Protein adhesion force dynamics and single adhesion events.

Using the manipulation force microscope, a novel atomic force microscope, the adhesion forces of bovine serum albumin, myoglobin, ferritin, and lysozyme proteins to glass and polystyrene substrates were characterized by following the force necessary to displace an adsorbed protein-covered microsphere over several orders of magnitude in time. This force was consistent with a power law with exponent a = 0.37 +/- 0.03 on polystyrene, indicating that there is no typical time scale for adhesion on this substrate. On glass, the rate of adhesion depended strongly on protein charge. Forces corresponding to single protein adhesion events were identified. The typical rupture force of a single lysozyme, ferritin, bovine serum albumin, and myoglobin protein adhering to glass was estimated to be 90 +/- 10 pN, 115 +/- 13 pN, 277 +/- 44 pN, and 277 +/- 44 pN, respectively, using a model of the experimental system. These forces, as well as the force amplitudes on hydrophobic polystyrene, correlate with protein stiffness.     

Adherence of Staphylococcus aureus fibronectin binding protein A mutants: an investigation using optical tweezers

Bacterial adhesion to extracellular matrix proteins plays a major role in infections of host tissue and medical devices. In some species of gram-positive cocci, this adhesion is mediated by specific molecules present on the bacterial cell surface. We have used optical tweezers to dynamically measure the adhesive force between an individual Staphylococcus aureus bacterium and a fibronectin-coated surface. A bacterium was optically trapped and brought in contact with a 10-microm diameter polystyrene microsphere coated with fibronectin. The force required to detach the cell from the microsphere was measured by tracking the displacement signals of the trapped cell on a quadrant photodiode throughout the detachment process for a series of S. aureus strains expressing fibronectin-binding proteins with various degrees of mutation. The single-bond rupture forces ranged between 15 and 26 pN depending on the extent of mutation. No binding was observed in the strain with the highest degree of mutation. These results confirm that multiple regions of the S. aureus fibronectin adhesin participate in the binding process and provide further insight into the role of these regions in the adhesive process.     

Histamine effects on endothelial cell fibronectin interaction studied by atomic force microscopy

Atomic force microscopy was used to investigate the cellular response to histamine, one of the major inflammatory mediators that cause endothelial hyperpermeability and vascular leakage. AFM probes were labeled with fibronectin and used to measure binding strength between alpha5beta1 integrin and fibronectin by quantifying the force required to break single fibronectin-integrin bonds. The cytoskeletal changes, binding probability, and adhesion force before and after histamine treatment on endothelial cells were monitored. Cell topography measurements indicated that histamine induces cell shrinkage. Local cell stiffness and binding probability increased twofold after histamine treatment. The force necessary to rupture single alpha5beta1-fibronectin bond increased from 34.0 +/- 0.5 pN in control cells to 39 +/- 1 pN after histamine treatment. Experiments were also conducted to confirm the specificity of the alpha5beta1-fibronectin interaction. In the presence of soluble GRGDdSP the probability of adhesion events decreased >50% whereas the adhesion force between alpha5beta1 and fibronectin remained unchanged. These data indicate that extracellular matrix-integrin interactions play an important role in the endothelial cell response to changes of external chemical mediators. These changes can be recorded as direct measurements on live endothelial cells by using atomic force microscopy.     

Affinity imaging of red blood cells using an atomic force microscope.

We used an atomic force microscope (AFM) to produce an image of a mixed layer of group A and O red blood cells with a contrast based only on the measured strength of a specific receptor-ligand pair. The image was obtained by measuring and plotting for each image pixel the adhesion force between the mixed RBC layer and the AFM tip functionalized with Helix pomatia lectin. The high specificity of that lectin for the N -acetylgalactosamine-terminated glycolipids present in the membrane of group A RBCs enabled us to discriminate between the two cell populations and to produce an image based on affinity contrast. The rupture force of the adhesion events leading to the image formation were quantitatively analyzed and compared to rupture forces measured with the same AFM tip on N-acetylgalactosamine tethered to agarose beads. The mean rupture force was found to be 65 pN when measured on the group A RBCs and 35 pN on the agarose beads. These results show that the adhesion, mediated by only a few receptor-ligand pairs, produces sufficient contrast for the affinity image formation.     

Adhesion of cells to polystyrene surfaces

The surface treatment of polystyrene, which is required to make polystyrene suitable for cell adhesion and spreading, was investigated. Examination of surfaces treated with sulfuric acid or various oxidizing agents using (a) x-ray photoelectron and attenuated total reflection spectroscopy and (b) measurement of surface carboxyl-, hydroxyl-, and sulfur-containing groups by various radiochemical methods showed that sulfuric acid produces an insignificant number of sulfonic acid groups on polystyrene. This technique together with various oxidation techniques that render surfaces suitable for cell culture generated high surface densities of hydroxyl groups. The importance of surface hydroxyl groups for the adhesion of baby hamster kidney cells or leukocytes was demonstrated by the inhibition of adhesion when these groups were blocked: blocking of carboxyl groups did not inhibit adhesion and may raise the adhesion of a surface. These results applied to cell adhesion in the presence and absence of serum. The relative unimportance of fibronectin for the adhesion and spreading of baby hamster kidney cells to hydroxyl-rich surfaces was concluded when cells spread on such surfaces after protein synthesis was inhibited with cycloheximide, fibronectin was removed by trypsinization, and trypsin activity was stopped with leupeptin.     

Quantitative analysis of platelet alpha v beta 3 binding to osteopontin using laser tweezers

To determine whether platelet adhesion to surfaces coated with the matrix protein osteopontin requires an agonist-induced increase in the affinity of the integrin alpha v beta 3 for this ligand, we used laser tweezers to measure the rupture force between single alpha v beta 3 molecules on the platelet surface and osteopontin-coated beads. Virtually all platelets stimulated with 10 microM ADP bound strongly to osteopontin, producing rupture forces as great as 100 piconewtons (pN) with a peak at 45-50 pN. By contrast, 90% of unstimulated, resting non-reactive platelets bound weakly to osteopontin, with rupture forces rarely exceeding 30-35 pN. However, approximately 10% of unstimulated platelets, resting reactive platelets, exhibited rupture force distributions similar to stimulated platelets. Moreover, ADP stimulation resulted in a 12-fold increase in the probability of detecting rupture forces >30 pN compared with resting non-reactive platelets. Pre-incubating stimulated platelets with the inhibitory prostaglandin E1, a cyclic RGD peptide, the monoclonal antibody abciximab, or the alpha v beta 3-specific cyclic peptide XJ735 returned force histograms to those of non-reactive platelets. These experiments demonstrate that ADP stimulation increases the strength of the interaction between platelet alpha v beta 3 and osteopontin. Furthermore, they indicate that platelet adhesion to osteopontin-coated surfaces requires an agonist-induced exposure of alpha v beta 3-binding sites for this ligand.     

Discrete interactions in cell adhesion measured by single-molecule force spectroscopy

Cell-cell adhesion mediated by specific cell-surface molecules is essential for multicellular development. Here we quantify de-adhesion forces at the resolution of individual cell-adhesion molecules, by controlling the interactions between single cells and combining single-molecule force spectroscopy with genetic manipulation. Our measurements are focused on a glycoprotein, contact site A (csA), as a prototype of cell-adhesion proteins. csA is expressed in aggregating cells of Dictyostelium discoideum, which are engaged in development of a multicellular organism. Adhesion between two adjacent cell surfaces involves discrete interactions characterized by an unbinding force of 23 +/- 8 pN, measured at a rupture rate of 2.5 +/- 0.5 microm s-1.     

Intramembrane events during the nerve impulse

In current literature the cell adhesion to solid surfaces has been treated in the context of basic physicochemical forces. However, in all these reports the concept of solid surface force has not been properly analyzed. The surface forces acting across an interface formed when two phases meet has been shown to consist of dispersion (attraction) forces and polar forces (arising from different interactions). Current theories have repeatedly neglected the role of polar forces in the cell adhesion. In order to clarify this concept, the particular case, i.e. adhesion of cells on polystyrene surfaces with varying degree of polar groups is described. In this case, the adhesion of cells was reported to increase with polarity of polystyrene, and this agrees with the present study that the solid polar force component increased in the same manner.     

Measurement of adhesive forces between individual Staphylococcus aureus MSCRAMMs and protein-coated surfaces by use of optical tweezers

The force required to rupture bonds between individual Staphylococcus aureus MSCRAMMs and surfaces coated with extracellular matrix molecules has been quantified by using optical tweezers. The observed binding forces between fibrinogen or fibronectin and S. aureus MSCRAMMs occurred as an approximate integer multiple of 20 or 25 pN, respectively.     

Atomic Force Microscopy Reveals a Role for Endothelial Cell ICAM-1 Expression in Bladder Cancer Cell Adherence

Cancer metastasis is a complex process involving cell-cell interactions mediated by cell adhesive molecules. In this study we determine the adhesion strength between an endothelial cell monolayer and tumor cells of different metastatic potentials using Atomic Force Microscopy. We show that the rupture forces of receptor-ligand bonds increase with retraction speed and range between 20 and 70 pN. It is shown that the most invasive cell lines (T24, J82) form the strongest bonds with endothelial cells. Using ICAM-1 coated substrates and a monoclonal antibody specific for ICAM-1, we demonstrate that ICAM-1 serves as a key receptor on endothelial cells and that its interactions with ligands expressed by tumor cells are correlated with the rupture forces obtained with the most invasive cancer cells (T24, J82). For the less invasive cancer cells (RT112), endothelial ICAM-1 does not seem to play any role in the adhesion process. Moreover, a detailed analysis of the distribution of rupture forces suggests that ICAM-1 interacts preferentially with one ligand on T24 cancer cells and with two ligands on J82 cancer cells. Possible counter receptors for these interactions are CD43 and MUC1, two known ligands for ICAM-1 which are expressed by these cancer cells.     

Direct force measurements between cellulose surfaces and colloidal silica particles

The interaction of cellulose layers with colloidal silica particles was investigated by direct force measurements with the atomic force microscope (AFM). Upon approach, repulsive forces were found between the negatively charged silica particles and the cellulose surface. The forces were interpreted quantitatively in terms of electrostatic interactions due to overlap of diffuse layers originating from negatively charged carboxylic groups on the cellulose surface. The diffuse layer charge density of cellulose was estimated to be 0.80 mC/m2 at pH 9.5 and 0.21 mC/m2 at pH 4. The forces upon retraction are characterized by molecular adhesion events, whereby individual cellulose chains desorb from the probe surface. The retraction profiles are dominated by well-defined force plateaus, which correspond to single-chain desorption forces of 35-42 pN. We surmise that adsorption of cellulose to probe surfaces is dominated by nonelectrostatic forces, probably originating from hydrogen bonding. Electrostatic contributions to desorption force could be detected only at high pH, where the silica surface is highly charged.     

Nanoscale characterization and determination of adhesion forces of Pseudomonas aeruginosa pili by using atomic force microscopy

Type IV pili play an important role in bacterial adhesion, motility, and biofilm formation. Here we present high-resolution atomic force microscopy (AFM) images of type IV pili from Pseudomonas aeruginosa bacteria. An individual pilus ranges in length from 0.5 to 7 microm and has a diameter from 4 to 6 nm, although often, pili bundles in which the individual filaments differed in both length and diameter were seen. By attaching bacteria to AFM tips, it was possible to fasten the bacteria to mica surfaces by pili tethers. Force spectra of tethered pili gave rupture forces of 95 pN. The slopes of force curves close to the rupture force were nearly linear but showed little variation with pilus length. Furthermore, force curves could not be fitted with wormlike-chain polymer stretch models when using realistic persistence lengths for pili. The observation that the slopes near rupture did not depend on the pili length suggests that they do not represent elastic properties of the pili. It is possible that this region of the force curves is determined by an elastic element that is part of the bacterial wall, although further experiments are needed to confirm this.     

Do β-lactam antibiotics permeabilize the outer membrane of gram-negative bacteria? An electrochemical investigation

Abstract The extent of short-term adhesion of various suspension-cultured plant cell species to polymer substrates exhibiting a wide range of surface tensions was examined. Adhesion of cells with a relatively low surface tension, suspended in distilled water, to the polymers fluorinated ethylenepropylene (FEP), polystyrene (PS), polyethylene terephthalate (PET), and sulphonated polystyrene (SPS) increased with decreasing substrate surface tension following the sequence SPS < PET < PS < FEP. These results are in agreement with the predictions of a thermodynamic model of particle adhesion which considers the role of the substrate, suspending-liquid, and cellular surface tensions. In contrast, little adhesion of relatively high surface tension cells to any of the polymer substrates was observed. Electrostatic repulsive forces between these cells and the polymer surface prevent adhesion because the magnitude of the attractive van der Waals force is small. A correlation was observed between the general adhesiveness of the various cultured plant cell species, especially to the low surface tension substrates, and the cellular surface tension determined by measuring the water contact angle on smooth layers of the cells. The cellular surface tensions ranged from approximately 42 mJ/m² for Digitalis purpurea cells to approximately 70mJ/m² for Papaver somniferum cells. Adhesion of cells to the polymer substrates increased with decreasing cellular surface tension under otherwise identical conditions. These results are also consistent with thermodynamic model predictions.     

Surface interaction forces of cellulose nanocrystals grafted with thermoresponsive polymer brushes

The colloidal stability and thermoresponsive behavior of poly(N-isopropylacrylamide) brushes grafted from cellulose nanocrystals (CNCs) of varying graft densities and molecular weights was investigated. Indication of the grafted polymer brushes was obtained after AFM imaging of CNCs adsorbed on silica. Also, aggregation of the nanoparticles carrying grafts of high degree of polymerization was observed. The responsiveness of grafted CNCs in aqueous dispersions and as an ultrathin film was evaluated by using light scattering, viscosimetry, and colloidal probe microscopy (CPM). Light transmittance measurements showed temperature-dependent aggregation originating from the different graft densities and molecular weights. The lower critical solution temperature (LCST) of grafted poly(NiPAAm) brushes was found to decrease with the ionic strength, as is the case for free poly(NiPAAm) in aqueous solution. Thermal responsive behavior of grafted CNCs in aqueous dispersions was observed by a sharp increase in dispersion viscosity as the temperature approached the LCST. CPM in liquid media for asymmetric systems consisting of ultrathin films of CNCs and a colloidal silica probe showed the distinctive effects of the grafted polymer brushes on interaction and adhesive forces. The origin of such forces was found to be mainly electrostatic and steric in the case of bare and grafted CNCs, respectively. A decrease in the onset of attractive and adhesion forces of grafted CNCs films were observed with the ionic strength of the aqueous solution. The decreased mobility of polymer brushes upon partial collapse and decreased availability of hydrogen bonding sites with higher electrolyte concentration were hypothesized as the main reasons for the less prominent polymer bridging between interacting surfaces.     

Friction-controlled traction force in cell adhesion

The force balance between the extracellular microenvironment and the intracellular cytoskeleton controls the cell fate. We report a new (to our knowledge) mechanism of receptor force control in cell adhesion originating from friction between cell adhesion ligands and the supporting substrate. Adherent human endothelial cells have been studied experimentally on polymer substrates noncovalently coated with fluorescent-labeled fibronectin (FN). The cellular traction force correlated with the mobility of FN during cell-driven FN fibrillogenesis. The experimental findings have been explained within a mechanistic two-dimensional model of the load transfer at focal adhesion sites. Myosin motor activity in conjunction with sliding of FN ligands noncovalently coupled to the surface of the polymer substrates is shown to result in a controlled traction force of adherent cells. We conclude that the friction of adhesion ligands on the supporting substrate is important for mechanotransduction and cell development of adherent cells in vitro and in vivo.     

Rapid and Serial Quantification of Adhesion Forces of Yeast and Mammalian Cells

Cell adhesion to surfaces represents the basis for niche colonization and survival. Here we establish serial quantification of adhesion forces of different cell types using a single probe. The pace of single-cell force-spectroscopy was accelerated to up to 200 yeast and 20 mammalian cells per probe when replacing the conventional cell trapping cantilever chemistry of atomic force microscopy by underpressure immobilization with fluidic force microscopy (FluidFM). In consequence, statistically relevant data could be recorded in a rapid manner, the spectrum of examinable cells was enlarged, and the cell physiology preserved until approached for force spectroscopy. Adhesion forces of Candida albicans increased from below 4 up to 16 nN at 37°C on hydrophobic surfaces, whereas a Δhgc1-mutant showed forces consistently below 4 nN. Monitoring adhesion of mammalian cells revealed mean adhesion forces of 600 nN of HeLa cells on fibronectin and were one order of magnitude higher than those observed for HEK cells.     

Activation of individual alphaIIbbeta3 integrin molecules by disruption of transmembrane domain interactions in the absence of clustering

We used laser tweezers-based force spectroscopy to measure the binding strength between fibrinogen molecules covalently bound to latex beads and either wild-type alphaIIbbeta3 molecules or alphaIIbbeta3 molecules containing the transmembrane domain mutations beta3 G708N or alphaIIb G972N expressed on Chinese hamster ovary cells. As we demonstrated previously for alphaIIbbeta3 on agonist-stimulated platelets and for purified alphaIIbbeta3 molecules incubated with Mn(2+), two regimes of rupture forces were present when wild-type alphaIIbbeta3 was activated by the monoclonal antibody PT25-2: rupture forces of 20-60 pN with an exponentially decreasing probability of detection and rupture forces in the range of 60-150 pN with a maximum at approximately 70-80 pN. Both rupture force regimes were specific for fibrinogen binding to the activated conformation of alphaIIbbeta3 because they were inhibited by alphaIIbbeta3-specific antagonists. Identical rupture force regimes were present constitutively when cells expressing the alphaIIb and beta3 transmembrane domain mutants were studied, confirming that these mutations induced an active alphaIIbbeta3 conformation. Moreover, there were no significant differences in the yield strength of the low-to-moderate and strong force regimes when alphaIIbbeta3 was activated by PT25-2 or the transmembrane domain mutations, implying that there was no fundamental difference in the way these forms of activated alphaIIbbeta3 interacted with fibrinogen. Thus, the two-step pathway of the interaction of alphaIIbbeta3 with fibrinogen we have identified appears to be a fundamental property of the high-affinity state of alphaIIbbeta3 and is identical regardless of whether this affinity state is achieved by intracellular, extracellular, or membrane-associated events.     

Extracellular matrix-specific focal adhesions in vascular smooth muscle produce mechanically active adhesion sites

Integrin-mediated mechanotransduction in vascular smooth muscle cells (VSMCs) plays an important role in the physiological control of tissue blood flow and vascular resistance. To test whether force applied to specific extracellular matrix (ECM)-integrin interactions could induce myogenic-like mechanical activity at focal adhesion sites, we used atomic force microscopy (AFM) to apply controlled forces to specific ECM adhesion sites on arteriolar VSMCs. The tip of AFM probes were fused with a borosilicate bead (2 ~ 5 microm) coated with fibronectin (FN), collagen type I (CNI), laminin (LN), or vitronectin (VN). ECM-coated beads induced clustering of alpha(5)- and beta(3)-integrins and actin filaments at sites of bead-cell contact indicative of focal adhesion formation. Step increases of an upward (z-axis) pulling force (800 ~ 1,600 pN) applied to the bead-cell contact site for FN-specific focal adhesions induced a myogenic-like, force-generating response from the VSMC, resulting in a counteracting downward pull by the cell. This micromechanical event was blocked by cytochalasin D but was enhanced by jasplakinolide. Function-blocking antibodies to alpha(5)beta(1)- and alpha(v)beta(3)-integrins also blocked the micromechanical cell event in a concentration-dependent manner. Similar pulling experiments with CNI, VN, or LN failed to induce myogenic-like micromechanical events. Collectively, these results demonstrate that mechanical force applied to integrin-FN adhesion sites induces an actin-dependent, myogenic-like, micromechanical event. Focal adhesions formed by different ECM proteins exhibit different mechanical characteristics, and FN appears of particular relevance in its ability to strongly attach to VSMCs and to induce myogenic-like, force-generating reactions from sites of focal adhesion in response to externally applied forces.     

The NTA-His6 bond is strong enough for AFM single-molecular recognition studies

There is a need in current atomic force microscopy (AFM) molecular recognition studies for generic methods for the stable, functional attachment of proteins on tips and solid supports. In the last few years, the site-directed nitrilotriacetic acid (NTA)-polyhistidine (Hisn) system has been increasingly used towards this goal. Yet, a crucial question in this context is whether the NTA-Hisn bond is sufficiently strong for ensuring stable protein immobilization during force spectroscopy measurements. Here, we measured the forces between AFM tips modified with NTA-terminated alkanethiols and solid supports functionalized with His6-Gly-Cys peptides in the presence of Ni2+. The force histogram obtained at a loading rate of 6600 pN s(-1) showed three maxima at rupture forces of 153 +/- 57 pN, 316 +/- 50 pN and 468 +/- 44 pN, that we attribute primarily to monovalent and multivalent interactions between a single His6 moiety and one, two and three NTA groups, respectively. The measured forces are well above the 50-100 pN unbinding forces typically observed by AFM for receptor-ligand pairs. The plot of adhesion force versus log (loading rate) revealed a linear regime, from which we deduced a kinetic off-rate constant of dissociation, k(off) approximately 0.07 s(-1). This value is in the range of that estimated for the multivalent interaction involving two NTA, using fluorescence measurements, and may account for an increased binding stability of the NTA-His6 bond. We conclude that the NTA-His6 system is a powerful, well-suited platform for the stable, oriented immobilization of proteins in AFM single-molecule studies.     

Adhesively-tensed cell membranes: lysis kinetics and atomic force microscopy probing

Membrane tension underlies a range of cell physiological processes. Strong adhesion of the simple red cell is used as a simple model of a spread cell with a finite membrane tension-a state which proves useful for studies of both membrane rupture kinetics and atomic force microscopy (AFM) probing of native structure. In agreement with theories of strong adhesion, the cell takes the form of a spherical cap on a substrate densely coated with poly-L-lysine. The spreading-induced tension, sigma, in the membrane is approximately 1 mN/m, which leads to rupture over many minutes; and sigma is estimated from comparable rupture times in separate micropipette aspiration experiments. Under the sharpened tip of an AFM probe, nano-Newton impingement forces (10-30 nN) are needed to penetrate the tensed erythrocyte membrane, and these forces increase exponentially with tip velocity ( approximately nm/ms). We use the results to clarify how tapping-mode AFM imaging works at high enough tip velocities to avoid rupturing the membrane while progressively compressing it to a approximately 20-nm steric core of lipid and protein. We also demonstrate novel, reproducible AFM imaging of tension-supported membranes in physiological buffer, and we describe a stable, distended network consistent with the spectrin cytoskeleton. Additionally, slow retraction of the AFM tip from the tensed membrane yields tether-extended, multipeak sawtooth patterns of average force approximately 200 pN. In sum we show how adhesive tensioning of the red cell can be used to gain novel insights into native membrane dynamics and structure.