Emission analysis of Tb3+‐and Sm3+‐ion‐doped (Li2O/Na2O/K2O) and (Li2O + Na2O/Li2O + K2O/K2O + Na2O)‐modified borosilicate glasses

Four series of borosilicate glasses modified by alkali oxides and doped with Tb³⁺ and Sm³⁺ ions were prepared using the conventional melt quenching technique, with the chemical composition 74.5B₂O₃ + 10SiO₂ + 5MgO + R + 0.5(Tb₂O₃/Sm₂O₃) [where R = 10(Li₂O /Na₂O/K₂O) for series A and C, and R = 5(Li₂O + Na₂O/Li₂O + K₂O/K₂O + Na₂O) for series B and D]. The X‐ray diffraction (XRD) patterns of all the prepared glasses indicate their amorphous nature. The spectroscopic properties of the prepared glasses were studied by optical absorption analysis, photoluminescence excitation (PLE) and photoluminescence (PL) analysis. A green emission corresponding to the ⁵D₄ → ⁷F₅ (543 nm) transition of the Tb³⁺ ions was registered under excitation at 379 nm for series A and B glasses. The emission spectra of the Sm³⁺ ions with the series C and D glasses showed strong reddish‐orange emission at 600 nm (⁴G_5/2 →⁶H_7/2) with an excitation wavelength λ_exci = 404 nm (⁶H_5/2→⁴F_7/2). Furthermore, the change in the luminescence intensity with the addition of an alkali oxide and combinations of these alkali oxides to borosilicate glasses doped with Tb³⁺ and Sm³⁺ ions was studied to optimize the potential alkali‐oxide‐modified borosilicate glass.     

Design,synthesis and luminescence properties of Ba2YB2O6Cl‐ and Ba2YB2O6F‐based phosphors

Using a high‐temperature solid‐state reaction, the chlorine in Ba₂YB₂O₆Cl is gradually replaced by F, and a new compound with the nominal chemical formula Ba₂YB₂O₆F and two phosphors doped with Ce³⁺ and Eu³⁺, respectively, are obtained. X‐Ray diffraction and photoluminescence spectroscopy are used to characterize the as‐synthesized samples. The as‐synthesized Ba₂YB₂O₆Cl exhibits bright blue emission in the spectral range ~ 330–410 nm with a maximum around 363 nm under X‐ray or UV excitation. Ba₂YB₂O₆F:0.01Ce³⁺ exhibits blue emission in the range ~ 340–570 nm with a maximum around 383 nm. Ba₂YB₂O₆F:0.01Eu³⁺ exhibits a predominantly ⁵D₀–⁷ F₂ emission (~610 nm) and the relative intensities of the ⁵D₀–⁷ F_0,1,2 emissions are tunable under different wavelength UV excitation. The luminescence behaviors of the two phosphors are explained simply in terms of the host composition and site occupancy probability of Ce³⁺ and Eu³⁺, respectively. The results indicate that these phosphors have potential application as a blue phosphor or as a red phosphor. Copyright © 2014 John Wiley & Sons, Ltd.     

RATE OF O2 PRODUCTION DERIVED FROM PULSE‐AMPLITUDE‐MODULATED FLUORESCENCE: TESTING THREE BIOOPTICAL APPROACHES AGAINST MEASURED O2‐PRODUCTION RATE1

Light absorption by phytoplankton is both species specific and affected by photoacclimational status. To estimate oxygenic photosynthesis from pulse‐amplitude‐modulated (PAM) fluorescence, the amount of quanta absorbed by PSII needs to be quantified. We present here three different biooptical approaches to estimate the fraction of light absorbed by PSII: (1) the factor 0.5, which implies that absorbed light is equally distributed among PSI and PSII; (2) the fraction of chl a in PSII, determined as the ratio between the scaled red‐peak fluorescence excitation and the red absorption peak; and (3) the measure of light absorbed by PSII, determined from the scaling of the fluorescence excitation spectra to the absorption spectra by the “no‐overshoot” procedure. Three marine phytoplankton species were used as test organisms: Prorocentrum minimum (Pavill.) J. Schiller (Dinophyceae), Prymnesium parvum cf. patelliferum (J. C. Green, D. J. Hibberd et Pienaar) A. Larsen (Haptophyceae), and Phaeodactylum tricornutum Bohlin (Bacillariophyceae). Photosynthesis versus irradiance (P vs. E) parameters calculated using the three approaches were compared with P versus E parameters obtained from simultaneously measured rates of oxygen production. Generally, approach 1 underestimated, while approach 2 overestimated the gross O₂‐production rate calculated from PAM fluorescence. Approach 3, in principle the best approach to estimate quanta absorbed by PSII, was also superior according to observations. Hence, we recommend approach 3 for estimation of gross O₂‐production rates based on PAM fluorescence measurements.     

Nature‐Inspired Tri‐Pathway Design Enabling High‐Performance Flexible Li–O2 Batteries

Trees have an abundant network of channels for the multiphase transport of water, ions, and nutrients. Recent studies have revealed that multiphase transport of ions, oxygen (O₂) gas, and electrons also plays a fundamental role in lithium–oxygen (Li–O₂) batteries. The similarity in transport behavior of both systems is the inspiration for the development of Li–O₂ batteries from natural wood featuring noncompetitive and continuous individual pathways for ions, O₂, and electrons. Using a delignification treatment and a subsequent carbon nanotube/Ru nanoparticle coating process, one is able to convert a rigid and electrically insulating wood membrane into a flexible and electrically conductive material. The resulting cell walls are comprised of cellulose nanofibers with abundant nanopores, which are ideal for Li⁺ ion transport, whereas the unperturbed wood lumina act as a pathway for O₂ gas transport. The noncompetitive triple pathway design endows the wood‐based cathode with a low overpotential of 0.85 V at 100 mA g^?1, a record‐high areal capacity of 67.2 mAh cm^?2, a long cycling life of 220 cycles, and superior electrochemical and mechanical stability. The integration of such excellent electrochemical performance, outstanding mechanical flexibility, and renewable yet cost‐effective starting materials via a nature‐inspired design opens new opportunities for developing portable energy storage devices.     

Multi‐Scale Investigations of δ‐Ni0.25V2O5·nH2O Cathode Materials in Aqueous Zinc‐Ion Batteries

Cost‐effective and environment‐friendly aqueous zinc‐ion batteries (AZIBs) exhibit tremendous potential for application in grid‐scale energy storage systems but are limited by suitable cathode materials. Hydrated vanadium bronzes have gained significant attention for AZIBs and can be produced with a range of different pre‐intercalated ions, allowing their properties to be optimized. However, gaining a detailed understanding of the energy storage mechanisms within these cathode materials remains a great challenge due to their complex crystallographic frameworks, limiting rational design from the perspective of enhanced Zn²⁺ diffusion over multiple length scales. Herein, a new class of hydrated porous δ‐Ni_0.25V₂O₅.nH₂O nanoribbons for use as an AZIB cathode is reported. The cathode delivers reversibility showing 402 mAh g^?1 at 0.2 A g^?1 and a capacity retention of 98% over 1200 cycles at 5 A g^?1. A detailed investigation using experimental and computational approaches reveal that the host “δ” vanadate lattice has favorable Zn²⁺ diffusion properties, arising from the atomic‐level structure of the well‐defined lattice channels. Furthermore, the microstructure of the as‐prepared cathodes is examined using multi‐length scale X‐ray computed tomography for the first time in AZIBs and the effective diffusion coefficient is obtained by image‐based modeling, illustrating favorable porosity and satisfactory tortuosity.     

Trace analysis of N‐acetyl‐L‐cysteine using luminol–H2O2 chemiluminescence system catalyzed by silver nanoparticles

N‐Acetyl‐L‐cysteine (NAC) can inhibit the luminol–H₂O₂, reaction, which is catalyzed by silver nanoparticles. Based on this phenomenon a new method was developed for NAC determination. Under optimum conditions, a linear relationship between chemiluminescence intensity and NAC concentration was found in the range 0.034–0.98 µg/mL. The detection limit was 0.010 µg/mL (S/N =3), and the relative standard deviation (RSD) was <5% for 0.480 µg/mL NAC (n =5). This simple, sensitive and inexpensive method has been applied to measure the concentration of NAC in pharmaceutical tablets. Copyright © 2014 John Wiley & Sons, Ltd.     

Epigallocatechin‐3‐gallate induces mesothelioma cell death via H2O2−dependent T‐type Ca2+ channel opening

Malignant mesothelioma (MMe) is a highly aggressive, lethal tumour requiring the development of more effective therapies. The green tea polyphenol epigallocathechin‐3‐gallate (EGCG) inhibits the growth of many types of cancer cells. We found that EGCG is selectively cytotoxic to MMe cells with respect to normal mesothelial cells. MMe cell viability was inhibited by predominant induction of apoptosis at lower doses and necrosis at higher doses. EGCG elicited H₂O₂ release in cell cultures, and exogenous catalase (CAT) abrogated EGCG‐induced cytotoxicity, apoptosis and necrosis. Confocal imaging of fluo 3‐loaded, EGCG‐exposed MMe cells showed significant [Ca²⁺]_i rise, prevented by CAT, dithiothreitol or the T‐type Ca²⁺ channel blockers mibefradil and NiCl₂. Cell loading with dihydrorhodamine 123 revealed EGCG‐induced ROS production, prevented by CAT, mibefradil or the Ca²⁺ chelator BAPTA‐AM. Direct exposure of cells to H₂O₂ produced similar effects on Ca²⁺ and ROS, and these effects were prevented by the same inhibitors. Sensitivity of REN cells to EGCG was correlated with higher expression of Ca_v3.2 T‐type Ca²⁺ channels in these cells, compared to normal mesothelium. Also, Ca_v3.2 siRNA on MMe cells reduced in vitro EGCG cytotoxicity and abated apoptosis and necrosis. Intriguingly, Ca_v3.2 expression was observed in malignant pleural mesothelioma biopsies from patients, but not in normal pleura. In conclusion, data showed the expression of T‐type Ca²⁺ channels in MMe tissue and their role in EGCG selective cytotoxicity to MMe cells, suggesting the possible use of these channels as a novel MMe pharmacological target.     

Direct Growth of Flower‐Like δ‐MnO2 on Three‐Dimensional Graphene for High‐Performance Rechargeable Li‐O2 Batteries

A challenge still remains to develop high‐performance and cost‐effective air electrode for Li‐O₂ batteries with high capacity, enhanced rate capability and long cycle life (100 times or above) despite recent advances in this field. In this work, a new design of binder‐free air electrode composed of three‐dimensional (3D) graphene (G) and flower‐like δ‐MnO₂ (3D‐G‐MnO₂) has been proposed. In this design, graphene and δ‐MnO₂ grow directly on the skeleton of Ni foam that inherits the interconnected 3D scaffold of Ni foam. Li‐O₂ batteries with 3D‐G‐MnO₂ electrode can yield a high discharge capacity of 3660 mAh g^?1 at 0.083 mA cm^?2. The battery can sustain 132 cycles at a capacity of 492 mAh g^?1 (1000 mAh g_carbon ^?1) with low overpotentials under a high current density of 0.333 mA cm^?2. A high average energy density of 1350 Wh Kg^?1 is maintained over 110 cycles at this high current density. The excellent catalytic activity of 3D‐G‐MnO₂ makes it an attractive air electrode for high‐performance Li‐O₂ batteries.     

Li2O:Li–Mn–O Disordered Rock‐Salt Nanocomposites as Cathode Prelithiation Additives for High‐Energy Density Li‐Ion Batteries

The irreversible loss of lithium from the cathode material during the first cycles of rechargeable Li‐ion batteries notably reduces the overall cell capacity. Here, a new family of sacrificial cathode additives based on Li₂O:Li_2/3Mn_1/3O_5/6 composites synthesized by mechanochemical alloying is reported. These nanocomposites display record (but irreversible) capacities within the Li–Mn–O systems studied, of up to 1157 mAh g^?1, which represents an increase of over 300% of the originally reported capacity in Li_2/3Mn_1/3O_5/6 disordered rock salts. Such a high irreversible capacity is achieved by the reaction between Li₂O and Li_2/3Mn_1/3O_5/6 during the first charge, where electrochemically active Li₂O acts as a Li⁺ donor. A 13% increase of the LiFePO₄ and LiCoO₂ first charge gravimetric capacities is demonstrated by the addition of only 2 wt% of the nanosized composite in the cathode mixture. This result shows the great potential of these newly discovered sacrificial additives to counteract initial losses of Li⁺ ions and improve battery performance.     

A Self‐Doping,O2‐Stable,n‐Type Interfacial Layer for Organic Electronics

Solid films of a water‐soluble dicationic perylene diimide salt, perylene bis(2‐ethyltrimethylammonium hydroxide imide), Petma⁺OH^?, are strongly doped n‐type by dehydration and reversibly de‐doped by hydration. The hydrated films consist almost entirely of the neutral perylene diimide, PDI, while the dehydrated films contain ～50% PDI anions. The conductivity increases by five orders of magnitude upon dehydration, probably limited by film roughness, while the work function decreases by 0.74 V, consistent with an n‐type doping density increase of ～12 orders of magnitude. Remarkably, the PDI anions are stable in dry air up to 120 °C. The work function of the doped film, ? (3.96 V vs. vacuum), is unusually negative for an O₂‐stable contact. Petma⁺OH^? is also characterized as an interfacial layer, IFL, in two different types of organic photovoltaic cells. Results are comparable to state of the art cesium carbonate IFLs, but may improve if film morphology can be better controlled. The films are stable and reversible over many months in air and light. The mechanism of this unusual self‐doping process may involve the change in relative potentials of the ions in the film caused by their deshielding and compaction as water is removed, leading to charge transfer when dry.     

Spermidine oxidase‐derived H2O2 regulates pollen plasma membrane hyperpolarization‐activated Ca2+‐permeable channels and pollen tube growth

Spermidine (Spd) has been correlated with various physiological and developmental processes in plants, including pollen tube growth. In this work, we show that Spd induces an increase in the cytosolic Ca²⁺ concentration that accompanies pollen tube growth. Using the whole‐cell patch clamp and outside‐out single‐channel patch clamp configurations, we show that exogenous Spd induces a hyperpolarization‐activated Ca²⁺ current: the addition of Spd cannot induce the channel open probability increase in excised outside‐out patches, indicating that the effect of Spd in the induction of Ca²⁺ currents is exerted via a second messenger. This messenger is hydrogen peroxide (H₂O₂), and is generated during Spd oxidation, a reaction mediated by polyamine oxidase (PAO). These reactive oxygen species trigger the opening of the hyperpolarization‐activated Ca²⁺‐permeable channels in pollen. To provide further evidence that PAO is in fact responsible for the effect of Spd on the Ca²⁺‐permeable channels, two Arabidopsis mutants lacking expression of the peroxisomal‐encoding AtPAO3 gene, were isolated and characterized. Pollen from these mutants was unable to induce the opening of the Ca²⁺‐permeable channels in the presence of Spd, resulting in reduced pollen tube growth and seed number. However, a high Spd concentration triggers a Ca²⁺ influx beyond the optimal, which has a deleterious effect. These findings strongly suggest that the Spd‐derived H₂O₂ signals Ca²⁺ influx, thereby regulating pollen tube growth.     

High‐solids biphasic CO2–H2O pretreatment of lignocellulosic biomass

A high pressure (200 bar) CO₂–H₂O process was developed for pretreating lignocellulosic biomass at high‐solid contents, while minimizing chemical inputs. Hardwood was pretreated at 20 and 40 (wt.%) solids. Switchgrass, corn stover, big bluestem, and mixed perennial grasses (a co‐culture of big bluestem and switchgrass) were pretreated at 40 (wt.%) solids. Operating temperatures ranged from 150 to 250°C, and residence times from 20 s to 60 min. At these conditions a biphasic mixture of an H₂O‐rich liquid (hydrothermal) phase and a CO₂‐rich supercritical phase coexist. Following pretreatment, samples were then enzymatically hydrolyzed. Total yields, defined as the fraction of the theoretical maximum, were determined for glucose, hemicellulose sugars, and two degradation products: furfural and 5‐hydroxymethylfurfural. Response surfaces of yield as a function of temperature and residence time were compared for different moisture contents and biomass species. Pretreatment at 170°C for 60 min gave glucose yields of 77%, 73%, and 68% for 20 and 40 (wt.%) solids mixed hardwood and mixed perennial grasses, respectively. Pretreatment at 160°C for 60 min gave glucan to glucose yields of 81% for switchgrass and 85% for corn stover. Biotechnol. Bioeng. 2010;107: 451–460. © 2010 Wiley Periodicals, Inc.     

The structure and luminescence properties of Mn2+/Eu2+/Er3+‐doped MgO‐Ga2O3‐SiO2 glasses and glass‐ceramics

The MgO–Ga₂O₃–SiO₂ glasses and glass‐ceramics samples doped with Eu²⁺/Mn²⁺/Er³⁺ and heated in reductive atmosphere were prepared by the sol–gel method. The structure, morphology and the luminescence properties were studied using X‐ray diffraction, high‐resolution transmission electron microscope, fluorescence spectra, and up‐conversion emission. The luminescence characteristics of doped ions could be influenced by temperature and matrix component. The characteristic emission of Mn²⁺, Eu²⁺ and Er³⁺ were seen and the energy transfer efficiency from Eu²⁺ to Mn²⁺ was enhanced as Mn²⁺ concentration was increased. In addition, the two‐photon process was determined for the Er³⁺‐doped samples.     

Structural and optical properties of europium‐ and titanium‐doped Y2O3 nanoparticles

Luminescent nanoparticles of Y₂O₃ doped with europium (Eu) and/or titanium (Ti) were synthesized using modified sol–gel routes. The crystalline cubic phase was confirmed using X‐ray powder diffraction (XRD). Particle morphology and size were evaluated using scanning and transmission electron microscopy. High‐resolution transmission electron microscopy showed that the synthesis method affected the average particle size and the Fourier transform of the images showed the lattice plane distances, indicating that the samples presented high crystallinity degree in accordance with the XRD pattern. The Ti valence was investigated using X‐ray absorption near edge spectroscopy and the tetravalent form was the dominant oxidizing state in the samples, mainly in Eu and Ti co‐doped Y₂O₃. Optical behaviour was investigated through X‐ray excited optical luminescence and photoluminescence under ultraviolet–visible (UV–vis) and vacuum ultraviolet (VUV) excitation. Results indicated that Eu³⁺ is the emitting centre in samples doped with only Eu and with both Eu and Ti with the ⁵D₀→⁷F₂ transition as the most intense, indicating Eu³⁺ in a noncentrosymmetric site. Finally, in the Eu,Ti‐doped Y₂O₃ system, Ti³⁺ (or Ti^IV) excitation was observed but no Ti emission was present, indicating a very efficient energy transfer process from Ti to Eu³⁺. These results can aid the development of efficient nanomaterials, activated using UV, VUV, or X‐rays.     

SCREENING OF PHOTOSYNTHETIC O2‐EVOLVING PROKARYOTES FOR AN INSULIN‐LIKE ANTIGEN1

Diabetes mellitus (DM), a metabolic disorder, is becoming a major health problem worldwide. Insulin is the single hope for management of type 1 diabetes, but it is not always available or suitable. For finding additional bioresources, the present study was performed. ELISA‐based preliminary screening of cyanobacterial biomass using antihuman insulin antibody have detected an insulin‐like antigen in Spirulina platensis S‐5, Spirulina NCCU‐482, and Spirulina NCCU‐483. Their similarity with insulin‐like antigen was further confirmed by electrophoretic mobility using bovine insulin as marker.     

Resolution of 1‐n‐Butyl‐3‐Methyl‐3‐Phospholene 1‐Oxide With TADDOL Derivatives and Calcium Salts of O,O'‐Dibenzoyl‐(2R,3R)‐ or O,O'‐di‐p‐Toluoyl‐(2R,3R)‐tartaric Acid

The resolution methods applying (?)‐(4R,5R)‐4,5‐bis(diphenylhydroxymethyl)‐2,2‐dimethyldioxolane (“TADDOL”), (?)‐(2R,3R)‐α,α,α',α'‐tetraphenyl‐1,4‐dioxaspiro[4.5]decan‐2,3‐dimethanol (“spiro‐TADDOL”), as well as the acidic and neutral Ca²⁺ salts of (?)‐O,O'‐dibenzoyl‐ and (?)‐O,O'‐di‐p‐toluoyl‐(2R,3R)‐tartaric acid were extended for the preparation of 1‐n‐butyl‐3‐methyl‐3‐phospholene 1‐oxide in optically active form. In one case, the intermediate diastereomeric complex could be identified by single‐crystal X‐ray analysis. The absolute P‐configuration of the enantiomers of the phospholene oxide was also determined by comparing the experimentally obtained and calculated CD spectra. Chirality 26:174–182, 2014. © 2014 Wiley Periodicals, Inc.