Sol–gel synthesis and luminescence property of Sr4Al2O7:Re3+,R+ (Re = Eu and Dy; R = Li,Na and K) phosphors for white LEDs

Sr₄Al₂O₇:Eu³⁺ and Sr₄Al₂O₇:Dy³⁺ phosphors with alkali metal substitution were prepared using a sol–gel method. The effects of a charge compensator R on the structure and luminescence of Sr₄Al₂O₇:Re³⁺,R⁺ (Re = Eu and Dy; R = Li, Na and K) phosphors were investigated in detail. Upon heating to 1400°C, the structure of the prepared samples was that of the standard phase of Sr₄Al₂O₇. Under ultraviolet excitation, all Sr₄Al₂O₇:Eu³⁺,R⁺ samples exhibited several narrow emission peaks ranging from 550 to 700 nm due to the 4f → 4f transition of Eu³⁺ ions. All Sr₄Al₂O₇:Dy³⁺,R⁺ phosphors showed two emission peaks at 492 and 582 nm, due to the ⁴F_9/2 → ⁶H_15/2 and ⁴F_9/2 → ⁶H_13/2 transitions of Dy³⁺ ions, respectively. The luminescence intensity of Sr₄Al₂O₇:Re³⁺,R⁺ (Re = Eu and Dy; R = Li, Na and K) phosphors improved markedly upon the addition of charge compensators, promoting their application in white light‐emitting diodes with a near‐ultraviolet chip.     

Tunable white light emission from single‐phased Li2SrSiO4:Dy3+ phosphors by co‐doping with Eu3+

A series of single‐phase full‐color emitting Li₂Sr_1−x−ySiO₄:xDy³⁺,yEu³⁺ phosphors were synthesized by solid‐state reaction and characterized by X‐ray diffraction and photoluminescence analyses. The samples showed emission peaks at 488 nm (blue), 572 nm (yellow), 592 nm (orange) and 617 nm (red) under 393 nm excitation. The photoluminescence excitation spectra, comprising the Eu–O charge transfer band and 4f–4f transition bands of Dy³⁺ and Eu³⁺, range from 200 to 500 nm. The Commission Internationale de I'Eclairage chromaticity coordinates for Li₂Sr_0.98−xSiO₄:0.02Dy³⁺,xEu³⁺ phosphors were simulated. By manipulating Eu³⁺ and Dy³⁺ concentrations, the color points of Li₂Sr_1−x−ySiO₄:xDy³⁺,yEu³⁺ were tuned from the greenish‐white region to white light and eventually to reddish‐white region, demonstrating that a tunable white light can be obtained by Li₂Sr_1−x−ySiO₄:xDy³⁺,yEu³⁺ phosphors. Li₂Sr_0.98−xSiO₄:0.02Dy³⁺, xEu³⁺ can serve as a white‐light‐emitting phosphor for phosphor‐converted light‐emitting diode. Copyright © 2014 John Wiley & Sons, Ltd.     

Luminescence in Li3Al2(PO4)3:Eu2+

A series of efficient Li₃Al₂(PO₄)₃:Eu²⁺ novel phosphors were synthesized by the facile combustion method. The effects of dopant on the luminescence behavior of Li₃Al₂(PO₄)₃ phosphor were also investigated. The phosphors were characterized by X‐ray diffraction, field emission scanning electron microscope and photoluminescence techniques. The result shows that all samples can be excited efficiently by near‐ultraviolet excitation under 310 nm. The emission was observed for Li₃Al₂(PO₄)₃:Eu²⁺ phosphor at 425 nm, which corresponded to the d → f transition. The concentration quenching of Eu²⁺ was observed in Li₃Al₂(PO₄)₃:Eu²⁺ when the Eu concentration was at 0.5 mol%. The prepared powders exhibited intense blue emission at the 425 nm owing to the Eu²⁺ ion by Hg‐free excitation at 310 nm (i.e., solid‐state lighting excitation). Consequently, the availability of such a phosphor will significantly help in the development of blue‐emitting solid‐state lighting applications. Copyright © 2012 John Wiley & Sons, Ltd.     

Orange light‐emitting Ca3Mg3(PO4)4:Sm3+ phosphors

This work reports the photoluminescence properties of Ca₃Mg₃(PO₄)₄:Sm³⁺ phosphors that were synthesized by the combustion method. The phase formation and morphology of the prepared phosphors were analysed by X‐ray diffraction studies and scanning electron microscopy. Ca₃Mg₃(PO₄)₄:Sm³⁺ phosphors give orange light emission when excited by near‐ultraviolet (NUV) and blue light. The photoluminescence characteristics of the as‐prepared phosphors were investigated and their emission spectra showed three peaks due to ⁴G_5/2 → ⁶H_5/2, ⁴G_5/2 → ⁶H_7/2 and ⁴G_5/2 → ⁶H_9/2 transitions. The mechanism responsible for the concentration quenching of luminescence was found to be an electric dipole–dipole interaction. The CIE chromaticity coordinates suggested that the prepared phosphors are potential candidates for orange light‐emitting diodes (LEDs).     

Resonant and non‐resonant energy transfer from Ce3+ → X (X = Tb3+, Eu3+ or Dy3+) in NaMgSO4F material

An inorganic NaMgSO₄F fluoride material was prepared by the wet chemical method and studied for its photoluminescence (PL) and resonant–non‐resonant energy transfer (RET and NORET) capabilities between Ce³⁺ → Tb³⁺, Ce³⁺ → Eu³⁺ and Ce³⁺ → Dy³⁺ rare earth ions. The Tb³⁺ emission for Ce³⁺ → Tb³⁺ transfers under ultraviolet (UV) wavelengths peaked at 491, 547, and 586 nm, for excitation at 308 nm due to ⁵D₄ → ⁷F_J (J = 4, 5, 6) transitions. Eu emission spectra were observed at 440 nm (Eu²⁺), 593 nm and 616 nm (Eu³⁺) recorded for different concentrations of materials, whereas Dy³⁺ emission from Ce³⁺ → Dy³⁺ transfer under UV wavelengths peaked at 485 nm and 577 nm due to ⁴F_9/2 → ⁶H_15/2 and ⁶H_13/2 transitions. The purpose of the present study is to understand the RET and NORET effects of Tb³⁺, Eu³⁺ and Dy³⁺ co‐doping in a NaMgSO₄F:Ce³⁺ luminescent material, which could be used as a green‐emitting material for lamp phosphors.     

Sr2ZnWO6:Eu3+,Bi3+,Li+: a potential white‐emitting phosphor for near‐ultraviolet white light‐emitting diodes

A series of Sr₂ZnWO₆ phosphors co‐doped with Eu³⁺, Bi³⁺ and Li⁺ were prepared using the Pechini method. The samples were tested using X‐ray diffraction and luminescence spectroscopy. The results show that the samples can be effectively excited by near‐ultraviolet (UV) and UV light. The introduction of Bi³⁺ and Li⁺ significantly enhances the fluorescence emission of Sr₂ZnWO₆:Eu³⁺ and changes the light emitted by the phosphors from bluish‐green to white. When excited at 371 nm, Sr_2–x–zZn_1–yWO₆:xEu³⁺,yBi³⁺,zLi⁺ (x = 0.05, y = 0.05, z = 0.05, 0.1 and 0.15) samples emit high‐performance white light. Intense red–orange emission is also observed when excited by UV light. The obtained phosphor is a potential white‐emitting phosphor that could meet the needs of excitation sources with near‐UV chips. In addition, this phosphor might have promising application as a red–orange emitting phosphor for white light‐emitting diodes based on UV light‐emitting diodes. Copyright © 2015 John Wiley & Sons, Ltd.     

Luminescent properties of novel red‐emitting M7Sn(PO4)6:Eu3+ (M = Sr,Ba) for light‐emitting diodes

Novel red‐emitting phosphors, Eu³⁺‐activated M₇Sn(PO₄)₆ (M = Sr, Ba), were synthesized at 1200°C by conventional solid‐state reaction method. The luminescent properties of M₇Sn(PO₄)₆:Eu³⁺ (M = Sr, Ba) phosphors were investigated, and the critical concentration of the activator (Eu³⁺) concentration were found to be 0.175 mol and 0.21 mol per formula unit for Sr_7‐xSn(PO₄)₆:xEu³⁺ and Ba_7‐xSn(PO₄)₆:xEu³⁺, respectively. These phosphors presented red luminescence under the excitation of 395 or 465 nm, perfectly matching with the emissions wavelength of near‐ultraviolet (UV) light‐emitting diodes (LEDs) and InGaN blue LED.     

Nd3+‐Yb3+/Nd3+‐Yb3+‐Li+ co‐doped Gd2O3 phosphors for up and down conversion luminescence

Frequency up‐conversion (UC) emission from the Nd³⁺‐Yb³⁺/Nd³⁺‐Yb³⁺‐Li⁺ co‐doped gadolinium oxide (Gd₂O₃) phosphors prepared by the solution combustion technique in the visible range have been studied by using 980 nm near infrared (NIR) laser diode excitation. The crystalline structure and formation of the cubic phase has been confirmed with the help of X‐ray diffraction (XRD) studies. XRD peak shifts have been found towards the lower diffraction angle side in the case of the Nd³⁺‐Yb³⁺‐Li⁺ co‐doped phosphors. Surface morphology and particle size information have been observed by using field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) analysis. Down‐conversion emission study under 351 nm excitation in the visible region for the Nd³⁺‐Yb³⁺/Nd³⁺‐Yb³⁺‐Li⁺ co‐doped phosphors has been performed. The UC emission bands lying in the green and red region arising from the Nd³⁺ ions have been enhanced by ~260 times, ~113 times due to incorporation of Li⁺ ions in the Nd³⁺‐Yb³⁺ co‐doped phosphors. Photometric characterization has been done for the Nd³⁺‐Yb³⁺/Nd³⁺‐Yb³⁺‐Li⁺ co‐doped phosphors. The present study suggests the capability of the synthesized phosphors in near‐infrared (NIR) to visible upconverter and luminescent device applications.     

The luminescence properties of Sr2–1.5x−1.5yP2O7:xDy3+,yCe3+ phosphor for near‐UV‐based white LEDs synthesized by a chemical co‐precipitation method

A series of Sr₂P₂O₇:Dy³⁺, Sr₂P₂O₇:Ce³⁺ and Sr₂P₂O₇:Dy³⁺,Ce³⁺ phosphors was synthesized via the one‐step calcination process for the precursors prepared by co‐precipitation methods. The phases, morphology, quantum efficiency and photoluminescence properties of the obtained phosphors were characterized systematically. These results show that the near‐spherical particles prepared through calcining the precursors by means of ammonium dibasic phosphate co‐precipitation (method 3) have the smallest particle size and strongest emission intensity among the three methods in the paper. With Dy³⁺ concentration increasing in Sr₂P₂O₇:Dy³⁺ phosphors, the luminescence intensity first increases, reaches maximum, and then decreases. A similar trend was followed by Sr₂P₂O₇:Ce³⁺ with Ce³⁺concentration increasing. A successful attempt was made to initiate the energy transfer mechanism from Ce³⁺ to Dy³⁺ in the host lattice and an overlap between the emission band of Ce³⁺ and the excitation band of Dy³⁺ indicated that the Ce³⁺ → Dy³⁺ energy transfer may indeed exist. It is clear that the photoluminescence intensity of Dy³⁺ as well as the quantum efficiency of the phosphor can be enhanced markedly by co‐doping Ce³⁺. Sr₂P₂O₇:Dy³⁺,Ce³⁺ has its (CIE) chromaticity coordinates in the bluish‐white‐light region, near the standard illuminant D₆₅. The CIE 1913 chromaticity coordinates of Sr₂P₂O₇:Dy³⁺ phosphors fall in the white‐light region, and are adjacent to the ideal white‐light coordinates. In addition, the colour temperature and colour tone of Sr₂P₂O₇:Dy³⁺ could be adjusted by changing the relative concentration of Dy³⁺. In short, Sr₂P₂O₇:Dy³⁺ can be a promising single‐phased white‐light emitting phosphor for near‐UV (NUV) w‐LEDs.     

Optical analysis of Sr3Gd(PO4)3:Pr3+ phosphors for lighting applications

A series of praseodymium (Pr³⁺) ion activated Sr₃Gd_(1−x)(PO₄)₃:xPr³⁺ (0 ≤ x ≤ 2.0 mol%) phosphors were prepared and their structural, compositional and luminescence properties were investigated. The X-ray diffraction profiles indicate that the studied phosphors crystallized into body centred cubic structure and the Pr³⁺ ions have no influence on Sr₃Gd(PO₄)₃ phase. The high-resolution scanning electron microscopy images show the agglomeration of particles that are inter-connected and form irregular shape Sr₃Gd(PO₄)₃ structures. The excitation transitions corresponding to Pr³⁺:³H₄ → ³P_2,1,0 transitions at 445, 471 and 483 nm, respectively, matched well with the emission of blue-light-emitting diode (LED) chip. The emission spectra show strong reddish-orange luminescence through ¹D₂ → ³H₄ transition when excited at 445 nm blue wavelength. The synthesized phosphors have the potential to be used as reddish-orange lighting devices.     

Luminescence in Li2Sr2Al2PO4F9:Dy3+ ‐ a novel nanophosphor

Earlier research has revealed numerous advantages of the wet chemical method in reaction acceleration, yield improvement, enhanced photoluminescence properties and the evolution of new material phases. In the present study the novel nanophosphor Li₂Sr₂Al₂PO₄F₉:Dy³⁺ was synthesized by a one‐step wet chemical method. Formation of single‐phase compounds was confirmed by X‐ray diffraction (XRD) and characterized by photoluminescence (PL) and transmission electron microscopy (TEM) techniques. The average diameter of the particles was calculated from the TEM image as ca. 20 nm. The synthesized nanophosphor exhibited intense blue and yellow emissions at 482 and 575 nm, respectively, owing to the Dy³⁺ ion, by Hg‐free excitation at 387 nm, i.e. solid‐state lighting excitation. The results obtained showed that phosphors have the potential for applications in the lamp industry. Copyright © 2011 John Wiley & Sons, Ltd.     

Dy3+‐, Sm3+‐, Ce3+‐ and Tb3+‐activated optical properties of microcrystalline BaMgP2O7 phosphors

Photoluminescence (PL) and thermoluminescence (TL) properties of rare earth (RE) ion (RE = Dy³⁺, Sm³⁺, Ce³⁺, Tb³⁺) activated microcrystalline BaMgP₂O₇ phosphors are presented in this work. Non‐doped and doped samples of BaMgP₂O₇ were prepared using a solid state diffusion method and characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), PL and TL. The XRD measurement confirmed the phase purity of the BaMgP₂O₇ host matrix. The average particle size was found through SEM measurement to be around 2 μm. All activators using the PL technique displayed characteristic excitation and emission spectra that corresponded to their typical f → f and f → d transitions respectively. Thermoluminescence measurements showed that BaMgP₂O₇:RE (RE = Dy³⁺, Sm³⁺, Tb³⁺, Ce³⁺) and co‐doped BaMgP₂O₇:Ce³⁺,Tb³⁺ phosphors have also TL behaviour.     

Photoluminescence and thermoluminescence properties of Eu2+ doped and Eu2+,Dy3+ co‐doped Ba2MgSi2O7 phosphors

In this work, we report the preparation, characterization, comparison and luminescence mechanisms of Eu²⁺‐doped and Eu²⁺,Dy³⁺‐co‐doped Ba₂MgSi₂O₇ (BMSO) phosphors. Prepared phosphors were synthesized via a high temperature solid‐state reaction method. All prepared phosphors appeared white. The phase structure, particle size, and elemental analysis were analyzed using X‐ray diffraction (XRD), transmission electron microscopy (TEM) and energy‐dispersive X‐ray (EDX) analysis. The luminescence properties of the phosphors were investigated by thermoluminescence (TL) and photoluminescence (PL). The PL excitation and emission spectra of Ba₂MgSi₂O₇:Eu²⁺ showed the peak to be around 381 nm and 490 nm respectively. The PL excitation spectrum of Ba₂MgSi₂O₇:Eu²⁺Dy³⁺ showed the peak to be around 341 nm and 388 nm, and the emission spectrum had a broad band around 488 nm. These emissions originated from the 4f⁶ 5d¹ to 4f⁷ transition of Eu²⁺. TL analysis revealed that the maximum TL intensity was found at 5 mol% of Eu²⁺ doping in Ba₂MgSi₂O₇ phosphors after 15 min of ultraviolet (UV) light exposure. TL intensity was increased when Dy³⁺ ions were co‐doped in Ba₂MgSi₂O₇:Eu²⁺ and maximum TL intensity was observed for 2 mol% of Dy³⁺. TL emission spectra of Ba_1.95MgSi₂O₇:0.05Eu²⁺ and Ba_1.93MgSi₂O₇:0.05Eu²⁺,0.02Dy³⁺ phosphors were found at 500 nm. TL intensity increased with UV exposure time up to 15 min, then decreased for the higher UV radiation dose for both Eu doping and Eu,Dy co‐doping. The trap depths were calculated to be 0.54 eV for Ba_1.95MgSi₂O₇:0.05Eu²⁺ and 0.54 eV and 0.75 eV for Ba_1.93MgSi₂O₇:0.05Eu²⁺,0.02Dy³⁺ phosphors. It was observed that co‐doping with small amounts of Dy³⁺ enhanced the thermoluminescence properties of Ba₂MgSi₂O₇ phosphor. Copyright © 2016 John Wiley & Sons, Ltd. [Correction added on 5 April 2016, after first online publication: The following parts of the abstract have been edited for consistency. '4f65d1' has been corrected to '4f⁶ 5d¹', '4f7' has been corrected to '4f⁷', 'Ba1.95' has been corrected to 'Ba_1.95' and 'Ba1.93' has been corrected to 'Ba_1.93' respectively.]     

The luminescent properties and crystal structure of Sr(1.5‐x)‐(1.5y)Mg0.5SiO4:xEu2+,yCe3+ blue phosphor synthesized by co‐precipitation method

In order to improve the luminescent performance of silicate blue phosphors, Sr_{(1.5‐x)‐(1.5y)}Mg_0.5SiO₄:xEu²⁺,yCe³⁺ phosphors were synthesized using one‐step calcination of a precursor prepared by chemical co‐precipitation. The crystal structure and luminescent properties of the phosphors were analyzed using X‐ray diffraction and fluorescence spectrophotometry, respectively. Because the activated ions (Eu²⁺) can occupy two different types of sites (Sr₁ and Sr₂), the emission spectrum of Eu²⁺ excited at 350 nm contains two single bands (EM₁ and EM₂) in the wavelength range 400–550 nm, centered at 463 nm, and the emission intensity first increases and then decreases with increasing concentrations of Eu²⁺ ions. Co‐doping of Ce³⁺ ions can greatly enhance the emission intensity of Eu²⁺ by transferring its excitation energy to Eu²⁺. Because of concentration quenching, a higher substitution concentration of Ce³⁺ can lead to a decrease in the intensity. Meanwhile, the quantum efficiency of the phosphor is improved after doping with Ce³⁺, and a blue shift phenomenon is observed in the CIE chromaticity diagram. The results indicate that Sr_{(1.5‐x)‐(1.5y)}Mg_0.5SiO₄:xEu²⁺,yCe³⁺ can be used as a potential new blue phosphor for white light‐emitting diodes.     

Spectroscopic and photoluminescence characterization of Dy3+ in Sr0.5Ca0.5TiO3 phosphor

The spectroscopic and photoluminescence characteristics of trivalent dysprosium (Dy³⁺)‐doped Sr_0.5Ca_0.5TiO₃ phosphor materials synthesized via solid‐state reaction method were studied. The X‐ray diffraction profile confirmed the orthorhombic perovskite structure of the prepared samples. Judd–Ofelt analysis was carried out to obtain the intensity parameters and predicted radiative properties of Sr_0.5Ca_0.5TiO₃:2wt%Dy³⁺. The photoluminescence spectrum of Dy³⁺‐doped Sr_0.5Ca_0.5TiO₃ showed three emission peaks at 481, 574 and 638 nm corresponding to ⁴F_9/2→⁶H_15/2, ⁴F_9/2→⁶H_13/2 and ⁴F_9/2→⁶H_11/2 transitions respectively. The variation of luminescence intensity with different excitation wavelengths and Dy³⁺ concentrations is discussed. The decay profiles of ⁴F_9/2 excited levels of Dy³⁺ ions show bi‐exponential behaviour and also a decrease in average lifetime with increase in Dy³⁺ concentration. Yellow to blue luminescence intensity ratio, CIE chromaticity co‐ordinates and correlated color temperature were also calculated for different concentrations of Dy³⁺‐doped Sr_0.5Ca_0.5TiO₃ phosphor at different λ_ex. Copyright © 2015 John Wiley & Sons, Ltd.     

Photoluminescence properties and energy transfer in Ce3+/Dy3+ co‐doped Sr3MgSi2O8 phosphors for potential application in ultraviolet white light‐emitting diodes

Sr₃MgSi₂O₈:Ce³⁺, Dy³⁺ phosphors were prepared by a solid‐state reaction technique and the photoluminescence properties were investigated. The emission spectra show not only a band due to Ce³⁺ ions (403 nm) but also as a band due to Dy³⁺ ions (480, 575 nm) (UV light excitation). The photoluminescence properties reveal that effective energy transfer occurs in Ce³⁺/Dy³⁺ co‐doped Sr₃MgSi₂O₈ phosphors, and the co‐doping of Ce³⁺ could enhance the emission intensity of Dy³⁺ to a certain extent by transferring its energy to Dy³⁺. The Ce³⁺/Dy³⁺ energy transfer was investigated by emission/excitation spectra, and photoluminescence decay behaviors. In Sr_2.94MgSi₂O₈:0.01Ce³⁺, 0.05Dy³⁺ phosphors, the fluorescence lifetime of Dy³⁺ (from 3.35 to 27.59 ns) is increased whereas that of Ce³⁺ is greatly decreased (from 43.59 to 13.55 ns), and this provides indirect evidence of the Ce³⁺ to Dy³⁺ energy transfer. The varied emitted color of Sr₃MgSi₂O₈:Ce³⁺, Dy³⁺ phosphors from blue to white were achieved by altering the concentration ratio of Ce³⁺ and Dy³⁺. These results indicate Sr₃MgSi₂O₈:Ce³⁺, Dy³⁺ may be as a candidate phosphor for white light‐emitting diodes. Copyright © 2012 John Wiley & Sons, Ltd.     

Enhancement of the photoluminescence and long afterglow properties of Sr2MgSi2O7:Eu2+ phosphor by Dy3+ co‐doping

Sr₂MgSi₂O₇:Eu²⁺ and Sr₂MgSi₂O₇:Eu²⁺,Dy³⁺ long afterglow phosphors were synthesized under a weak reducing atmosphere by the traditional high temperature solid state reaction method. The synthesized phosphors were characterized by powder X‐ray diffraction (XRD), energy dispersive X‐ray spectroscopy (EDX), and photo‐, thermo‐ and mechanoluminescence spectroscopic techniques. The phase structure of the sintered phosphor was an akermanite type structure, which belongs to tetragonal crystallography. The thermoluminescence properties of these phosphors were investigated and compared. Under ultraviolet light excitation, the emission spectra of both prepared phosphors were composed of a broad emission band peaking at 470 nm. When the Sr₂MgSi₂O₇:Eu²⁺ phosphor was co‐doped with Dy³⁺, the photoluminescence (PL), afterglow and mechanoluminescence (ML) intensity were strongly enhanced. The decay graph indicated that both the sintered phosphors contained fast decay and slow decay processes. The ML intensities of Sr₂MgSi₂O₇:Eu²⁺ and Sr₂MgSi₂O₇:Eu²⁺,Dy³⁺ phosphors were increased proportionally with increasing impact velocity, a finding that suggests that these phosphors could be used as sensors to detect the stress of an object. Copyright © 2015 John Wiley & Sons, Ltd.     

Combustion synthesis of Na2Sr(PO4)F:Dy3+ white light emitting phosphor

The synthesis, X‐ray diffraction, photoluminescence, TGA/DTA and FTIR techniques in Dy³⁺ activated Na₂Sr(PO₄)F phosphor are reported in this paper. The prepared phosphor gave blue, yellow and red emission in the visible region of the spectrum at 348 nm excitation. CIE color co‐ordinates of Na₂Sr(PO₄)F:Dy³⁺ are suitable as white light‐emitting phosphors. Copyright © 2009 John Wiley & Sons, Ltd.     

Enhanced luminescence and white light emission from Eu3+‐co‐doped K3Ca2(SO4)3Cl:Dy3+ phosphor with near visible ultraviolet excitation for white LEDs

The luminescent properties of europium (Eu)‐ and dysprosium (Dy)‐co‐doped K₃Ca₂(SO₄)₃Cl halosulfate phosphors were analyzed. This paper reports the photoluminescence (PL) properties of K₃Ca₂(SO₄)₃Cl microphosphor doped with Eu and Dy and synthesized using a cost‐effective wet chemical method. The phosphors were characterized by X‐ray diffraction and scanning electron microscopy. The CIE coordinates were calculated to display the color of the phosphor. PL emission of the prepared samples show peaks at 484 nm (blue), 575 nm (yellow), 594 nm (orange) and 617 nm (red). The emission color of the Eu,Dy‐co‐doped K₃Ca₂(SO₄)₃Cl halophosphor depends on the doping concentration and excitation wavelength. The addition of Eu in K₃Ca₂(SO₄)₃Cl:Dy greatly enhances the intensity of the blue and yellow peaks, which corresponds to the ⁴ F_9/2 → ⁶H_15/2 and ⁴ F_9/2 → ⁶H_13/2 transitions of Dy³⁺ ions (under 351 nm excitation). The Eu³⁺/Dy³⁺ co‐doping also produces white light emission for 1 mol% of Eu³⁺, 1 mol% of Dy³⁺ in the K₃Ca₂(SO₄)₃Cl lattice under 396 nm excitation, for which the calculated chromaticity coordinates are (0.35, 0.31). Thus, K₃Ca₂(SO₄)₃Cl co‐doped with Eu/Dy is a suitable candidate for NUV based white light‐emitting phosphors technology. Copyright © 2014 John Wiley & Sons, Ltd.     

Photoluminescence properties of Ca2Al2O5:RE3+ (RE = Eu,Dy and Tb) phosphors for solid state lighting

Ca₂Al₂O₅:Eu³⁺, Ca₂Al₂O₅:Dy³⁺ and Ca₂Al₂O₅:Tb³⁺ phosphors were synthesized using a combustion synthesis method. The prepared phosphors were characterized by X‐ray powder diffraction for phase purity, by scanning electron microscopy for morphology, and by photoluminescence for emission and excitation measurements. The Ca₂Al₂O₅:Eu³⁺ phosphors could be efficiently excited at 396 nm and showed red emission at 594 nm and 616 nm due to ⁵D₀ → ⁷F₁ and ⁵D₀ → ⁷F₂ transitions. Dy³⁺‐doped phosphors showed blue emission at 482 nm and yellow emission at 573 nm. Ca₂Al₂O₅:Tb³⁺ phosphors showed emission at 545 nm when excited at 352 nm. Concentration quenching occurred in both Eu³⁺ and Dy³⁺phosphors at 0.5 mol%. Photoluminescence results suggested that the aluminate‐based phosphor could be a potential candidate for application in environmentally friendly based lighting technologies.