Increased Throughput by Parallelization of Library Preparation for Massive Sequencing

Background

Massively parallel sequencing systems continue to improve on data output, while leaving labor-intensive library preparations a potential bottleneck. Efforts are currently under way to relieve the crucial and time-consuming work to prepare DNA for high-throughput sequencing.

Methodology/Principal Findings

In this study, we demonstrate an automated parallel library preparation protocol using generic carboxylic acid-coated superparamagnetic beads and polyethylene glycol precipitation as a reproducible and flexible method for DNA fragment length separation. With this approach the library preparation for DNA sequencing can easily be adjusted to a desired fragment length. The automated protocol, here demonstrated using the GS FLX Titanium instrument, was compared to the standard manual library preparation, showing higher yield, throughput and great reproducibility. In addition, 12 libraries were prepared and uniquely tagged in parallel, and the distribution of sequence reads between these indexed samples could be improved using quantitative PCR-assisted pooling.

Conclusions/Significance

We present a novel automated procedure that makes it possible to prepare 36 indexed libraries per person and day, which can be increased to up to 96 libraries processed simultaneously. The yield, speed and robust performance of the protocol constitute a substantial improvement to present manual methods, without the need of extensive equipment investments. The described procedure enables a considerable efficiency increase for small to midsize sequencing centers.     

A Bead-based Normalization for Uniform Sequencing depth (BeNUS) protocol for multi-samples sequencing exemplified by HLA-B

Background

Human leukocyte antigen (HLA) is a group of genes that are extremely polymorphic among individuals and populations and have been associated with more than 100 different diseases and adverse drug effects. HLA typing is accordingly an important tool in clinical application, medical research, and population genetics. We have previously developed a phase-defined HLA gene sequencing method using MiSeq sequencing.

Results

Here we report a simple, high-throughput, and cost-effective sequencing method that includes normalized library preparation and adjustment of DNA molar concentration. We applied long-range PCR to amplify HLA-B for 96 samples followed by transposase-based library construction and multiplex sequencing with the MiSeq sequencer. After sequencing, we observed low variation in read percentages (0.2% to 1.55%) among the 96 demultiplexed samples. On this basis, all the samples were amenable to haplotype phasing using our phase-defined sequencing method. In our study, a sequencing depth of 800x was necessary and sufficient to achieve full phasing of HLA-B alleles with reliable assignment of the allelic sequence to the 8 digit level.

Conclusions

Our HLA sequencing method optimized for 96 multiplexing samples is highly time effective and cost effective and is especially suitable for automated multi-sample library preparation and sequencing.

Electronic supplementary material

The online version of this article (doi:10.1186/1471-2164-15-645) contains supplementary material, which is available to authorized users.     

Identification of miRNAs in a Liver of a Human Fetus by a Modified Method

Background

miRNAs are 17–25 nucleotides long RNA molecules that have been found to regulate gene expression in human cells. There are studies showing that different groups of miRNAs are involved in development of different tissues. In hepatocytes there are reported particular types of miRNAs that regulate gene expression.

Methods

We established a human fetal liver cDNA library by a modified cloning protocol. Then plasmid isolation from the colonies was performed. After sequencing and database searching, the miRNAs were recognized. RT-PCR and sequencing were carried out to validate the miRNAs detected. Real-time PCR was used to analyze the expression of each miRNA.

Results

One novel miRNA was discovered, together with another 35 previously-known miRNAs in the fetal liver. Some of them existed in variants. The miRNAs identified were validated by RT-PCR and sequencing. Quantitative analysis showed that they have variable expression.

Conclusion

Our results indicate that a special group of miRNAs may play an important role in fetal liver development in a synergistic manner.     

Analysis of High-Throughput Sequencing and Annotation Strategies for Phage Genomes

Background

Bacterial viruses (phages) play a critical role in shaping microbial populations as they influence both host mortality and horizontal gene transfer. As such, they have a significant impact on local and global ecosystem function and human health. Despite their importance, little is known about the genomic diversity harbored in phages, as methods to capture complete phage genomes have been hampered by the lack of knowledge about the target genomes, and difficulties in generating sufficient quantities of genomic DNA for sequencing. Of the approximately 550 phage genomes currently available in the public domain, fewer than 5% are marine phage.

Methodology/Principal Findings

To advance the study of phage biology through comparative genomic approaches we used marine cyanophage as a model system. We compared DNA preparation methodologies (DNA extraction directly from either phage lysates or CsCl purified phage particles), and sequencing strategies that utilize either Sanger sequencing of a linker amplification shotgun library (LASL) or of a whole genome shotgun library (WGSL), or 454 pyrosequencing methods. We demonstrate that genomic DNA sample preparation directly from a phage lysate, combined with 454 pyrosequencing, is best suited for phage genome sequencing at scale, as this method is capable of capturing complete continuous genomes with high accuracy. In addition, we describe an automated annotation informatics pipeline that delivers high-quality annotation and yields few false positives and negatives in ORF calling.

Conclusions/Significance

These DNA preparation, sequencing and annotation strategies enable a high-throughput approach to the burgeoning field of phage genomics.     

Large scale library generation for high throughput sequencing

Background

Large efforts have recently been made to automate the sample preparation protocols for massively parallel sequencing in order to match the increasing instrument throughput. Still, the size selection through agarose gel electrophoresis separation is a labor-intensive bottleneck of these protocols.

Methodology/Principal Findings

In this study a method for automatic library preparation and size selection on a liquid handling robot is presented. The method utilizes selective precipitation of certain sizes of DNA molecules on to paramagnetic beads for cleanup and selection after standard enzymatic reactions.

Conclusions/Significance

The method is used to generate libraries for de novo and re-sequencing on the Illumina HiSeq 2000 instrument with a throughput of 12 samples per instrument in approximately 4 hours. The resulting output data show quality scores and pass filter rates comparable to manually prepared samples. The sample size distribution can be adjusted for each application, and are suitable for all high throughput DNA processing protocols seeking to control size intervals.     

Impact of Library Preparation on Downstream Analysis and Interpretation of RNA-Seq Data: Comparison between Illumina PolyA and NuGEN Ovation Protocol

Objectives

The sequencing by the PolyA selection is the most common approach for library preparation. With limited amount or degraded RNA, alternative protocols such as the NuGEN have been developed. However, it is not yet clear how the different library preparations affect the downstream analyses of the broad applications of RNA sequencing.

Methods and Materials

Eight human mammary epithelial cell (HMEC) lines with high quality RNA were sequenced by Illumina’s mRNA-Seq PolyA selection and NuGEN ENCORE library preparation. The following analyses and comparisons were conducted: 1) the numbers of genes captured by each protocol; 2) the impact of protocols on differentially expressed gene detection between biological replicates; 3) expressed single nucleotide variant (SNV) detection; 4) non-coding RNAs, particularly lincRNA detection; and 5) intragenic gene expression.

Results

Sequences from the NuGEN protocol had lower (75%) alignment rate than the PolyA (over 90%). The NuGEN protocol detected fewer genes (12–20% less) with a significant portion of reads mapped to non-coding regions. A large number of genes were differentially detected between the two protocols. About 17–20% of the differentially expressed genes between biological replicates were commonly detected between the two protocols. Significantly higher numbers of SNVs (5–6 times) were detected in the NuGEN samples, which were largely from intragenic and intergenic regions. The NuGEN captured fewer exons (25% less) and had higher base level coverage variance. While 6.3% of reads were mapped to intragenic regions in the PolyA samples, the percentages were much higher (20–25%) for the NuGEN samples. The NuGEN protocol did not detect more known non-coding RNAs such as lincRNAs, but targeted small and “novel” lincRNAs.

Conclusion

Different library preparations can have significant impacts on downstream analysis and interpretation of RNA-seq data. The NuGEN provides an alternative for limited or degraded RNA but it has limitations for some RNA-seq applications.     

Experimental validation of methods for differential gene expression analysis and sample pooling in RNA-seq

Background

Massively parallel cDNA sequencing (RNA-seq) experiments are gradually superseding microarrays in quantitative gene expression profiling. However, many biologists are uncertain about the choice of differentially expressed gene (DEG) analysis methods and the validity of cost-saving sample pooling strategies for their RNA-seq experiments. Hence, we performed experimental validation of DEGs identified by Cuffdiff2, edgeR, DESeq2 and Two-stage Poisson Model (TSPM) in a RNA-seq experiment involving mice amygdalae micro-punches, using high-throughput qPCR on independent biological replicate samples. Moreover, we sequenced RNA-pools and compared their results with sequencing corresponding individual RNA samples.

Results

False-positivity rate of Cuffdiff2 and false-negativity rates of DESeq2 and TSPM were high. Among the four investigated DEG analysis methods, sensitivity and specificity of edgeR was relatively high. We documented the pooling bias and that the DEGs identified in pooled samples suffered low positive predictive values.

Conclusions

Our results highlighted the need for combined use of more sensitive DEG analysis methods and high-throughput validation of identified DEGs in future RNA-seq experiments. They indicated limited utility of sample pooling strategies for RNA-seq in similar setups and supported increasing the number of biological replicate samples.

Electronic supplementary material

The online version of this article (doi:10.1186/s12864-015-1767-y) contains supplementary material, which is available to authorized users.     

High-Throughput Massively Parallel Sequencing for Fetal Aneuploidy Detection from Maternal Plasma

Background

Circulating cell-free (ccf) fetal DNA comprises 3–20% of all the cell-free DNA present in maternal plasma. Numerous research and clinical studies have described the analysis of ccf DNA using next generation sequencing for the detection of fetal aneuploidies with high sensitivity and specificity. We sought to extend the utility of this approach by assessing semi-automated library preparation, higher sample multiplexing during sequencing, and improved bioinformatic tools to enable a higher throughput, more efficient assay while maintaining or improving clinical performance.

Methods

Whole blood (10mL) was collected from pregnant female donors and plasma separated using centrifugation. Ccf DNA was extracted using column-based methods. Libraries were prepared using an optimized semi-automated library preparation method and sequenced on an Illumina HiSeq2000 sequencer in a 12-plex format. Z-scores were calculated for affected chromosomes using a robust method after normalization and genomic segment filtering. Classification was based upon a standard normal transformed cutoff value of z = 3 for chromosome 21 and z = 3.95 for chromosomes 18 and 13.

Results

Two parallel assay development studies using a total of more than 1900 ccf DNA samples were performed to evaluate the technical feasibility of automating library preparation and increasing the sample multiplexing level. These processes were subsequently combined and a study of 1587 samples was completed to verify the stability of the process-optimized assay. Finally, an unblinded clinical evaluation of 1269 euploid and aneuploid samples utilizing this high-throughput assay coupled to improved bioinformatic procedures was performed. We were able to correctly detect all aneuploid cases with extremely low false positive rates of 0.09%, <0.01%, and 0.08% for trisomies 21, 18, and 13, respectively.

Conclusions

These data suggest that the developed laboratory methods in concert with improved bioinformatic approaches enable higher sample throughput while maintaining high classification accuracy.     

AllelicImbalance: an R/ bioconductor package for detecting,managing, and visualizing allele expression imbalance data from RNA sequencing

Background

One aspect in which RNA sequencing is more valuable than microarray-based methods is the ability to examine the allelic imbalance of the expression of a gene. This process is often a complex task that entails quality control, alignment, and the counting of reads over heterozygous single-nucleotide polymorphisms. Allelic imbalance analysis is subject to technical biases, due to differences in the sequences of the measured alleles. Flexible bioinformatics tools are needed to ease the workflow while retaining as much RNA sequencing information as possible throughout the analysis to detect and address the possible biases.

Results

We present AllelicImblance, a software program that is designed to detect, manage, and visualize allelic imbalances comprehensively. The purpose of this software is to allow users to pose genetic questions in any RNA sequencing experiment quickly, enhancing the general utility of RNA sequencing. The visualization features can reveal notable, non-trivial allelic imbalance behavior over specific regions, such as exons.

Conclusions

The software provides a complete framework to perform allelic imbalance analyses of aligned RNA sequencing data, from detection to visualization, within the robust and versatile management class, ASEset.

Electronic supplementary material

The online version of this article (doi:10.1186/s12859-015-0620-2) contains supplementary material, which is available to authorized users.     

HyLiTE: accurate and flexible analysis of gene expression in hybrid and allopolyploid species

Background

Forming a new species through the merger of two or more divergent parent species is increasingly seen as a key phenomenon in the evolution of many biological systems. However, little is known about how expression of parental gene copies (homeologs) responds following genome merger. High throughput RNA sequencing now makes this analysis technically feasible, but tools to determine homeolog expression are still in their infancy.

Results

Here we present HyLiTE – a single-step analysis to obtain tables of homeolog expression in a hybrid or allopolyploid and its parent species directly from raw mRNA sequence files. By implementing on-the-fly detection of diagnostic parental polymorphisms, HyLiTE can perform SNP calling and read classification simultaneously, thus allowing HyLiTE to be run as parallelized code. HyLiTE accommodates any number of parent species, multiple data sources (including genomic DNA reads to improve SNP detection), and implements a statistical framework optimized for genes with low to moderate expression.

Conclusions

HyLiTE is a flexible and easy-to-use program designed for bench biologists to explore patterns of gene expression following genome merger. HyLiTE offers practical advantages over manual methods and existing programs, has been designed to accommodate a wide range of genome merger systems, can identify SNPs that arose following genome merger, and offers accurate performance on non-model organisms.

Electronic supplementary material

The online version of this article (doi:10.1186/s12859-014-0433-8) contains supplementary material, which is available to authorized users.