Determination of β-blockers in pharmaceutical and human urine by capillary electrophoresis with electrochemiluminescence detection and studies on the pharmacokinetics

A novel method for simultaneous determination of atenolol, metoprolol and esmolol was proposed by capillary electrophoresis (CE) separation and electrochemiluminescence (ECL) detection. Poly-β-cyclodextrin (Poly-β-CD) was used as an additive in the running buffer to improve the separation of three analytes. The conditions for CE separation, ECL detection and effect of Poly-β-CD were investigated in detail. The three β-blockers with very similar structures were well separated and detected under the optimum conditions. The linear ranges of the standard solution for atenolol and esmolol were 2.5-125 μmol/L with a detection limit (S/N=3) of 0.5 μmol/L, and for metoprolol was 0.5-25 μmol/L with a detection limit of 0.1 μmol/L. For three β-blockers from spiked aqueous and urine samples, the accuracy and precision including intraday and interday experiments were performed by calculating the recovery, the relative standard deviations of the ECL intensity and the migration time, respectively. The developed method was applied to the determination of metoprolol content in commercial pharmaceutical, and the analytical results are in good agreement with the nominal value with recoveries in the range of 98.7-105%. The proposed method was also applied to the monitoring of pharmacokinetics for metoprolol in human body.     

Determination of metformin hydrochloride using precolumn derivatization with acetaldehyde and capillary electrophoresis coupled with electrochemiluminescence

A novel method was developed using capillary electrophoresis (CE) coupled with tris(2,2′‐bipyridyl)ruthenium(II) electrogenerated chemiluminescence (ECL) for highly sensitive detection of metformin hydrochloride (MH) derivatizatized with acetaldehyde. The precolumn derivatization of MH with acetaldehyde was performed in phosphate buffer solution (0.3 mol/L, pH 7.5) at room temperature for 120 min. The effects of acetaldehyde concentration, buffer pH, electrokinetic voltage and injection time were investigated. Under optimized detection conditions, the MH ECL detection sensitivity was more than 120 times that without derivatization. The linear concentration range for MH was 0.001–15.00 μg/mL (with a correlation coefficient of 0.9992). The detection limit was 0.31 ng/mL with a signal:noise ratio of 3. The recoveries of MH in human urine were in the range 98.50–99.72%. Copyright © 2011 John Wiley & Sons, Ltd.     

Highly sensitive determination of N-terminal prolyl dipeptides, proline and hydroxyproline in urine by high-performance liquid chromatography using a new fluorescent labelling reagent, 4-(5,6-dimethoxy-2-phthalimidinyl)-2-methoxyphenylsulfonyl chloride

A highly sensitive pre-column HPLC method for simultaneous determination of prolyl dipeptides, Pro and Hyp in urine was developed. The analytes were labelled with 4-(5,6-dimethoxy-2-phthalimidinyl)-2-methoxyphenylsulfonyl chloride at 70°C for 20 min. The derivatives separated on tandem reversed-phase columns by a gradient elution and were monitored with fluorescence detection at 318 nm (excitation) and 392 nm (emission). The detection limits for prolyl dipeptides, Pro and Hyp were 1–5 fmol/injection (S/N=3). Urine samples were treated with o-phthalaldehyde, followed by purification on a Bond Elut C₁₈ column before conducting the labelling reaction. Pro–Hyp, Pro–Gly and Pro–Pro were identified as prolyl dipeptides in urine. The within-day and between-day relative standard deviations were 1.5–4.8 and 1.7–5.8%, respectively. The concentrations of Pro–Hyp, Pro–Gly, Pro–Pro, Pro and Hyp in normal human urine were 97.6±28.2, 2.74±1.48, 2.08±1.13, 6.71±3.34 and 2.30±1.59 nmol/mg creatinine, respectively.     

Capillary electrophoresis coupled with end‐column electrochemiluminescence for the determination of ephedrine in human urine,and a study of its interactions with three proteins

A tris(2,2‐bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺)‐based electrochemiluminescence (ECL) detection coupled with capillary electrophoresis (CE) method has been established for the sensitive determination of ephedrine for the first time. Under the optimized conditions [ECL detection at 1.15 V, 25 mmol/L phosphate buffer solution (PBS), pH 8.0, as running buffer, separation voltage 12.5 kV, 5 mmol/L Ru(bpy)₃²⁺ with 60 mmol/L PBS, pH 8.5, in the detection cell] linear correlation (r = 0.9987) between ECL intensity and ephedrine concentration was obtained in the range 6.0 × 10^–8–6.0 × 10^–6 g/mL. The detection limit was 4.5 × 10^–9 g/mL (S:N = 3). The developed method was successfully applied to the analysis of ephedrine in human urine and the investigation of its interactions with three proteins, including bovine serum albumin (BSA), cytochrome C (Cyt‐C) and myoglobin (Mb). The number of binding sites and the binding constants between ephedrine and BSA, Cyt‐C and Mb were 8.52, 12.60, 10.66 and 1.55 × 10⁴ mol/L, 6.58 × 10³ mol/L and 1.59 × 10⁴ mol/L, respectively. Copyright © 2011 John Wiley & Sons, Ltd.     

Determination of norfloxacin using a terbium-sensitized electrogenerated chemiluminescence method.

A simple electrogenerated chemiluminescence (ECL) analysis method for the determination of norfloxacin (NFLX) is reported. It is based on ECL produced by Na(2)SO(3), which is sensitized by the Tb-NFLX complex. The relative ECL intensity of the Tb(3+)-NFLX-Na(2)SO(3) system is proportional to the amount of NFLX. The optimized experimental conditions were investigated. The linear range and detection limit for NFLX were 1.0 x 10(-10)-8.0 x 10(-7) mol/L and 2.8 x 10(-11) mol/L, respectively. This method was successfully applied to the determination of NFLX in a capsule. NFLX in urine can be directly detected without pretreatment or separation.     

Determination of arecoline in areca nut based on field amplification in capillary electrophoresis coupled with electrochemiluminescence detection

A sensitive capillary electrophoresis–electrochemiluminescence (CE–ECL) assay with an ionic liquid (IL) was developed for the determination of arecoline in areca nut. The IL, 1‐butyl‐3‐methylimidazolium tetrafluoroborate (BMImBF₄), was an effective additive improved not only the separation selectivity but also the detection sensitivity of the analyte. BMImBF₄ in the separation electrolyte made the resistance of the separation buffer much lower than that of the sample solution, which resulted in an enhanced field amplified electrokinetic injection CE. ECL intensity of arecoline is about two times higher than that of the analyte with phosphate–IL buffer system. Resolution between arecoline and other unknown compounds in real samples was improved. Under the optimized conditions (ECL detection at 1.2 V, 16 kV separation voltage, 20 mmol/L phosphate with 10 mmol/L BMImBF₄ buffer at pH 7.50, 5 mmol/L Ru(bpy)₃²⁺ and 50 mmol/L phosphate buffer in the detection reservoir), a detection limit of 5 × 10^–9 mol/L for arecoline was obtained. Relative standard deviations of the ECL intensity and the migration time were 4.51% and 0.72% for arecoline. This method was successfully applied to determination of the amount of arecoline in areca nut within 450 s. Copyright © 2012 John Wiley & Sons, Ltd.     

Fluorometric determination of N-terminal prolyl dipeptides, proline and hydroxyproline in human serum by pre-column high-performance liquid chromatography using 4-(5,6-dimethoxy-2-phthalimidinyl)-2-methoxyphenylsulfonyl chloride

A highly sensitive HPLC method for the determination of prolyl dipeptides, Pro and Hyp in serum was developed. After deproteinization of serum and pretreatment with o-phthalaldehyde, the analytes were derivatized with 4-(5,6-dimethoxy-2-phthalimidinyl)-2-methoxyphenylsulfonyl chloride at 70°C for 10 min. The fluorescent derivatives of prolyl dipeptides, Pro and Hyp, were separated on tandem reversed-phase columns by a gradient elution at 55°C and detected by fluorescence measured at 318 nm (excitation) and 392 nm (emission). The detection limits for prolyl dipeptides were 2–5 fmol/injection (S/N=3). Pro–Hyp, Pro–Gly and Pro–Pro were identified as serum prolyl dipeptides. The within-day and between-day relative standard deviations were 1.5–7.9 and 2.4–10.8%, respectively. The recoveries were in the range of 90.8–97.3%. The concentrations of Pro–Hyp, Pro–Gly, Pro–Pro, Pro and Hyp in normal human serum (n=10) were 0.64±0.35, 0.078±0.047, 0.022±0.016, 177.0±43.0 and 11.1±3.5 μM, respectively. The concentrations of Pro–Hyp and Pro–Pro in serum of a patient with bone metastases of prostatic cancer were about three times and 50 times, respectively, higher than those in normal human serum.     

Optimum conditions of autoclaving for hydrolysis of proteins and urinary peptides of prolyl and hydroxyprolyl residues and HPLC analysis

A method for urinary peptide(s) and protein hydrolysis, involving autoclaving at 15psi (121 degrees C) for 60min, is described. Using three candidate proteins (bovine serum albumin, casein and gelatin) and urine specimens, the effect of autoclaving with respect to the optimum time required for hydrolysis under both acidic (6N HCl) and alkaline (6N KOH) conditions was studied. Recoveries of total amino acids from proteins and urine hydrolysate(s) suggest that complete hydrolysis of proteins and urinary peptides could be achieved by autoclaving for 30-60min instead of 16h of incubation at 110 degrees C. Further, stability of some of the individual amino acids was also studied. The observed differential stability of amino acids under acidic and alkaline conditions, as demonstrated in this study by HPLC analysis, makes it imperative to choose the appropriate hydrolytic condition while studying the composition of any given amino acids in urinary peptide(s)/protein hydrolysates. Further, the finding that both Pro and Hyp were stable under alkaline conditions of hydrolysis by autoclaving renders this method suitable for assaying these two amino acids from urine hydrolysates, hence its utility in the study of urinary peptide derived Hyp and Pro in bone/cartilage disorders.     

Establishment and Evaluation of the Novel Tetramethylammonium‐L‐Hydroxyproline Chiral Ionic Liquid Synergistic System Based on Clindamycin Phosphate for Enantioseparation by Capillary Electrophoresis

Much attention has been paid to chiral ionic liquids (ILs) in analytical chemistry, especially its application in capillary electrophoresis (CE) enantioseparation. However, the investigation of chiral ionic liquids synergistic systems based on antibiotic chiral selectors has been reported in only one article. In this work, a novel chiral ionic liquid, tetramethylammonium‐L‐hydroxyproline (TMA‐L‐Hyp), was applied for the first time in CE chiral separation to evaluate its potential synergistic effect with clindamycin phosphate (CP) as the chiral selector. As observed, significantly improved separation was obtained in this TMA‐L‐Hyp/CP synergistic system compared to TMA‐L‐Hyp or a CP single system. Several primary factors that might influence the separation were investigated, including CP concentration, TMA‐L‐Hyp concentration, buffer pH, types and concentrations of organic modifier, applied voltage, and capillary temperature. The best results were obtained with a 40 mM borax buffer (pH 7.6) containing 30 mM TMA‐L‐Hyp, 80 mM CP, and 20% (v/v) methanol, while the applied voltage and temperature were set at 20 kV and 20°C, respectively. Chirality 27:598–604, 2015. © 2015 Wiley Periodicals, Inc.     

Electrochemiluminescence detection with integrated indium tin oxide electrode on electrophoretic microchip for direct bioanalysis of lincomycin in the urine

In this article, an antibiotic, lincomycin was determined in the urine sample by microchip capillary electrophoresis (CE) with integrated indium tin oxide (ITO) working electrode based on electrochemiluminescence (ECL) detection. This microchip CE-ECL system can be used for the rapid analysis of lincomycin within 40s. Under the optimized conditions, the linear range was obtained from 5 to 100 microM with correlation coefficient of 0.998. The limit of detection (LOD) of 3.1 microM was obtained for lincomycin in the standard solution. We also applied this method to analyzing lincomycin in the urine matrix. The limit of detection of 9.0 microM was obtained. This method can determine lincomycin in the urine sample without pretreatment, which demonstrated that it is a promising method of detection of lincomycin in clinical and pharmaceutical area.     

Determination of ranitidine in urine by capillary electrophoresis-electrochemiluminescent detection

The fast analysis of ranitidine is of clinical importance in understanding its efficiency and a patient's treatment history. In this paper, a novel determination method for ranitidine based on capillary electrophoresis-electrochemiluminescence detection is described. The conditions affecting separation and detection were investigated in detail. End-column detection of ranitidine in 5 mM Ru(bpy)(3)(2+) solution at applied voltage of 1.20 V was performed. Favorable ECL intensity with higher column efficiency was achieved by electrokinetic injection for 10s at 10 kV. The R.S.D. values of ECL intensity and migration time were 6.38 and 1.84% for 10(-4) M and 6.01 and 0.60% for 10(-5) M, respectively. A detection limit of 7 x 10(-8) M (S/N=3) was achieved. The proposed method was applied satisfactorily to the determination of ranitidine in urine in 6 min.     

High-sensitivity capillary electrophoresis determination of inorganic anions in serum and urine using on-line preconcentration by transient isotachophoresis

Concentrations of inorganic anions, both as individual species and biotransformation products, in physiological fluids are of strong concern in clinical studies. To date, analytical methodologies have either required different analytical procedures to determine these analytes in plasma and urine, or extensive sample preparation, or unconventional and often expensive detection schemes, or both. A simple and sensitive capillary electrophoresis (CE) method with direct UV detection was developed for the simultaneous determination of iodide, bromide and nitrate in human plasma and urine, with a special focus on reliable quantification of the trace serum iodide. With the latter objective, the method incorporates a transient isotachophoresis (tITP) procedure enabling an efficient on-line preconcentration of iodide (limit of detection, 1.4 microg l(-1)) as well as other moderately mobile analytes that fall into the tITP range. The analyses of both types of biofluids were performed using an acidic electrolyte system composed of 0.25 mol l(-1) sodium chloride and 7.5 mmol l(-1) cetyltrimethylammonium chloride at pH 2.2 and 0.5 mol l(-1) 2-(N-morpholino)ethanesulfonate (pH 6.0) as terminating electrolyte. Relative standard deviations (R.S.D.) below 3.0% and 9.2% were obtained for within-day and between-day precision, respectively. Resolution and quantification of oxalic acid was also feasible under optimized tITP-CE conditions. Sample preparation required only ultrafiltration (serum) and dilution (urine). A number of plasma and urine samples were evaluated with this assay and the iodide, bromide and nitrate concentrations were in the expected clinical concentration ranges.     

Determination of erythromycin in rat plasma with capillary electrophoresis-electrochemiluminescence detection of tris(2,2'-bipyridyl) ruthenium(II)

A fast and sensitive approach for determination of erythromycin in rat plasma was described. The method used capillary electrophoresis coupled with end-column electrochemiluminescence (ECL) detection of Ru(bpy)(3)(2+). The separation column used had an inner diameter of 75 microm. The running buffer was 15 mmol/L sodium phosphate (pH=7.5). The solution in the detection cell was 50 mmol/L sodium phosphate (pH=8.0) and 5 mmol/L Ru(bpy)(3)(2+). ECL intensity varied linearly with erythromycin concentration from 1.0 ng/mL to 10 microg/mL. The detection limit (S/N=3) was 0.35 ng/mL. The relative standard deviations, of ECL intensity and migration time for eight consecutive injections of 1.0 microg/mL erythromycin (n=8), were 1.3% and 1.8%, respectively. The method was successfully applied to erythromycin determination in rat plasma. The recovery ranged from 92.5 to 97.5%.     

Simultaneous determination of 2-naphthol and 1-hydroxy pyrene in urine by gas chromatography-mass spectrometry

A gas chromatography-mass spectrometric (GC-MS) method was developed for the determination of 2-naphthol (2-NAP) and 1-hydroxypyrene (1-HOP) in human urine. Extraction from urine after the enzyme hydrolysis with β-glucuronidase/arylsulfatase was achieved with a liquid extraction using 5 mL of pentane. After addition of 50 μL of N-methyl-N-(tert-butyldimethylsilyl) trifluoroacetamide (MTBDMSTFA) to prevent the loss of 2-NAP during drying, the extract was completely dried and derivatized with MTBDMSTFA for 30 min at 60 °C. The accuracies were in the range of 96-109% at a concentration of 0.5, 10 and 25 μg/L and their precisions were less than 15%. Method detection limits of 2-NAP and 1-HOP were 0.07 and 0.01 μg/L, respectively. This method was used to analyze twenty urine samples, and they were found in the concentration range <0.07-13.7 μg/L (2-NAP) and <0.01-0.88 μg/L (1-HOP). The concentrations of 2-NAP and 1-HOP were well correlated to those of naphthalene and pyrene in blood, respectively.     

Determination of folic acid by high‐performance liquid chromatography with direct electrogenerated chemiluminescence reaction

In our present work, it was found that the electrooxidation of folic acid (FA) was accompanied by electrogenerated chemiluminescence (ECL) emission. Out of the four inorganic salts, NaNO₃ solution was found to be a suitable supporting electrolyte for the ECL emission of FA. Coupled with high‐performance liquid chromatography separation, this simple ECL method was used for post‐column determination of FA. Under the optimal conditions, the ECL intensity has a linear relationship with the concentration of FA in the range of 1.0 × 10^?7 to 1.0 × 10^?5 g/mL and the detection limit was 5 × 10^?8 g/mL (signal‐to‐noise ratio = 3). Application of the present method to the analysis of FA in human urine proved feasible. Copyright © 2009 John Wiley & Sons, Ltd.     

Determination of trimethylamine in fish by capillary electrophoresis with electrogenerated tris(2,2'-bipyridyl)ruthenium(II) chemiluminescence detection.

A capillary electrophoresis with electrogenerated chemiluminescence (CE-ECL) method for the determination of trimethylamine (TMA) in fish was studied. In the presence of TMA, ECL from the reaction of analyte and in situ generated tris(2,2'-bipyridyl)ruthenium(III) [Ru(bpy)(3) (3+)] at electrode surface could be produced. The ECL detection was performed using a Pt working electrode biased at 1.23 V (vs. Ag/AgCl) potential in a 10 mmol/L sodium borate buffer solution, pH 9.2, containing 3 mmol/L Ru(bpy)(3) (2+). A linear calibration curve (correlation coefficient = 0.9996) was obtained in the range 8 x 10(-5)-4 x 10(-8) mol/L for TMA concentration. Recoveries obtained were in the range 98.78-101.46%. The method was successfully applied for the assay of TMA in fish, in combination with solid phase extraction (SPE) disks for sample clean-up and enrichment.     

Determination of uric acid and p-aminohippuric acid in human saliva and urine using capillary electrophoresis with electrochemical detection: potential application in fast diagnosis of renal disease

The monitoring of uric acid (UA) and p-aminohippuric acid (PAH) levels in biological samples is routinely carried out in clinical laboratories as an indication of renal disease. With the aim of investigation of the correlation between the trace amounts of UA and PAH in human saliva or urine and renal diseases, we carried out the determination of UA and PAH in human saliva and urine by using capillary electrophoresis with electrochemical detection (CE-ED) in this work. Under the optimum conditions, UA, PAH and three coexisting analytes could be well separated within 21 min at the separation voltage of 14 kV in 80 mmol/L borax running buffer (pH 9.2). Good linear relationship was established between peak current and concentration of analytes over two orders of magnitude with detection limits (S/N = 3) ranged from 5.01 x 10(-7) to 2.00 x 10(-6) mol/L for all analytes. The result shows that this proposed method could be successfully applied for the study on the correlation between the levels of UA and PAH in human saliva and urine and renal diseases, and provide an alternative and convenient method for the fast diagnosis of renal disease.     

Determination of urinary 5-hydroxytryptophol glucuronide by liquid chromatography-mass spectrometry

5-Hydroxytryptophol glucuronide (GTOL) is the major excretion form of 5-hydroxytryptophol (5-HTOL), a minor serotonin metabolite under normal conditions. Because the concentration of 5-HTOL is markedly increased following consumption of alcohol, measurement of 5-HTOL is used as a sensitive biomarker for detection of recent alcohol intake. This study describes the development and evaluation of a liquid chromatography-electrospray ionization mass spectrometry (LC-MS) procedure for direct quantification of GTOL in human urine. Deuterium labelled GTOL (GTOL-(2)H(4)) was used as internal standard. GTOL was isolated from urine by solid-phase extraction on a C(18) cartridge prior to injection onto a gradient eluted Hypurity C(18) reversed-phase HPLC column. The detection limit of the method was 2.0 nmol/L and the measuring range 6-8500 nmol/L. The intra- and inter-assay coefficients of variation were <3.5% (n=10) and <6.0% (n=9), respectively. The new LC-MS method was highly correlated with an established GC-MS method for urinary 5-HTOL (r(2)=0.99, n=70; mean 5-HTOL/GTOL ratio=1.10). This is the first direct assay for quantification of GTOL in urine. The method is suitable for routine application.     

Flow-injection electrogenerated chemiluminescence determination of fluoroquinolones based on its sensitizing effect.

A simple and sensitive flow-injection electrogenerated chemiluminescence (ECL) method for the determination of fluoroquinolones was developed. The method is based on the sensitizing effect of fluoroquinolones on the weak ECL signal of electrochemical oxidation of luminol on the surface of the platinum flake electrode in the medium of 0.1 mol/L Na2CO3-NaHCO3. At the optimum experimental conditions, the relative ECL intensity increased linearly with increasing fluoroquinolones concentration, in the ranges 1.0 x 10(-8)-2.0 x 10(-4) g/mL for norfloxacin, 5.0 x 10(-9)-6.0 x 10(-6) g/mL for oxfloxacin, 2.0 x 10(-8)-1.4 x 10(-5) g/mL for ciprofloxacin, 1.0 x 10(-8)-1.4 x 10(-5) g/mL for pefloxacin, and 1.0 x 10(-9)-1.0 x 10(-5) g/mL for enoxacin, with detection limits of 4.0 x 10(-9) g/mL, 2.0 x 10(-9) g/mL, 1.0 x 10(-8) g/mL, 8.0 x 10(-9) g/mL, and 8.0 x 10(-10) g/mL, respectively. The relative standard deviations were all less than 2.5% for the determination of 2.0 x 10(-6) g/mL fluoroquinolones (n = 11). The method was used to determine these medicines in pharmaceutical samples with satisfactory results.     

Capillary electrophoresis coupled with electrochemiluminescence for determination of atomoxetine hydrochloride and the study on its interactions with three proteins

A simple, rapid and sensitive method for the determination of atomoxetine hydrochloride (AH) by capillary electrophoresis with electrochemiluminescence detection (CE‐ECL) using tris(2,2′‐bipyridyl) ruthenium (II) was developed. Under optimized conditions, the determinations of AH in capsules and rat plasmas and the study on its interactions with three plasma proteins, including bovine serum albumin, cytochrome c and myoglobin were performed successfully. Relative to some previous studies, in this paper the methodologies for the determination of AH in aqueous solution and spiked plasma systems were established, respectively. By comparing the difference between the two work curves of two systems, the matrix effect in plasma samples on the determination of AH by the CE‐ECL method was discussed in detail. The results indicated that the effect of the matrix in plasma samples should not be ignored even if no obvious interference was found in the electropherograms and the establishment of method validation in complex samples by the CE‐ECL method was necessary. Copyright © 2014 John Wiley & Sons, Ltd.