Lipid Raft Composition Modulates Sphingomyelinase Activity and Ceramide-Induced Membrane Physical Alterations

Lipid rafts and ceramide (Cer)-platforms are membrane domains that play an important role in several biological processes. Cer-platforms are commonly formed in the plasma membrane by the action of sphingomyelinase (SMase) upon hydrolysis of sphingomyelin (SM) within lipid rafts. The interplay among SMase activity, initial membrane properties (i.e., phase behavior and lipid lateral organization) and lipid composition, and the amount of product (Cer) generated, and how it modulates membrane properties were studied using fluorescence methodologies in model membranes. The activity of SMase was evaluated by following the hydrolysis of radioactive SM. It was observed that 1), the enzyme activity and extent of hydrolysis are strongly dependent on membrane physical properties but not on substrate content, and are higher in raft-like mixtures, i.e., mixtures with liquid-disordered/liquid-ordered phase separation; and 2), Cer-induced alterations are also dependent on membrane composition, specifically the cholesterol (Chol) content. In the lowest-Chol range, Cer segregates together with SM into small (∼8.5 nm) Cer/SM-gel domains. With increasing Chol, the ability of Cer to recruit SM and form gel domains strongly decreases. In the high-Chol range, a Chol-enriched/SM-depleted liquid-ordered phase predominates. Together, these data suggest that in biological membranes, Chol in particular and raft domains in general play an important role in modulating SMase activity and regulating membrane physical properties by restraining Cer-induced alterations.     

Cholesterol displacement by ceramide in sphingomyelin-containing liquid-ordered domains, and generation of gel regions in giant lipidic vesicles

Fluorescence confocal microscopy and differential scanning calorimetry are used in combination to study the phase behaviour of bilayers composed of PC:PE:SM:Chol equimolecular mixtures, in the presence or absence of 10mol% egg ceramide. In the absence of ceramide, separate liquid-ordered and liquid-disordered domains are observed in giant unilamellar vesicles. In the presence of ceramide, gel-like domains appear within the liquid-ordered regions. The melting properties of these gel-like domains resemble those of SM:ceramide binary mixtures, suggesting Chol displacement by ceramide from SM:Chol-rich liquid-ordered regions. Thus three kinds of domains coexist within a single vesicle in the presence of ceramide: gel, liquid-ordered, and liquid-disordered. In contrast, when 10mol% egg diacylglycerol is added instead of ceramide, homogeneous vesicles, consisting only of liquid-disordered bilayers, are observed.     

Lipase-catalyzed acylation of naringin with palmitic acid in highly concentrated homogeneous solutions

Acylation reactions of naringin with palmitic acid were performed by a lipase after formation of highly concentrated homogeneous solutions. Their initial naringin concentration was 840–950 mM, which is 20–60 times greater than that in organic solvent media. The overall productivity of highly concentrated solutions was more than 15 times greater than those of organic phase media. The addition of DMSO (20–40%, w/w) to substrate mixtures lowered the melting temperature of a naringin–palmitic acid mixture (1:1 molar ratio) to about 40 °C. Reactions at 80 °C apparently followed Michaelis–Menten kinetics despite extremely high substrate concentrations. As the temperature increased from 60 °C to 80 °C, the apparent viscosity of the highly concentrated solution decreased remarkably from 4.31 Pa s to 0.063 Pa s. An activation energy of 7.65 kcal/mol obtained in a range of 60–75 °C suggests a diffusion-control. On the other hand, an activation energy of 17.09 kcal/mol in a range of 75–90 °C indicates a reaction-control. The highest product conversion yield of 33% (mol/mol) was obtained in a 10 h reaction at 80 °C. Addition of activated molecular sieves to the highly concentrated solution increased the product conversion yield by 7% (mol/mol), suggesting that the original equilibrium was disrupted by removing water and then a new equilibrium was reached.     

A thermostable alkaline active endo-β-1-4-xylanase from Bacillus halodurans S7: Purification and characterization

A thermostable, alkaline active xylanase was purified to homogeneity from the culture supernatant of an alkaliphilic Bacillus halodurans S7, which was isolated from a soda lake in the Ethiopian Rift Valley. The molecular weight and the pI of this enzyme were estimated to be around 43 kDa and 4.5, respectively. When assayed at 70 °C, it was optimally active at pH 9.0–9.5. The optimum temperature for the activity was 75 °C at pH 9 and 70 °C at pH 10. The enzyme was stable over a broad pH range and showed good thermal stability when incubated at 65 °C in pH 9 buffer. The enzyme activity was strongly inhibited by Mn²⁺. Partial inhibition was also observed in the presence of 5 mM Cu²⁺, Co²⁺ and EDTA. Inhibition by Hg²⁺ and dithiothreitol was insignificant. The enzyme was free from cellulase activity and degraded xylan in an endo-fashion.     

Characteristics of galactomannanase for degrading konjac gel

Galactomannanase (Glmnase) is an enzyme product derived from Aspergillus niger. The activity of Glmnase degrading (hydrolyzing) the konjac gel were investigated. Significant loss in the enzyme activity was found when the temperature above 60 °C. Similar observations were obtained when the reaction pH above 5. Further increase in the pH value resulted in entirely loss of enzyme activity at the alkaline pH region (pH 8.0 and above). The optimal hydrolyzing temperature and pH were at 60 °C and 5.0, respectively. For the stability test, the purified Glmnase increased its thermostability up to 70 °C at pH 5.0, but it retained only about 60% activity after 60 min incubation at this temperature and its activity became zero after 20 min incubation at 80 °C. The Glmnase was stable at the pH range from 3.0 to 7.0 at room temperature and retained at least 80% activity for 60 min. For the storage temperature test, the lyophilized Glmnase still conserved about 90% activity during 7 days at 30 °C, and was higher than about 80% at 4 °C. The K_m and V_max, were 0.018 mg/ml konjac powder and 0.20 mg/ml reducing sugar per min, respectively.     

A novel spectrophotometric method for determination of kinetic constants of aldehyde oxidase using multivariate calibration method

Although phenanthridine has been frequently used as a specific substrate for the assessment of aldehyde oxidase activity, the use of this method is questionable due to a lower limit of detection and its validity for kinetic studies. In the present study, a novel sensitive multivariate calibration method based on partial least squares (PLS) has been developed for the measurement of aldehyde oxidase activity using phenanthridine as a substrate. Phenanthridine and phenanthridinone binary mixtures were prepared in a dynamic linear range of 0.1–30.0 μM and the absorption spectra of the solutions were recorded in the range of 210–280 nm in Sorenson's phosphate buffer (pH 7.0) containing EDTA (0.1 mM). The optimized PLS calibration model was used to calculate the concentration of each chemical in the prediction set. Hepatic rat aldehyde oxidase was partially purified and the initial oxidation rates of different concentrations of phenanthridine were calculated using the PLS method. The values were used for calculating Michaelis–Menten constants from a Lineweaver–Burk double reciprocal plot of initial velocity against the substrate concentration. The limits of detection for phenanthridine and phenanthridinone were found to be 0.04 ± 0.01 and 0.03 ± 0.01 μM (mean ± SD, n = 5), respectively. Using this method, the K_m value for the oxidation of phenanthridine was calculated as 1.72 ± 0.09 μM (mean ± SD, n = 3). Thus, this study describes a novel spectrophotometric method that provides a suitable, sensitive and easily applicable means of measuring the kinetics of phenanthridine oxidation by aldehyde oxidase without the need for expensive instrumentation.     

Stability of thermostable alkaline protease from Bacillus licheniformis RP1 in commercial solid laundry detergent formulations

The stability of crude extracellular protease produced by Bacillus licheniformis RP1, isolated from polluted water, in various solid laundry detergents was investigated. The enzyme had an optimum pH and temperature at pH 10.0–11.0 and 65–70 °C. Enzyme activity was inhibited by PMSF, suggesting that the preparation contains a serine-protease. The alkaline protease showed extreme stability towards non-ionic (5% Tween 20% and 5% Triton X-100) and anionic (0.5% SDS) surfactants, which retained 100% and above 73%, respectively, of its initial activity after preincubation 60 min at 40 °C.

The RP1 protease showed excellent stability and compatibility with a wide range of commercial solid detergents at temperatures from 40 to 50 °C, suggesting its further application in detergent industry. The enzyme retained 95% of its initial activity with Ariel followed by Axion (94%) then Dixan (93.5%) after preincubation 60 min at 40 °C in the presence of 7 mg/ml of detergents. In the presence of Nadhif and New Det, the enzyme retained about 83.5% of the original activity. The effects of additives such as maltodextrin, sucrose and PEG 4000 on the stability of the enzyme during spray-drying and during subsequent storage in New Det detergent were also examined. All additives tested enhanced stability of the enzyme.     

Comparison of methods to determine the degree of gelatinisation for both high and low starch concentrations

A general procedure was developed to measure the degree of gelatinisation in samples over a broad concentration range. Measurements based on birefringence, DSC (Differential scanning calorimetry), X-ray and amylose–iodine complex formation were used. If a 10 w/w % wheat starch–water mixture was used, each method resulted in approximately the same degree of gelatinisation vs. temperature curve. In case the gelatinisation of a 60 w/w % wheat starch–water mixture was followed as a function of the temperature, each method resulted in a different degree of gelatinisation vs. temperature curve. DSC and X-ray measurements are preferred, because they can be used to determine when the final stage of the gelatinisation process has been completed. Birefringence and amylose–iodine complex formation measurements are suitable alternatives if DSC and X-ray equipment is not available, but will lead to different results. The differences between the methods can be explained by considering the phenomena that take place during the gelatinisation at limiting water conditions.

Based on the experimental data obtained with DSC and X-ray measurements, the gelatinisation of 10 w/w % and 60 w/w % wheat starch–water mixtures started at the same temperature (approximately 50 °C). However, complete gelatinisation was reached at different temperatures (approximately 75 °C and 115 °C for, respectively, 10 w/w % and 60 w/w % wheat starch–water mixtures) according to the experimental DSC and X-ray data. These results are in accordance with independent DSC measurements that were carried out.

The Flory equation was adapted to provide a quantitative explanation for the curves describing the degree of starch gelatinisation as a function of the starch–water ratio and the temperature. The gelatinisation curves that were obtained with the model are in good agreement with the experimentally determined curves. The parameters , ΔH_u and χ₁₂ that resulted in the lowest sum of the squared residuals are 291 ± 63 °C, 29.2 ± 3.9 kJ/mol and 0.53 ± 0.05 (95% confidence interval). These values agree with other values reported in literature.     

Ammonia emissions during the initial phase of microbial degradation of solid and liquid cattle manure

The maximum specific ammonia emissions from liquid manure (LM) and solid manure containing 2.5 kg straw/livestock unit (LU)/day (SM 2.5) or 15 kg straw/LU/day (SM 15) increased in the sequence LM < SM 2.5 < SM 15 (662.6 < 3163.7 < 6299.8 μg NH₃–N/h/kg). These emission levels were attained soon after the maximum temperatures (22.9°C < 34.3°C < 69.5°C) induced by microbial self-heating had been reached. After that, NH₄⁺ was microbially re-bound in amounts that increased with a higher C content and a widening C:N ratio, i.e. also in the sequence LM < SM 2.5 < SM 15. Over a period of 15 to 16 days, 6.0% (LM), 10.8% (SM 2.5) and 5.9% (SM 15) of the N_total was emitted. When the accumulated ammonia emissions were extrapolated beyond this period of investigation, it was concluded that, over longer storage periods, solid manure offers better biological conditions for low ammonia emissions than liquid manure.     

The effects of temperature, pressure and peptide incorporation on ternary model raft mixtures--a Laurdan fluorescence spectroscopy study

Recently, an increasing evidence accumulated for the existence of lipid microdomains, called lipid rafts, in cell membranes, which may play an important role in many important membrane-associated biological processes. Suitable model systems for studying biophysical properties of lipid rafts are lipid vesicles composed of three-component lipid mixtures, such as POPC/SM/cholesterol, which exhibit a rich phase diagram, including raft-like liquid-ordered/liquid-disordered phase coexistence regions. We explored the temperature, pressure and concentration-dependent phase behavior of such canonical model raft mixtures using the Laurdan fluorescence spectroscopic technique. Hydrostatic pressure has not only been used as a physical parameter for studying the stability and energetics of these systems, but also because high pressure is an important feature of certain natural membrane environments. We show that the liquid-disordered/liquid-ordered phase coexistence regions of POPC/SM/cholesterol model raft mixtures extends over a very wide temperature range of about 50 degrees C. Upon pressurization, an overall ordered membrane state is reached at pressures of approximately 1,000 bar at 20 degrees C, and of approximately 2,000 bar at 40 degrees C. Incorporation of 5 mol% gramicidin as a model ion channel slightly increases the overall order parameter profile in the l(o)+l(d) two-phase coexistence region, probably by selectively partitioning into l(d) domains, does not change the overall phase behavior, however. This behavior is in contrast to the effect of the peptide incorporation into simple, one-component phospholipid bilayer systems.     

Extraction of defatted rice bran by subcritical water treatment

Defatted rice bran was treated with subcritical water in the temperature range of 180–280 °C for 5 min using 117 mL and 9 mL vessels to produce the extracts. The total sugar and protein contents and radical scavenging activity of the extracts were then estimated for both vessels. The total sugar concentration of ca. 0.3 g/L-extract was the highest for the extracts at 200 °C, and it significantly decreased at the higher temperatures. The protein concentration and radical scavenging activity were higher at the higher temperatures. Extraction was also done at 200 °C and 260 °C for various times using the small vessel. The total sugar concentration decreased with the increasing extraction time, while the protein concentration and radical scavenging activity only slightly depended on the extraction time. The extracts at 200 °C or lower temperatures using the large vessel possessed the emulsifying and emulsion-stabilizing activities. The HPLC analysis of the extract at 260 °C for 5 min using the small vessel indicated that it contained both hydrophilic and hydrophobic substances. The hydrophilic fraction of the extract mainly contained low-molecular-mass substances.     

Uracil-DNA N-glycosylase (UNG) from the marine, psychrophilic bacterium Vibrio salmonicida shows cold adapted features: A comparative analysis to Vibrio cholerae uracil-DNA N-glycosylase

The genes encoding uracil-DNA N-glycosylase (UNG) from the marine, psychrophilic bacterium Vibrio salmonicida and the mesophilic counterpart Vibrio cholerae have been cloned and expressed in Escherichia coli. The purified proteins have been characterized in order to reveal possible cold adapted features of the V. salmonicida UNG (vsUNG) compared to the V. cholerae UNG (vcUNG). Characterization experiments demonstrated that both enzymes possessed the highest activities at pH 7.0–7.5 and at salt concentrations in the range of 25–50 mM NaCl. Temperature optima for activity were determined to approximately 30 °C for vsUNG and 50 °C for vcUNG. Temperature stability of the enzymes was compared at 4 °C and 37 °C, and vsUNG was found to be more temperature labile than vcUNG. Kinetic studies performed at three different temperatures, 15 °C, 22 °C and 37 °C, demonstrated higher catalytic efficiency for vsUNG compared to vcUNG due to lower K_M-values. The increased substrate affinity of vsUNG is probably caused by an increased number of positively charged residues in the DNA-binding site of the enzyme compared to vcUNG. Thus, activity and stability measurements reveal typical cold adapted features of vsUNG.     

Rapid phase change of lipid microdomains in giant vesicles induced by conversion of sphingomyelin to ceramide

To understand the role of sphingomyelinase (SMase) in the function of biological membranes, we have investigated the effect of conversion of sphingomyelin (SM) to ceramide (Cer) on the assembly of domains in giant unilamellar vesicles (GUVs). The GUVs were prepared from mixture of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), N-palmitoly-D-erythro-sphingosine (C16Cer), N-palmitoyl-D-erythro-sphingosylphosphorylcholine (C16SM) and cholesterol. The amounts of DOPC, sum of C16Cer and C16SM, and cholesterol were kept constant (the ratio of these four lipids is shown as 1:X:1-X:1 (molar ratio), i.e., X is C16Cer/(C16Cer+C16SM)). Shape and distribution of domains formed in the GUVs were monitored by a fluorescent lipid, Texas Red 1,2-dihexadecanoyl-sn-glycero-3-phosphoethanolamine (0.1 mol%). In GUVs containing low C16Cer (X=0 and 0.25), round-shaped domains labeled by the fluorescent lipid were present, suggesting coexistence of liquid-ordered and disordered domains. In GUVs containing intermediate Cer concentration (X=0.5), the fluorescent domain covered most of GUV surface, which was surrounded by gel-like domains. Differential scanning calorimetry of multilamellar vesicles prepared in the presence of higher Cer concentration (X>or=0.5) suggested existence of a Cer-enriched gel phase. Video microscopy showed that the enzymatic conversion of SM to Cer caused rapid change in the domain structure: several minutes after the SMase addition, the fluorescent region spread over the GUV surface, within which regions with darker contrast existed. Image-based measurement of generalized polarization (GP) of 6-dodecanoyl-2-dimethylaminonaphthalene (Laurdan), which is related to the acyl chain ordering of the lipids, was performed. Before the SMase treatment domains with high (0.65) and low (below 0.4) GP values coexisted, presumably reflecting the liquid-ordered and disordered domains; after the SMase treatment regions with intermediate GP values (0.5) and smaller regions with higher GP values (0.65) were present. Generation of Cer thus caused a phase transition from liquid-ordered and disordered phases to a gel and liquid phase.     

Improved high thermal stability of pullulanase from a newly isolated thermophilic Bacillus sp. AN-7

A thermophilic Bacillus sp. strain AN-7, isolated from a soil in India, produced an extracellular pullulanase upon growth on starch–peptone medium. The enzyme was purified to homogeneity by ammonium sulfate precipitation, anion exchange and gel filtration chromatography. The optimum temperature and pH for activity was 90 °C and 6.0. With half-life time longer than one day at 80 °C the enzyme proves to be thermostable in the pH range 4.5–7.0. The pullulanase from Bacillus strain lost activity rapidly when incubated at temperature higher than 105 °C or at pH lower than 4.5. Pullulanase was completely inhibited by the Hg²⁺ ions. Ca²⁺, dithiothreitol, and Mn²⁺ stimulated the pullulanase activity. Kinetic experiments at 80 °C and pH 6.0 gave V_max and K_m values of 154 U mg⁻¹ and 1.3 mg ml⁻¹. The products of pullulan were maltotriose and maltose. This proved that the purified pullulanase (pullulan-6-glucanohydrolase, EC 3.2.1.41) from Bacillus sp. AN-7 is classified under pullulanase type I. To our knowledge, this Bacillus pullulanase is the most highly thermostable type I pullulanase known to date.     

Production and partial characterization of bacteriocin-like pepitdes by Bacillus licheniformis ZJU12

Bacillus licheniformis ZJU12, which was isolated from soil, could produce bacteriocin-like peptides that exhibited a broad spectrum of antagonistic activity against various species of Gram-positive bacteria and fungal pathogens, but not against Gram-negative bacteria tested except Xanthomonas oryzae pv. oryzae, a rice pathogen. The bacteriocin-like peptides were sensitive to proteinase K and trypsin. The activity was stable during temperature exposure up to 100 °C for 30 min, but lost completely at 121 °C for 15 min. The cell-free supernatant of B. licheniformis ZJU12 was shown to retain the activity within the pH range of 2–9, and the optimum pH for the activity was about 6.5. No adverse effect of the antagonistic compound to mice was observed in acute toxicity tests with the dose of 0.8 mg/20 g.     

Multiple phospholipid substrates of phospholipase C/sphingomyelinase HR2 from Pseudomonas aeruginosa

The activity of phospholipase C/sphingomyelinase HR₂ (PlcHR₂) from Pseudomonas aeruginosa was characterized on a variety of substrates. The enzyme was assayed on liposomes (large unilamellar vesicles) composed of PC:SM:Ch:X (1:1:1:1; mol ratio) where X could be PE, PS, PG, or CL. Activity was measured directly as disappearance of substrate after TLC lipid separation. Previous studies had suggested that PlcHR₂ was active only on PC or SM. However we found that, of the various phospholipids tested, only PS was not a substrate for PlcHR₂. All others were degraded, in an order of preference PC > SM > CL > PE > PG. PlcHR₂ activity was sensitive to the overall lipid composition of the bilayer, including non-substrate lipids.     

Young modulus of supported lipid membranes containing milk sphingomyelin in the gel,fluid or liquid-ordered phase,determined using AFM force spectroscopy

The biological membrane surrounding milk fat globules (MFGM) exhibits lateral phase separation of lipids, interpreted as gel or liquid-ordered phase sphingomyelin-rich (milk SM) domains dispersed in a fluid continuous lipid phase. The objective of this study was to investigate whether changes in the phase state of milk SM-rich domains induced by temperature (T < Tm or T > Tm) or cholesterol affected the Young modulus of the lipid membrane. Supported lipid bilayers composed of MFGM polar lipids, milk SM or milk SM/cholesterol (50:50 mol) were investigated at 20 °C and 50 °C using atomic force microscopy (AFM) and force spectroscopy. At 20 °C, gel-phase SM-rich domains and the surrounding fluid phase of the MFGM polar lipids exhibited Young modulus values of 10–20 MPa and 4–6 MPa, respectively. Upon heating at 50 °C, the milk SM-rich domains in MFGM bilayers as well as pure milk SM bilayers melted, leading to the formation of a homogeneous membrane with similar Young modulus values to that of a fluid phase (0–5 MPa). Upon addition of cholesterol to the milk SM to reach 50:50 mol%, membranes in the liquid-ordered phase exhibited Young modulus values of a few MPa, at either 20 or 50 °C. This indicated that the presence of cholesterol fluidized milk SM membranes and that the Young modulus was weakly affected by the temperature. These results open perspectives for the development of milk polar lipid based vesicles with modulated mechanical properties.     

Production of an extracellular alkaline metalloprotease from a newly isolated, moderately halophile, Salinivibrio sp. strain AF-2004

An extracellular protease was produced under stress conditions of high temperature and high salinity by a newly isolated moderate halophile, Salinivibrio sp. strain AF-2004 in a basal medium containing peptone, beef extract, glucose and NaCl. A modification of Kunitz method was used for protease assay. The isolate was capable of producing protease in the presence of sodium chloride, sodium sulfate, sodium nitrate, sodium nitrite, potassium chloride, sodium acetate and sodium citrate. The maximum protease was secreted in the presence of 7.5 to 10% (w/v) sodium sulfate or 3% (w/v) sodium acetate (4.6 U ml⁻¹). Various carbon sources including glucose, lactose, casein and peptone were capable of inducing enzyme production. The optimum pH, temperature and aeration for enzyme production were 9.0, 32 °C and 220 rpm, respectively. The enzyme production corresponded with growth and reached a maximum level during the mid-stationary phase. Maximum protease activity was exhibited in the medium containing 1% (w/v) NaCl at 60 °C, with 18% and 41% activity reductions at temperature 50 and 70 °C, respectively. The optimum pH for enzyme activity was 8.5, with 86% and 75% residual activities at pH 10 and 6, respectively. The activity of enzyme was inhibited by EDTA. These results suggest that the protease secreted by Salinivibrio sp. strain AF-2004 is industrially important from the perspectives of its activity at a broad pH ranges (5.0–10.0), its moderate thermoactivity in addition to its high tolerance to a wide range of salt concentration (0–10% NaCl).     

Characterization of sol–gel encapsulated lipase using tetraethoxysilane as precursor

Lipase from Candida rugosa was encapsulated within a chemically inert sol–gel support prepared by polycondensation of the precursor tetraethoxysilane (TEOS) in the presence of polyethylene glycol (PEG) as additive. The properties of silica and their derivatives with regard to mean pore diameter, specific surface area, mean pore size, weight loss upon heating (thermogravimetric analysis, TGA) and ²⁹Si and ¹³C NMR are reported. The pH optimum shifted from 7.8 to 6.7 and optimum temperature jumped from 36 to 60 °C upon enzyme encapsulation. Encapsulated lipase in presence of PEG (EN-PEG) exhibited higher stability in the range of 37–45 °C, but from 50 to 65 °C the EN-PEG was inactivated after seven cycles. Hydrolytic activity during long-term storage at room temperature decreased to 50% after 94 days. High diffusional resistance was observed for large oil concentration reducing hydrolytic effectiveness by 60% in the case of the encapsulated lipase. NMR, pore size and specific surface area data suggested an active participation of the lipase enzyme during gelling of the silica matrix. This lead to reduction of available Si–OH groups, larger pores and smaller surface area. Larger pores increase substrate diffusion that correlates well with higher hydrolytic activity of the TEOS–PEG sol–gel matrix encapsulated enzyme in comparison with other sol–gel supports.     

Does non-exercise activity thermogenesis contribute to non-shivering thermogenesis?

We wanted to examine if spontaneous physical activity contributes to non-shivering thermogenesis. Ten lean, healthy male subjects wore a physical activity, micro-measurement system while the room temperature was randomly altered at two hourly intervals between thermoneutral (72 °F), cool (62 °F) and warm (82 °F) temperatures. Physical activity measured during the thermoneutral, cooling and warming periods was not significantly different. Cooling increased energy expenditure above basal and thermoneutral values 2061±344 kcal/day (p<0.01). Thus, the increase in energy expenditure associated with short-term environmental cooling in lean, healthy males does not appear to be due to increased spontaneous physical activity or fidgeting.