Optimized synthesis of lipase-catalyzed l-ascorbyl laurate by Novozym® 435

l-Ascorbyl laurate is a fatty acid derivative of l-ascorbic acid which can be widely used as a natural antioxidant in both lipid containing food and cosmetic applications. To avoid any possible harmful effects from chemically synthesized product, the enzymatic synthesis appears to be the best way to satisfy the consumer demand for natural antioxidants. The ability of immobilized lipase from Candida antarctica (Novozym^® 435) to catalyze the direct esterification between l-ascorbic acid and lauric acid was investigated. Response surface methodology (RSM) and 5-level-4-factor central composite rotatable design (CCRD) were employed to evaluate the effects of synthesis parameters, such as reaction time (2–10 h), temperature (25–65 °C), enzyme amount (10–50% w/w of l-ascorbic acid), and substrate molar ratio of l-ascorbic acid to lauric acid (1:1–1:5) on percentage molar conversion to l-ascorbyl laurate. Based on the analysis result of ridge max, the optimal enzymatic synthesis conditions were predicted as follows: reaction time 6.7 h, temperature 30.6 °C, enzyme amount 34.5%, substrate molar ratio 1:4.3; and the optimal actual yield was 93.2%.     

Characterization of the lipase immobilized on Mg–Al hydrotalcite for biodiesel

Immobilization of Saccharomyces cerevisiae lipase by physical adsorption on Mg–Al hydrotalcite with a Mg/Al molar ratio of 4.0 led to a markedly improved performance of the enzyme. The immobilized lipase retained activity over wider ranges of temperature and pH than those of the free lipase. The immobilized lipase retained more than 95% relative activity at 50 °C, while the free lipase retained about 88%. The kinetic constants of the immobilized and free lipases were also determined. The apparent activation energies (E_a) of the free and immobilized lipases were estimated to be 6.96 and 2.42 kJ mol^?1, while the apparent inactivation energies (E_d) of free and immobilized lipases were 6.51 and 6.27 kJ mol^?1, respectively. So the stability of the immobilized lipase was higher than that of free lipase. The water content of the oil must be kept below 2.0 wt% and free fatty acid content of the oil must be kept below 3.5 mg KOH g [oil]^?1 in order to get the best conversion. This immobilization method was found to be satisfactory to produce a stable and functioning biocatalyst which could maintain high reactivity for repeating 10 batches with ester conversion above 81.3%.     

Esterification activity and stability of Talaromyces thermophilus lipase immobilized onto chitosan

The Talaromyces thermophilus lipase (TTL) was immobilized by different methods namely adsorption, ionic binding and covalent coupling, using various carriers. Chitosan, pre-treated with glutaraldehyde, was selected as the most suitable support material preserving the catalytic activity almost intact and offering maximum immobilization capacity (76% and 91%, respectively). The chitosan-immobilized lipase could be reputably used for ten cycles with more than 80% of its initial hydrolytic activity. Shift in the optimal temperature from 50 to 60 °C and in the pH from 9.5 to 10, were observed for the immobilized lipase when compared to the free enzyme.The catalytic esterification of oleic acid with 1-butanol has been carried out using hexane as organic solvent. A high performance synthesis of 1-butyl oleate was obtained (95% of conversion yield) at 60 °C with a molar ratio of 1:1 oleic acid to butanol and using 100 U (0.2 g) of immobilized lipase. The esterification product is analysed by GC/MS to confirm the conversion percentage calculated by titration.     

Impressive effect of immobilization conditions on the catalytic activity and enantioselectivity of Candida rugosa lipase toward S-Naproxen production

Candida rugosa lipase (CRL) was immobilized on Amberlite XAD 7 and the advantage of immobilization under the best reaction conditions in achieving high activity and enantioselectivity was shown for the hydrolysis of racemic Naproxen methyl ester. The performance of CRL was found to be better when the enzyme was immobilized at the temperature and pH values where higher conversion and enantioselectivity were obtained. The effects of immobilized lipase load, temperature, pH and substrate concentration on the conversion and enantioselectivity toward S-Naproxen production in aqueous phase/isooctane biphasic batch system were also evaluated. The increase in immobilized lipase load in 320–800 U/mL range increased the conversion of the substrate and enantioselectivity for S-Naproxen. The kinetic resolution of racemic Naproxen methyl ester conducted at the temperatures of 40, 45 and 50 °C and at the pH values of 4, 6, 7.5 and 9 resulted in the highest conversion and enantioselectivity at 45 °C and pH 6. Higher concentration of racemic Naproxen methyl ester than 10 mg/mL decreased both the conversion and enantioselectivity. CRL, which was immobilized at the temperature and pH values where the enzyme was more enantioselective, was successfully used in three successive batch runs each of 180 h. The highest enantiomeric ratio achieved in the S-Naproxen production was 174.2 with the conversion of 49%.     

Dietary phenolic acids and ascorbic acid: Influence on acid-catalyzed nitrosative chemistry in the presence and absence of lipids

Acid-catalyzed nitrosation and production of potentially carcinogenic nitrosative species is focused at the gastroesophageal junction, where salivary nitrite, derived from dietary nitrate, encounters the gastric juice. Ascorbic acid provides protection by converting nitrosative species to nitric oxide (NO). However, NO may diffuse into adjacent lipid, where it reacts with O₂ to re-form nitrosative species and N-nitrosocompounds (NOC). In this way, ascorbic acid promotes acid nitrosation. Using a novel benchtop model representing the gastroesophageal junction, this study aimed to clarify the action of a range of water-soluble antioxidants on the nitrosative mechanisms in the presence or absence of lipids. Caffeic, ferulic, gallic, or chlorogenic and ascorbic acids were added individually to simulated gastric juice containing secondary amines, with or without lipid. NO and O₂ levels were monitored by electrochemical detection. NOC were measured in both aqueous and lipid phases by gas chromatography–tandem mass spectrometry. In the absence of lipids, all antioxidants tested inhibited nitrosation, ranging from 35.9 ± 7.4% with gallic acid to 93 ± 0.6% with ferulic acid. In the presence of lipids, the impact of each antioxidant on nitrosation was inversely correlated with the levels of NO they generated (R² = 0.95, p < 0.01): gallic, chlorogenic, and ascorbic acid promoted nitrosation, whereas ferulic and caffeic acids markedly inhibited nitrosation.     

Chemistry,antioxidant and antimicrobial potential of nutmeg (Myristica fragrans Houtt)

Antioxidant and antimicrobial activities of nutmeg (Myristica fragrans Houtt) seed extracts were evaluated. Seeds were extracted with acetone, ethanol, methanol, butanol and water. All the extracts have shown significant antioxidant and antimicrobial activities against the tested microorganisms. Among all extracts, acetone extract has shown the highest antioxidant activity. The acetone extract showed 93.12 ± 1.48 mg gallic acid equivalents (GAE)/100 g dry weight total phenolic content, DPPH scavenging activity of 63.04 ± 1.56%, chelating activity of 64.11 ± 2.21% and 74.36 ± 1.94% inhibition of β-carotene bleaching, at 1 mg/mL extract concentration. Out of all extracts, acetone extract was able to exert antimicrobial activity against all tested bacteria and fungi. Acetone extract has shown the strongest antibacterial and antifungal activity with Staphylococcus aureus (13.8 ± 0.42 mm) and Aspergillus niger (14.4 ± 0.37 mm), respectively. GC–MS analysis of acetone extract has revealed the presence of 32 compounds of extract representing 99.49%. Sabinene (28.61%) has shown the highest occurrence in the extract. β-Pinene (10.26), α-pinene (9.72), myristicin (4.30%), isoeugenol (2.72%), p-cymene (1.81%), carvacrol (1.54%), eugenol (0.89%) and β-caryophellene (0.82%) were reported as possible contributor for antioxidant and antimicrobial activity of nutmeg.     

Isolation and characterization of ellagitannins as the major polyphenolic components of Longan (Dimocarpus longan Lour) seeds

Longan (Dimocarpus longan Lour, syn. Euphoria longan Lam.) represents an important fruit in Northern Thailand and has significant economic impact. The fruit is either consumed fresh or as commercially prepared dried and canned products. The canning industry in Thailand produces considerable quantities of waste products, in particular Longan seeds. Because these seeds may be an exploitable source of natural phenolic antioxidants, it was of interest to identify, purify and quantitate the major potential antioxidant phenolics contained therein. The polyphenolic fraction from ground Longan seeds was obtained by extraction with methanol after delipidation with hexane. The hexane extract contained predominantly long-chain fatty acids with major contributions from palmitic (35%) and oleic (28%) acids. The polyphenolic fraction (80.90 g/kg dry weight) was dominated by ellagic acid (25.84 g/kg) and the known ellagitannins corilagin (13.31 g/kg), chebulagic acid (13.06 g/kg), ellagic acid 4-O-α-l-arabinofuranoside (9.93 g/kg), isomallotinic acid (8.56 g/kg) and geraniin (5.79 g/kg). Structure elucidation was performed with mass spectrometry and complete assignment of ¹H and ¹³C NMR signals. The methanol extracts exhibited strong antioxidant capacities with an IC₅₀ of 154 μg/ml for reactive oxygen species attack on salicylic acid and 78 μg/ml for inhibition of xanthine oxidase in the hypoxanthine/xanthine oxidase assay. The extracts were less effective in the 2-deoxyguanosine assay (IC₅₀ = 2.46 mg/ml), indicating that gallates along with ellagic acid and its congeners exert their potential antioxidant effects predominantly by precipitation of proteins such as xanthine oxidase. This was confirmed for the pure compounds gallic acid, methyl gallate, ellagic acid and corilagin.     

Immobilization of lipase in organic solvent in the presence of fatty acid additives

In this study porcine pancreatic lipase (PPL) was covalently immobilized on cross-linked polyvinyl alcohol (PVA) in organic media in the presence of fatty acid additives in order to improve its immobilized activity. The effects of fatty acid additions to the immobilization media were investigated choosing tributyrin hydrolysis in water and ester synthesis by immobilized PPL in n-hexane. Various fatty acids which are also the substrates of lipases in esterification reactions were used as active site protecting agents during the immobilization process in an organic solvent. The obtained results showed that covalent immobilization carried out in the presence of fatty acids as protective ligands improved the hydrolytic and esterification activity of immobilized enzyme. A remarkable increase in activity of the immobilized PPL was obtained when octanoic acid was used as an additive and the hydrolytic activity was increased from 5.2 to 19.2 μmol min⁻¹ mg⁻¹ as compared to the non-additive immobilization method. With the increase of hydrolytic activity of immobilized lipase in the presence of octanoic acid, in an analogous manner, the rate of esterification for the synthesis of butyl octanoate was also increased from 7.3 to 26.3 μmol min⁻¹ g⁻¹ immobilized protein using controlled thermodynamic water activities with saturated salt solutions. In addition, the immobilized PPL activity was maintained at levels representing 63% of its original activity value after 5 repeated uses. The proposed method could be adopted for a wide variety of other enzymes which have highly soluble substrates in organic solvent such as other lipases and esterases.     

Optimization of medium chain length fatty acid incorporation into olive oil catalyzed by immobilized Lip2 from Yarrowia lipolytica

Triacylglycerols (TAG) enriched with medium chain fatty acids (M) present specific nutritional, energetic and pharmaceutical properties. Structured lipids (SL) were produced by acidolysis between virgin olive oil and caprylic (C8:0) or capric (C10:0) acids in solvent-free media, catalyzed by the main extracellular lipase from Yarrowia lipolytica lipase 2 (YLL2), immobilized in Accurel MP 1000. Response surface methodology was used for modeling and optimization of the reaction conditions catalyzed by immobilized YLL2. Central composite rotatable designs were performed as a function of the reaction time (2.5–49.5 h) and the molar ratio of medium chain fatty acid/TAG (MR; 0.6–7.4), for both acids, and also of temperature (32–48 ̊C) for C8:0 experiments. As for capric acid, the incorporation of caprylic acid in olive oil showed not to depend of the temperature, within the tested range. The response surfaces, fitted to the experimental data, were described by a first-order polynomial equation, for C8:0 incorporation, and by a second-order polynomial equation for C10:0 incorporation. Under optimized conditions (48 h reaction at 40 ̊C, with a molar ratio of 2:1 M/TAG) the highest incorporation was reached for C8:0 (25.6 mol%) and C10:0 (21.3 mol%).     

GC/MS and LC/MS analysis,and antioxidant and antimicrobial activities of various solvent extracts from Mirabilis jalapa tubers

The antioxidant and antimicrobial activities of various solvent extracts from Mirabilis jalapa tubers (MJT) were investigated using various in vitro assays. The total phenolic and flavonoid contents varied from 21.45 to 364.6 mg gallic acid equivalent (GAE)/g dried extract and 5.2 to 71.6 mg quercetin/g dried extract, respectively. Water extract of MJT was the most potent antioxidant in all assays used, followed by methanol extract. The five solvent extracts were screened for antibacterial and antifungal activities. Water extract was the most effective with minimum inhibitory concentration <200 μg/ml against Staphylococcus aureus, Micrococcus luteus, Pseudomonas aeruginosa, Klebsiella pneumoniae, Bacillus cereus and Enterococcus faecalis. Only water extract showed antifungal activity against Aspergillus niger, Fusarium solani, Fusarium oxysporium and Fusarium granularium. GC/MS analysis of MJT dichloromethane and methanol extracts showed that oleic acid and β-sitosterol were, respectively, the major compounds. LC/MS analysis of the aqueous extract showed a high content of flavanol and flavonol compounds. Phenolic acids such as ferulic and caffeic acid were also detected.To our knowledge, this is the first report on the chemical composition, and antioxidant and antimicrobial activities of phenolic extracts from M. jalapa tubers (MJT). The results of the present work indicate that MJT extracts could be used as natural antioxidant and antimicrobial agents in the food preservation and human health.     

A robust whole-cell biocatalyst that introduces a thermo- and solvent-tolerant lipase into Aspergillus oryzae cells: Characterization and application to enzymatic biodiesel production

To develop a robust whole-cell biocatalyst that works well at moderately high temperature (40–50 °C) with organic solvents, a thermostable lipase from Geobacillus thermocatenulatus (BTL2) was introduced into an Aspergillus oryzae whole-cell biocatalyst. The lipase-hydrolytic activity of the immobilized A. oryzae (r-BTL) was highest at 50 °C and was maintained even after an incubation of 24-h at 60 °C. In addition, r-BTL was highly tolerant to 30% (v/v) organic solvents (dimethyl carbonate, ethanol, methanol, 2-propanol or acetone). The attractive characteristics of r-BTL also worked efficiently on palm oil methanolysis, resulting in a nearly 100% conversion at elevated temperature from 40 to 50 °C. Moreover, r-BTL catalyzed methanolysis at a high methanol concentration without a significant loss of lipase activity. In particular, when 2 molar equivalents of methanol were added 2 times, a methyl ester content of more than 90% was achieved; the yield was higher than those of conventional whole-cell biocatalyst and commercial Candida antarctica lipase (Novozym 435). On the basis of the results regarding the excellent lipase characteristics and efficient biodiesel production, the developed whole-cell biocatalyst would be a promising biocatalyst in a broad range of applications including biodiesel production.     

Enzymatic hydrolysis of racemic ibuprofen esters using Rhizomucor miehei lipase immobilized on different supports

This research describes the immobilization of Rhizomucor miehei lipase (RML) and chemically aminated RML (NH₂-RML) on different supports including octyl-sepharose (octyl-RML), activated sepharose with cyanogen bromide (CNBr-RML and CNBr-NH₂-RML), glyoxyl sepharose (Gx-RML and Gx-NH₂-RML) and glyoxyl sepharose dithiothreitol (Gx-DTT-RML and Gx-DTT-NH₂-RML). The highest immobilization yield was achieved for octyl-RML (>98%) followed by CNBr-RML (88%). Octyl-RML had the most specific activity (13.6) among all derivatives. The other preparations had moderate activities likely because of chemical reaction during covalent attachment of the enzyme. The catalytic behavior of lipase immobilized in hydrolysis reactions was investigated using methyl, ethyl, propyl, butyl and isobutyl-ibuprofen esters and the influence of the alkyl chain and the alcoholic residue of the ester were studied. Butyl ester was the most interesting ester for carrying out hydrolysis. The highest enantioselectivity of enzyme (E = 8.8) was obtained with isooctane/sodium phosphate buffer pH 7.0 at temperature of 40 °C. Increasing temperature from 40 to 50 °C caused decreasing in enantioselectivities and conversions. Also esterification of ibuprofen was carried out in solvent systems containing isooctane and two ionic liquids (ILs); [BMIM][PF₆] and [BMIM][BF₄]. Poor conversions and enantioselectivities were observed during esterification in all solvents.     

Synthesis of geranyl acetate in non-aqueous media using immobilized Pseudomonas cepacia lipase on biodegradable polymer film: Kinetic modelling and chain length effect study

Pseudomonas cepacia lipase (PCL) was immobilized on ternary blend biodegradable polymer made up of polylactic acid (PLA), chitosan (CH), and polyvinyl alcohol (PVA). Immobilized biocatalyst was characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), % water content, protein and lipase activity assay. The lipase activity assay showed enhanced activity of immobilized lipase than crude lipase. Higher half life time (t_1/2) and lower deactivation rate constant (K_d) was found for the n-hexane among various tested solvent. Influence of various reaction parameters on enzyme activity were studied in detail. When geraniol (1 mmol) and vinyl acetate (4 mmol) in toluene (3 mL) were reacted with 50 mg immobilized lipase at 55 °C; then 99% geraniol was converted to geranyl acetate after 3 h. Various kinetic parameters such as r_max, K_i(A), K_m(A), K_m(B) were determined using non-linear regression analysis for ternary-complex and Bi–Bi ping-pong mechanism. The kinetic study showed that reaction followed ternary-complex mechanism with inhibition by geraniol. Activation energy (Ea) was found to be lower for immobilized lipase (13.76 kCal/mol) than crude lipase (19.9 kCal/mol) indicating better catalytic efficiency of immobilized lipase. Immobilized biocatalyst demonstrated 4 fold increased catalytic activity than crude lipase and recycled five times.     

Improving the activity and stability of Yarrowia lipolytica lipase Lip2 by immobilization on polyethyleneimine-coated polyurethane foam

In this study, polyurethane foam (PUF) was used for immobilization of Yarrowia lipolytica lipase Lip2 via polyethyleneimine (PEI) coating and glutaraldehyde (GA) coupling. The activity of immobilized lipases was found to depend upon the size of the PEI polymers and the way of GA treatment, with best results obtained for covalent-bind enzyme on glutaraldehyde activated PEI-PUF (MW 70,000 Da), which was 1.7 time greater activity compared to the same enzyme immobilized without PEI and GA. Kinetic analysis shows the hydrolytic activity of both free and immobilized lipases on triolein substrate can be described by Michaelis–Menten model. The K_m for the immobilized and free lipases on PEI-coated PUF was 58.9 and 9.73 mM, respectively. The V_max values of free and immobilized enzymes on PEI-coated PUF were calculated as 102 and 48.6 U/mg enzyme, respectively. Thermal stability for the immobilization preparations was enhanced compared with that for free preparations. At 50 °C, the free enzyme lost most of its initial activity after a 30 min of heat treatment, while the immobilized enzymes showed significant resistance to thermal inactivation (retaining about 70% of its initial activity). Finally, the immobilized lipase was used for the production of lauryl laurate in hexane medium. Lipase immobilization on the PEI support exhibited a significantly improved operational stability in esterification system. After re-use in 30 successive batches, a high ester yield (88%) was maintained. These results indicate that PEI, a polymeric bed, could not only bridge support and immobilized enzymes but also create a favorable micro-environment for lipase. This study provides a simple, efficient protocol for the immobilization of Y. lipolytica lipase Lip2 using PUF as a cheap and effective material.     

Effects of alkyl chain length of gallates on their antifungal property and potency as an environmentally benign preservative against wood-decay fungi

This study investigated effects of alkyl chain length of eight aliphatic gallates from C₁ to C₁₈ on their antifungal activity and free radical scavenging activity, which are two important indicators in developing wood preservatives. Results from the agar plate test showed that the antifungal activity against wood-rot fungi of gallates was related to alkyl chain length. It increased with increasing alkyl chain length, reaching a maximum at octyl gallate (C₈), and then decreased as chain length increased. Octyl gallate also exhibited potential antifungal activity against soft-rot Chaetomium globosum and copper-tolerant fungi Wolfiporia extensa and Poria placenta, which are difficult to combat with current copper-based wood preservatives. Octyl gallate is a potent antifungal agent with excellent antifungal activity over a broad antifungal spectrum. All of the gallates tested, regardless of their alkyl chain length, showed strong scavenging activity on the DPPH radical with EC₅₀ values around 1–5 μg ml^?1, indicating that the alkyl chain length was not directly related to this activity. Results from the soil block test showed that excellent antioxidants such as propyl gallate (C₃) and octyl gallate impart wood with good resistance against wood-decay fungi. This suggests that antioxidants have potential as environmentally benign wood preservatives.     

Ethyl isovalerate synthesis using Candida rugosa lipase immobilized on silica nanoparticles prepared in nonionic reverse micelles

Uniform and monodispersed silica nanoparticles were synthesized with a mean diameter of 100 ± 20 nm as analyzed by Transmission Electron Microscopy (TEM). Glutaraldehyde was used as a coupling agent for efficient binding of the lipase onto the silica nanoparticles. For the hydrolysis of pNPP at pH 7.2, the activation energy within 25–40 °C for free and immobilized lipase was 7.8 and 1.25 KJ/mol, respectively. The V_max and K_m of immobilized lipase at 25 °C for pNPP hydrolysis were found to be 212 μmol/min/mg and 0.3 mM, whereas those for free lipase were 26.17 μmol/min and 1.427 mM, respectively. The lower activation energy of immobilized lipase in comparison to free lipase suggests a change in conformation of the enzyme leading to a requirement for lower energy on the surface of the nanoparticles. A better yield (7 fold higher) of ethyl isovalerate was observed using lipase immobilized onto silica nanoparticles in comparison to free lipase.     

The study on effective immobilization of lipase on functionalized bentonites and their properties

Three different functionalized bentonites including acid activated bentonite (B_a), organically modified bentonite with cetyltrimethyl ammonium bromide (B_CTMAB) and the composite by acid activation and organo-modification (B_a-CTMAB) were prepared, and used for immobilization of lipase from bovine pancreatic lipase by adsorption. The amount of lipase adsorbed on the functionalized bentonites was in the following sequence: B_a > B_CTMAB > B_a-CTMAB, showing the strongest affinity of B_a for lipase among the three supports. However, the immobilized lipase on B_a-CTMAB showed the highest activity in the hydrolysis of olive oil by 1.67 times of activity of free lipase due to the hydrophobically interfacial activation and enlarged catalytic interface. While, the activity of immobilized lipase on B_a was lower than 20% of free lipase’s activity due to the absence of hydrophobic activation and negative impact of excessive hydrogen ions on the surface. The K_m values for the immobilized lipase on B_a-CTMAB (0.054 g/mL) and B_CTMAB (0.074 g/mL) were both lower than that of free lipase (0.115 g/mL), and the V_max values were higher for the immobilized lipases, exhibiting a higher affinity of the immobilized lipase toward olive oil than free lipase. In comparison to free lipase, the better resistance to heating inactivation, storage stability and reusability of the immobilized lipases on B_a-CTMAB and B_CTMAB were also obtained. The results show that the efficient and stable biocatalysts for industrial application can be prepared by using the low-cost bentonite mineral as the supports.     

Enzymatic synthesis of fatty acid methyl esters from lard with immobilized Candida sp. 99-125

In this paper, immobilized lipase catalyzed biodiesel production from lard was studied. Using Candida sp. 99-125, the effect of temperature, water content, enzyme amount, solvent and three-step methanolysis were investigated. The optimal conditions for processing 1 g of lard were: 0.2 g immobilized lipase, 8 ml n-hexane as solvent, 20% water based on the fat weight, temperature 40 °C, and three-step addition of methanol. As a result, the fatty acid methyl esters (FAMEs) yield was 87.4%. The lipase was proved to be stable when used repeatedly for 180 h.     

Lipase immobilized microstructured fiber based flow-through microreactor for facile lipid transformations

A facile continuous flow-through Candida antarctica lipase B immobilized silica microstructured optical fiber (SMOF) microreactor for application in lipid transformations has been demonstrated herewith. The lipase was immobilized on the amino activated silica fiber using glutaraldehyde as a bifunctional reagent. The immobilized lipase activity in the SMOF was tested calorimetrically by determination of p-nitrophenyl butyrate hydrolysis products. The specific activity of the immobilized lipase was calculated to be 0.91 U/mg. The SMOF microreactor performance was evaluated by using it as a platform for synthesis of butyl laurate from lauric acid and n-butanol in n-hexane and n-heptane at 50 °C, with products identified by gas chromatography–mass spectrometry (GC–MS). Different substrate mole ratios were evaluated, with 1:3, lauric acid:n-butanol showing best performance. Remarkably, percentage yields of up to 99% were realized with less than ∼38 s microreactor residence time. In addition, the SMOF microreactor could be reused many times (at least 7 runs) with minimal reduction in the activity of the enzyme. The enzyme stability did not change even with storage of the microreactor in ambient conditions over one month.