aureus isolates and determination of their antibiotic and antiseptic resistance patterns with regard to methicillin and organic cationic substrates.