Effect of static magnetic field on electricity production and wastewater treatment in microbial fuel cells

The effect of a magnetic field (MF) on electricity production and wastewater treatment in two-chamber microbial fuel cells (MFCs) has been investigated. Electricity production capacity could be improved by the application of a low-intensity static MF. When a MF of 50 mT was applied to MFCs, the maximum voltage, total phosphorus (TP) removal efficiency, and chemical oxygen demand (COD) removal efficiency increased from 523?±?2 to 553?±?2 mV, ～93 to ～96 %, and ～80 to >90 %, respectively, while the start-up time and coulombic efficiency decreased from 16 to 10 days and ～50 to ～43 %, respectively. The MF effects were immediate, reversible, and not long lasting, and negative effects on electricity generation and COD removal seemed to occur after the MF was removed. The start-up and voltage output were less affected by the MF direction. Nitrogen compounds in magnetic MFCs were nitrified more thoroughly; furthermore, a higher proportion of electrochemically inactive microorganisms were found in magnetic systems. TP was effectively removed by the co-effects of microbe absorption and chemical precipitation. Chemical precipitates were analyzed by a scanning electron microscope capable of energy-dispersive spectroscopy (SEM-EDS) to be a mixture of phosphate, carbonate, and hydroxyl compounds.     

光合细菌在微生物燃料电池中的应用研究进展

微生物燃料电池(Microbial fuel cells,MFCs)降解污染物的同时产生电能,受到广泛关注。光合细菌在MFCs领域的应用实现了污水处理、CO2捕捉、光电转换等多重功能,并显示出了良好的产电特性。本文根据光合细菌在MFCs中所起作用的不同对其产电机理进行评述,并在此基础上分析了光照对光合细菌型MFCs产电性能的影响;针对当前研究的不足与面临的问题,提出了今后光合细菌在MFCs领域的应用前景与发展方向。     

Layer-by-layer construction of graphene-based microbial fuel cell for improved power generation and methyl orange removal

Development of highly efficient anode is critical for enhancing the power output of microbial fuel cells (MFCs). The aim of this work is to investigate whether modification of carbon paper (CP) anode with graphene (GR) via layer-by-layer assembly technique is an effective approach to promote the electricity generation and methyl orange removal in MFCs. Using cyclic voltammetry and electrochemical impedance spectroscopy, the GR/CP electrode exhibited better electrochemical behavior. Scanning electron microscopy results revealed that the surface roughness of GR/CP increased, which was favorable for more bacteria to attach to the anode surface. The MFCs equipped with GR/CP anode achieved a stable maximum power density of 368 mW m^?2 under 1,000 Ω external resistance and a start time for the initial maximum voltage of 180 h, which were, respectively, 51 % higher and 31 % shorter than the corresponding values of the MFCs with blank anode. The anode and cathode polarization curves revealed negligible difference in cathode potentials but obviously difference in anode potentials, indicating that the GR-modified anode other than the cathode was responsible for the performance improvement of MFC. Meanwhile, compared with MFCs with blank anode, 11 % higher decolorization efficiency and 16 % higher the chemical oxygen demand removal rate were achieved in MFC with GR-modified anode during electricity generation. This study might provide an effective way to modify the anode for enhanced electricity generation and efficient removal of azo dye in MFCs.     

Use of Pseudomonas species producing phenazine-based metabolites in the anodes of microbial fuel cells to improve electricity generation

The rate of anodic electron transfer is one of the factors limiting the performance of microbial fuel cells (MFCs). It is known that phenazine-based metabolites produced by Pseudomonas species can function as electron shuttles for Pseudomonas themselves and also, in a syntrophic association, for Gram-positive bacteria. In this study, we have investigated whether phenazine-based metabolites and their producers could be used to improve the electricity generation of a MFC operated with a mixed culture. Both anodic supernatants obtained from MFCs operated with a Pseudomonas strain (P-PCA) producing phenazine-1-carboxylic acid (PCA) and those from MFCs operated with a strain (P-PCN) producing phenazine-1-carboxamide (PCN) exerted similarly positive effects on the electricity generation of a mixed culture. Replacing supernatants of MFCs operated with a mixed culture with supernatants of MFCs operated with P-PCN could double the currents generated. Purified PCA and purified PCN had similar effects. If the supernatant of an engineered strain overproducing PCN was used, the effect could be maintained over longer time courses, resulting in a 1.5-fold increase in the production of charge. Bioaugmentation of the mixed culture MFCs using slow release tubes containing P-PCN not only doubled the currents but also maintained the effect over longer periods. The results demonstrated the electron-shuttling effect of phenazine-based compounds produced by Pseudomonas species and their capacity to improve the performance of MFCs operated with mixed cultures. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Electricity generation from carbon monoxide and syngas in a microbial fuel cell

Electricity generation in microbial fuel cells (MFCs) has been a subject of significant research efforts. MFCs employ the ability of electricigenic bacteria to oxidize organic substrates using an electrode as an electron acceptor. While MFC application for electricity production from a variety of organic sources has been demonstrated, very little research on electricity production from carbon monoxide and synthesis gas (syngas) in an MFC has been reported. Although most of the syngas today is produced from non-renewable sources, syngas production from renewable biomass or poorly degradable organic matter makes energy generation from syngas a sustainable process, which combines energy production with the reprocessing of solid wastes. An MFC-based process of syngas conversion to electricity might offer a number of advantages such as high Coulombic efficiency and biocatalytic activity in the presence of carbon monoxide and sulfur components. This paper presents a discussion on microorganisms and reactor designs that can be used for operating an MFC on syngas.     

Enhancement of extracellular electron transfer and bioelectricity output by synthetic porin

The microbial fuel cell (MFC), is a promising environmental biotechnology for harvesting electricity energy from organic wastes. However, low bacterial membrane permeability of electron shuttles is a limiting factor that restricts the electron shuttle‐mediated extracellular electron transfer (EET) from bacteria to electrodes, thus the electricity power output of MFCs. To this end, we heterologously expressed a porin protein OprF from Pseudomonas aeruginosa PAO1 into Escherichia coli, which dramatically increased its membrane permeability, delivering a much higher current output in MFCs than its parental strain (BL21). We found that the oprF‐expression strain showed more efficient EET than its parental strain. More strikingly, the enhanced membrane permeability also rendered the oprF‐expression strain an efficient usage of riboflavin as the electron shuttle, whereas its parental strain was incapable of. Our results substantiated that membrane permeability is crucial for the efficient EET, and indicated that the expression of synthetic porins could be an efficient strategy to enhance bioelectricity generation by microorganisms (including electrogenic bacteria) in MFCs. Biotechnol. Bioeng. 2013; 110: 408–416. © 2012 Wiley Periodicals, Inc.     

Increased power generation from primary sludge in microbial fuel cells coupled with prefermentation

Raw primary sludge and the prefermentation liquor (PL) of primary sludge were used to generate electricity in single-chambered air-cathode microbial fuel cells (MFCs). The MFCs treating the primary sludge produced 0.53 V and 370 mW/m² for the maximum potential and power density, respectively. In the primary sludge-fed MFCs, only 5 % of the total energy production was produced from direct electricity generation, whereas 95 % of that resulted from the conversion of methane to electricity. MFCs treating the PL generated the maximum potential of 0.58 V and maximum power density of 885 mW/m², respectively. In the energy production analysis, direct electricity production (1,921 Wh/kg TCOD_rem) in the MFCs treating the PL was much higher than that of the primary sludge-fed MFC (138 Wh/kg TCOD_rem). Volatile suspended solids during 10 days were reduced to 18.3 and 38 % in the primary sludge-fed MFCs and prefermentation reactor, respectively. These findings suggest that a two-stage process including prefermentation and MFCs is of great benefit on sludge reduction and higher electricity generation from primary sludge.     

The significance of the initiation process parameters and reactor design for maximizing the efficiency of microbial fuel cells

Microbial fuel cells (MFCs) can be used for electricity generation via bioconversion of wastewater and organic waste substrates. MFCs also hold potential for production of certain chemicals, such as H₂ and H₂O₂. The studies of electricity generation in MFCs have mainly focused on the microbial community formation, substrate effect on the anode reaction, and the cathode’s catalytic properties. To improve the performance of MFCs, the initiation process requires more investigation because of its significant effect on the anodic biofilm formation. This review explores the factors which affect the initiation process, including inoculum, substrate, and reactor configuration. The key messages are that optimal performance of MFCs for electricity production requires (1) understanding of the electrogenic bacterial biofilm formation, (2) proper substrates at the initiation stage, (3) focus on operational conditions affecting initial biofilm formation, and (4) attention to the reactor configuration.     

Degradation of pentachlorophenol with the presence of fermentable and non-fermentable co-substrates in a microbial fuel cell

Pentachlorophenol (PCP) was more rapidly degraded in acetate and glucose-fed microbial fuel cells (MFCs) than in open circuit controls, with removal rates of 0.12 ± 0.01 mg/Lh (14.8 ± 1.0 mg/g-VSS-h) in acetate-fed, and 0.08 ± 0.01 mg/L h (6.9 ± 0.8 mg/g-VSS-h) in glucose-fed MFCs, at an initial PCP concentration of 15 mg/L. A PCP of 15 mg/L had no effect on power generation from acetate but power production was decreased with glucose. Coulombic balances indicate the predominant product was electricity (16.1 ± 0.3%) in PCP-acetate MFCs, and lactate (19.8 ± 3.3%) in PCP-glucose MFCs. Current generation accelerated the removal of PCP and co-substrates, as well as the degradation products in both PCP-acetate and PCP-glucose reactors. While 2,3,4,5-tetrachlorophenol was present in both reactors, tetrachlorohydroquinone was only found in PCP-acetate MFCs. These results demonstrate PCP degradation and power production were affected by current generation and the type of electron donor provided.     

The role of riboflavin in decolourisation of Congo red and bioelectricity production using <Emphasis Type="Italic">Shewanella oneidensis</Emphasis>-MR1 under MFC and non-MFC conditions

Dissimilatory metal reducing bacteria can exchange electrons extracellularly and hold great promise for their use in simultaneous wastewater treatment and electricity production. This study investigated the role of riboflavin, an electron carrier, in the decolourisation of Congo red in microbial fuel cells (MFCs) using Shewanella oneidensis MR-1 as a model organism. The contribution of the membrane-bound protein MtrC to the decolourisation process was also investigated. Within the range of riboflavin concentrations tested, 20 µM was found to be the best with >95% of the dye (initial concentration 200 mg/L) decolourised in MFCs within 50 h compared to 90% in the case where no riboflavin was added. The corresponding maximum power density was 45 mW/m². There was no significant difference in the overall decolourisation efficiencies of Shewanela oneidensis MR-1 ΔMtrC mutants compared to the wild type. However, in terms of power production the mutant produced more power (P_max 76 mW/m²) compared to the wild type (P_max 46 mW/m²) which was attributed to higher levels of riboflavin secreted in solution. Decolourisation efficiencies in non-MFC systems (anaerobic bottles) were similar to those under MFC systems indicating that electricity generation in MFCs does not impair dye decolourisation efficiencies. The results suggest that riboflavin enhances both decolourisation of dyes and simultaneous electricity production in MFCs.     

纳米材料修饰微生物燃料电池阳极的研究进展

阳极作为微生物燃料电池中的重要组成部分,其性能的高低显著影响着微生物燃料电池的产电性能。纳米材料具有导电性好、表面积大等优良特性。因此,纳米材料修饰阳极能够有效减小电极内阻、增大微生物的粘附量,从而显著提高微生物燃料电池的产电性能。本文首先简要介绍了微生物燃料电池中阳极修饰纳米材料的种类,然后重点归纳了不同纳米材料修饰阳极对微生物燃料电池产电性能的影响及其原因。最后对微生物燃料电池阳极修饰纳米材料和技术进行展望。     

Effect of enrichment procedures on performance and microbial diversity of microbial fuel cell for Congo red decolorization and electricity generation

The purpose of this study was to determine the effect of enrichment procedure on the performance and microbial diversity of an air-cathode microbial fuel cell (MFC) which was explored for simultaneous azo dye decolorization and electricity generation. Two different enrichment procedures in which glucose and Congo red were added into the MFCs sequentially (EP1) or simultaneously (EP2) were tested by operating parallel MFCs independently for more than 6 months. The power density, electrode potential, Congo red decolorization, biofilm morphology, and bacterial diversity of the MFCs under the two enrichment procedures were compared and investigated. The results showed that the enrichment procedures have a negligible effect on the dye decolorization, but significantly affected the electricity generation. More than 90% decolorization at dye concentration of 300 mg/L was achieved within 170 h for the two tested enrichment procedures. However, the MFC with EP2 achieved a maximum power density of 192 mW/m², which was 75% higher than that of the MFC with EP1 (110 mW/m²). The depressed surfaces of the bacteria in the MFC with EP1 indicated the allergic response caused by the subsequent addition of Congo red. 16S rRNA sequencing analysis demonstrated a phylogenetic diversity in the communities of the anode biofilm and showed clear differences between the anode-attached populations in the MFCs with a different enrichment procedure. This study suggests that the enrichment procedure is important for the MFC explored for simultaneous dye decolorization and electricity generation.     

Electricity generation from mixed volatile fatty acids using microbial fuel cells

Fermentative hydrogen production, as a process for clean energy recovery from organic wastewater, is limited by its low hydrogen yield due to incomplete conversion of substrates, with most of the fermentation products being volatile fatty acids (VFAs). Thus, further recovery of the energy from VFAs is expected. In this work, microbial fuel cell (MFC) was applied to recover energy in the form of electricity from mixed VFAs of acetate, propionate, and butyrate. Response surface methodology was adopted to investigate the relative contribution and possible interactions of the three components of VFAs. A stable electricity generation was demonstrated in MFCs after the enrichment of electrochemically active bacteria. Analysis showed that power density was more sensitive to the composition of mixed VFAs than coulombic efficiency. The electricity generation could mainly be attributed to the portion of acetate and propionate. However, the two components showed an antagonistic effect when propionate exceeded 19%, causing a decrease in coulombic efficiency. Butyrate was found to exert a negative impact on both power density and coulombic efficiency. Denaturing gradient gel electrophoresis profiles revealed the enrichment of electrochemically active bacteria from the inoculum sludge. Proteobacteria (Beta-, Delta-) and Bacteroidetes were predominant in all VFA-fed MFCs. Shifts in bacterial community structures were observed when different compositions of VFA mixtures were used as the electron donor. The overall electron recovery efficiency may be increased from 15.7% to 27.4% if fermentative hydrogen production and MFC processes are integrated.     

Thionine increases electricity generation from microbial fuel cell using Saccharomyces cerevisiae and exoelectrogenic mixed culture

Microbial fuel cells (MFCs) have been shown to be capable of clean energy production through the oxidation of biodegradable organic waste using various bacterial species as biocatalysts. In this study we found Saccharomyces cerevisiae, previously known electrochemcially inactive or less active species, can be acclimated with an electron mediator thionine for electrogenic biofilm formation in MFC, and electricity production is improved with facilitation of electron transfer. Power generation of MFC was also significantly increased by thionine with both aerated and non-aerated cathode. With electrochemically active biofilm enriched with swine wastewater, MFC power increased more significantly by addition of thionine. The optimum mediator concentration was 500 mM of thionine with S. cerevisae in MFC with the maximum voltage and current generation in the microbial fuel cell were 420 mV and 700 mA/m(2), respectively. Cyclic voltametry shows that thionine improves oxidizing and reducing capability in both pure culture and acclimated biofilm as compared to non-mediated cell. The results obtained indicated that thionine has great potential to enhance power generation from unmediated yeast or electrochemically active biofilm in MFC.     

Electrochemical analysis of Clostridium propionicum and its acrylic acid production in microbial fuel cells

Currently, acrylic acid is produced at a low yield by the resting cells of Clostridium propionicum with the supplement of extra electron acceptors. As an alternative way, acrylic acid production coupled with electricity generation was achieved by C. propionicum‐based microbial fuel cells (MFCs). Electricity was generated in the salt‐bridge MFCs with cysteine and resazurin in the anode chamber as mediators, and K₃Fe(CN)₆ as the cathode electron acceptor. Power generation was 21.78 mW/m² with an internal resistance of 9809 Ω. Cyclic voltammograms indicated the main mechanism of power production was the electron transfer facilitated by mediators in the system. In the salt‐bridge MFC system, 0.694 mM acrylic acid was produced together with electricity generation.     

Glycerol-fed microbial fuel cell with a co-culture of <Emphasis Type="Italic">Shewanella oneidensis</Emphasis> MR-1 and <Emphasis Type="Italic">Klebsiella pneumonae</Emphasis> J2B

Glycerol is an attractive feedstock for bioenergy and bioconversion processes but its use in microbial fuel cells (MFCs) for electrical energy recovery has not been investigated extensively. This study compared the glycerol uptake and electricity generation of a co-culture of Shewanella oneidensis MR-1 and Klebsiella pneumonia J2B in a MFC with that of a single species inoculated counterpart. Glycerol was metabolized successfully in the co-culture MFC (MFC-J&M) with simultaneous electricity production but it was not utilized in the MR-1 only MFC (MFC-M). A current density of 10 mA/m² was obtained while acidic byproducts (lactate and acetate) were consumed in the co-culture MFC, whereas they are accumulated in the J2B-only MFC (MFC-J). MR-1 was distributed mainly on the electrode in MFC-J&M, whereas most of the J2B was observed in the suspension in the MFC-J reactor, indicating that the co-culture of both strains provides an ecological driving force for glycerol utilization using the electrode as an electron acceptor. This suggests that a co-culture MFC can be applied to electrical energy recovery from glycerol, which was previously known as a refractory substrate in a bioelectrochemical system.     

Metabolic modeling of spatial heterogeneity of biofilms in microbial fuel cells reveals substrate limitations in electrical current generation

Microbial fuel cells (MFCs) have been proposed as an alternative energy resource for the conversion of organic compounds to electricity. In an MFC, microorganisms such as Geobacter sulfurreducens form an anode‐associated biofilm that can completely oxidize organic matter (electron donor) to carbon dioxide with direct electron transfer to the anode (electron acceptor). Mathematical models are useful in analyzing biofilm processes; however, existing models rely on Nernst–Monod type expressions, and evaluate extracellular processes separated from the intracellular metabolism of the microorganism. Thus, models that combine both extracellular and intracellular components, while addressing spatial heterogeneity, are essential for improved representation of biofilm processes. The goal of this work is to develop a model that integrates genome‐scale metabolic models with the model of biofilm environment. This integrated model shows the variations of electrical current production and biofilm thickness under the presence/absence of NH₄ in the bulk solution, and under varying maintenance energy demands. Further, sensitivity analysis suggested that conductivity is not limiting electrical current generation and that increasing cell density can lead to enhanced current generation. In addition, the modeling results also highlight instances such as the transformation into respiring cells, where the mechanism of electrical current generation during biofilm development is not yet clearly understood.     

微生物燃料电池在毒性物质检测中的应用

微生物燃料电池(Microbial fuel cell,MFC)利用微生物整体作为催化剂催化底物将化学能直接转化为电能,是一种极具应用前景的生物电化学技术。微生物在阳极氧化还原有机物产生电子并传递给阳极,电子通过外电路传递至阴极后将电子释放给阴极中的氧化剂,从而产生电流。当有毒物质进入MFC,微生物活性降低,电子传递量变少,电流降低,而电流的产生与微生物活性呈线性关系,据此可检测样品的毒性。本文主要介绍了微生物燃料电池在毒性物质抗生素、重金属离子、有机污染物、酸等方面的研究,并分析了微生物燃料电池存在的问题及未来研究方向,以期不久的将来微生物燃料电池能付之使用。     

The direct electrocatalysis of phenazine-1-carboxylic acid excreted by Pseudomonas alcaliphila under alkaline condition in microbial fuel cells

In this paper, we reported a kind of exoelectrogens, Pseudomonas alcaliphila (P. alcaliphila) strain MBR, which could excrete phenazine-1-carboxylic acid (PCA) to transfer electron under alkaline condition in microbial fuel cells (MFCs). The electrochemical activity of strain MBR and the extracellular electron transfer mechanism in MFCs were evaluated by cyclic voltammetry (CV) and electricity generation curve measurement. The results indicated a soluble mediator was the key factor for extracellular electron transfer of strain MBR under alkaline condition. The soluble mediator was PCA detected by gas chromatography-mass (GC-MS) analyses.     

Enhancement of coulombic efficiency and salt tolerance in microbial fuel cells by graphite/alginate granules immobilization of Shewanella oneidensis MR-1

Coulombic efficiency and stability of electricity output are crucial for practical applications of microbial fuel cells (MFCs). In this study, a cell immobilization method for electrogenic microorganism in MFCs using graphite/alginate granules is developed. The MFC with immobilized cell granules delivered a much more stable electricity output than that with suspension cells, and resulted in a ～0.8 to 1.7 times improvement on coulombic efficiency compared to the suspension mode. Impressively, with the conductive graphite/alginate/cells granules, the internal resistance of the MFC decreased dramatically. Moreover, the cell immobilized MFC showed a much higher tolerance to the shock of high salt concentration than the MFC with suspension cells. The results substantiated that immobilization of electrogenic microorganism for MFCs could be achieved by the method developed here, and it is promising for practical application in energy harvesting from wastewater by MFCs.