Biological treatment of shrimp production wastewater

Over the last few decades, there has been an increase in consumer demand for shrimp, which has resulted in its worldwide aquaculture production. In the United States, the stringent enforcement of environmental regulations encourages shrimp farmers to develop new technologies, such as recirculating raceway systems. This is a zero-water exchange system capable of producing high-density shrimp yields. The system also produces wastewater characterized by high levels of ammonia, nitrate, nitrite, and organic carbon, which make waste management costs prohibitive. Shrimp farmers have a great need for a waste management method that is effective and economical. One such method is the sequencing batch reactor (SBR). A SBR is a variation of the activated sludge biological treatment process. This process uses multiple steps in the same reactor to take the place of multiple reactors in a conventional treatment system. The SBR accomplishes equalization, aeration, and clarification in a timed sequence in a single reactor system. This is achieved through reactor operation in sequences, which includes fill, react, settle, decant, and idle. A laboratory scale SBR was successfully operated using shrimp aquaculture wastewater. The wastewater contained high concentrations of carbon and nitrogen. By operating the reactors sequentially, namely, aerobic and anoxic modes, nitrification and denitrification were achieved as well as removal of carbon. Ammonia in the waste was nitrified within 4 days. The denitrification of nitrate was achieved by the anoxic process, and 100% removal of nitrate was observed within 15 days of reactor operation.     

Microbial treatment of high-strength perchlorate wastewater

To treat wastewater containing high concentrations of perchlorate, a perchlorate reducing-bacterial consortium was obtained by enrichment culture grown on high-strength perchlorate (1200 mg L⁻¹) feed medium, and was characterized in a sequence batch reactor (SBR) over a long-time operation. The consortium removed perchlorate in the SBR with high reduction rates (35-90 mg L⁻¹ h⁻¹) and stable removal efficiency over 200-day operations. The maximum specific perchlorate reduction rate (q_max), half saturation constant (K_s), and optimal pH range were 0.67 mg-perchlorate mg-dry cell weight⁻¹ h⁻¹, 193.8 mg-perchlorate L⁻¹, and pH 7-9, respectively. The perchlorate reduction yield was 0.48 mol-perchlorate mol-acetate⁻¹. A clone library prepared using the amplicons of cld gene encoding chlorate dismutase showed that the dominant (per)chlorate reducing bacteria in the consortium were Dechlorosoma sp. (53%), Ideonella sp. (28%), and Dechloromonas sp. (19%).     

Paracoccus denitrificans SD1 mediated augmentation with indigenous mixed cultures for enhanced removal of N,N-dimethylformamide from industrial effluents

Bioaugmentation is an effective treatment method to reduce recalcitrant pollutants from polluted sites. Dimethylformamide (DMF) is a very common toxic organic solvent among the effluents of textile and pharma industries. DMF was degraded by pre-adapted Paracoccus denitrificans SD1 with indigenous mixed cultures in both bioaugmentation and non-bioaugmentation conditions. In free cell condition, augmentation was not much significant due to competition among the bacterial cells and direct exposure of cells to toxic level of DMF. To enhance the degradation of DMF, cells were entrapped in PVA–alginate matrix individually and collectively for bioaugmentation experiments. Bioaugmentation is successful when immobilized P. denitrificans SD1 is introduced higher inoculum volume with indigenous cultures in continuous packed bed reactor system. This treatment has succeeded in removing 91.3% of 3% (v/v) DMF from the industrial effluent. This investigation advocates that bioaugmentation enhances the DMF removal efficiency by about 20% when compared to individual degradation by P. denitrificans SD1.     

Effect of pH on the production of bacterial polyhydroxyalkanoates by mixed cultures enriched under periodic feeding

This research investigated the effect of pH on polyhydroxyalkanoate (PHA) production by mixed cultures enriched in a sequencing batch reactor (SBR) starting from activated sludge. The enrichment was performed with a mixture of acetic (85% on COD basis) and propionic (15%) acid, at an organic load rate of 8.5 gCOD/L/day over the range of pH from 7.5 to 9.5.The enriched cultures were all able to store the copolymer poly(3-hydroxybutyrate/3-hydroxyvalerate). Higher polymer production rates and yields (389 mg PHA (as COD)/g non-polymer biomass (as COD)/h and 0.53 COD/COD, respectively) were observed when the pH in the SBR was controlled at 7.5, with Lampropedia hyalina as the dominant bacterial species of the microbial community.PHA composition was also strongly affected by the pH. Indeed, batch tests showed that hydroxyvalerate (HV) content in the copolymer increased with increasing pH up to about 48% (mol/mol) at pH 9.5. Interestingly, the possibility of enhancing the HV content was also verified by performing batch tests at a more alkaline pH value than that in the SBR. In conclusion, this paper suggests that pH control is a main tool to tune HV content in the PHA, regardless of the feed composition.     

Remediation of Thiothrix spp. associated bulking problems by raw wastewater feeding: A full-scale experience

An industrial wastewater treatment plant (WWTP) in Australia has long suffered from bulking problems associated with the proliferation of Thiothrix spp. The WWTP consists of a covered anaerobic lagoon (CAL) followed by a sequencing batch reactor (SBR). The CAL functions as both an anaerobic digester and surge lagoon for the irregular flow of wastewater generated from the production of seasonal products. Chemical analysis of the raw influent showed it was composed of a mixture of organic acids, phenols and alcohols. The CAL effluent was characterised by high acetic acid and phenolic concentrations. An attempt was made to manipulate the SBR microbial community to improve settling by direct feeding small volumes of raw influent into the SBR. After raw feeding, the plant ceased bulking as the settled sludge volume reduced from 930 to 200 mL L^?1. 16S rRNA gene profiling and biovolumes of SBR samples revealed major changes in the microbial community. The Thiothrix spp. population decreased from 36.8% to 0.2%, and Zoogloea spp. dominated all samples after raw feeding. Therefore, direct feeding is proposed as a control method for industrial plants with surge/anaerobic lagoons in order to manage the bulking problems caused by Thiothrix spp. in downstream SBRs.     

Impact of Substratum Surface on Microbial Community Structure and Treatment Performance in Biological Aerated Filters

The impact of substratum surface property change on biofilm community structure was investigated using laboratory biological aerated filter (BAF) reactors and molecular microbial community analysis. Two substratum surfaces that differed in surface properties were created via surface coating and used to develop biofilms in test (modified surface) and control (original surface) BAF reactors. Microbial community analysis by 16S rRNA gene-based PCR-denaturing gradient gel electrophoresis (DGGE) showed that the surface property change consistently resulted in distinct profiles of microbial populations during replicate reactor start-ups. Pyrosequencing of the bar-coded 16S rRNA gene amplicons surveyed more than 90% of the microbial diversity in the microbial communities and identified 72 unique bacterial species within 19 bacterial orders. Among the 19 orders of bacteria detected, Burkholderiales and Rhodocyclales of the Betaproteobacteria class were numerically dominant and accounted for 90.5 to 97.4% of the sequence reads, and their relative abundances in the test and control BAF reactors were different in consistent patterns during the two reactor start-ups. Three of the five dominant bacterial species also showed consistent relative abundance changes between the test and control BAF reactors. The different biofilm microbial communities led to different treatment efficiencies, with consistently higher total organic carbon (TOC) removal in the test reactor than in the control reactor. Further understanding of how surface properties affect biofilm microbial communities and functional performance would enable the rational design of new generations of substrata for the improvement of biofilm-based biological treatment processes.     

Microbial sulfate reduction with acetate: process performance and composition of the bacterial communities in the reactor at different salinity levels

Microbial sulfate reduction with acetate as carbon source and electron donor was investigated at salinity levels between 0.53 and 1.48%. The experiment was carried out in a 2.3-1 upflow anaerobic sludge blanket reactor inoculated with granular methanogenic sludge. A pH of 8.3, a temperature of 32 +/- 1 degrees C and a chemical oxygen demand (COD)/SO4(2-)-S ratio of 2 were maintained in the reactor throughout the experiment. Sulfate reduction and the composition of the dominant bacterial communities in the reactor were monitored. The results showed that a maximal conversion rate for SO4(2-)-S of 14 g l(-1) day(-1) and a conversion efficiency of more than 90% were obtained at a salinity level of 1.26-1.39%. A further increase in the salinity level led to reactor instability. Denaturant gradient gel electrophoresis of 16S rDNA fragments amplified by PCR from total bacterial DNA extracted from the inoculum and reactor sludge showed that salinity level had an impact on the composition of the bacterial communities in the reactor. However, no clear relationship was found between reactor performance and the composition of the dominant bacterial communities in the reactor.     

Treatability of cheese whey for single-cell protein production in nonsterile systems: Part I. Optimal condition for lactic acid fermentation using a microaerobic sequencing batch reactor (microaerobic SBR) with immobilized Lactobacillus plantarum TISTR 2265 and microbial communities

Cheese whey contains a high organic content and causes serious problems if it is released into the environment when untreated. This study aimed to investigate the optimum condition of lactic acid production using the microaerobic sequencing batch reactor (microaerobic SBR) in a nonsterile system. The high production of lactic acid was achieved by immobilized Lactobacillus plantarum TISTR 2265 to generate an acidic pH condition below 4.5 and then to support single-cell protein (SCP) production in the second aerobic sequencing batch reactor (aerobic SBR). A hydraulic retention time (HRT) of 4 days and a whey concentration of 80% feeding gave a high lactic acid yield of 12.58 g/L, chemical oxygen demand (COD) removal of 62.38%, and lactose utilization of 61.54%. The microbial communities in the nonsterile system were dominated by members of lactic acid bacteria, and it was shown that the inoculum remained in the system up to 330 days.     

Quantifying Community Dynamics of Nitrifiers in Functionally Stable Reactors

A sequential batch reactor (SBR) and a membrane bioreactor (MBR) were inoculated with the same sludge from a municipal wastewater treatment plant, supplemented with ammonium, and operated in parallel for 84 days. It was investigated whether the functional stability of the nitrification process corresponded with a static ammonia-oxidizing bacterial (AOB) community. The SBR provided complete nitrification during nearly the whole experimental run, whereas the MBR showed a buildup of 0 to 2 mg nitrite-N liter⁻¹ from day 45 until day 84. Based on the denaturing gradient gel electrophoresis profiles, two novel approaches were introduced to characterize and quantify the community dynamics and interspecies abundance ratios: (i) the rate of change [Δ_t(week)] parameter and (ii) the Pareto-Lorenz curve distribution pattern. During the whole sampling period, it was observed that neither of the reactor types maintained a static microbial community and that the SBR evolved more gradually than the MBR, particularly with respect to AOB (i.e., average weekly community changes of 12.6% ± 5.2% for the SBR and 24.6% ± 14.3% for the MBR). Based on the Pareto-Lorenz curves, it was observed that only a small group of AOB species played a numerically dominant role in the nitritation of both reactors, and this was true especially for the MBR. The remaining less dominant species were speculated to constitute a reserve of AOB which can proliferate to replace the dominant species. The value of these parameters in terms of tools to assist the operation of activated-sludge systems is discussed.     

The microbial community in a moving bed biotrickling filter operated to remove hydrogen sulfide from gas streams

The information available on the microbial communities responsible for pollutant degradation is increasingly accessible. Its use to optimize process design and operation is an important challenge in the field of effluent treatment research. Therefore, a prototype of a moving bed biotrickling filter (MBBTF) reactor was designed and, for the first time, operated at full-scale for the removal of sulfides desorbing from tannery industrial wastewater. The bacterial community operating in this innovative reactor was studied, and its composition and response to different operating conditions were characterized. A stable biomass, dominated by sulfur-oxidizing bacteria of the genus Acidithiobacillus was selected from inside the MBBTF reactor, and temperature, pH and bed rotation were shown to be the main factors driving the community structure. Moreover, data from different approaches indicated an uneven spatial distribution of biofilm inside the studied reactor, due to the combined effect of fluid dynamics and substrate gradients within the bed volume. Despite the high removal efficiency achieved by this innovative prototype (80% on average), the data suggested that the result could be improved by adopting solutions for a more stable and even biofilm distribution. It was shown that short frequent bed rotations, rather than long scattered rotations, ensured biomass stability. Furthermore, diversifying biofilm support media as a function of expected local pollutant concentrations should be considered. Data obtained from the bacterial community can therefore provide indications for possible further improvement of MBBTF reactor design and performance.     

pH Tolerance in Freshwater Bacterioplankton: Trait Variation of the Community as Measured by Leucine Incorporation

pH is an important factor determining bacterial community composition in soil and water. We have directly determined the community tolerance (trait variation) to pH in communities from 22 lakes and streams ranging in pH from 4 to 9 using a growth-based method not relying on distinguishing between individual populations. The pH in the water samples was altered to up to 16 pH values, covering in situ pH ± 2.5 U, and the tolerance was assessed by measuring bacterial growth (Leu incorporation) instantaneously after pH adjustment. The resulting unimodal response curves, reflecting community tolerance to pH, were well modeled with a double logistic equation (mean R² = 0.97). The optimal pH for growth (pH_opt) among the bacterial communities was closely correlated with in situ pH, with a slope (0.89 ± 0.099) close to unity. The pH interval, in which growth was ≥90% of that at pH_opt, was 1.1 to 3 pH units wide (mean 2.0 pH units). Tolerance response curves of communities originating from circum-neutral pH were symmetrical, whereas in high-pH (8.9) and especially in low-pH (<5.5) waters, asymmetric tolerance curves were found. In low-pH waters, decreasing pH was more detrimental for bacterial growth than increasing pH, with a tendency for the opposite for high-pH waters. A pH tolerance index, using the ratio of growth at only two pH values (pH 4 and 8), was closely related to pH_opt (R² = 0.83), allowing for easy determination of pH tolerance during rapid changes in pH.     

Spatial distribution of major bacterial species and different volatile fatty acids in a two-phase anaerobic biofilm reactor with PVA gel beads as bio-carrier

Abstract

Conventional completely mixed anaerobic treatment systems limit the chances of the different species of bacteria to spatially group together according to their mutual cooperation and as a result, show a lower efficiency and vulnerability towards shock situations. It is interesting to know about the stratification of the different bacterial species participating in the degradation process and the intermediates that they produce. In this study, we established and optimized a two-phase anaerobic packed bed biofilm reactor system (AnPBR) with porous PVA gel beads used as bio-carriers and ran the reactor system in a steady state to observe the VFAs produced along with the microbial diversity of the predominant species at different stages of the reactor system. We observed that acetate and butyrate were the predominant intermediate VFAs while concentrations of other VFAs such that propionic acid were low. Acetobacterium and Clostridium were found to be the most abundant bacterial species in acidogenic reactor while methanogenic reactor was highly enriched with Methanobacterium and Methanosarcina. Apart from the above, syntrophic populations such as Syntrophobactor wolinii were also observed to be dominant in both the reactors – especially towards the end of acidogenic reactor and the initial part of the methanogenic reactor.     

Performance of enhanced biological SBR process for aniline treatment by mycelial pellet as biomass carrier

Mycelial pellet of Aspergillus niger Y3 was used as a biomass carrier to immobilize the aniline-degrading bacterium, Acinetobacter calcoaceticus JH-9 and the mix culture of the COD rapid degradation bacteria. In order to investigate its removal effect on aniline and COD, the combined mycelial pellets were applied in the SBR. Comparison of the performances was conducted between another SBR inoculated with sole strain JH-9 and the above SBR. The results showed that the stable degradations of aniline and COD were observed in both reactors. In the SBR with combined mycelial pellet, the biological removal efficiency was about 0.9 mg aniline/(L·d). It was much higher than that in the activated sludge reactor. Meanwhile, the performances of the sedimentation velocity, liquid-solid phase separation and the effluent quality were better in the SBR. According to SEM images and PCR-DGGE analysis, the species immobilized on the biomass carrier were more predominant in this system.     

Preparation of PVA/chitosan lipase membrane reactor and its application in synthesis of monoglyceride

Polyvinyl alcohol (PVA)/chitosan (CS) composite lipase membrane was prepared in this paper, which was used for enzymatic processing of fats and oils. The parameters, such as concentration of lipase, pH, and cross-linking agent as well as metal ions, which influence the immobilization of lipase in membrane, were optimized. The immobilized activity of lipase was 2.64 IU/cm² with recovery of 24%. The membrane reactor was used in a two-phase system reaction to synthesize monoglyceride (MG) by hydrolysis of palm oil, which was reused for at least nine batches with yield of 32–50%.     

Removal of phosphate in a sequencing batch reactor by Staphylococcus auricularis

A sequencing batch reactor (SBR) was used to remove phosphate in biological wastewater treatment as an alternative to the activated sludge process, in order to improve the low removal efficiency of phosphate and the operational instability. After a cycle of 2 h anaerobic and 4 h aerobic conditions, phosphate removal was optimized. The removal efficiencies of 5 and 50 mg phosphate l^–1 by Staphylococcus auricularis under repeated anaerobic and aerobic conditions were above 90%. These results showed that a long adaptation time, one of the major problems in biological phosphate removal process, was overcome by SBR.     

Biological treatment of eucalypt spent sulphite liquors: a way to boost the production of second generation bioethanol

The fermentation of reducing sugars from hardwood (eucalypt) spent sulphite liquor (HSSL) into ethanol by Pichia (Scheffersomyces) stipitis is hindered by concomitant inhibitors of microbial metabolism. The conditions for the HSSL biological treatment step by Paecilomyces variotii were evaluated and optimised. Two different strategies of reactor operation were compared using single batch (B) and sequential batch reactor (SBR). Biological treatment of HSSL in the SBR revealed the best results with respect to the removal of microbial inhibitors. Also, most of inhibitory compounds, acetic acid, gallic acid, pyrogallol, amongst others, were removed from HSSL by P. variotii before the ethanol fermentation. The bio-detoxified HSSL was subjected to a successful fermentation by P. stipitis, attaining a maximum ethanol concentration of 2.4 g L⁻¹ with a yield of 0.24 g ethanol g sugars⁻¹.     

Effect of Bacillus mesonae H20-5 Treatment on Rhizospheric Bacterial Community of Tomato Plants under Salinity Stress

Plant growth-promoting bacteria improve plant growth under abiotic stress conditions. However, their effects on microbial succession in the rhizosphere are poorly understood. In this study, the inoculants of Bacillus mesonae strain H20-5 were administered to tomato plants grown in soils with different salinity levels (EC of 2, 4, and 6 dS/m). The bacterial communities in the bulk and rhizosphere soils were examined 14 days after H20-5 treatment using Illumina MiSeq sequencing of the bacterial 16S rRNA gene. Although the abundance of H20-5 rapidly decreased in the bulk and rhizosphere soils, a shift in the bacterial community was observed following H20-5 treatment. The variation in bacterial communities due to H20-5 treatment was higher in the rhizosphere than in the bulk soils. Additionally, the bacterial species richness and diversity were greater in the H20-5 treated rhizosphere than in the control. The composition and structure of the bacterial communities varied with soil salinity levels, and those in the H20-5 treated rhizosphere soil were clustered. The members of Actinobacteria genera, including Kineosporia, Virgisporangium, Actinoplanes, Gaiella, Blastococcus, and Solirubrobacter, were enriched in the H20-5 treated rhizosphere soils. The microbial co-occurrence network of the bacterial community in the H20-5 treated rhizosphere soils had more modules and keystone taxa compared to the control. These findings revealed that the strain H20-5 induced systemic tolerance in tomato plants and influenced the diversity, composition, structure, and network of bacterial communities. The bacterial community in the H20-5 treated rhizosphere soils also appeared to be relatively stable to soil salinity changes.     

Link between microbial composition and carbon substrate-uptake preferences in a PHA-storing community

The microbial community of a fermented molasses-fed sequencing batch reactor (SBR) operated under feast and famine conditions for production of polyhydroxyalkanoates (PHAs) was identified and quantified through a 16 S rRNA gene clone library and fluorescence in situ hybridization (FISH). The microbial enrichment was found to be composed of PHA-storing populations (84% of the microbial community), comprising members of the genera Azoarcus, Thauera and Paracoccus. The dominant PHA-storing populations ensured the high functional stability of the system (characterized by high PHA-storage efficiency, up to 60% PHA content). The fermented molasses contained primarily acetate, propionate, butyrate and valerate. The substrate preferences were determined by microautoradiography-FISH and differences in the substrate-uptake capabilities for the various probe-defined populations were found. The results showed that in the presence of multiple substrates, microbial populations specialized in different substrates were selected, thereby co-existing in the SBR by adapting to different niches. Azoarcus and Thauera, primarily consumed acetate and butyrate, respectively. Paracoccus consumed a broader range of substrates and had a higher cell-specific substrate uptake. The relative species composition and their substrate specialization were reflected in the substrate removal rates of different volatile fatty acids in the SBR reactor.     

Responses of Bacterial Communities in Arable Soils in a Rice-Wheat Cropping System to Different Fertilizer Regimes and Sampling Times

Soil physicochemical properties, soil microbial biomass and bacterial community structures in a rice-wheat cropping system subjected to different fertilizer regimes were investigated in two seasons (June and October). All fertilizer regimes increased the soil microbial biomass carbon and nitrogen. Both fertilizer regime and time had a significant effect on soil physicochemical properties and bacterial community structure. The combined application of inorganic fertilizer and manure organic-inorganic fertilizer significantly enhanced the bacterial diversity in both seasons. The bacterial communities across all samples were dominated by Proteobacteria, Acidobacteria and Chloroflexi at the phylum level. Permutational multivariate analysis confirmed that both fertilizer treatment and season were significant factors in the variation of the composition of the bacterial community. Hierarchical cluster analysis based on Bray-Curtis distances further revealed that bacterial communities were separated primarily by season. The effect of fertilizer treatment is significant (P = 0.005) and accounts for 7.43% of the total variation in bacterial community. Soil nutrients (e.g., available K, total N, total P and organic matter) rather than pH showed significant correlation with the majority of abundant taxa. In conclusion, both fertilizer treatment and seasonal changes affect soil properties, microbial biomass and bacterial community structure. The application of NPK plus manure organic-inorganic fertilizer may be a sound fertilizer practice for sustainable food production.     

Effective anaerobic treatment of fresh leachate from MSW incineration plant and dynamic characteristics of microbial community in granular sludge

We investigated the treatment of fresh leachate from municipal solid waste incineration plants with high-strength organics using a lab-scale expanded granular sludge bed (EGSB) reactor. The reactor was operated at a mesophilic temperature (33 °C) for 118 days. The influent chemical oxygen demand (COD) of the leachate gradually increased to over 70,000 mg/L, and the organic loading rate increased to 18 kg COD/(m³?day). An average COD removal efficiency of 86.7 % was achieved when the reactor was fed with raw leachate, which suggests the feasibility of the EGSB process for leachate treatment. The microbial communities in the sludge from the reactor during the trial operation were constructed by denaturing gradient gel electrophoresis, clone libraries, and real-time quantitative polymerase chain reaction. The dominant group for archaea was Methanosaeta, with 68.4 % proportion at the start of the operation, and then changed to Methanosarcina, with a proportion of 62.3 %, after 118 days of operation. The dominant group of eubacteria was confirmed to be Firmicutes throughout the operation process, with the proportion increasing from >50 to 81.2 %. Almost all the operational taxonomic units of Firmicutes belonged to the order Clostridiales, with characteristic spore formation. The microbial diversity of the population was low under raw leachate as feed in the reactor. The dynamics of the microbial community in the anaerobic granular sludge was discussed relating with the operating status of the EGSB reactor.