Conversion of the maltogenic alpha-amylase Novamyl into a CGTase

Novamyl is a thermostable five-domain maltogenic alpha-amylase that shows sequence and structural homology with the cyclodextrin glycosyltransferases (CGTases). Comparing X-ray crystal structures of Novamyl and CGTases, two major differences in the active site cleft were observed: Novamyl contains a loop insertion consisting of five residues (residues 191-195) and the location of an aromatic residue known to be essential to obtain an efficient cyclization reaction. To convert Novamyl into a cyclodextrin (CD)-producing enzyme, the loop was deleted and two substitutions, F188L and T189Y, were introduced. Unlike the parent Novamyl, the obtained variant is able to produce beta-CD and showed an overall conversion of starch to CD of 9%, compared with CGTases which are able to convert up to 40%. The lower conversion compared with the CGTase is probably due to additional differences in the active site cleft and in the starch-binding E domain. A variant with only the five-residue loop deleted was not able to form beta-CD.     

Rational design of cyclodextrin glycosyltransferase from Bacillus circulans strain 251 to increase alpha-cyclodextrin production

Cyclodextrin glycosyltransferases (CGTase) (EC 2.4.1.19) are extracellular bacterial enzymes that generate cyclodextrins from starch. All known CGTases produce mixtures of alpha, beta, and gamma-cyclodextrins. A maltononaose inhibitor bound to the active site of the CGTase from Bacillus circulans strain 251 revealed sugar binding subsites, distant from the catalytic residues, which have been proposed to be involved in the cyclodextrin size specificity of these enzymes. To probe the importance of these distant substrate binding subsites for the alpha, beta, and gamma-cyclodextrin product ratios of the various CGTases, we have constructed three single and one double mutant, Y89G, Y89D, S146P and Y89D/S146P, using site-directed mutagenesis. The mutations affected the cyclization, coupling; disproportionation and hydrolyzing reactions of the enzyme. The double mutant Y89D/S146P showed a twofold increase in the production of alpha-cyclodextrin from starch. This mutant protein was crystallized and its X-ray structure, in a complex with a maltohexaose inhibitor, was determined at 2.4 A resolution. The bound maltohexaose molecule displayed a binding different from the maltononaose inhibitor, allowing rationalization of the observed change in product specificity. Hydrogen bonds (S146) and hydrophobic contacts (Y89) appear to contribute strongly to the size of cyclodextrin products formed and thus to CGTase product specificity. Changes in sugar binding subsites -3 and -7 thus result in mutant proteins with changed cyclodextrin production specificity.     

环糊精葡萄糖基转移酶的结构特征与催化机理

随着环糊精在食品、医药等领域的应用越来越广,生产环糊精所必需的环糊精葡萄糖基转移酶(CGT酶)已经成为当今研究的热点。特别是近二十年来,国外对该酶进行了比较深入的研究。首先介绍了CGT酶的功能特性与结构特征。CGT酶是一种多功能型酶,能催化三种转糖基反应(歧化、环化和耦合反应)和水解反应,其中,能将淀粉转化为环糊精的环化反应是特征反应;作为α-淀粉酶家族的成员,CGT酶除了具有与α-淀粉酶相同的A、B、C结构域外,还存在D和E结构域。另外,对CGT酶的催化机理包括底物结合方式、转糖苷反应机理以及环化机理等进行了详细的讨论。     

Cyclization characteristics of cyclodextrin glucanotransferase are conferred by the NH2-terminal region of the enzyme.

Cyclodextrin glucanotransferase (CGTase; EC 2.4.1.19) is produced mainly by Bacillus strains. CGTase from Bacillus macerans IFO3490 produces alpha-cyclodextrin as the major hydrolysis product from starch, whereas thermostable CGTase from Bacillus stearothermophilus NO2 produces alpha- and beta-cyclodextrins. To analyze the cyclization characteristics of CGTase, we cloned different types of CGTase genes and constructed chimeric genes. CGTase genes from these two strains were cloned in Bacillus subtilis NA-1 by using pTB523 as a vector plasmid, and their nucleotide sequences were determined. Three CGTase genes (cgt-1, cgt-5, and cgt-232) were isolated from B. stearothermophilus NO2. Nucleotide sequence analysis revealed that the three CGTase genes have different nucleotide sequences encoding the same amino acid sequence. Base substitutions were found at the third letter of five codons among the three genes. Each open reading frame was composed of 2,133 bases, encoding 711 amino acids containing 31 amino acids as a signal sequence. The molecular weight of the mature enzyme was estimated to be 75,374. The CGTase gene (cgtM) of B. macerans IFO3490 was composed of 2,142 bases, encoding 714 amino acids containing 27 residues as a signal sequence. The molecular weight of the mature enzyme was estimated to be 74,008. The sequence determined in this work was quite different from that reported previously by other workers. From data on the three-dimensional structure of a CGTase, seven kinds of chimeric CGTase genes were constructed by using cgt-1 from B. stearothermophilus NO2 and cgtM from B. macerans IFO3490. We examined the characteristics of these chimeric enzymes on cyclodextrin production and thermostability. It was found that the cyclization reaction was conferred by the NH2-terminal region of CGTase and that the thermostability of some chimeric enzymes was lower than that of the parental CGTases.     

Cyclization characteristics of cyclodextrin glucanotransferase are conferred by the NH2-terminal region of the enzyme.

Cyclodextrin glucanotransferase (CGTase; EC 2.4.1.19) is produced mainly by Bacillus strains. CGTase from Bacillus macerans IFO3490 produces alpha-cyclodextrin as the major hydrolysis product from starch, whereas thermostable CGTase from Bacillus stearothermophilus NO2 produces alpha- and beta-cyclodextrins. To analyze the cyclization characteristics of CGTase, we cloned different types of CGTase genes and constructed chimeric genes. CGTase genes from these two strains were cloned in Bacillus subtilis NA-1 by using pTB523 as a vector plasmid, and their nucleotide sequences were determined. Three CGTase genes (cgt-1, cgt-5, and cgt-232) were isolated from B. stearothermophilus NO2. Nucleotide sequence analysis revealed that the three CGTase genes have different nucleotide sequences encoding the same amino acid sequence. Base substitutions were found at the third letter of five codons among the three genes. Each open reading frame was composed of 2,133 bases, encoding 711 amino acids containing 31 amino acids as a signal sequence. The molecular weight of the mature enzyme was estimated to be 75,374. The CGTase gene (cgtM) of B. macerans IFO3490 was composed of 2,142 bases, encoding 714 amino acids containing 27 residues as a signal sequence. The molecular weight of the mature enzyme was estimated to be 74,008. The sequence determined in this work was quite different from that reported previously by other workers. From data on the three-dimensional structure of a CGTase, seven kinds of chimeric CGTase genes were constructed by using cgt-1 from B. stearothermophilus NO2 and cgtM from B. macerans IFO3490. We examined the characteristics of these chimeric enzymes on cyclodextrin production and thermostability. It was found that the cyclization reaction was conferred by the NH2-terminal region of CGTase and that the thermostability of some chimeric enzymes was lower than that of the parental CGTases.     

Mutations affecting the activity of the cyclodextrin glucanotransferase of Paenibacillus pabuli US132: insights into the low hydrolytic activity of cyclodextrin glucanotransferases

The cyclodextrin glucanotransferase from Paenibacillus pabuli US132 (US132 CGTase) was engineered using a rational approach in an attempt to provide it with anti-staling properties comparable to those of the commercial maltogenic amylase (Novamyl). The study aimed to concurrently decrease the cyclization activity and increase the hydrolytic activity of US132 CGTase. A five-residue loop (PAGFS) was inserted, alone or with the substitution of essential residues for cyclization (G180, L194 and Y195), mimicking the case of Novamyl. The findings indicate that, unlike the case of the CGTase of Thermoanerobacterium thermosulfurigenes strain EM1 whose initial high hydrolytic activity was exceptional, these mutations completely abolished the cyclization and hydrolytic activities of the US132 CGTase. This suggests that those mutations are not able to convert conventional CGTases, whose hydrolytic activities are very weak, into hydrolases. Accordingly, and for the first time, a structural barrier at subsite ?3 was advanced as an influential factor which might explain the low hydrolytic activity of conventional CGTases.     

Site-directed mutations in Alanine 223 and Glycine 255 in the acceptor site of gamma-Cyclodextrin glucanotransferase from Alkalophilic Bacillus clarkii 7364 affect cyclodextrin production

A cyclodextrin glucanotransferase (CGTase) from Bacillus clarkii 7364 converts starch into gamma-cyclodextrin (gamma-CD) with high specificity. Comparison of the deduced amino acid sequence of this CGTase with those of other typical CGTases revealed that several amino acids are deleted or substituted with others at several subsites. Of these amino acids, Ala223 at subsite +2 and Gly255 at subsite +3 in the acceptor site of the enzyme were replaced by several amino acids through site-directed mutagenesis. The replacement of Ala223 by lysine, arginine and histidine strongly enhanced the gamma-CD-forming activity in the neutral pH range. On the other hand, all mutants obtained on replacing Gly255 with the above amino acids showed significant decreases in the gamma-CD-forming activity. Taking into account both the kinetic parameters and pKa values of the side chains of the three basic amino acids, the protonation state of the amino groups in their side chains at subsite +2 seems to enhance the hydrogen bonding interaction between these basic amino acids and the glucose residues of linear oligosaccharides. The enhancement of the interaction may play an important role by helping the substrate reach subsite +1, hence increasing the gamma-CD-forming activity and kcat value.     

Relation between domain evolution, specificity, and taxonomy of the alpha-amylase family members containing a C-terminal starch-binding domain.

The alpha-amylase family (glycoside hydrolase family 13; GH 13) contains enzymes with approximately 30 specificities. Six types of enzyme from the family can possess a C-terminal starch-binding domain (SBD): alpha-amylase, maltotetraohydrolase, maltopentaohydrolase, maltogenic alpha-amylase, acarviose transferase, and cyclodextrin glucanotransferase (CGTase). Such enzymes are multidomain proteins and those that contain an SBD consist of four or five domains, the former enzymes being mainly hydrolases and the latter mainly transglycosidases. The individual domains are labelled A [the catalytic (beta/alpha)8-barrel], B, C, D and E (SBD), but D is lacking from the four-domain enzymes. Evolutionary trees were constructed for domains A, B, C and E and compared with the 'complete-sequence tree'. The trees for domains A and B and the complete-sequence tree were very similar and contain two main groups of enzymes, an amylase group and a CGTase group. The tree for domain C changed substantially, the separation between the amylase and CGTase groups being shortened, and a new border line being suggested to include the Klebsiella and Nostoc CGTases (both four-domain proteins) with the four-domain amylases. In the 'SBD tree' the border between hydrolases (mainly alpha-amylases) and transglycosidases (principally CGTases) was not readily defined, because maltogenic alpha-amylase, acarviose transferase, and the archaeal CGTase clustered together at a distance from the main CGTase cluster. Moreover the four-domain CGTases were rooted in the amylase group, reflecting sequence relationships for the SBD. It appears that with respect to the SBD, evolution in GH 13 shows a transition in the segment of the proteins C-terminal to the catalytic (beta/alpha)8-barrel(domain A).     

Effects of essential carbohydrate/aromatic stacking interaction with Tyr100 and Phe259 on substrate binding of cyclodextrin glycosyltransferase from alkalophilic Bacillus sp. 1011

The stacking interaction between a tyrosine residue and the sugar ring at the catalytic subsite -1 is strictly conserved in the glycoside hydrolase family 13 enzymes. Replacing Tyr100 with leucine in cyclodextrin glycosyltransferase (CGTase) from Bacillus sp. 1011 to prevent stacking significantly decreased all CGTase activities. The adjacent stacking interaction with both Phe183 and Phe259 onto the sugar ring at subsite +2 is essentially conserved among CGTases. F183L/F259L mutant CGTase affects donor substrate binding and/or acceptor binding during transglycosylation [Nakamura et al. (1994) Biochemistry 33, 9929-9936]. To elucidate the precise role of carbohydrate/aromatic stacking interaction at subsites -1 and +2 on the substrate binding of CGTases, we analyzed the X-ray structures of wild-type (2.0 A resolution), and Y100L (2.2 A resolution) and F183L/F259L mutant (1.9 A resolution) CGTases complexed with the inhibitor, acarbose. The refined structures revealed that acarbose molecules bound to the Y100L mutant moved from the active center toward the side chain of Tyr195, and the hydrogen bonding and hydrophobic interaction between acarbose and subsites significantly diminished. The position of pseudo-tetrasaccharide binding in the F183L/F259L mutant was closer to the non-reducing end, and the torsion angles of glycosidic linkages at subsites -1 to +1 on molecule 1 and subsites -2 to -1 on molecule 2 significantly changed compared with that of each molecule of wild-type-acarbose complex to adopt the structural change of subsite +2. These structural and biochemical data suggest that substrate binding in the active site of CGTase is critically affected by the carbohydrate/aromatic stacking interaction with Tyr100 at the catalytic subsite -1 and that this effect is likely a result of cooperation between Tyr100 and Phe259 through stacking interaction with substrate at subsite +2.     

The residue 179 is involved in product specificity of the <Emphasis Type="Italic">Bacillus circulans</Emphasis> DF 9R cyclodextrin glycosyltransferase

Cyclodextrin glycosyltransferases (CGTases) are important enzymes in biotechnology because of their ability to produce cyclodextrin (CD) mixtures from starch whose relative composition depends on enzyme source. A multiple alignment of 46 CGTases and Shannon entropy analysis allowed us to find differences and similarities that could be related to product specificity. Interestingly, position 179 has Gly in all the CGTases except in that from Bacillus circulans DF 9R which possesses Gln. The absence of a side chain at that position has been considered as a strong requirement for substrate binding and cyclization process. Therefore, we constructed two mutants of this enzyme, Q179L and Q179G. The activity and kinetic parameters of Q179G remained unchanged while the Q179L mutant showed a different CDs ratio, a lower catalytic efficiency, and a decreased ability to convert starch into CDs. We show that position 179 is involved in CGTase product specificity and must be occupied by Gly—without a side chain—or by amino acid residues able to interact with the substrate through hydrogen bonds in a way that the cyclization process occurs efficiently. These findings are also explained on the basis of a structural model.     

Mutations at subsite −3 in cyclodextrin glycosyltransferase from <Emphasis Type="Italic">Paenibacillus macerans</Emphasis> enhancing α-cyclodextrin specificity

A major disadvantage of cyclodextrin production is the limited cyclodextrin product specificity of cyclodextrin glycosyltransferase (CGTase). Here, we described mutations of Asp372 and Tyr89 at subsite −3 in the CGTase from Paenibacillus macerans strain JFB05-01. The results showed that Asp372 and Tyr89 played important roles in cyclodextrin product specificity of CGTase. The replacement of Asp372 by lysine and Tyr89 by aspartic acid, asparagine, lysine, and arginine resulted in a shift in specificity towards the production of α-cyclodextrin, which was most apparent for the mutants D372K and Y89R. Furthermore, the changes in cyclodextrin product specificity for the single mutants D372K and Y89R could be combined in the double mutant D372K/Y89R, which displayed a 1.5-fold increase in the production of α-cyclodextrin, with a concomitant 43% decrease in the production of β-cyclodextrin when compared to the wild-type CGTase. Thus, the D372K and Y89R single and double mutants were much more suitable for the industrial production of α-cyclodextrin than the wild-type enzyme. The enhanced α-cyclodextrin specificity of these mutants might be a result of stabilizing the bent conformation of the intermediate in the cyclization reaction.     

Hydrophobic interaction chromatography on octyl sepharose--an approach for one-step platform purification of cyclodextrin glucanotransferases

Cyclodextrin glucanotransferase (CGTase) from Bacillus circulans ATCC 21783 was concentrated by ultrafiltration and subsequently purified by hydrophobic interaction chromatography on Octyl Sepharose 4 fast flow. The matrix was able to bind selectively to the enzyme at a very low ammonium sulfate concentration of 0.67 M and enzyme desorption was performed by decreasing gradient of the salt. The overall recovery was 80% with 689-fold purity. CGTases derived from four soil isolates and Toruzyme, the commercial preparation of CGTase, also bound to Octyl Sepharose under similar conditions at 0.67 M and eluted at 0.55-0.5 M of ammonium sulfate. Octyl Sepharose chromatography can thus be used as a platform approach for purification of CGTases from various bacterial sources. Long stretches of sequence predominated by hydrophobic amino acids are reportedly present in the starch binding domains of CGTases. Starch binding experiments indicated the binding of the enzymes to the octyl matrix through these domains.     

Construction of a chimeric series of Bacillus cyclomaltodextrin glucanotransferases and analysis of the thermal stabilities and pH optima of the enzymes

The cyclomaltodextrin glucanotransferase (CGTase, EC 2.4.1.19) gene from the alkalophilic Bacillus sp. strain no. 17-1 was cloned in Escherichia coli. The cloned CGTase gene consisted of a single open reading frame which would encode a polypeptide of 713 amino acids, and the first 27 amino acid residues comprised a signal peptide. The nucleotide sequence and the amino acid sequence of this CGTase (CGTase 17-1) gene had strong homology with those of the CGTase (CGTase 38-2) gene previously cloned in our laboratory from the alkalophilic Bacillus sp. strain no. 38-2, although the enzymic properties of the CGTase 17-1 were distinct from those of the CGTase 38-2. To analyse those enzymic properties further, we constructed 12 chimeric CGTases using three restriction nuclease sites and compared the enzymic properties of the chimeric CGTases. The N-terminal part of the enzyme was important for heat stability, and the pH-activity profile was influenced by both the N- and the C-terminal parts. A third segment was less important for enzymic properties.     

Structures of maltohexaose and maltoheptaose bound at the donor sites of cyclodextrin glycosyltransferase give insight into the mechanisms of transglycosylation activity and cyclodextrin size specificity

The enzymes from the alpha-amylase family all share a similar alpha-retaining catalytic mechanism but can have different reaction and product specificities. One family member, cyclodextrin glycosyltransferase (CGTase), has an uncommonly high transglycosylation activity and is able to form cyclodextrins. We have determined the 2.0 and 2.5 A X-ray structures of E257A/D229A CGTase in complex with maltoheptaose and maltohexaose. Both sugars are bound at the donor subsites of the active site and the acceptor subsites are empty. These structures mimic a reaction stage in which a covalent enzyme-sugar intermediate awaits binding of an acceptor molecule. Comparison of these structures with CGTase-substrate and CGTase-product complexes reveals three different conformational states for the CGTase active site that are characterized by different orientations of the centrally located residue Tyr 195. In the maltoheptaose and maltohexaose-complexed conformation, CGTase hinders binding of an acceptor sugar at subsite +1, which suggests an induced-fit mechanism that could explain the transglycosylation activity of CGTase. In addition, the maltoheptaose and maltohexaose complexes give insight into the cyclodextrin size specificity of CGTases, since they precede alpha-cyclodextrin (six glucoses) and beta-cyclodextrin (seven glucoses) formation, respectively. Both ligands show conformational differences at specific sugar binding subsites, suggesting that these determine cyclodextrin product size specificity, which is confirmed by site-directed mutagenesis experiments.     

Hydrophobic amino acid residues in the acceptor binding site are main determinants for reaction mechanism and specificity of cyclodextrin-glycosyltransferase

Cyclodextrin-glycosyltransferases (CGTases) (EC ) preferably catalyze transglycosylation reactions with glucosyl residues as acceptor, whereas the homologous alpha-amylases catalyze hydrolysis reactions using water as acceptor. This difference in reaction specificity is most likely caused by the acceptor binding site. To investigate this in detail we altered the acceptor site residues Lys-232, Phe-183, Phe-259, and Glu-264 of Bacillus circulans strain 251 CGTase using site-directed mutagenesis. Lys-232 is of general importance for catalysis, which appears to result mainly from stabilization of the conformation of the loop containing the catalytic nucleophile Asp-229 and His-233, a residue that has been implied in transition state stabilization. Glu-264 contributes to the disproportionation reaction only, where it is involved in initial binding of the (maltose) acceptor. Phe-183 and Phe-259 play important and distinct roles in the transglycosylation reactions catalyzed by CGTase. Mutation of Phe-183 affects especially the cyclization and coupling reactions, whereas Phe-259 is most important for the cyclization and disproportionation reactions. Moreover, the hydrophobisity of Phe-183 and Phe-259 limits the hydrolyzing activity of the enzyme. Hydrolysis can be enhanced by making these residues more polar, which concomitantly results in a lower transglycosylation activity. A double mutant was constructed that yielded an enzyme preferring hydrolysis over cyclization (15:1), whereas the wild type favors cyclization over hydrolysis (90:1).     

In vitro heat effect on functional and conformational changes of cyclodextrin glucanotransferase from hyperthermophilic archaea.

The in vitro heat effect on protein characteristics of thermostable enzyme was examined using a cyclodextrin glucanotransferase (CGTase, EC 2.4.1.19) from the hyperthermophilic archaeon Thermococcus sp. B1001 as a model protein. The recombinant form of CGTase was obtained as an inclusion body from Escherichia coli cells harboring a plasmid which carried the B1001 CGTase gene (cgtA). CGTase was solubilized by 6 M urea, refolded, purified to homogeneity, and heat treated at 80 degrees C for 20 min. Enzyme characteristics were examined compared with those of unheated CGTase. Cyclization activity was increased by in vitro heat treatment, while hydrolysis activity was decreased. The heated and unheated CGTases were analyzed for structures by circular dichroism (CD). The near- and far-UV CD spectra indicated that the structure of unheated CGTase with low cyclization activity was different from that of heated CGTase with high activity. Differential scanning calorimetry of unheated CGTase showed two absorption peaks at 87 and 106 degrees C with increasing temperature. After heat treatment, the minor peak at 87 degrees C disappeared, suggesting that heat-dependent structural conversion occurred in CGTase. These results indicate that the thermal environment plays an important role for the protein folding process of thermostable CGTase.     

HYDROPHOBIC INTERACTION CHROMATOGRAPHY ON OCTYL SEPHAROSE—AN APPROACH FOR ONE-STEP PLATFORM PURIFICATION OF CYCLODEXTRIN GLUCANOTRANSFERASES

Cyclodextrin glucanotransferase (CGTase) from Bacillus circulans ATCC 21783 was concentrated by ultrafiltration and subsequently purified by hydrophobic interaction chromatography on Octyl Sepharose 4 fast flow. The matrix was able to bind selectively to the enzyme at a very low ammonium sulfate concentration of 0.67 M and enzyme desorption was performed by decreasing gradient of the salt. The overall recovery was 80% with 689-fold purity. CGTases derived from four soil isolates and Toruzyme, the commercial preparation of CGTase, also bound to Octyl Sepharose under similar conditions at 0.67 M and eluted at 0.55–0.5 M of ammonium sulfate. Octyl Sepharose chromatography can thus be used as a platform approach for purification of CGTases from various bacterial sources. Long stretches of sequence predominated by hydrophobic amino acids are reportedly present in the starch binding domains of CGTases. Starch binding experiments indicated the binding of the enzymes to the octyl matrix through these domains.     

Immobilization on Eupergit C of cyclodextrin glucosyltransferase (CGTase) and properties of the immobilized biocatalyst

The extreme thermophilic cyclodextrin glucanotransferase (CGTase) from Thermoanaerobacter sp. was covalently attached to Eupergit C. Different immobilization parameters (incubation time, ionic strength, pH, ratio enzyme/support, etc.) were optimized. The maximum yield of bound protein was around 80% (8.1 mg/g support), although the recovery of β-cyclodextrin cyclization activity was not higher than 11%. The catalytic efficiency was lower than 15%. Results were compared with previous studies on covalent immobilization of CGTase.

The enzymatic properties of immobilized CGTase were investigated and compared with those of the soluble enzyme. Soluble and immobilized CGTases showed similar optimum temperature (80–85 °C) and pH (5.5) values, but the pH profile of the immobilized CGTase was broader at higher pH values. The thermoinactivation of the CGTase coupled to Eupergit C was slower than the observed with the native enzyme. The half-life of the immobilized enzyme at 95 °C was five times higher than that of the soluble enzyme. The immobilized CGTase maintained 40% of its initial activity after 10 cycles of 24 h each. After immobilization, the selectivity of CGTase (determined by the ratio CDs/oligosaccharides) was notably shifted towards oligosaccharide production.     

Cloning and nucleotide sequence of a thermostable cyclodextrin glycosyltransferase gene from Thermoanaerobactersp. ATCC 53627 and its expression in Escherichia coli

A gene, cgtA, encoding an extremely thermostable cyclodextrin glycosyltransferase (CGTase) was cloned from a thermophilic anaerobe, Thermoanaerobacter sp. ATCC 53627, and expressed in Escherichia coli. DNA and protein sequencing revealed that the mature enzyme of 683 amino acid residues (MW 75 kDa) was preceded by a signal peptide of 27 amino acid residues. The sequence of the Thermoanaerobacter CGTase was similar to sequences of Bacillus CGTases, with more than 58% identity, and very similar (89% identity) to a CGTase enzyme from Thermoanaerobacterium thermosulfurogenes.