Specific Detection of the Gene for the Extracellular Neutral Protease of Bacillus cereus by PCR and Blot Hybridization

A pair of primers and a gene probe for the amplification and detection of the Bacillus cereus neutral protease gene (NPRC) were developed. Specificity for the npr genes of the B. cereus group members B. cereus, B. mycoides, and B. thuringiensis was shown. Restriction polymorphism patterns of the PCR products confirmed the presence of the NPRC gene in all three species.     

Discrimination of Bacillus cereus and Bacillus thuringiensis with 16S rRNA and gyrB gene based PCR primers and sequencing of their annealing sites

AIMS: To evaluate the possibility for discrimination of Bacillus cereus and B. thuringiensis using 16S rRNA and gyrB gene based PCR methods, and to obtain the sequences of the primer annealing sites so that the PCR results may be explained. METHODS AND RESULTS: Based on the sequence difference in the variable region (V1) of 16S rRNA and in the gyrB gene between B. cereus and B. thuringiensis, PCR primers specific to these Bacillus spp. were designed. When these primers were used to discriminate B. cereus and B. thuringiensis, six of 82 B. cereus strains were identified as B. thuringiensis while 67 of 73 B. thuringiensis strains were identified as B. cereus. Sequence analysis of the primer annealing sites showed that there is no clear-cut difference in the V1 region of 16S rRNA, and in the gyrB gene, between B. cereus and B. thuringiensis strains. CONCLUSIONS: Although 16S rDNA based probes and gyrB gene based PCR primers have been suggested for the discrimination of B. cereus and B. thuringiensis strains, when a large number of Bacillus strains was tested, results showed that discrimination between B. cereus and B. thuringiensis is difficult. Therefore, to distinguish B. thuringiensis from B. cereus, a single feature, such as the presence of a parasporal crystal protein or cry gene, may sometimes be reliable. SIGNIFICANCE AND IMPACT OF THE STUDY: Discrimination between B. cereus and B. thuringiensis is a challenging debate to which this paper makes a contribution.     

Cereulide, the emetic toxin of Bacillus cereus, is putatively a product of nonribosomal peptide synthesis

AIMS: To determine if cereulide, the emetic toxin produced by Bacillus cereus, is produced by a nonribosomal peptide synthetase (NRPS). METHODS AND RESULTS: NC Y, an emetic strain of Bacillus cereus, was examined for a NRPS gene using PCR with primers recognizing a fragment of a NRPS gene from the cyanobacterium Microcystis. The amplicon was sequenced and compared with other gene sequences using BLAST analysis, which showed that the amplicon from strain NC Y was similar in sequence to peptide synthetase genes in other micro-organisms, including Bacillus subtilis and B. brevis, while no such sequence was found in the complete genome sequence of a nonemetic strain of B. cereus. Specific PCR primers were then designed and used to screen 40 B. cereus isolates previously implicated in outbreaks of foodborne illness. The isolates were also screened for toxin production using the MTT cell cytotoxicity assay. PCR and MTT assay screening of the B. cereus isolates revealed a high correlation between the presence of the NRPS gene and cereulide production. CONCLUSIONS: The results indicate that cereulide is produced by a NRPS complex. SIGNIFICANCE AND IMPACT OF THE STUDY: This is the first study to provide evidence identifying the mechanism of production of cereulide, the emetic toxin of B. cereus. The PCR primers developed in the study allow determination of the potential for cereulide production among isolates of B. cereus.     

PCR assay of the groEL gene for detection and differentiation of Bacillus cereus group cells

Strains of species in the Bacillus cereus group are potentially enterotoxic. Thus, the detection of all B. cereus group strains is important. As 16S ribosomal DNA sequence analysis cannot adequately differentiate species of the B. cereus group, we explored the potential of the groEL gene as a phylogenetic marker. A phylogenetic analysis of the groEL sequences of 78 B. cereus group strains revealed that the B. cereus group strains were split into two major clusters, one including six B. mycoides and one B. pseudomycoides (cluster II) and the other including two B. mycoides and the rest of the B. cereus group strains (cluster I). Cluster I was further differentiated into two subclusters, Ia and Ib. The sodA gene sequences of representative strains from different clusters were also compared. The phylogenetic tree constructed from the sodA sequences showed substantial similarity to the tree constructed from the groEL sequences. Based on the groEL sequences, a PCR assay for detection and identification of B. cereus group strains was developed. Subsequent restriction fragment length polymorphism (RFLP) analysis verified the PCR amplicons and the differentiation of the B. cereus group strains. RFLP with MboI was identical for all the B. cereus group strains analyzed, while RFLP with MfeI or PstI classified all B. cereus and B. thuringiensis strains into two groups. All cluster II B. mycoides and B. pseudomycoides strains could be discriminated from other B. cereus group bacteria by restriction analysis with TspRI.     

Cloning and sequencing of the gene encoding the phosphatidylcholine-preferring phospholipase C of Bacillus cereus

A synthetic oligodeoxynucleotide probe was used to clone the gene encoding the phosphatidylcholine-preferring phospholipase C of Bacillus cereus. The sequence of a 2050-bp restriction fragment containing the gene was determined. Analysis of the gene-derived amino acid (aa) sequence showed that this exoenzyme is probably synthesized as a 283-aa precursor with a 24-aa signal peptide and a 14-aa propeptide. The mature, secreted enzyme comprises 245 aa residues. Sonicates of Escherichia coli HB101 carrying the gene on a multicopy plasmid showed phospholipase C activity. This activity was inhibited by Tris, a known inhibitor of the B. cereus enzyme and also by antiserum raised against pure B. cereus phospholipase C. We conclude therefore that the gene is expressed in E. coli. The cloning and sequencing described here complete the first step toward using in vitro mutagenesis for investigations of the structure-function relationships of B. cereus phospholipase C.     

Molecular approaches to examine the phosphorylation state of the C type natriuretic peptide receptor

The intracellular domain of the C type natriuretic peptide receptor (NPRC) contains one threonine and several serine residues where phosphorylation is thought to occur. Several phosphorylation consensus sequences for various kinases have been identified within the intracellular domain of NPRC, but the exact residues that are phosphorylated and the specific kinases responsible for their phosphorylation have not been thoroughly defined. Here we introduce a recombinant GST fusion protein and a rat gastric mucosa (RGM1) cell line as molecular tools to study the phosphorylation state of NPRC in vitro and in vivo, respectively. We utilize a previously characterized polyclonal antibody against NPRC to probe for total NPRC protein and various phosphospecific and substrate motif antibodies to probe for phosphorylation of NPRC. Phosphoprotein staining reagents were used with a phosphoprotein control set to detect phosphorylation of NPRC at serine and threonine residues. Recombinant GST‐NPRC fusion protein was phosphorylated in vitro by RGM1 lysate in the presence of adenosine‐5'‐triphosphate (ATP). Western blot analysis using a monoclonal phospho‐Thr antibody, which exclusively detects phosphorylated threonine residues, and does not cross‐react with phosphorylated serine residues revealed NPRC immunoprecipitated from RGM1 lysate is phosphorylated on a threonine residue. Global analysis of the entire rat NPRC sequence using a protein kinase A (PKA) prediction algorithm, identified five putative PKA phosphorylation sites containing a serine residue and one containing a threonine residue, Thr 505. Taken together, the data presented here suggest that rat NPRC is a substrate for PKA and Thr 505 located within the intracellular domain of NPRC is a likely candidate site for the phosphorylation. J. Cell. Biochem. 110: 985–994, 2010. © 2010 Wiley‐Liss, Inc.     

Identification and partial characterization of the nonribosomal peptide synthetase gene responsible for cereulide production in emetic Bacillus cereus

Cereulide, a depsipeptide structurally related to valinomycin, is responsible for the emetic type of gastrointestinal disease caused by Bacillus cereus. Due to its chemical structure, (D-O-Leu-D-Ala-L-O-Val-L-Val)(3), cereulide might be synthesized nonribosomally. Therefore, degenerate PCR primers targeted to conserved sequence motifs of known nonribosomal peptide synthetase (NRPS) genes were used to amplify gene fragments from a cereulide-producing B. cereus strain. Sequence analysis of one of the amplicons revealed a DNA fragment whose putative gene product showed significant homology to valine activation NRPS modules. The sequences of the flanking regions of this DNA fragment revealed a complete module that is predicted to activate valine, as well as a putative carboxyl-terminal thioesterase domain of the NRPS gene. Disruption of the peptide synthetase gene by insertion of a kanamycin cassette through homologous recombination produced cereulide-deficient mutants. The valine-activating module was highly conserved when sequences from nine emetic B. cereus strains isolated from diverse geographical locations were compared. Primers were designed based on the NRPS sequence, and the resulting PCR assay, targeting the ces gene, was tested by using a panel of 143 B. cereus group strains and 40 strains of other bacterial species showing PCR bands specific for only the cereulide-producing B. cereus strains.     

Simultaneous detection and identification of Bacillus cereus group bacteria using multiplex PCR

Bacillus cereus group bacteria share a significant degree of genetic similarity. Thus, to differentiate and identify the Bacillus cereus group efficiently, a multiplex PCR method using the gyrB and groEL genes as diagnostic markers is suggested for simultaneous detection. The assay yielded a 400 bp amplicon for the groEL gene from all the B. cereus group bacteria, and a 253 bp amplicon from B. anthracis, 475 bp amplicon from B. cereus, 299 bp amplicon from B. thuringiensis, and 604 bp amplicon from B. mycoides for the gyrB gene. No nonspecific amplicons were observed with the DNA from 29 other pathogenic bacteria. The specificity and sensitivity of the B. cereus group identification using this multiplex PCR assay were evaluated with different kinds of food samples. In conclusion, the proposed multiplex PCR is a reliable, simple, rapid, and efficient method for the simultaneous identification of B. cereus group bacteria from food samples in a single tube.     

Development of real-time PCR assays for detection and quantification of Bacillus cereus group species: differentiation of B. weihenstephanensis and rhizoid B. pseudomycoides isolates from milk

Quantitative real-time PCR (qRT-PCR) offers an alternative method for the detection of bacterial contamination in food. This method provides the quantitation and determination of the number of gene copies. In our study, we established an RT-PCR assay using the LightCycler system to detect and quantify the Bacillus cereus group species, which includes B. cereus, B. anthracis, B. thuringiensis, B. weihenstephanensis, B. mycoides, and B. pseudomycoides. A TaqMan assay was designed to detect a 285-bp fragment of the motB gene encoding the flagellar motor protein, which was specific for the detection of the B. cereus group species, excluding B. pseudomycoides, and the detection of a 217-bp gene fragment of a hypothetical protein specific only for B. pseudomycoides strains. Based on three hydrolysis probes (MotB-FAM-1, MotB-FAM-2, and Bpm-FAM-1), it was possible to differentiate B. weihenstephanensis from the B. cereus group species with nonrhizoid growth and B. pseudomycoides from the whole B. cereus group. The specificity of the assay was confirmed with 119 strains belonging to the Bacillus cereus group species and was performed against 27 other Bacillus and non-Bacillus bacteria. A detection limit was determined for each assay. The assays performed well not only with purified DNA but also with DNA extracted from milk samples artificially contaminated with bacteria that belong to the B. cereus group species. This technique represents an alternative approach to traditional culture methods for the differentiation of B. cereus group species and differentiates B. weihenstephanensis and B. pseudomycoides in one reaction.     

Deletion of the sigB gene in Bacillus cereus ATCC 14579 leads to hydrogen peroxide hyperresistance

The sigB gene of Bacillus cereus ATCC 14579 encodes the alternative sigma factor sigma(B). Deletion of sigB in B. cereus leads to hyperresistance to hydrogen peroxide. The expression of katA, which encodes one of the catalases of B. cereus, is upregulated in the sigB deletion mutant, and this may contribute to the hydrogen peroxide-resistant phenotype.     

PlcR在炭疽芽胞杆菌A16R中的功能研究

炭疽芽胞杆菌(Bacillus anthracis)、蜡样芽胞杆菌(B. cereus)和苏云金芽胞杆菌(B. thuringiensis)均属于蜡样芽胞杆菌群,在遗传学上有很高的相似性。PlcR (Phospholipase C regulator)在蜡样芽胞杆菌中是十分重要的调控因子,但plcR基因在炭疽芽胞杆菌中发生一个无义突变导致在炭疽芽胞杆菌中产生一个截短PlcR蛋白。为了研究plcR基因对炭疽芽胞杆菌功能的影响,文章以蜡样芽胞杆菌CMCC6330基因组为模板,构建重组表达质粒pBE2A-plcR后导入炭疽芽胞杆菌疫苗株A16R中获得重组菌株,对其进行表型分析。结果显示,炭疽芽胞杆菌重组菌株的溶血活性基本没有恢复,但恢复了部分神经鞘磷脂酶活性,表明将蜡样芽胞杆菌的plcR基因导入炭疽芽胞杆菌后,可以直接激活神经鞘磷脂酶活性。     

A randomly amplified polymorphic DNA marker specific for the Bacillus cereus group is diagnostic for Bacillus anthracis

Aiming to develop a DNA marker specific for Bacillus anthracis and able to discriminate this species from Bacillus cereus, Bacillus thuringiensis, and Bacillus mycoides, we applied the randomly amplified polymorphic DNA (RAPD) fingerprinting technique to a collection of 101 strains of the genus Bacillus, including 61 strains of the B. cereus group. An 838-bp RAPD marker (SG-850) specific for B. cereus, B. thuringiensis, B. anthracis, and B. mycoides was identified. This fragment included a putative (366-nucleotide) open reading frame highly homologous to the ypuA gene of Bacillus subtilis. The restriction analysis of the SG-850 fragment with AluI distinguished B. anthracis from the other species of the B. cereus group.     

Application of the multiplex PCR and PCR-RFLP method in the identification of the Bacillus anthracis

The aim of this study was to apply the multiplex PCR and PCR-RFLP method for the identification of the B. anthracis strains and to distinguish those bacteria from other members of the Bacillus cereus group. The multiplex PCR method enables to detect the virulence factors, i.e. the toxin and the capsule in B. anthracis strains. To do that, the authors have used 5 primer pairs specific for the fragments of lef, cya, pag genes which are present in the pXO1 plasmid and encode the toxin, the cap gene, which is present in the pXO2 plasmid and encodes the capsule, and the Ba813 chromosomal sequence. Among the four B. anthracis strains examined, three contained two plasmids and the Ba813 chromosomal sequence, while the fourth one contained the pXO1 plasmid only, together and the Ba813 chromosomal sequence. Other bacterial species, belonging to the B. cereus group, were also examined: 6 strains of B. cereus, 4 strains of B. thuringiensis and one strain of B. mycoides. The presence of Ba813 chromosomal sequence has been detected in two B. cereus strains. Neither plasmids nor Ba813 chromosomal sequence have been discovered in other B. cereus, B. thuringiensis and B. mycoides strains. The results of the survey indicate that the Ba813 chromosomal sequence does not occur solely in B. anthracis strains. The PCR-RFLP method with the use of SG-749f and SG-749r primers enabled to demonstrate the presence of DNA sequence (SG-749) in B. anthracis, B. cereus, B. thuringiensis and B. mycoides strains. Restriction analysis with enzyme AluI of the SG-749 sequence, has shown the presence of two DNA fragments at the size of about 90 and 660 bp in all B. anthracis strains. The restriction profile obtained was characteristic for B. anthracis strains and it did not occur in other investigated bacterial species belonging to the B. cereus group. It was not observed even in such B. cereus strains in which the presence of Ba813 sequence was discovered and it enabled to differentiate between B. anthracis strains and other closely related species of the B. cereus group.     

Evidence for non-ribosomal peptide synthetase production of cereulide (the emetic toxin) in Bacillus cereus

Little is known about the process whereby the emetic toxin (or cereulide) of Bacillus cereus is produced. Two cereulide-producing strains of B. cereus were cloned and sequenced following polymerase chain reaction (PCR) amplification with primers that were specific for conserved regions of non-ribosomal peptide synthetase (NRPS) genes. The cloned regions of the B. cereus strains were highly homologous to conserved regions of other peptide synthetase nucleotide sequences. Primers were designed for two variable regions of the NRPS gene sequence to ensure specificity for the emetic strains. A total of 86 B. cereus strains of known emetic or non-emetic activity were screened using these primers. All of the emetic strains (n=30) displayed a 188 bp band following amplification and gel electrophoresis. We have developed an improved method of identifying emetic strains of B. cereus and provided evidence that cereulide is produced by peptide synthetases.     

Primary structure of the oligo-1,6-glucosidase of Bacillus cereus ATCC7064 deduced from the nucleotide sequence of the cloned gene

The gene coding for Bacillus cereus ATCC7064 (mesophile) oligo-1,6-glucosidase was cloned within a 2.8-kb SalI-EcoRI fragment of DNA, using the plasmid pUC19 as a vector and Escherichia coli C600 as a host. E. coli C600 bearing the hybrid plasmid pBCE4 accumulated oligo-1,6-glucosidase in the cytoplasm. The cloned enzyme coincided absolutely with B. cereus oligo-1,6-glucosidase in its Mr (65,000), in its electrophoretic behavior on a polyacrylamide gel with or without sodium dodecyl sulfate, in its isoelectric point (4.5), in the temperature dependence of its stability and activity, and in its antigenic determinants. The nucleotide sequence of B. cereus oligo-1,6-glucosidase gene and its flanking regions was determined with both complementary strands of DNA (each 2838 nucleotides). The gene consisted of an open reading frame of 1674 bp commencing with a ATG start codon and followed by a TAA stop codon. The amino acid sequence deduced from the nucleotide sequence predicted a protein of 558 amino acid residues with a Mr of 66,010. The amino acid composition and Mr were comparable with those of B. cereus oligo-1,6-glucosidase. The predicted N-terminal sequence of 10 amino acid residues agreed completely with that of the cloned ligo-1,6-glucosidase. The deduced amino acid sequence of B. cereus oligo-1,6-glucosidase was 72% and 42% similar to those from Bacillus thermoglucosidasius KP1006 (DSM2542, obligate thermophile) oligo-1,6-glucosidase and from Saccharomyces carlsbergensis CB11 alpha-glucosidase, respectively. Predictions of protein secondary structures along with amino acid sequence alignments demonstrated that B. cereus oligo-1,6-glucosidase may take the similar (alpha/beta)8-barrel super-secondary structure, a barrel of eight parallel beta-strands surrounded by eight alpha-helices, in its N-terminal active site domain as S. carlsbergensis alpha-glucosidase and Aspergillus oryzae alpha-amylase.     

Cloning and sequencing of the metallothioprotein beta-lactamase II gene of Bacillus cereus 569/H in Escherichia coli

The structural gene for beta-lactamase II (EC 3.5.2.6), a metallothioenzyme, from Bacillus cereus 569/H (constitutive for high production of the enzyme) was cloned in Escherichia coli, and the nucleotide sequence was determined. This is the first class B beta-lactamase whose primary structure has been reported. The amino acid sequence of the exoenzyme form, deduced from the DNA, indicates that beta-lactamase II, like other secreted proteins, is synthesized as a precursor with a 30-amino acid N-terminal signal peptide. The pre-beta-lactamase II (Mr, 28,060) is processed in E. coli and in B. cereus to a single mature protein (Mr, 24,932) which is totally secreted by B. cereus but in E. coli remains intracellular, probably in the periplasm. The expression of the gene in E. coli RR1 on the multicopy plasmid pRWHO12 was comparable to that in B. cereus, where it is presumably present as a single copy. The three histidine residues that are involved (along with the sole cysteine of the mature protein) in Zn(II) binding and hence in enzymatic activity against beta-lactams were identified. These findings will help to define the secondary structure, mechanism of action, and evolutionary lineage of B. cereus beta-lactamase II and other class B beta-lactamases.     

Comparison of PCR-RFLP, ribotyping and ERIC-PCR for typing Bacillus anthracis and Bacillus cereus strains

PCR-RFLP analysis of the vrrA gene and cerAB gene was used to investigate the genomic diversity in 21 strains of Bacillus anthracis and 28 strains of Bacillus cereus, and was compared with results obtained by ribotyping and enterobacterial repetitive intergenic consensus-PCR (ERIC-PCR) analysis. VrrA-typing divided the B. anthracis into four groups. Except for one Pasteur vaccine strain, the vrrA PCR-RFLP profiles of the B. anthracis were separated into three groups, which were different from those of the B. cereus strains. Ribotyping separated the B. anthracis isolates into seven ribotypes, and a common fragment of an approximately 850 bp band from the ERIC-PCR fingerprints separated most B. anthracis strains into two groups. VrrA/cerAB PCR-RFLP, ribotyping and ERIC-PCR generated 18, 22 and 23 types, respectively, from B. cereus strains. The results suggest that a combination of all three methods provides a high resolution typing method for B. anthracis and B. cereus. Compared with ribotyping and ERIC-PCR, PCR-RFLP is simple to perform and has potential as a rapid method for typing and discriminating B. anthracis strains from other B. cereus group bacteria.     

Molecular cloning, overproduction and characterization of the Bacillus cereus IMP dehydrogenase

The gene of IMP dehydrogenase of Bacillus cereus ts-4, a temperature-sensitive mutant of B. cereus JCM 2152, was subcloned and its sequence was analyzed. A B. cereus ts-4 DNA fragment of 2,065 bp containing the entire impdh gene and flanking regions was sequenced. The fragment contained an open reading frame of 1,527 bp encoding 509 amino acids with a calculated molecular mass of 55,390 Da. The impdh sequence of JCM 2152 was also analyzed by TA cloning using PCR products amplified with primers from B. cereus ts-4 impdh gene. The gene amplified by PCR was expressed in Escherichia coli using a pET17 x b expression plasmid. The N-terminal amino acid sequence of the overproduced enzyme was identified as Met-Trp-Glu-Ser-Lys-Phe-Val-Lys-Glu-Gly-Leu-Thr-Phe-AspAsp-Val-Leu -Leu-Val- Pro. The overproduced enzyme was eluted at a molecular mass of about 225 kDa by gel filtration. The molecular mass of the subunit was estimated to be 56 kDa by SDS-PAGE. The overproduced enzyme was active against IMP, IDP, and ITP, and showed the highest activity at pH 9.5. These properties of the recombinant enzyme were almost identical to those of IMP dehydrogenase of B. cereus.