Plasmids pEMBLY: new single-stranded shuttle vectors for the recovery and analysis of yeast DNA sequences

We describe the construction and properties of pEMBLY plasmids. They belong to a new family of yeast shuttle vectors which are derived from plasmid vector pEMBL9 and offer the following improvement: relatively small size; large number of cloning sites; screening for insert-containing plasmids on indicator plates; different combinations of genes which complement auxotrophic deficiencies and sequences that support DNA replication in Saccharomyces cerevisiae; and ability to isolate the plasmid DNA in single-stranded (ss) form. The yeast S. cerevisiae can be efficiently transformed by these plasmids in both the ss and double-stranded (ds) forms. Finally, the presence of the phage f1 intergenic region allows one to obtain the cloned sequences in the ss form upon infection with the wild-type ss phage [Dotto et al., Virology 114 (1981) 463-473].     

A plasmid cloning system utilizing replication and packaging functions of the filamentous bacteriophage fd

DNA cloning vectors were developed which utilize the replication origin (ori) of bacteriophage fd for their propagation. These vectors depend on the expression of viral gene 2 that was inserted into phage lambda, which in turn was integrated into the host genome. The constitutive expression of gene 2 in the host cells is sufficient for the propagation of at least 100 pfd plasmids per cell. In addition to the fd ori, the pfd vectors carry various antibiotic-resistance genes and unique restriction sites. Some of these vectors have no homologies to commonly used pBR plasmids or to lambda DNA. The nucleotide sequence of the vectors can be deduced from published sequences. Large DNA inserts can be stably propagated in pfd vectors; these are more stable than similar DNA fragments cloned in intact genomes of filamentous bacteriophage. Inclusion of phage sequences required for efficient phage packaging and infection with a helper phage resulted in formation of phage particles containing single-stranded plasmid genomes. Growth at 42 degrees C without selective pressure results in loss of pfd plasmids.     

Cloning vectors that yield high levels of single-stranded DNA for rapid DNA sequencing

We have constructed chimeric plasmid vectors with the origin and intergenic region from M13 phage cloned into the PvuII ( pZ145 ) and AhaIII ( pZ150 , pZ152 ) sites of pBR322. In the absence of M13 phage, these plasmids replicate like any other ColE1-derived plasmid and confer both ampicillin and tetracycline resistance (Amp, Tet). Upon infection with M13 phage, the viral origin present on the plasmids permits phage-directed plasmid replication and results in high yields of single-stranded (ss) plasmid DNA in M13-like particles. This ssDNA, which represents only one of the plasmid strands, is useful as a substrate for rapid DNA sequence determination by the dideoxy sequencing method described by Sanger et al. (1977). Since these plasmids contain an intact pBR322, the intergenic region can be transferred onto most pBR322 derivatives to yield ss plasmid DNA without affecting the recipient plasmid for further studies. We also constructed a deletion derivative of pZ145 , plasmid pZ146 , that does not exhibit interference with the growth of the M13 helper, although this plasmid is encapsidated into phage particles. This result confirms the theory that the intergenic region consists of two domains: one domain being a segment involved in phage morphogenesis and the other being a region of functional origin which interferes with M13 replication.     

A simple vector modification to facilitate oligonucleotide-directed mutagenesis.

We describe a simple modification of commonly used single-stranded cloning vectors that permits the efficient recovery of mutant DNA molecules in oligonucleotide-directed mutagenesis experiments, even when the absolute efficiency of mutagenesis is very low. The modification consists of the insertion of a short synthetic DNA fragment into the vector's polylinker and permits the identification of mutant clones based on a standard chromogenic plate assay for bacterial colonies or phage plaques producing functional beta-galactosidase. Other useful properties of the original vector are retained in the modified version. In vitro mutagenesis reactions are carried out with two oligonucleotides, one to introduce the mutation of interest, and the second to correct a frameshift mutation introduced into the beta-galactosidase gene of the modified vector. We have found that these two sequence changes are closely linked following transformation of an appropriate E. coli strain with the products of the in vitro mutagenesis reaction, and have thereby recovered desired mutations at a frequency of about 50% even when the overall mutagenesis efficiency is less than 1%. By alternately correcting and re-introducing the beta-galactosidase frameshift mutation, we have shown that multiple rounds of mutagenesis can be carried out on the same template with a high efficiency of mutant recovery in each step. Modifications similar or identical to those we describe here should be feasible for most commonly used single-stranded cloning vectors and should increase the usefulness of these vectors by providing an additional option for oligonucleotide-directed mutagenesis to be used in conjunction with or in lieu of other commonly used approaches.     

Site-directed mutagenesis of the binding site for ribosomal protein S8 within 16S ribosomal RNA from Escherichia coli.

Twelve specific alterations have been introduced into the binding site for ribosomal protein S8 in Escherichia coli 16S rRNA. Appropriate rDNA segments were first cloned into bacteriophage M13 vectors and subjected to bisulfite and oligonucleotide-directed mutagenesis in vitro. Subsequently, the mutagenized sequences were placed within the rrnB operon of plasmid pNO1301 and the mutant plasmids were used to transform E. coli recipients. The growth rates of cells containing the mutant plasmids were determined and compared with that of cells containing the wild-type plasmid. Only those mutations which occurred at highly conserved positions, or were expected to disrupt the secondary structure of the binding site, increased the doubling time appreciably. The most striking changes in growth rate resulted from mutations that altered a small internal loop within the S8 binding site. This structure is phylogenetically conserved in prokaryotic 16S rRNAs and may play a direct role in S8-16S rRNA recognition and interaction.     

A Bacillus subtilis plasmid that can be packaged as single-stranded DNA in Escherichia coli: use for oligodeoxynucleotide-directed mutagenesis

A Bacillus subtilis/Escherichia coli shuttle vector was modified to contain the origin of DNA replication of the E. coli filamentous phage f1, in both orientations. Upon superinfection with and f1-related phage of an E. coli strain containing either of the modified vectors, the single-stranded (ss) form of the plasmid was packaged in virions and released to the culture medium. Each of these ss DNAs has been purified from the virions and used as a template for oligodeoxynucleotide-directed mutagenesis. The resulting mutations were demonstrated by DNA sequencing. The capacity of these vectors to be isolated as phage ss DNA from E. coli and to replicate as plasmids in B. subtilis makes them convenient substrates for the production of oligodeoxynucleotide-directed mutations for studies in B. subtilis.     

Insertional gene synthesis, a novel method of assembling consecutive DNA sequences within specific sites in plasmids. Construction of the HIV-1 tat gene.

The construction of the HIV-1 tat gene using a novel method termed insertional gene synthesis (IGS) is described. IGS is used to assemble a gene or any DNA sequence in a stepwise manner within a plasmid containing a single stranded DNA phage origin of replication. The IGS method is based upon consecutive targeted insertions of long DNA oligonucleotides (greater than 100 bases) within the plasmid by oligonucleotide-directed mutagenesis. IGS therefore involves synthesis of only a few oligonucleotides corresponding to one strand of a gene. Furthermore, the gene is synthesized directly adjacent to bacterial gene regulatory sequences for direct expression. Using this approach, the 261 bp tat gene was assembled in three successive cycles adjacent to the lac promoter in the pEMBL-derivative, pKH125. The 15 kD tat protein was produced from this synthetic gene in E. coli upon IPTG induction. However, it was necessary to tightly control the expression of tat by including the lac I gene directly within the tat expression vector.     

A modified TnphoA useful for single-stranded DNA sequencing.

The TnphoA transposon constructed by Manoil and Beckwith [Proc. Natl. Acad. Sci. USA 82 (1985) 8129-8133] has been modified to permit easy isolation of single-stranded (ss) DNA of target plasmids. The intergenic region (IG) of filamentous phage f1, which consists of the phage origin of replication and packaging signal, was inserted into a nonessential region of TnphoA. This modified transposon should be useful for the analysis of genes cloned in plasmids that lack a filamentous phage IG. Transposition of TnphoA-IG into a plasmid carries the IG with it; subsequently, after infection with a filamentous helper phage, ss plasmid DNA suitable for sequence analysis and useful for oligodeoxyribonucleotide-mediated mutagenesis of TnphoA-generated fusions can be isolated. The utility of TnphoA-IG was confirmed by analysis of 'blue hops' into the bla (encoding beta-lactamase) and pspE (encoding phage shock protein) genes whose products are secreted into the Escherichia coli periplasm.     

A family of yeast expression vectors containing the phage f1 intergenic region

The construction and characterization of a family of yeast expression vectors is described. They have the following features: plasmid replication and selection (ApR) in Escherichia coli, packaging of single-stranded (ss) DNA upon infection of E. coli with a filamentous helper phage, replication in Saccharomyces cerevisiae based on the 2 mu plasmid origin of replication (ori), selection in yeast by complementation of LEU2 (pVT-L series, size 6.3 kb) or URA3 gene (pVT-U series, size 6.9 kb) and seven unique restriction sites for cloning within an 'expression cassette' which includes the promoter and 3' sequence of the ADH1 gene. The multiple cloning site as well as the ori and intergenic region of the phage f1 have been cloned in two orientations for convenient gene cloning and ssDNA strand selection. As a result any of these eight vectors can be chosen for cloning, expressing genes in yeast, sequencing and mutagenesis without the need for recloning into specialized vectors.     

A phage T4 in vitro packaging system for cloning long DNA molecules.

Recombinant plasmid DNAs containing long DNA inserts that can be propagated in Escherichia coli would be useful in the analysis of complex genomes. We tested a bacteriophage T4 in vitro DNA packaging system that has the capacity to package about 170 kb of DNA into its capsid for cloning long DNA fragments. We first asked whether the T4 in vitro system can package foreign DNA such as concatemerized lambda imm434 DNA and phage P1-pBR322 hybrid DNA. The data suggest that the T4 system can package foreign DNA as efficiently as the mature phage T4 DNA. We then tested the system for its ability to clone foreign DNA fragments using the P1-pBR322 hybrid vectors constructed by Sternberg [Proc. Natl. Acad. Sci. USA 87 (1990) 103-107]. E. coli genomic DNA fragments were ligated with the P1 vectors containing two directly oriented loxP sites, and the ligated DNA was packaged by the T4 in vitro system. The packaged DNA was then transduced into E. coli expressing the phage P1 cyclization recombination protein recombinase to circularize the DNA by recombination between the loxP sites situated at the ends of the transduced DNA molecule. Clones with long DNA inserts were obtained by using this approach, and these were maintained as single-copy plasmids under the control of the P1 plasmid replicon. Clones with up to about 122-kb size inserts were recovered using this approach.     

An improved filamentous helper phage for generating single-stranded plasmid DNA

Gene cloning in plasmid vectors that contain a filamentous phage intergenic region presents several advantages. However, technical difficulties have been a problem, primarily low yields of packaged single stranded (ss) plasmid DNA from the rapid, small scale procedures usually employed, and ambiguities in sequencing reactions attributed to the contamination by helper phage ss DNA. We report here the construction and some properties of a new f1 helper phage. Using this phage, R408, plasmid ss DNA is packaged and exported preferentially over phage ss DNA, and the absolute yield of plasmid ss DNA is usually increased.     

The complete 30-base-pair origin region of bacteriophage phi X174 in a plasmid is both required and sufficient for in vivo rolling-circle DNA replication and packaging

The origin of replication of the isometric single-stranded DNA bacteriophages is located in a specific sequence of 30 nucleotides, the origin region, which is highly conserved in these phage genomes. Plasmids harboring this origin region are subject to rolling-circle DNA replication and packaging of single-stranded (ss) plasmid DNA into phage coats in phi X174 or G4-phage-infected cells. This system was used to study the nucleotide sequence requirements for rolling-circle DNA replication and DNA packaging employing plasmids which contain the first 24, 25, 26, 27, 28 and the complete 30-base-pair (bp) origin region of phi X174. No difference in plasmid ss DNA packaging was observed for plasmids carrying only the 30-bp origin region and plasmids carrying the 30-bp origin region plus surrounding sequences (i.e. plasmids carrying the HaeIII restriction fragment Z6B of phi X174 replicative-form DNA). This indicates that all signals for DNA replication and phage morphogenesis are contained in the 30-bp origin region and that no contribution is made by sequences which immediately surround the origin region in the phi X174 genome. The efficiency of packaging of plasmid ssDNA for plasmids containing deletions in the right part of the origin region decreases drastically when compared with the plasmid containing the complete 30-bp origin region (for a plasmid carrying the first 28 bp of the origin region to approximately 5% and 0.5% in the phi X174 and G4 systems respectively). Previous studies [Fluit, A.C., Baas, P.D., van Boom, J.H., Veeneman, G.H. and Jansz, H.S. (1984) Nucleic Acids Res. 12, 6443--6454] have shown that the presence of the first 27 bp of the origin region is necessary as well as sufficient for cleavage of the viral strand in the origin region by phi X174 gene A protein. Moreover, Brown et al. [Brown, D.R., Schmidt-Glenewinkel, T., Reinberg, D. and Hurwitz, J. (1983) J. Biol. Chem. 258, 8402--8412] have shown that omission of the last 2 bp of the origin region does not interfere with phi X174 rolling-circle DNA replication in vitro. Our results therefore suggest that for optimal phage development in vivo, signals in the origin region are utilized which have not yet been noticed by the in vitro systems for phi X174 phage DNA replication and morphogenesis.     

Analysis of DNA repeats in bacterial plasmids reveals the potential for recurrent instability events

Structural instability has been frequently observed in natural plasmids and vectors used for protein expression or DNA vaccine development. However, there is a lack of information concerning hotspot mapping, namely, DNA repeats or sequences identical to the host genome. This led us to evaluate the abundance and distribution of direct, inverted, and tandem repeats with high recombination potential in 36 natural plasmids from ten bacterial genera, as well as in several widely used bacterial and mammalian expression vectors. In natural plasmids, we observed an overrepresentation of close direct repeats in comparison to inverted ones and a preferential location of repeats with high recombination potential in intergenic regions, suggesting a highly plastic and dynamic behavior. In plasmid vectors, we found a high density of repeats within eukaryotic promoters and non-coding sequences. As a result of this in silico analysis, we detected a spontaneous recombination between two 21-bp direct repeats present in the human cytomegalovirus early enhancer/promoter (huCMV EEP) of the pCIneo plasmid. This finding is of particular importance, as the huCMV EEP is one of the most frequently used regulatory elements in plasmid vectors. Because pDNA integration into host gDNA can have adverse consequences in terms of plasmid processing and host safety, we also mapped several regions with high probability to mediate integration into the Escherichia coli or human genomes. Like repeated regions, some of these were located in non-coding regions of the plasmids, thus being preferential targets to be removed.     

Plasmid pACYC184 contains an ssi signal for initiation of single-strand phage DNA replication

Using the plaque assay system for screening the single-strand (ss) initiation determinant (ssi) sequences, we have found that 119-bp region in pACYC184, a derivative of the plasmid P15A of Escherichia coli, can direct such ss DNA initiation. This region is located downstream from the P15A origin of replication and conserves consensus sequences of the ssi signals found in the other plasmids. Signals for ss DNA initiation are defined as nucleotide sequences present on ss DNA templates and required for priming DNA synthesis. The direction of chain elongation in DNA synthesis is opposite to that of the leading strand. In this region, we found a potential stem-and-loop structure. The 119-bp DNA segment of plasmid pACYC184 cloned in f1R199 filamentous phage could direct rifampicin-resistant conversion of the ss DNA to the double-stranded replicative form.     

Efficient integration of artificial transposons into plasmid targets in vitro: a useful tool for DNA mapping, sequencing and genetic analysis.

We have developed efficient methods for creating artificial transposons and inserting these transposons into plasmid targets in vitro, primarily for the purpose of DNA mapping and sequencing. A novel plasmid has been engineered to convert virtually any DNA sequence, or combination of sequences, into an artificial transposon; hence, custom transposons containing any desired feature can be easily designed and constructed. Such transposons are then efficiently inserted into plasmid targets, in vitro, using the integrase activity present in yeast Ty1 virus-like particles. A single in vitro integration reaction, which resembles a simple restriction digestion in the complexity of the reaction, gives rise to thousands of recoverable insertion events within DNA target molecules; this frequency approaches one insertion per phosphodiester bond in typical plasmids. Importantly, transposon insertions are recovered from all regions of DNA inserts carried on plasmid targets, indicating that integration is a random or nearly-random process. Because of its versatility, this technology offers a generalized method of generating recombinant DNA molecules of a desired structure. We have adapted this system for DNA sequencing by developing a customized artificial transposon to insert new primer binding sites into internal regions of DNA inserts carried on cloning vectors. Transposon insertions have been generated throughout several different yeast and human DNA inserts carried on plasmids, allowing the efficient recovery of sequence information from these inserts. Our results demonstrate the overall utility of this method for both small and large-scale DNA sequencing, as well as general DNA restructuring, and indicate that it could be adapted for use with a number of additional applications including functional genetic analysis.     

A shuttle vector plasmid for studying carcinogen-induced point mutations in mammalian cells

We have constructed a shuttle vector plasmid for studying mutagenesis in mammalian cells. The plasmid replicates in cell lines permissive for SV40 virus as well as in the bacterium Escherichia coli and carries a bacterial suppressor tRNA gene (supF) that can serve as a mutagenesis marker. The plasmid replicates as efficiently as SV40 virus in African Green Monkey kidney CV1 cells, indicating that all traces of the inhibitory sequences normally found in pBR322 and its derivatives have been removed. The design of the plasmid and the small size of the mutagenesis target gene decrease the probability of recovering spontaneous deletion mutations that have been shown to occur at high frequency during passage in mammalian cells. The frequency of spontaneous-mutant plasmids recovered after passage in CV1 cells is substantially lower than with other vectors described previously. When the plasmid DNA is treated with UV radiation before passage in CV1 cells, mutants are observed at a frequency about 20-fold above the spontaneous background.     

Oligodeoxynucleotide-directed cleavage and repair of a single-stranded vector: a method of site-specific mutagenesis

A simple and efficient site-specific mutagenesis method is described. First, a single-stranded (ss) circular vector is linearized at the site where the desired mutation will be introduced. To do this, an oligodeoxynucleotide complementary to the target region of the ss vector and containing a restriction enzyme recognition sequence is annealed to the circular ss vector, and the partial double-strand formed is subsequently cleaved with that enzyme. Then, another oligodeoxynucleotide spanning the nick and carrying the mutation is annealed to the linearized ss DNA template and the annealed mixture is used directly to transform Escherichia coli without prior enzymatic DNA synthesis in vitro. The procedure has been applied successfully to constructing insertion, deletion, and point mutations in both M13 phage vectors and plasmid vectors containing the f1 origin of replication.     

Cloning and expression of the hemagglutinin gene of influenza virus subtype H1 in Escherichia coli

The full-length copy of the hemagglutinin gene of influenza virus was inserted into M13 phage DNA. The DNA sequence coding for the hydrophobic prepeptide was removed from the gene by oligonucleotide-directed mutagenesis. The possibilities of expression of the full-length and mutant genes in E. coli were investigated. The beta-galactosidase-hemagglutinin fusion proteins were isolated. The fusion proteins exhibited specific binding to antiviral antibodies. This binding could be competitively inhibited by excess of viral hemagglutinin, demonstrating that these fusion proteins contained antigenic determinants of hemagglutinin.     

Conversion of pBR322-based plasmids into broad-host-range vectors by using the Tn3 transposition mechanism.

We constructed a series of transposon vectors which allow efficient in vitro gene manipulation and subsequent introduction of cloned DNA into a variety of gram-negative bacteria. Transfer of the cloned fragment from these multicopy plasmids into self-transmissible broad-host-range vectors is achieved in vivo, using the Tn3 transposition mechanism. Transposition into a variety of broad-host-range plasmids proceeds efficiently, and the resulting recombinant plasmids can be readily transferred and maintained in a variety of gram-negative bacteria. The utility of the transposable vectors was demonstrated by the introduction and expression of the lacIPOZY sequences of Escherichia coli into Pseudomonas putida strains, allowing them to utilize lactose as a sole source of carbon and energy.     

T7噬菌体转运真核表达载体入胞表达平台的构建

[目的]构建携带锚定序列的真核表达载体,研究T7噬菌体识别、包裹和转运真核表达载体进入细胞实现蛋白表达的可行性,为DNA疫苗研发建立新的技术平台.[方法]本研究通过重叠延伸PCR方法获得候选锚定序列并插入真核表达载体;建立荧光定量PCR方法比较T7噬菌体识别、包裹真核表达载体的效率;激光共聚焦显微镜观察T7噬菌体转运真...