Allelic Association, Chemical Characterization and Saccharification Properties of brown midrib Mutants of Sorghum (Sorghum bicolor (L.) Moench)

Genetic improvement of biomass crops can significantly reduce the overall cost of biomass-to-ethanol conversion. The conversion of cellulose to monomeric sugar units is affected by lignin content and composition. Sorghum has attracted the attention of the scientific and industrial community as a promising source of biomass for bioenergy due to its great yield potential and tolerance to stresses. The brown midrib (bmr) mutants of sorghum are characterized by brown vascular tissue associated with altered lignin content. Twenty-eight bmr mutants have been identified since the late 1970s, but the allelic relationships have not been fully established, and the function of only one of the Bmr loci has been unequivocally established. In this study, we combined genetic and chemical approaches to establish that there are mutations at least four independent bmr loci, represented by the bmr2, bmr6, bmr12 and bmr19 groups. Since each allelic group presents unique staining characteristics, rapid classification of emerging bmr lines into the existing groups can be achieved using phloroglucinol-HCl as a histochemical stain. In addition, pyrolysis-gas chromatography-mass spectrometry, enabled the characterization of changes in subunit lignin composition in each of the allelic groups, to help predict the genes underlying the mutations. Enzymatic saccharification of stover from plants representing each allelic bmr group demonstrated that lignin changes in lines belonging to the bmr2, bmr6 and bmr12 groups can increase glucose yields, up to 25% compared to wild-type isolines. In order to expedite the selection of the bmr mutant alleles in breeding populations, we have developed molecular markers specific for bmr7 and bmr25, two novel mutant alleles of the gene encoding caffeic acid O-methyl transferase. Based on the results from this study, we propose to rename the bmr mutants in a manner that reflects the number of independent loci.     

Enhancing alfalfa conversion efficiencies for sugar recovery and ethanol production by altering lignin composition

Alfalfa (Medicago sativa L.) biomass was evaluated for biochemical conversion into ethanol using dilute-acid and ammonia pretreatments. The two alfalfa lines compared were a reduced S-lignin transgenic cultivar generated through down regulation of the caffeic acid O-methyltransferase gene and a wild-type control. Both were harvested at two maturities. All the samples had similar carbohydrate contents including a mean composition of 316 g glucan and 497 g total neutral carbohydrates per kg dry biomass, which corresponds to a theoretic ethanol yield of 382 l/ton. Ethanol yields for alfalfa stems pretreated with dilute-acid were significantly impacted by harvest maturity and lignin composition, whereas when pretreated with dilute-ammonia, yield was solely affected by lignin composition. Use of a recombinant xylose-fermenting Saccharomyces strain, for converting the ammonia pretreated alfalfa samples, further increased ethanol yields. Ethanol yields for the xylose-fermenting yeast were 232-278 l/ton and were significantly enhanced for the reduced S lignin cultivars.     

Biomass and Cellulosic Ethanol Production of Forage Sorghum Under Limited Water Conditions

This study presents results from a 2-year evaluation of biomass and cellulosic ethanol (EtOH) production potential of forage sorghum (Sorghum bicolor L. Moench) cultivars differing in brown midrib trait (i.e., bmr12) under dryland (no irrigation) and limited irrigation (2.88 mm?day^?1; subsurface drip) in the semiarid Southern High Plains of the USA. Commercial cultivar Sorghum Partners 1990 (SP 1990, conventional non-bmr) produced significantly more biomass (29–62 %) than a bmr12 cultivar PaceSetter bmr (PS bmr) under irrigated and dryland conditions during both years of this study. However, PS bmr biomass had higher cellulosic EtOH conversion efficiency than SP 1990 in both years according to simultaneous saccharification and fermentation analysis. Irrigation resulted in 26–49 % more biomass and 28–72 % more cellulosic EtOH production during both growing seasons, indicating that limited irrigation had favorable effects on both biomass and biofuel production. In the first year, when precipitation was below average, both cultivars produced similar amounts of cellulosic EtOH. During the second year, when precipitation was above average, higher biomass production of SP 1990 resulted in 28 % higher cellulosic EtOH production than PS bmr when averaged across both irrigated and dryland conditions. The large range of cellulosic EtOH production (1,600 to 3,380 L?ha^?1) during the 2 years of this study was primarily driven by differences in water availability that resulted from precipitation and irrigation. Our findings indicates that chemical composition and biomass yield potential of sorghum cultivars are critical factors that affect biomass and biofuel production under limited water conditions.     

Improved sugar yields from biomass sorghum feedstocks: comparing low-lignin mutants and pretreatment chemistries

Background

For biofuel production processes to be economically efficient, it is essential to maximize the production of monomeric carbohydrates from the structural carbohydrates of feedstocks. One strategy for maximizing carbohydrate production is to identify less recalcitrant feedstock cultivars by performing some type of experimental screening on a large and diverse set of candidate materials, or by identifying genetic modifications (random or directed mutations or transgenic plants) that provide decreased recalcitrance. Economic efficiency can also be increased using additional pretreatment processes such as deacetylation, which uses dilute NaOH to remove the acetyl groups of hemicellulose prior to dilute acid pretreatment. In this work, we used a laboratory-scale screening tool that mimics relevant thermochemical pretreatment conditions to compare the total sugar yield of three near-isogenic brown midrib (bmr) mutant lines and the wild-type (WT) sorghum cultivar. We then compared results obtained from the laboratory-scale screening pretreatment assay to a large-scale pretreatment system.

Results

After pretreatment and enzymatic hydrolysis, the bmr mutants had higher total sugar yields than the WT sorghum cultivar. Increased pretreatment temperatures increased reactivity for all sorghum samples reducing the differences observed at lower reaction temperatures. Deacetylation prior to dilute acid pretreatment increased the total sugar yield for all four sorghum samples, and reduced the differences in total sugar yields among them, but solubilized a sizable fraction of the non-structural carbohydrates. The general trends of increased total sugar yield in the bmr mutant compared to the WT seen at the laboratory scale were observed at the large-scale system. However, in the larger reactor system, the measured total sugar yields were lower and the difference in total sugar yield between the WT and bmr sorghum was larger.

Conclusions

Sorghum bmr mutants, which have a reduced lignin content showed higher total sugar yields than the WT cultivar after dilute acid pretreatment and enzymatic hydrolysis. Deacetylation prior to dilute acid pretreatment increased the total sugar yield for all four sorghum samples. However, since deacetylation also solubilizes a large fraction of the non-structural carbohydrates, the ability to derive value from these solubilized sugars will depend greatly on the proposed conversion process.

     

Molecular characterization of allelic variation in spontaneous brown midrib mutants of sorghum (Sorghum bicolor (L.) Moench)

Modification of lignin composition and content are important to enhance the saccharification potential of lignocellulosic biomass. Brown midrib (bmr) mutants with altered lignin and enhanced glucose yields are a valuable resource for modification of the lignin biosynthetic pathway in sorghum (Sorghum bicolor (L.) Moench). Of the 38 bmr mutants reported in sorghum, some have been classified into four independent groups, namely bmr2, bmr6, bmr12 and bmr19, based on the allelic test, and a few have been characterized at the molecular level. The bmr2, bmr6 and bmr12 groups have mutations that impair 4-coumarate:coenzyme A ligase (4CL), cinnamyl alcohol dehydrogenase (CAD2) and caffeic O-methyltransferase (COMT), respectively. The molecular basis of bmr19 is unknown. In the present study, four spontaneous bmr mutants of sorghum were analyzed for allelic variation at two candidate gene loci. cDNAs of CAD2 and COMT genes were cloned and sequenced from these mutants. Sequence analysis revealed that two of these mutants, IS23789 and IS23253, share a new allele of CAD2. These mutants have a G-to-C transversion at position 3699 of the genomic sequence that leads to glycine-to-arginine (G191R) substitution in the CAD2 protein sequence. This mutation lies in the highly conserved glycine-rich motif ¹⁸⁸G(X)GGV(L)G¹⁹³ that participates in the binding of the pyrophosphate group of NADP⁺ cofactor and hence might impair the activity of CAD2. Phloroglucinol staining of midribs of these mutants also showed a dark wine-red color that is characteristic of the bmr6 group. These two mutants can be distinguished by an intron length polymorphic marker developed based on the COMT gene sequence in this study. Mutant IS23549, which has also been assigned to the bmr6 group, was found to have another new allele with alanine-to-valine (A164V) substitution in CAD2. Alanine-164 is highly conserved among MDR proteins in plants and hence may be necessary for the activity of the enzyme. In mutant IS11861, there was no mutation that led to a change in amino acid in CAD2, while a threonine-to-serine (T302S) substitution was found in COMT. This single nucleotide polymorphism (SNP) at position 2645 in the COMT gene was converted into a cleaved amplified polymorphic sequence marker that can be used for its identification. In addition, additional SNP- and/or indel-based markers were developed, which can be used for exploiting these alleles in the molecular breeding of sorghum for dedicated bioenergy feedstock.     

Direct Image-Based Enumeration of Clostridium phytofermentans Cells on Insoluble Plant Biomass Growth Substrates

A dual-fluorescent-dye protocol to visualize and quantify Clostridium phytofermentans ISDg (ATCC 700394) cells growing on insoluble cellulosic substrates was developed by combining calcofluor white staining of the growth substrate with cell staining using the nucleic acid dye Syto 9. Cell growth, cell substrate attachment, and fermentation product formation were investigated in cultures containing either Whatman no. 1 filter paper, wild-type Sorghum bicolor, or a reduced-lignin S. bicolor double mutant (bmr-6 bmr-12 double mutant) as the growth substrate. After 3 days of growth, cell numbers in cultures grown on filter paper as the substrate were 6.0- and 2.2-fold higher than cell numbers in cultures with wild-type sorghum and double mutant sorghum, respectively. However, cells produced more ethanol per cell when grown with either sorghum substrate than with filter paper as the substrate. Ethanol yields of cultures were significantly higher with double mutant sorghum than with wild-type sorghum or filter paper as the substrate. Moreover, ethanol production correlated with cell attachment in sorghum cultures: 90% of cells were directly attached to the double mutant sorghum substrate, while only 76% of cells were attached to wild-type sorghum substrate. With filter paper as the growth substrate, ethanol production was correlated with cell number; however, with either wild-type or mutant sorghum, ethanol production did not correlate with cell number, suggesting that only a portion of the microbial cell population was active during growth on sorghum. The dual-staining procedure described here may be used to visualize and enumerate cells directly on insoluble cellulosic substrates, enabling in-depth studies of interactions of microbes with plant biomass.     

Ethanol yields and cell wall properties in divergently bred switchgrass genotypes

Genetic modification of herbaceous plant cell walls to increase biofuels yields is a primary bioenergy research goal. Using two switchgrass populations developed by divergent breeding for ruminant digestibility, the contributions of several wall-related factors to ethanol yields was evaluated. Field grown low lignin plants significantly out yielded high lignin plants for conversion to ethanol by 39.1% and extraction of xylans by 12%. However, across all plants analyzed, greater than 50% of the variation in ethanol yields was attributable to changes in tissue and cell wall architecture, and responses of stem biomass to dilute-acid pretreatment. Although lignin levels were lower in the most efficiently converted genotypes, no apparent correlation were seen in the lignin monomer G/S ratios. Plants with higher ethanol yields were associated with an apparent decrease in the lignification of the cortical sclerenchyma, and a marked decrease in the granularity of the cell walls following dilute-acid pretreatment.     

Genetic background impacts soluble and cell wall-bound aromatics in <Emphasis Type="Italic">brown midrib</Emphasis> mutants of sorghum

Sorghum (Sorghum bicolor (L.). Moench) BMR-6 and BMR-12 encode cinnamylalcohol dehydrogenase and caffeic acid-O-methyltransferase, respectively. We have evaluated the impact of two bmr alleles, bmr-6 and bmr-12, respectively, on soluble and wall-bound aromatics in near isogenic, wild-type (WT), bmr-6, bmr-12 and double-mutant (DM; bmr-6 and bmr-12) plants in two genetic backgrounds, RTx430 and Wheatland. Immunoblots confirmed that COMT protein was essentially absent in bmr-12 and DM plants, but was present in bmr-6 and WT plants. In contrast, although CAD activity was not detected in bmr-6 and DM plants, proteins crossreacting to anti-CAD sera were found in stem extracts from all genotypes. In both sorghum backgrounds, WT plants had lowest amounts of free aromatics, higher levels of cell wall-bound pCA and FA esters and guaiacyl (G), syringyl (S), and p-hydroxyphenyl (H) lignins. Soluble aromatics and cell wall phenolic ester content in Wheatland DM plants resembled that of Wheatland bmr-6 plants, whereas in the RTx430 background, levels of these components in the DM plants more closely resembled those observed in bmr-12 plants. In both backgrounds, bmr-6 plants exhibited reduced levels of G, S, and H lignins relative to WT, and increased incorporation of G-indene into lignin. In bmr-12 plants, there was greater incorporation of G- and 5-hydroxyguaiacyl (5-OHG) lignin into cell walls. Histochemical staining of internode sections from Wheatland plants indicated that apparent lignification of cortical sclerenchyma and vascular bundle fibers was greatest and most uniform in WT plants. Relative staining intensity of these tissues was decreased in bmr-6, followed by bmr-12 plants. DM plants exhibited poor staining of cortical sclerenchyma and vascular bundle fibers. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users. Mention of trade names or commercial products in this publication is solely for the purpose of providing specific information and does not imply recommendation or endorsement by the U.S. Department of Agriculture.     

Simultaneous saccharification and fermentation (SSF) of <Emphasis Type="Italic">Jatropha curcas</Emphasis> shells: utilization of co-products from the biodiesel production process

Jatropha curcas has great potential as an oil crop for use in biodiesel applications, and the outer shell is rich in lignocellulose that may be converted to ethanol, giving rise to the concept of a biorefinery. In this study, two dilute pretreatments of 0.5% H₂SO₄ and 1.0% NaOH were performed on Jatropha shells with subsequent simultaneous saccharification and fermentation (SSF) of the pretreated water-insoluble solids (WIS) to evaluate the effect of inhibitors in the pretreatment slurry. A cellulase loading of 15 FPU/g WIS, complimented with an excess of cellobiase (19.25 U/g), was used for SSF of either the washed WIS or the original slurry to determine the effect of inhibitors. Ethanol and glucose were monitored during SSF of 20 g of pretreated biomass. The unwashed slurry showed to have a positive effect on SSF efficiency for the NaOH-pretreated biomass. Maximum efficiencies of glucan conversion to ethanol in the WIS were 40.43% and 41.03% for the H₂SO₄- and NaOH-pretreated biomasses, respectively.     

A Rapid Simultaneous Saccharification and Fermentation (SSF) Technique to Determine Ethanol Yields

We have developed a relatively simple simultaneous saccharification and fermentation (SSF) technique to determine the ethanol production potential for large sets of biomass samples. The technique is based on soaking approximately 0.5 grams of a biomass sample in aqueous ammonia at room temperature and at atmospheric pressure for 24 h, then fermenting with Saccharomyces cerevisiae D₅A for 24 h using Spezyme CP, for enzymatic hydrolysis of structural polysaccharides. We have tested the technique on a set of corn stover samples representing much of the genetic variability in the commercial corn hybrid population. The samples were weighed into modified Ankom filter bags (F57) before soaking to avoid biomass loss during the process. Fermentation samples were analyzed for ethanol after 24 h by HPLC. Percentages of theoretical maximum ethanol yields of the samples ranged between 44.9 and 73%. We observed that percentages of theoretical maximum ethanol yields were highly correlated (r ²?=?0.90) with acid detergent lignin concentration while a low correlation was observed between cellulose concentration and ethanol yield. Near infrared spectra of corn stover samples were also examined. The coefficient of determination (r ²) from regression of predicted versus measured percent theoretical maximum ethanol yield was 0.96. This result suggests that using NIRS is a promising method for predicting ethanol yield, but larger calibration sets are necessary for obtaining improved accuracy for larger sample populations. We conclude that the developed SSF technique could be applied to large numbers of biomass samples to rapidly estimate ethanol yields and to compare different biomass samples in terms of ethanol yields.     

An Induced Sorghum Mutant Population Suitable for Bioenergy Research

The sorghum [Sorghum bicolor (L.) Moench] inbred line BTx623 has served as a parent for development of several mapping populations, also providing a source for the generation of DNA libraries for physical mapping, and as the inbred line selected for sorghum genome sequencing. Since genetic mapping, physical mapping and genome sequencing are all based on the same inbred line, these genetic resources have made the genome study of sorghum very efficient. However, in comparison with other model species, there is one important genetic resource still missing in the sorghum research community, a mutant population. A systematically annotated mutant population will facilitate many avenues of research, especially those focusing on functional genomics and bioenergy research. Here we report the generation of a sorghum mutant population derived from the inbred line BTx623 by treatment with the chemical agent ethyl methanesulfonate (EMS). The mutant population consists of 1,600 pedigreed M₃ families; each of them was derived from an independent M₁ seed. Many lines displayed traits such as brown midrib (bmr), erect leaves (erl), multiple tillers (mtl), and late flowering (lfl), characteristics useful for bioenergy research. Results from our phenotyping and genotyping studies indicate that this mutant population will be a valuable and useful genetic resource for both sorghum functional genomics and bioenergy research.     

Simultaneous Saccharification and Ethanol Fermentation of Corn Stover at High Temperature and High Solids Loading by a Thermotolerant Strain Saccharomyces cerevisiae DQ1

The thermotolerant strain Saccharomyces cerevisiae DQ1 was applied to the simultaneous saccharification and fermentation (SSF) at high temperature and high solids loading of the dilute acid-pretreated corn stover in the present study. The SSF using S. cerevisiae DQ1 was operated at 30?% solids loading of the pretreated corn stover with three-step SSF mode and achieved up to ethanol titer of 48?g/L and yield of 65.6?%. S. cerevisiae DQ1 showed strong thermotolerance in both the regular one-step SSF and the three-step SSF with changing temperature in each step. The three-step SSF at 40°C using S. cerevisiae DQ1 tolerated the greater cellulase dosage and solids loading of the pretreated corn stover and resulted in increased ethanol production. The present study provided a practical potential for the future SSF of lignocellulose feedstock at high temperature to reach high ethanol titer.     

Effect of anatomical fractionation on the enzymatic hydrolysis of acid and alkaline pretreated corn stover

Due to concerns with biomass collection systems and soil sustainability there are opportunities to investigate the optimal plant fractions to collect for conversion. An ideal feedstock would require a low severity pretreatment to release a maximum amount of sugar during enzymatic hydrolysis. Corn stover fractions were separated manually and analyzed for glucan, xylan, acid soluble lignin, acid insoluble lignin, and ash composition. The stover fractions were also pretreated with either 0%, 0.4%, or 0.8% NaOH for 2 h at room temperature, washed, autoclaved and saccharified. In addition, dilute sulfuric acid pretreated samples underwent simultaneous saccharification and fermentation (SSF) to ethanol. In general, the two pretreatments produced similar trends with cobs, husks, and leaves responding best to the pretreatments, the tops of stalks responding slightly less, and the bottom of the stalks responding the least. For example, corn husks pretreated with 0.8% NaOH released over 90% (standard error of 3.8%) of the available glucan, while only 45% (standard error of 1.1%) of the glucan was produced from identically treated stalk bottoms. Estimates of the theoretical ethanol yield using acid pretreatment followed by SSF were 65% (standard error of 15.9%) for husks and 29% (standard error of 1.8%) for stalk bottoms. This suggests that integration of biomass collection systems to remove sustainable feedstocks could be integrated with the processes within a biorefinery to minimize overall ethanol production costs.     

Accumulation of Biomass and Compositional Change Over the Growth Season for Six Photoperiod Sorghum Lines

Biomass sorghums [Sorghum bicolor (L.) Moench] are short-day photoperiod sensitive (PS) types, meaning that the crop will grow vegetatively late into the fall season in subtropical and temperate environments. This feature results in high biomass yield potential and mitigates drought susceptibility. The objective of this study is to assess biomass growth patterns and associated changes in composition over a growing season for PS sorghum. The experiment had a split-plot design with two replications, six PS sorghum genotypes, and 13 harvest dates. Harvest started at 60 days after planting (DAP) and continued every 15 days thereafter in both College Station (CS) and Corpus Christi (CC) in Texas, 2010. At each harvest, dry biomass yield, plant height and biomass composition (percent lignin and cellulose) were measured. For all genotypes, biomass accumulation followed a standard growth pattern which included an early lag phase, followed by a log phase of growth and finally, a general reduction in the rate of accumulation. The early lag phase ended at approximately 70 DAP, the log phase of growth ended at approximately 125 DAP, and biomass yields maximized between 180 and 225 DAP. The highest yielding genotype produced 24 Mg ha^?1. Plant heights up to 400 cm were also measured between 180 and 225 DAP. Plant height and biomass yield patterns were similar, indicating that height is important to increase yield. Lignin and cellulose concentrations increased with time; at the highest yields (between 180 and 225 DAP), maximum lignin content were 14.5 to 15.5 % and maximum cellulose content was 31 to 32 %. As with yield potential, significant differences were detected for composition as well. The growth curves indicate that PS biomass sorghum yields sufficiently and can be harvested as early as 130 DAP with maximum sorghum biomass accumulation occurring between 180 and 225 days. Thus, with careful selection and deployment of biomass sorghum hybrids, the harvest season of biomass sorghum can be extended over a 3-month period in southern regions of the US     

Identification and Characterization of Four Missense Mutations in Brown midrib 12 (Bmr12), the Caffeic O-Methyltranferase (COMT) of Sorghum

Modifying lignin content and composition are targets to improve bioenergy crops for cellulosic conversion to biofuels. In sorghum and other C4 grasses, the brown midrib mutants have been shown to reduce lignin content and alter its composition. Bmr12 encodes the sorghum caffeic O-methyltransferase, which catalyzes the penultimate step in monolignol biosynthesis. From an EMS-mutagenized TILLING population, four bmr12 mutants were isolated. DNA sequencing identified the four missense mutations in the Bmr12 coding region, which changed evolutionarily conserved amino acids Ala71Val, Pro150Leu, Gly225Asp, and Gly325Ser. The previously characterized bmr12 mutants all contain premature stop codons. These newly identified mutants, along with the previously characterized bmr12-ref, represent the first allelic series of bmr12 mutants available in the same genetic background. The impacts of these newly identified mutations on protein accumulation, enzyme activity, Klason lignin content, lignin subunit composition, and saccharification yield were determined. Gly225Asp mutant greatly reduced protein accumulation, and Pro150Leu and Gly325Ser greatly impaired enzyme activity compared to wild type (WT). All four mutants significantly reduced Klason lignin content and altered lignin composition resulting in a significantly reduced S/G ratio relative to WT, but the overall impact of these mutations was less severe than bmr12-ref. Except for Gly325Ser, which is a hypomorphic mutant, all mutants increased the saccharification yield relative to WT. These mutants represent new tools to decrease lignin content and S/G ratio, possibly leading toward the ability to tailor lignin content and composition in the bioenergy grass sorghum.     

Ethanol production from lignocellulosic biomass of energy cane

Ethanol produced from lignocellulosic biomass is a renewable alternative to diminishing petroleum based liquid fuels. The release of many new sugarcane varieties by the United States Department of Agriculture to be used as energy crops is a promising feedstock alternative. Energy cane produces large amounts of biomass that can be easily transported, and production does not compete with food supply and prices because energy cane can be grown on marginal land instead of land for food crops. The purpose of this study was to evaluate energy cane for lignocellulosic ethanol production. Energy cane variety L 79-1002 was pretreated with weak sulfuric acid to remove lignin. In this study, 1.4 M sulfuric acid pretreated type II energy cane had a higher ethanol yield after fermentation by Klebsiella oxytoca without enzymatic saccharification than 0.8 M and 1.6 M sulfuric acid pretreated type II energy cane. Pretreated biomass was inoculated with K. oxytoca for cellulose fermentation and Pichia stipitis for hemicellulose fermentation under simultaneous saccahrification and fermentation (SSF) and separate hydrolysis and fermentation (SHF) conditions. For enzymatic saccharification of cellulose, the cellulase and ??-glucanase cocktail significantly increased ethanol production compared to the ethanol production of fermented acid pretreated energy cane without enzymatic saccharification. The results revealed that energy cane variety L 79-1002 produced maximum cellulosic ethanol under SHF (6995 mg/L) and produced 3624 mg/L ethanol from fermentation of hemicellulosic sugars.     

Simultaneous saccharification and fermentation of lime-treated biomass

Simultaneous saccharification and fermentation (SSF) was performed on lime-treated switchgrass and corn stover, and oxidatively lime-treated poplar wood to determine their compatibility with Saccharomyces cerevisiae. Cellulose-derived glucose was extensively utilized by the yeast during SSF. The ethanol yields from pretreated switchgrass, pretreated corn stover, and pretreated-and-washed poplar wood were 72%, 62% and 73% of theoretical, respectively, whereas those from -cellulose were 67 to 91% of theoretical. The lower ethanol yields from treated biomass resulted from lower cellulose digestibilities rather than inhibitors produced by the pretreatment. Oxidative lime pretreatment of poplar wood increased the ethanol yield by a factor of 5.6, from 13% (untreated) to 73% (pretreated-and-washed).     

Optimization of Ethanol Production From Microfluidized Wheat Straw by Response Surface Methodology

In this study, wheat straw was pretreated with a microfluidizer to improve its enzymatic hydrolysis and ethanol yields. The pretreatment was performed at various pressures (500, 1000, and 1500 bar) and solid loadings (1, 2, and 3%). The microfluidized biomass was then subjected to hydrolysis and simultaneous saccharification and co-fermentation (SSCF) experiments at different enzyme loadings (5, 10, and 15 FPU/g dry wheat straw) using a mutant yeast. The results indicated that the microfluidization method alters the structure of biomass and leads to a reduction in lignin content. The samples pretreated at 1% solid loading contained the minimum lignin concentration and provided the maximum sugar and ethanol yields. These results signified that the microfluidization method is more effective on biomass at low solid loadings. The process conditions were optimized for higher ethanol and sugar yields using response surface methodology (RSM). The optimum pressure and solid and enzyme loadings were found as 1500 bar, 1%, and 15 FPU/g dry wheat straw, respectively. The yields obtained at this condition were 82%, 94%, and 65% for glucose, xylose, and ethanol, respectively. High sugar yields implied that microfluidization is an effective pretreatment method for cellulosic ethanol production. On the other hand, low ethanol yield may indicate that the microorganism was sensitive to inhibitory compounds present in the fermentation medium.     

Produced by a Strain of Unidentified Actinomycetes sp.

The possibility of using two kinds of sorghum as raw materials in consolidated bioprocessing bioethanol production using Flammulina velutipes was investigated. Enzymatic saccharification of sweet sorghum was not as high as in brown mid-rib (bmr) mutated sorghum, but the amount of ethanol production was higher. Ethanol production from bmr mutated sorghum significantly increased when saccharification enzymes were added to the culture.