Distinct early folding and aggregation properties of Alzheimer amyloid-beta peptides Abeta40 and Abeta42: stable trimer or tetramer formation by Abeta42

The amyloid beta peptide (Abeta), composed of 40 or 42 amino acids, is a critical component in the etiology of the neurodegenerative Alzheimer disease. Abeta is prone to aggregate and forms amyloid fibrils progressively both in vitro and in vivo. To understand the process of amyloidogenesis, it is pivotal to examine the initial stages of the folding process. We examined the equilibrium folding properties, assembly states, and stabilities of the early folding stages of Abeta40 and Abeta42 prior to fibril formation. We found that Abeta40 and Abeta42 have different conformations and assembly states upon refolding from their unfolded ensembles. Abeta40 is predominantly an unstable and collapsed monomeric species, whereas Abeta42 populates a stable structured trimeric or tetrameric species at concentrations above approximately 12.5 microm. Thermodynamic analysis showed that the free energies of Abeta40 monomer and Abeta42 trimer/tetramer are approximately 1.1 and approximately 15/ approximately 22 kcal/mol, respectively. The early aggregation stages of Abeta40 and Abeta42 contain different solvent-exposed hydrophobic surfaces that are located at the sequences flanking its protease-resistant segment. The amyloidogenic folded structure of Abeta is important for the formation of spherical beta oligomeric species. However, beta oligomers are not an obligatory intermediate in the process of fibril formation because oligomerization is inhibited at concentrations of urea that have no effect on fibril formation. The distinct initial folding properties of Abeta40 and Abeta42 may play an important role in the higher aggregation potential and pathological significance of Abeta42.     

Low concentrations of sodium dodecyl sulfate induce the extension of beta 2-microglobulin-related amyloid fibrils at a neutral pH

In beta(2)-microglobulin-related (Abeta2M) amyloidosis, partial unfolding of beta(2)-microglobulin (beta2-m) is believed to be prerequisite to its assembly into Abeta2M amyloid fibrils in vivo. Although low pH or 2,2,2-trifluoroethanol at a low concentration has been reported to induce partial unfolding of beta2-m and subsequent amyloid fibril formation in vitro, factors that induce them under near physiological conditions have not been determined. Using fluorescence spectroscopy with thioflavin T, circular dichroism spectroscopy, and electron microscopy, we here show that at low concentrations, sodium dodecyl sulfate (SDS) converts natively folded beta2-m monomers into partially folded, alpha-helix-containing conformers. Surprisingly, this results in the extension of Abeta2M amyloid fibrils at neutral pH, which could be explained basically by a first-order kinetic model. At low concentrations, SDS also stabilized the fibrils at neutral pH. These SDS effects were concentration-dependent and maximal at approximately 0.5 mM, around the critical micelle concentration of SDS (0.67 mM). As the concentration of SDS was increased above 1 mM, the alpha-helix content of beta2-m rose to approximately 10%, while the beta-sheet content decreased to approximately 20%, a change paralleled by a complete cessation of fibril extension and the destabilization of the fibrils. Detergents of other classes had no significant effect on the extension of fibrils. These findings are consistent with the hypothesis that in vivo, specific factors (e.g., phospholipids) that affect the conformation and stability of beta2-m and amyloid fibrils will have significant effects on the kinetics of Abeta2M fibril formation.     

A molecular model of Alzheimer amyloid beta-peptide fibril formation

Polymerization of the amyloid beta (Abeta) peptide into protease-resistant fibrils is a significant step in the pathogenesis of Alzheimer's disease. It has not been possible to obtain detailed structural information about this process with conventional techniques because the peptide has limited solubility and does not form crystals. In this work, we present experimental results leading to a molecular level model for fibril formation. Systematically selected Abeta-fragments containing the Abeta16-20 sequence, previously shown essential for Abeta-Abeta binding, were incubated in a physiological buffer. Electron microscopy revealed that the shortest fibril-forming sequence was Abeta14-23. Substitutions in this decapeptide impaired fibril formation and deletion of the decapeptide from Abeta1-42 inhibited fibril formation completely. All studied peptides that formed fibrils also formed stable dimers and/or tetramers. Molecular modeling of Abeta14-23 oligomers in an antiparallel beta-sheet conformation displayed favorable hydrophobic interactions stabilized by salt bridges between all charged residues. We propose that this decapeptide sequence forms the core of Abeta-fibrils, with the hydrophobic C terminus folding over this core. The identification of this fundamental sequence and the implied molecular model could facilitate the design of potential inhibitors of amyloidogenesis.     

Partially folded intermediates as critical precursors of light chain amyloid fibrils and amorphous aggregates

Light chain, or AL, amyloidosis is a pathological condition arising from systemic extracellular deposition of monoclonal immunoglobulin light chain variable domains in the form of insoluble amyloid fibrils, especially in the kidneys. Substantial evidence suggests that amyloid fibril formation from native proteins occurs via a conformational change leading to a partially folded intermediate conformation, whose subsequent association is a key step in fibrillation. In the present investigation, we have examined the properties of a recombinant amyloidogenic light chain variable domain, SMA, to determine whether partially folded intermediates can be detected and correlated with aggregation. The results from spectroscopic and hydrodynamic measurements, including far- and near-UV circular dichroism, FTIR, NMR, and intrinsic tryptophan fluorescence and small-angle X-ray scattering, reveal the build-up of two partially folded intermediate conformational states as the pH is decreased (low pH destabilized the protein and accelerated the kinetics of aggregation). A relatively nativelike intermediate, I(N), was observed between pH 4 and 6, with little loss of secondary structure, but with significant tertiary structure changes and enhanced ANS binding, indicating exposed hydrophobic surfaces. At pH below 3, we observed a relatively unfolded, but compact, intermediate, I(U), which was characterized by decreased tertiary and secondary structure. The I(U) intermediate readily forms amyloid fibrils, whereas I(N) preferentially leads to amorphous aggregates. Except at pH 2, where negligible amorphous aggregate is formed, the amorphous aggregates formed significantly more rapidly than the fibrils. This is the first indication that different partially folded intermediates may be responsible for different aggregation pathways (amorphous and fibrillar). The data support the hypothesis that amyloid fibril formation involves the ordered self-assembly of partially folded species that are critical soluble precursors of fibrils.     

The assembly of individual chaplin peptides from Streptomyces coelicolor into functional amyloid fibrils

The self-association of proteins into amyloid fibrils offers an alternative to the natively folded state of many polypeptides. Although commonly associated with disease, amyloid fibrils represent the natural functional state of some proteins, such as the chaplins from the soil-dwelling bacterium Streptomyces coelicolor, which coat the aerial mycelium and spores rendering them hydrophobic. We have undertaken a biophysical characterisation of the five short chaplin peptides ChpD-H to probe the mechanism by which these peptides self-assemble in solution to form fibrils. Each of the five chaplin peptides produced synthetically or isolated from the cell wall is individually surface-active and capable of forming fibrils under a range of solution conditions in vitro. These fibrils contain a highly similar cross-β core structure and a secondary structure that resembles fibrils formed in vivo on the spore and mycelium surface. They can also restore the growth of aerial hyphae to a chaplin mutant strain. We show that cysteine residues are not required for fibril formation in vitro and propose a role for the cysteine residues conserved in four of the five short chaplin peptides.     

A twisted four-sheeted model for an amyloid fibril

The formation of amyloid fibers and their deposition in the body is a characteristic of a number of devastating human diseases. Here, we propose a structural model, based on X-ray diffraction data, for the basic structure of an amyloid fibril formed by using the variants of the B1 domain of IgG binding protein G of Streptococcus. The model for the fibril incorporates four beta sheets in a bundle with a diameter of 45 A. Its cross-section, or layer, consists of four strands, one strand from each sheet. Layers stack on top of each other to form the fibril, which has an overall helical twist with a periodicity of about 154 A. Each strand interacts in a parallel fashion with the strands in the layers above and below it, in an infinite beta sheet. Some geometric features of this model and the logic behind it may be applicable for constructing other related cross-beta amyloid fibrils.     

Unraveling the mysteries of protein folding and misfolding

This mini-review focuses on the processes and consequences of protein folding and misfolding. The latter process often leads to protein aggregation and precipitation with the aggregates adopting either highly ordered (amyloid fibril) or disordered (amorphous) forms. In particular, the amyloid fibril is discussed because this form has gained considerable notoriety due to its close links to a variety of debilitating diseases including Alzheimer's, Parkinson's, Huntington's, and Creutzfeldt-Jakob diseases, and type-II diabetes. In each of these diseases a different protein forms fibrils, yet the fibrils formed have a very similar structure. The mechanism by which fibrils form, fibril structure, and the cytotoxicity associated with fibril formation are discussed. The generic nature of amyloid fibril structure suggests that a common target may be accessible to treat amyloid fibril-associated diseases. As such, the ability of some molecules, for example, the small heat-shock family of molecular chaperone proteins, to inhibit fibril formation is of interest due to their therapeutic potential.     

Direct observation of amyloid fibril growth monitored by thioflavin T fluorescence

Real-time monitoring of fibril growth is essential to clarify the mechanism of amyloid fibril formation. Thioflavin T (ThT) is a reagent known to become strongly fluorescent upon binding to amyloid fibrils. Here, we show that, by monitoring ThT fluorescence with total internal reflection fluorescence microscopy (TIRFM), amyloid fibrils of beta2-microgobulin (beta2-m) can be visualized without requiring covalent fluorescence labeling. One of the advantages of TIRFM would be that we selectively monitor fibrils lying along the slide glass, so that we can obtain the exact length of fibrils. This method was used to follow the kinetics of seed-dependent beta2-m fibril extension. The extension was unidirectional with various rates, suggesting the heterogeneity of the amyloid structures. Since ThT binding is common to all amyloid fibrils, the present method will have general applicability for the analysis of amyloid fibrils. We confirmed this with the octapeptide corresponding to the C terminus derived from human medin and the Alzheimer's amyloid beta-peptide.     

Covalent structural changes in unfolded GroES that lead to amyloid fibril formation detected by NMR: insight into intrinsically disordered proteins

Co-chaperonin GroES from Escherichia coli works with chaperonin GroEL to mediate the folding reactions of various proteins. However, under specific conditions, i.e. the completely disordered state in guanidine hydrochloride, this molecular chaperone forms amyloid fibrils similar to those observed in various neurodegenerative diseases. Thus, this is a good model system to understand the amyloid fibril formation mechanism of intrinsically disordered proteins. Here, we identified a critical intermediate of GroES in the early stages of this fibril formation using NMR and mass spectroscopy measurements. A covalent rearrangement of the polypeptide bond at Asn(45)-Gly(46) and/or Asn(51)-Gly(52) that eventually yield β-aspartic acids via deamidation of asparagine was observed to precede fibril formation. Mutation of these asparagines to alanines resulted in delayed nucleus formation. Our results indicate that peptide bond rearrangement at Asn-Gly enhances the formation of GroES amyloid fibrils. The finding provides a novel insight into the structural process of amyloid fibril formation from a disordered state, which may be applicable to intrinsically disordered proteins in general.     

Role of the N and C-terminal strands of beta 2-microglobulin in amyloid formation at neutral pH

Beta 2-microglobulin (beta(2)m) is known to form amyloid fibrils de novo in vitro under acidic conditions (below pH 4.8). Fibril formation at neutral pH, however, has only been observed by deletion of the N-terminal six residues; by the addition of pre-assembled seeds; or in the presence of Cu(2+). Based on these observations, and other structural data, models for fibril formation of beta(2)m have been proposed that involve the fraying of the N and C-terminal beta-strands and the consequent loss of edge strand protective features. Here, we examine the role of the N and C-terminal strands in the initiation of fibrillogenesis of beta(2)m by creating point mutations in strands A and G and comparing the properties of the resulting proteins with variants containing similar mutations elsewhere in the protein. We show that truncation of buried hydrophobic side-chains in strands A and G promotes rapid fibril formation at neutral pH, even in unseeded reactions, and increases the rate of fibril formation under acidic conditions. By contrast, similar mutations created in the remaining seven beta-strands of the native protein have little effect on the rate or pH dependence of fibril formation. The data are consistent with the view that perturbation of the N and C-terminal edge strands is an important feature in the generation of assembly-competent states of beta(2)m.     

Review: immunoglobulin light chain amyloidosis--the archetype of structural and pathogenic variability

AL amyloidosis is caused by deposition in target tissue of amyloid fibrils constituted by monoclonal immunoglobulin light chains. The amyloidogenic plasma cells derive from a transformed memory B cell that can be identified by anti-idiotype monoclonal antibodies. Comparison of the primary structures of amyloidogenic and nonamyloidogenic light chains does not show any common structural motif in the amyloidogenic variants but reveals peculiar replacements which can destabilize the folding state. Reduced folding stability now appears to be a unifying property of amyloidogenic light chains. The tendency of these proteins to populate a partially unfolded intermediate state is a key event in the self-association that progresses to the formation of oligomers and fibrils. The mechanism of organ damage caused by AL amyloid deposition is not known, but clinical findings suggest that the process of amyloid fibril formation itself exerts tissue toxic effects independently of the amount of amyloid deposited. Since the disease is caused by the neoplastic expansion of the plasma cell population synthesizing the amyloidogenic light chains, the clone represents the prime therapeutic target of conventional chemotherapy and experimental immunotherapy. In common with other types of amyloidosis the therapeutic strategy can take advantage of drugs able to improve the reabsorption of the amyloid deposits or able to bind and stabilize the light chain in the native-like folded state.     

Design of a Coiled-Coil-based Model Peptide System to Explore the Fundamentals of Amyloid Fibril Formation

Protein deposition as amyloid fibrils underlies more than twenty severely debilitating human disorders. Interestingly, recent studies suggest that all peptides and proteins possess an intrinsic ability to assemble into amyloid fibrils similar to those observed in disease states. The common properties and characteristics of amyloid aggregates thus offer the prospect that simple model systems can be used to systematically assess the factors that predispose a native protein to form amyloid fibrils and understand the origin and progression of fatal disorders associated with amyloid formation. Here, we report the de novo design of a 17-residue peptide model system, referred to as cc, which forms a protein-like coiled-coil structure under ambient solution conditions but can be easily converted into amyloid fibrils by raising the temperature. Oxidation of methionine residues at selected hydrophobic positions completely abolished amyloid fibril formation of the peptide while not interfering with its coiled-coil structure. This finding indicates that a small number of site-specific hydrophobic interactions can play a major role in the packing of polypeptide chain segments within amyloid fibrils. The simplicity and characteristics of the cc system make it highly suitable for probing molecular details of the assembly of amyloid structures. Abbreviations used for amino acids follow the recommendations of the IUPAC-IUB Commission of Biochemical Nomenclature [Eur. J. Biochem., 138 (1984) 9].     

Identification of the region responsible for fibril formation in the CAD domain of caspase-activated DNase

Caspase-activated DNase (CAD) has a compact domain at its N-terminus (CAD domain, 87 amino acid residues), which comprises one alpha-helix and five beta-strands forming a single sheet. The CAD domain of CAD (CAD-CD) forms amyloid fibrils containing alpha-helix at low pH in the presence of salt. To obtain insights into the mechanism of amyloid fibril formation, we identified the peptide region essential for fibril formation of CAD-CD and the region responsible for the salt requirement. We searched for these regions by constructing a series of deletion and point mutants of CAD-CD. Fibril formation by these CAD-CD mutants was examined by fluorescence analysis of thioflavin T and transmission electron microscopy. C-Terminal deletion and point mutation studies revealed that an aromatic residue near the C-terminus (Trp81) is critical for fibril formation. In addition, the main chain conformation of the beta5 strand, which forms a hydrophobic core with Trp81, was found to be important for the fibril formation by CAD-CD. The N-terminal 30 amino acid region containing two beta-strands was not essential for fibril formation. Rather, the N-terminal region was found to be responsible for the requirement of salt for fibril formation.     

Optimum amyloid fibril formation of a peptide fragment suggests the amyloidogenic preference of beta2-microglobulin under physiological conditions

Beta(2)-microglobulin (beta(2)m) is a major component of amyloid fibrils deposited in patients with dialysis-related amyloidosis. Although full-length beta(2)m readily forms amyloid fibrils in vitro by seed-dependent extension with a maximum at pH 2.5, fibril formation under physiological conditions as detected in patients has been difficult to reproduce. A 22-residue K3 peptide of beta(2)m, Ser(20)-Lys(41), obtained by digestion with Acromobacter protease I, forms amyloid fibrils without seeding. To obtain further insight into the mechanism of fibril formation, we studied the pH dependence of fibril formation of the K3 peptide and its morphology using a ThT fluorescence assay and electron microscopy, respectively. K3 peptide formed amyloid fibrils over a wide range of pH values with an optimum around pH 7 and contrasted with the pH profile of the seed-dependent extension reaction of full-length beta(2)m. This suggests that once the rigid native-fold of beta(2)m is unfolded and additional factors triggering the nucleation process are provided, full-length beta(2)m discloses an intrinsic potential to form amyloid fibrils at neutral pH. The fibril formation was strongly promoted by dimerization of K3 through Cys(25). The morphology of the fibrils varied depending on the fibril formation conditions and the presence or absence of a disulfide bond. Various fibrils had the potential to seed fibril formation of full-length beta(2)m accompanied with a characteristic lag phase, suggesting that the internal structures are similar.     

Molecular dynamics simulations of a fibrillogenic peptide derived from apolipoprotein C-II

The pathway to amyloid fibril formation in proteins involves specific structural changes leading to the combination of misfolded intermediates into oligomeric assemblies. Recent NMR studies showed the presence of “turns” in amyloid peptides, indicating that turn formation may play an important role in the nucleation of the intramolecular folding and possible assembly of amyloid. Fully solvated all-atom molecular dynamics simulations were used to study the structure and dynamics of the apolipoprotein C-II peptide 56 to 76, associated with the formation of amyloid fibrils. The peptide populated an ensemble of turn structures, stabilized by hydrogen bonds and hydrophobic interactions enabling the formation of a strong hydrophobic core which may provide the conditions required to initiate aggregation. Two competing mechanisms discussed in the literature were observed. This has implications in understanding the mechanism of amyloid formation in not only apoC-II and its fragments, but also in other amyloidogenic peptides.     

Investigation of a peptide responsible for amyloid fibril formation of beta 2-microglobulin by achromobacter protease I.

To obtain insight into the mechanism of amyloid fibril formation from beta(2)-microglobulin (beta2-m), we prepared a series of peptide fragments using a lysine-specific protease from Achromobacter lyticus and examined their ability to form amyloid fibrils at pH 2.5. Among the nine peptides prepared by the digestion, the peptide Ser(20)-Lys(41) (K3) spontaneously formed amyloid fibrils, confirmed by thioflavin T binding and electron microscopy. The fibrils composed of K3 peptide induced fibril formation of intact beta2-m with a lag phase, distinct from the extension reaction without a lag phase observed for intact beta2-m seeds. Fibril formation of K3 peptide with intact beta2-m seeds also exhibited a lag phase. On the other hand, the extension reaction of K3 peptide with the K3 seeds occurred without a lag phase. At neutral pH, the fibrils composed of either intact beta2-m or K3 peptide spontaneously depolymerized. Intriguingly, the depolymerization of K3 fibrils was faster than that of intact beta2-m fibrils. These results indicated that, although K3 peptide can form fibrils by itself more readily than intact beta2-m, the K3 fibrils are less stable than the intact beta2-m fibrils, suggesting a close relation between the free energy barrier of amyloid fibril formation and its stability.     

Insulin amyloid fibrillation at above 100 degrees C: new insights into protein folding under extreme temperatures

To investigate the folding behavior of amyloidogenic proteins under extreme temperatures, the kinetics of fibrillation and accompanying secondary structure transitions of bovine insulin were studied for temperatures ranging up to 140 degrees C. The presence of extreme heat stress had traditionally been associated with irreversible denaturation of protein while the initial steps of such a denaturation process may be common with a fibril formation pathway of amyloidogenic proteins. The present work demonstrates the ability of insulin to form amyloid fibrils at above 100 degrees C. Amyloid formation was gradually replaced by random coil generation after approximately 80 degrees C until no amyloid was detected at 140 degrees C. The morphology of insulin amyloid fibrils underwent sharp changes with increasing the temperature. The dependence of amyloid formation rate on incubation temperature followed non-Arrhenius kinetics, which is explained by temperature-dependent enthalpy change for amyloid formation. The intermediate stage of amyloid formation and random coil generation consisted of a partially folded intermediate common to both pathways. The fully unfolded monomers in random coil conformation showed partial reversibility through this intermediate by reverting back to the amyloid pathway when formed at 140 degrees C and incubated at 100 degrees C. This study highlights the non-Arrhenius kinetics of amyloid fibrillation under extreme temperatures, and elucidates its intermediate stage common with random coil formation.     

A common beta-sheet architecture underlies in vitro and in vivo beta2-microglobulin amyloid fibrils

Misfolding and aggregation of normally soluble proteins into amyloid fibrils and their deposition and accumulation underlies a variety of clinically significant diseases. Fibrillar aggregates with amyloid-like properties can also be generated in vitro from pure proteins and peptides, including those not known to be associated with amyloidosis. Whereas biophysical studies of amyloid-like fibrils formed in vitro have provided important insights into the molecular mechanisms of amyloid generation and the structural properties of the fibrils formed, amyloidogenic proteins are typically exposed to mild or more extreme denaturing conditions to induce rapid fibril formation in vitro. Whether the structure of the resulting assemblies is representative of their natural in vivo counterparts, thus, remains a fundamental unresolved issue. Here we show using Fourier transform infrared spectroscopy that amyloid-like fibrils formed in vitro from natively folded or unfolded beta(2)-microglobulin (the protein associated with dialysis-related amyloidosis) adopt an identical beta-sheet architecture. The same beta-strand signature is observed whether fibril formation in vitro occurs spontaneously or from seeded reactions. Comparison of these spectra with those of amyloid fibrils extracted from patients with dialysis-related amyloidosis revealed an identical amide I' absorbance maximum, suggestive of a characteristic and conserved amyloid fold. Our results endorse the relevance of biophysical studies for the investigation of the molecular mechanisms of beta(2)-microglobulin fibrillogenesis, knowledge about which may inform understanding of the pathobiology of this protein.