Chemoenzymatic synthesis of feruloylated monoacyl- and diacyl-glycerols in ionic liquids

Feruloylated monoacyl- and diacyl-glycerols (FMAGs and FDAGs) are lipophilic antioxidants and potential UV absorbers. FMAGs and FDAGs were synthesized by a novel chemoenzymatic method: firstly, ferulic acid was esterified with glycerol to synthesize glyceryl ferulate, using p-toluenesulfonic acid as chemical catalyst in 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim]BF₄); secondly, glyceryl ferulate was esterified with oleic acid to synthesize FMAGs and FDAGs, using Novozym 435 as biocatalyst in 1-butyl-3-methylimidazolium hexafluorophosphate ([Bmim]PF₆). The conversion of ferulic acid and yield of glyceryl ferulate in the first reaction were both 98%. The yields of FMAGs and FDAGs in the second reaction reached 34 ± 2% and 66 ± 3%, respectively.     

Preparation of d-sorbose from d-tagatose by immobilized d-tagatose 3-epimerase

d-Tagatose 3-epimerase (d-TE) from Pseudomonas sp. ST-24 was immobilized on various types of Chitopearl beads. The highest activity was found in d-TE immobilized on Chitopearl beads of BCW 2503, the yield being about 80% of free enzyme applied. Maximum activity of the immobilized enzyme was obtained at pH 7–9 and around 60°C. The enzyme was stable in a pH range of 7–10, and below 60°C. In a high concentration (30%) of substrate, the reaction progressed without substrate inhibition. Two grams of d-sorbose crystals could be obtained from 3 g d-tagatose. Furthermore, in a batch reaction repeated five times, about 70% of d-tagatose was converted to d-sorbose each time.     

Continuous synthesis of alkyl ferulate by immobilized Candida antarctica lipase at high temperature

1-Pentyl, 1-hexyl and 1-heptyl ferulates were continuously synthesized at 60–90°C using a reactor system in which a column packed with ferulic acid powders and another column packed with immobilized Candida antarctica lipase particles were connected in series. Conversions greater than 0.9 were achieved for the synthesis of the 1-hexyl and 1-heptyl ferulates at 90°C. The system could be stably operated for the 1-heptyl ferulate synthesis at 90°C for at least two weeks.     

Engineering <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> to produce feruloyl esterase for the release of ferulic acid from switchgrass

The Aspergillus niger feruloyl esterase gene (faeA) was cloned into Saccharomyces cerevisiae via a yeast expression vector, resulting in efficient expression and secretion of the enzyme in the medium with a yield of ~2 mg/l. The recombinant enzyme was purified to homogeneity by anion-exchange and hydrophobic interaction chromatography. The specific activity was determined to be 8,200 U/μg (pH 6.5, 20°C, 3.5 mM 4-nitrophenyl ferulate). The protein had a correct N-terminal sequence of ASTQGISEDLY, indicating that the signal peptide was properly processed. The FAE exhibited an optimum pH of 6–7 and operated optimally at 50°C using ground switchgrass as the substrate. The yeast clone was demonstrated to catalyze the release of ferulic acid continuously from switchgrass in YNB medium at 30°C. This work represents the first report on engineering yeast for the breakdown of ferulic acid crosslink to facilitate consolidated bioprocessing.     

Esterification of ferulic acid with polyols using a ferulic acid esterase from Aspergillus niger

Commercially available enzyme preparations were screened for enzymes that have a high ability to catalyze direct ester-synthesis of ferulic acid with glycerol. Only a preparation, Pectinase PL “Amano” produced by Aspergillus niger, feruloylated glycerol under the experimental conditions. The enzyme responsible for the esterification was purified and characterized. This enzyme, called FAE-PL, was found to be quite similar to an A. niger ferulic acid esterase (FAE-III) in terms of molecular mass, pH and temperature optima, substrate specificity on synthetic substrates, and the N-terminal amino acid sequence. FAE-PL highly catalyzed direct esterification of ferulic acid and sinapinic acid with glycerol. FAE-PL could feruloylate monomeric sugars including arabinose, fructose, galactose, glucose, and xylose. We determined the suitable conditions for direct esterification of ferulic acid with glycerol to be as follows: 1% ferulic acid in the presence of 85% glycerol and 5% dimethyl sulfoxide at pH 4.0 and 50 °C. Under these conditions, 81% of ferulic acid could be converted to 1-glyceryl ferulate, which was identified by ¹H-NMR. The ability of 1-glyceryl ferulate to scavenge 1,1-diphenyl-2-picrylhydrazyl (DPPH) radicals was higher than that of the anti-oxidant butyl hydroxytoluene.     

Synthesis of ethyl ferulate in organic medium using celite-immobilized lipase

In the present work we have evaluated synthesis of ethyl ferulate by the esterification reaction of ferulic acid and ethanol catalyzed by a commercial lipase (Steapsin) immobilized onto celite-545 in a short period of 6 h in DMSO. The immobilized lipase was treated with cross-linking agent glutaraldehyde (1%; v/v). The optimum synthesis of ethyl ferulate was recorded at 45 °C, pH 8.5 and 1:1 ratio of ethanol and ferulic acid. Co²⁺, Ba²⁺and Pb²⁺ ions enhanced the synthesis of ethyl ferulate Hg²⁺, Cd³⁺and NH⁴⁺ ions had mild inhibitory effect. The celite-bound lipase produced 68 mM of ethyl ferulate under optimized reaction conditions.     

Immobilization of levan fructotransferase for the production of di-fructose anhydride from levan

Levan fructotransferase (LFTase) from Arthrobacter ureafaciens K2032 was immobilized on various carriers of which Chitopearl BCW2501 beads showed the higher activity of 320 U g^–1 for the formation of di-fructose anhydride compounds. The immobilized enzyme retained about 60% of its initial activity after being used for 20 cycles.     

Solvent-free synthesis of glyceryl ferulate using a commercial microbial lipase

A process was optimized for the enzymatic synthesis of glyceryl ferulate with a yield of up to 96% using a vacuum-rotary evaporation strategy under following conditions: 15 mmol glycerol, 1.5 mmol ethyl ferulate, 170 mg Candida antarctica lipase, at 60°C for 10 h and under a vacuum of 10 mm Hg. The immobilized lipase can be used 10 times.     

Solvent-free enzymatic synthesis of feruloylated diacylglycerols and kinetic study

The enzymatic esterification of glyceryl ferulate (FG) and oleic acid (OA) for feruloylated diacylglycerols (FDAG) synthesis in a solvent-free system was studied in this work. The reactions were catalyzed by different commercially available lipases, among which Novozym 435 was found to be the most active biocatalyst. The effects of glycerol in the reaction mixture and various synthesis parameters on yield of FDAG and the initial reaction rate were studied. The optimum synthesis conditions were as follows: temperature, 65 °C; enzyme load, 7.5%; substrate ratio, 7.5:1 (OA/(FG + glycerol), w/w); and reaction time, 12 h. Under the optimum conditions, the conversion of FG and yield of FDAG reached 98.0 ± 1.0% and 82.6 ± 2.2%, respectively. A linear relationship was established between the initial reaction rate and enzyme load up to 10%, which demonstrated that the influence of external mass transfer limitations on the reaction could be eliminated. The relationship between initial reaction rate and temperature was also established, based on the Arrhenius law. Novozym 435 in the present work can be used 18 times under the optimum conditions without essential losses in activity. The reaction kinetics agrees with the Ping-Pong Bi-Bi mechanism characterized by V_m and K^′_m values of 5.26 × 10⁻⁴ mol/(L min) and 0.26 mol/L, respectively.     

Influence of lignin-derived phenolic compounds on the Clostridium thermocellum endo-β-1,4-xylanase XynA

Phenolic compounds released during pretreatment of lignocellulosic biomass influence its enzymatic hydrolysis. To understand the effects of these compounds on the kinetic properties of xylan-degrading enzymes, the present study employed the recombinant cellulosomal endo-β-1,4-xylanase, thermostable GH11 XynA protein from Clostridium thermocellum, as an enzyme model to evaluate the effects of 4-hydroxybenzoic acid, gallic acid, vanillin, tannic acid, p-coumaric acid, ferulic acid, syringaldehyde, and cinnamic acid. XynA was deactivated by the assayed phenols at 60 °C, presenting the strongest deactivation in the presence of tannic acid, with an activity reduction of about 80 %. Thermal stability of XynA was influenced by ferulic acid, syringaldehyde, cinnamic acid, 4-hydroxybenzoic acid, and p-coumaric acid. The hydrolysis rate of oat-spelt xylan by XynA was influenced by temperature, being unable to hydrolyze at 40 °C in the presence of tannic acid. On hydrolysis at 60 °C, the presence of gallic and tannic acid caused a major reduction in reducing sugar production, generating 3.74 and 2.15 g.L^-1 of reducing sugar, respectively, whereas the reaction in the absence of phenols generated 4.41 g.L^-1. When XynA was pre-deactivated by phenols it could recover most of its activity at 40 °C, however, at 60 °C activity could not be reestablished.     

Purification, immobilization and characterization of linoleic acid isomerase on modified palygorskite

Linoleic acid isomerase from Lactobacillus delbrueckii subsp. bulgaricus 1.1480 was purified by DEAE ion-exchange chromatography and gel filtration chromatography. An overall 5.1% yield and purification of 93-fold were obtained. The molecular weight of the purified protein was ~41 kDa which was analyzed by SDS-PAGE. The purified enzyme was immobilized on palygorskite modified with 3-aminopropyltriethoxysilane. The immobilized enzyme showed an activity of 82 U/g. The optimal temperature and pH for the activity of the free enzyme were 30 °C and pH 6.5, respectively; whereas those for the immobilized enzyme were 35 °C and pH 7.0, respectively. The immobilized enzyme was more stable than the free enzyme at 30–60 °C, and the operational stability result showed that more than 85% of its initial activity was retained after incubation for 3 h. The K _m and V _max values of the immobilized enzyme were found to be 0.0619 mmol l⁻¹ and 0.147 mmol h⁻¹ mg⁻¹, respectively. The immobilized enzyme had high operational stability and retained high enzymatic activity after seven cycles of reuse at 37 °C.     

Enzymatic Synthesis of Cinnamic Acid Derivatives

Using Novozym 435 as catalyst, the syntheses of ethyl ferulate (EF) from ferulic acid (4-hydroxy 3-methoxy cinnamic acid) and ethanol, and octyl methoxycinnamate (OMC) from p-methoxycinnamic acid and 2-ethyl hexanol were successfully carried out in this study. A conversion of 87% was obtained within 2 days at 75 °C for the synthesis of EF. For the synthesis of OMC at 80 °C, 90% conversion can be obtained within 1 day. The use of solvent and high reaction temperature resulted in better conversion for the synthesis of cinnamic acid derivatives. Some cinnamic acid esters could also be obtained with higher conversion and shorter reaction times in comparison to other methods reported in the literature. The enzyme can be reused several times before significant activity loss was observed. Revisions requested 10 January 2006; Revisions received 17 January 2006     

Entrapment of β-galactosidase in polyvinylalcohol hydrogel

β-Galactosidase isolated from Aspergillus oryzae was immobilized in lens-shaped polyvinylalcohol capsules (with activity 25 U g⁻¹) giving 32% of its original activity. Immobilization did not change the pH optimum (4.5) of lactose hydrolysis. The relative enzyme activity during product inhibition testing was, in average, 10% higher for immobilized enzyme. No decrease of activity was observed after 35 repeated batch runs and during 530 h of continuous hydrolysis of lactose (10%, w/v) at 45°C. The immobilized enzyme was stable for 14 months without any change of activity during the storage at 4°C and pH 4.5.     

Stabilization of d-amino acid oxidase from Rhodosporidium toruloides by immobilization onto magnetic nanoparticles

d-Amino acid oxidase from Rhodosporidium toruloides was immobilized onto glutaraldehyde-activated magnetic nanoparticles. Approximately four enzyme molecules were attached to one magnetic nanoparticle when the weight ratio of the enzyme to the support was 0.12. After immobilization, the T _m was increased from 45°C of the free form to 55°C. In the presence of 20 mM H₂O₂, the immobilized form retained 93% of its activity after 5 h while the free form was completely inactivated after 3.5 h.     

Immobilization of glucose oxidase on Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/SiO<Subscript>2</Subscript> magnetic nanoparticles

Glucose oxidase (GOD) was covalently immobilized onto Fe₃O₄/SiO₂ magnetic nanoparticles (FSMNs) using glutaraldehyde (GA). Optimal immobilization was at pH 6 with 3-aminopropyltriethoxysilane at 2% (v/v), GA at 3% (v/v) and 0.143 g GOD per g carrier. The activity of immobilized GOD was 4,570 U/g at pH 7 and 50°C. The immobilized GOD retained 80% of its initial activity after 6 h at 45°C while free enzyme retained only 20% activity. The immobilized GOD maintained 60% of its initial activity after 6 cycles of repeated use and retained 75% of its initial activity after 1 month at 4°C whereas free enzymes retained 62% of its activity.     

Production of a novel glycerol-inducible lipase from thermophilic <Emphasis Type="Italic">Geobacillus stearothermophilus</Emphasis> strain-5

In a screening program for isolation of thermophilic lipase-producing bacteria, a number of thermophilic bacteria were isolated from desert soil from Baltim, Egypt. Among 55 isolates, a potent bacterial candidate (starin-5) was characterized and identified by biochemical and PCR techniques, based on 16S rRNA sequencing. Phylogenetic analysis revealed its closeness to geobacilli especially the thermophilic Geobacillus stearothermophilus with optimal growth and lipolytic enzyme activity at 60°C and pH 7.0. An inducible nature of lipolytic enzyme synthesis using glycerol and glucose was demonstrated. Approximately, 94–100% of the original activity was retained due to thermal stability of the crude enzyme after heat treatment for 15 min at 30–60°C. The enzyme retained 84.84% of its original activity during incubation at 70°C (pH 8.0) for 15 min. Lipase enzyme from G. stearothermophilus strain-5 was immobilized on various carriers and the most suitable carrier was chitin that showed 73.03% of activity yield.     

Lipase-catalysed synthesis of esters of ferulic acid with natural compounds and evaluation of their antioxidant properties

Lipases from Candida antarctica (Novozyme 435^®), Candida rugosa, Chromobacterium viscosum and Pseudomonas sp. were used to perform transesterifications of vinyl ferulate with hydroxyl-steroids and p-arbutin. The antioxidant activity of the products was evaluated using the free radical 2,2′-diphenyl-1-picrylhydrazyl (DPPH) and 2,2′-azinobis-(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) free radical quenching antioxidant assays, and inhibition of the oxidation of low-density lipoprotein, LDL. Arbutin ferulate was found to possess a 19% higher antiradical activity against the ABTS free radical than its precursor ferulic acid, and it also inhibited the oxidation of LDL more efficiently (by 10%) than its precursors. All of the biocatalytically synthesised products exhibited higher antioxidant activity than Trolox, the well known commercial benchmark antioxidant, and their precursor, ferulic acid.     

Immobilization of glycolate oxidase from Medicago falcata on magnetic nanoparticles for application in biosynthesis of glyoxylic acid

Glycolate oxidase was isolated from Medicago falcata Linn. after a screening from 13 kinds of C₃ plant leaves, with higher specific activity than the enzyme from spinach. The M. falcata glycolate oxidase (MFGO) was partially purified and then immobilized onto hydrothermally synthesized magnetic nanoparticles via physical adsorption. The magnetic nanoparticles were characterized with scanning electron microscope (SEM), transmission electron microscopy (TEM) and Fourier transform infrared (FT-IR) spectroscopy. The maximum load of MFGO was 56 mg/g support and the activity recovery was 45%. Immobilization of MFGO onto magnetic nanoparticles enhanced the enzyme stability, and the optimum temperature was significantly increased from 15 °C to 30 °C. The immobilized biocatalyst was successfully used in a batch reactor for repeated oxidization of glycolic acid to synthesize glyoxylic acid, retaining ca. 70% of its initial activity after 4 cycles of reaction at 30 °C for nearly 70 h, and its half-life was calculated to be 117 h.     

A type B feruloyl esterase from <Emphasis Type="Italic">Aspergillus nidulans</Emphasis> with broad pH applicability

A hypothetical protein AN1772.2 of Aspergillus nidulans was found to have a 56% identity with a known type C ferulic acid esterase (FAE) from Talaromyces stipitatus. In addition, it contained a 13-amino acid conserved region flanking the characteristic G-X-S-X-G motif of a serine esterase, suggesting a FAE function for the protein. The putative FAE was successfully cloned from the genomic DNA and expressed in Saccharomyces cerevisiae. The recombinant protein exhibited high FAE activities. Therefore, its function as an FAE was unequivocally determined. About 86% of the enzyme activity was found in the growth medium, indicating that the native signal peptide was effective in the yeast expression system. The recombinant FAE was purified to its homogeneity, and subsequently characterized. The FAE is stable over an unusually wide range of pH (4.0–9.5), has a pH optimum of 7.0, and a temperature optimum of 45°C. A substrate specificity profiling reveals that the enzyme is a type B FAE, despite its strong sequence homology with type C FAEs, raising an interesting question on the role of the conserved region in substrate specificity.     

Production and characterization of ferulic acid esterase activity in crude extracts by Streptomyces avermitilis CECT 3339

Streptomyces avermitilis CECT 3339 produces extracellular ferulic acid esterase (FAE) activity during growth on a range of lignocellulose substrates. Maximal levels of FAE activity were detected in culture filtrates from S. avermitilis CECT 3339 grown in media containing wheat bran and yeast extract as carbon and nitrogen sources respectively. Biochemical characterization of this enzyme activity revealed that it was 100-fold higher when wheat bran was pretreated with Celluclast (a mix of hydrolytic enzymes). FAE was found to be end-product-inhibited. Characterization of the properties of the enzyme showed that FAE exhibited an activity optimum pH at 6 with pH stability between pH 6 and 8. The optimum temperature was 50 °C while the temperature stability was between 30 °C and 40 °C, with rapid inactivation at 60 °C and above. The characteristics and stability of FAE from S. avermitilis CECT 3339 suggest a potential role for this enzyme in combination with endoxylanases for the upgrading of plant-residue silage and for biopulping. Received: 17 November 1997 / Received revision: 13 March 1998 / Accepted: 13 April 1998