Identification of essential amino acid residues for catalytic activity and thermostability of novel chitosanase by site-directed mutagenesis

The functional importance of a conserved region in a novel chitosanase from Bacillus sp. CK4 was investigated. Each of the three carboxylic amino acid residues (Glu-50, Glu-62, and Asp-66) was changed to Asp and Gln or Asn and Glu by site-directed mutagenesis, respectively. The Asp-66-->Asn and Asp-66-->Glu mutation remarkably decreased kinetic parameters such as Vmax and kcat to approximately 1/1,000 those of the wild-type enzyme, indicating that the Asp-66 residue was essential for catalysis. The thermostable chitosanase contains three Cys residues at positions 49, 72, and 211. The Cys-49-->Ser/Tyr and Cys-72-->Ser/Tyr mutant enzymes were as stable to thermal inactivation and denaturating agents as the wild-type enzyme. However, the half-life of the Cys-211-->Ser/Tyr mutant enzyme was less than 10 min at 80 degrees C, while that of the wild-type enzyme was about 90 min. Moreover, the residual activity of Cys-211-->Ser/Tyr enzyme was substantially decreased by 8 M urea; and it lost all catalytic activity in 40% ethanol. These results show that the substitution of Cys with any amino acid residues at position 211 seems to affect the conformational stability of the chitosanase.     

New chitosan-degrading strains that produce chitosanases similar to ChoA of Mitsuaria chitosanitabida

The betaproteobacterium Mitsuaria chitosanitabida (formerly Matsuebacter chitosanotabidus) 3001 produces a chitosanase (ChoA) that is classified in glycosyl hydrolase family 80. While many chitosanase genes have been isolated from various bacteria to date, they show limited homology to the M. chitosanitabida 3001 chitosanase gene (choA). To investigate the phylogenetic distribution of chitosanases analogous to ChoA in nature, we identified 67 chitosan-degrading strains by screening and investigated their physiological and biological characteristics. We then searched for similarities to ChoA by Western blotting and Southern hybridization and selected 11 strains whose chitosanases showed the most similarity to ChoA. PCR amplification and sequencing of the chitosanase genes from these strains revealed high deduced amino acid sequence similarities to ChoA ranging from 77% to 99%. Analysis of the 16S rRNA gene sequences of the 11 selected strains indicated that they are widely distributed in the beta and gamma subclasses of Proteobacteria and the Flavobacterium group. These observations suggest that the ChoA-like chitosanases that belong to family 80 occur widely in a broad variety of bacteria.     

Purification, Characterization, and Gene Analysis of a Chitosanase (ChoA) from Matsuebacter chitosanotabidus 3001

The extracellular chitosanase (34,000 M(r)) produced by a novel gram-negative bacterium Matsuebacter chitosanotabidus 3001 was purified. The optimal pH of this chitosanase was 4.0, and the optimal temperature was between 30 and 40 degrees C. The purified chitosanase was most active on 90% deacetylated colloidal chitosan and glycol chitosan, both of which were hydrolyzed in an endosplitting manner, but this did not hydrolyze chitin, cellulose, or their derivatives. Among potential inhibitors, the purified chitosanase was only inhibited by Ag(+). Internal amino acid sequences of the purified chitosanase were obtained. A PCR fragment corresponding to one of these amino acid sequences was then used to screen a genomic library for the entire choA gene encoding chitosanase. Sequencing of the choA gene revealed an open reading frame encoding a 391-amino-acid protein. The N-terminal amino acid sequence had an excretion signal, but the sequence did not show any significant homology to other proteins, including known chitosanases. The 80-amino-acid excretion signal of ChoA fused to green fluorescent protein was functional in Escherichia coli. Taken together, these results suggest that we have identified a novel, previously unreported chitosanase.     

Mitsuaria chitosanase with unrevealed important amino acid residues: characterization and enhanced production in Pichia pastoris

A chitosan plate assay was employed to screen for chitosanase-producing bacterial strains and isolate 141 was found to exhibit high activity. Characterization of this isolate revealed that it belonged to Mitsuaria (designated as Mitsuaria sp. 141). The encoded chitosanase (choA) gene was then cloned by PCR and the deduced amino acid sequence showed 98% identity to a formerly described Mitsuaria chitosanitabida 3001 ChoA (McChoA). Surprisingly, the ChoA encoded by Mitsuaria sp. 141 (MsChoA) appeared to have a much higher optimum temperature compared to McChoA. Site-directed mutagenesis was then employed to generate five MschoA mutant genes encoding MsChoA K204Q, R216K, T222N, R216K/T222N, or K204Q/R216K/T222N. All the ChoA mutants exhibited a much lower specific activity and a lower optimum temperature. The results confirmed that the substitution of three non-conserved amino acids accounts for the major reduction of the enzyme activity in MsChoA. Furthermore, the MschoA gene was cloned for over-expression in Pichia pastoris after coding sequence optimization. One of the P. pastoris transformants with Mut^S phenotype was found to produce 1,480.2?±?340.9 U ChoA mL^?1 of cell culture by high-cell-density fermentation. This represents the highest yield of recombinant ChoA production that has ever been reported thus far. The recombinant P. pastoris strain should therefore be well suited for industrial-scale production of chitosanase.     

Site-directed mutagenesis of the putative catalytic triad of poliovirus 3C proteinase.

Based on predictions of the structure of proteinase 3C of poliovirus, mutations have been made at residues that are supposed to constitute the catalytic triad. Wild-type and mutant 3C were expressed in Escherichia coli, purified to homogeneity, and characterized by the ability to cleave a synthetic peptide substrate or an in vitro translated polypeptide consisting of part of the polyprotein of poliovirus. Additionally, the ability of autocatalytic processing of a precursor harboring wild-type or mutant 3C sequences was tested. Single substitutions of the residues His-40, Glu-71, and Cys-147 by Tyr, Gln, and Ser, respectively, resulted in an inactive enzyme. Replacement of Asp-85 by Asn resulted in an enzyme that was as active as wild-type enzyme in trans cleavage assays but whose autoprocessing ability was impaired. Our results are consistent with the proposal that residues His-40, Glu-71, and Cys-147 constitute the catalytic triad of poliovirus 3C proteinase. Furthermore, residue Asp-85 is not required for proper proteolytic activity despite being highly conserved between different picornaviruses. This indicates that Asp-85 might be involved in a different function of 3C.     

Important role of the cys-191 cys-220 disulfide bond in thrombin function and allostery

Little is known on the role of disulfide bonds in the catalytic domain of serine proteases. The Cys-191-Cys-220 disulfide bond is located between the 190 strand leading to the oxyanion hole and the 220-loop that contributes to the architecture of the primary specificity pocket and the Na+ binding site in allosteric proteases. Removal of this bond in thrombin produces an approximately 100-fold loss of activity toward several chromogenic and natural substrates carrying Arg or Lys at P1. Na+ activation is compromised, and no fluorescence change can be detected in response to Na+ binding. A 1.54-A resolution structure of the C191A/C220A mutant in the free form reveals a conformation similar to the Na+-free slow form of wild type. The lack of disulfide bond exposes the side chain of Asp-189 to solvent, flips the backbone O atom of Gly-219, and generates disorder in portions of the 186 and 220 loops defining the Na+ site. This conformation, featuring perturbation of the Na+ site but with the active site accessible to substrate, offers a possible representation of the recently identified E* form of thrombin. Disorder in the 186 and 220 loops and the flip of Gly-219 are corrected by the active site inhibitor H-D-Phe-Pro-Arg-CH(2)Cl, as revealed by the 1.8-A resolution structure of the complex. We conclude that the Cys-191-Cys-220 disulfide bond confers stability to the primary specificity pocket by shielding Asp-189 from the solvent and orients the backbone O atom of Gly-219 for optimal substrate binding. In addition, the disulfide bond stabilizes the 186 and 220 loops that are critical for Na+ binding and activation.     

Escherichia coli H(+)-ATPase: role of the delta subunit in binding Fl to the Fo sector.

The roles of the Escherichia coli H(+)-ATPase (FoFl) delta subunit (177 amino acid residues) was studied by analyzing mutants. The membranes of nonsense (Gln-23----end, Gln-29----end, Gln-74----end) and missense (Gly-150----Asp) mutants had very low ATPase activities, indicating that the delta subunit is essential for the binding of the Fl portion to Fo. The Gln-176----end mutant had essentially the same membrane-bound activity as the wild type, whereas in the Val-174----end mutant most of the ATPase activity was in the cytoplasm. Thus Val-174 (and possibly Leu-175 also) was essential for maintaining the structure of the subunit, whereas the two carboxyl terminal residues Gln-176 and Ser-177 were dispensable. Substitutions were introduced at various residues (Thr-11, Glu-26, Asp-30, Glu-42, Glu-82, Arg-85, Asp-144, Arg-154, Asp-161, Ser-163), including apparently conserved hydrophilic ones. The resulting mutants had essentially the same phenotypes as the wild type, indicating that these residues do not have any significant functional role(s). Analysis of mutations (Gly-150----Asp, Pro, or Ala) indicated that Gly-150 itself was not essential, but that the mutations might affect the structure of the subunit. These results suggest that the overall structure of the delta subunit is necessary, but that individual residues may not have strict functional roles.     

Structural and functional relations among thioredoxins of different species

Three-dimensional models have been constructed of homologous thioredoxins and protein disulfide isomerases based on the high resolution x-ray crystallographic structure of the oxidized form of Escherichia coli thioredoxin. The thioredoxins, from archebacteria to humans, have 27-69% sequence identity to E. coli thioredoxin. The models indicate that all the proteins have similar three-dimensional structures despite the large variation in amino acid sequences. As expected, residues in the active site region of thioredoxins are highly conserved. These include Asp-26, Ala-29, Trp-31, Cys-32, Gly-33, Pro-34, Cys-35, Asp-61, Pro-76, and Gly-92. Similar residues occur in most protein disulfide isomerase sequences. Most of these residues form the surface around the active site that appears to facilitate interactions with other enzymes. Other structurally important residues are also conserved. A proline at position 40 causes a kink in the alpha-2 helix and thus provides the proper position of the active site residues at the amino end of this helix. Pro-76 is important in maintaining the native structure of the molecule. In addition, residues forming the internal contact surfaces between the secondary structural elements are generally unchanged such as Phe-12, Val-25, and Phe-27.     

Mutational analysis of amino acid residues involved in catalytic activity of a family 18 chitinase from tulip bulbs

We expressed chitinase-1 (TBC-1) from tulip bulbs (Tulipa bakeri) in E. coli cells and used site-directed mutagenesis to identify amino acid residues essential for catalytic activity. Mutations at Glu-125 and Trp-251 completely abolished enzyme activity, and activity decreased with mutations at Asp-123 and Trp-172 when glycolchitin was the substrate. Activity changed with the mutations of Trp-251 to one of several amino acids with side-chains of little hydrophobicity, suggesting that hydrophobic interaction of Trp-251 is important for the activity. Molecular dynamics (MD) simulation analysis with hevamine as the model compound showed that the distance between Asp-123 and Glu-125 was extended by mutation of Trp-251. Kinetic studies of Trp-251-mutated chitinases confirmed these various phenomena. The results suggested that Glu-125 and Trp-251 are essential for enzyme activity and that Trp-251 had a direct role in ligand binding.     

Are turns required for the folding of ribonuclease T1?

Ribonuclease T1 (RNase T1) is a small, globular protein of 104 amino acids for which extensive thermodynamic and structural information is known. To assess the specific influence of variations in amino acid sequence on the mechanism for protein folding, circularly permuted variants of RNase T1 were constructed and characterized in terms of catalytic activity and thermodynamic stability. The disulfide bond connecting Cys-2 and Cys-10 was removed by mutation of these residues to alanine (C2, 10A) to avoid potential steric problems imposed by the circular permutations. The original amino-terminus and carboxyl-terminus of the mutant (C2, 10A) were subsequently joined with a tripeptide linker to accommodate a reverse turn and new termini were introduced throughout the primary sequence in regions of solvent-exposed loops at Ser-35 (cp35S1), Asp-49 (cp49D1), Gly-70 (cp70G1), and Ser-96 (cp96S1). These circularly permuted RNase T1 mutants retained 35-100% of the original catalytic activity for the hydrolysis of guanylyl(3'-->5')cytidine, suggesting that the overall tertiary fold of these mutants is very similar to that of wild-type protein. Chemical denaturation curves indicated thermodynamic stabilities at pH 5.0 of 5.7, 2.9, 2.6, and 4.6 kcal/mol for cp35S1, cp49D1, cp70G1, and cp96S1, respectively, compared to a value of 10.1 kcal/mol for wild-type RNase T1 and 6.4 kcal/mol for (C2, 10A) T1. A fifth set of circularly permuted variants was attempted with new termini positioned in a tight beta-turn between Glu-82 and Gln-85. New termini were inserted at Asn-83 (cp83N1), Asn-84 (cp84N1), and Gln-85 (cp85Q1). No detectable amount of protein was ever produced for any of the mutations in this region, suggesting that this turn may be critical for the proper folding and/or thermodynamic stability of RNase T1.     

Effect of bipolar membrane electrobasification on chitosanase activity during chitosan hydrolysis

Chitosanase is an enzyme that hydrolyzes chitosan, a beta-(1-4) glucosamine polymer, into size-specific oligomers that have pharmaceutical and biological properties. The aim of the present work was to use the bipolar membrane technology, in particular the OH(-) stream produced by water splitting, for inactivation of chitosanase at alkaline pH in order to terminate the enzymatic reaction producing chitosan oligomers. The objectives consisted of studying the effect of pH: (a) on the stability of chitosanase, and (b) on the catalytic activity of chitosanase during chitosan hydrolysis. The enzyme was found to be stable in the pH range of 3-8 during at least 7h, and partially lost its activity after 1h at pH 8. The catalytic activity of chitosanase during chitosan hydrolysis decreased after pH adjustment by electrobasification. The reaction rate decreased by 50% from pH 5.5 to 6, whereas the reaction was completely inhibited at pH>7. The decrease of reaction rate was due to chitosan substrate insolubilization and chitosanase denaturation at alkaline pH values.     

Directed evolution to enhance secretion efficiency and thermostability of chitosanase from Mitsuaria chitosanitabida 3001

Chitosanase (ChoA) from Mitsuaria chitosanitabida 3001 was successfully evolved with secretion efficiency and thermal stability. The inactive ChoA mutant (G151D) gene was used to mutate by an error-prone PCR technique and mutant genes that restored chitosanase activity were isolated. Two desirable mutants, designated M5S and M7T, were isolated. Two amino acids, Leu74 and Val75, in the signal peptide of ChoA were changed to Gln and Ile respectively in the M7T mutant, in addition to the G151D mutation. The L74Q/V75I double ChoA mutant was 1.5-fold higher in specific activity than wild-type ChoA due to efficient secretion of ChoA. One amino acid Asn222 was changed to Ser in the M5S mutant in addition to the G151D mutation. The N222S single ChoA mutant was 1.2-fold higher in specific activity and showed a 17% increase in thermal stability at 50 degrees C as compared with wild-type ChoA. This is the first study to achieve an evolutional increase in enzyme capability among chitosanses.     

Site-directed mutagenesis suggests close functional relationship between a human rhinovirus 3C cysteine protease and cellular trypsin-like serine proteases

Human rhinoviruses, like other picornaviruses, encode a cysteine protease (designated 3C) which cleaves mainly at viral Gln-Gly pairs. There are significant areas of homology between picornavirus 3C cysteine proteases and cellular serine proteases (e.g. trypsin), suggesting a functional relationship between their catalytic regions. To test this functional relationship, we made single substitutions in human rhinovirus type 14 protease 3C at seven amino acid positions which are highly conserved in the 3C proteases of animal picornaviruses. Substitutions at either His-40, Asp-85, or Cys-146, equivalent to the trypsin catalytic triad His-57, Asp-102, and Ser-195, respectively, completely abolished 3C proteolytic activity. Single substitutions were also made at either Thr-141, Gly-158, His-160, or Gly-162, which are equivalent to the trypsin specificity pocket region. Only the mutant with a conservative Thr-141 to Ser substitution exhibited proteolytic activity, which was much reduced compared with the parent. These results, together with immunoprecipitation data which indicate that Asp-85, Thr-141, and Cys-146 lie in accessible surface regions, suggest that the catalytic mechanism of picornavirus 3C cysteine proteases is closely related to that of cellular trypsin-like serine proteases.     

Roles of disulfide linkage and calcium ion-mediated interactions in assembly and disassembly of virus-like particles composed of simian virus 40 VP1 capsid protein

The simian virus 40 capsid is composed of 72 pentamers of VP1 protein. Although the capsid is known to dissociate to pentamers in vitro following simultaneous treatment with reducing and chelating agents, the functional roles of disulfide linkage and calcium ion-mediated interactions are not clear. To elucidate the roles of these interactions, we introduced amino acid substitutions in VP1 at cysteine residues and at residues involved in calcium binding. We expressed the mutant proteins in a baculovirus system and analyzed both their assembly into virus-like particles (VLPs) in insect cells and the disassembly of those VLPs in vitro. We found that disulfide linkages at both Cys-9 and Cys-104 conferred resistance to proteinase K digestion on VLPs, although neither linkage was essential for the formation of VLPs in insect cells. In particular, reduction of the disulfide linkage at Cys-9 was found to be critical for VLP dissociation to VP1 pentamers in the absence of calcium ions, indicating that disulfide linkage at Cys-9 prevents VLP dissociation, probably by increasing the stability of calcium ion binding. We found that amino acid substitutions at carboxy-terminal calcium ion binding sites (Glu-329, Glu-330, and Asp-345) resulted in the frequent formation of unusual tubular particles as well as VLPs in insect cells, indicating that these residues affect the accuracy of capsid assembly. In addition, unexpectedly, amino acid substitutions at any of the calcium ion binding sites tested, especially at Glu-157, resulted in increased stability of VLPs in the absence of calcium ions in vitro. These results suggest that appropriate affinities of calcium ion binding are responsible for both assembly and disassembly of the capsid.     

Role of aspartic acid 121 in human pancreatic ribonuclease catalysis

Bovine pancreatic ribonuclease (RNase A) is one of the most well studied enzymes of the ribonuclease family, unlike its human counterpart, the human pancreatic ribonuclease (HPR), whose physiological role in the body is not clearly understood. Human pancreatic ribonuclease consists of 128 amino acids and the main residues located in the active site of RNase A are also conserved in HPR. In the current study, to investigate the role of Asp-121 in the catalytic activity of human pancreatic ribonuclease, several variants were generated in which Asp-121 was either mutated to an alanine or C-terminal residues beyond Asp-121, and Phe-120 were deleted. The HPR mutants were cloned, expressed in E. coli and purified to homogeneity, and functionally characterized. The mutation D121A in HPR significantly decreased the rate of the enzymatic reaction, however this decrease was not universally observed for all substrates studied. Removal of the seven C-terminal amino acid residues thereby exposing Asp-121 yielded an HPR mutant with enhanced activity, however a further deletion removing Asp-121 resulted in the complete inactivation of HPR. Our results indicate that Asp-121 is crucial for the catalytic activity of HPR and may be involved in the depolymerization activity of the enzyme.     

Localization of the disulfide bond in human antithrombin III required for heparin-accelerated thrombin inactivation

Heparin accelerates the rate of inhibition of thrombin by antithrombin III. Reduction of one of the three antithrombin disulfide bonds with dithiothreitol under mild conditions abolishes this rate-enhancing effect without affecting the rate of reaction in the absence of heparin. Alkylation of mildly reduced antithrombin III with [³H]iodacetic acid followed by digestion with cyanogen bromide yielded two major labeled peptides. The smaller peptide, containing Cys-422, was identified as extending from Gly-414 to the C-terminus, Lys-424. Our data are consistent with the larger labeled peptide being the one extending from Glu-104 to Met-243 and containing Cys-239. Cys-422 has been shown by others to be linked to Cys-239. These data indicate that the sensitive disulfide bond in antithrombin III extends between Cys-239 and Cys-422; the site at which thrombin cleaves the antithrombin III is between these two half-cystines.     

Biosynthesis of Biotin-vitamers from Oleic Acid by Cryptococcus neoformans

Chitosanase (ChoA) from Mitsuaria chitosanitabida 3001 was successfully evolved with secretion efficiency and thermal stability. The inactive ChoA mutant (G151D) gene was used to mutate by an error-prone PCR technique and mutant genes that restored chitosanase activity were isolated. Two desirable mutants, designated M5S and M7T, were isolated. Two amino acids, Leu74 and Val75, in the signal peptide of ChoA were changed to Gln and Ile respectively in the M7T mutant, in addition to the G151D mutation. The L74Q/V75I double ChoA mutant was 1.5-fold higher in specific activity than wild-type ChoA due to efficient secretion of ChoA. One amino acid Asn222 was changed to Ser in the M5S mutant in addition to the G151D mutation. The N222S single ChoA mutant was 1.2-fold higher in specific activity and showed a 17% increase in thermal stability at 50 °C as compared with wild-type ChoA. This is the first study to achieve an evolutional increase in enzyme capability among chitosanses.     

Analysis of structure and function of the B subunit of cholera toxin by the use of site-directed mutagenesis

Oligonucleotide-directed mutagenesis of ctxB was used to produce mutants of cholera toxin B subunit (CT-B) altered at residues Cys-9, Gly-33, Lys-34, Arg-35, Cys-86 and Trp-88. Mutants were identified phenotypically by radial passive immune haemolysis assays and genotypically by colony hybridization with specific oligonucleotide probes. Mutant CT-B polypeptides were characterized for immunoreactivity, binding to ganglioside GM1, ability to associate with the A subunit, ability to form holotoxin, and biological activity. Amino acid substitutions that caused decreased binding of mutant CT-B to ganglioside GM1 and abolished toxicity included negatively charged or large hydrophobic residues for Gly-33 and negatively or positively charged residues for Trp-88. Substitution of lysine or arginine for Gly-33 did not affect immunoreactivity or GM1-binding activity of CT-B but abolished or reduced toxicity of the mutant holotoxins, respectively. Substitutions of Glu or Asp for Arg-35 interfered with formation of holotoxin, but none of the observed substitutions for Lys-34 or Arg-35 affected binding of CT-B to GM1. The Cys-9, Cys-86 and Trp-88 residues were important for establishing or maintaining the native conformation of CT-B or protecting the CT-B polypeptide from rapid degradation in vivo.     

Location of intrachain disulfide bonds in the VP5* and VP8* trypsin cleavage fragments of the rhesus rotavirus spike protein VP4.

Because the rotavirus spike protein VP4 contains conserved Cys residues at positions 216, 318, 380, and 774 and, for many animal rotaviruses, also at position 203, we sought to determine whether disulfide bonds were structural elements of VP4. Electrophoretic analysis of untreated and trypsin-treated rhesus rotavirus (RRV) and simain rotavirus SA11 in the presence and absence of the reducing agent dithioerythritol revealed that VP4 and its cleavage fragments VP5* and VP8* possessed intrachain disulfide bonds. Given that the VP8* fragments of RRV and SA11 contain only two Cys residues, those at positions 203 and 216, these data indicated that these two residues were covalently linked. Electrophoretic examination of truncated species of VP4 and VP4 containing Cys-->Ser mutations synthesized in reticulocyte lysates provided additional evidence that Cys-203 and Cys-216 in VP8* of RRV were linked by a disulfide bridge. VP5* expressed in vitro was able to form a disulfide bond analogous to that in the VP5* fragment of trypsin-treated RRV. Analysis of a Cys-774-->Ser mutant of VP5* showed that, while it was able to form a disulfide bond, a Cys-318-->Ser mutant of VP5* was not. These results indicated that the VP4 component of all rotaviruses, except B223, contains a disulfide bond that links Cys-318 and Cys-380 in the VP5* region of the protein. This bond is located between the trypsin cleavage site and the putative fusion domain of VP4. Because human rotaviruses lack Cys-203 and, hence, unlike many animal rotaviruses cannot possess a disulfide bond in VP8*, it is apparent that VP4 is structurally variable in nature, with human rotaviruses generally containing one disulfide linkage and animal rotaviruses generally containing two such linkages. Considered with the results of anti-VP4 antibody mapping studies, the data suggest that the disulfide bond in VP5* exists within the 2G4 epitope and may be located at the distal end of the VP4 spike on rotavirus particles.