New O2/P2‐type Li‐Excess Layered Manganese Oxides as Promising Multi‐Functional Electrode Materials for Rechargeable Li/Na Batteries

A new and promising P2‐type layered oxide, Na_5/6[Li_1/4Mn_3/4]O₂ is prepared using a solid‐state method. Detailed crystal structures of the sample are analyzed by synchrotron X‐ray diffraction combined with high‐resolution neutron diffraction. P2‐type Na_5/6[Li_1/4Mn_3/4]O₂ consists of two MeO₂ layers with partial in‐plane √3a × √3a‐type Li/Mn ordering. Na/Li ion‐exchange in a molten salt results in a phase transition accompanied with glide of [Li_1/4Mn_3/4]O₂ layers without the destruction of in‐plane cation ordering. P2‐type Na_5/6[Li_1/4Mn_3/4]O₂ translates into an O2‐type layered structure with staking faults as the result of ion‐exchange. Electrode performance of P2‐type Na_5/6[Li_1/4Mn_3/4]O₂ and O2‐type Li_x[Li_1/4Mn_3/4]O₂ is examined and compared in Na and Li cells, respectively. Both samples show large reversible capacity, ca. 200 mA h g^?1, after charge to high voltage regardless of the difference in charge carriers. Structural analysis suggests that in‐plane structural rearrangements, presumably associated with partial oxygen loss, occur in both samples after charge to a high‐voltage region. Such structural activation process significantly influences electrode performance of the P2/O2‐type phases, similar to O3‐type Li₂MnO₃‐based materials. Crystal structures, phase‐transition mechanisms, and the possibility of the P2/O2‐type phases as high‐capacity and long‐cycle‐life electrode materials with the multi‐functionality for both rechargeable Li/Na batteries are discussed in detail.     

Layered Na‐Ion Cathodes with Outstanding Performance Resulting from the Synergetic Effect of Mixed P‐ and O‐Type Phases

Herein, the synthesis of new quaternary layered Na‐based oxides of the type Na_xMn_yNi_zFe_0.1Mg_0.1O₂ (0.67≤ x ≤ 1.0; 0.5≤ y ≤ 0.7; 0.1≤ z ≤ 0.3) is described. The synthesis can be tuned to obtain P2‐ and O3‐type as well as mixed P‐/O‐type phases as demonstrated by structural, morphological, and electrochemical properties characterization. Although all materials show good electrochemical performance, the simultaneous presence of the P‐ and O‐type phases is found to have a synergetic effect resulting in outstanding performance of the mixed phase material as a sodium‐ion cathode. The mixed P3/P2/O3‐type material, having an average elemental composition of Na_0.76Mn_0.5Ni_0.3Fe_0.1Mg_0.1O₂, overcomes the specific drawbacks associated with the P2‐ and O3‐type materials, allowing the outstanding electrochemical performance. In detail, the mixed phase material is able to deliver specific discharge capacities of up to 155 mAh g^?1 (18 mA g^?1) in the potential range of 2.0–4.3 V. In the narrower potential range of 2.5–4.3 V the material exhibits high average discharge potential (3.4 V versus Na/Na⁺), exceptional average coulombic efficiencies (>99.9%), and extraordinary capacity retention (90.2% after 601 cycles). The unexplored class of P‐/O‐type mixed phases introduces new perspectives for the development of layered positive electrode materials and powerful Na‐ion batteries.     

A New P2‐Type Layered Oxide Cathode with Extremely High Energy Density for Sodium‐Ion Batteries

Herein, a new P2‐type layered oxide is proposed as an outstanding intercalation cathode material for high energy density sodium‐ion batteries (SIBs). On the basis of the stoichiometry of sodium and transition metals, the P2‐type Na_0.55[Ni_0.1Fe_0.1Mn_0.8]O₂ cathode is synthesized without impurities phase by partially substituting Ni and Fe into the Mn sites. The partial substitution results in a smoothing of the electrochemical charge/discharge profiles and thus greatly improves the battery performance. The P2‐type Na_0.55[Ni_0.1Fe_0.1Mn_0.8]O₂ cathode delivers an extremely high discharge capacity of 221.5 mAh g^?1 with a high average potential of ≈2.9 V (vs Na/Na⁺) for SIBs. In addition, the fast Na‐ion transport in the P2‐type Na_0.55[Ni_0.1Fe_0.1Mn_0.8]O₂ cathode structure enables good power capability with an extremely high current density of 2400 mA g^?1 (full charge/discharge in 12 min) and long‐term cycling stability with ≈80% capacity retention after 500 cycles at 600 mA g^?1. A combination of electrochemical profiles, in operando synchrotron X‐ray diffraction analysis, and first‐principles calculations are used to understand the overall Na storage mechanism of P2‐type Na_0.55[Ni_0.1Fe_0.1Mn_0.8]O₂.     

Na4‐αM2+α/2(P2O7)2 (2/3 ≤ α ≤ 7/8, M = Fe,Fe0.5Mn0.5, Mn): A Promising Sodium Ion Cathode for Na‐ion Batteries

A new polyanion‐based compound, Na_3.12M_2.44(P₂O₇)₂ (M = Fe, Fe_0.5Mn_0.5, Mn) is synthesized and examined as a cathode for Na ion batteries. Off‐stoichiometric synthesis induces the formation of a Na‐rich phase, Na_3.32Fe_2.34(P₂O₇)₂ ‐ a member of the solid solution series Na_4‐αFe_2+α/2(P₂O₇)₂ (2/3 ≤ α ≤ 7/8) ‐ which delivers a reversible capacity of about 85 mA h g^?1 at ca. 3 V vs. Na/Na⁺ and exhibits very stable cycle performance. Above all, it shows fast kinetics for Na ions, delivering an almost constant 72% reversible capacity at rates between C/10 and 10C without the necessity for nanosizing or carbon coating. We attribute this to the spacious channel size along the a‐axis, along with a single phase transformation upon de/sodiation.     

Mn‐Rich P′2‐Na0.67[Ni0.1Fe0.1Mn0.8]O2 as High‐Energy‐Density and Long‐Life Cathode Material for Sodium‐Ion Batteries

Herein, P′2‐type Na_0.67[Ni_0.1Fe_0.1Mn_0.8]O₂ is introduced as a promising new cathode material for sodium‐ion batteries (SIBs) that exhibits remarkable structural stability during repetitive Na⁺ de/intercalation. The O? Ni? O? Mn? O? Fe? O bond in the octahedra of transition‐metal layers is used to suppress the elongation of the Mn? O bond and to improve the electrochemical activity, leading to the highly reversible Na storage mechanism. A high discharge capacity of ≈220 mAh g^?1 (≈605 Wh kg^?1) is delivered at 0.05 C (13 mAg^?1) with a high reversible capacity of ≈140 mAh g^?1 at 3 C and excellent capacity retention of 80% over 200 cycles. This performance is associated with the reversible P′2–OP4 phase transition and small volume change upon charge and discharge (≈3%). The nature of the sodium storage mechanism in a full cell paired with a hard carbon anode reveals an unexpectedly high energy density of ≈542 Wh kg^?1 at 0.2 C and good capacity retention of ≈81% for 500 cycles at 1 C (260 mAg^?1).     

High Performance Na0.5[Ni0.23Fe0.13Mn0.63]O2 Cathode for Sodium‐Ion Batteries

The synthesis of a new layered cathode material, Na_0.5[Ni_0.23Fe_0.13Mn_0.63]O₂, and its characterization in terms of crystalline structure and electrochemical performance in a sodium cell is reported. X‐ray diffraction studies and high resolution scanning electron microscopy images reveal a well‐defined P2‐type layered structure, while the electrochemical tests demonstrate excellent characteristics in terms of high capacity and cycle life. This performance, the low cost, and the environmental compatibility of its component poses Na_0.5[Ni_0.23Fe_0.13Mn_0.63]O₂ to be among the most promising materials for the next generation of sodium‐ion batteries.     

Emission analysis of Tb3+‐and Sm3+‐ion‐doped (Li2O/Na2O/K2O) and (Li2O + Na2O/Li2O + K2O/K2O + Na2O)‐modified borosilicate glasses

Four series of borosilicate glasses modified by alkali oxides and doped with Tb³⁺ and Sm³⁺ ions were prepared using the conventional melt quenching technique, with the chemical composition 74.5B₂O₃ + 10SiO₂ + 5MgO + R + 0.5(Tb₂O₃/Sm₂O₃) [where R = 10(Li₂O /Na₂O/K₂O) for series A and C, and R = 5(Li₂O + Na₂O/Li₂O + K₂O/K₂O + Na₂O) for series B and D]. The X‐ray diffraction (XRD) patterns of all the prepared glasses indicate their amorphous nature. The spectroscopic properties of the prepared glasses were studied by optical absorption analysis, photoluminescence excitation (PLE) and photoluminescence (PL) analysis. A green emission corresponding to the ⁵D₄ → ⁷F₅ (543 nm) transition of the Tb³⁺ ions was registered under excitation at 379 nm for series A and B glasses. The emission spectra of the Sm³⁺ ions with the series C and D glasses showed strong reddish‐orange emission at 600 nm (⁴G_5/2 →⁶H_7/2) with an excitation wavelength λ_exci = 404 nm (⁶H_5/2→⁴F_7/2). Furthermore, the change in the luminescence intensity with the addition of an alkali oxide and combinations of these alkali oxides to borosilicate glasses doped with Tb³⁺ and Sm³⁺ ions was studied to optimize the potential alkali‐oxide‐modified borosilicate glass.     

Sodium Storage and Transport Properties in Layered Na2Ti3O7 for Room‐Temperature Sodium‐Ion Batteries

Layered sodium titanium oxide, Na₂Ti₃O₇, is synthesized by a solid‐state reaction method as a potential anode for sodium‐ion batteries. Through optimization of the electrolyte and binder, the microsized Na₂Ti₃O₇ electrode delivers a reversible capacity of 188 mA h g^?1 in 1 M NaFSI/PC electrolyte at a current rate of 0.1C in a voltage range of 0.0–3.0 V, with sodium alginate as binder. The average Na storage voltage plateau is found at ca. 0.3 V vs. Na⁺/Na, in good agreement with a first‐principles prediction of 0.35 V. The Na storage properties in Na₂Ti₃O₇ are investigated from thermodynamic and kinetic aspects. By reducing particle size, the nanosized Na₂Ti₃O₇ exhibits much higher capacity, but still with unsatisfied cyclic properties. The solid‐state interphase layer on Na₂Ti₃O₇ electrode is analyzed. A zero‐current overpotential related to thermodynamic factors is observed for both nano‐ and microsized Na₂Ti₃O₇. The electronic structure, Na⁺ ion transport and conductivity are investigated by the combination of first‐principles calculation and electrochemical characterizations. On the basis of the vacancy‐hopping mechanism, a quasi‐3D energy favorable trajectory is proposed for Na₂Ti₃O₇. The Na⁺ ions diffuse between the TiO₆ octahedron layers with pretty low activation energy of 0.186 eV.     

Reaching the Energy Density Limit of Layered O3‐NaNi0.5Mn0.5O2 Electrodes via Dual Cu and Ti Substitution

Although being less competitive energy density‐wise, Na‐ion batteries are serious alternatives to Li‐ion ones for applications where cost and sustainability dominate. O3‐type sodium layered oxides could partially overcome the energy limitation, but their practical use is plagued by a reaction process that enlists numerous phase changes and volume variations while additionally being moisture sensitive. Here, it is shown that the double substitution of Ti for Mn and Cu for Ni in O3‐NaNi_0.5?yCu_yMn_{0.5? z}Ti_zO₂ can alleviate most of these issues. Among this series, electrodes with specific compositions are identified that can reversibly release and uptake ≈0.9 sodium per formula unit via a smooth voltage‐composition profile enlisting minor lattice volume changes upon cycling as opposed to ΔV/V≈23% in the parent NaNi_0.5Mn_0.5O₂ while showing a greater resistance against moisture. The positive attributes of substitution are rationalized by structure considerations supported by density functional theory (DFT) calculations. Electrodes with sustained capacities of ≈180 mAh g^?1 are successfully implemented into 18 650 Na‐ion cells having greater performances, energy density‐wise (≈250 Wh L^?1), than today's Na₃V₂(PO₄)₂F₃/HC Na‐ion technology which excels in rate capabilities. These results constitute a step forward in increasing the practicality of Na‐ion technology with additional opportunities for applications in which energy density prevails over rate capability.     

Fe‐Based Tunnel‐Type Na0.61[Mn0.27Fe0.34Ti0.39]O2 Designed by a New Strategy as a Cathode Material for Sodium‐Ion Batteries

Sodium‐ion batteries are promising for grid‐scale storage applications due to the natural abundance and low cost of sodium. However, few electrodes that can meet the requirements for practical applications are available today due to the limited routes to exploring new materials. Here, a new strategy is proposed through partially/fully substituting the redox couple of existing negative electrodes in their reduced forms to design the corresponding new positive electrode materials. The power of this strategy is demonstrated through the successful design of new tunnel‐type positive electrode materials of Na_0.61[Mn_0.61‐xFe_xTi_0.39]O₂, composed of non‐toxic and abundant elements: Na, Mn, Fe, Ti. In particular, the designed air‐stable Na_0.61[Mn_0.27Fe_0.34Ti_0.39]O₂ shows a usable capacity of ≈90 mAh g^?1, registering the highest value among the tunnel‐type oxides, and a high storage voltage of 3.56 V, corresponding to the Fe³⁺/Fe⁴⁺ redox couple realized for the first time in non‐layered oxides, which was confirmed by X‐ray absorption spectroscopy and Mössbauer spectroscopy. This new strategy would open an exciting route to explore electrode materials for rechargeable batteries.     

Direct Observation of Alternating Octahedral and Prismatic Sodium Layers in O3‐Type Transition Metal Oxides

The oxygen stacking of O3‐type layered sodium transition metal oxides (O3‐NaTMO₂) changes dynamically upon topotactic Na extraction and reinsertion. While the phase transition from octahedral to prismatic Na coordination that occurs at intermediate desodiation by transition metal slab gliding is well understood, the structural evolution at high desodiation, crucial to achieve high reversible capacity, remains mostly uncharted. In this work, the phase transitions of O3‐type layered NaTMO₂ at high voltage are investigated by combining experimental and computational approaches. An OP2‐type phase that consists of alternating octahedral and prismatic Na layers is directly observed by in situ X‐ray diffraction and high‐resolution scanning transmission electron microscopy. The origin of this peculiar phase is explained by atomic interactions involving Jahn–Teller active Fe⁴⁺ and distortion tolerant Ti⁴⁺ that stabilize the local Na environment. The path‐dependent desodiation and resodiation pathways are also rationalized in this material through the different kinetics of the prismatic and octahedral layers, presenting a comprehensive picture about the structural stability of the layered materials upon Na intercalation.     

Highly Reversible Oxygen‐Redox Chemistry at 4.1 V in Na4/7−x[□1/7Mn6/7]O2 (□: Mn Vacancy)

Increasing the energy density of rechargeable batteries is of paramount importance toward achieving a sustainable society. The present limitation of the energy density is owing to the small capacity of cathode materials, in which the (de)intercalation of ions is charge‐compensated by transition‐metal redox reactions. Although additional oxygen‐redox reactions of oxide cathodes have been recognized as an effective way to overcome this capacity limit, irreversible structural changes that occur during charge/discharge cause voltage drops and cycle degradation. Here, a highly reversible oxygen‐redox capacity of Na₂Mn₃O₇ that possesses inherent Mn vacancies in a layered structure is found. The cross validation of theoretical predictions and experimental observations demonstrates that the nonbonding 2p orbitals of oxygens neighboring the Mn vacancies contribute to the oxygen‐redox capacity without making the Mn?O bond labile, highlighting the critical role of transition‐metal vacancies for the design of reversible oxygen‐redox cathodes.     

High Capacity and High‐Rate NASICON‐Na3.75V1.25Mn0.75(PO4)3 Cathode for Na‐Ion Batteries via Modulating Electronic and Crystal Structures

Sodium superionic conductor (NASICON) cathodes are attractive for Na‐ion battery applications as they exhibit both high structural stability and high sodium ion mobility. Herein, a comprehensive study is presented on the structural and electrochemical properties of the NASICON‐Na_3+yV_2?yMn_y(PO₄)₃ (0 ≤ y ≤ 1) series. A phase miscibility gap is observed at y = 0.5, defining two solid solution domains with low and high Mn contents. Although, members of each of these domains Na_3.25V_1.75Mn_0.25(PO₄)₃ and Na_3.75V_1.25Mn_0.75(PO₄)₃ reversibly exchange sodium ions with high structural integrity, the activity of the Mn³⁺/Mn²⁺ redox couple is found to be absent and present in the former and latter candidate, respectively. Galvanostatic cycling and rate studies reveal higher capacity and rate capability for the Na_3.75V_1.25Mn_0.75(PO₄)₃ cathode (100 and 89 mA h g^?1 at 1C and 5C rate, respectively) in the Na_3+yV_2?yMn_y(PO₄)₃ series. Such a remarkable performance is attributed to optimum bottleneck size (≈5 Ų) and modulated V‐ and Mn‐redox centers as deduced from Rietveld analysis and DFT calculations, respectively. This study shows how important it is to manipulate electronic and crystal structures to achieve high‐performance NASICON cathodes.     

Realizing Three‐Electron Redox Reactions in NASICON‐Structured Na3MnTi(PO4)3 for Sodium‐Ion Batteries

Developing multielectron reaction electrode materials is essential for achieving high specific capacity and high energy density in secondary batteries; however, it remains a great challenge. Herein, Na₃MnTi(PO₄)₃/C hollow microspheres with an open and stable NASICON framework are synthesized by a spray‐drying‐assisted process. When applied as a cathode material for sodium‐ion batteries, the resultant Na₃MnTi(PO₄)₃/C microspheres demonstrate fully reversible three‐electron redox reactions, corresponding to the Ti^3+/4+ (≈2.1 V), Mn^2+/3+ (≈3.5 V), and Mn^3+/4+ (≈4.0 V vs Na⁺/Na) redox couples. In situ X‐ray diffraction results reveals that both solid‐solution and two‐phase electrochemical reactions are involved in the sodiation/desodiation processes. The high specific capacity (160 mAh g^?1 at 0.2 C), outstanding cyclability (≈92% capacity retention after 500 cycles at 2 C), and the facile synthesis make the Na₃MnTi(PO₄)₃/C a prospective cathode material for sodium‐ion batteries.     

A Novel Graphene Oxide Wrapped Na2Fe2(SO4)3/C Cathode Composite for Long Life and High Energy Density Sodium‐Ion Batteries

The cathode materials in the Na‐ion battery system are always the key issue obstructing wider application because of their relatively low specific capacity and low energy density. A graphene oxide (GO) wrapped composite, Na₂Fe₂(SO₄)₃@C@GO, is fabricated via a simple freeze‐drying method. The as‐prepared material can deliver a 3.8 V platform with discharge capacity of 107.9 mAh g^?1 at 0.1 C (1 C = 120 mA g^?1) as well as offering capacity retention above 90% at a discharge rate of 0.2 C after 300 cycles. The well‐constructed carbon network provides fast electron transfer rates, and thus, higher power density also can be achieved (75.1 mAh g^?1 at 10 C). The interface contribution of GO and Na₂Fe₂(SO₄)₃ is recognized and studied via density function theory calculation. The Na storage mechanism is also investigated through in situ synchrotron X‐ray diffraction, and pseudocapacitance contributions are also demonstrated. The diffusion coefficient of Na⁺ ions is around 10^?12–10^?10.8 cm² s^?1 during cycling. The higher working voltage of this composite is mainly ascribed to the larger electronegativity of the element S. The research indicates that this well‐constructed composite would be a competitive candidate as a cathode material for Na‐ion batteries.     

P2‐K0.75[Ni1/3Mn2/3]O2 Cathode Material for High Power and Long Life Potassium‐Ion Batteries

Rationally designed P2‐K_0.75[Ni_1/3Mn_2/3]O₂ is introduced as a novel cathode material for potassium‐ion batteries (KIBs). P2‐K_0.75[Ni_1/3Mn_2/3]O₂ cathode material designed through electrochemical ion‐exchange from P2‐Na_2/3[Ni_1/3Mn_2/3]O₂ exhibits satisfactory electrode performances; 110 mAh g^?1 (20 mA g^?1) retaining 86% of capacity for 300 cycles and unexpectedly high reversible capacity of about 91 mAh g^?1 (1400 mA g^?1) with excellent capacity retention of 83% over 500 cycles. According to theoretical and experimental investigations, the overall potassium storage mechanism of P2‐K_0.75[Ni_1/3Mn_2/3]O₂ is revealed to be a single‐phase reaction with small lattice change upon charge and discharge, presenting the Ni^4+/2+ redox couple reaction. Such high power capability is possible through the facile K⁺ migration in the K_0.75[Ni_1/3Mn_2/3]O₂ structure with a low activation barrier energy of ≈210 meV. These findings indicate that P2‐K_0.75[Ni_1/3Mn_2/3]O₂ is a promising candidate cathode material for high‐rate and long‐life KIBs.     

Bioinspired Surface Layer for the Cathode Material of High‐Energy‐Density Sodium‐Ion Batteries

Cathode materials are usually active in the range of 2–4.3 V, but the decomposition of the electrolytic salt above 4 V versus Na⁺/Na is common. Arguably, the greatest concern is the formation of HF after the reaction of the salts with water molecules, which are present as an impurity in the electrolyte. This HF ceaselessly attacks the active materials and gradually causes the failure of the electrode via electric isolation of the active materials. In this study, a bioinspired β‐NaCaPO₄ nanolayer is reported on a P2‐type layered Na_2/3[Ni_1/3Mn_2/3]O₂ cathode material. The coating layers successfully scavenge HF and H₂O, and excellent capacity retention is achieved with the β‐NaCaPO₄‐coated Na_2/3[Ni_1/3Mn_2/3]O₂ electrode. This retention is possible because a less acidic environment is produced in the Na cells during prolonged cycling. The intrinsic stability of the coating layer also assists in delaying the exothermic decomposition reaction of the desodiated electrodes. Formation and reaction mechanisms are suggested for the coating layers responsible for the excellent electrode performance. The suggested technology is promising for use with cathode materials in rechargeable sodium batteries to mitigate the effects of acidic conditions in Na cells.     

Na‐Mn‐O Nanocrystals as a High Capacity and Long Life Anode Material for Li‐Ion Batteries

Searching for a new material to build the next‐generation rechargeable lithium‐ion batteries (LIBs) with high electrochemical performance is urgently required. Owing to the low‐cost, non‐toxicity, and high‐safety, the family of manganese oxide including the Na‐Mn‐O system is regarded as one of the most promising electrode materials for LIBs. Herein, a new strategy is carried out to prepare a highly porous and electrochemically active Na_0.55Mn₂O₄·1.5H₂O (SMOH) compound. As an anode material, the Na‐Mn‐O nanocrystal material dispersed within a carbon matrix manifests a high reversible capacity of 1015.5 mA h g^?1 at a current density of 0.1 A g^?1. Remarkably, a considerable capability of 546.8 mA h g^?1 remains even after 2000 discharge/charge cycles at the higher current density of 4 A g^?1, indicating a splendid cyclability. The exceptional electrochemical properties allow SMOH to be a promising anode material toward LIBs.     

3D Porous γ‐Fe2O3@C Nanocomposite as High‐Performance Anode Material of Na‐Ion Batteries

A simple and template‐free method for preparing three‐dimensional (3D) porous γ‐Fe₂O₃@C nanocomposite is reported using an aerosol spray pyrolysis technology. The nanocomposite contains inner‐connected nanochannels and γ‐Fe₂O₃ nanoparticles (5 nm) uniformly embedded in a porous carbon matrix. The size of γ‐Fe₂O₃ nanograins and carbon content can be controlled by the concentration of the precursor solution. The unique structure of the 3D porous γ‐Fe₂O₃@C nanocomposite offers a synergistic effect to alleviate stress, accommodate large volume change, prevent nanoparticles aggregation, and facilitate the transfer of electrons and electrolyte during prolonged cycling. Consequently, the nanocomposite shows high‐rate capability and long‐term cyclability when applied as an anode material for Na‐ion batteries (SIBs). Due to the simple one‐pot synthesis technique and high electrochemical performance, 3D porous γ‐Fe₂O₃@C nanocomposites have a great potential as anode materials for rechargeable SIBs.     

A High‐Energy NASICON‐Type Cathode Material for Na‐Ion Batteries

Over the last decade, Na‐ion batteries have been extensively studied as low‐cost alternatives to Li‐ion batteries for large‐scale grid storage applications; however, the development of high‐energy positive electrodes remains a major challenge. Materials with a polyanionic framework, such as Na superionic conductor (NASICON)‐structured cathodes with formula Na_xM₂(PO₄)₃, have attracted considerable attention because of their stable 3D crystal structure and high operating potential. Herein, a novel NASICON‐type compound, Na₄MnCr(PO₄)₃, is reported as a promising cathode material for Na‐ion batteries that deliver a high specific capacity of 130 mAh g^?1 during discharge utilizing high‐voltage Mn^2+/3+ (3.5 V), Mn^3+/4+ (4.0 V), and Cr^3+/4+ (4.35 V) transition metal redox. In addition, Na₄MnCr(PO₄)₃ exhibits a high rate capability (97 mAh g^?1 at 5 C) and excellent all‐temperature performance. In situ X‐ray diffraction and synchrotron X‐ray diffraction analyses reveal reversible structural evolution for both charge and discharge.