Synthesis and characterization of thermally and chemically gelling injectable hydrogels for tissue engineering

Novel, injectable hydrogels were developed that solidify through a physical and chemical dual-gelation mechanism upon preparation and elevation of temperature to 37 °C. A thermogelling, poly(N-isopropylacrylamide)-based macromer with pendant epoxy rings and a hydrolytically degradable polyamidoamine-based diamine cross-linker were synthesized, characterized, and combined to produce in situ forming hydrogel constructs. Network formation through the epoxy-amine reaction was shown to be rapid and facile, and the progressive incorporation of the hydrophilic polyamidoamine cross-linker into the hydrogel was shown to mitigate the often problematic tendency of thermogelling materials to undergo significant postformation gel syneresis. The results suggest that this novel class of injectable hydrogels may be attractive substrates for tissue engineering applications due to the synthetic versatility of the component materials and beneficial hydrogel gelation kinetics and stability.     

Structure-property evaluation of thermally and chemically gelling injectable hydrogels for tissue engineering

The impact of synthesis and solution formulation parameters on the swelling and mechanical properties of a novel class of thermally and chemically gelling hydrogels combining poly(N-isopropylacrylamide)-based thermogelling macromers containing pendant epoxy rings with polyamidoamine-based hydrophilic and degradable diamine cross-linking macromers was evaluated. Through variation of network hydrophilicity and capacity for chain rearrangement, the often problematic tendency of thermogelling hydrogels to undergo significant syneresis was addressed. The demonstrated ability to tune postformation dimensional stability easily at both the synthesis and formulation stages represents a significant novel contribution toward efforts to utilize poly(N-isopropylacrylamide)-based polymers as injectable biomaterials. Furthermore, the cytocompatibility of the hydrogel system under relevant conditions was established while demonstrating time- and dose-dependent cytotoxicity at high solution osmolality. Such injectable in situ forming degradable hydrogels with tunable water content are promising candidates for many tissue-engineering applications, particularly for cell delivery to promote rapid tissue regeneration in non-load-bearing defects.     

New biodegradable thermogelling copolymers having very low gelation concentrations

New biodegradable multiblock amphiphilic and thermosensitive poly(ether ester urethane)s consisting of poly[(R)-3-hydroxybutyrate] (PHB), poly(ethylene glycol) (PEG), and poly(propylene glycol) (PPG) blocks were synthesized, and their aqueous solutions were found to undergo a reversible sol-gel transition upon temperature change at very low copolymer concentrations. The multiblock poly(ether ester urethane)s were synthesized from diols of PHB, PEG, and PPG using 1,6-hexamethylene diisocyanate as a coupling reagent. The chemical structures and molecular characteristics of the copolymers were studied by GPC, 1H NMR, 13C NMR, and FTIR. The thermal stability of the poly(PEG/PPG/PHB urethane)s was studied by thermogravimetry analysis (TGA), and the PHB contents were calculated based on the thermal degradation profile. The results were in good agreement with those obtained from the 1H NMR measurements. The poly(PEG/PPG/ PHB urethane)s presented better thermal stability than the PHB precursors. The water soluble poly(ether ester urethane)s had very low critical micellization concentration (CMC). Aqueous solutions of the new poly(ether ester urethane)s underwent a sol-gel-sol transition as the temperature increased from 4 to 80 degrees C, and showed a very low critical gelation concentration (CGC) ranging from 2 to 5 wt %. As a result of its multiblock architecture, a novel associated micelle packing model can be proposed for the sol-gel transition for the copolymer gels of this system. The new material is thought to be a promising candidate for injectable drug systems that can be formulated at low temperatures and forms a gel depot in situ upon subcutaneous injection.     

Synthesis and characterization of triblock copolymers of methoxy poly(ethylene glycol) and poly(propylene fumarate)

Amphiphilic block copolymers were synthesized by transesterification of hydrophilic methoxy poly(ethylene glycol) (mPEG) and hydrophobic poly(propylene fumarate) (PPF) and characterized. Four block copolymers were synthesized with a 2:1 mPEG:PPF molar ratio and mPEGs of molecular weights 570, 800, 1960, and 5190 and PPF of molecular weight 1570 as determined by NMR. The copolymers synthesized with mPEG of molecular weights 570 and 800 had 1.9 and 1.8 mPEG blocks per copolymer, respectively, as measured by NMR, representing an ABA-type block copolymer. The number of mPEG blocks of the copolymer decreased with increasing mPEG block length to as low as 1.5 mPEG blocks for copolymer synthesized with mPEG of molecular weight 5190. At a concentration range of 5-25 wt % in phosphate-buffered saline, copolymers synthesized with mPEG molecular weights of 570 and 800 possessed lower critical solution temperatures (LCST) between 40 and 45 degrees C and between 55 and 60 degrees C, respectively. Aqueous solutions of copolymer synthesized with mPEG 570 and 800 also experienced thermoreversible gelation. The sol-gel transition temperature was dependent on the sodium chloride concentration as well as the mPEG block length. The copolymer synthesized from mPEG 570 had a transition temperature between 40 and 20 degrees C with salt concentrations between 1 and 10 wt %, while the sol-gel transition temperatures of the copolymer synthesized from mPEG molecular weight 800 were higher in the range 75-30 degrees C with salt concentrations between 1 and 15 wt %. These novel thermoreversible copolymers are the first biodegradable copolymers with unsaturated double bonds along their macromolecular chain that can undergo both physical and chemical gelation and hold great promise for drug delivery and tissue engineering applications.     

Hydroxylated poly(N-isopropylacrylamide) as functional thermoresponsive materials

In this study, we developed a poly(N-isopropylacrylamide)-based thermoresponsive polymeric material with a high content of hydroxyl groups. We newly designed the functional monomer, N-(2-hydroxyisopropyl)acrylamide (HIPAAm), considering maintaining the continuous and repeated structure of the isopropylamide group after copolymerization and the monomer reactivity ratios. The thermoresponsive polymer was derived by conventional radical copolymerization of HIPAAm with N-isopropylacrylamide (NIPAAm) in high yield. Estimation of monomer reactivity ratios, r(1) and r(2), supported the almost random sequence of the comonomers. The obtained copolymers showed a very sensitive phase transition and/or separation in response to temperature in aqueous media although they have many hydrophilic parts, and their thermoresponsive behavior was not affected by the pH. Furthermore, the cloud points of these copolymers closely depended on the HIPAAm content and could be easily controlled by adding salts. HIPAAm is expected to regulate the phase transition and/or separation temperature of the NIPAAm-based copolymers while maintaining their desirable sensitive thermoresponse. Differential scanning calorimetric analysis showed that dehydration of the polymer chains occurring in phase transition became incomplete with increasing HIPAAm content. Moreover, it was found that poly(NIPAAm-co-HIPAAm) having a high content of the HIPAAm unit showed liquid-liquid phase separation involving coacervation. The sizes of the coacervate droplets were relatively monodisperse and very minimal. Poly(NIPAAm-co-HIPAAm) is valuable for use in biomedical fields such as bioseparation.     

Fluorescently labeled branched polymers and thermal responsive nanoparticles for live cell imaging

Branched poly(methoxy-PEG acrylate) and thermally responsive poly(methoxy-PEG acrylate)-block-poly(N-isopropylacrylamide) are synthesized by RAFT polymerization. After reduction, these polymers are fluorescently labeled by reacting the free thiol groups with N-(5-fluoresceinyl)maleimide. As shown by DLS, the labeled copolymer poly(methoxy-PEG acrylate)-block-poly(N-isopropylacrylamide) forms nanoparticles at body temperature (37 °C) due to the presence of the thermosensitive poly(N-isopropylacrylamide). These materials were used as bioprobes for imaging HUVECs in vitro and chick embryo CAM in vivo. Both labeled polymer and nanoparticles are biocompatible and can be used as efficient fluorescent bioprobes.     

Synthesis and characterization of biocompatible thermo-responsive gelators based on ABA triblock copolymers

The synthesis of biocompatible, thermo-responsive ABA triblock copolymers in which the outer A blocks comprise poly(N-isopropylacrylamide) and the central B block is poly(2-methacryloyloxyethyl phosphorylcholine) is achieved using atom transfer radical polymerization with a commercially available bifunctional initiator. These novel triblock copolymers are water-soluble in dilute aqueous solution at 20 degrees C and pH 7.4 but form free-standing physical gels at 37 degrees C due to hydrophobic interactions between the poly(N-isopropylacrylamide) blocks. This gelation is reversible, and the gels are believed to contain nanosized micellar domains; this suggests possible applications in drug delivery and tissue engineering.     

Thermoreversible hydrogels from RAFT-synthesized BAB triblock copolymers: steps toward biomimetic matrices for tissue regeneration

Narrowly dispersed, temperature-responsive BAB block copolymers capable of forming physical gels under physiological conditions were synthesized via aqueous reversible addition fragmentation chain transfer (RAFT) polymerization. The use of a difunctional trithiocarbonate facilitates the two-step synthesis of BAB copolymers with symmetrical outer blocks. The outer B blocks of the triblock copolymers consist of poly(N-isopropylacrylamide) (PNIPAM) and the inner A block consists of poly(N,N-dimethylacrylamide). The copolymers form reversible physical gels above the phase transition temperature of PNIPAM at concentrations as low as 7.5 wt % copolymer. Mechanical properties similar to collagen, a naturally occurring polypeptide used as a three-dimensional in vitro cell growth scaffold, have been achieved. Herein, we report the mechanical properties of the gels as a function of solvent, polymer concentration, and inner block length. Structural information about the gels was obtained through pulsed field gradient NMR experiments and confocal microscopy.     

Copolymerization of 2-carboxyisopropylacrylamide with N-isopropylacrylamide accelerates cell detachment from grafted surfaces by reducing temperature

Acrylic acid (AAc) has been utilized to introduce reactive carboxyl groups to a temperature-responsive polymer, poly(N-isopropylacrylamide) (PIPAAm). However, AAc introduction shifts the copolymer phase transition temperatures higher and dampens the steep homopolymer phase transition with increasing AAc content. We previously synthesized 2-carboxyisopropylacrylamide (CIPAAm) having both a similar side chain structure to IPAAm and a functional carboxylate group in order to overcome these shortcomings. In the present study, these copolymers, grafted onto cell culture plastic, were assessed for cell adhesion control using their phase transition. AAc introduction to PIPAAm-grafted surfaces resulted in excessive surface hydration and hindered cell spreading in culture at 37 degrees C. In contrast, CIPAAm-containing copolymer-grafted surfaces exhibited relatively weak hydrophobicity similar to both homopolymer PIPAAm-grafted surfaces as well as commercial ungrafted tissue culture polystyrene dish surfaces. Cells adhered and spread well on these surfaces at 37 degrees C in culture. As observed previously on PIPAAm-grafted surfaces, cells were spontaneously detached from the copolymer-grafted surfaces by reducing culture temperature. Cell detachment was accelerated on the CIPAAm copolymer-grafted surfaces compared to pure IPAAm surfaces, suggesting that hydrophilic carboxyl group microenvironment in the monomer and polymer is important to accelerate grafted surface hydration below the lower critical solution temperature, detaching cells.     

Single step synthesis and characterization of thermoresponsive hyaluronan hydrogels

An efficient and scale-up ready single-step synthesis for the conjugation of thermoresponsive polymers to hyaluronic acid (HA) was established. Jeffamines(?) (JFM) and poly(N-isopropylacrylamide) (PNIPAM) were grafted to HA via direct amidation mediated by 1,1'-carbonyldiimidazole activation. The temperature-induced gelation of the semi-synthetic co-polymers was characterized by rheology as a function of the temperature and by differential scanning calorimetry (DSC). A HA-JFM conjugate with sol-gel transition in a physiologically relevant temperature range was identified. The grafting of PNIPAM resulted in the drastic change of the main rheological properties of native HA, revealing the hydrophobic non-covalent nature of the interactions between the thermoresponsive brushes in the gel state. Owing to the reversibility of these interactions and the sharpness of the transition, the HA-PNIPAM conjugates are suitable candidates for the incorporation of drugs, cells or ceramic materials for different biomedical applications.     

Photopolymerized thermosensitive hydrogels: synthesis, degradation, and cytocompatibility

In situ forming hydrogels based on thermosensitive polymers have attractive properties for tissue engineering. However, the physical interactions in these hydrogels are not strong enough to yield gels with sufficient stability for many of the proposed applications. In this study, additional covalent cross-links were introduced by photopolymerization to improve the mechanical properties and the stability of thermosensitive hydrogels. Methacrylate groups were coupled to the side chains of triblock copolymers (ABA) with thermosensitive poly( N-(2-hydroxypropyl) methacrylamide lactate) A blocks and a hydrophilic poly(ethylene glycol) B block. These polymers exhibit lower critical solution temperature (LCST) behavior in aqueous solution and the cloud point decreased with increasing amounts of methacrylate groups. These methacrylate groups were photopolymerized above the LCST to render covalent cross-links within the hydrophobic domains. The mechanical properties of photopolymerized hydrogels were substantially improved and their stability was prolonged significantly compared to nonphotopolymerized hydrogels. Whereas non-UV-cured gels disintegrated within 2 days at physiological pH and temperature, the photopolymerized gels degraded in 10 to 25 days depending on the degree of cross-linking. To assess biocompatibility, goat mesenchymal stem cells were seeded on the hydrogel surface or encapsulated within the gel and they remained viable as demonstrated by a LIVE/DEAD cell viability/cytotoxicity assay. Expression of alkaline phosphatase and production of collagen I demonstrated the functionality of the mesenchymal stem cells and their ability to differentiate upon encapsulation. Due to the improved mechanical properties, stability, and adequate cytocompatibility, the photopolymerized thermosensitive hydrogels can be regarded as highly potential materials for applications in tissue engineering.     

Bioresorbable and nonresorbable macroporous thermosensitive hydrogels prepared by cryopolymerization. Role of the cross-linking agent

Macroporous poly( N-isopropylacrylamide) (pNIPA) gels (so-called cryogels), cross-linked with different bis-acrylic compounds, N,N'-methylenebisacrylamide (MBAAm) and dimethacrylate-tyrosine-lysine-tyrosine (DMTLT), were prepared through free-radical polymerization at subzero temperature in dioxane/water media. DMTLT is a hydrolytically degradable cross-linker with relatively hydrophobic character. The effects of different synthesis conditions, namely the concentration of monomers, the cross-linker, and the initiator in the reaction mixture, on the structure of the pNIPA-cryogels have been studied. The equilibrium swelling ratio of the DMTLT cross-linked pNIPA cryogels at temperatures below lower critical solution temperature (LCST) of pNIPA, was over ten times higher than that of the gels synthesized at room temperature from the same feed composition. The MBAAm cross-linked pNIPA cryogels synthesized in water exhibited the highest equilibrium swelling and the fastest response. The critical transition temperature, T c, was lower ( T c approximately 31 degrees C) for pNIPA-cryogels synthesized in dioxane/water media or cross-linked with DMTLT as compared to MBAAm cross-linked pNIPA cryogels synthesized in water (T c approximately 33 degrees C). Scanning electron microscopy (SEM) revealed different porous structure and pore surface morphology depending on the cross-linker (MBAAm or DMTLT) and the solvent (water or dioxane/water) used. Gels and cryogels were also characterized by SAXS, showing that the nanostructure of the samples is related to swelling.     

In-situ injectable physically and chemically gelling NIPAAm-based copolymer system for embolization

The goal of this work is to make an injectable physically and chemically cross-linking NIPAAm-based copolymer system for endovascular embolization. A copolymer with N-isopropylacrylamide (NIPAAm) and hydroxyethyl methacrylate (HEMA) was synthesized and converted to poly(NIPAAm-co-HEMA-acrylate) functionalized with olefins. When poly(NIPAAm-co-HEMA-acrylate) was mixed with pentaerythritol tetrakis 3-mercaptopropionate (QT) stoichiometrically in a 0.1 N PBS solution of pH 7.4, it formed a temperature-sensitive hydrogel with low swelling through the Michael-type addition reaction and showed improved elastic properties at low frequency compared to physical gelation. This material could be useful for applications requiring water-soluble injection but lower swelling and lower creep properties than available with other soluble in-situ-gelling materials.     

Preparation of immobilized β-galactosidase by poly(vinylpyrrolidone) and the continuous hydrolysis of lactose in acid whey

Immobilized β-galactosidase gel was prepared using poly(vinylpyrrolidone) (PVP) under β-ray irradiation. In contrast to the gelation of N-vinylpyrrolidone monomer–enzyme solution, the gelation of PVP-β-galactosidase solution (PVP content: 10%) was almost completely uneffected by the dose rate and amount of phosphate present. PVP-enzyme solution was gelled by irradiation with 3.0 Mrad. The expressed activity of the PVP-enzyme gel was about 30% of the initial activity and added activity was almost totally entrapped. No leakage of enzyme from these gels could be detected. Leakage was, however, detected in the case of the gelation of PVP-enzyme solution containing more than 1% of enzyme protein. When the general properties of the gel were compared with those of the native enzyme, the gel proved to be slightly inferior to the native enzyme with respect to optimum temperature, heat stability, pH activity, and pH stability. Continuous hydrolysis of lactose in acid whey could be carried out at 50°C using a column packed with the gel and sawdust and the degree of hydrolysis was found to be almost, constant for 12 days. The merits of using PVP in the immobilization of enzymes include the simplicity of the procedure and the fact that the PVP-enzyme gel can be used in the food industry without anxiety because of its high degree of compatibility with living organisms.     

Influence of LA and GA sequence in the PLGA block on the properties of thermogelling PLGA-PEG-PLGA block copolymers

This paper reports the influence of sequence structures of block copolymers composed of poly(lactic acid-co-glycolic acid) (PLGA) and poly(ethylene glycol) (PEG) on their thermogelling aqueous behaviors. A series of thermogelling PLGA-PEG-PLGA triblock copolymers with similar chemical compositions and block lengths but different sequences of D,L-lactide (LA) and glycolide (GA) in the PLGA block were synthesized. The difference of sequence structures arises from the different reactivities of LA and GA during the copolymerization and the transesterification after polymerization. The sol-gel transition temperature and height of gel window were found to be regulated by the sequence structure. Our study reveals that the macromolecular sequence structure influences the hydrophobic/hydrophilic balance of this kind of amphiphilic copolymers and thus alters mesoscopic micellization and the forthcoming macroscopic physical gelation in water. This finding might be helpful to guide the molecular design of the underlying thermogelling systems as injectable hydrogels.     

Carbonated water mediated preparation of poly(N-isopropylacrylamide) thermoresponsive gels and liquids

Carbonic acid solution was used a medium for the free radical polymerization synthesis of poly( N-isopropylacrylamide) (p-nipam) thermoresponsive polymer as an alternative to conventional inert gas purging. It was found that p-nipam cross-linked gels or linear liquids and p-nipam/dextran magnetite composite gels could be very rapidly prepared and large gels recovered intact from open air vessels. A porogen was necessary for high thermoresponse, and dextran use resulted in microporous composite gels that gave optimal thermal response at weight ratio of p-nipam:dextran of 4:1. Up to 82% weight loss was rapidly obtained upon warming above the lower critical solution temperature. Analysis of products was made by transmission electron microscopy (TEM), scanning electron microscopy (SEM), Fourier transform infrared (FT-IR), and superconducting quantum interference device (SQUID). A simplified and efficient overall method for preparation of biomedical polymers is shown. A wider application of H2CO3 solution as a viable alternative media and to allow open air aqueous polymerizations of water soluble or hydrophilic monomers is indicated.     

Rapid deswelling response of poly(N-isopropylacrylamide)/poly(2-alkyl-2-oxazoline)/poly(2-hydroxyethyl methacrylate) hydrogels

Ternary poly( N-isopropylacrylamide)/poly(2-alkyl-2-oxazoline)/poly(2-hydroxyethyl methacrylate) (PNIPAAm/PROZO/PHEMA) hydrogels were prepared by the free-radical copolymerization of N-isopropylacrylamide (NIPAAm), 2-hydroxyethyl methacrylate (HEMA), and poly(2-alkyl-2-oxazoline) (PROZO) multifunctional macromonomers. The resulting polymeric materials were characterized by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM), as well as by equilibrium swelling experiments. All synthesized hydrogels display temperature sensitivity in the 28-38 degrees C range. A high rate of response was registered as compared to that of materials based only on PNIPAAm. The swelling-deswelling peculiar behavior was related to the chemical composition (hydrophile/hydrophobe balance), the length of the inserted PROZO sequence, and inner morphology, an aspect which points on its possible control by synthesis. It was evidenced that the architecture of the resulting porous materials has a high order degree, emerging from the self-assembling of the microgel particles, which provided numerous, nearly uniform, large water release channels.     

Temperature sensitization of liposomes by use of N-isopropylacrylamide copolymers with varying transition endotherms

Three kinds of copolymers of N-isopropylacrylamide (NIPAM) with the same conformational transition temperature and varying transition endotherms were synthesized with N-acryloylpyrrolidine (APr), N,N-dimethylacrylamide (DMAM), and N-isopropylmethacrylamide (NIPMAM) as the comonomers. Two dodecyl groups were incorporated into the termini of these copolymers as an anchor for the fixation to a liposomal membrane. Egg yolk phosphatidylcholine liposomes having these copolymers were prepared and their temperature-sensitive contents release and association properties were investigated. While these copolymer exhibited a conformational transition at ca. 40 degrees C, DeltaH for the transition increased in the order of poly(APr-co-NIPAM) < poly(DMAM-co-NIPAM) < poly(NIPMAM-co-NIPAM). The liposomes containing poly(NIPMAM-co-NIPAM) showed a drastic release enhancement of entrapped calcein above the transition temperature, whereas the liposomes with poly(DMAM-co-NIPAM) and those with poly(APr-co-NIPAM) exhibited moderate and slight enhancement of calcein release above that temperature, respectively. On the contrary, the liposomes containing poly(APr-co-NIPAM) showed significant aggregation above the transition temperature, but the aggregation was hardly observed for the liposomes having poly(NIPMAM-co-NIPAM), indicating that poly(APr-co-NIPAM) more efficiently made the liposome surface hydrophobic. Thus, we concluded that the copolymer with a large DeltaH is suitable for obtaining functional liposomes with a temperature-sensitive contents release property, whereas the copolymer with a small DeltaH is appropriate for preparing functional liposomes with a temperature-sensitive surface property.     

Controlling network structure in degradable thiol-acrylate biomaterials to tune mass loss behavior

Degradable thiol-acrylate materials were synthesized from the mixed-mode polymerization of a diacrylate poly(ethylene glycol) (PEG) monomer with thiol monomers of varying functionalities to control the final network structure, ultimately influencing the material's degradation behavior and properties. The influence of the concentration of thiol groups and monomer functionality on the mass loss profiles were examined experimentally and theoretically. Mass loss behavior was also predicted for networks with varying extents of cyclization, PEG molecular weight, and backbone chain length distributions. Experimental results indicate that increasing the thiol concentration from 10 to 50 mol % shifted the reverse gelation time from 35 to 8 days and the extent of mass loss at reverse gelation from 75 to 40%. Similarly, decreasing the thiol functionality from 4 to 1 shifted the reverse gelation time from 18 to 8 days and the mass loss extent at reverse gelation from 70 to 45%.     

Biodegradable thermoresponsive hydrogels for aqueous encapsulation and controlled release of hydrophilic model drugs

A series of hydrogels with both thermoresponsive and completely biodegradable properties was developed for aqueous encapsulation and controlled release of hydrophilic drugs in response to temperature change. The hydrogels were prepared in phosphate-buffered saline (pH 7.4) through free radical polymerization of N-isopropylacrylamide (NIPAAm) monomer and a dextran macromer containing multiple hydrolytically degradable oligolactate-2-hydroxyethyl methacrylate units (Dex-lactateHEMA). Swelling measurement results demonstrated that four gels with feeding weight ratios of NIPAAm:Dex-lactateHEMA = 7:2, 6:3, 5:4, and 4:5 (w/w) were thermoresponsive by showing a lower critical solution temperature at approximately 32 degrees C. The swelling and degradation of the hydrogels strongly depended on temperature and hydrogel composition. An empirical mathematical model was established to describe the fast water absorption at the early stage and deswelling at the late stage of the hydrogels at 37 degrees C. Two hydrophilic model drugs, methylene blue and bovine serum albumin, were loaded into the hydrogels during the synthesis process. The molecular size of the drugs, the hydrophilicity and degradation of the hydrogels, and temperature played important roles in controlling the drug release.