Genetic and physical mapping of the lateral suppressor (ls) locus in tomato

Tomato plants homozygous for the recessive lateral suppressor (ls) mutation show a number of phenotypic abnormalities among which the lack of lateral meristem initiation during vegetative growth and the absence of petals on the flower are the most prominent. As a first step towards the isolation of the Ls gene by means of map-based cloning, we have determined its position on the restriction fragment length polymorphism (RFLP) map of tomato. RFLP analysis of 527 F2 plants segregating for the ls allele allowed us to define an interval of 0.8 cM in which the Ls gene is located. Analysis of the physical distance between the two flanking RFLP markers by pulsed field gel electrophoresis revealed that they lie no further than 375 kb apart. Knowledge of the physical distance together with the availability of a tomato yeast artificial chromosome (YAC) library, makes it feasible to isolate the Ls gene by a map-based cloning approach.     

Genetic analysis of two tomato mutants affected in the regulation of iron metabolism

Iron is one of the most important micronutrients for plants. Like other organisms, plants have developed active mechanisms for the acquisition of sufficient iron from the soil. Nevertheless, very little is known about the genetic mechanisms that control the active uptake. In tomato, two spontaneously derived mutants are available, which are defective in key steps that control this process. The recessive mutationchloronerva (chln) affects a gene which controls the synthesis of the non-protein amino acid nicotianamine (NA), a key component in the iron physiology of plants. The root system of the recessive mutantfer is unable to induce any of the characteristic responses to iron deficiency and iron uptake is thus completely blocked. We present a characterization of the double mutant, showing that thefer gene is epistatic over thechln gene and thus very likely to be one of the major genetic elements controlling iron physiology in tomato. In order to gain access to these two genes at the molecular level, both mutants were precisely mapped onto the high density RFLP map of tomato. Thechln gene is located on chromosome 1 and thefer gene is on chromosome 6 of tomato. Using this high-resolution map, a chromosome walk has been started to isolate thefer gene by map-based cloning. The isolation of thefer gene will provide new insights into the molecular mechanisms of iron uptake control in plants.     

Map-based cloning in crop plants. Tomato as a model system: I. Genetic and physical mapping of jointless

A map-based cloning scheme is being used to isolate the jointless (j) gene of tomato. The jointless locus is defined by a single recessive mutation that completely suppresses the formation of the fruit and flower pedicel and peduncle abscission zone. jointless was mapped in an F₂ population of an interspecific cross between Lycopersicon esculentum and Lycopersicon pennellii to a 7.1 cM interval between two restriction fragment length polymorphism (RFLP) markers TG523 and TG194. Isogenic DNA pools were then constructed from a subset of the mapping population and screened with 800 random decamers for random amplification of polymorphic DNA (RAPD) polymorphisms. Five new RAPD markers were isolated and mapped to chromosome 11, two of which were mapped within the targeted interval. One marker, RPD158, was mapped 1.5 cM to the opposite side of jointless relative to TG523 and thus narrowed the interval between the closest flanking markers to 3.0 cM. Physical mapping by pulse-field gel electrophoresis using TG523 and RPD158 as probes demonstrated that both markers hybridize to a common 600 kb SmaI restriction fragment. This provided an estimate of 200 kb/cM for the relationship between physical and genetic distances in the region of chromosome 11 containing the j locus. The combined results provide evidence for the feasibility of the next step toward isolation of the jointless gene by map-based cloning — a chromosome walk or jump to jointless.     

Saturation mapping with subclones of YACs: DNA marker production targeting the rice blast disease resistance gene, Pi-b

Saturation mapping of a very small genomic region is indispensable for map-based cloning. We applied a method based on sub-cloning and the Southern-hybridization technique for generating RFLP markers directly from yeast artificial chromosomes (YACs). Two YACs overlapping each other and covering the locus of the rice blast resistance gene, Pi-b, were used to construct a plasmid sub-library. Rice-specific and single-copy clones suitable as probes for RFLP analysis were selected from this sub-library by hybridization to the blots of digested DNAs of rice, YACs, and yeast. As a result, 22 markers were produced within a small chromosomal region including Pi-b. This case study shows that overlapping YACs known to cover the gene of interest are very useful in fine-scale physical mapping leading to map-based cloning of the target gene. Received: 2 May 1996 / Accepted: 2 August 1996     

Chromosomal localization and molecular-marker tagging of the powdery mildew resistance gene (Lv) in tomato

We report the tagging of a powdery mildew [Leveillula taurica (Lév.) Arnaud.] resistance gene (Lv) in tomato using RAPD and RFLP markers. DNA from a resistant (cv Laurica) and a susceptible cultivar were screened with 300 random primers that were used to amplify DNA of resistant and susceptible plants. Four primers yielded fragments that were unique to the resistant line and linked to the resistance gene in an F₂ population. One of these amplified fragments, OP248, with a molecular weight of 0.7 kb, was subsequently mapped to chromosome 12, 1 cM away from CT134. Using RFLP markers located on chromosome 12, it was shown that approximately one half of chromosome 12 (about 42 cM), in the resistant variety is comprised of foreign DNA, presumably introgressed with the resistance gene from the wild species L. chilense. Further analysis of a backcross population revealed that the Lv gene lies in the 5.5-cM interval between RFLP markers, CT211 and CT219. As a prelude to map-based cloning of the Lv gene, we are currently enriching the density of markers in this region by a combination of RAPD primers and other techniques.     

High-density physical maps reveal that the dominant male-sterile gene Ms3 is located in a genomic region of low recombination in wheat and is not amenable to map-based cloning

In wheat it is essential to know whether a gene is located in a high or low recombination region of the genome before initiating a map-based cloning approach. The objective of this study was to explore the potential feasibility of map-based cloning of the dominant male-sterile gene Ms3 of wheat. High-density physical maps of the short arms of the group-5 chromosomes (5AS, 5BS, and 5DS) of Triticum aestivum L. were constructed by mapping 40 DNA markers on a set of 17 homozygous deletion lines. One hundred RFLP loci were mapped: 35 on 5AS, 37 on 5BS, and 28 on 5DS. A consensus physical map was colinearly aligned with a consensus genetic map of the group-5 short arms. Sixteen of the 17 markers in the consensus genetic map encompass a genetic distance of 25 cM and correspond to the distal region (FL 0.56–0.97) of the consensus physical map. Two rice probes, RG463 and RG901, previously identified to be linked to markers CDO344 and CDO749 (group-5 short arm of wheat), respectively, in the genetic map of rice chromosome 12, map between FL 0.56 and 0.63 in the consensus map. Thus at least a part of the group-5 short arm is homoeologous to a region of chromosome 12 of rice. The genetic map of chromosome arm 5AS was constructed using a population of 139 BC₁ plants derived from a cross between the euploid wheat ”Chris” carrying a dominant male-sterile gene Ms3 and a disomic substitution line in which chromosome 5A of T. aestivum cv Chinese Spring was substituted by chromosome 5A from Triticum turgidum ssp. dicoccoides. The map has a genetic length of 53.4 cM with 11 DNA markers. The initial map showed that the gene Ms3 cosegregated with three markers, WG341, BCD1130 and CDO677. High-resolution mapping using an additional 509 BC₁ plants indicated that the marker WG341 was closely linked to Ms3 at a genetic distance of 0.8 cM. The Ms3 was mapped physically in the region spanning 40% of the arm length from the centromere of 5AS. Therefore, map-based cloning of the Ms3 is not feasible, although WG341 can be used as a useful tag for the Ms3 gene for breeding purposes. Received: 12 December 2000 / Accepted: 26 January 2001     

Correlation of genetic and physical structure in the region surrounding the I2Fusarium oxysporum resistance locus in tomato

Summary The dominant gene I ₂ confers on tomato (Lycopersicon esculentum) resistance against the fungus Fusarium oxysporum f. sp. lycopersici race 2. A restriction fragment length polymorphism (RFLP) marker, TG105, has recently been found to be tightly linked to I ₂. The potential for cloning this gene by a reverse genetics approach prompted us to describe in both genetic and physical detail the region surrounding the I ₂ locus on chromosome 11. We have analyzed patterns of segregation of RFLP markers on chromosome 11 and Fusarium resistance in 140 F₂ plants from a cross between Fusarium-resistant and susceptible parental lines. Marker TG105 mapped 0.4 centi-Morgan (CM) from I ₂. Physical analysis of TG105 and its flanking RFLP markers, TG26 and TG36, by pulsed field gradient gel electrophoresis (PFGE) yielded a restriction map for this region encompassing at least 620 kb of the tomato genome. TG105 and TG26 hybridized to the same 175 kb MluI-NruI restriction fragment. We have therefore linked two genetically distinct RFLP markers. Based on the 4.1 cM distance between them, we have assigned a mean value of 43 kb for each cM recombination distance in the vicinity of I ₂. This local ratio between physical and genetic distances is more than 10-fold below the average for the tomato genome. It should therefore be possible to clone I ₂ by chromosome walking from TG105.     

Genetic mapping of a new semi-dwarf gene, <Emphasis Type="Italic">sd-t(t)</Emphasis>, in indica rice and estimating of the physical distance of the mapping region

Application and functional study of dwarf and semi-dwarf genes are of great importance to both crop breeding and molecular biology. A new semi-dwarf gene, sd-t(t), non-allelic to sd-1, had been identified in an indica rice variety, Aitaiyin 2. In this study the gene was genetically mapped by using an F₂ population, which consisted of 474 individuals developed from a cross between Aitaiyin 2 and B30. The sd-t(t) gene was located between the RFLP markers R514 and R1408B with a distance of 1.1 cM to R514, and 4.5 cM to R1408B on chromosome 4. A physical contig covering the sd-t(t) mapping region was further constructed by screening a BAC library with R514 and R1408B as probes, and the physical distance between R514 and R1408B was estimated at approximately 147 kb. This result will facilitate map-based cloning of the sd-t(t) gene.     

Genetic mapping of jointless-2 to tomato chromosome 12 using RFLP and RAPD markers

Abscission zones are specialized regions in plants, usually located at the base of most plant parts, such as flowers, fruit and leaves, where organs are shed. Although a great deal of information is known about the physiological and biochemical events that lead to organ shedding, very little is known of the molecular events that lead to the formation of the abscission zone itself. In tomato, two recessive mutations have been discovered that completely suppress the formation of flower and fruit pedicel abscission zones, i.e., jointless (j) and jointless-2 (j-2), both tentatively localized to chromosome 11 about 30 cM apart. Because the study of the control of abscission zone development is important for both basic and applied research we are using a map-based cloning approach to identify the jointless genes. The first step in any positional cloning experiment is to establish segregating mapping populations for the target gene and identify closely linked molecular markers that flank the locus. In this study, bulked segregant analysis was used to identify a RAPD marker associated with the j-2 locus, RPD140. To determine the chromosome location of RPD140, we converted it to an RFLP marker that was then mapped on the Cornell reference tomato map in a marker-dense region of chromosome 12. To verify that the j-2 locus was located on tomato chromosome 12, we used nine chromosome 12 RFLP markers linked with RPD140 to map the j-2 gene in an interspecific F₂ mapping population of 151 plants segregating for j-2. The j-2 gene was localized to a 3.0-cM interval between RPD140 and TG618 on tomato chromosome 12. Received: 29 March 1999 / Accepted: 13 October 1999     

A 610 kb YAC clone harbors 7 cM of tomato (Lycopersicon esculentum) DNA that includes themale sterile 14 gene and a hotspot for recombination

Pollen development requires both sporophytic and gametophytic gene expression. We are using a map-based cloning technique to isolate sporophytic genes which, when mutant, cause pollen abortion and a male sterile (ms) phenotype in tomato (Lycopersicon esculentum). We have genetically characterized onems locus (ms14) using RFLP analysis and identified flanking markers. High-resolution genomic physical mapping indicates that thems14 locus is located in a 300 kb region. We have identified a YAC clone with an insert size of 610 kb that contains thems14-linked markers, reflects the organization of the physical map and therefore most probably contains thems14 gene. In addition, we present evidence that the relationship between physical and genetic distance in this chromosomal region changes abruptly from 105–140 kb/cM to less than 24 kb/cM, and suggest that the TG393-TG104 region is a hotspot for recombination.     

Analysis of rice (Oryza sativa L.) genome using pulsed-field gel electrophoresis and rare-cutting restriction endonucleases

TheOryza sativa (rice) genome is small (600 to 900 megabase pairs) when compared to that of other monocotyledonous plants. Rice was the first of the major cereals to be successfully transformed and regenerated. An RFLP map with approximately 300 markers is readily available, and the DNA content per map unit is only two to three times that ofArabidopsis thaliana. Rice is also the main staple food for the majority of peoples in the world. We developed techniques for the preparation of intact genomic DNA from Indica and Japonica subspecies of rice, used statistical methods to determine which restriction endonucleases are rare-cutting, and used pulsed-field gel electrophoresis (PFE) to separate large fragments of rice DNA. Southern hybridization to blotted rice PFE gels was used to show that the digests were complete. The long-term goal of our work is to generate an integrated genetic/physical map for the rice genome, as well as helping to establish rice as a model for map-based gene cloning and genome analysis.     

High resolution RFLP map around the root knot nematode resistance gene (Mi) in tomato

Summary In the 1940's the root-knot nematode resistance gene (Mi) was introgressed into the cultivated tomato from the wild species, L. peruvianum, and today it provides the only form of genetic resistance against this pathogen. We report here the construction of a high resolution RFLP map around the Mi gene that may aid in the future cloning of this gene via chromosome walking. The map covers the most distal nine map units of chromosome 6 and contains the Mi gene, nine RFLP markers, and one isozyme marker (Aps-1). Based on the analysis of more than 1,000 F₂ plants from four crosses, we were able to pinpoint the Mi gene to the interval between two of these markers — GP79 and Aps-1. In crosses containing the Mi gene, this interval is suppressed in recombination and is estimated to be 0.4 cM in length. In contrast, for a cross not containing Mi, the estimated map distance is approximately 5 times greater (ca. 2 cM).Using RFLP markers around Mi as probes, it was possible to classify nematode resistant tomato varieties into three types based on the amount of linked peruvianum DNA still present. Two of these types (representing the majority of the varieties tested) were found to still contain more than 5 cM of peruvianum chromosome — a result that may explain some of the negative effects (e.g. fruit cracking) associated with nematode resistance. The third type (represented by a single variety) is predicted to carry a very small segment of peruvianum DNA (<2 cM) and may be useful in the identification of additional markers close to Mi and in the orientation of clones during a chromosome walk to clone the gene.     

Long-range physical maps of two loci (Aps-1 and GP79) flanking the root-knot nematode resistance gene (Mi) near the centromere of tomato chromosome 6

The root knot nematode resistance gene Mi in tomato has been mapped in the pericentromeric region of chromosome 6. With the objective of isolating Mi through a map-based cloning approach, we have previously identified and ordered into a high-resolution genetic linkage map a variety of tightly linked molecular markers. Using pulsed-field gelelectrophoresis and various rarely cutting restriction enzymes in single, double and partial digestions, we now report long-range physical maps of the two closest flanking markers, acid phosphatase-1 (Aps-1) and GP79, which span over 400 and 800 kb, respectively. It is concluded that the physical distance between both markers is larger than predicted on the basis of genetic linkage analysis. Furthermore, two RFLP markers (H3F8 and H4H10) which map genetically to the same locus as Aps-1 do not show physical linkage, indicating severe suppression of recombination in this region of the chromosome. Finally, no evidence was obtained showing the presence of a CpG island near Aps-1.     

Map-based cloning in crop plants: tomato as a model system II. Isolation and characterization of a set of overlapping yeast artificial chromosomes encompassing the jointless locus

A map-based cloning technique for crop plants is being developed using tomato as a model system. The target gene jointless is a recessive mutation that completely suppresses the formation of flower and fruit pedicel abscission zones. Previously, the jointless locus was mapped to a 3 cM interval between the two molecular markers TG523 and RPD158. Physical mapping of the jointless region by pulsed-field gel electrophoresis demonstrated that TG523 and RPD158 reside on a 600 kb SmaI fragment. In this study, TG523 was used as a probe to screen a tomato yeast artificial chromosome (YAC) library. Six tomato YAC (TY) clones were isolated, ranging from 220 to 380 kb in size. Genetic mapping of YAC ends demonstrated that this set of overlapping YACs encompasses the jointless locus. Two YAC ends, TY159L (L indicates left end) and TY143R (R indicates right end), cosegregate with the jointless locus. Only one of the six YACs (TY142) contained single-copy DNA sequences at both ends that could be mapped. The two ends of TY142 were mapped to either side of the jointless locus, indicating that TY142 contains a contiguous 285 kb tomato DNA fragment that probably includes the jointless locus. Physical mapping of the TY142 clone revealed that TY159L and TY143R reside on a 55 kb SalI fragment. Southern blot hybridization analysis of the DNAs of tomato lines nearly isogenic for the jointless mutation has allowed localization of the target locus to a region of less than 50 kb within the TY142 clone.Communicated by H. Saedler     

Molecular genetic analysis of theripening-inhibitor andnon-ripening loci of tomato: A first step in genetic map-based cloning of fruit ripening genes

Ripening represents a complex developmental process unique to plants. We are using tomato fruit ripening mutants as tools to understand the regulatory components that control and coordinate the physiological and biochemical changes which collectively confer the ripe phenotype. We have genetically characterized two loci which result in significant inhibition of the ripening process in tomato,ripening-inhibitor (rin), andnon-ripening (nor), as a first step toward isolating genes likely to encode key regulators of this developmental process. A combination of pooled-sample mapping as well as classical restriction fragment length polymorphism (RFLP) analysis has permitted the construction of high-density genetic maps for the regions of chromosomes 5 and 10 spanning therin andnor loci, respectively. To assess the feasibility of initiating a chromosome walk, physical mapping of high molecular weight genomic DNA has been employed to estimate the relationship between physical distance (in kb) and genetic distance (in cM) around the targeted loci. Based on this analysis, the relationship in the region spanning therin locus is estimated to be 200–300 kb/cM, while thenor locus region ratio is approximately 200 kb/1 cM. Using RFLP markers tightly linked torin andnor, chromosome walks have been initiated to both loci in a yeast artificial chromosome (YAC) library of tomato genomic DNA. We have isolated and characterized several YAC clones linked to each of the targeted ripening loci and present genetic evidence that at least one YAC clone contains thenot locus.     

Mapping a new nematode resistance locus in Lycopersicon peruvianum

Accessions of the wild tomato species L. peruvianum were screened with a root-knot nematode population (557R) which infects tomato plants carrying the nematode resistance gene Mi. Several accessions were found to carry resistance to 557R. A L. peruvianum backcross population segregating for resistance to 557R was produced. The segregation ratio of resistant to susceptible plants suggested that a single, dominant gene was a major factor in the new resistance. This gene, which we have designated Mi-3, confers resistance against nematode strains that can infect plants carrying Mi. Mi-3, or a closely linked gene, also confers resistance to nematodes at 32°C, a temperature at which Mi is not effective. Bulked-segregant analysis with resistant and susceptible DNA pools was employed to identify RAPD markers linked to this gene. Five-hundred-and-twenty oligonucleotide primers were screened and two markers linked to the new resistance gene were identified. One of the linked markers (NR14) was mapped to chromosome 12 of tomato in an L. esculentum/L. pennellii mapping population. Linkage of NR14 and Mi-3 with RFLP markers known to map on the short arm of chromosome 12 was confirmed by Southern analysis in the population segregating for Mi-3. We have positioned Mi-3 near RFLP marker TG180 which maps to the telomeric region of the short arm of chromosome 12 in tomato.     

A 610 kb YAC clone harbors 7 cM of tomato (Lycopersicon esculentum) DNA that includes themale sterile 14 gene and a hotspot for recombination

Pollen development requires both sporophytic and gametophytic gene expression. We are using a map-based cloning technique to isolate sporophytic genes which, when mutant, cause pollen abortion and a male sterile (ms) phenotype in tomato (Lycopersicon esculentum). We have genetically characterized onems locus (ms14) using RFLP analysis and identified flanking markers. High-resolution genomic physical mapping indicates that thems14 locus is located in a ～300 kb region. We have identified a YAC clone with an insert size of ～610 kb that contains thems14-linked markers, reflects the organization of the physical map and therefore most probably contains thems14 gene. In addition, we present evidence that the relationship between physical and genetic distance in this chromosomal region changes abruptly from ～105–140 kb/cM to less than 24 kb/cM, and suggest that the TG393-TG104 region is a hotspot for recombination.     

RFLP mapping of a major bruchid resistance gene in mungbean (Vigna radiata,L. Wilczek)

Summary Bruchids (genus Callosobruchus) are among the most destructive insect pests of mungbeans and other members of the genus, Vigna. Genetic resistance to bruchids was previously identified in a wild mungbean relative, TC1966. To analyze the underlying genetics, accelerate breeding, and provide a basis for map-based cloning of this gene, we have mapped the TC1966 bruchid resistance gene using restriction fragment length polymorphism (RFLP) markers. Fifty-eight F₂ progeny from a cross between TC1966 and a susceptible mungbean cultivar were analyzed with 153 RFLP markers. Resistance mapped to a single locus on linkage group VIII, approximately 3.6 centimorgans from the nearest RFLP marker. Because the genome of mungbean is relatively small (estimated to be between 470 and 560 million base pairs), this RFLP marker may be suitable as a starting point for chromosome walking. Based on RFLP analysis, an individual was also identified in the F₂ population that retained the bruchid resistance gene within a tightly linked double crossover. This individual will be valuable in developing resistant mungbean lines free of linkage drag.     

Marker enrichment and high-resolution map of the segment of potato chromosome VII harbouring the nematode resistance gene Gro1

The dominant allele Gro1 confers on potato resistance to the root cyst nematode Globodera rostochiensis. The Gro1 locus has been mapped to chromosome VII on the genetic map of potato, using RFLP markers. This makes possible the cloning of Gro1 based on its map position. As part of this strategy we have constructed a high-resolution genetic map of the chromosome segment surrounding Gro1, based on RFLP, RAPD and AFLP markers. RAPD and RFLP markers closely linked to Gro1 were selected by bulked segregant analysis and mapped relative to the Gro1 locus in a segregating population of 1105 plants. Three RFLP and one RAPD marker were found to be inseparable from the Gro1 locus. Two AFLP markers were identified that flanked Gro1 at genetic distances of 0.6 cM and 0.8 cM, respectively. A genetic distance of 1 cM in the Gro1 region corresponds to a physical distance of ca. 100 kb as estimated by long-range restriction analysis. Marker-assisted selection for nematode resistance was accomplished in the course of constructing the high-resolution map. Plants carrying the resistance allele Gro1 could be distinguished from susceptible plants by marker assays based on the polymerase chain reaction (PCR).     

Development of a new transformation-competent artificial chromosome (TAC) vector and construction of tomato and rice TAC libraries

Recent research has shown that BIBAC (binary bacterial artificial chromosome) and TAC (transformation-competent artificial chromosome) vector systems are very useful tools for map-based cloning of agronomically important genes in plant species. We have developed a new TAC vector that is suitable for both dicot and monocot transformation. Using this new TAC vector, we constructed large-insert genomic libraries of tomato and rice. The tomato library contains 96,996 clones (28.3-38.5 kb insert size) and has 3.18 haploid genome equivalents. The rice TAC library has 32.7 kb average insert size and has 9.24 haploid genome equivalents. The quality of these two libraries was tested using PCR to verify genome coverage. Individual clones were characterized to confirm insert integrity by Southern analysis, end sequencing and genetic mapping. To investigate the potential application of these TAC libraries in map-based cloning, TAC constructs containing a 45 kb fragment were introduced into the rice genome via Agrobacterium-mediated transformation. Molecular analysis indicates that the 45 kb fragment was successfully transferred into the rice genome. Although rearrangements of the introduced DNA were detected, 50% of regenerated plants contained at least one intact copy of the 45 kb clone and associated vector sequences. These libraries provide us with a valuable resource to rapidly isolate important genes in tomato and rice.