Propionic acid fermentation of glycerol and glucose by Propionibacterium acidipropionici and Propionibacterium freudenreichii ssp.shermanii

A comparative study was carried out in anaerobic batch cultures on 20 g/l of either glycerol or glucose using two propionibacteria strains, Propionibacterium acidipropionici and Propionibacterium freudenreichii ssp. shermanii. In all cases, fermentation end-products were the same and consisted of propionic acid as the major product, acetic acid as the main by-product and two minor metabolites, n-propanol and succinic acid. Evidence was provided that greater production of propionic acid by propionibacteria was obtained with glycerol as carbon and energy sources. P. acidipropionici showed higher efficiency in glycerol conversion to propionic acid with a faster substrate consumption (0.64 g l⁻¹ h⁻¹) and a higher propionic acid production (0.42 g l⁻¹ h⁻¹ and 0.79 mol/mol). The almost exclusive production of propionic acid from glycerol by this bacterium suggested an homopropionic tendency of this fermentation. Acetic acid final concentration was two times lower on glycerol (2 g/l) than on glucose (4 g/l) for both micro-organisms. P. freudenreichii ssp. shermanii exhibited a glycerol fermentation pattern typical of non-associated glycerol-consumption-product formation. This could indicate a particular metabolism for P. freudenreichii ssp. shermanii oriented towards the production of other specific components. These results tend to show that glycerol could be an excellent alternative to conventional carbon sources such as carbohydrates for propionic acid production. Received: 21 May 1999 / Accepted: 1 November 1999     

Propionic acid fermentation from glycerol: comparison with conventional substrates

Instead of the conventional carbon sources used for propionic acid biosynthesis, the utilization of glycerol is considered here, since the metabolic pathway involved in the conversion of glycerol to propionic acid is redox-neutral and energetic. Three strains, Propionibacterium acidipropionici, Propionibacterium acnes and Clostridium propionicum were tested for their ability to convert glycerol to propionic acid during batch fermentation with initially 20 g/l glycerol. P. acidipropionici showed higher efficiency in terms of fermentation time and conversion yield than did the other strains. The fermentation profile of this bacterium consisted in propionic acid as the major product (0.844 mol/mol), and in minimal by-products: succinic (0.055 mol/mol), acetic (0.023 mol/mol) and formic (0.020 mol/mol) acids and n-propanol (0.036 mol/mol). The overall propionic acid productivity was 0.18 g l⁻¹h⁻¹. A comparative study with glucose and lactic acid as carbon sources showed both less diversity in end-product composition and a 17% and 13% lower propionic acid conversion yield respectively than with glycerol. Increasing the initial glycerol concentration resulted in an enhanced productivity up to 0.36 g l⁻¹h⁻¹ and in a maximal propionic acid concentration of 42 g/l, while a slight decrease of the conversion yield was noticed. Such a propionic acid production rate was similar or higher than the values obtained with lactic acid (0.35 g l⁻¹h⁻¹) or glucose (0.28 g l⁻¹h⁻¹). These results demonstrated that glycerol is a carbon source of interest for propionic acid production. Received: 15 July 1996 / Received revision: 11 November 1996 / Accepted: 11 November 1996     

Propionic acid fermentation by Propionibacterium freudenreichii CCTCC M207015 in a multi-point fibrous-bed bioreactor

Propionic acid was produced in a multi-point fibrous-bed (MFB) bioreactor by Propionibacterium freudenreichii CCTCC M207015. The MFB bioreactor, comprising spiral cotton fiber packed in a modified 7.5-l bioreactor, was effective for cell-immobilized propionic acid production compared with conventional free cell fermentation. Batch fermentations at various glucose concentrations were investigated in the MFB bioreactor. Based on analysis of the time course of production, a fed-batch strategy was applied for propionic acid production. The maximum propionic acid concentration was 67.05 g l⁻¹ after 496 h of fermentation, and the proportion of propionic acid to total organic acids was approximately 78.28% (w/w). The MFB bioreactor exhibited excellent production stability during batch fermentation and the propionic acid productivity remained high after 78 days of fermentation.     

1,3-Propanediol production in a two-step process fermentation from renewable feedstock

In this work, the production of 1,3-propanediol from glucose and molasses was studied in a two-step process using two recombinant microorganisms. The first step of the process is the conversion of glucose or other sugar into glycerol by the metabolic engineered Saccharomyces cerevisiae strain HC42 adapted to high (>200 g l⁻¹) glucose concentrations. The second step, carried out in the same bioreactor, was performed by the engineered strain Clostridium acetobutylicum DG1 (pSPD5) that converts glycerol to 1,3-propanediol. This two-step strategy led to a flexible process, resulting in a 1,3-propanediol production and yield that depended on the initial sugar concentration. Below 56.2 g l⁻¹ of sugar concentration, cultivation on molasses or glucose showed no significant differences. However, at higher molasses concentrations, glycerol initially produced by yeast could not be totally converted into 1,3-propanediol by C. acetobutylicum and a lower 1,3-propanediol overall yield was observed. In our hand, the best results were obtained with an initial glucose concentration of 103 g l⁻¹, leading to a final 1,3-propanediol concentration of 25.5 g l⁻¹, a productivity of 0.16 g l⁻¹ h⁻¹ and 1,3-propanediol yields of 0.56 g g⁻¹ glycerol and 0.24 g g⁻¹ sugar, which is the highest value reported for a two-step process. For an initial sugar concentration (from molasses) of 56.2 g l⁻¹, 27.4 g l⁻¹ of glycerol were produced, leading to 14.6 g l⁻¹ of 1.3-propanediol and similar values of productivity, 0.15 g l⁻¹ h⁻¹, and overall yield, 0.26 g g⁻¹ sugar.     

<Emphasis Type="Italic">Clostridium beijerinckii</Emphasis> mutant with high inhibitor tolerance obtained by low-energy ion implantation

Clostridium beijerinckii mutant strain IB4, which has a high level of inhibitor tolerance, was screened by low-energy ion implantation and used for butanol fermentation from a non-detoxified hemicellulosic hydrolysate of corn fiber treated with dilute sulfuric acid (SAHHC). Evaluation of toxicity showed C. beijerinckii IB4 had a higher level of tolerance than parent strain C. beijerinckii NCIMB 8052 for five out of six phenolic compounds tested (the exception was vanillin). Using glucose as carbon source, C. beijerinckii IB4 produced 9.1 g l⁻¹ of butanol with an acetone/butanol/ethanol (ABE) yield of 0.41 g g⁻¹. When non-detoxified SAHHC was used as carbon source, C. beijerinckii NCIMB 8052 grew well but ABE production was inhibited. By contrast, C. beijerinckii IB4 produced 9.5 g l⁻¹ of ABE with a yield of 0.34 g g⁻¹, including 2.2 g l⁻¹ acetone, 6.8 g l⁻¹ butanol, and 0.5 g l⁻¹ ethanol. The remarkable fermentation and inhibitor tolerance of C. beijerinckii IB4 appears promising for ABE production from lignocellulosic materials.     

Stimulation of reductive glycerol metabolism by overexpression of an aldehyde dehydrogenase in a recombinant <Emphasis Type="Italic">Klebsiella pneumoniae</Emphasis> strain defective in the oxidative pathway

Previously, we constructed a glycerol oxidative pathway-deficient mutant strain of Klebsiella pneumoniae by inactivation of glycerol dehydrogenase (dhaD) to eliminate by-product synthesis during production of 1,3-propanediol (1,3-PD) from glycerol. Although by-product formation was successfully blocked in the resultant strain, the yield of 1,3-PD was not enhanced, probably because dhaD disruption resulted in insufficient regeneration of the cofactor NADH essential for the activity of 1,3-PD oxidoreductase (DhaT). To improve cofactor regeneration, in the present study we overexpressed an NAD⁺-dependent aldehyde dehydrogenase in the recombinant strain. To this end, an aldehyde dehydrogenase AldHk homologous to E. coli AldH but with NAD⁺-dependent propionaldehyde dehydrogenase activity was identified in K. pneumoniae. Functional analysis revealed that the substrate specificity of AldHk embraced various aldehydes including propionaldehyde, and that NAD⁺ was preferred over NADP⁺ as a cofactor. Overexpression of AldHk in the glycerol oxidative pathway-deficient mutant AK/pVOTHk resulted in a 3.6-fold increase (0.57 g l⁻¹ to 2.07 g l⁻¹) in the production of 3-hydroxypropionic acid (3-HP), and a 1.1-fold enhancement (8.43 g l⁻¹ to 9.65 g l⁻¹) of 1,3-PD synthesis, when glycerol was provided as the carbon source, compared to the levels synthesized by the control strain (AK/pVOT). Batch fermentation using AK/pVOTHk showed a significant increase (to 70%, w/w) in conversion of glycerol to the reductive metabolites, 1,3-PD and 3-HP, with no production of by-products except acetate.     

Continuous butanol production with reduced byproducts formation from glycerol by a hyper producing mutant of <Emphasis Type="Italic">Clostridium pasteurianum</Emphasis>

Butanol, a four-carbon primary alcohol (C₄H₁₀O), is an important industrial chemical and has a good potential to be used as a superior biofuel. Bio-based production of butanol from renewable feedstock is a promising and sustainable alternative to substitute petroleum-based fuels. Here, we report the development of a process for butanol production from glycerol, which is abundantly available as a byproduct of biodiesel production. First, a hyper butanol producing strain of Clostridium pasteurianum was isolated by chemical mutagenesis. The best mutant strain, C. pasteurianum MBEL_GLY2, was able to produce 10.8 g l⁻¹ butanol from 80 g l⁻¹ glycerol as compared to 7.6 g l⁻¹ butanol produced by the parent strain. Next, the process parameters were optimized to maximize butanol production from glycerol. Under the optimized batch condition, the butanol concentration, yield, and productivity of 17.8 g l⁻¹, 0.30 g g⁻¹, and 0.43 g l⁻¹ h⁻¹ could be achieved. Finally, continuous fermentation of C. pasteurianum MBEL_GLY2 with cell recycling was carried out using glycerol as a major carbon source at several different dilution rates. The continuous fermentation was run for 710 h without strain degeneration. The acetone–butanol–ethanol productivity and the butanol productivity of 8.3 and 7.8 g l⁻¹ h⁻¹, respectively, could be achieved at the dilution rate of 0.9 h⁻¹. This study reports continuous production of butanol with reduced byproducts formation from glycerol using C. pasteurianum, and thus could help design a bioprocess for the improved production of butanol.     

Production of <Emphasis Type="SmallCaps">l</Emphasis>-phenylalanine from glycerol by a recombinant <Emphasis Type="Italic">Escherichia coli</Emphasis>

The production of l-phenylalanine is conventionally carried out by fermentations that use glucose or sucrose as the carbon source. This work reports on the use of glycerol as an inexpensive and abundant sole carbon source for producing l-phenylalanine using the genetically modified bacterium Escherichia coli BL21(DE3). Fermentations were carried out at 37°C, pH 7.4, using a defined medium in a stirred tank bioreactor at various intensities of impeller agitation speeds (300–500 rpm corresponding to 0.97–1.62 m s⁻¹ impeller tip speed) and aeration rates (2–8 L min⁻¹, or 1–4 vvm). This highly aerobic fermentation required a good supply of oxygen, but intense agitation (impeller tip speed ~1.62 m s⁻¹) reduced the biomass and l-phenylalanine productivity, possibly because of shear sensitivity of the recombinant bacterium. Production of l-phenylalanine was apparently strongly associated with growth. Under the best operating conditions (1.30 m s⁻¹ impeller tip speed, 4 vvm aeration rate), the yield of l-phenylalanine on glycerol was 0.58 g g⁻¹, or more than twice the best yield attainable on sucrose (0.25 g g⁻¹). In the best case, the peak concentration of l-phenylalanine was 5.6 g L⁻¹, or comparable to values attained in batch fermentations that use glucose or sucrose. The use of glycerol for the commercial production of l-phenylalanine with E. coli BL21(DE3) has the potential to substantially reduce the cost of production compared to sucrose- and glucose-based fermentations.     

Efficient production of lactic acid from sucrose and corncob hydrolysate by a newly isolated <Emphasis Type="Italic">Rhizopus oryzae</Emphasis> GY18

The aim of this study is to investigate production of l-lactic acid from sucrose and corncob hydrolysate by the newly isolated R. oryzae GY18. R. oryzae GY18 was capable of utilizing sucrose as a sole source, producing 97.5 g l⁻¹ l-lactic acid from 120 g l⁻¹ sucrose. In addition, the strain was also efficiently able to utilize glucose and/or xylose to produce high yields of l-lactic acid. It was capable of producing up to 115 and 54.2 g l⁻¹ lactic acid with yields of up to 0.81 g g⁻¹ glucose and 0.90 g g⁻¹ xylose, respectively. Corncob hydrolysates obtained by dilute acid hydrolysis and enzymatic hydrolysis of the cellulose-enriched residue were used for lactic acid production by R. oryzae GY18. A yield of 355 g lactic acid per kg corncobs was obtained after 72 h incubation. Therefore, sucrose and corncobs could serve as potential sources of raw materials for efficient production of lactic acid by R. oryzae GY18.     

Ethanol and xylitol production from glucose and xylose at high temperature by <Emphasis Type="Italic">Kluyveromyces</Emphasis> sp. IIPE453

A yeast strain Kluyveromyces sp. IIPE453 (MTCC 5314), isolated from soil samples collected from dumping sites of crushed sugarcane bagasse in Sugar Mill, showed growth and fermentation efficiency at high temperatures ranging from 45°C to 50°C. The yeast strain was able to use a wide range of substrates, such as glucose, xylose, mannose, galactose, arabinose, sucrose, and cellobiose, either for growth or fermentation to ethanol. The strain also showed xylitol production from xylose. In batch fermentation, the strain showed maximum ethanol concentration of 82 ± 0.5 g l⁻¹ (10.4% v/v) on initial glucose concentration of 200 g l⁻¹, and ethanol concentration of 1.75 ± 0.05 g l⁻¹ as well as xylitol concentration of 11.5 ± 0.4 g l⁻¹ on initial xylose concentration of 20 g l⁻¹ at 50°C. The strain was capable of simultaneously using glucose and xylose in a mixture of glucose concentration of 75 g l⁻¹ and xylose concentration of 25 g l⁻¹, achieving maximum ethanol concentration of 38 ± 0.5 g l⁻¹ and xylitol concentration of 14.5 ± 0.2 g l⁻¹ in batch fermentation. High stability of the strain was observed in a continuous fermentation by feeding the mixture of glucose concentration of 75 g l⁻¹ and xylose concentration of 25 g l⁻¹ by recycling the cells, achieving maximum ethanol concentration of 30.8 ± 6.2 g l⁻¹ and xylitol concentration of 7.35 ± 3.3 g l⁻¹ with ethanol productivity of 3.1 ± 0.6 g l⁻¹ h⁻¹ and xylitol productivity of 0.75 ± 0.35 g l⁻¹ h⁻¹, respectively.     

Comparison of citric acid production from glycerol and glucose by different strains of <Emphasis Type="Italic">Yarrowia lipolytica</Emphasis>

A wild type strain A-101 of Y. lipolytica and its three acetate-negative mutants (Wratislavia 1.31, Wratislavia AWG7, and Wratislavia K1) were compared for the production of citric acid from glucose and glycerol (pure and crude) in batch cultures. The substrates were used either as single carbon sources or as mixtures of glucose and pure or crude glycerol. The kinetic parameters, i.e., the volumetric citric acid production rate and yield obtained in the study show that the Wratislavia 1.31 and Wratislavia AWG7 strains produced the highest amount of citric acid from glycerol, with a yield from 0.40 to 0.53 g g⁻¹. This substrate was found to be a better carbon source for the biosynthesis of citric acid than glucose. The results obtained with the same strains have shown low content of isocitric acid and polyols, such as erythritol and mannitol. Y. lipolytica A-101 strain produced the highest amount of isocitric acid, from 13.8 to 21% isocitric acid in the sum of citric acids. However, the highest concentrations of erythritol were found in cultures with Y. lipolytica Wratislavia K1, from 18.1 to 30 g l⁻¹, for glucose and pure glycerol, respectively.     

Fermentative production of<Emphasis Type="SmallCaps"> l</Emphasis>-(+)-lactic acid by an alkaliphilic marine microorganism

Of six strains of lactic acid-producing alkaliphilic microorganisms, Halolactibacillus halophilus was most efficient. It produced the highest concentration and yield of lactic acid, with minimal amounts of acetic and formic acid when sucrose and glucose were used as substrate. Mannose and xylose were poorly utilized. In batch fermentation at 30°C, pH 9 with 4 and 8% (w/v) sucrose, lactic acid was produced at 37.7 and 65.8 g l⁻¹, with yields of 95 and 83%, respectively. Likewise, when 4 and 8% (w/v) glucose were used, 33.4 and 59.6 g lactic acid l⁻¹ were produced with 85 and 76% yields, respectively. l-(+)-lactic acid had an optical purity of 98.8% (from sucrose) and 98.3% (from glucose).     

Production of ectoine through a combined process that uses both growing and resting cells of <Emphasis Type="Italic">Halomonas salina</Emphasis> DSM 5928<Superscript>T</Superscript>

Using ectoine-excreting strain Halomonas salina DSM 5928^T, we developed a new process for high-efficiency production of ectoine, which involved a combined process of batch fermentation by growing cells and production by resting cells. In the first stage, batch fermentation was carried out using growing cells under optimal fermentation conditions. The second stage was the production phase, in which ectoine was synthesized and excreted by phosphate-limited resting cells. Optimal conditions for synthesis and excretion of ectoine during batch fermentation in a 10 l fermentor were 0.5 mol l⁻¹ NaCl and an initial monosodium glutamate concentration of 80 g l⁻¹ respectively. The pH was adjusted to 7.0 and the temperature was maintained at 33°C. In phosphate-limited resting cells medium, monosodium glutamate and NaCl concentration was 200 g l⁻¹ and 0.5 mol l⁻¹, respectively, as well as pH was 7.0. The total concentration of ectoine produced was 14.86 g l⁻¹, the productivity and yield of ectoine was 7.75 g l⁻¹ day⁻¹ and 0.14 g g⁻¹, respectively, and the percentage of ectoine excreted was 79%. These levels of ectoine production and excretion are the highest reported to date.     

Citric acid production from glycerol-containing waste of biodiesel industry by Yarrowia lipolytica in batch, repeated batch, and cell recycle regimes

Yarrowia lipolytica A-101-1.22 produces high citric acid (112 g l⁻¹) with a yield of 0.6 g g⁻¹ and a productivity of 0.71 g l⁻¹ h⁻¹ during batch cultivation in the medium with glycerol-containing waste of biodiesel industry. However, it was observed that the specific citric acid production rate, which was maximal at the beginning of the biosynthesis, gradually decreases in the late production phase and it makes continuation of the process over 100 h pointless. The cell recycle and the repeated batch regimes were performed as ways for prolongation of citric acid synthesis by yeast. Using cell recycle, the active citric acid biosynthesis (96–107 g l⁻¹) with a yield of 0.64 g g⁻¹ and a productivity of 1.42 g l⁻¹ h⁻¹ was prolongated up to 300 h. Repeated batch culture remained stable for over 1000 h; the RB variant of 30% feed every 3 days showed the best results: 124.2 g l^-1 citric acid with a yield of 0.77 g g^-1 and a productivity of 0.85 g l^-1 h^-1.     

Increase of lycopene production by supplementing auxiliary carbon sources in metabolically engineered <Emphasis Type="Italic">Escherichia coli</Emphasis>

In the fed-batch culture of glycerol using a metabolically engineered strain of Escherichia coli, supplementation with glucose as an auxiliary carbon source increased lycopene production due to a significant increase in cell mass, despite a reduction in specific lycopene content. l-Arabinose supplementation increased lycopene production due to increases in cell mass and specific lycopene content. Supplementation with both glucose and l-arabinose increased lycopene production significantly due to the synergistic effect of the two sugars. Cell growth by the consumption of carbon sources was related to endogenous metabolism in the host E. coli. Supplementation with l-arabinose stimulated only the mevalonate pathway for lycopene biosynthesis and supplementation with both glucose and l-arabinose stimulated synergistically only the mevalonate pathway. In the fed-batch culture of glycerol with 10 g l⁻¹ glucose and 7.5 g l⁻¹ l-arabinose, the cell mass, lycopene concentration, specific lycopene content, and lycopene productivity after 34 h were 42 g l⁻¹, 1,350 mg l⁻¹, 32 mg g cells⁻¹, and 40 mg l⁻¹ h⁻¹, respectively. These values were 3.9-, 7.1-, 1.9-, and 11.7-fold higher than those without the auxiliary carbon sources, respectively. This is the highest reported concentration and productivity of lycopene.     

Biomass and lipid productivities of <Emphasis Type="Italic">Chlorella vulgaris</Emphasis> under autotrophic,heterotrophic and mixotrophic growth conditions

Biomass and lipid productivities of Chlorella vulgaris under different growth conditions were investigated. While autotrophic growth did provide higher cellular lipid content (38%), the lipid productivity was much lower compared with those from heterotrophic growth with acetate, glucose, or glycerol. Optimal cell growth (2 g l⁻¹) and lipid productivity (54 mg l⁻¹ day⁻¹) were attained using glucose at 1% (w/v) whereas higher concentrations were inhibitory. Growth of C. vulgaris on glycerol had a similar dose effects as those from glucose. Overall, C. vulgaris is mixotrophic.     

Succinic acid production by a newly isolated bacterium

A new bacterial strain producing succinic acid was enriched from bovine rumen content. It is facultatively anaerobic, belongs to the family Pasteurellaceae and has similarity to the genus Mannheimia. In batch cultivations with D-glucose or sucrose the strain produced up to 5.8 g succinic acid l⁻¹ with a productivity and a yield of up to 1.5 g l⁻¹ h⁻¹ and 0.6 g g⁻¹, respectively. With crude glycerol up to 8.4 g l⁻¹, 0.9 g l⁻¹ h⁻¹ and 1.2 g g⁻¹ were obtained. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Malic acid production from thin stillage by <Emphasis Type="Italic">Aspergillus</Emphasis> species

The ability of Aspergillus strains to utilize thin stillage to produce malic acid was compared. The highest malic acid was produced by Aspergillus niger ATCC 9142 at 17 g l⁻¹. Biomass production from thin stillage was similar with all strains but ATCC 10577 was the highest at 19 g l⁻¹. The highest malic acid yield (0.8 g g⁻¹) was with A. niger ATCC 9142 and ATCC 10577 on the stillage. Thus, thin stillage has the potential to act as a substrate for the commercial production of food-grade malic acid by the A. niger strains.     

Inhibition of Clostridium butyricum by 1,3-propanediol and diols during glycerol fermentation

1,3-Propanediol inhibition during glycerol fermentation to 1,3-propanediol by Clostridium butyricum CNCM 1211 has been studied. The initial concentration of the 1,3-propanediol affected the growth of the bacterium more than the glycerol fermentation. μ _max was inversely proportional to the initial concentration of 1,3-propanediol (0–65 g l⁻¹). For glycerol at 20 g l⁻¹, the growth and fermentation were completely stopped at an initial 1,3-propanediol concentration of 65 g l⁻¹. However, for an initial 1,3-propanediol concentration of 50 g l⁻¹ and glycerol at 70 g l⁻¹, the final concentration (initial and produced) of 1,3-propanediol reached 83.7 g l⁻¹(1.1 M), with complete consumption of the glycerol. Therefore, during the fermentation, the strain tolerated a 1,3-propanediol concentration higher than the initial inhibitory concentration (65 g l⁻¹). The addition of 1,2-propanediol or 2,3-butanediol (50 g l⁻¹) in the presence of glycerol (50–100 g l⁻¹), showed that 2-diols reduced the μ _max in a similar way to 1,3-propanediol. The measurement of the osmotic pressure of glycerol solutions, diols and diol/glycerol mixtures did not indicate any differences between these compounds. The hypothesis of diol inhibition was discussed. Taking into account the strain tolerance of highly concentrated 1,3-propanediol during fermentation, the fermentation processes for optimising production were considered. Received: 15 November 1999 / Revision received: 1 February 2000 / Accepted: 4 February 2000     

Dynamic behavior of glycerol–glucose co-fermentation for 1,3-propanediol production by <Emphasis Type="Italic">Klebsiella pneumoniae</Emphasis> DSM 2026 under micro-aerobic conditions

Sustained oscillations have been observed in cell growth and glycerol metabolism by Klebsiella pneumoniae during long-term continuous cultivations under anaerobic conditions. However, the oscillation behavior of glucose–glycerol co-fermentation under micro-aerobic conditions has yet not been studied. In this study, the unclear mechanism of oscillation was investigated by using different substrates including glycerol, glucose, and mixtures of glycerol and glucose. A large perturbation of substrate concentration was operated to study the dynamic behavior of continuous fermentation by K. pneumoniae DSM 2026 under micro-aerobic conditions. Oscillations occurred when 80 g of glycerol l⁻¹ was used as single carbon source or co-substrate with 35 g of glucose l⁻¹, whereas no oscillation was observed when glucose was used alone. During the oscillation phases, parameters periodically passed maxima and minima at a relatively constant time interval, and the period of oscillation was 10–16 h. The comparison between glycerol and glucose metabolism revealed that a potential mechanism of oscillation lies in the accumulation of 3-hydroxypropionaldehyde, which is toxic to cell growth.