Kinetics study of pyridine biodegradation by a novel bacterial strain,Rhizobium sp. NJUST18

Biodegradation of pyridine by a novel bacterial strain, Rhizobium sp. NJUST18, was studied in batch experiments over a wide concentration range (from 100 to 1,000 mg l^?1). Pyridine inhibited both growth of Rhizobium sp. NJUST18 and biodegradation of pyridine. The Haldane model could be fitted to the growth kinetics data well with the kinetic constants μ* = 0.1473 h^?1, K _s = 793.97 mg l^?1, K _i = 268.60 mg l^?1 and S _m = 461.80 mg l^?1. The true μ _max, calculated from μ*, was found to be 0.0332 h^?1. Yield coefficient Y _X/S depended on S _i and reached a maximum of 0.51 g g^?1 at S _i of 600 mg l^?1. V _max was calculated by fitting the pyridine consumption data with the Gompertz model. V _max increased with initial pyridine concentration up to 14.809 mg l^?1 h^?1. The q _S values, calculated from $V_{ \hbox{max} }$ , were fitted with the Haldane equation, yielding q _Smax = 0.1212 g g^?1 h^?1 and q* = 0.3874 g g^?1 h^?1 at S _m′ = 507.83 mg l^?1, K _s′ = 558.03 mg l^?1, and K _i′ = 462.15 mg l^?1. Inhibition constants for growth and degradation rate value were in the same range. Compared with other pyridine degraders, μ _max and S _m obtained for Rhizobium sp. NJUST18 were relatively high. High K _i and K _i′ values and extremely high K _s and K _s′ values indicated that NJUST18 was able to grow on pyridine within a wide concentration range, especially at relatively high concentrations.     

Optimization of production of caffeine demethylase by <Emphasis Type="Italic">Pseudomonas</Emphasis> sp. in a bioreactor

The effect of pH, aeration rate, and agitation rate on specific productivity of caffeine demethylase from Pseudomonas sp. was studied in a bioreactor. Maximum specific productivity of caffeine demethylase of 2,214 U g cell dry weight⁻¹ h⁻¹ was obtained at 0.27 vvm, 700 rpm, and pH 7.0. Under these conditions, volumetric oxygen transfer coefficient was 74.2 h⁻¹, indicating that caffeine demethylase production by Pseudomonas sp. was highly oxygen-dependent. Different metabolite formation at different agitation and aeration rates can be used as a strategy for recovery of pharmaceutically important metabolites from caffeine by manipulation of conditions in a bacterial culture. This is the first report on production of high levels of caffeine demethylase in bioreactors.     

Construction of lactose-consuming Saccharomyces cerevisiae for lactose fermentation into ethanol fuel

Two lactose-consuming diploid Saccharomyces cerevisiae strains, AY-51024A and AY-51024M, were constructed by expressing the LAC4 and LAC12 genes of Kluyveromyces marxianus in the host strain AY-5. In AY-51024A, both genes were targeted to the ATH1 and NTH1 gene-encoding regions to abolish the activity of acid/neutral trehalase. In AY-51024M, both genes were respectively integrated into the MIG1 and NTH1 gene-encoding regions to relieve glucose repression. Physiologic studies of the two transformants under anaerobic cultivations in glucose and galactose media indicated that the expression of both LAC genes did not physiologically burden the cells, except for AY-51024A in glucose medium. Galactose consumption was initiated at higher glucose concentrations in the MIG1 deletion strain AY-51024M than in the corresponding wild-type strain and AY-51024A, wherein galactose was consumed until glucose was completely depleted in the mixture. In lactose medium, the Sp. growth rates of AY-51024A and AY-51024M under anaerobic shake-flasks were 0.025 and 0.067 h^?1, respectively. The specific lactose uptake rate and ethanol production of AY-51024M were 2.50 g lactose g CDW^?1 h^?1 and 23.4 g l^?1, respectively, whereas those of AY-51024A were 0.98 g lactose g CDW^?1 h^?1 and 24.3 g lactose g CDW^?1 h^?1, respectively. In concentrated cheese whey powder solutions, AY-51024M produced 63.3 g l^?1 ethanol from approximately 150 g l^?1 initial lactose in 120 h, conversely, AY-51024A consumed 63.7 % of the initial lactose and produced 35.9 g l^?1 ethanol. Therefore, relieving glucose repression is an effective strategy for constructing lactose-consuming S. cerevisiae.     

Microbial production of 2,3-butanediol by a newly-isolated strain of Serratia marcescens

A newly-isolated strain of Serratia marcescens, G12, was characterized for 2,3-butanediol (2,3-BD) production. In shake-flask and batch fermentations, 2,3-BD reached 48.5 and 51 g l^?1, respectively. Low amounts of (~8 g l^?1) of acetoin were also formed. In fed-batch fermentations, strain G12 produced 72.8 g 2,3-BD l^?1 with glucose initially at 130 g l^?1. When aeration rate was increased to 2.5 vvm for the fermentation process, 2,3-BD reached 87.8 g l^?1 and the highest productivity was 1.6 g l^?1 h^?1. Acetoin was at 6.2 g l^?1. G12 therefore may be a suitable candidate strain for large-scale production of 2,3-BD.     

Increased production of γ-lactones from hydroxy fatty acids by whole Waltomyces lipofer cells induced with oleic acid

Among several fatty acids tested, oleic acid was selected as the most efficient inducer for the production of 4-hydroxydodecanoic acid, a metabolite of β-oxidation, by Waltomyces lipofer. Cells were induced by incubation for 12 h in a medium containing 10 g l^?1 yeast extract, 10 g l^?1 peptone, 5 g l^?1 oleic acid, 1 g l^?1 glucose, and 0.05 % (w/v) Tween 80. The optimal reaction conditions for the production of γ-lactones by induced cells were pH 6.5, 35 °C, 200 rpm, 0.71 M Tris, 60 g l^?1 hydroxy fatty acid, and 20 g l^?1 cells. Non-induced cells produced 38 g l^?1 γ-dodecalactone from 60 g l^?1 10-hydroxystearic acid after 30 h, with a conversion yield of 63 % (w/w) and a productivity of 1.3 g l^?1 h^?1 under the optimized conditions, whereas induced cells produced 51 g l^?1 γ-dodecalactone from 60 g l^?1 10-hydroxystearic acid after 30 h, with a conversion yield of 85 % (w/w) and a productivity of 1.7 g l^?1 h^?1. The conversion yield and productivity of induced cells were 22 % and 1.3-fold higher, respectively, than those of non-induced cells. Induced cells also produced 28 g l^?1 γ-decalactone and 12 g l^?1 γ-butyrolactone from 60 g l^?1 12-hydroxystearic acid and 60 g l^?1 10-hydroxydecanoic acid, respectively, after 30 h. The concentration, conversion yield, and productivity of γ-dodecalactone and γ-decalactone are the highest reported thus far. This is the first study on the biotechnological production of γ-butyrolactone.     

Microbial lipid production: screening with yeasts grown on Brazilian molasses

Rhodotorula glutinis CCT 2182, Rhodosporidium toruloides CCT 0783, Rhodotorula minuta CCT 1751 and Lipomyces starkeyi DSM 70296 were evaluated for the conversion of sugars from Brazilian molasses into single-cell oil (SCO) feedstock for biodiesel. Pulsed fed-batch fermentations were performed in 1.65 l working volume bioreactors. The maximum specific growth rate (µ_max), lipid productivity (Pr) and cellular lipid content were, respectively, 0.23 h^?1, 0.41 g l^?1 h^?1, and 41 % for Rsp. toruloides; 0.20 h^?1, 0.27 g l^?1 h^?1, and 36 % for Rta. glutinis; 0.115 h^?1, 0.135 g l^?1 h^?1, and 27 % for Rta. minuta; and 0.11 h^?1, 0.13 g l^?1 h^?1, and 32 % for L. starkeyi. Based on their microbial lipid productivity, content, and profile, Rsp. toruloides and Rta. glutinis are promising candidates for biodiesel production from Brazilian molasses. All the oils from the yeasts were similar to the composition of plant oils (rapeseed and soybean) and could be used as raw material for biofuels, as well as in food and nutraceutical products.     

Effect of controlled oxygen limitation on Candida shehatae physiology for ethanol production from xylose and glucose

Carbon distribution and kinetics of Candida shehatae were studied in fed-batch fermentation with xylose or glucose (separately) as the carbon source in mineral medium. The fermentations were carried out in two phases, an aerobic phase dedicated to growth followed by an oxygen limitation phase dedicated to ethanol production. Oxygen limitation was quantified with an average specific oxygen uptake rate (OUR) varying between 0.30 and 2.48 mmolO₂ g dry cell weight (DCW)^?1 h^?1, the maximum value before the aerobic shift. The relations among respiration, growth, ethanol production and polyol production were investigated. It appeared that ethanol was produced to provide energy, and polyols (arabitol, ribitol, glycerol and xylitol) were produced to reoxidize NADH from assimilatory reactions and from the co-factor imbalance of the two-first enzymatic steps of xylose uptake. Hence, to manage carbon flux to ethanol production, oxygen limitation was a major controlled parameter; an oxygen limitation corresponding to an average specific OUR of 1.19 mmolO₂ g DCW^?1 h^?1 allowed maximization of the ethanol yield over xylose (0.327 g g^?1), the average productivity (2.2 g l^?1 h^?1) and the ethanol final titer (48.81 g l^?1). For glucose fermentation, the ethanol yield over glucose was the highest (0.411 g g^?1) when the specific OUR was low, corresponding to an average specific OUR of 0.30 mmolO₂ g DCW^?1 h^?1, whereas the average ethanol productivity and ethanol final titer reached the maximum values of 1.81 g l^?1 h^?1 and 54.19 g l^?1 when the specific OUR was the highest.     

Evaluation of ethanol production by a new isolate of yeast during fermentation in synthetic medium and sugarcane bagasse hemicellulosic hydrolysate

A new xylose fermenting yeast was isolated from over-ripe banana by enrichment in xylose-containing medium. The phylogenetic analysis of ITS1-5.8S-ITS2 region sequences of ribosomal RNA of isolate BY2 revealed that it shows affiliation to genus Pichia and clades with Pichia caribbica. In batch fermentation, Pichia strain BY2 fermented xylose, producing 15 g l^?1 ethanol from 30 g l^?1 xylose under shaking conditions at 28°C, with ethanol yield of 0.5 g g^?1 and volumetric productivity of 0.31 g l^?1 h^?1. The optimum pH range for ethanol production from xylose by Pichia strain BY2 was 5–7. Pichia strain BY2 also produced 6.08 g l^?1 ethanol from 30 g l^?1 arabinose. Pichia strain BY2 can utilize sugarcane bagasse hemicellulose acid hydrolysate for alcohol production, efficiency of fermentation was improved by neutralization, and sequential use of activated charcoal adsorption method. Percent total sugar utilized and ethanol yield for the untreated hydrolysate was 17.14% w/v and 0.33 g g^?1, respectively, compared with 66.79% w/v and 0.45 g g^?1, respectively, for treated hemicellulose acid hydrolysate. This new yeast isolate showed ethanol yield of 0.45 g g^?1 and volumetric productivity of 0.33 g l^?1 h^?1 from sugarcane bagasse hemicellulose hydrolysate detoxified by neutralization and activated charcoal treatment, and has potential application in practical process of ethanol production from lignocellulosic hydrolysate.     

Effect of sugar concentration on ginsenoside biosynthesis in hairy root cultures of Panax quinquefolium cultivated in shake flasks and nutrient sprinkle bioreactor

The study assessed the influence of sugar concentration (10, 20, 30, 50, 70, 100, 120 g l^?1) on growth and ginsenoside biosynthesis in Panax quinquefolium hairy roots cultivated in shake flasks and a nutrient sprinkle bioreactor. The highest growth rate was achieved in medium containing 3–5 % sucrose. More than 70 g l^?1 or less than 20 g l^?1 sugar content in the medium induces significant inhibition of root growth when cultivated in shake flasks. The saponin content was determined using HPLC. The maximum yield (above 9 mg g^?1 d.w.) of the sum of six examined ginsenosides (Rb₁, Rb₂, Rc, Rd, Re and Rg₁) in hairy roots cultivated in shake flasks was obtained with 30 g l^?1 sucrose in the medium. The sucrose concentration in the medium was found to correlate with saponin content in bioreactor-cultured specimens. A higher level of protopanaxadiol derivatives was found for lower (20 and 30 g l^?1) sucrose concentrations; higher sucrose concentrations (50 and 70 g l^?1) in the medium stimulated a higher level of Rg group saponins.     

Kinetics of the aerobic co-metabolism of 1,1-dichloroethylene by Achromobacter sp.: a novel benzene-grown culture

Batch experiments were performed for the aerobic co-metabolism of 1,1-dichloroethylene (1,1-DCE) by Achromobacter sp., identified by gene sequencing of 16S rRNA and grown on benzene. Kinetic models were employed to simulate the co-metabolic degradation of 1,1-DCE, and relevant parameters were obtained by non-linear least squares regression. Benzene at 90 mg L^?1 non-competitively inhibited degradation of 1,1-DCE (from 125 to 1,200 μg L^?1). The maximum specific utilization (k_c) rate and the half-saturation constant (K_c) for 1,1-DCE were 54 ± 0.85 μg h^?1 and 220 ± 6.8 μg L^?1, respectively; the k_b and K_b for benzene were 13 ± 0.18 mg h^?1 and 28 ± 0.42 mg L^?1, respectively. This study provides a theoretical basis to predict the natural attenuation when benzene and 1,1-DCE occur as co-contaminants.     

Micropropagation of Cymbidium sinense using continuous and temporary airlift bioreactor systems

Airlift bioreactors were programmed for continuous and temporary immersion culture to investigate factors that affect the rhizome proliferation, shoot formation, and plantlet regeneration of Cymbidium sinense. During rhizome proliferation, the continuous immersion bioreactor system was used to explore the effects of activated charcoal (AC) in the culture medium, inoculation density, and air volume on rhizome differentiation and growth. The optimum conditions for obtaining massive health rhizomes were 0.3 g l^?1 AC in the culture medium, 7.5 g l^?1 inoculation density, and 150 ml min^?1 air. In addition, the temporary immersion bioreactor system was used for both shoot formation and plantlet regeneration. Supplementing 4 mg l^?1 6-benzylaminopurine and 0.2 mg l^?1 naphthalene acetic acid (NAA) to the culture medium promoted shoot induction from the rhizome. Cutting the rhizome explants into 1 cm segments was better for massive shoot formation than cutting into 0.25 and 0.5 cm explant segments. NAA promoted plantlet regeneration and the rooting rate (94.7 %), with whole plantlets growing well in culture medium containing 1.0 mg l^?1 NAA. Therefore, applying bioreactors in C. sinense micropropagation is an efficient way for scaling up the production of propagules and whole plantlets for the industrial production of high-quality seedlings.     

Influence of the concentrations of d-xylose and yeast extract on ethanol production by Pachysolen tannophilus

To determine the most favorable conditions for the production of ethanol by Pachysolen tannophilus, this yeast was grown in batch cultures with various initial concentrations of two of the constituents of the culture medium: d-xylose (s_o), ranging from 1 g·l⁻¹ to 200 g·l⁻¹, and yeast extract (l_o), ranging from 0 g·l⁻¹ to 8 g·l⁻¹. The most favorable conditions proved to be initial concentrations of S_o=25 g·l⁻¹ and l_o=4 g·l⁻¹, which gave a maximum specific growth rate of 0.26 h⁻¹, biomass productivity of 0.023 g·l⁻¹·h⁻¹, overall biomass yield of 0.094 g·g⁻¹, specific xylose-uptake rate (q_s) of 0.3 g·g⁻¹·h⁻¹ (for t=50 h), specific ethanol-production rate (q_E) of 0.065 g·g⁻¹·h⁻¹ and overall ethanol yield of 0.34 g·g⁻¹; q_s values decreased after the exponential growth phase while q_E remained practically constant.     

Production of ginsenosides Rg1 and Rh1 by hydrolyzing the outer glycoside at the C-6 position in protopanaxatriol-type ginsenosides using β-glucosidase from Pyrococcus furiosus

The specific activity of a recombinant β-glucosidase from Pyrococcus furiosus for protopanaxatriol (PPT)-type ginsenosides followed the order Rf > R₁ > Re > R₂ > Rg₂, which were converted to Rh₁, Rg₁, Rg₁, Rh₁, and Rh₁, respectively. No activity was observed with Rg₁ and Rh₁. Thus, P. furiosus β-glucosidase hydrolyzed the outer glycoside at the C-6 position in PPT-type ginsenosides whereas the enzyme did not hydrolyze the inner glucoside at the C-6 position and the glucoside at the C-20 position. The activity for Rf was optimal at 95 °C, pH 5.5, 5 mM ginsenoside, and 32 U enzyme l^?1. Under these conditions, P. furiosus β-glucosidase completely converted from R₁ to Rg₁ after 10 h, with a productivity of 0.4 g l^?1 h^?1 and completely converted Rf to Rh₁ after 1.2 h, with a productivity of 2.74 g l^?1 h^?1.     

Two-stage fermentation process for enhanced mannitol production using Candida magnoliae mutant R9

Mutants of Candida magnoliae NCIM 3470 were generated by treatment of ultra-violet radiations, ethyl methyl sulphonate and N-methyl-N′-nitro-N-nitrosoguanidine. Mutants with higher reductase activity were screened by means of 2,3,5-triphenyl tetrazolium chloride agar plate assay. Among the screened mutants, the mutant R9 produced maximum mannitol (i.e. 46 g l^?1) in liquid fermentation medium containing 250 g l^?1 glucose and hence was selected for further experiments. Preliminary optimization studies were carried out on shake-flask level which increased the mannitol production to 60 g l^?1 in liquid fermentation medium containing 300 g l^?1 glucose. A two-stage fermentation process comprising of growth phase and production phase was employed. During the growth phase, glucose was supplemented and aerobic conditions were maintained. Thereafter, the production phase was initiated by supplementing fructose and switching to anaerobic conditions by discontinuing aeration and decreasing the speed of agitation. The strategy of two-stage fermentation significantly enhanced the production of mannitol up to 240 g l^?1, which is the highest among all fermentative production processes and corresponds to 81 % yield and 4 g l^?1 h^?1 productivity without formation of any by-product.     

Characterization of a recombinant l-rhamnose isomerase from Dictyoglomus turgidum and its application for l-rhamnulose production

A putative recombinant enzyme from Dictyoglomus turgidum was characterized and immobilized on Duolite A568 beads. The native enzyme was a 46 kDa tetramer. Its activity was highest for l-rhamnose, indicating that it is an l-rhamnose isomerase. The maximum activities of both the free and immobilized enzymes for l-rhamnose isomerization were at pH 8.0 and 75 °C in the presence of Mn²⁺. Under these conditions, the half-lives of the free and immobilized enzymes were 28 and 112 h, respectively. In a packed-bed bioreactor, the immobilized enzyme produced an average of 130 g l-rhamnulose l^?1 from 300 g l-rhamnose l^?1 after 240 h at pH 8.0, 70 °C, and 0.6 h^?1, with a productivity of 78 g l^?1 h^?1 and a conversion yield of 43 %. To the best of our knowledge, this is the first report describing the enzymatic production of l-rhamnulose.     

Continuous production of high-purity fructooligosaccharides and ethanol by immobilized Aspergillus japonicus and Pichia heimii

High-purity fructooligosaccharides (FOS) were produced from sucrose by an innovative process incorporating immobilized Aspergillus japonicus and Pichia heimii cells. Intracellular FTase of A. japonicus converted sucrose into FOS and glucose, and P. heimii fermented glucose mainly into ethanol. The continuous production of FOS was carried out using a tanks-in-series bioreactor consisting of three stirred tanks. When a solution composed of 1 g L^?1 yeast extract and 300 g L^?1 sucrose was fed continuously to the bioreactor at a dilution rate of 0.1 h^?1, FOS at a purity of up to 98.2 % could be achieved and the value-added byproduct ethanol at 79.6 g L^?1 was also obtained. One gram of sucrose yielded 0.62 g FOS and 0.27 g ethanol. This immobilized dual-cell system was effective for continuous production of high-purity FOS and ethanol for as long as 10 days.     

Nisin production in a chitin-including continuous fermentation system with Lactococcus lactis displaying a cell wall chitin-binding domain

The limiting factors in the continuous production of nisin are high amount of biomass loss and low dilution rate application. In this study, a chitin-including continuous nisin fermentation system (CICON-FER) was constructed for high volumetric nisin production using nisin producer L. lactis displaying cell wall chitin-binding domain (ChBD) together with chitin in the reactor. In this respect, the highest binding conditions of relevant L. lactis cells to chitin were determined. Then the chitin flakes carrying nisin-producing L. lactis cells were used within the CICON-FER system at different dilution rates (0.1–0.9 h^?1) and initial glucose concentrations (20–60 g l^?1). The results revealed that the pH 7 conditions and the use of 100 mM sodium phosphate buffer with 0.1 % Tween 20 and Triton X-100 significantly increased the binding capacity of ChBD displaying L. lactis cells to chitin. The constructed CICON-FER system maintained the presence of the ChBD surface displaying L. lactis cells in the reactor system until 0.9 h^?1 dilution rate that resulted in a considerably high level of volumetric nisin production and productivity (10,500 IU ml^?1 and 9,450 IU ml^?1 h^?1, respectively) with the combination of a 0.9-h^?1 dilution rate and a 40-g l^?1 initial glucose concentration. In conclusion, an innovative nisin fermentation system that yielded the highest nisin production thus far and that was feasible for industrial application was created.     

A quantitative study of eicosapentaenoic acid (EPA) production by Nannochloropsis gaditana for aquaculture as a function of dilution rate,temperature and average irradiance

Different pilot-scale outdoor photobioreactors using medium recycling were operated in a greenhouse under different environmental conditions and the growth rates (0.1 to 0.5 day^?1) obtained evaluated in order to compare them with traditional systems used in aquaculture. The annualized volumetric growth rate for Nannochloropsis gaditana was 0.26 g l^?1 day^?1 (peak 0.4 g l^?1 day^?1) at 0.4 day^?1 in a 5-cm wide flat-panel bioreactor (FP-PBR). The biomass productivity achieved in this reactor was 10-fold higher than in traditional reactors, reaching values of 28 % and 45 % dry weight (d.w.) of lipids and proteins, respectively, with a 4.3 % (d.w.) content of eicosapentaenoic acid (EPA). A model for predicting EPA productivity from N. gaditana cultures that takes into account the existence of photolimitation and photoinhibition of growth under outdoor conditions is presented. The effect of temperature and average irradiance on EPA content is also studied. The maximum EPA productivity attained is 30 mg l^?1 day^?1.     

Bioprospecting of thermo- and osmo-tolerant fungi from mango pulp–peel compost for bioethanol production

The persistent edaphic stress on microbial succession due to dynamic changes during composting was explored for selection of multi-stress tolerant microbe(s) desirable for ethanol production. A total of 23 strains were isolated from mango compost using four successive enrichments in YP broth (g l^?1): glucose, 100; 150; 250 with ethanol (40) and cycloheximide (0.4) at 40 °C, pH 6.0. Based on multi-gene ribotyping, 14 yeasts (61 %) of Saccharomycetaceae, 2 filamentous fungi (8.6 %) and 7 bacteria (30.4 %) were obtained. Phenetic and phylogenetic analysis of the 14 yeasts revealed 64.3 % tolerant to 500 g l^?1 glucose, growth at 45 °C and resemblance to Candida sp. (14.3 %), Kluyveromyces marxianus (35.7 %), Pichia kudriavzevii (21.4 %) and Saccharomyces cerevisiae (28.6 %). Assessment of the 14 yeasts in glucose fermentation medium (pH 4.5 at 40 °C) showed ethanol productivity of ≥92 % by 12 yeasts with theoretical yields of 90–97 %. Fermentation of molasses (150 g l^?1 glucose equivalent) by P. kudriavzevii D1C at 40 °C resulted in 73.70 ± 0.02 g l^?1 ethanol and productivity of 4.91 ± 0.01 g l^?1 h^?1. Assessment of P. kudriavzevii D1C revealed multi-stress tolerance towards 5-hydroxymethyl furfural, ethanol (20 %, v/v), high gravity and H₂O₂ (0.3 M) indicating suitability for ethanol production using high gravity molasses and pre-treated lignocellulosic biomass fermentation.     

Pilot-scale culture of somatic embryos of Eleutherococcus senticosus in airlift bioreactors for the production of eleutherosides

Purpose of work

To establish pilot scale bioreactor cultures of somatic embryos of Siberian ginseng for the production of biomass and eleutherosides. Somatic embryos of Eleutherococcus senticosus were cultured in airlift bioreactors using Murashige and Skoog medium with 30 g sucrose l^?1 for the production of biomass and eleutherosides. Various parameters including the type of bioreactor, aeration volume, and inoculum density were optimized for 3 l capacity bioreactors. Balloon-type airlift bioreactors, utilizing a variable aeration volume of 0.1–0.3 vvm and an inoculum of 5 g l^?1, were suitable for biomass and eleutheroside production. In 500 l balloon-type airlift bioreactors, 11.3 g dry biomass l^?1, 220 µg eleutheroside B l^?1, 413 µg eleutheroside E l^?1, and 262 µg eleutheroside E1 l^?1 were produced.