Substrate selectivity of lipases in the esterification of cis/trans-isomers and positional isomers of conjugated linoleic acid (CLA)

The substrate selectivity of several microbial lipases has been examined in the esterification of the conjugated linoleic acid (CLA) isomers cis-9,trans-11-, cis-9,cis-11-, trans-9,trans-11- and trans-10,cis-12-octadecadienoic acid with n-butanol in n-hexane. Lipases from Candida cylindracea and Mucor miehei had a preference for the cis-9,trans-11-octadecadienoic acid, while Chirazyme L-5, a Candida antarctica lipase A, accepted the trans-9,trans-11-fatty acid with a high selectivity. Moreover, lipase from Candida cylindracea and Chirazyme L-5 catalysed the esterification of the cis-9,trans-11-octadecadienoic acid with n-butanol faster than the corresponding reaction of the trans-10,cis-12-fatty acid.     

Microemulsions as a tool for the regioselective lipase-catalysed esterification of aliphatic diols

The efficiency of Humicola lanuginosa and Candida cylindracea lipases to catalyse the regioselective esterification of butane-1,3-diol with oleic acid has been demonstrated in water-in-oil microemulsion systems stabilized with sodium (bis-2-ethylhexyl) sulphosuccinate as a surfactant in isooctane. Mono- and diesters were selectively synthesized with high reaction rates. The product distribution depends on the positional specificity of the lipases. Water-in-oil microemulsions appear to be an effective and fast system for the regioselective enzymatic esterification of diols. Received: 29 April 1996 / Received revision: 29 July 1996 / Accepted: 5 August 1996     

Preparation of stearoyl lactic acid ester catalyzed by lipases from Rhizomucor miehei and porcine pancreas optimization using response surface methodology

The esterification reaction between stearic acid and lactic acid using Rhizomucor miehei lipase and porcine pancreas lipase was optimized for maximum esterification using response surface methodology. The formation of the ester was found to depend on three parameters namely enzyme/substrate ratio, lactic acid (stearic acid) concentration and incubation period. The maximum esterification predicted by theoretical equations for both lipases matched well with the observed experimental values. In the case of R. miehei lipase, stearoyl lactic acid ester formation was found to increase with incubation period and lactic acid (stearic acid) concentrations with maximum esterification of 26.9% at an enzyme/substrate (E/S) ratio of 125 g mol⁻¹. In the case of porcine pancreas lipase, esterification showed a steady increase with increase in incubation period and lactic acid (stearic acid) concentration independent of the E/S ratios employed. In the case of PPL, a maximum esterification of 18.9% was observed at an E/S ratio of 25 g mol⁻¹ at a lactic acid (stearic acid) concentration of 0.09 M after an incubation period of 72 h. Received: 12 February 1999 / Received revision: 31 May 1999 / Accepted: 4 June 1999     

The short form of the recombinant CAL-A-type lipase UM03410 from the smut fungus <Emphasis Type="Italic">Ustilago maydis</Emphasis> exhibits an inherent <Emphasis Type="Italic">trans</Emphasis>-fatty acid selectivity

The Ustilago maydis lipase UM03410 belongs to the mostly unexplored Candida antarctica lipase (CAL-A) subfamily. The two lipases with […] the highest identity are a lipase from Sporisorium reilianum and the prototypic CAL-A. In contrast to the other CAL-A-type lipases, this hypothetical U. maydis lipase is annotated to possess a prolonged N-terminus of unknown function. Here, we show for the first time the recombinant expression of two versions of lipase UM03410: the full-length form (lipUMf) and an N-terminally truncated form (lipUMs). For comparison to the prototype, the expression of recombinant CAL-A in E. coli was investigated. Although both forms of lipase UM03410 could be expressed functionally in E. coli, the N-terminally truncated form (lipUMs) demonstrated significantly higher activities towards p-nitrophenyl esters. The functional expression of the N-terminally truncated lipase was further optimized by the appropriate choice of the E. coli strain, lowering the cultivation temperature to 20 °C and enrichment of the cultivation medium with glucose. Primary characteristics of the recombinant lipase are its pH optimum in the range of 6.5–7.0 and its temperature optimum at 55 °C. As is typical for lipases, lipUM03410 shows preference for long chain fatty acid esters with myristic acid ester (C14:0 ester) being the most preferred one. More importantly, lipUMs exhibits an inherent preference for C18:1Δ9 trans and C18:1Δ11 trans-fatty acid esters similar to CAL-A. Therefore, the short form of this U. maydis lipase is the only other currently known lipase with a distinct trans-fatty acid selectivity.     

Long-chain acyl thioesters prepared by solvent-free thioesterification and transthioesterification catalysed by microbial lipases

Long-chain acyl thioesters (thio wax esters) have been prepared in high (80% to more than 90%) yields by solvent-free esterification of fatty acids (lauric, myristic, palmitic and stearic acids) with long-chain thiols, such as decane thiol, dodecane thiol, tetradecane thiol and hexadecane thiol, catalysed by lipases from Candida antarctica (Novozym) and Rhizomucor miehei (Lipozyme) in the presence of a 0.4-nm molecular sieve. In the thioesterification reaction Novozym was a more effective biocatalyst than Lipozyme. The extent of thioesterification increased with increasing molar ratio of fatty acid to alkane thiol (1:1 to 3:1) and with temperature (40 °C compared to 60 °C), as well as with the amount of the enzyme preparation and the amount of 0.4-nm molecular sieve. Decreasing the chain length of the alkane thiol from C₁₆ to C₁₀ also increased the extent of thioesterification. Lipase-catalysed solvent-free transthioesterification of fatty acid methyl esters with alkane thiols was less effective for the preparation of acyl thioesters than was thioesterification of fatty acids with alkane thiols. In transthioesterification, Lipozyme was slightly more effective as a biocatalyst than Novozym. Received: 3 September 1998 / Received revision: 18 November 1998 / Accepted: 21 November 1998     

Fatty Acid Specificity in Lipase-Catalyzed Synthesis of Glucoside Esters

The fatty acid specificity of the B-lipase derived from Candida antarctica was investigated in the synthesis of esters of ethyl D-glucopyranoside. The specificity was almost identical with respect to straight-chain fatty acids with 10 to 18 carbon atoms. However, lower fatty acids such as hexanoic and octanoic acid and the unsaturated 9-cis-octadecenoic acid were found to be poor substrates of the enzyme. As a consequence of this selectivity, these fatty acids were accumulated in the unconverted fraction when ethyl D-glucopyranoside was esterified with an excess of a mixture of fatty acids. This accumulation can reduce the overall effectiveness of the process as the activity of the lipase was found to be reduced when exposed to high concentrations of short-chain fatty acids. Finally, using a simplified experimental set-up, the specificity of the C. antarctica B-lipase was compared to the specificity of lipases derived from C. rugosa, Mucor miehei, Humicola, and Pseudomonas. Apart from the C. rugosa lipase, which exhibited a very poor performance, all the enzymes showed a very similar specificity with respect to fatty acids longer than octanoic acid while only the C. antarctica B-lipase showed activity towards sort-chain fatty acids.     

Immobilized lipases from Candida antarctica for producing tyrosyl oleate in solvent-free medium

Abstract

Two immobilized lipases from Candida antarctica have been compared for the direct esterification of tyrosol with oleic acid in equimolar conditions and in the absence of organic solvent. Candida antarctica lipase B was immobilized on octyl-silica agglomerates and compared with commercial Novozym 435. Reduction of tyrosol particle size to 0.1 mm significantly increased the reaction rate with both immobilized lipases, and reduced pressure improved the final tyrosyl oleate yield up to 95% (w/w) in both cases. Immobilized lipases were recovered and reutilized in three consecutive trials with negligible inactivation. Under optimum conditions, a product mixture comprising more than 95% of tyrosyl oleate (w/w) was attained in less than 2 hours. Finally, the index of antioxidant activity obtained, according to the Rancimat method, indicated that tyrosyl oleate was slightly more effective than tyrosol as an antioxidant in a low polar matrix.     

Esterification of phenolic acids catalyzed by lipases immobilized in organogels

Lipases from Rhizomucor miehei and Candida antarctica B were immobilized in hydroxypropylmethyl cellulose organogels based on surfactant-free microemulsions consisting of n-hexane, 1-propanol and water. Both lipases kept their catalytic activity, catalyzing the esterification reactions of various phenolic acids including cinnamic acid derivatives. High reaction rates and yields (up to 94%) were obtained when lipase from C. antarctica was used. Kinetic studies have been performed and apparent kinetic constants were determined showing that ester synthesis catalyzed by immobilized lipases occurs via the Michaelis–Menten mechanism.     

Molecular modeling of substrate selectivity of Candida antarctica lipase B and Candida rugosa lipase towards c9, t11- and t10, c12-conjugated linoleic acid

Molecular modeling was used to clarify the mechanism of the selectivity of Candida antarctica lipase B and Candida rugosa lipase towards cis9, trans11 (c9, t11-) and trans10, cis12 (t10, c12-) conjugated linoleic acid. Hydrogen bonds network, substrate conformation, binding affinity and water molecules in the binding site were analyzed. Substrate conformation and binding affinity were not correlated with the experimental results of the substrate selectivity. On the contrary, better enzyme preference towards a substrate was correlated with two stronger hydrogen bonds (His-NH-O_a and His-NH-Ser-O_γ) and less water molecules between the substrate the binding pocket. Possible explanation of these was discussed.     

Substrate selectivity of lipases in the esterification of oleic acid, linoleic acid, linolenic acid and their all-trans-isomers and in the transesterification of cis/trans-isomers of linoleic acid methyl ester

The substrate selectivity of several microbial lipases has been examined in the esterification of oleic acid, linoleic acid, linolenic acid and their all-trans-isomers and in the alcoholysis of isomeric linoleic acid methyl esters with n-butanol. Lipases from Candida cylindracea and Mucor miehei preferred fatty acids and methyl esters with a (first) cis double bond in 9-position, while Chirazyme L-5, a Candida antarctica lipase A, had a preference for trans-9 unsaturated substrates.     

Lipase-catalyzed synthesis of partial glyceride

Summary Mucor miehei (IM 20) and Candida antarctica (SP 382) lipases were used for esterification of free fatty acids in the absence of organic solvent or transesterification of fatty acid methyl esters in hexane with isopropylidene glycerols. Acid catalyzed cleavage of the isopropylidene groups resulted in the formation of monoacyl glycerol (MAG) and diacyl glycerol (DAG). Both oleic (18:1 n-9) and eicosapentaenoic acid, EPA (20:5 n-3) were successfully incorporated into glycerides. Total acyl donor conversion ranged from 46.9 – 96.9% with MAG content of up to 88.5%.     

Modification of fatty acid selectivity of <Emphasis Type="Italic">Candida antarctica</Emphasis> lipase A by error-prone PCR

Objective

To generate Candida antarctica lipase A (CAL-A) mutants with modified fatty acid selectivities and improved lipolytic activities using error-prone PCR (epPCR).

Results

A Candida antarctica lipase A mutant was obtained in three rounds of epPCR. This mutant showed a 14 times higher ability to hydrolyze triacylglycerols containing conjugated linoleic acids, and was 12 and 14 times more selective towards cis-9, trans-11 and trans-10, cis-12 isomers respectively, compared to native lipase. Lipolytic activities towards fatty acid esters were markedly improved, in particular towards butyric, lauric, stearic and palmitic esters.

Conclusion

Directed molecular evolution is an efficient method to generate lipases with desirable selectivity towards CLA isomers and improved lipolytic activities towards esters of fatty acids.

     

A novel,two consecutive enzyme synthesis of feruloylated monoacyl- and diacyl-glycerols in a solvent-free system

Feruloylated mono- and di-acylglycerols were synthesized in a two step reaction: ethyl ferulate was first transesterified with glycerol and then this was esterified with oleic acid. The yield of the combined feruloylated mono- and di-acylglycerols in the second reaction reached 96% when esterification of 0.3 g transesterification products with 2.22 g oleic acid was catalyzed with 0.25 g Candida antarctica lipase at 60°C under a vaccum of 10 mmHg for 1.33 h.     

Identification and production of 3-hydroxy-Δ9-cis-1,18-octadecenedioic acid by mutants of Candida tropicalis

 The transformation of oleic acid by mutants of Candida tropicalis was studied in fed-batch cultures. Besides Δ⁹-cis–1,18-octadecenedioic acid, 3-hydroxy-Δ⁹-cis–1,18-octadecenedioic acid was detected as the main fermentation product. Here we describe the production, isolation and the complete chemical characterization of the purified 3-hydroxy-Δ⁹-cis–1,18-octadecenedioic acid. The geometric configuration of the double bond was not changed during bioconversion. The enantiomeric excess of the compound was 76%. Mutagenesis of C. tropicalis DSM 3152 with N-methyl-N-nitro-N′-nitrosoguanidine and selection with oleic acid as the sole carbon source led to mutant M 25, which produced the 3-hydroxy-Δ⁹-cis–1,18-octadecenedioic acid at a 1.8-fold higher concentration in the medium as compared to the parent strain. The maximum concentration of the hydroxy dioic acid was 19.4 g/l after 223 h fermentation. Received: 24 August 1995/Received revision: 21 September 1995/Accepted: 4 October 1995     

Metabolic diversity in biohydrogenation of polyunsaturated fatty acids by lactic acid bacteria involving conjugated fatty acid production

Lactobacillus plantarum AKU 1009a effectively transforms linoleic acid to conjugated linoleic acids of cis-9,trans-11-octadecadienoic acid (18:2) and trans-9,trans-11–18:2. The transformation of various polyunsaturated fatty acids by washed cells of L. plantarum AKU 1009a was investigated. Besides linoleic acid, α-linolenic acid [cis-9,cis-12,cis-15-octadecatrienoic acid (18:3)], γ-linolenic acid (cis-6,cis-9,cis-12–18:3), columbinic acid (trans-5,cis-9,cis-12–18:3), and stearidonic acid [cis-6,cis-9,cis-12,cis-15-octadecatetraenoic acid (18:4)] were found to be transformed. The fatty acids transformed by the strain had the common structure of a C18 fatty acid with the cis-9,cis-12 diene system. Three major fatty acids were produced from α-linolenic acid, which were identified as cis-9,trans-11,cis-15–18:3, trans-9,trans-11,cis-15–18:3, and trans-10,cis-15–18:2. Four major fatty acids were produced from γ-linolenic acid, which were identified as cis-6,cis-9,trans-11–18:3, cis-6,trans-9,trans-11–18:3, cis-6,trans-10–18:2, and trans-10-octadecenoic acid. The strain transformed the cis-9,cis-12 diene system of C18 fatty acids into conjugated diene systems of cis-9,trans-11 and trans-9,trans-11. These conjugated dienes were further saturated into the trans-10 monoene system by the strain. The results provide valuable information for understanding the pathway of biohydrogenation by anaerobic bacteria and for establishing microbial processes for the practical production of conjugated fatty acids, especially those produced from α-linolenic acid and γ-linolenic acid. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

The formation of 1-hydroxymethylnaphthalene and 6-hydroxymethylquinoline by both oxidative and reductive routes in Cunninghamella elegans

Extraction of medium after incubation of the fungus, Cunninghamella elegans, with 0.03% (w/v) 1-methylnaphthalene produced mainly 1-hydroxymethylnaphthalene together with some 1-naphthoic acid and hydroxynaphthoic acid. Higher concentrations of substrate were inhibitory to biotransformation. Similar incubations with 1-naphtoic acid as substrate resulted in reduction of the carboxyl group to give 1-hydroxymethylnaphthalene. When 6-methylquinoline was used, the main product was 6-hydroxymethylquinoline but also some quinoline-6-carboxylic acid and some 6-methylquinoline-N-oxide were identified. In a 2-l fermenter 2.5 g substrate was transformed in 324 h. The 6-hydroxymethylquinoline was also produced by reduction of quinoline-6-carboxylic acid by the organism. Received: 9 March 1998 / Received revision: 15 June 1998 / Accepted: 19 June 1998     

Production of (R )-3-pentyn-2-ol through stereospecific hydrolysis of racemic 3-pentyn-2-ol esters with microbial enzymes

Microorganisms and commercial enzymes were screened for their ability to produce (R)-3-pentyn-2-ol from racemic 3-pentyn-2-ol esters through stereospecific hydrolysis. Among the esters formed with acetic acid, propionic acid, hexanoic acid and benzoic acid, the acetate was most effectively hydrolyzed by microbial cells and commercial lipases with high stereospecificity. Rhodococcus rubropertinctus AKU NOC082 was a good catalyst for (R)-3-pentyn-2-ol production through the hydrolytic resolution of racemic 3-pentyn-2-yl acetate. With 15%, 25% and 50% (v/v) racemic 3-pentyn-2-yl acetate as the substrate, 42.6%, 40.8% and 40.0% was hydrolyzed in 5 h, 10 h and 98 h respectively, under the optimized conditions (pH 7.0, 30 °C, 7.5% wet cell concentration), the (R) enantiomer of 3-pentyn-2-ol being formed with an optical purity of 97.8%, 98.0% and 94.2% respectively. Received: 2 June 1998 / Received revision: 3 August 1998 / Accepted: 3 September 1998     

Lipase-catalyzed synthesis of aromatic polyesters

The enzymatic synthesis of aromatic polyesters by direct polyesterification between a diacid and a diol is described. The effects of the type of substrate, type and quantities of lipase, temperature, vacuum, and reaction time on the synthesis of aromatic polyesters were studied in detail. Among three lipases investigated, only Novozym 435 worked well for aromatic polyester synthesis. Temperature and vacuum played an important role in obtaining a high molar mass of the aromatic polyesters. Furthermore, with isophthalic acid and 1,6-hexanediol as substrates, the mass average molar mass of the polyester obtained increased with an increase in the lipase quantity up to 0.375 g (11.7%, w/w of total reactor contents). The mass average molar mass of the polyester was as high as 50000 g mol⁻¹ in 168 h, with a polydispersity of PD ≈ 1.4. Received 27 January 1998/ Accepted in revised form 19 May 1998     

Production of 10,12-dihydroxy-8(E)-octadecenoic acid, an intermediate in the conversion of ricinoleic acid to 7,10,12-trihydroxy-8(E)-octadecenoic acid by Pseudomonas aeruginosa PR3

A bacterial isolate, Pseudomonas aeruginosa (PR3), has been reported to produce a new compound, 7,10,12-trihydroxy-8(E)-octadecenoic acid (TOD), from ricinoleic acid (Kuo TM, LK Manthey and CT Hou. 1998. J Am Oil Chem Soc 75: 875–879). The reaction is unique in that it involves an introduction of two additional hydroxyl groups at carbon 7 and 10 and a rearrangement of the double bond from carbon 9–10 (cis) to 8–9 (trans). In an effort to elucidate the metabolic pathway involved in the formation of TOD from ricinoleic acid by PR3, we have isolated another compound from the reaction mixture using HPLC. The structure of the new compound was determined to be 10, 12-dihydroxy-8(E)-octadecenoic acid (DHOD) by GC/MS, FTIR, and NMR. The structural similarity between DHOD and TOD and the results from the time course study of the above two compounds strongly suggested that DHOD was an intermediate in the bioconversion of ricinoleic acid to TOD by PR3. The optimum pH and temperature for the production of DHOD from ricinoleic acid by PR3 was 6.5 and 25°C, respectively. This is the first report on the production of 10,12-dihydroxy-8(E)-octadecenoic acid from ricinoleic acid by PR3. Journal of Industrial Microbiology & Biotechnology (2000) 24, 167–172. Received 28 July 1999/ Accepted in revised form 18 November 1999