Estimation of the ferrous-transferrin binding constants based on thermodynamic studies of nickel(II)-transferrin

The equilibrium constants for the binding of Ni2+ to human serum transferrin in 0.01 M hepes containing 5 mM sodium bicarbonate at 25 degrees C and pH 7.4 have been measured. The effective binding constants are log K1 = 4.10 +/- 0.15 and log K2 = 3.23 +/- 0.31 for the reactions Ni2+ + apoTr (K1) in equilibrium Ni2+-Tr. Ni2+ + Ni2+-Tr (K2) in equilibrium Ni2+-Tr-Ni2+ where the explicit terms for bicarbonate and hydrogen ion have been incorporated into the effective binding constants. Titration of both forms of mono(ferric)transferrin indicates that unlike other metal ions, Ni2+ binds preferentially to the N-terminal binding site, but that the site preference is rather small. A linear-free-energy relationship (LFER) for the complexation of Ni2+ and Fe2+ has been prepared. This LFER has been used to estimate effective binding constants of log K1 = 3.2 and log K2 = 2.5 for the ferrous-transferrin complex. These ferrous constants have been combined with the literature binding constants for ferric-transferrin to estimate formal reduction potentials of -340 mV vs. NHE for the C-terminal site and -280 mV for the N-terminal site.     

Iron(III) complexation by Vanchrobactin, a siderophore of the bacterial fish pathogen Vibrio anguillarum

The bacterial fish pathogen Vibrio anguillarum serotype O2 strain RV22 produces the mono catecholate siderophore Vanchrobactin (Vb) under conditions of iron deficiency. Vb contains two potential bidentate coordination sites: catecholate and salicylate groups. The iron(III) coordination properties of Vb is investigated in aqueous solutions using spectrophotometric and potentiometric methods. The stepwise equilibrium constants (log?K) for successive addition of Vb dianion to a ferric ion are 19.9; 13.3, and 9.5, respectively, for an overall association constant of 42.7. Based on the previous results, we estimated the equilibrium concentration of free iron(III) under physiological conditions for pH 7.4 solution containing 10(-6) M total iron and 10(-5) M total Vb as pFe = 20 (=-log[Fe(3+)]). The Vb model compounds catechol (Cat) and 2,4-dihydroxy-N-(2-hydroxyethyl)benzamide (Dhb) have also been examined, and the obtained results show that the interaction of the whole system of Vb that contains the ferric-chelating groups of both Dhb and Cat, is synergically greater than the separate parts; i.e. Vb is the best chelating agent either in acid or basic media. In summary, bacteria employing Vb-mediated iron transport thus are able to compete effectively for iron with other microorganisms within which they live.     

Thyroxine-protein interactions. Interaction of thyroxine and triiodothyronine with human thyroxine-binding globulin.

The effect of temperature on the binding of thyroxine and triiodothyronine to thyroxine-binding globulin has been studied by equilibrium dialysis. Inclusion of ovalbumin in the dialysis mixture stabilized thyroxine-binding globulin against losses in binding activity which had been found to occur during equilibrium dialysis. Ovalbumin by itself bound the thyroid hormones very weakly and its binding could be neglected when analyzing the experimental results. At pH 7.4 and 37 degrees in 0.06 M potassium phosphate/0.7 mM EDTA buffer, thyroxine was bound to thyroxine-binding globulin at a single binding site with apparent association constants: at 5 degrees, K = 4.73 +/- 0.38 X 10(10) M-1; at 25 degrees, K = 1.55 +/- 0.17 X 10(10) M-1; and at 37 degrees, K = 9.08 +/- 0.62 X 10(9) M-1. Scatchard plots of the binding data for triiodothyronine indicated that the binding of this compound to thyroxine-binding globulin was more complex than that found for thyroxine. The data for triiodothyronine binding could be fitted by asuming the existence of two different classes of binding sites. At 5 degrees and pH 7.4 nonlinear regression analysis of the data yielded the values n1 = 1.04 +/- 0.10, K1 = 3.35 +/- 0.63 X 10(9) M-1 and n2 = 1.40 +/- 0.08, K2 = 0.69 +/- 0.20 X 10(8) M-1. At 25 degrees, the values for the binding constants were n1 = 1.04 +/- 0.38, K1 = 6.5 +/- 2.8 X 10(8) M-1 and n2 = 0.77 +/- 0.22, K2 = 0.43 +/- 0.62 X 10(8) M-1. At 37 degrees where less curvature was observed, the estimated binding constants were n1 = 1.02 +/- 0.06, K1 = 4.32 +/- 0.59 X 10(8) M-1 and n2K2 = 0.056 +/- 0.012 X 10(8) M-1. When n1 was fixed at 1, the resulting values obtained for the other three binding constants were at 25 degrees, K1 = 6.12 +/- 0.35 X 10(8) M-1, n2 = 0.72 +/- 0.18, K2 = 0.73 +/- 0.36 X 10(8) M-1; and at 37 degrees K1 = 3.80 +/- 0.22 X 10(8) M-1, n2 = 0.44 +/- 0.22, and K2 = 0.43 +/- 0.38 X 10(8) M-1. The thermodynamic values for thyroxine binding to thyroxine-binding globulin at 37 degrees and pH 7.4 were deltaG0 = -14.1 kcal/mole, deltaH0 = -8.96 kcal/mole, and deltaS0 = +16.7 cal degree-1 mole-1. For triiodothyronine at 37 degrees, the thermodynamic values for binding at the primary binding site were deltaG0 = -12.3 kcal/mole, deltaH0 = -11.9 kcal/mole, and deltaS0 = +1.4 cal degree-1 mole-1. Measurement of the pH dependence of binding indicated that both thyroxine and triiodothyronine were bound maximally in the region of physiological pH, pH 6.8 to 7.7.     

Thermodynamics of the binding of galactopyranoside derivatives to the basic lectin from winged bean (Psophocarpus tetrogonolobus).

The thermodynamics of the binding of D-galactopyranoside (Gal), 2-acetamido-2-deoxygalactopyranoside (GalNAc), methyl-alpha-D-galactopyranoside, and methyl-beta-D-galactopyranoside to the basic agglutinin from winged bean (WBAI) in 0.02 M sodium phosphate and 0.15 M sodium chloride buffer have been investigated from 298.15 to 333.15 K by titration calorimetry and at the denaturation temperature by differential scanning calorimetry (DSC). WBAI is a dimer with two binding sites. The titration calorimetry yielded single-site binding constants ranging from 0.56 +/- 0.14 x 10(3) M-1 for Gal at 323.15 K to 7.2 +/- 0.5 x 10(3) M-1 for GalNAc at 298.15 K and binding enthalpies ranging from -28.0 +/- 2.0 kJ mol-1 for GalNAc at 298.15 K to -14.3 +/- 0.1 kJ mol-1 for methyl-beta-D-galactopyranoside at 322.65 K. The denaturation transition consisted of two overlapping peaks over the pH range 5.6-7.4. Fits of the differential scanning calorimetry data to a two-state transition model showed that the low temperature transition (341.6 +/- 0.4 K at pH 7.4) consisted of two domains unfolding as a single entity while the higher temperature transition (347.8 +/- 0.6 K at pH 7.4) is of the remaining WBAI dimer unfolding into two monomers. Both transitions shift to higher temperatures and higher calorimetric enthalpies with increase in added ligand concentration at pH 7.4. Analysis of the temperature increase as a function of added ligand concentration suggests that one ligand binds to the two domains unfolding at 341.6 +/- 0.6 K and one ligand binds to the domain unfolding at 347.8 +/- 0.6 K.     

Aqueous and solid complexes of iron(III) with hyaluronic acid. Potentiometric titrations and infrared spectroscopy studies

The coordination of iron(III) ion to hyaluronic acid (Hyal) in aqueous solutions and solid state was accomplished by potentiometric titrations and infrared spectroscopy. The potentiometric titration studies provided the binding constants for the complexes found in the systems and the speciation of these species according to the variation of pH values. The complexes found presented a complexing ability through both the chelating moieties of Hyal (via the N-glucosamine and D-glucoronic acid), showing no special preference for either one while in solid state, but when in aqueous solution the complexation via the N-glucosamine moiety was the preferred, forming two complexed species, ML and ML(2) (log K(ML)=8.2 and log K(ML2)=7.9). The presence of a mu-oxo complex via the D-glucoronic acid was also detected in both aqueous (log K=6.7) and solid states via the N-glucosamine and D-glucoronic acid simultaneously linked to two Hyal chains. A structure for this latter complex was suggested. The results indicated that these complexes could be used in eliminating the excess iron(III) in living organisms.     

Electrophoretic investigation of interactions of sanguinarine and chelerythrine with molecules containing mercapto group

Using mercaptoethanol and (L)-cysteine as representatives of mercapto compounds and capillary zone electrophoresis as experimental technique, it was evidenced that sanguinarine and chelerythrine do not react with the mercapto group of organic compounds at pH 7.4. Their interaction is fast and reversible complexation based on non-bonding intermolecular interaction in which enter uncharged forms of sanguinarine or chelerythrine. A negatively charged group, either bound to the mercapto ligand or supplied from solution, participates in the complexation. Simple 1:1 interaction scheme reported in literature holds therefore only for mercapto compounds bearing anionic group. Stoichiometric binding constants corrected for the abundance of the uncharged alkaloid form at pH 7.4 are of the order of magnitude of 10(4) l/mol and depend on both cations and anions of the background electrolyte. Interaction of sanguinarine and chelerythrine with human or bovine serum albumins does not qualitatively differ from their interaction with simple mercapto compounds. Stoichiometric binding constants for the binding of sanguinarine with human and bovine serum albumins in sodium phosphate buffer pH 7.4, corrected for the abundance of the interacting uncharged form, are 332,000+/-38,400 and 141,000+/-14,400 l/mol, respectively. The former agrees well with the value K=385,000 (or log K=5.59) from static photometric experiments. Constants for the complexation of uncharged chelerythrine with human and bovine serum albumins are 2,970,000+/-360,000 and 1,380,000+/-22,600 l/mol, respectively.     

Spectral studies on aluminum ion binding to the ligands with phenolic group(s): implications for the differences between N- and C-terminal binding sites of human serum apotransferrin

Both the binding and releasing of ferric ions in C-, and N-terminal binding sites of human serum transferrin are different. To understand the difference here the interactions of aluminum with the ligands containing phenolic group(s), including 8-hydroxyquinoline, salicylic acid, N,N'-di(2-hydroxybenzyl)ethylenediamine-N,N'-diacetic acid, N,N'-ethylenebis[2-(o-hydroxyphenolic)glycine], and human serum apotransferrin, respectively, are investigated by using UV difference and fluorescence spectra methods in 0.1 M N-2-hydroxyethylpiperazine-N-2-ethanesulfonic acid at pH 7.4. Aluminum binding produces a UV difference peak near 235 nm that is characteristic of phenolic groups binding to aluminum. The peak at 235 nm has been used to determine conditional binding constants of log K(Al-HBED)=8.88+/-0.74 and log K(Al-EHPG)=9.38+/-0.03. However, the effects of aluminum binding on the fluorescence intensity of N,N'-ethylenebis[2-(o-hydroxyphenolic)glycine], salicylic acid and N,N'-di(2-hydroxybenzyl) ethylenediamine-N,N'-diacetic acid, 8-hydroxyquinoline are disparate, the former showing a decrease and the latter an increase. At pH 7.4, there is N cdots, three dots, centered H-O type intramolecular hydrogen bond in 8-hydroxyquinoline, N,N'-di(2-hydroxybenzyl) ethylenediamine-N,N'-diacetic acid and O cdots, three dots, centered H-O type intramolecular hydrogen bond in salicylic acid, N,N'-ethylenebis[2-(o-hydroxyphenolic)glycine]. The effects of salts on the fluorescence intensity of the ligands containing phenolic group(s) show that fluorescence emission increases with the breaking of an N cdots, three dots, centered H-O type intramolecular hydrogen bond and fluorescence emission decreases with the breaking of an O cdots, three dots, centered H-O type intramolecular hydrogen bond. Fluorescence titrations of apotransferrin and both forms of monoferric transferrin with aluminum indicated that there is O cdots, three dots, centered H-O type intramolecular hydrogen bonds for the phenolic groups of Tyr426 and Tyr517 in the C-terminal binding site. While N cdots, three dots, centered H-O type intramolecular hydrogen bonds are found for the phenolic groups of Tyr95 and Tyr188 in the N-terminal binding site.     

The iron-binding properties of aminochelin, the mono(catecholamide) siderophore of Azotobacter vinelandii

Azotobacter vinelandii produces siderophores with different metal-binding properties, depending on the concentration of Fe(III) and molybdate in the growth medium. The three protonation constants of the mono(catecholamide) siderophore aminochelin were determined by simultaneous spectrophotometric and potentiometric titrations as log K(1)=12.1, log K(2)=10.22 and log K(3)=7.04. Based on the two catechol protonation constants, log K(1) and log K(3), the overall stability constant of the aminochelin iron 3:1 complex was found to be log beta(3)=41.3, resulting in a pFe(3+) value of 17.6 at pH 7.45. In order to further investigate the properties of the siderophore, the solubilization of Fe(III) hydroxide by a 8x10(-4) M solution of aminochelin at pH 7 and 25 degrees C was followed spectrophotometrically in the absence and in the presence of molybdate. It was observed that the addition of molybdate resulted in a significant delay in the solubilization.     

Site selectivity in the binding of inorganic anions to serum transferrin

Equilibrium constants for the sequential binding of two anions at the specific metal-binding sites of apotransferrin have been measured by difference ultraviolet spectroscopy in 0.1 M N-2-hydroxyethylpiperazine-N'-2-ethanesulfonic acid (Hepes) at pH 7.4 and 25 degrees C. Log K1 values for phosphate, phosphite, sulfate, and arsenate fall in the narrow range of 3.5-4.0, while the log K1 for bicarbonate is 2.73. No binding is observed for nitrate, perchlorate, or borate. A dinegative charge appears to be the most important criterion for anion binding. Equilibrium constants have also been measured for binding of anions to both forms of mono(ferric)transferrin. There appears to be a very small site selectivity (0.2 to 0.4 log units) for phosphate, arsenate, and phosphite that favors binding to the N-terminal site, but there is no detectable selectivity for binding of sulfate or bicarbonate. Comparison of the binding affinities and anion selectivity with literature data on anion-binding to protonated macrocyles and cryptates strongly supports the existence of specific anion-binding sites on the protein. Binding constants were also measured in 0.01 M Hepes. The anionic sulfonate group of the buffer appears to have a small effect on anion binding.     

Equilibrium studies on the binding of cadmium(II) to human serum transferrin

The binding of cadmium(II) to human serum transferrin in 0.01 M N-(2-hydroxyethyl)-piperazine-N'-2-ethanesulfonic acid with 5 mM bicarbonate at 25 degrees C has been evaluated by difference ultraviolet spectroscopy. Equilibrium constants were determined by competition versus three different low molecular weight chelating agents: nitrilotriacetic acid, ethylenediamine-N,N'-diacetic acid, and triethylenetetramine. Conditional equilibrium constants for the sequential binding of two cadmium ions to transferrin under the stated experimental conditions are log K1 = 5.95 +/- 0.10 and log K2 = 4.86 +/- 0.13. A linear free energy relationship for the complexation of cadmium and zinc has been prepared by using equilibrium data on 243 complexes of these metal ions with low molecular weight ligands. The transferrin binding constants for cadmium and zinc are in good agreement with this linear free energy relationship. This indicates that the larger size of the cadmium(II) ion does not significantly hinder its binding to the protein.     

Thermodynamics of anion binding to human serum transferrin

The binding of phosphate, bicarbonate, sulfate, and vanadate to human serum transferrin has been evaluated by two difference ultraviolet spectroscopic techniques. Direct titration of apotransferrin with bicarbonate, phosphate, and sulfate produces a strong negative absorbance near 245 nm, while titration with vanadate produces a positive absorbance in this region. Least-squares refinement of the absorbance data indicates that two anions of sulfate, phosphate, and vanadate bind to each transferrin molecule but that there is detectable binding of only a single bicarbonate anion. A second method used to study the thermodynamics of anion binding was competition equilibrium between anions for binding to the transferrin. The equilibrium constant for binding of the first equivalent of vanadate was determined by competition vs. phosphate and sulfate, while the equilibrium constant for binding of the second equivalent of bicarbonate was determined by competition vs. vanadate. Anion binding was described by two equilibrium constants for the successive binding of two anions per transferrin molecule: K1 = [A-Tr]/[A][Tr] and K2 = [A-Tr-A]/[A][A-Tr] where [A] represents the free anion concentration, [Tr] represents apotransferrin concentration, and [A-Tr] and [A-Tr-A] represent the concentrations of 1:1 and 2:1 anion-transferrin complexes, respectively. The results were the following: for phosphate, log K1 = 4.19 +/- 0.03 and log K2 = 3.25 +/- 0.21; for sulfate, log K1 = 3.62 +/- 0.07 and log K2 = 2.79 +/- 0.20; for vanadate, log K1 = 7.45 +/- 0.10 and log K2 = 6.6 +/- 0.30; for bicarbonate, log K1 = 2.66 +/- 0.07 and log K2 = 1.8 +/- 0.3.(ABSTRACT TRUNCATED AT 250 WORDS)     

Binding of vanadate to human serum transferrin

Human serum transferrin specifically and reversibly binds 2 equiv of vanadate at the two metal-binding sites of the protein. The vanadium(V)-transferrin complex can be formed either by the addition of vanadate to apotransferrin or by the air oxidation of the vanadyl(IV)-transferrin complex. The formation of the vanadium complex can be blocked by loading the apotransferrin with iron(III), and bound vanadium can be displaced from the protein by the subsequent addition of either gallium(III) or iron(III). The binding constant for the second equiv of vanadate is 10(6.5) in 0.1 M hepes, pH 7.4 at 25 degrees C. The binding constant for the first equiv of vanadate is probably very similar, although no quantitative value could be determined. Although transferrin reacts with the vanadate anion, studies on the transferrin model compound ethylenebis(o-hydroxyphenylglycine) indicate that at pH 9.5, the vanadium is binding at the metal-binding site as a dioxovanadium(V) cation coordinated to two phenolic residues at each binding site. This bound cation appears to be protonated over the pH range 9.5-6.5, as shown by changes in the difference uv spectrum of the transferrin complex, to produce an oxohydroxo species. Further decreases in the pH lead to dissociation of the vanadium-transferrin complex.     

Steric restrictions on the binding of large metal ions to serum transferrin

Apotransferrin in 0.1 M N-(2-hydroxyethyl)piperazine-N'-2-ethanesulfonic acid at 25 degrees C and pH 7.4 was titrated with acidic solutions of Lu3+, Tb3+, and Eu3+. Metal binding at the two specific metal-binding sites of transferrin was followed from changes in the difference UV spectra at 245 nm. The binding of Tb3+ was also followed from changes in the fluorescence emission spectrum at 549 nm. Apotransferrin was titrated with solutions containing varying ratios of the metal ion and the competitive chelating agent nitrilotriacetic acid, and metal-transferrin binding constants were calculated by nonlinear least-squares fits of the absorbance as a function of titrant added. The sequential carbonate-independent equilibrium constants for the binding of two metal ions are log KM1 = 11.08 and log KM2 = 7.93 for Lu3+, log KM1 = 11.20 and log KM2 = 7.61 for Tb3+, and log KM1 = 9.66 and log KM2 = 7.27 for Eu3+. Titrations of both C-terminal and N-terminal monoferric transferrins indicate that all of these metal ions bind more strongly to the C-terminal binding site. The trend in log K values as a function of the lanthanide ionic radius has been evaluated both by plots of log K versus the metal ion charge/radius ratio and by linear free-energy relationships in which binding constants for complexes of the larger lanthanides are plotted versus the binding constants for complexes with the smallest lanthanide, Lu3+. Both methods indicate that there is a sharp drop in the binding constants for the C-terminal binding site for metals larger than Tb3+. This decrease is attributed to a steric hindrance to the binding of the larger cations. The steric effect is not as strong for metal binding at the N-terminal site. As a result, the selectivity for binding to the C-terminal site, which is quite high for the smaller lanthanides, drops sharply on going from Tb3+ to Nd3+.     

Inactivation of H+,K+-ATPase by a K+-competitive photoaffinity inhibitor

A light-sensitive derivative, 2,3-dimethyl-8-[(4-azidophenyl)methoxy]imidazo[1,2-a]pyridine (DAZIP), of the drug 3-(cyanomethyl)-2-methyl-8-(phenylmethoxy)imidazo[1,2-a]pyridine (SCH 28080) has been synthesized and shown to be a K+-competitive inhibitor of gastric H+,K+-ATPase in the dark. The apparent dissociation constants calculated for DAZIP at pH 6.4 and 7.4 were 1.8 +/- 0.2 and 4.7 +/- 1.2 microM, respectively. Inhibition required binding of DAZIP to a luminal-facing site on the enzyme. Irradiation in the presence of DAZIP and 2 mM Mg2+ resulted in irreversible loss of ATPase activity that was more than 2-fold greater at pH 6.4 than at pH 7.4, showing the enhanced efficiency of covalent incorporation at the lower pH. Further photolyses were conducted at pH 6.4 in the presence of either 1,2-diaminocyclohexane-N,N,N',N'-tetraacetic acid (CDTA), ATP and CDTA, or MgATP. The specificity of light-dependent, covalent insertion of DAZIP for the site of reversible inhibition was shown both by protection against photoinactivation given by K+ (the competing ligand) and by the observation that the amount of K+-protectable photoinactivation approached a maximum limiting value as a function of DAZIP concentration. The effectiveness of K+ in protecting against photoinactivation was 100-fold greater in the presence of ATP and CDTA than in the presence of either Mg2+ or CDTA and suggests the formation of a ternary complex of the apoenzyme with ATP and tightly bound K+. The dissociation constant for DAZIP (2 microM) calculated from photolyses in the presence of MgATP without added K+ agreed with the kinetic experiments and suggests that DAZIP inhibits turnover by binding to E.MgATP.     

Studies on human lactoferrin by electron paramagnetic resonance, fluorescence, and resonance Raman spectroscopy

Investigations of metal-substituted human lactoferrins by fluorescence, resonance Raman, and electron paramagnetic resonance (EPR) spectroscopy confirm the close similarity between lactoferrin and serum transferrin. As in the case of Fe(III)- and Cu(II)-transferrin, a significant quenching of apolactoferrin's intrinsic fluorescence is caused by the interaction of Fe(III), Cu(II), Cr(III), Mn(III), and Co(III) with specific metal binding sites. Laser excitation of these same metal-lactoferrins produces resonance Raman spectral features at ca. 1605, 1505, 1275, and 1175 cm-1. These bands are characteristic of tyrosinate coordination to the metal ions as has been observed previously for serum transferins and permit the principal absorption band (lambda max between 400 and 465 nm) in each of the metal-lactoferrins to be assigned to charge transfer between the metal ion and tyrosinate ligands. Furthermore, as in serum transferrin the two metal binding sites in lactoferrin can be distinguished by EPR spectroscopy, particularly with the Cr(III)-substituted protein. Only one of the two sites in lactoferrin allows displacement of Cr(III) by Fe(III). Lactoferrin is known to differ from serum transferrin in its enhanced affinity for iron. This is supported by kinetic studies which show that the rate of uptake of Fe(III) from Fe(III)--citrate is 10 times faster for apolactoferrin than for apotransferrin. Furthermore, the more pronounced conformational change which occurs upon metal binding to lactoferrin is corroborated by the production of additional EPR-detectable Cu(II) binding sites in Mn(III)-lactoferrin. The lower pH required for iron removal from lactoferrin causes some permanent change in the protein as judged by altered rates of Fe(III) uptake and altered EPR spectra in the presence of Cu(II). Thus, the common method of producing apolactoferrin by extensive dialysis against citric acid (pH 2) appears to have an adverse effect on the protein.     

Metal binding by pyridine-2,6-bis(monothiocarboxylic acid), a biochelator produced by Pseudomonas stutzeri and Pseudomonas putida

Pyridine-2,6-bis(monothiocarboxylic acid) (pdtc),a natural metal chelator produced by Pseudomonas stutzeri and Pseudomonas putidathat promotes the degradation of carbon tetrachloride, was synthesized and studiedby potentiometric and spectrophotometric techniques. The first two stepwise protonationconstants (pK) for successive proton addition to pdtc were found to be 5.48 and2.58. The third stepwise protonation constant was estimated to be 1.3. The stability (affinity)constants for iron(III), nickel(II), and cobalt(III) were determined by potentiometric orspectrophotometric titration. The results show that pdtc has strong affinity for Fe(III)and comparable affinities for various other metals. The stability constants (log K) are 33.93 for Co(pdtc)₂ ^1-; 33.36 for Fe(pdtc)₂ ^1-; and 33.28 for Ni(pdtc)₂ ^2-. These protonationconstants and high affinity constants show that over a physiological pH range theferric pdtc complex has one of the highest effective stability constants for ironbinding among known bacterial chelators.     

Mixed Chelates of Ca(II)-Pyridine-2,6-Dicarboxylate with Some Amino Acids Related to Bacterial Spores

The high resistance of bacterial spores to heat has been repeatedly postulated to be due to stabilization of spore biopolymers by metal chelate compounds. Binding of calcium dipicolinic acid (Ca(II)-DPA) with spore proteins and amino acids has been discussed in the literature, but equilibrium data are generally lacking. By means of potentiometric pH titrations at 25 degrees C and an ionic strength of 1.0 (KNO(3)), the formation of Ca(II)-DPA (1:1 and 1:2) chelates and the interactions of Ca(II)-DPA chelate with a mole of each of three typical amino acids viz., cysteine, alanine, and glycine has been investigated. Analysis of the potentiometric data indicates that calcium and DPA forms 1:1 and 1:2 chelates with log K(ML1) = 4.39 +/- 0.01 and log K(ML2) = 2.25 +/- 0.01. In the presence of an equimolar amount of each of the amino acids under consideration, the Ca(II)-DPA chelate forms mixed ligand (ternary) chelate yielding the following stepwise stability constants: log K(1) = 4.17 +/- 0.01, log K(2) = 0.78 +/- 0.01 for cysteine, log K(1) = 4.06 +/- 0.01, log K(2) = 0.65 +/- 0.01 for alanine, and log K(1) = 4.30 +/- 0.02, log K(2) = 0.11 +/- 0.01 for glycine. Methods for calculating the stability constants of the mixed ligand system have been developed. On the basis of the potentiometric equilibrium data, possible structures for the various calcium chelate species are discussed. The data suggest that the differences in heat resistance of various strains of bacterial spores may conceivably be related to the differences in composition and stability of coordination complexes in the spore.     

Superoxide-dependent and ascorbate-dependent formation of hydroxyl radicals from hydrogen peroxide in the presence of iron. Are lactoferrin and transferrin promoters of hydroxyl-radical generation?

Apo-lactoferrin and apo-transferrin protect against iron-ion-dependent hydroxyl-radical (.OH) generation from H2O2 in the presence of superoxide radicals or ascorbic acid at pH 7.4, whether the necessary iron is added as ionic iron or as ferritin. Iron-loaded transferrin and lactoferrin [2 mol of Fe(III)/mol] show no protective ability, but do not themselves accelerate .OH production unless chelating agents are present in the reaction mixture, especially if the proteins are incorrectly loaded with iron. At acidic pH values, the protective ability of the apoproteins is diminished, and the fully iron-loaded proteins can release some iron in a form able to accelerate .OH generation. The physiological significance of these observations is discussed.     

Cyanate binding to the ferric heme octapeptide from cytochrome c. A model for anion binding to high spin ferric hemoproteins

Equilibrium constants for the binding of cyanate to the ferric heme c octapeptide in 50% ethylene glycol, 50% aqueous buffer were measured spectrophotometrically. Equilibrium constants measured at several temperatures from -20 degrees C to 0 degrees C exhibited an apparent van't Hoff relationship yielding thermodynamic values of delta Ho = -1.3 X 10(3) +/- 0.9 X 10(3) J/mol (-3.1 X 10(2) +/- 2 X 10(2) cal/mol), delta So = -3 +/- 3 J/K X mol (-0.6 +/- 0.8 cal/K X mol). The equilibrium constant for cyanate binding at 25 degrees C and pH 7.4 is 1.21 which is approximately 2 to 3 orders of magnitude lower than that observed for cyanate binding to methemoglobin and metmyoglobin. Krel, the ratio of the hemoprotein to model heme octapeptide binding constants, for NCO- is smaller than Krel for N3- suggesting that hydrogen bonding between the terminal ligand atoms and the distal histidine in hemoglobin and myoglobin does not contribute to the increased protein ligand stabilization observed for these anions relative to the model. A donor-acceptor interaction between the distal histidine and the electrophilic middle atoms of these bound ligands is proposed.