Anaerobic degradation of poly-3-hydroxybutyrate and poly-3-hydroxybutyrate-co-3-hydroxyvalerate

The anaerobic degradation of the polyesters poly-3-hydroxybutyrate (PHB) and poly-3-hydroxybutyrate-co-3-hydroxyvalerate (PHBV) was investigated with special regard to intermediate products, kinetics, and yields. During the degradation of PHBV acetate, propionate, n-butyrate, and n-valerate were detected. Additionally, 3-hydroxybutyrate and 3-hydroxyvalerate and four dimeric esters of these two molecules were identified by GC-MS measurements. Three different test systems for the anaerobic degradation of polyesters were studied. It was not possible to get reproducible results by means of the Anaerobic Sturm-test, a simple system based on carbon dioxide measurement. Secondly, a system based on the GC measurement of accumulated organic acids was investigated. A degradation of 90% in two days was calculated by a carbon balance. Best results were reached with the third test system based on the measurement of methane with a gas meter. A degradation of 99% was observed within 30 days.     

Organization and regulation of polyhydroxybutyrate/valerate biosynthesis in bacteria

Recent data on the biosynthesis of poly(3-hydroxybutyrate) (PHB) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHB/V) and its regulation in bacteria are reviewed, with special emphasis on the properties and regulation of the relevant enzymes and their genes. Some conditions promoting the synthesis of PHB and PHB/V by natural, mutant, and recombinant producers are considered.     

Biosynthesis of Poly(3-Hydroxybutyrate) and Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate) and Its Regulation in Bacteria

Recent data on the biosynthesis of poly(3-hydroxybutyrate) (PHB) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and its regulation in bacteria are reviewed, with special emphasis on the properties and regulation of the relevant enzymes and their genes. Some conditions promoting the synthesis of PHB and PHBV by natural, mutant, and recombinant producers are considered.     

Metabolic engineering of Alcaligenes eutrophus through the transformation of cloned phbCAB genes for the investigation of the regulatory mechanism of polyhydroxyalkanoate biosynthesis

The regulatory mechanisms of the biosynthesis of in vivo poly-beta-hydroxybutyrate [PHB] and poly(3-hydroxybutyrate-3-hydroxyvalerate) [P(3HB-3HV)] of Alcaligenes eutrophus were investigated by using various transformants with enzyme activities that were modified through the transformation of cloned phbCAB genes. The biosynthesis rates of PHB and P(3HB-3HV) were controlled by beta-ketothiolase and acetoacetyl-CoA reductase, and especially by beta-ketothiolase condensing acetyl-CoA or propionyl-CoA. The contents of PHB and P(3HB-3HV) were controlled by PHB synthase, polymerizing 3-hydroxybutyrate to PHB or 3-hydroxybutyrate and 3-hydroxyvalerate to P(3HB-3HV). The molar fraction of 3-hydroxyvalerate in P(3HB-3HV) was also closely connected with PHB synthase. This may be due to the accelerated polymerization between 3-HB from glycolysis pathway and 3-HV converted from propionate supplied as precursor. Enforced beta-ketothiolase and acetoacetyl-CoA reductase to PHB synthase tended to enlarge the size of the PHB and P(3HB-3HV) granules, however, higher activity ratio of PHB synthase to beta-ketothiolase and acetoacetyl-CoA reductase than parent strain tended to induce the number of granules.     

Polyhydroxyalkanoate production in recombinant Escherichia coli

Abstract The bacterial species Escherichia coli has proven to be a powerful tool in the molecular analysis of polyhydroxyalkanoate (PHA) biosynthesis. In addition, E. coli holds promise as a source for economical PHA production. Using this microorganism, clones have been developed in our laboratory which direct the synthesis of poly-β-hydroxybutyrate (PHB) to levels as high as 95% of the cell dry weight. These clones have been further enhanced by the addition of a genetically mediated lysis system that allows the PHB granules to be released gently and efficiently. This paper describes these developments, as well as the use of an E. coli strain to produce the copolymer poly-(3-hydroxybutyrate- co -3-hydroxyvalerate (PHB- co -3-).     

Production of poly-\-hydroxybutyrate in Acinetobacter spp. isolated from activated sludge

Two strains of Acinetobacter sp. isolated from activated sludge actively removing phosphate were examined for their abilities to produce poly-\-hydroxybutyrate (PHB). When yield-limited by phosphate, strain RA3117 contained material that stained with Sudan Black, but contained only 0.9% PHB on a dry weight basis. This strain contained no sudanophilic material or PHB when limited by ammonia or sulphate. When strain RA3757 was limited by phosphate, ammonia or sulphate it produced 2.0, 7.8 and 11.5% PHB, respectively, on a dry weight basis. \-Ketothiolase and acetoacetyl-coenzyme A (CoA) reductase were only observed in RA3757 cell-free extracts. \-Ketothiolase was produced both in cells with and without PHB whereas acetoacetyl-CoA reductase was found only in cells accumulating PHB. When RA3757 was grown in ammonia-limiting medium with acetate, butyrate, caproate or ethanol as carbon source, similar levels of PHB were produced. When cells were grown on valerate, RA3757 produced 5.6 poly-\-hydroxyvalerate and 0.9% PHB on a dry weight basis. Correspondence to: J. W. May     

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) synthesis in Nostoc muscorum from biodiesel industry waste: a sustainable model of bioplastic production

Journal of Applied Phycology - Poly-3-hydroxybutyrate-co-hydroxyvalerate [P(HB-co-HV)] co-polymer has superior material properties than poly-3-hydroxybutyrate (PHB) and hence exhibits wide...     

Degradation of poly (3-hydroxybutyrate) and its copolymer poly (3-hydroxybutyrate-co-3-hydroxyvalerate) by a marine Streptomyces sp. SNG9

A marine Streptomyces sp. SNG9 was characterized by its ability to utilize poly(3-hydroxybutyrate) (PHB) and its copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate P (3HB-co-HV). The bacterium grew efficiently in a simple mineral liquid medium enriched with 0.1% poly(3-hydroxybutyrate) powder as the sole carbon source. Cells excreted PHB depolymerase and degraded the polymer particles to complete clarity in 4 days. The degradation activity was detectable by the formation of a clear zone around the colony (petri plates) or a clear depth under the colony (test tubes). The expression of PHB depolymerase was repressed by the presence of simple soluble carbon sources. Bacterial degradation of the naturally occurring sheets of poly(3-hydroxybutyrate) and its copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) was observed by scanning electron microscopy (SEM). Morphological alterations of the polymers sheets were evidence for bacterial hydrolysis.     

Degradation of poly (3-hydroxybutyrate) and its copolymer poly (3-hydroxybutyrate-co-3-hydroxyvalerate) by a marine Streptomyces sp. SNG9.

A marine Streptomyces sp. SNG9 was characterized by its ability to utilize poly(3-hydroxybutyrate) (PHB) and its copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate P (3HB-co-HV). The bacterium grew efficiently in a simple mineral liquid medium enriched with 0.1% poly(3-hydroxybutyrate) powder as the sole carbon source. Cells excreted PHB depolymerase and degraded the polymer particles to complete clarity in 4 days. The degradation activity was detectable by the formation of a clear zone around the colony (petri plates) or a clear depth under the colony (test tubes). The expression of PHB depolymerase was repressed by the presence of simple soluble carbon sources. Bacterial degradation of the naturally occurring sheets of poly(3-hydroxybutyrate) and its copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) was observed by scanning electron microscopy (SEM). Morphological alterations of the polymers sheets were evidence for bacterial hydrolysis.     

Synthesis of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) from activated sludge

Poly-3-hydroxybutyrate (PHB) and poly(3-hydroxybutyrate- co-3-hydroxyvalerate) (PHBV) was produced using a co-culture of activated sludge. When butyric acid was used as sole carbon source, PHB was produced. When valeric acid was added to the medium, PHBV was produced. The 3-hydroxyvalerate (3HV) mole fraction in the PHBV reached a maximum of 54% when valeric acid was used as sole carbon source. When the 3HV units in the co-polymer increased from 0.0 to 54.0 mol%, the melting temperature ( T m ) decreased from 178 to 99°C. The composition, and hence the mechanical properties, of the co-polymer produced by activated sludge can be controlled by adjusting the medium composition.     

聚羟基烷酸酯 (PHA) 改性研究进展

本文简述了生物制造聚羟基烷酸酯(PHA),包括聚3-羟基丁酸酯(PHB)、聚(3-羟基丁酸酯-3-羟基戊酸酯)(PHBV)、聚(3-羟基丁酸酯-4-羟基丁酸酯)(P3/4HB)、聚(3-羟基丁酸酯-3-羟基己酸酯)(PHBH)的产业化现状,综述了针对PHA材料热稳定性差、加工窗口较窄等缺点而进行的一些改性研究。选用适当方法对PHA进行改性,可使其性能得到优化,应用领域得到拓展。     

盐单胞菌利用短链脂肪酸合成聚羟基脂肪酸酯

盐单胞菌(Halomonas)能够利用多种底物为碳源生长,由于其能在高盐条件下进行不灭菌的开放发酵,已被开发用作下一代生物技术的底盘细胞.包括乙酸、丙酸和丁酸在内的短链挥发性脂肪酸能够以生物质为原料制备,有望成为用于微生物发酵的新型碳源.利用10-50g/L浓度的丁酸为碳源对Halomonas sp.TD01和TD08...     

Production of polyhydroxyalkanoates from methanol by a new methylotrophic bacterium Methylobacterium sp. GW2

A new bacterial strain, isolated from groundwater contaminated with explosives, was characterized as a pink-pigmented facultative methylotroph, affiliated to the genus Methylobacterium. The bacterial isolate designated as strain GW2 was found capable of producing the homopolymer poly-3-hydroxybutyrate (PHB) from various carbon sources such as methanol, ethanol, and succinate. Methanol acted as the best substrate for the production of PHB reaching 40 % w/w dry biomass. PHB accumulation was observed to be a growth-associated process, so that there was no need for two-step fermentation. Optimal growth occurred at 0.5 % (v/v) methanol concentration, and growth was strongly inhibited at concentration above 2 % (v/v). Methylobacterium sp. strain GW2 was also able to accumulate the copolyester poly-3-hydroxybutyrate-poly-3-hydroxyvalerate (PHB/HV) when valeric acid was supplied as an auxiliary carbon source to methanol. After 66 h, a copolymer content of 30 % (w/w) was achieved with a PHB to PHV ratio of 1:2. Biopolymers produced by strain GW2 had an average molecular weight ranging from 229,350 to 233,050 Da for homopolymer PHB and from 362,430 to 411,300 Da for the copolymer PHB/HV.     

Accumulation of a poly(hydroxyalkanoate) copolymer containing primarily 3-hydroxyvalerate from simple carbohydrate substrates by Rhodococcus sp. NCIMB 40126

A number of taxonomically-related bacteria have been identified which accumulate poly(hydroxyalkanoate) (PHA) copolymers containing primarily 3-hydroxyvalerate (3HV) monomer units from a range of unrelated single carbon sources. One of these, Rhodococcus sp. NCIMB 40126, was further investigated and shown to produce a copolymer containing 75 mol% 3HV and 25 mol% 3-hydroxybutyrate (3HB) from glucose as sole carbon source. Polyesters containing both 3HV and 3HB monomer units, together with 4-hydroxybutyrate (4HB), 5-hydroxyvalerate (5HV) or 3-hydroxyhexanoate (3HHx), were also produced by this organism from certain accumulation substrates. With valeric acid as substrate, almost pure (99 mol% 3HV) poly(3-hydroxyvalerate) was produced. N.m.r. analysis confirmed the composition of these polyesters. The thermal properties and molecular weight of the copolymer produced from glucose were comparable to those of PHB produced by Alcaligenes eutrophus.     

Nutritional flexibility of oligotrophic and copiotrophic Antarctic bacteria with respect to organic substrates

Abstract Alcaligenes eutrophus can accumulate poly-3-hydroxybutyrate (PHB) or polyhydroxyalkanoate (PHA) containing only 3-hydroxybutyrate (HB) and 3-hydroxyvalerate (HV) units. Granule-associated PHB-synthase was active with d (−)-3-hydroxybutyryl-CoA and d (−)-3-hydroxyvaleryl-CoA of the range of d (−)- and l (+)-3-hydroxyacyl-CoA substrates tested (C₄–C₁₀). In carbon-limited cultures, PHB-synthase was predominantly soluble, becoming granule-associated on transition to nitrogen limitation. Granule-associated PHB-synthase increased in activity at least up to pH 10.0 and K _m values of 0.68 mM and 1.63 mM were determined for the C₄ and C₅ substrates, respectively, at pH 8.5. The soluble PHB-synthase, which was unstable, showed equal activity in the range pH 8.0–10.0, had a K _m value for d (−)-3-hydroxybutyryl-CoA of 0.72 mM and an M _r of 160,000. PHB does not measurably turn over under steady-state polymer-accumulating conditions.     

Effect of static magnetic field on synthesis of polyhydroxyalkanoates from different short-chain fatty acids by activated sludge

The effect of static magnetic field on the production of polyhydroxyalkanoates (PHAs) from different short-chain fatty acids by activated sludge process under aerobic dynamic feeding (ADF) technique was evaluated in four sequencing batch reactors (SBRs) with static magnetic field intensity of 42 mT (SBR1), 21 mT (SBR2), 7 mT (SBR3), 0 mT (SBR4), respectively. It was demonstrated that the static magnetic exposure had definitely influenced the biosynthesis of PHAs when acetate, butyrate and propionate were fed solely or each two mixture or three substrates mixture, and the effect was dependent on field strength: the maximum poly-3-hydroxybutyrate (PHB) production occurring at 7 mT, and the minimum one at 42 mT; the maximum poly-3-hydroxyvalerate (PHV) production occurring at 21 mT, and the minimum one at 0 mT.     

The synthesis of short- and medium-chain-length poly(hydroxyalkanoate) mixtures from glucose- or alkanoic acid-grown <Emphasis Type="Italic">Pseudomonas oleovorans</Emphasis>

Pseudomonas oleovorans NRRL B-778 accumulated mixtures of poly-3-hydroxybutyrate (PHB) and medium-chain-length poly(hydroxyalkanoates) (mcl-PHAs) when grown on glucose, octanoic acid or oleic acid, whereas growth on nonanoic acid or undecanoic acid resulted in copolymers of poly-3-hydroxybutyrate-co-3-hydroxyvalerate (PHB-co-HV). Acetone fractionation verified the presence of PHB/mcl-PHA mixtures. The acetone-insoluble (AIS) fractions of the polymers derived from glucose (PHA-glucose), octanoic acid (PHA-octanoic) and oleic acid (PHA-oleic) were exclusively PHB while the acetone-soluble (AS) fractions contained mcl-PHA composed of differing ratios of 3-hydroxy-acid monomer units, which ranged in chain length from 6 to 14 carbon atoms. In contrast, both the AIS and AS fractions from the polymers derived from nonanoic acid (PHA-nonanoic) and undecanoic acid (PHA-undecanoic) were composed of comparable ratios of 3-hydroxybutyrate (3HB) and 3-hydroxyvalerate (3HV). The unfractionated PHA-glucose, PHA-octanoic and PHA-oleic polymers had melting temperatures (T _m) between 177 and 179°C, enthalpies of fusion (ΔH _f) of 20 cal/g and glass transition temperatures (T _g) of 3–4°C. This was due to the large PHB content in the polymer mixtures. On the other hand, the PHA-nonanoic and PHA-undecanoic polymers had thermal properties that supported their copolymer nature. In both cases, the T _m values were 161°C, ΔH _f values were 7cal/g and T _g values were −3°C. Journal of Industrial Microbiology & Biotechnology (2002) 28, 147–153 DOI: 10.1038/sj/jim/7000231 Received 30 July 2001/ Accepted in revised form 04 November 2001     

Isolation of poly(3-hydroxybutyrate) (PHB)-degrading microorganisms and characterization of PHB-depolymerase from Arthrobacter sp. strain W6.

Microbial degraders of poly(3-hydroxybutyrate) (PHB) were isolated from soil. Arthrobacter sp. strain W6 used not only PHB as a carbon source, but also PHAs such as poly(3-hydroxybutyrate-co-[5%]3-hydroxyvalerate), poly(3-hydroxybutyrate-co-[14%]3-hydroxyvalerate), and poly(3-hydroxybutyrate-co-[22%]3-hydroxyvalerate). PHB-depolymerase was purified to homogeneity from the culture broth of Arthrobacter sp. strain W6 by a procedure involving DEAE- and butyl-Toyopearl column chromatographies. The Mr of the enzyme was estimated to be about 47,000 by SDS-polyacrylamide gel electrophoresis. The enzyme was most active at pH 8.5 and 50 degrees C, and was inhibited by phenylmethylsulfonyl fluoride, Hg2+, Ag+, and Pb2+.     

开放条件下高聚β-羟基丁酸酯含量的甲烷氧化混合菌群的富集

目的:在开放条件下以甲烷为底物富集高聚β-羟基丁酸酯(PHB)含量的甲烷氧化菌群,获得能够利用低成本碳源高产PHB的菌种。方法:采用丰盛-饥饿模式间歇供料,以甲烷为底物,好氧开放式培养甲烷氧化混合菌群,利用苏丹黑染色法动态检测丰盛和饥饿阶段胞内PHB含量的变化,以此为基础考察丰盛-饥饿期比例对富集高PHB含量的甲烷氧化菌群的影响。结果:丰盛-饥饿期比例为1∶3时,微生物PHB含量从17.7%增加到35.5%,且开放培养过程中菌群结构稳定。结论:通过丰盛-饥饿模式间歇供料开放式培养所得的高PHB含量的稳定的甲烷氧化菌群,具有工业生产PHB的应用价值。     

Poly-β-hydroxybutyrate accumulation in cyanobacteria under photoautotrophy

Poly-β-hydroxybutyrate (PHB) is a biodegradable and biocompatible polymer that has immense potential in the field of environmental, agricultural and biomedical sciences. An alternative host system has been explored in this study for low-cost production. Examination of 25 cyanobacterial species from 19 different genera for photoautrophic production of polyhydroxyalkanoates (PHAs) under batch culture demonstrated that 20 species were poly-β-hydroxybutyrate (PHB) accumulators, while others were found to be negative. Presence of PHB was confirmed by UV-spectroscopy, (1)H-NMR spectroscopy and GC-MS analysis. Accumulation of PHB in cyanobacteria was found to be species specific. The PHB extracted from Nostoc muscorum exhibited comparable material properties with the commercial PHB, thus advocating its potential applications in various fields.