Low Loss Plasmonic Bragg Gratings with a Trench Plasmonic Waveguide

Plasmonics - We designed plasmonic Bragg gratings based on a plasmonic trench waveguide and calculated the characteristics of the designed structure. Conventional plasmonic Bragg gratings are...     

Tunable Ultrahigh Order Surface Plasmonic Resonance in Multi-Ring Plasmonic Nanocavities

Optical properties of multi-ring with spatial symmetry breaking are investigated theoretically. Tunable ultrahigh order surface plasmonic resonance is achieved, which is found to be sensitive to geometric parameters. Certain high-order surface plasmonic resonances can be either suppressed or enhanced when geometrical parameters are adjusted. Moreover, more than one quadrupolar-dipolar, octupolar-dipolar, and hexadecapolar-dipolar mode of the surface plasmonic resonance can be achieved. The asymmetry also allows the generation of strong electric field enhancement with these nanostructures that can be applied in the field of surface-enhanced spectroscopy and biosensing.     

Nonlocal Plasmonic Modes and Plasmonic Band Structures in Cylindrically Curved Graphene

Plasmonics - In this paper, hydrodynamic model has been analytically solved to investigate the nonlocal plasmons in cylindrically curved graphene layers. Within the quasi-static approximation, the...     

Reconfigurable Plasmonic Logic Gates

Reconfigurable one-, two-, and three-bit plasmonic logic gate configurations have been proposed, which work by covering a straight slot waveguide with materials with tunable dielectric constants, such as graphene. By encoding the logic states in the values of dielectric constants as opposed to different waveguides, the plasmon excitation problems are minimized and the simplified logic gate configurations could be easily implemented.

     

Investigation of the Plasmonic Interaction of Gold Nanoparticles Toward Plasmonic Photothermal Therapeutics

Plasmonic interaction of nanoparticles located in close proximity, embedded in breast tissue, is simulated for estimating the optical characteristics like optical absorption cross-section, plasmonic wavelength as well as full-width half maxima (FWHM). The computations are done for the monomers, homodimers, and heterodimers of spherical and rod-shaped gold nanoparticles considering various interparticle spacings for gold nanospheres and the interparticle spacing as well as the orientation for gold nanorods (GNRs). The results indicate that for the spherical dimer, with the change in interparticle spacing from 1 to 20 nm, the peak absorption cross-section decreases by 43%. Whereas for the GNRs, the absorption cross-section increases/decreases, within 9–18%, depending on the homodimer or heterodimer configuration. Furthermore, secondary peaks for the absorption cross-section are obtained within wavelengths of 630–940 nm due to antibonding modes for GNR heterodimers. For GNR heterodimer located end-to-end, this secondary peak for the absorption cross-section appears at 780 nm irrespective of interparticle spacing within 1–5 nm. The absorption coefficient is considerably dependent on the configuration and proximity of GNRs located within the tissue. While FWHM is not significantly influenced by GNRs configuration and interparticle spacing. For interparticle spacing from 1 to 20 nm, the plasmonic wavelength shifts by 38 nm for the spherical dimer and by 35–86 nm for various GNR dimers. The findings of this study are useful for plasmonic photothermal therapeutics as the heat generation is governed by the resulting absorption cross-section due to plasmonic coupling of the closely spaced and different orientations of the nanoparticles.

     

Ascertaining Plasmonic Hot Electrons Generation from Plasmon Decay in Hybrid Plasmonic Modes

Plasmonics - In the propagating process along metal surface, surface plasmon polaritons (SPPs) mainly decay into thermal loss or release into photons, while a part of them were converted into...     

Ring-Shaped Plasmonic Logic Gates

Ring-shaped one-, two-, and three-bit plasmonic logic gate configurations and circuits have been proposed, which, besides being compact, are also versatile and can be easily cascaded, the output logic values being controlled by both the geometry of the multi-port rings and the phase of the incident beams. This latter degree of freedom, not fully exploited up to now in plasmonic circuits, offers a high degree of flexibility of logic gate configurations.

     

Plasmonic Focusing in Nanostructures

In this review, we show that by designing the metallic nanostructures, the surface plasmon (SP) focusing has been achieved, with the focusing spot at a subwavelength scale. The central idea is based on the principle of optical interference that the constructive superposition of SPs with phase matching can result in a considerable electric-field enhancement of SPs in the near field, exhibiting a pronounced focusing spot. We first reviewed several new designs for surface plasmon focusing by controlling the metallic geometry or incident light polarization: We made an in-plane plasmonic Fresnel zone plates, a counterpart in optics, which produces an obvious SP focusing effect; We also fabricated the symmetry broken nanocorrals which can provide the spatial phase difference for SPs, and then we propose another plasmon focusing approach by using semicircular nanoslits, which gives rise to the phase difference through changing refractive index of the medium in the nanoslits. Further, we showed that the spiral metallic nanostructure can be severed as plasmonic lens to control the plasmon focusing under a linearly polarized light with different angles.

     

Self-Referencing Plasmonic Array Sensors

A self-referencing plasmonic platform is proposed and analyzed. By introducing a thin gold layer below a periodic two-dimensional nano-grating, the structure supports multiple modes including localized surface plasmon resonance (LSPR), surface plasmon resonance (SPR), and Fabry-Perot resonances. These modes get coupled to each other creating multiple Fano resonances. A coupled mode between the LSPR and SPR responses is spatially separated from the sensor surface and is not sensitive to refractive index changes in the surrounding materials or surface attachments. This mode can be used for self-referencing the measurements. In contrast, the LSPR dominant mode shifts in wavelength when the refractive index of the surrounding medium is changed. The proposed structure is easy to fabricate using conventional lithography and electron beam deposition methods. A bulk sensitivity of 429 nm/RIU is achieved. The sensor also has the ability to detect nanometer thick surface attachments on the top of the grating.

     

Plasmonic Enhanced Optoelectronic Devices

Plasmonic metal nanostructures have recently attracted extensive research and developed into a promise approach for enhancing the performance of various optoelectronic devices. This brief article reviews recent research advances on the plasmonic enhanced optoelectronic devices and highlights a variety of strategies of incorporating plasmonic nanostructures into different optoelectronics such as solar cells, light-emitting diode, and multicolor photodetector, etc. In addition, the benefits of using various plasmonic metal nanostructures are discussed and the resulting enhancement mechanisms are displayed and summarized.     

Au Plasmonic Shofar Structures

Plasmonics - We demonstrate a simple two-step etching method to fabricate Au plasmonic shofars (“shofar” is the Hebrew name for certain types of curved and tapered horns, such as from a...     

A Hybrid Plasmonic Modulator Based on Graphene on Channel Plasmonic Polariton Waveguide

A hybrid plasmonic modulator based on graphene on channel plasmonic polariton waveguide was proposed to overcome the difficulty in achieving high-speed modulation on the nanometric plasmonic waveguide platform. The extinction ratio and the figure of merit of the proposed modulator were analyzed in detail, and a tradeoff between them was found due to the intrinsic loss of the channel plasmonic polariton waveguide. And an optimized hybrid plasmonic modulator with large modulation bandwidth of 0.662 THz, low power consumption of 118.7 fJ/bit, and short device length of 7.680 μm was obtained theoretically. In addition, the proposed hybrid plasmonic modulator based on graphene on channel plasmonic polariton waveguide is easy to fabricate and provides a potential solution for the high-speed plasmonic modulator.

     

Highest Efficiency Plasmonic Polycrystalline Silicon Thin-Film Solar Cells by Optimization of Plasmonic Nanoparticle Fabrication

Excitation of surface plasmons in metallic nanoparticles is a promising method for increasing the light absorption in solar cells and hence the cell photocurrent. Comprehensive optimization of a nanoparticle fabrication process for enhanced performance of polycrystalline silicon thin-film solar cells is presented. Three factors were studied: the Ag precursor film thickness, annealing temperature and time. The thickness of the precursor film was 10, 14 and 20 nm; annealing temperature was 190, 200, 230 and 260 °C; and annealing time was varied between 20 and 95 min. Performance enhancement due to light-scattering by nanoparticles was calculated by comparing absorption, short-circuit current density and energy conversion efficiency in solar cells with and without nanoparticles formed under different process conditions. Nanoparticles formed from 14-nm-thick Ag precursor film annealed at 230 °C for 53 min result in the highest absorption enhancement in the 700–1,100 nm wavelength range, in the highest enhancement of total short-circuit current density. The highest photocurrent enhancement was 33.5 %, which was achieved by the cell with the highest absorption enhancement in the 700–1,100 nm range. The plasmonic cell efficiency of 5.32 % was achieved without a back reflector and 5.95 % with the back reflector; which is the highest reported efficiency for plasmonic thin-film solar cells.     

Polarization-Controlled Tunable Multi-focal Plasmonic Lens

A polarization-controlled tunable plasmonic lens which can generate different multi-focal combinations with exciting sources of left and right circular polarizations is proposed in this paper. Both position and intensity of each focal point can be adjusted by modulating the structure of the plasmonic lens. It is believed that the polarization-controlled tunable plasmonic multi-focal lens can be potentially used for optical switches and multi-channel couplers in future logic photonic and plasmonic systems.     

Coherence Converting Plasmonic Hole Arrays

Simulations are presented that demonstrate that the global state of spatial coherence of an optical wavefield can be altered on transmission through an array of subwavelength-sized holes in a metal plate that supports surface plasmons. It is found that the state of coherence of the emergent field strongly depends on the separation between the holes and their scattering strength. Our findings suggest that subwavelength hole arrays on a metal film can be potentially employed as a plasmon-assisted coherence converting device, useful in modifying the directionality, spectrum, and polarization of the transmitted wave.     

Plasmonic Nanolithography: A Review

Surface plasmon polaritons (SPPs) has attracted great attention in the last decade and recently it has been successfully applied to nanolithography due to its ability of beyond diffraction limit. This article reviews the recent development in plasmonic nanolithography, which is considered as one of the most remarkable technology for next-generation nanolithography. Nanolithography experiments were highlighted on the basis of SPPs effect. Three types of plasmonic nanolithography methods: contact nanolithography, planar lens imaging nanolithography, and direct writing nanolithography were reviewed in detail, and their advantages and shortages are analyzed and compared, respectively. Finally, the development trend of plasmonic nanolithography is suggested.     

A Plasmonic Wavelength-Selected Intersection Structure

A subwavelength intersection structure with wavelength filtering functionality is proposed by using an open loop which consists of four slot cavities and four metal-insulator-metal (MIM) drop waveguides. The slot cavities are used as the resonators while the MIM waveguides serve as the input/output ports. The SPPs propagations and the transmission wavelengths in two pairs of matched input/output ports are immune to each other, which satisfy the intersection characters. The results based on finite difference time domain (FDTD) method demonstrate that high transmittance for the expected output port and high isolation for other ports have been achieved. Specifically, the transmittance and isolation is larger than 0.64 and 14 dB, respectively. In addition, a transmission peak, whose wavelength can be modulated by adjusting the length of the slot cavities, is available for the output port. Such a device can find applications in various optical systems, such as the wavelength filtering area and the optical intersection area.     

Plasmonic Lenses: A Review

Four types of plasmonic lenses for the purpose of superfocusing designed on the bases of approximate negative refractive index concept, subwavelength metallic structures, waveguide mode were introduced, and curved chains of nanoparticles, respectively, were introduced. Imaging mechanism, fabrication, and characterization issues were presented. Theoretical analyses of the illumination with different polarization states on focusing performance of the plasmonic lenses were given also. In addition, a hybrid Au-Ag plasmonic lens with chirped slits for the purpose of avoiding oxidation of Ag film was presented.     

Optimization of Optoelectronic Plasmonic Structures

We discuss the interplay between surface plasmon polaritons (SPPs) and localized shape resonances (LSRs) in a plasmonic structure working as a photo-coupler for a GaAs quantum well photodetector. For a targeted electronic inter-subband transition inside the quantum well, maximum photon absorption is found by compromising two effects: the mode overlapping with incident light and the lifetime of the resonant photons. Under the optimal conditions, the LSR mediates the coupling between the incident light and plasmonic structure while the SPP provides long-lived resonance which is limited ultimately by metal loss. The present work provides insight to the design of plasmonic photo-couplers in semiconductor optoelectronic applications.