A stable disulfide-free gene-3-protein of phage fd generated by in vitro evolution

Disulfide bonds provide major contributions to the conformational stability of proteins, and their cleavage often leads to unfolding. The gene-3-protein of the filamentous phage fd contains two disulfides in its N1 domain and one in its N2 domain, and these three disulfide bonds are essential for the stability of this protein. Here, we employed in vitro evolution to generate a disulfide-free variant of the N1-N2 protein with a high conformational stability. The gene-3-protein is essential for the phage infectivity, and we exploited this requirement for a proteolytic selection of stabilized protein variants from phage libraries. First, optimal replacements for individual disulfide bonds were identified in libraries, in which the corresponding cysteine codons were randomized. Then stabilizing amino acid replacements at non-cysteine positions were selected from libraries that were created by error-prone PCR. This stepwise procedure led to variants of N1-N2 that are devoid of all three disulfide bonds but stable and functional. The best variant without disulfide bonds showed a much higher conformational stability than the disulfide-containing wild-type form of the gene-3-protein. Despite the loss of all three disulfide bonds, the midpoints of the thermal transitions were increased from 48.5 degrees C to 67.0 degrees C for the N2 domain and from 60.0 degrees C to 78.7 degrees C for the N1 domain. The major loss in conformational stability caused by the removal of the disulfides was thus over-compensated by strongly improved non-covalent interactions. The stabilized variants were less infectious than the wild-type protein, probably because the domain mobility was reduced. Only a small fraction of the sequence space could be accessed by using libraries created by error-prone PCR, but still many strongly stabilized variants could be identified. This is encouraging and indicates that proteins can be stabilized by mutations in many different ways.     

Elimination of a cis-Proline-Containing Loop and Turn Optimization Stabilizes a Protein and Accelerates Its Folding

In the N2 domain of the gene-3-protein of phage fd, two consecutive β-strands are connected by a mobile loop of seven residues (157-163). The stability of this loop is low, and the Asp160-Pro161 bond at its tip shows conformational heterogeneity with 90% being in the cis and 10% in the trans form. The refolding kinetics of N2 are complex because the molecules with cis or trans isomers at Pro161 both fold to native-like conformations, albeit with different rates. We employed consensus design to shorten the seven-residue irregular loop around Pro161 to a four-residue type I′ turn without a proline. This increased the conformational stability of N2 by almost 10 kJ mol^− 1 and abolished the complexity of the folding kinetics. Turn sequences obtained from in vitro selections for increased stability strongly resembled those derived from the consensus design. Two other type I′ turns of N2 could also be stabilized by consensus design. For all three turns, the gain in stability originates from an increase in the rate of refolding. The turns form native-like structures early during refolding and thus stabilize the folding transition state. The crystal structure of the variant with all three stabilized turns confirms that the 157-163 loop was in fact shortened to a type I′ turn and that the other turns maintained their type I′ conformation after sequence optimization.     

A conformational unfolding reaction activates phage fd for the infection of Escherichia coli

Unfolding usually leads to the loss of the biological function of a protein. Here, we show that an unfolding reaction activates the gene-3-protein of the filamentous phage fd for its function during the infection of Escherichia coli. Before infection, the gene-3-protein is in a fully folded locked form, in which the binding site for the phage receptor TolA is buried at the domain interface. To expose this binding site, the gene-3-protein must be activated, and previously we identified the cis-to-trans isomerization at Pro213 in the hinge region between the two domains as a key step of activation. We now report that Pro213 isomerization destabilizes the protein and leads to a loss of folded structure, presumably in the hinge region. The partially unfolded form of the gene-3-protein is metastable, and trans-Pro213 arrests the protein in this activated form for an extended time, long enough to find the receptor TolA. The partial unfolding and its timing by prolyl isomerization are essential for the biological function.     

Increased folding stability of TEM-1 beta-lactamase by in vitro selection

In vitro selections of stabilized proteins lead to more robust enzymes and, at the same time, yield novel insights into the principles of protein stability. We employed Proside, a method of in vitro selection, to find stabilized variants of TEM-1 β-lactamase from Escherichia coli. Proside links the increased protease resistance of stabilized proteins to the infectivity of a filamentous phage. Several libraries of TEM-1 β-lactamase variants were generated by error-prone PCR, and variants with increased protease resistance were obtained by raising temperature or guanidinium chloride concentration during proteolytic selections. Despite the small size of phage libraries, several strongly stabilizing mutations could be obtained, and a manual combination of the best shifted the profiles for thermal unfolding and temperature-dependent inactivation of β-lactamase by almost 20 °C to a higher temperature. The wild-type protein unfolds in two stages: from the native state via an intermediate of the molten-globule type to the unfolded form. In the course of the selections, the native protein was stabilized by 27 kJ mol^− 1 relative to the intermediate and the cooperativity of unfolding was strongly increased. Three of our stabilizing replacements (M182T, A224V, and R275L) had been identified independently in naturally occurring β-lactamase variants with extended substrate spectrum. In these variants, they acted as global suppressors of destabilizations caused by the mutations in the active site. The comparison between the crystal structure of our best variant and the crystal structure of the wild-type protein indicates that most of the selected mutations optimize helices and their packing. The stabilization by the E147G substitution is remarkable. It removes steric strain that originates from an overly tight packing of two helices in the wild-type protein. Such unfavorable van der Waals repulsions are not easily identified in crystal structures or by computational approaches, but they strongly reduce the conformational stability of a protein.     

Optimization of the gbeta1 domain by computational design and by in vitro evolution: structural and energetic basis of stabilization

Computational design and in vitro evolution are major strategies for stabilizing proteins. For the four critical positions 16, 18, 25, and 29 of the B domain of the streptococcal protein G (Gbeta1), they identified the same optimal residues at positions 16 and 25, but not at 18 and 29. Here we analyzed the energetic contributions of the residues from these two approaches by single and double mutant analyses and determined crystal structures for a variant from the calculation (I16/L18/E25/K29) and from the selection (I16/I18/E25/F29). The structural analysis explains the observed differences in stabilization. Residues 16, 18, and 29 line an invagination, which results from a packing defect between the helix and the beta-sheet of Gbeta1. In all stabilized variants, residues with larger side-chains occur at these positions and packing is improved. In the selected variant, packing is better optimized than in the computed variant. Such differences in side-chain packing strongly affect stability but are difficult to evaluate by computation.     

Disulfide bonds of phospholipase A2 from bee venom yield discrete contributions to its conformational stability

Disulfide bonds are known to be crucial for protein stability. To probe the contribution of each of the five disulfide bonds (C9-C31, C30-C70, C37-C63, C61-C95, and C105-C113) in bee venom phospholipase A₂ to stability, variants with deleted disulfide bonds were produced by substituting two serine residues for each pair of cysteine residues. The mutations started from the pseudo-wild-type variant (pWT) with the mutation I1A (Markert et al., Biotechnol. Bioeng. 98 (2007) 48-59). All variants were expressed in Escherichia coli, refolded from inclusion bodies and purified as pWT. The activity of the variants ranged from 12 to 82% of pWT. From the transition curves of guanidine hydrochloride-induced unfolding, the contributions of the individual disulfide bonds to conformational stability were estimated. They increased in the sequence C9-C31 < C105-C113 < C30-C70 ≈ C37-C63 < C61-C95. For two disulfide bonds (C9-C31, C105-C113) the effects were confirmed on additionally produced variants with the substitution of cysteine by alanine. Despite distinct differences in stability, all variants showed similar cooperativity in unfolding. Selected variants were also probed for proteolytic stability toward thermolysin. The removal of disulfide bonds increased the proteolytic susceptibility of the native proteins in the same way as the stability decreased. From the comparison of the results with literature data on phospholipase A₂ from bovine pancreas possessing seven disulfide bonds, it was concluded that conserved disulfide bonds in homologous proteins fulfill related functions in conformational stability.     

Restoration of structural stability and ligand binding after removal of the conserved disulfide bond in tear lipocalin

Disulfide bonds play diverse structural and functional roles in proteins. In tear lipocalin (TL), the conserved sole disulfide bond regulates stability and ligand binding. Probing protein structure often involves thiol selective labeling for which removal of the disulfide bonds may be necessary. Loss of the disulfide bond may destabilize the protein so strategies to retain the native state are needed. Several approaches were tested to regain the native conformational state in the disulfide-less protein. These included the addition of trimethylamine N-oxide (TMAO) and the substitution of the Cys residues of disulfide bond with residues that can either form a potential salt bridge or others that can create a hydrophobic interaction. TMAO stabilized the protein relaxed by removal of the disulfide bond. In the disulfide-less mutants of TL, 1.0 M TMAO increased the free energy change (ΔG⁰) significantly from 2.1 to 3.8 kcal/mol. Moderate recovery was observed for the ligand binding tested with NBD-cholesterol. Because the disulfide bond of TL is solvent exposed, the substitution of the disulfide bond with a potential salt bridge or hydrophobic interaction did not stabilize the protein. This approach should work for buried disulfide bonds. However, for proteins with solvent exposed disulfide bonds, the use of TMAO may be an excellent strategy to restore the native conformational states in disulfide-less analogs of the proteins.     

Conservative mutation Met8 --> Leu affects the folding process and structural stability of squash trypsin inhibitor CMTI-I

Protein molecules can accommodate a large number of mutations without noticeable effects on their stability and folding kinetics. On the other hand, some mutations can have quite strong effects on protein conformational properties. Such mutations either destabilize secondary structures, e.g., alpha-helices, are incompatible with close packing of protein hydrophobic cores, or lead to disruption of some specific interactions such as disulfide cross links, salt bridges, hydrogen bonds, or aromatic-aromatic contacts. The Met8 --> Leu mutation in CMTI-I results in significant destabilization of the protein structure. This effect could hardly be expected since the mutation is highly conservative, and the side chain of residue 8 is situated on the protein surface. We show that the protein destabilization is caused by rearrangement of a hydrophobic cluster formed by side chains of residues 8, Ile6, and Leu17 that leads to partial breaking of a hydrogen bond formed by the amide group of Leu17 with water and to a reduction of a hydrophobic surface buried within the cluster. The mutation perturbs also the protein folding. In aerobic conditions the reduced wild-type protein folds effectively into its native structure, whereas more then 75% of the mutant molecules are trapped in various misfolded species. The main conclusion of this work is that conservative mutations of hydrophobic residues can destabilize a protein structure even if these residues are situated on the protein surface and partially accessible to water. Structural rearrangement of small hydrophobic clusters formed by such residues can lead to local changes in protein hydration, and consequently, can affect considerably protein stability and folding process.     

Energetic Communication between Functional Sites of the Gene-3-Protein during Infection by Phage fd

To initiate infection of Escherichia coli, phage fd uses its gene-3-protein (G3P) to bind first to an F pilus and then to the TolA protein at the cell surface. G3P is normally auto-inhibited because a tight interaction between the two N-terminal domains N1 and N2 buries the TolA binding site. Binding of N2 to the pilus activates G3P by initiating long-range conformational changes that are relayed to the domain interface and to a proline timer. We discovered that the 23–28 loop of the N1 domain is critical for propagating these conformational signals. The analysis of the stability and the folding dynamics of G3P variants with a shortened loop combined with TolA interaction studies and phage infection experiments reveal how the contact between the N2 domain and the 23–28 loop of N1 is energetically linked with the interdomain region and the proline timer and how it affects phage infectivity. Our results illustrate how conformational transitions and prolyl cis/trans isomerization can be coupled energetically and how conformational signals to and from prolines can be propagated over long distances in proteins.     

Contribution of disulfide bonds to the conformational stability and catalytic activity of ribonuclease A.

Disulfide bonds between the side chains of cysteine residues are the only common crosslinks in proteins. Bovine pancreatic ribonuclease A (RNase A) is a 124-residue enzyme that contains four interweaving disulfide bonds (Cys26-Cys84, Cys40-Cys95, Cys58-Cys110, and Cys65-Cys72) and catalyzes the cleavage of RNA. The contribution of each disulfide bond to the conformational stability and catalytic activity of RNase A has been determined by using variants in which each cystine is replaced independently with a pair of alanine residues. Thermal unfolding experiments monitored by ultraviolet spectroscopy and differential scanning calorimetry reveal that wild-type RNase A and each disulfide variant unfold in a two-state process and that each disulfide bond contributes substantially to conformational stability. The two terminal disulfide bonds in the amino-acid sequence (Cys26-Cys84 and Cys58-Cys110) enhance stability more than do the two embedded ones (Cys40-Cys95 and Cys65-Cys72). Removing either one of the terminal disulfide bonds liberates a similar number of residues and has a similar effect on conformational stability, decreasing the midpoint of the thermal transition by almost 40 degrees C. The disulfide variants catalyze the cleavage of poly(cytidylic acid) with values of kcat/Km that are 2- to 40-fold less than that of wild-type RNase A. The two embedded disulfide bonds, which are least important to conformational stability, are most important to catalytic activity. These embedded disulfide bonds likely contribute to the proper alignment of residues (such as Lys41 and Lys66) that are necessary for efficient catalysis of RNA cleavage.     

Optimized variants of the cold shock protein from in vitro selection: structural basis of their high thermostability

The bacterial cold shock proteins (Csp) are widely used as models for the experimental and computational analysis of protein stability. In a previous study, in vitro evolution was employed to identify strongly stabilizing mutations in Bs-CspB from Bacillus subtilis. The best variant found by this approach contained the mutations M1R, E3K and K65I, which raised the midpoint of thermal unfolding of Bs-CspB from 53.8 degrees C to 83.7 degrees C, and increased the Gibbs free energy of stabilization by 20.9 kJ mol(-1). Another selected variant with the two mutations A46K and S48R was stabilized by 11.1 kJ mol(-1). To elucidate the molecular basis of these stabilizations, we determined the crystal structures of these two Bs-CspB variants. The mutated residues are generally well ordered and provide additional stabilizing interactions, such as charge interactions, additional hydrogen bonds and improved side-chain packing. Several mutations improve the electrostatic interactions, either by the removal of unfavorable charges (E3K) or by compensating their destabilizing interactions (A46K, S48R). The stabilizing mutations are clustered at a contiguous surface area of Bs-CspB, which apparently is critically important for the stability of the beta-barrel structure but not well optimized in the wild-type protein.     

Modulating catalytic activity by unnatural amino acid residues in a GSH-binding loop of GST P1-1

The loop following helix α2 in glutathione transferase P1-1 has two conserved residues, Cys48 and Tyr50, important for glutathione (GSH) binding and catalytic activity. Chemical modification of Cys48 thwarts the catalytic activity of the enzyme, and mutation of Tyr50 generally decreases the k_cat value and the affinity for GSH in a differential manner. Cys48 and Tyr50 were targeted by site-specific mutations and chemical modifications in order to investigate how the α2 loop modulates GSH binding and catalysis. Mutation of Cys48 into Ala increased K_M^GSH 24-fold and decreased the binding energy of GSH by 1.5 kcal/mol. Furthermore, the protein stability against thermal inactivation and chemical denaturation decreased. The crystal structure of the Cys-free variant was determined, and its similarity to the wild-type structure suggests that the mutation of Cys48 increases the flexibility of the α2 loop rather than dislocating the GSH-interacting residues. On the other hand, replacement of Tyr50 with Cys, producing mutant Y50C, increased the Gibbs free energy of the catalyzed reaction by 4.8 kcal/mol, lowered the affinity for S-hexyl glutathione by 2.2 kcal/mol, and decreased the thermal stability. The targeted alkylation of Cys50 in Y50C increased the affinity for GSH and protein stability. Characterization of the most active alkylated variants, S-n-butyl-, S-n-pentyl-, and S-cyclobutylmethyl-Y50C, indicated that the affinity for GSH is restored by stabilizing the α2 loop through positioning of the key residue into the lock structure of the neighboring subunit. In addition, k_cat can be further modulated by varying the structure of the key residue side chain, which impinges on the rate-limiting step of catalysis.     

Structural effects induced by removal of a disulfide-bridge: the X-ray structure of the C30A/C51A mutant of basic pancreatic trypsin inhibitor at 1.6 A.

The X-ray structure of a variant of basic pancreatic trypsin inhibitor (BPTI) has been analyzed to determine the structural accommodation resulting from removal of a disulfide cross-link in a protein. The disulfide removed, Cys30-Cys51, has been implicated in both the folding pathway of the protein and its overall thermal stability. In the variant studied, C30A/C51A, the disulfide cysteines were replaced by less bulky alanines. The atomic displacements observed for C30A/C51A indicate a set of concerted shifts of two segments of chains, which together significantly diminish a packing defect at the site of the removed cysteine sulfur atoms. The observed structural changes are distributed asymmetrically around the sites of mutation, indicating that the adjacent beta-sheet is more resistant to the perturbation than the alpha-helix on the opposite side of the disulfide bond. The thermal parameters of groups involved in the structural accommodation are not significantly altered. A comparison of the X-ray structures reported for native BPTI determined in three different crystal forms indicates that the magnitude of its conformational variability exceeds that of the structural changes caused by the disulfide removal. This emphasizes the necessity of using isomorphous crystal systems to determine the relatively small effects due to mutation.     

Selective Removal of Individual Disulfide Bonds within a Potato Type II Serine Proteinase Inhibitor from Nicotiana alata Reveals Differential Stabilization of the Reactive-Site Loop

The 53-amino-acid trypsin inhibitor 1 from Nicotiana alata (T1) belongs to the potato type II family also known as the PinII family of proteinase inhibitors, one of the major families of canonical proteinase inhibitors. T1 contains four disulfide bonds, two of which (C4-C41 and C8-C37) stabilize the reactive-site loop. To investigate the influence of these two disulfide bonds on the structure and function of potato II inhibitors, we constructed two variants of T1, C4A/C41A-T1 and C8A/C37A-T1, in which these two disulfide bonds were individually removed and replaced by alanine residues. Trypsin inhibition assays show that wild-type T1 has a K_i of < 5 nM, C4A/C41A-T1 has a weaker K_i of ∼ 350 nM, and the potency of the C8A/C37A variant is further decreased to a K_i of ∼ 1.8 μM. To assess the influence of the disulfide bonds on the structure of T1, we determined the structure and dynamics of both disulfide variants by NMR spectroscopy. The structure of C4A/C41A-T1 and the amplitude of intrinsic flexibility in the reactive-site loop resemble that of the wild-type protein closely, despite the lack of the C4-C41 disulfide bond, whereas the timescale of motions is markedly decreased. The rescue of the structure despite loss of a disulfide bond is due to a previously unrecognized network of interactions, which stabilizes the structure of the reactive-site loop in the region of the missing disulfide bond, while allowing intrinsic motions on a fast (picosecond-nanosecond) timescale. In contrast, no comparable interactions are present around the C8-C37 disulfide bond. Consequently, the reactive-site loop becomes disordered and highly flexible in the structure of C8A/C37A-T1, making it unable to bind to trypsin. Thus, the reactive-site loop of T1 is stabilized differently by the C8-C37 and C4-C41 disulfide bonds. The C8-C37 disulfide bond is essential for the inhibitory activity of T1, whereas the C4-C41 disulfide bond is not as critical for maintaining the three-dimensional structure and function of the molecule but is responsible for maintaining flexibility of the reactive-site loop on a microsecond-nanosecond timescale.     

F-Actin Structure Destabilization and DNase I Binding Loop Fluctuations: Mutational Cross-Linking and Electron Microscopy Analysis of Loop States and Effects on F-Actin

The conformational dynamics of filamentous actin (F-actin) is essential for the regulation and functions of cellular actin networks. The main contribution to F-actin dynamics and its multiple conformational states arises from the mobility and flexibility of the DNase I binding loop (D-loop; residues 40-50) on subdomain 2. Therefore, we explored the structural constraints on D-loop plasticity at the F-actin interprotomer space by probing its dynamic interactions with the hydrophobic loop (H-loop), the C-terminus, and the W-loop via mutational disulfide cross-linking. To this end, residues of the D-loop were mutated to cysteines on yeast actin with a C374A background. These mutants showed no major changes in their polymerization and nucleotide exchange properties compared to wild-type actin. Copper-catalyzed disulfide cross-linking was investigated in equimolar copolymers of cysteine mutants from the D-loop with either wild-type (C374) actin or mutant S265C/C374A (on the H-loop) or mutant F169C/C374A (on the W-loop). Remarkably, all tested residues of the D-loop could be cross-linked to residues 374, 265, and 169 by disulfide bonds, demonstrating the plasticity of the interprotomer region. However, each cross-link resulted in different effects on the filament structure, as detected by electron microscopy and light-scattering measurements. Disulfide cross-linking in the longitudinal orientation produced mostly no visible changes in filament morphology, whereas the cross-linking of D-loop residues > 45 to the H-loop, in the lateral direction, resulted in filament disruption and the presence of amorphous aggregates on electron microscopy images. A similar aggregation was also observed upon cross-linking the residues of the D-loop (> 41) to residue 169. The effects of disulfide cross-links on F-actin stability were only partially accounted for by the simulations of current F-actin models. Thus, our results present evidence for the high level of conformational plasticity in the interprotomer space and document the link between D-loop interactions and F-actin stability.     

Conformational stability is a determinant of ribonuclease A cytotoxicity

Onconasetrade mark, a homolog of bovine pancreatic ribonuclease A (RNase A) with high conformational stability, is cytotoxic and has efficacy as a cancer chemotherapeutic agent. Unlike wild-type RNase A, the G88R variant is toxic to cancer cells. Here, variants in which disulfide bonds were removed from or added to G88R RNase A were used to probe the relationship between conformational stability and cytotoxicity in a methodical manner. The conformational stability of the C40A/G88R/C95A and C65A/C72A/G88R variants is less than that of G88R RNase A. In contrast, a new disulfide bond that links the N and C termini (residues 4 and 118) increases the conformational stability of G88R RNase A and C65A/C72A/G88R RNase A. These changes have little effect on the ribonucleolytic activity of the enzyme or on its ability to evade the cytosolic ribonuclease inhibitor protein. The changes do, however, have a substantial effect on toxicity toward human erythroleukemia cells. Specifically, conformational stability correlates directly with cytotoxicity as well as with resistance to proteolysis. These data indicate that conformational stability is a key determinant of RNase A cytotoxicity and suggest that cytotoxicity relies on avoiding proteolysis. This finding suggests a means to produce new cancer chemotherapeutic agents based on mammalian ribonucleases.     

The folding process of acylphosphatase from Escherichia coli is remarkably accelerated by the presence of a disulfide bond

The acylphosphatase from Escherichia coli (EcoAcP) is the first AcP so far studied with a disulfide bond. A mutational variant of the enzyme lacking the disulfide bond has been produced by substituting the two cysteine residues with alanine (EcoAcP mutational variant C5A/C49A, mutEcoAcP). The native states of the two protein variants are similar, as shown by far-UV and near-UV circular dichroism and dynamic light-scattering measurements. From unfolding experiments at equilibrium using intrinsic fluorescence and far-UV circular dichroism as probes, EcoAcP shows an increased conformational stability as compared with mutEcoAcP. The wild-type protein folds according to a two-state model with a very fast rate constant (k_F^H2O = 72,600 s^− 1), while mutEcoAcP folds ca 1500-fold slower, via the accumulation of a partially folded species. The correlation between the hydrophobicity of the polypeptide chain and the folding rate, found previously in the AcP-like structural family, is maintained only when considering the mutant but not the wild-type protein, which folds much faster than expected from this correlation. Similarly, the correlation between the relative contact order and the folding rate holds only for mutEcoAcP. The correlation also holds for EcoAcP, provided the relative contact order value is recalculated by considering the disulfide bridge as an alternate path for the backbone to determine the shortest sequence separation between contacting residues. These results indicate that the presence of a disulfide bond in a protein is an important determinant of the folding rate and allows its contribution to be determined in quantitative terms.     

Structure and dynamic properties of the single disulfide-deficient α-amylase inhibitor [C45A/C73A]tendamistat: An NMR study

Covalent linkages such as disulfide bonds are important for the stabilization of proteins. In the present NMR study we compare the structure and the dynamics of the single disulfide-deficient variant C45A/C73A of the α-amylase inhibitor tendamistat and the wild-type protein, which contains two disulfide bonds (C11-C27 and C45-C73). Complete proton assignment was achieved by standard homonuclear 2D techniques for the variant. Chemical shift differences, intra-strand NOE effects and protected amide proton were used to compare the connectivity of the secondary structure elements of variant and wild-type. Dynamic properties of the wild-type protein were studied by ¹³C_α heteronuclear NOE experiments with carbon in natural abundance. ¹⁵N isotope labeling was necessary to obtain the relaxation parameters of the variant, because of sample degradation. The ¹⁵N resonance assignment was achieved by a ¹⁵N 3D-NOESY-HMQC. Removal of the C45-C73 bond by the C45A/C73A mutation has no influence upon the β-barrel structure of tendamistat beside very local changes at the mutation site. The relaxation data revealed only subtle differences between variant and wild-type on a subnanosecond time scale. Only the N-terminus and G62 in the connecting loop between the anti-parallel β-sheets showed an increased mobility. The results are discussed in respect to thermodynamic stability and the secretion efficiency of tendamistat. Proteins 33:285–294, 1998. © 1998 Wiley-Liss, Inc.     

Evolutionary stabilization of the gene-3-protein of phage fd reveals the principles that govern the thermodynamic stability of two-domain proteins

The gene-3-protein (G3P) of filamentous phage is essential for their propagation. It consists of three domains. The CT domain anchors G3P in the phage coat, the N2 domain binds to the F pilus of Escherichia coli and thus initiates infection, and the N1 domain continues by interacting with the TolA receptor. Phage are thus only infective when the three domains of G3P are tightly linked, and this requirement is exploited by Proside, an in vitro selection method for proteins with increased stability. In Proside, a repertoire of variants of the protein to be stabilized is inserted between the N2 and the CT domains of G3P. Stabilized variants can be selected because they resist cleavage by a protease and thus maintain the essential linkage between the domains. The method is limited by the proteolytic stability of G3P itself. We improved the stability of G3P by subjecting the phage without a guest protein to rounds of random in vivo mutagenesis and proteolytic Proside selections. Variants of G3P with one to four mutations were selected, and the temperature at which the corresponding phage became accessible for a protease increased in a stepwise manner from 40 degrees C to almost 60 degrees C. The N1-N2 fragments of wild-type gene-3-protein and of the four selected variants were purified and their stabilities towards thermal and denaturant-induced unfolding were determined. In the biphasic transitions of these proteins domain dissociation and unfolding of N2 occur in a concerted reaction in the first step, followed by the independent unfolding of domain N1 in the second step. N2 is thus less stable than N1, and it unfolds when the interactions with N1 are broken. The strongest stabilizations were caused by mutations in domain N2, in particular in its hinge subdomain, which provides many stabilizing interactions between the N1 and N2 domains. These results reveal how the individual domains and their assembly contribute to the overall stability of two-domain proteins and how mutations are optimally placed to improve the stability of such proteins.     

Key Amino Acid Residues Involved in Multi-Point Binding Interactions between Brazzein, a Sweet Protein, and the T1R2-T1R3 Human Sweet Receptor

The sweet protein brazzein [recombinant protein with sequence identical with the native protein lacking the N-terminal pyroglutamate (the numbering system used has Asp2 as the N-terminal residue)] activates the human sweet receptor, a heterodimeric G-protein-coupled receptor composed of subunits Taste type 1 Receptor 2 (T1R2) and Taste type 1 Receptor 3 (T1R3). In order to elucidate the key amino acid(s) responsible for this interaction, we mutated residues in brazzein and each of the two subunits of the receptor. The effects of brazzein mutations were assayed by a human taste panel and by an in vitro assay involving receptor subunits expressed recombinantly in human embryonic kidney cells; the effects of the receptor mutations were assayed by in vitro assay. We mutated surface residues of brazzein at three putative interaction sites: site 1 (Loop43), site 2 (N- and C-termini and adjacent Glu36, Loop33), and site 3 (Loop9-19). Basic residues in site 1 and acidic residues in site 2 were essential for positive responses from each assay. Mutation of Y39A (site 1) greatly reduced positive responses. A bulky side chain at position 54 (site 2), rather than a side chain with hydrogen-bonding potential, was required for positive responses, as was the presence of the native disulfide bond in Loop9-19 (site 3). Results from mutagenesis and chimeras of the receptor indicated that brazzein interacts with both T1R2 and T1R3 and that the Venus flytrap module of T1R2 is important for brazzein agonism. With one exception, all mutations of receptor residues at putative interaction sites predicted by wedge models failed to yield the expected decrease in brazzein response. The exception, hT1R2 (human T1R2 subunit of the sweet receptor):R217A/hT1R3 (human T1R3 subunit of the sweet receptor), which contained a substitution in lobe 2 at the interface between the two subunits, exhibited a small selective decrease in brazzein activity. However, because the mutation was found to increase the positive cooperativity of binding by multiple ligands proposed to bind both T1R subunits (brazzein, monellin, and sucralose) but not those that bind to a single subunit (neotame and cyclamate), we suggest that this site is involved in subunit-subunit interaction rather than in direct brazzein binding. Results from this study support a multi-point interaction between brazzein and the sweet receptor by some mechanism other than the proposed wedge models.