Monomer-monomer interactions drive the prepore to pore conversion of a beta-barrel-forming cholesterol-dependent cytolysin.

Perfringolysin O (PFO), a cholesterol-dependent cytolysin, forms large oligomeric pore complexes comprised of up to 50 PFO molecules. In the present studies a mutant of PFO (PFO(Y181A)) has been identified that traps PFO in a multimeric prepore complex that cannot insert its transmembrane beta-hairpins and therefore cannot form a pore. Remarkably, PFO(Y181A) can be induced to insert its transmembrane beta-hairpins if functional PFO is incorporated into the PFO(Y181A) oligomeric prepore complex. Furthermore, the transition from prepore to pore appears to be an "all or none" process; partial insertion of the transmembrane beta-barrel does not occur. Therefore, cooperative interactions between the monomers of the prepore drive the prepore to pore conversion that results in the formation of the transmembrane beta-barrel.     

The mechanism of pore assembly for a cholesterol-dependent cytolysin: formation of a large prepore complex precedes the insertion of the transmembrane beta-hairpins

Perfringolysin O (PFO) is a member of the cholesterol-dependent cytolysin (CDC) family of membrane-penetrating toxins. The CDCs form large homooligomers (estimated to be comprised of up to 50 CDC monomers) that are responsible for generating a large pore in cholesterol-containing membranes of eukaryotic cells. The assembly of the PFO cytolytic complex was examined to determine whether it forms an oligomeric prepore complex on the membrane prior to the insertion of its membrane-spanning beta-sheet. A PFO oligomeric complex was formed on liposomes at both 4 degrees C and 37 degrees C and shown by SDS-agarose gel electrophoresis to be comprised of a large, comparatively homogeneous complex instead of a distribution of oligomer sizes. At low temperature, the processes of oligomerization and membrane insertion could be resolved, and PFO was found to form an oligomer without significant membrane insertion of its beta-hairpins. Furthermore, PFO was found to increase the ion conductivity through a planar bilayer by large and discrete stepwise changes in conductance that are consistent with the insertion of a preassembled pore complex into the bilayer. The combined results of these analyses strongly support the hypothesis that PFO forms a large oligomeric prepore complex on the membrane surface prior to the insertion of its transmembrane beta-sheet.     

Prepore to pore transition of a cholesterol-dependent cytolysin visualized by electron microscopy

Perfringolysin O (PFO), a soluble toxin secreted by the pathogenic Clostridium perfringens, forms large homo-oligomeric pore complexes comprising up to 50 PFO molecules in cholesterol-containing membranes. In this study, electron microscopy (EM) and single-particle image analysis were used to reconstruct two-dimensional (2D) projection maps from images of oligomeric PFO prepore and pore complexes formed on cholesterol-rich lipid layers. The projection maps are characterized by an outer and an inner ring of density peaks. The outer rings of the prepore and pore complexes are very similar; however, the protein densities that make up the inner ring of the pore complex are more intense and discretely resolved than they are for the prepore complex. The change in inner-ring protein density is consistent with a mechanism in which the monomers within the prepore complex make a transition from a partially disordered state to a more ordered transmembrane beta-barrel in the pore complex. Finally, the orientation of the monomers within the oligomeric complexes was determined by visualization of streptavidin (SA) molecules bound to biotinylated cysteine-substituted residues predicted to face either the inner or outer surface of the oligomeric pore complex. This study provides an unprecedented view of the conversion of the PFO prepore to pore complex.     

Vertical collapse of a cytolysin prepore moves its transmembrane beta-hairpins to the membrane

Perfringolysin O (PFO) is a prototype of the large family of pore-forming cholesterol-dependent cytolysins (CDCs). A central enigma of the cytolytic mechanism of the CDCs is that their membrane-spanning beta-hairpins (the transmembrane amphipathic beta-hairpins (TMHs)) appear to be approximately 40 A too far above the membrane surface to cross the bilayer and form the pore. We now present evidence, using atomic force microscopy (AFM), of a significant difference in the height by which the prepore and pore protrude from the membrane surface: 113+/-5 A for the prepore but only 73+/-5 A for the pore. Time-lapse AFM micrographs show this change in height in real time. Moreover, the monomers in both complexes exhibit nearly identical surface features and these results in combination with those of spectrofluorimetric analyses indicate that the monomers remain in a perpendicular orientation to the bilayer plane during this transition. Therefore, the PFO undergoes a vertical collapse that brings its TMHs to the membrane surface so that they can extend across the bilayer to form the beta-barrel pore.     

The identification and structure of the membrane-spanning domain of the Clostridium septicum alpha toxin

Alpha toxin (AT) is a pore-forming toxin produced by Clostridium septicum that belongs to the unique aerolysin-like family of pore-forming toxins. The location and structure of the transmembrane domains of these toxins have remained elusive. Using deletion mutagenesis, cysteine-scanning mutagenesis and multiple spectrofluorimetric methods a membrane-spanning amphipathic beta-hairpin of AT has been identified. Spectrofluorimetric analysis of cysteine-substituted residues modified with an environmentally sensitive fluorescent probe via the cysteine sulfydryl showed that the side chains of residues 203-232 alternated between the aqueous milieu and the membrane core when the AT oligomer was inserted into membranes, consistent with the formation of an amphipathic transmembrane beta-hairpin. AT derivatives that contained deletions that removed up to 90% of the beta-hairpin did not form a pore but were similar to native toxin in all other aspects of the mechanism. Furthermore, a mutant of AT that contained an engineered disulfide, predicted to restrict the movement of the beta-hairpin, functioned similarly to native toxin except that it did not form a pore unless the disulfide bond was reduced. Together these studies revealed the location and structure of the membrane-spanning domain of AT.     

Cross-linking between helices within subunit a of Escherichia coli ATP synthase defines the transmembrane packing of a four-helix bundle

Subunit a of F(1)F(0) ATP synthase is required in the H(+) transport driven rotation of the c-ring of F(0), the rotation of which is coupled to ATP synthesis in F(1). The three-dimensional structure of subunit a is unknown. In this study, Cys substitutions were introduced into two different transmembrane helices (TMHs) of subunit a, and the proximity of the thiol side chains was tested via attempted oxidative cross-linking to form the disulfide bond. Pairs of Cys substitutions were made in TMHs 2/3, 2/4, 2/5, 3/4, 3/5, and 4/5. Cu(+2)-catalyzed oxidation led to cross-link formation between Cys pairs L120C(TMH2) and S144C(TMH3), L120C(TMH2) and G218C(TMH4), L120C(TMH2) and H245C(TMH5), L120C(TMH2) and I246C(TMH5), N148C(TMH3) and E219C(TMH4), N148C(TMH3) and H245C(TMH5), and G218C(TMH4) and I248C(TMH5). Iodine, but not Cu(+2), was found to catalyze cross-link formation between D119C(TMH2) and G218C(TMH4). The results suggest that TMHs 2, 3, 4, and 5 form a four-helix bundle with one set of key functional residues in TMH4 (Ser-206, Arg-210, and Asn-214) located at the periphery facing subunit c. Other key residues in TMHs 2, 4, and 5, which were concluded previously to compose a possible aqueous access pathway from the periplasm, were found to locate to the inside of the four-helix bundle.     

The Disulfide Bond Cys255-Cys279 in the Immunoglobulin-Like Domain of Anthrax Toxin Receptor 2 Is Required for Membrane Insertion of Anthrax Protective Antigen Pore

Anthrax toxin receptors act as molecular clamps or switches that control anthrax toxin entry, pH-dependent pore formation, and translocation of enzymatic moieties across the endosomal membranes. We previously reported that reduction of the disulfide bonds in the immunoglobulin-like (Ig) domain of the anthrax toxin receptor 2 (ANTXR2) inhibited the function of the protective antigen (PA) pore. In the present study, the disulfide linkage in the Ig domain was identified as Cys255-Cys279 and Cys230-Cys315. Specific disulfide bond deletion mutants were achieved by replacing Cys residues with Ala residues. Deletion of the disulfide bond C255-C279, but not C230-C315, inhibited the PA pore-induced release of the fluorescence dyes from the liposomes, suggesting that C255-C279 is essential for PA pore function. Furthermore, we found that deletion of C255-C279 did not affect PA prepore-to-pore conversion, but inhibited PA pore membrane insertion by trapping the PA membrane-inserting loops in proteinaceous hydrophobic pockets. Fluorescence spectra of Trp59, a residue adjacent to the PA-binding motif in von Willebrand factor A (VWA) domain of ANTXR2, showed that deletion of C255-C279 resulted in a significant conformational change on the receptor ectodomain. The disulfide deletion-induced conformational change on the VWA domain was further confirmed by single-particle 3D reconstruction of the negatively stained PA-receptor heptameric complexes. Together, the biochemical and structural data obtained in this study provides a mechanistic insight into the role of the receptor disulfide bond C255-C279 in anthrax toxin action. Manipulation of the redox states of the receptor, specifically targeting to C255-C279, may become a novel strategy to treat anthrax.     

Membrane Damage by an α-Helical Pore-forming Protein,Equinatoxin II,Proceeds through a Succession of Ordered Steps

Actinoporin equinatoxin II (EqtII) is an archetypal example of α-helical pore-forming toxins that porate cellular membranes by the use of α-helices. Previous studies proposed several steps in the pore formation: binding of monomeric protein onto the membrane, followed by oligomerization and insertion of the N-terminal α-helix into the lipid bilayer. We studied these separate steps with an EqtII triple cysteine mutant. The mutant was engineered to monitor the insertion of the N terminus into the lipid bilayer by labeling Cys-18 with a fluorescence probe and at the same time to control the flexibility of the N-terminal region by the disulfide bond formed between cysteines introduced at positions 8 and 69. The insertion of the N terminus into the membrane proceeded shortly after the toxin binding and was followed by oligomerization. The oxidized, non-lytic, form of the mutant was still able to bind to membranes and oligomerize at the same level as the wild-type or the reduced form. However, the kinetics of the N-terminal helix insertion, the release of calcein from erythrocyte ghosts, and hemolysis of erythrocytes was much slower when membrane-bound oxidized mutant was reduced by the addition of the reductant. Results show that the N-terminal region needs to be inserted in the lipid membrane before the oligomerization into the final pore and imply that there is no need for a stable prepore formation. This is different from β-pore-forming toxins that often form β-barrel pores via a stable prepore complex.     

Arresting and releasing Staphylococcal alpha-hemolysin at intermediate stages of pore formation by engineered disulfide bonds

alpha-Hemolysin (alphaHL) is secreted by Staphylococcus aureus as a water-soluble monomer that assembles into a heptamer to form a transmembrane pore on a target membrane. The crystal structures of the LukF water-soluble monomer and the membrane-bound alpha-hemolysin heptamer show that large conformational changes occur during assembly. However, the mechanism of assembly and pore formation is still unclear, primarily because of the difficulty in obtaining structural information on assembly intermediates. Our goal is to use disulfide bonds to selectively arrest and release alphaHL from intermediate stages of the assembly process and to use these mutants to test mechanistic hypotheses. To accomplish this, we created four double cysteine mutants, D108C/K154C (alphaHL-A), M113C/K147C (alphaHL-B), H48C/ N121C (alphaHL-C), I5C/G130C (alphaHL-D), in which disulfide bonds may form between the pre-stem domain and the beta-sandwich domain to prevent pre-stem rearrangement and membrane insertion. Among the four mutants, alphaHL-A is remarkably stable, is produced at a level at least 10-fold greater than that of the wild-type protein, is monomeric in aqueous solution, and has hemolytic activity that can be regulated by the presence or absence of reducing agents. Cross-linking analysis showed that alphaHL-A assembles on a membrane into an oligomer, which is likely to be a heptamer, in the absence of a reducing agent, suggesting that oxidized alphaHL-A is halted at a heptameric prepore state. Therefore, conformational rearrangements at positions 108 and 154 are critical for the completion of alphaHL assembly but are not essential for membrane binding or for formation of an oligomeric prepore intermediate.     

Assembly and topography of the prepore complex in cholesterol-dependent cytolysins

Cholesterol-dependent cytolysins are a family of poreforming proteins that have been shown to be virulence factors for a large number of pathogenic bacteria. The mechanism of pore formation for these toxins involves a complex series of events that are known to include binding, oligomerization, and insertion of a transmembrane beta-barrel. Several features of this mechanism remain poorly understood and controversial. Whereas a prepore mechanism has been proposed for perfringolysin O, a very different mechanism has been proposed for the homologous member of the family, streptolysin O. To distinguish between the two models, a novel approach that directly measures the dimension of transmembranes pores was used. Pore formation itself was examined for both cytolysins by encapsulating fluorescein-labeled peptides and proteins of different sizes into liposomes. When these liposomes were re-suspended in a solution containing anti-fluorescein antibodies, toxin-mediated pore formation was monitored directly by the quenching of fluorescein emission as the encapsulated molecules were released, and the dyes were bound by the antibodies. The analysis of pore formation determined using this approach reveals that only large pores are produced by perfringolysin O and streptolysin O during insertion (and not small pores that grow in size). These results are consistent only with the formation of a prepore complex intermediate prior to insertion of the transmembrane beta-barrel into the bilayer. Fluorescence quenching experiments also revealed that PFO in the prepore complex contacts the membrane via domain 4, and that the individual transmembrane beta-hairpins in domain 3 are not exposed to the nonpolar core of the bilayer at this intermediate stage.     

The mechanism of membrane insertion for a cholesterol-dependent cytolysin: a novel paradigm for pore-forming toxins.

Perfringolysin O (PFO), a water-soluble monomeric cytolysin secreted by pathogenic Clostridium perfringens, oligomerizes and forms large pores upon encountering cholesterol-containing membranes. Whereas all pore-forming bacterial toxins examined previously have been shown to penetrate the membrane using a single amphipathic beta hairpin per polypeptide, cysteine-scanning mutagenesis and multiple independent fluorescence techniques here reveal that each PFO monomer contains a second domain involved in pore formation, and that each of the two amphipathic beta hairpins completely spans the membrane. In the soluble monomer, these transmembrane segments are folded into six alpha helices. The insertion of two transmembrane hairpins per toxin monomer and the major change in secondary structure are striking and define a novel paradigm for the mechanism of membrane insertion by a cytolytic toxin.     

Insertion of anthrax protective antigen into liposomal membranes: effects of a receptor

Protective antigen (PA), the receptor-binding component of anthrax toxin, heptamerizes and inserts into the endosomal membrane at acidic pH, forming a pore that mediates translocation of the enzymic components of the toxin to the cytosol. When the heptameric pre-insertion form of PA (the prepore) is acidified in solution, it rapidly loses the ability to insert into membranes. To maximize insertion into model membranes, we examined two ways to bind the protein to large unilamellar vesicles (LUV). One involved attaching a His tag to the von Willebrand factor A domain of one of the PA receptors, ANTXR2, and using this protein as a bridge to bind PA to LUV containing a nickel-chelating lipid. The other involved using a His tag fused to the C terminus of PA to bind the protein directly to LUV containing the same lipid. Both ways enhanced pore formation at pH 5.0 strongly and about equally, as measured by the release of K+. Controls showed that pore formation in this system faithfully reproduced that in vivo. We also showed that binding unmodified ANTXR2 von Willebrand factor A to the prepore in solution enhanced its pore forming activity by slowing its inactivation at acidic pH. These findings indicate that an important role of PA receptors is to promote partitioning of PA into the bilayer by maintaining the prepore close to the target membrane and presumably in the optimal orientation as it undergoes the acidic pH-dependent conformational transition to the pore.     

Trapping of Vibrio cholerae Cytolysin in the Membrane-bound Monomeric State Blocks Membrane Insertion and Functional Pore Formation by the Toxin

Vibrio cholerae cytolysin (VCC) is a potent membrane-damaging cytolytic toxin that belongs to the family of β barrel pore-forming protein toxins. VCC induces lysis of its target eukaryotic cells by forming transmembrane oligomeric β barrel pores. The mechanism of membrane pore formation by VCC follows the overall scheme of the archetypical β barrel pore-forming protein toxin mode of action, in which the water-soluble monomeric form of the toxin first binds to the target cell membrane, then assembles into a prepore oligomeric intermediate, and finally converts into the functional transmembrane oligomeric β barrel pore. However, there exists a vast knowledge gap in our understanding regarding the intricate details of the membrane pore formation process employed by VCC. In particular, the membrane oligomerization and membrane insertion steps of the process have only been described to a limited extent. In this study, we determined the key residues in VCC that are critical to trigger membrane oligomerization of the toxin. Alteration of such key residues traps the toxin in its membrane-bound monomeric state and abrogates subsequent oligomerization, membrane insertion, and functional transmembrane pore-formation events. The results obtained from our study also suggest that the membrane insertion of VCC depends critically on the oligomerization process and that it cannot be initiated in the membrane-bound monomeric form of the toxin. In sum, our study, for the first time, dissects membrane binding from the subsequent oligomerization and membrane insertion steps and, thus, defines the exact sequence of events in the membrane pore formation process by VCC.     

Specific protein-membrane contacts are required for prepore and pore assembly by a cholesterol-dependent cytolysin

Three short hydrophobic loops and a conserved undecapeptide at the tip of domain 4 (D4) of the cholesterol-dependent cytolysins (CDCs) mediate the binding of the CDC monomers to cholesterol-rich cell membranes. But intermedilysin (ILY), from Streptococcus intermedius, does not bind to cholesterol-rich membranes unless they contain the human protein CD59. This observation suggested that the D4 loops, which include loops L1-L3 and the undecapeptide, of ILY were no longer required for its cell binding. However, we show here that membrane insertion of the D4 loops is required for the cytolysis by ILY. Receptor binding triggers changes in the structure of ILY that are necessary for oligomerization, but membrane insertion of the D4 loops is critical for oligomer assembly and pore formation. Defects that prevent membrane insertion of the undecapeptide also block assembly of the prepore oligomer, while defects in the membrane insertion of the L1-L3 loops prevent the conversion of the prepore oligomer to the pore complex. These studies reveal that pore formation by ILY, and probably other CDCs, is affected by an intricate and coupled sequence of interactions between domain 4 and the membrane.     

Structural basis of pore formation by the bacterial toxin pneumolysin

The bacterial toxin pneumolysin is released as a soluble monomer that kills target cells by assembling into large oligomeric rings and forming pores in cholesterol-containing membranes. Using cryo-EM and image processing, we have determined the structures of membrane-surface bound (prepore) and inserted-pore oligomer forms, providing a direct observation of the conformational transition into the pore form of a cholesterol-dependent cytolysin. In the pore structure, the domains of the monomer separate and double over into an arch, forming a wall sealing the bilayer around the pore. This transformation is accomplished by substantial refolding of two of the four protein domains along with deformation of the membrane. Extension of protein density into the bilayer supports earlier predictions that the protein inserts beta hairpins into the membrane. With an oligomer size of up to 44 subunits in the pore, this assembly creates a transmembrane channel 260 A in diameter lined by 176 beta strands.     

Structural insights into the membrane-anchoring mechanism of a cholesterol-dependent cytolysin

Perfringolysin O (PFO), a cytolytic toxin secreted by pathogenic Clostridium perfringens, forms large pores in cholesterol-containing membranes. Domain 4 (D4) of the protein interacts first with the membrane and is responsible for cholesterol recognition. By using several independent fluorescence techniques, we have determined the topography of D4 in the membrane-inserted oligomeric form of the toxin. Only the short hydrophobic loops at the tip of the D4 beta-sandwich are exposed to the bilayer interior, whereas the remainder of D4 projects from the membrane surface and is surrounded by water, making little or no contact with adjacent protein monomers in the oligomer. Thus, a limited interaction of D4 with the bilayer core seems to be sufficient to accomplish cholesterol recognition and initial binding of PFO to the membrane. Furthermore, D4 serves as the fulcrum around which extensive structural changes occur during the formation and insertion of the large transmembrane beta-barrel into the bilayer.     

Structural interactions between transmembrane helices 4 and 5 of subunit a and the subunit c ring of Escherichia coli ATP synthase

Subunit a plays a key role in promoting H+ transport and the coupled rotary motion of the subunit c ring in F1F0-ATP synthase. H+ binding and release occur at Asp-61 in the middle of the second transmembrane helix (TMH) of F0 subunit c. H+ are thought to reach Asp-61 via aqueous pathways mapping to the surfaces of TMHs 2-5 of subunit a. TMH4 of subunit a is thought to pack close to TMH2 of subunit c based upon disulfide cross-link formation between Cys substitutions in both TMHs. Here we substituted Cys into the fifth TMH of subunit a and the second TMH of subunit c and tested for cross-linking using bis-methanethiosulfonate (bis-MTS) reagents. A total of 62 Cys pairs were tested and 12 positive cross-links were identified with variable alkyl length linkers. Cross-linking was achieved near the middle of the bilayer for the Cys pairs a248C/c62C, a248C/ c63C, a248C/c65C, a251C/c57C, a251C/c59C, a251C/c62C, a252C/c62C, and a252C/c65C. Cross-linking was achieved near the cytoplasmic side of the bilayer for Cys pairs a262C/c53C, a262C/c54C, a262C/c55C, and a263C/c54C. We conclude that both aTMH4 and aTMH5 pack proximately to cTMH2 of the c-ring. In other experiments we demonstrate that aTMH4 and aTMH5 can be simultaneously cross-linked to different subunit c monomers in the c-ring. Five mutants showed pH-dependent cross-linking consistent with aTMH5 changing conformation at lower pH values to facilitate cross-linking. We suggest that the pH-dependent conformational change may be related to the proposed role of aTMH5 in gating H+ access from the periplasm to the cAsp-61 residue in cTMH2.     

Engineered zinc-binding sites confirm proximity and orientation of transmembrane helices I and III in the human serotonin transporter

The human serotonin transporter (hSERT) regulates neurotransmission by removing released serotonin (5-HT) from the synapse. Previous studies identified residues in SERT transmembrane helices (TMHs) I and III as interaction sites for substrates and antagonists. Despite an abundance of data supporting a 12-TMH topology, the arrangement of the TMHs in SERT and other biogenic amine transporters remains undetermined. A high-resolution structure of a bacterial leucine transporter that demonstrates homology with SERT has been reported, thus providing the basis for the development of a SERT model. Zn2+-binding sites have been utilized in transporters and receptors to define experimentally TMH proximity. Focusing on residues near the extracellular ends of hSERT TMHs I and III, we engineered potential Zn2+-binding sites between V102 or W103 (TMH I) and I179-L184 (TMH III). Residues were mutated to either histidine or cysteine. TMH I/III double mutants were constructed from functional TMH I mutants, and Zn2+ sensitivity was assessed. Dose-response assays suggest an approximately twofold increase in sensitivity to Zn2+ inhibition at the hSERT V102C/M180C and approximately fourfold at the V102C/I179C mutant compared to the hSERT V102C single mutant. We propose that the increased sensitivity to Zn2+ confirms the proximity and the orientation of TMHs I and III in the membrane. Homology modeling of the proposed Zn2+-binding sites using the coordinates of the Aquifex aeolicus leucine transporter structure provided a structural basis for interpreting the results and developing conclusions.     

Membrane Insertion of Marginally Hydrophobic Transmembrane Helices Depends on Sequence Context

In mammalian cells, most integral membrane proteins are initially inserted into the endoplasmic reticulum membrane by the so-called Sec61 translocon. However, recent predictions suggest that many transmembrane helices (TMHs) in multispanning membrane proteins are not sufficiently hydrophobic to be recognized as such by the translocon. In this study, we have screened 16 marginally hydrophobic TMHs from membrane proteins of known three-dimensional structure. Indeed, most of these TMHs do not insert efficiently into the endoplasmic reticulum membrane by themselves. To test if loops or TMHs immediately upstream or downstream of a marginally hydrophobic helix might influence the insertion efficiency, insertion of marginally hydrophobic helices was also studied in the presence of their neighboring loops and helices. The results show that flanking loops and nearest-neighbor TMHs are sufficient to ensure the insertion of many marginally hydrophobic helices. However, for at least two of the marginally hydrophobic helices, the local interactions are not enough, indicating that post-insertional rearrangements are involved in the folding of these proteins.     

Effects of 'hydrophobic mismatch' on the location of transmembrane helices in the ER membrane

We have studied the effects of 'hydrophobic mismatch' between a poly-Leu transmembrane helix (TMH) and the ER membrane using a glycosylation mapping approach. The simplest interpretation of our results is that the lumenal end of the TMH is located deeper in the membrane for both short (negative mismatch) and long (positive mismatch) TMHs than for poly-Leu segments of intermediate length. We further find that the position-specific effect of Lys residues on the location of short TMHs in the membrane varies with an apparent helical periodicity when the Lys residue is moved along the poly-Leu stretch. We discuss these findings in the context of models for peptide-lipid interactions during hydrophobic mismatch.