Iterative sequence/secondary structure search for protein homologs: comparison with amino acid sequence alignments and application to fold recognition in genome databases

MOTIVATION: Sequence alignment techniques have been developed into extremely powerful tools for identifying the folding families and function of proteins in newly sequenced genomes. For a sufficiently low sequence identity it is necessary to incorporate additional structural information to positively detect homologous proteins. We have carried out an extensive analysis of the effectiveness of incorporating secondary structure information directly into the alignments for fold recognition and identification of distant protein homologs. A secondary structure similarity matrix based on a database of three-dimensionally aligned proteins was first constructed. An iterative application of dynamic programming was used which incorporates linear combinations of amino acid and secondary structure sequence similarity scores. Initially, only primary sequence information is used. Subsequently contributions from secondary structure are phased in and new homologous proteins are positively identified if their scores are consistent with the predetermined error rate. RESULTS: We used the SCOP40 database, where only PDB sequences that have 40% homology or less are included, to calibrate homology detection by the combined amino acid and secondary structure sequence alignments. Combining predicted secondary structure with sequence information results in a 8-15% increase in homology detection within SCOP40 relative to the pairwise alignments using only amino acid sequence data at an error rate of 0.01 errors per query; a 35% increase is observed when the actual secondary structure sequences are used. Incorporating predicted secondary structure information in the analysis of six small genomes yields an improvement in the homology detection of approximately 20% over SSEARCH pairwise alignments, but no improvement in the total number of homologs detected over PSI-BLAST, at an error rate of 0.01 errors per query. However, because the pairwise alignments based on combinations of amino acid and secondary structure similarity are different from those produced by PSI-BLAST and the error rates can be calibrated, it is possible to combine the results of both searches. An additional 25% relative improvement in the number of genes identified at an error rate of 0.01 is observed when the data is pooled in this way. Similarly for the SCOP40 dataset, PSI-BLAST detected 15% of all possible homologs, whereas the pooled results increased the total number of homologs detected to 19%. These results are compared with recent reports of homology detection using sequence profiling methods. AVAILABILITY: Secondary structure alignment homepage at http://lutece.rutgers.edu/ssas CONTACT: anders@rutchem.rutgers.edu; ronlevy@lutece.rutgers.edu Supplementary Information: Genome sequence/structure alignment results at http://lutece.rutgers.edu/ss_fold_predictions.     

Improving taxonomy-based protein fold recognition by using global and local features

Fold recognition from amino acid sequences plays an important role in identifying protein structures and functions. The taxonomy-based method, which classifies a query protein into one of the known folds, has been shown very promising for protein fold recognition. However, extracting a set of highly discriminative features from amino acid sequences remains a challenging problem. To address this problem, we developed a new taxonomy-based protein fold recognition method called TAXFOLD. It extensively exploits the sequence evolution information from PSI-BLAST profiles and the secondary structure information from PSIPRED profiles. A comprehensive set of 137 features is constructed, which allows for the depiction of both global and local characteristics of PSI-BLAST and PSIPRED profiles. We tested TAXFOLD on four datasets and compared it with several major existing taxonomic methods for fold recognition. Its recognition accuracies range from 79.6 to 90% for 27, 95, and 194 folds, achieving an average 6.9% improvement over the best available taxonomic method. Further test on the Lindahl benchmark dataset shows that TAXFOLD is comparable with the best conventional template-based threading method at the SCOP fold level. These experimental results demonstrate that the proposed set of features is highly beneficial to protein fold recognition.     

BCL::Align—Sequence alignment and fold recognition with a custom scoring function online

BCL::Align is a multiple sequence alignment tool that utilizes the dynamic programming method in combination with a customizable scoring function for sequence alignment and fold recognition. The scoring function is a weighted sum of the traditional PAM and BLOSUM scoring matrices, position-specific scoring matrices output by PSI-BLAST, secondary structure predicted by a variety of methods, chemical properties, and gap penalties. By adjusting the weights, the method can be tailored for fold recognition or sequence alignment tasks at different levels of sequence identity. A Monte Carlo algorithm was used to determine optimized weight sets for sequence alignment and fold recognition that most accurately reproduced the SABmark reference alignment test set. In an evaluation of sequence alignment performance, BCL::Align ranked best in alignment accuracy (Cline score of 22.90 for sequences in the Twilight Zone) when compared with Align-m, ClustalW, T-Coffee, and MUSCLE. ROC curve analysis indicates BCL::Align's ability to correctly recognize protein folds with over 80% accuracy. The flexibility of the program allows it to be optimized for specific classes of proteins (e.g. membrane proteins) or fold families (e.g. TIM-barrel proteins). BCL::Align is free for academic use and available online at http://www.meilerlab.org/.     

BCL::Align-sequence alignment and fold recognition with a custom scoring function online

BCL::Align is a multiple sequence alignment tool that utilizes the dynamic programming method in combination with a customizable scoring function for sequence alignment and fold recognition. The scoring function is a weighted sum of the traditional PAM and BLOSUM scoring matrices, position-specific scoring matrices output by PSI-BLAST, secondary structure predicted by a variety of methods, chemical properties, and gap penalties. By adjusting the weights, the method can be tailored for fold recognition or sequence alignment tasks at different levels of sequence identity. A Monte Carlo algorithm was used to determine optimized weight sets for sequence alignment and fold recognition that most accurately reproduced the SABmark reference alignment test set. In an evaluation of sequence alignment performance, BCL::Align ranked best in alignment accuracy (Cline score of 22.90 for sequences in the Twilight Zone) when compared with Align-m, ClustalW, T-Coffee, and MUSCLE. ROC curve analysis indicates BCL::Align's ability to correctly recognize protein folds with over 80% accuracy. The flexibility of the program allows it to be optimized for specific classes of proteins (e.g. membrane proteins) or fold families (e.g. TIM-barrel proteins). BCL::Align is free for academic use and available online at http://www.meilerlab.org/.     

Protein homology detection and fold inference through multiple alignment entropy profiles

Homology detection and protein structure prediction are central themes in bioinformatics. Establishment of relationship between protein sequences or prediction of their structure by sequence comparison methods finds limitations when there is low sequence similarity. Recent works demonstrate that the use of profiles improves homology detection and protein structure prediction. Profiles can be inferred from protein multiple alignments using different approaches. The "Conservatism-of-Conservatism" is an effective profile analysis method to identify structural features between proteins having the same fold but no detectable sequence similarity. The information obtained from protein multiple alignments varies according to the amino acid classification employed to calculate the profile. In this work, we calculated entropy profiles from PSI-BLAST-derived multiple alignments and used different amino acid classifications summarizing almost 500 different attributes. These entropy profiles were converted into pseudocodes which were compared using the FASTA program with an ad-hoc matrix. We tested the performance of our method to identify relationships between proteins with similar fold using a nonredundant subset of sequences having less than 40% of identity. We then compared our results using Coverage Versus Error per query curves, to those obtained by methods like PSI-BLAST, COMPASS and HHSEARCH. Our method, named HIP (Homology Identification with Profiles) presented higher accuracy detecting relationships between proteins with the same fold. The use of different amino acid classifications reflecting a large number of amino acid attributes, improved the recognition of distantly related folds. We propose the use of pseudocodes representing profile information as a fast and powerful tool for homology detection, fold assignment and analysis of evolutionary information enclosed in protein profiles.     

一个识别蛋白质折叠模式的SVM分类器

蛋白质折叠模式识别是一种分析蛋白质结构的重要方法。以序列相似性较低的蛋白质为训练集,提取蛋白质序列信息频数及疏水性等信息作为折叠类型特征,从SCOP数据库中已分类蛋白质构建1 393种折叠模式的数据集,采用SVM预测蛋白质1 393种折叠模式。封闭测试准确率达99.612 2%,基于SCOP的开放测试准确率达79.632 9%。基于另一个权威测试集的开放测试折叠准确率达64.705 9%,SCOP类准确率达76.470 6%,可以有效地对蛋白质折叠模式进行预测,从而为蛋白质从头预测提供参考。     

Combination of threading potentials and sequence profiles improves fold recognition

Using a benchmark set of structurally similar proteins, we conduct a series of threading experiments intended to identify a scoring function with an optimal combination of contact-potential and sequence-profile terms. The benchmark set is selected to include many medium-difficulty fold recognition targets, where sequence similarity is undetectable by BLAST but structural similarity is extensive. The contact potential is based on the log-odds of non-local contacts involving different amino acid pairs, in native as opposed to randomly compacted structures. The sequence profile term is that used in PSI-BLAST. We find that combination of these terms significantly improves the success rate of fold recognition over use of either term alone, with respect to both recognition sensitivity and the accuracy of threading models. Improvement is greatest for targets between 10 % and 20 % sequence identity and 60 % to 80 % superimposable residues, where the number of models crossing critical accuracy and significance thresholds more than doubles. We suggest that these improvements account for the successful performance of the combined scoring function at CASP3. We discuss possible explanations as to why sequence-profile and contact-potential terms appear complementary.     

Functional annotation of proteomic sequences based on consensus of sequence and structural analysis

To maximise the assignment of function of the proteins encoded by a genome and to aid the search for novel drug targets, there is an emerging need for sensitive methods of predicting protein function on a genome-wide basis. GeneAtlas is an automated, high-throughput pipeline for the prediction of protein structure and function using sequence similarity detection, homology modelling and fold recognition methods. GeneAtlas is described in detail here. To test GeneAtlas, a 'virtual' genome was used, a subset of PDB structures from the SCOP database, in which the functional relationships are known. GeneAtlas detects additional relationships by building 3D models in comparison with the sequence searching method PSI-BLAST. Functionally related proteins with sequence identity below the twilight zone can be recognised correctly.     

FROST: a filter-based fold recognition method

To assess the reliability of fold assignments to protein sequences, we developed a fold recognition method called FROST (Fold Recognition-Oriented Search Tool) based on a series of filters and a database specifically designed as a benchmark for this new method under realistic conditions. This benchmark database consists of proteins for which there exists, at least, another protein with an extensively similar 3D structure in a database of representative 3D structures (i.e., more than 65% of the residues in both proteins can be structurally aligned). Because the testing of our method must be carried out under conditions similar to those of real fold recognition experiments, no protein pair with sequence similarity detectable using standard sequence comparison methods such as FASTA is included in the benchmark database. While using FROST, we achieved a coverage of 60% for a rate of error of 1%. To obtain a baseline for our method, we used PSI-BLAST and 3D-PSSM. Under the same conditions, for a 1% error rate, coverages for PSI-BLAST and 3D-PSSM were 33 and 56%, respectively.     

PFRES: protein fold classification by using evolutionary information and predicted secondary structure

MOTIVATION: The number of protein families has been estimated to be as small as 1000. Recent study shows that the growth in discovery of novel structures that are deposited into PDB and the related rate of increase of SCOP categories are slowing down. This indicates that the protein structure space will be soon covered and thus we may be able to derive most of remaining structures by using the known folding patterns. Present tertiary structure prediction methods behave well when a homologous structure is predicted, but give poorer results when no homologous templates are available. At the same time, some proteins that share twilight-zone sequence identity can form similar folds. Therefore, determination of structural similarity without sequence similarity would be beneficial for prediction of tertiary structures. RESULTS: The proposed PFRES method for automated protein fold classification from low identity (<35%) sequences obtains 66.4% and 68.4% accuracy for two test sets, respectively. PFRES obtains 6.3-12.4% higher accuracy than the existing methods. The prediction accuracy of PFRES is shown to be statistically significantly better than the accuracy of competing methods. Our method adopts a carefully designed, ensemble-based classifier, and a novel, compact and custom-designed feature representation that includes nearly 90% less features than the representation of the most accurate competing method (36 versus 283). The proposed representation combines evolutionary information by using the PSI-BLAST profile-based composition vector and information extracted from the secondary structure predicted with PSI-PRED. AVAILABILITY: The method is freely available from the authors upon request.     

Protein threading using PROSPECT: design and evaluation

The computer system PROSPECT for the protein fold recognition using the threading method is described and evaluated in this article. For a given target protein sequence and a template structure, PROSPECT guarantees to find a globally optimal threading alignment between the two. The scoring function for a threading alignment employed in PROSPECT consists of four additive terms: i) a mutation term, ii) a singleton fitness term, iii) a pairwise-contact potential term, and iv) alignment gap penalties. The current version of PROSPECT considers pair contacts only between core (alpha-helix or beta-strand) residues and alignment gaps only in loop regions. PROSPECT finds a globally optimal threading efficiently when pairwise contacts are considered only between residues that are spatially close (7 A or less between the C(beta) atoms in the current implementation). On a test set consisting of 137 pairs of target-template proteins, each pair being from the same superfamily and having sequence identity 相似文献   

Hidden Markov models that use predicted secondary structures for fold recognition.

There are many proteins that share the same fold but have no clear sequence similarity. To predict the structure of these proteins, so called "protein fold recognition methods" have been developed. During the last few years, improvements of protein fold recognition methods have been achieved through the use of predicted secondary structures (Rice and Eisenberg, J Mol Biol 1997;267:1026-1038), as well as by using multiple sequence alignments in the form of hidden Markov models (HMM) (Karplus et al., Proteins Suppl 1997;1:134-139). To test the performance of different fold recognition methods, we have developed a rigorous benchmark where representatives for all proteins of known structure are matched against each other. Using this benchmark, we have compared the performance of automatically-created hidden Markov models with standard-sequence-search methods. Further, we combine the use of predicted secondary structures and multiple sequence alignments into a combined method that performs better than methods that do not use this combination of information. Using only single sequences, the correct fold of a protein was detected for 10% of the test cases in our benchmark. Including multiple sequence information increased this number to 16%, and when predicted secondary structure information was included as well, the fold was correctly identified in 20% of the cases. Moreover, if the correct secondary structure was used, 27% of the proteins could be correctly matched to a fold. For comparison, blast2, fasta, and ssearch identifies the fold correctly in 13-17% of the cases. Thus, standard pairwise sequence search methods perform almost as well as hidden Markov models in our benchmark. This is probably because the automatically-created multiple sequence alignments used in this study do not contain enough diversity and because the current generation of hidden Markov models do not perform very well when built from a few sequences.     

Fold recognition and accurate query-template alignment by a combination of PSI-BLAST and threading

A homology-based structure prediction method ideally gives both a correct fold assignment and an accurate query-template alignment. In this article we show that the combination of two existing methods, PSI-BLAST and threading, leads to significant enhancement in the success rate of fold recognition. The combined approach, termed COBLATH, also yields much higher alignment accuracy than found in previous studies. It consists of two-way searches both by PSI-BLAST and by threading. In the PSI-BLAST portion, a query is used to search for hits in a library of potential templates and, conversely, each potential template is used to search for hits in a library of queries. In the threading portion, the scoring function is the sum of a sequence profile and a 6x6 substitution matrix between predicted query and known template secondary structure and solvent exposure. "Two-way" in threading means that the query's sequence profile is used to match the sequences of all potential templates and the sequence profiles of all potential templates are used to match the query's sequence. When tested on a set of 533 nonhomologous proteins, COBLATH was able to assign folds for 390 (73%). Among these 390 queries, 265 (68%) had root-mean-square deviations (RMSDs) of less than 8 A between predicted and actual structures. Such high success rate and accuracy make COBLATH an ideal tool for structural genomics.     

Multi-class protein fold recognition using support vector machines and neural networks

MOTIVATION: Protein fold recognition is an important approach to structure discovery without relying on sequence similarity. We study this approach with new multi-class classification methods and examined many issues important for a practical recognition system. RESULTS: Most current discriminative methods for protein fold prediction use the one-against-others method, which has the well-known 'False Positives' problem. We investigated two new methods: the unique one-against-others and the all-against-all methods. Both improve prediction accuracy by 14-110% on a dataset containing 27 SCOP folds. We used the Support Vector Machine (SVM) and the Neural Network (NN) learning methods as base classifiers. SVMs converges fast and leads to high accuracy. When scores of multiple parameter datasets are combined, majority voting reduces noise and increases recognition accuracy. We examined many issues involved with large number of classes, including dependencies of prediction accuracy on the number of folds and on the number of representatives in a fold. Overall, recognition systems achieve 56% fold prediction accuracy on a protein test dataset, where most of the proteins have below 25% sequence identity with the proteins used in training.     

Exploring the sequence-structure protein landscape in the glycosyltransferase family

To understand the molecular basis of glycosyltransferases' (GTFs) catalytic mechanism, extensive structural information is required. Here, fold recognition methods were employed to assign 3D protein shapes (folds) to the currently known GTF sequences, available in public databases such as GenBank and Swissprot. First, GTF sequences were retrieved and classified into clusters, based on sequence similarity only. Intracluster sequence similarity was chosen sufficiently high to ensure that the same fold is found within a given cluster. Then, a representative sequence from each cluster was selected to compose a subset of GTF sequences. The members of this reduced set were processed by three different fold recognition methods: 3D-PSSM, FUGUE, and GeneFold. Finally, the results from different fold recognition methods were analyzed and compared to sequence-similarity search methods (i.e., BLAST and PSI-BLAST). It was established that the folds of about 70% of all currently known GTF sequences can be confidently assigned by fold recognition methods, a value which is higher than the fold identification rate based on sequence comparison alone (48% for BLAST and 64% for PSI-BLAST). The identified folds were submitted to 3D clustering, and we found that most of the GTF sequences adopt the typical GTF A or GTF B folds. Our results indicate a lack of evidence that new GTF folds (i.e., folds other than GTF A and B) exist. Based on cases where fold identification was not possible, we suggest several sequences as the most promising targets for a structural genomics initiative focused on the GTF protein family.     

Protein fold recognition using sequence-derived predictions.

In protein fold recognition, one assigns a probe amino acid sequence of unknown structure to one of a library of target 3D structures. Correct assignment depends on effective scoring of the probe sequence for its compatibility with each of the target structures. Here we show that, in addition to the amino acid sequence of the probe, sequence-derived properties of the probe sequence (such as the predicted secondary structure) are useful in fold assignment. The additional measure of compatibility between probe and target is the level of agreement between the predicted secondary structure of the probe and the known secondary structure of the target fold. That is, we recommend a sequence-structure compatibility function that combines previously developed compatibility functions (such as the 3D-1D scores of Bowie et al. [1991] or sequence-sequence replacement tables) with the predicted secondary structure of the probe sequence. The effect on fold assignment of adding predicted secondary structure is evaluated here by using a benchmark set of proteins (Fischer et al., 1996a). The 3D structures of the probe sequences of the benchmark are actually known, but are ignored by our method. The results show that the inclusion of the predicted secondary structure improves fold assignment by about 25%. The results also show that, if the true secondary structure of the probe were known, correct fold assignment would increase by an additional 8-32%. We conclude that incorporating sequence-derived predictions significantly improves assignment of sequences to known 3D folds. Finally, we apply the new method to assign folds to sequences in the SWISSPROT database; six fold assignments are given that are not detectable by standard sequence-sequence comparison methods; for two of these, the fold is known from X-ray crystallography and the fold assignment is correct.