Engineering subtilisin E for enhanced stability and activity in polar organic solvents

We examined the effect of a novel disulfide bond engineered in subtilisin E from Bacillus subtilis based on the structure of a thermophilic subtilisin-type serine protease aqualysin I. Four sites (Ser163/Ser194, Lys170/Ser194, Lys170/Glu195, and Pro172/Glu195) in subtilisin E were chosen as candidates for Cys substitutions by site-directed mutagenesis. The Cys170/Cys195 mutant subtilisin formed a disulfide bond in B. subtilis, and showed a 5-10-fold increase in specific activity for an authentic peptide substrate for subtilisin, N-succinyl-L-Ala-L-Ala-L-Pro-L-Phe-p-nitroanilide, compared with the single-Cys mutants. However, the disulfide mutant had a 50% decrease in catalytic efficiency due to a smaller k(cat) and was thermolabile relative to the wild-type enzyme, whereas it was greatly stabilized relative to its reduced form. These results suggest that an electrostatic interaction between Lys170 and Glu195 is important for catalysis and stability in subtilisin E. Interestingly, the disulfide mutant was found to be more stable in polar organic solvents, such as dimethylformamide and ethanol, than the wild-type enzyme, even under reducing conditions; this is probably due to the substitution of uncharged Cys by charged surface residues (Lys170 and Glu195). Further, the amino-terminal engineered disulfide bond (Gly61Cys/Ser98Cys) and the mutation Ile31Leu were introduced to enhance the stability and catalytic activity. A prominent 3-4-fold increase in the catalytic efficiency occurred in the quintet mutant enzyme over the range of dimethylformamide concentration (up to 40%).     

In vivo formation and stability of engineered disulfide bonds in subtilisin

Computer modeling suggested that a disulfide bond could be built into Bacillus amyloliquefaciens subtilisin between positions 22 (wild-type, Thr) and 87 (Ser) or between positions 24 (Ser) and 87 (Ser). Single cysteines were introduced into this cysteine-free protease at positions 22, 24, or 87 by site-directed mutagenesis of the cloned subtilisin gene. The corresponding double-cysteine mutants were constructed, and recombinant plasmids were expressed in Bacillus subtilis. Double-cysteine mutant enzymes were secreted as efficiently as wild-type, and disulfide bonds were formed quantitatively in vivo. These disulfide bonds were introduced approximately 24 A away from the catalytic site and had no detectable effect on either the specific activities or the pH optima of the mutant enzymes. The equilibrium constants for the reduction of the mutant disulfide bonds by dithiothreitol were determined to be 82 +/- 22 and 20 +/- 5 for Cys22/Cys87 and Cys24/Cys87, respectively. Studies of autoproteolytic inactivation of wild-type subtilisin support a relationship between autolytic stability and conformational stability of the protein. The stabilities of Cys24/Cys87 and wild-type enzymes to autolysis were essentially the same; however, Cys22/Cys87 was actually less stable to autolysis. Reduction of the disulfide cross-bridge lowered the autolytic stability of both double-cysteine mutants relative to their disulfide forms. This correlates with a lowered autolytic stability for the Cys22 and Cys87 single-cysteine mutants, and the fact that an intramolecular hydrogen bond between the hydroxyl groups of Thr22 and Ser87 is likely to be disrupted in the Cys22 and Cys87 single-cysteine mutant proteins.     

Enhancement of the thermal stability of pyroglutamyl peptidase I by introduction of an intersubunit disulfide bond.

From the comparison of the three-dimensional structure of mesophilic pyroglutamyl peptidase from Bacillus amyloliquefaciens and the thermophilic enzyme from Thermococcus litoralis, the intersubunit disulfide bond was estimated to be one of the factors for thermal stability. Since Ser185 was corresponded to Cys190 of the thermophilic enzyme by sequence alignment, the Ser185 residue was replaced with cysteine by site-directed mutagenesis. The S185C mutant enzyme appeared to form a disulfide bond, which was confirmed by SDS-PAGE with and without 2-mercaptoethanol. The mutant enzyme showed a catalytic efficiency equivalent to that of the wild-type enzyme for hydrolysis of a synthetic peptide substrate. However, the thermal stability of the S185C mutant was found to be 30 degrees C higher than that of wild-type. Thus the introduction of a disulfide bond enhanced thermal stability without changing the catalytic efficiency of the enzyme.     

Protein engineering of subtilisin BPN': enhanced stabilization through the introduction of two cysteines to form a disulfide bond

Introduction of a disulfide bond by site-directed mutagenesis was found to enhance the stability of subtilisin BPN' (EC 3.4.21.14) under a variety of conditions. The location of the new disulfide bond was selected with the aid of a computer program, which scored various sites according to the amount of distortion that an introduced disulfide linkage would create in a 1.3-A X-ray model of native subtilisin BPN'. Of the several amino acid pairs identified by this program as suitable candidates, Thr-22 and Ser-87 were selected by using the additional requirement that the individual cysteine substitutions occur at positions that exhibit some degree of variability in related subtilisin amino acid sequences. A subtilisin variant containing cysteine residues at positions 22 and 87 was created by site-directed mutagenesis and was shown to have an activity essentially equivalent to that of the wild-type enzyme. Differential scanning calorimetry experiments demonstrated the variant protein to have a melting temperature 3.1 degrees C higher than that of the wild-type protein and 5.8 degrees C higher than that of the reduced form (-SH HS-) of the variant protein. Kinetic experiments performed under a variety of conditions, including 8 M urea, showed that the Cys-22/Cys-87 disulfide variant undergoes thermal inactivation at half the rate of that of the wild-type enzyme. The increased thermal stability of this disulfide variant is consistent with a decrease in entropy for the unfolded state relative to the unfolded state that contains no cross-link, as would be predicted from the statistical thermodynamics of polymers.     

Mutant subtilisin E with enhanced protease activity obtained by site-directed mutagenesis

The specific activity of subtilisin E, an alkaline serine protease of Bacillus subtilis, was substantially increased by optimizing the amino acid residue at position 31 (Ile in the wild-type enzyme) in the vicinity of the catalytic triad of the enzyme. Eight uncharged amino acids (Cys, Ser, Thr, Gly, Ala, Val, Leu, and Phe) were introduced at this site, which is next to catalytic Asp32, using site-directed mutagenesis. Mutant enzymes were expressed in Escherichia coli and were prepared from the periplasmic space. Only the Val and Leu substitutions gave active enzyme, and the Leu31 mutant was found to have a greatly increased activity compared to the wild-type enzyme. The other six mutant enzymes showed a marked decrease in activity. This result indicates that a branched-chain amino acid at position 31 is essential for the expression of subtilisin activity and that the level of the activity depends on side chain structure. The purified Leu31 mutant enzyme was analyzed with respect to substrate specificity, heat stability, and optimal temperature. It was found that the Leu31 replacement caused a prominent 2-6-fold increase in catalytic efficiency (kcat/Km) due to a larger kcat for peptide substrates.     

Stabilization of Escherichia coli ribonuclease H by introduction of an artificial disulfide bond.

To examine the effect of the introduction of a disulfide bond on the stability of Escherichia coli ribonuclease H, a disulfide bond was engineered between Cys13, which is present in the wild-type enzyme, and Cys44, which is substituted for Asn44 by site-directed mutagenesis. The disulfide bond was only formed between these residues upon oxidation in vitro with redox buffer. The conformational and thermal stabilities were estimated from the guanidine hydrochloride and thermal denaturation curves, respectively. The oxidized (cross-linked) mutant enzyme showed a Tm of 62.3 degrees C, which was 11.8 degrees C higher than that observed for the wild-type enzyme. The free energy change of unfolding in the absence of denaturant, delta G[H2O], and the mid-point of the denaturation curve, [D]1/2, of the oxidized mutant enzyme were also increased by 2.1-2.8 kcal/mol and 0.36-0.48 M, respectively. Introduction of a disulfide bond thus greatly enhanced both the thermal and conformational stabilities of the enzyme. In addition, kinetic analyses for the enzymatic activities of mutant enzymes suggest that Thr43 and Asn44 are involved in the substrate-binding site of the enzyme.     

Effect of disulfide-bond introduction on the activity and stability of the extended-spectrum class A beta-lactamase Toho-1

The production of class A beta-lactamases is a major cause of clinical resistance to beta-lactam antibiotics. Some of class A beta-lactamases are known to have a disulfide bridge. Both narrow spectrum and extended spectrum beta-lactamases of TEM and the SHV enzymes possess a disulfide bond between Cys77 and Cys123, and the enzymes with carbapenem-hydrolyzing activity have a well-conserved disulfide bridge between Cys69 and Cys238. We produced A77C/G123C mutant of the extended-spectrum beta-lactamase Toho-1 in order to introduce a disulfide bond between the cysteine residues at positions 77 and 123. The result of 5,5'-dithiobis-2-nitrobenzoic acid (DTNB) titrations confirmed formation of a new disulfide bridge in the mutant. The results of irreversible heat inactivation and circular dichroism (CD) melting experiments indicated that the disulfide bridge stabilized the enzyme significantly. Though kinetic analysis indicated that the catalytic properties of the mutant were quite similar to those of the wild-type enzyme, E. coli producing this mutant showed drug resistance significantly higher than E. coli producing the wild-type enzyme. We speculate that the stability of the enzymes provided by the disulfide bond may explain the wide distribution of TEM and SHV derivatives and explain how various mutations can cause broadened substrate specificity without loss of stability.     

Introduction of a non-native disulfide bridge to human lysozyme by cysteine scanning mutagenesis

To examine whether the disulfide bridge between residues 65 and 81 can be replaced by a non-native disulfide bridge in the mutant h-lysozyme C77/95A and whether the formation of such a new disulfide bridge affects the folding of the protein, cysteine scanning mutagenesis has been performed within two discontinuous segments (residues 61-67 for the mutant C65/77/95A, and 74-84 for the mutant C77/81/95A). The position of the Cys residue at 65 or 81 was continuously shifted by site-directed mutagenesis. Of the mutants, only substitution of Cys for Trp64 allowed the secretion of mutant h-lysozyme(W64C) into the medium in a sufficient amount for analysis. After the purification, the mutant enzyme was obtained as two components (W64C-A and W64C-B). The only difference between A and B was that A had a peptide bond cleaved between Ala77 and His78. A non-native disulfide bridge between residues 64-81 was found in both components. Little difference was observed in CD spectra among wild-type and mutant enzymes. It is likely that the tertiary structure of the W64C mutant might be distorted at the location, because the directions of amino acid side chains at positions of 64 and 81 are shown to be opposite to each other in wild-type h-lysozyme by X-ray crystallographic analysis.     

Elimination of disulfide bonds affects assembly and secretion of the human chorionic gonadotropin beta subunit

Human chorionic gonadotropin (hCG) consists of two noncovalently joined alpha and beta subunits similar to the other glycoprotein hormones. To study the function of the individual disulfide bonds in subunit assembly and secretion, site-directed mutagenesis was used to convert the 12 cysteine (Cys) residues in the beta subunit of hCG to either alanine or serine. Both cysteines of proposed disulfide pairs were also mutated. These mutant hCG beta genes were transfected alone or together with the wild-type alpha gene into Chinese hamster ovary cells. Only 3-10% assembly could be achieved with derivatives containing single Cys mutations at positions 26, 110, 72, and 90, whereas no assembly was detected with the other 8 mutants. However, double mutations of pairs 26-110 or 23-72 showed increased dimer formation (11 and 36%, respectively). The secretion rate of individual mutants varied significantly. Whereas the Cys-23 and 72 mutants were secreted normally (t1/2 = 140-190 min), the Cys-26 mutant was secreted faster (t1/2 = 70 min), and the other 9 mutants were secreted slower (t1/2 = 280-440 min); mutations of both Cys at 26 and 110 caused much faster secretion (t1/2 = 34 min). Although the secretion rate of these mutants differed, they were quantitatively recovered in the medium except for mutant Cys-88, Cys-23-72, and Cys-34-88 (40, 55, and 10% secreted, respectively). Thus, interruption of any disulfide bond in the hCG beta subunit alters the structure sufficiently to block dimer formation and in some cases slow secretion, although the stability for most of the mutant hCG beta subunits is not greatly affected. The data indicate that interruption of any hCG beta disulfide bond generates different structural forms that are unable to assemble with the alpha subunit, and that the structural requirements for stability and assembly are different.     

Identification and characterization of the functional amino acids at the active center of pig liver thioltransferase by site-directed mutagenesis

By using site-directed mutagenesis techniques, the essential amino acids at the catalytic center of porcine thioltransferase (glutaredoxin) were determined. Seven oligonucleotides were designed, synthesized, and used to construct mutants, ETT-C22S, ETT-C25S, ETT-C25A, ETT-R26V, ETT-K27Q, ETT-R26V: K27Q, and ETT-C78S:C82S, by altering their codons in pig liver thioltransferase cDNA/M13mp18 clones. Each of the thioltransferases was purified to homogeneity and its dithiol-disulfide exchange, and dehydroascorbate reductase activities were compared with those of the wild-type (ETT). Evidence was obtained that Cys22 was essential for catalytic activity, and the extremely low pKa value of its sulfhydryl group was facilitated primarily by Arg26. The role of Lys27 at the active center was different from that of Arg26 and may be important in stabilizing the E.S intermediate by electrostatic forces. The second pair of cysteines, Cys78 and Cys82, nearer the C terminus, were not directly involved in the active center, but may play a role in defining the native protein structure. The replacement of the original Cys with a Ser at position 25 increased rather than decreased the enzyme activity, suggesting that the proposed intramolecular disulfide bond between Cys22 and Cys25 is not necessary for the catalytic mechanism of the Ser25 mutant, but does not rule out such a mechanism for the wild-type enzyme.     

Role of intermolecular disulfide bonds of the organic solvent-stable PST-01 protease in its organic solvent stability

The PST-01 protease is secreted by the organic solvent-tolerant microorganism Pseudomonas aeruginosa PST-01 and is stable in the presence of various organic solvents. Therefore, the PST-01 strain and the PST-01 protease are very useful for fermentation and reactions in the presence of organic solvents, respectively. The organic solvent-stable PST-01 protease has two disulfide bonds (between Cys-30 and Cys-58 and between Cys-270 and Cys-297) in its molecule. Mutant PST-01 proteases in which one or both of the disulfide bonds were deleted were constructed by site-directed mutagenesis, and the effect of the disulfide bonds on the activity and the various stabilities was investigated. The disulfide bond between Cys-270 and Cys-297 in the PST-01 protease was found to be essential for its activity. The disulfide bond between Cys-30 and Cys-58 played an important role in the organic solvent stability of the PST-01 protease.     

Role of Intermolecular Disulfide Bonds of the Organic Solvent-Stable PST-01 Protease in Its Organic Solvent Stability

The PST-01 protease is secreted by the organic solvent-tolerant microorganism Pseudomonas aeruginosa PST-01 and is stable in the presence of various organic solvents. Therefore, the PST-01 strain and the PST-01 protease are very useful for fermentation and reactions in the presence of organic solvents, respectively. The organic solvent-stable PST-01 protease has two disulfide bonds (between Cys-30 and Cys-58 and between Cys-270 and Cys-297) in its molecule. Mutant PST-01 proteases in which one or both of the disulfide bonds were deleted were constructed by site-directed mutagenesis, and the effect of the disulfide bonds on the activity and the various stabilities was investigated. The disulfide bond between Cys-270 and Cys-297 in the PST-01 protease was found to be essential for its activity. The disulfide bond between Cys-30 and Cys-58 played an important role in the organic solvent stability of the PST-01 protease.     

Identification of essential amino acid residues for catalytic activity and thermostability of novel chitosanase by site-directed mutagenesis

The functional importance of a conserved region in a novel chitosanase from Bacillus sp. CK4 was investigated. Each of the three carboxylic amino acid residues (Glu-50, Glu-62, and Asp-66) was changed to Asp and Gln or Asn and Glu by site-directed mutagenesis, respectively. The Asp-66-->Asn and Asp-66-->Glu mutation remarkably decreased kinetic parameters such as Vmax and kcat to approximately 1/1,000 those of the wild-type enzyme, indicating that the Asp-66 residue was essential for catalysis. The thermostable chitosanase contains three Cys residues at positions 49, 72, and 211. The Cys-49-->Ser/Tyr and Cys-72-->Ser/Tyr mutant enzymes were as stable to thermal inactivation and denaturating agents as the wild-type enzyme. However, the half-life of the Cys-211-->Ser/Tyr mutant enzyme was less than 10 min at 80 degrees C, while that of the wild-type enzyme was about 90 min. Moreover, the residual activity of Cys-211-->Ser/Tyr enzyme was substantially decreased by 8 M urea; and it lost all catalytic activity in 40% ethanol. These results show that the substitution of Cys with any amino acid residues at position 211 seems to affect the conformational stability of the chitosanase.     

Photoaffinity labeling and site-directed mutagenesis of rat squalene epoxidase

Squalene epoxidase (SE) (EC 1.14.99.7) is a flavin-requiring, non-cytochrome P-450 oxidase that catalyzes the conversion of squalene to (3S)-2,3-oxidosqualene. Photolabeling and site-directed mutagenesis were performed on recombinant rat SE (rrSE) to elucidate the location and roles of active-site residues important for catalysis. Two new benzophenone-containing analogs of NB-598, a nanomolar inhibitor of vertebrate SE, were synthesized in tritium-labeled form. These photoaffinity analogs (PDA-I and PDA-II) became covalently attached to SE when irradiated at 360 nm. Lys-C digestion and HPLC purification of [3H]PDA-I-labeled rrSE resulted in isolation of a single major peptide. MALDI-TOF mass spectrometry of this peptide indicated a covalent adduct between PDA-I and a tripeptide, Asp-Ile-Lys, beginning at Asp-426 of rat SE. Based on the labeling results, three mutant constructs were made. First, the D426A and K428A constructs showed a 5- to 8-fold reduction in SE activity compared with wild-type enzyme, while little change was observed in the I427A mutant. Second, a set of five mutant constructs was prepared for the conserved region based on the structure of the flavoprotein p-hydroxybenzoate hydroxylase (PHBH). Compared with wild-type, D284A and D407A showed less than 25% SE activity. This reduction also appeared to correlate with reduced affinity of the mutant proteins for FAD. Finally, each of the seven Cys residues of rrSE were individually mutated to Ala. Three Cys substitutions had no effect on SE activity, and substitutions at Cys-500 and Cys-533 showed a 50% lower SE activity. Mutations at Cys-490 and Cys-557 produced proteins with negligible SE activity, implicating these residues as being either structurally or catalytically essential. Chemical modification of wildtype and Cys mutants with a thiol-modifying reagent support the existence of a disulfide bond between Cys-490 and Cys-557.     

Thiol-based regulation of redox-active glutamate-cysteine ligase from Arabidopsis thaliana

Glutathione biosynthesis is a key component in the network of plant stress responses that counteract oxidative damage and maintain intracellular redox environment. Using a combination of mass spectrometry and site-directed mutagenesis, we examined the response of Arabidopsis thaliana glutamate-cysteine ligase (GCL) to changes in redox environment. Mass spectrometry identified two disulfide bonds (Cys186-Cys406 and Cys349-Cys364) in GCL. Mutation of either Cys-349 or Cys-364 to a Ser reduced reaction rate by twofold, but substitution of a Ser for either Cys-186 or Cys-406 decreased activity by 20-fold and abrogated the response to changes in redox environment. Redox titrations show that the regulatory disulfide bond has a midpoint potential comparable with other known redox-responsive plant proteins. Mutation of Cys-102, Cys-251, Cys-349, or Cys-364 did not alter the response to redox environment, indicating that modulation of activity depends on the Cys186-Cys406 disulfide bond. In vivo analysis of GCL in Arabidopsis root extracts revealed that multiple oxidative stresses altered the distribution of oxidized (active) and reduced (inactive) enzyme and that this change correlated with increased GCL activity. The thiol-based regulation of GCL provides a posttranslational mechanism for modulating enzyme activity in response to in vivo redox environment and suggests a role for oxidative signaling in the maintenance of glutathione homeostasis in plants.     

Two Highly Homologous Methionine Sulfoxide Reductase A from Tomato (<Emphasis Type="Italic">Solanum lycopersicum</Emphasis>), Exhibit Distinct Catalytic Properties

E4, which is a fruit-ripening gene that is strongly induced by ethylene, has been reported to be a member of the methionine sulfoxide reductase A (MSRA) gene. In the present study, we determined for the first time the enzymatic activity and delineated the catalytic mechanism of the E4 protein via site-directed mutagenesis. The disulfide intermolecular cross-linking, kinetics parameter, thiol content titration analysis of wild-type and mutated E4 proteins revealed that the cysteine at position 37 (Cys-37) was the key catalytic residue, and Cys-194, but not Cys-180 served as the first recycling Cys in the thioredoxin (Trx)-dependent regeneration system. In addition, the SlMSRA2 protein, which was encoded by another MSRA gene, shared high similarity with the E4 protein and was truncated at the C-terminus. The wild-type and mutated SlMSRA2 enzymes had similar activities compared to the E4 protein using DTT as a reductant, but showed extremely low activities in the Trx-dependent reduction system. Our results indicated that E4 and SlMSRA2 proteins might exhibit distinct catalytic mechanisms.     

Cysteine 98 in CYP3A4 contributes to conformational integrity required for P450 interaction with CYP reductase

Previously human cytochrome P450 3A4 was efficiently and specifically photolabeled by the photoaffinity ligand lapachenole. One of the modification sites was identified as cysteine 98 in the B-C loop region of the protein [B. Wen, C.E. Doneanu, C.A. Gartner, A.G. Roberts, W.M. Atkins, S.D. Nelson, Biochemistry 44 (2005) 1833-1845]. Loss of CO binding capacity and subsequent decrease of catalytic activity were observed in the labeled CYP3A4, which suggested that aromatic substitution on residue 98 triggered a critical conformational change and subsequent loss of enzyme activity. To test this hypothesis, C98A, C98S, C98F, and C98W mutants were generated by site-directed mutagenesis and expressed functionally as oligohistidine-tagged proteins. Unlike the mono-adduction observed in the wild-type protein, simultaneous multiple adductions occurred when C98F and C98W were photolabeled under the same conditions as the wild-type enzyme, indicating a substantial conformational change in these two mutants compared with the wild-type protein. Kinetic analysis revealed that the C98W mutant had a drastic 16-fold decrease in catalytic efficiency (V(max)/K(m)) for 1'-OH midazolam formation, and about an 8-fold decrease in catalytic efficiency (V(max)/K(m)) for 4-OH midazolam formation, while the C98A and C98S mutants retained the same enzyme activity as the wild-type enzyme. Photolabeling of C98A and C98S with lapachenole resulted in monoadduction of only Cys-468, in contrast to the labeling of Cys-98 in wild-type CYP3A4, demonstrating the marked selectivity of this photoaffinity ligand for cysteine residues. The slight increases in the midazolam binding constants (K(s)) in these mutants suggested negligible perturbation of the heme environment. Further activity studies using different P450:reductase ratios suggested that the affinity of P450 to reductase was significantly decreased in the C98W mutant, but not in the C98A and C98S mutants. In addition, the C98W mutant exhibited a 41% decrease in the maximum electron flow rate between P450 and reductase as measured by reduced nicotinamide adenine dinucleotide phosphate consumption at a saturating reductase concentration. In conclusion, our data strongly suggest that cysteine 98 in the B-C loop region significantly contributes to conformational integrity and catalytic activity of CYP3A4, and that this residue or residues nearby might be involved in an interaction with P450 reductase.     

Identification of nonessential disulfide bonds and altered conformations in the v-sis protein, a homolog of the B chain of platelet-derived growth factor.

The protein encoded by v-sis, the oncogene of simian sarcoma virus, is homologous to the B chain of platelet-derived growth factor (PDGF). There are eight conserved Cys residues between PDGF-B and the v-sis protein. Both native PDGF and the v-sis protein occur as disulfide-bonded dimers, probably containing both intramolecular and intermolecular disulfide bonds. Oligonucleotide-directed mutagenesis was used to change the Cys codons to Ser codons in the v-sis gene. Four single mutants lacked detectable biological activity, indicating that Cys-127, Cys-160, Cys-171, and Cys-208 are required for formation of a biologically active v-sis protein. The other four single mutants retained biological activity as determined in transformation assays, indicating that Cys-154, Cys-163, Cys-164, and Cys-210 are dispensable for biological activity. Double and triple mutants containing three of these altered sites were constructed, some of which were transforming as well. The v-sis proteins encoded by biologically active mutants displayed significantly reduced levels of dimeric protein compared with the wild-type v-sis protein, which dimerized very efficiently. Furthermore, a mutant with a termination codon at residue 209 exhibited partial transforming activity. This study thus suggests that the minimal region required for transformation consists of residues 127 to 208. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis indicated that the v-sis proteins encoded by some of the biologically active mutants exhibited an altered conformation when compared with the wild-type v-sis protein, and suggested that Cys-154 and Cys-163 participate in a nonessential disulfide bond.     

Two glutamic acids in chitosanase A from Matsuebacter chitosanotabidus 3001 are the catalytically important residues.

Chitosanase is the glycolytic enzyme that hydrolyzes the glucosamine GlcN-GlcN bonds of chitosan. To determine the catalytically important residues of chitosanase A (ChoA) from Matsuebacter chitosanotabidus 3001, we performed both site-directed and random mutagenesis of choA, obtaining 31 mutants. These mutations indicated that Glu-121 and Glu-141 were catalytically important residues, as mutation at these sites to Ala or Asp drastically decreased the enzymatic activity to 0.1-0.3% of that of the wild type enzyme. Glu-141 mutations remarkably decreased kinetic constant k(cat) for hydrolysis of chitosan, meanwhile Glu-121 mutations decreased the activities to undeterminable levels, precluding parameter analysis. No hydrolysis of (GlcN)(6) was observed with the purified Glu-121 mutant and extremely slow hydrolysis with the Glu-141 mutant. We also found that Asp-139, Asp-148, Arg-150, Gly-151, Asp-164, and Gly-280 were important residues for enzymatic activities, although they are not directly involved in catalysis. In addition, mutation of any of the six cysteine residues of ChoA abrogated the enzymatic activity, and Cys-136 and Cys-231 were found to form a disulfide bond. In support of the significance of the disulfide bond of ChoA, chitosanase activity was impaired on incubation with a reducing agent. Thus, ChoA from M. chitosanotabidus 3001 uses two glutamic acid residues as putative catalytic residues and has at least one disulfide bond.     

Stability of wild-type and mutant RTEM-1 beta-lactamases: effect of the disulfide bond

Uniquely among class A beta-lactamases, the RTEM-1 and RTEM-2 enzymes contain a single disulfide bond between Cys 77 and Cys 123. To study the possible role of this naturally occurring disulfide in stabilizing RTEM-1 beta-lactamase and its mutants at residue 71, this bond was removed by introducing a Cys 77----Ser mutation. Both the wild-type enzyme and the single mutant Cys 77----Ser confer the same high levels of resistance to ampicillin in vivo to Escherichia coli; at 30 degrees C the specific activity of purified Cys 77----Ser mutant is also the same as that of the wild-type enzyme. Also, neither wild-type enzyme nor the Cys 77----Ser mutant is inactivated by brief exposure to p-hydroxymercuribenzoate. However, above 40 degrees C the mutant enzyme is less stable than wild-type enzyme. After introduction of the Cys 77----Ser mutation, none of the double mutants (containing the second mutations at residue 71) confer resistance to ampicillin in vivo at 37 degrees C; proteins with Ala, Val, Leu, Ile, Met, Pro, His, Cys, and Ser at residue 71 confer low levels of resistance to ampicillin in vivo at 30 degrees C. The use of electrophoretic blots stained with antibodies against beta-lactamase to analyze the relative quantities of mutant proteins in whole-cell extracts of E. coli suggests that all 19 of the doubly mutant enzymes are proteolyzed much more readily than their singly mutant analogues (at Thr 71) that contain a disulfide bond.(ABSTRACT TRUNCATED AT 250 WORDS)