The structure of rabbit muscle phosphoglucomutase at intermediate resolution

The three-dimensional structure of rabbit phosphoglucomutase has been determined to 2.7 A resolution by a combination of isomorphous and molecular replacement techniques. Heavy atom positions were found by using vector search and difference Fourier methods. The two molecules in the asymmetric unit form a dimer with its 2-fold axis perpendicular to and intersecting with a crystallographic 4(1) axis. Thus, the dimers are arranged so that they form fibers that are coincident with the 4(1) axes. A polypeptide model, corresponding with the known residue sequence, has been fitted to the electron density map to produce a structure that consists of four domains. All four have an alpha/beta structure; the first three have a somewhat similar topology that is based on a mixed parallel/antiparallel beta sheet, whereas the fourth is based on an antiparallel sheet. The active site lies between the four domains, with the phosphoserine residue in the first domain and some of the probable substrate-binding residues in the fourth and final domain. The carboxyl edges of all four sheets are directed towards the active site region, which lies in a deep crevice.     

The structure of yeast enolase at 2.25-A resolution. An 8-fold beta + alpha-barrel with a novel beta beta alpha alpha (beta alpha)6 topology

The three-dimensional structure of yeast enolase has been determined by the multiple isomorphous replacement method followed by the solvent flattening technique. A polypeptide model, corresponding with the known amino acid sequence, has been fitted to the electron density map. Crystallographic restrained least-squares refinement of the model without solvent gave R = 20.0% for 6-2.25-A resolution with good geometry. A model with 182 water molecules and 1 sulfate which is still being refined has presently R = 17.0%. The molecule is a dimer with subunits related by 2-fold crystallographic symmetry. The subunit has dimensions 60 X 55 X 45 A and is built from two domains. The smaller N-terminal domain has an alpha + beta structure based on a three-stranded antiparallel meander and four helices. The main domain is an 8-fold beta + alpha-barrel. The enolase barrel is, however, different from the triose phosphate isomerase barrel; its topology is beta beta alpha alpha (beta alpha)6 rather than (beta alpha)8 as found in triose phosphate isomerase. The inner beta-barrel is not entirely parallel, the second strand is antiparallel to the other strands, and the direction of the first helix is also reversed with respect to the other helices. This supports the hypothesis that some enzymes evolved independently producing the stable structure of beta alpha barrels with either enolase or triose phosphate isomerase topology. The active site of enolase is located at the carboxylic end of the barrel. A fragment of the N-terminal domain and two long loops protruding from the barrel domain form a wide crevice leading to the active site region. Asp246, Glu295, and Asp320 are the ligands of the conformational cation. Other residues in the active site region are Glu168, Asp321, Lys345, and Lys396.     

Mechanism of the reaction catalyzed by mandelate racemase. 2. Crystal structure of mandelate racemase at 2.5-A resolution: identification of the active site and possible catalytic residues

The crystal structure of mandelate racemase (MR) has been solved at 3.0-A resolution by multiple isomorphous replacement and subsequently refined against X-ray diffraction data to 2.5-A resolution by use of both molecular dynamics refinement (XPLOR) and restrained least-squares refinement (PROLSQ). The current crystallographic R-factor for this structure is 18.3%. MR is composed of two major structural domains and a third, smaller, C-terminal domain. The N-terminal domain has an alpha + beta topology consisting of a three-stranded antiparallel beta-sheet followed by an antiparallel four alpha-helix bundle. The central domain is a singly wound parallel alpha/beta-barrel composed of eight central strands of beta-sheet and seven alpha-helices. The C-terminal domain consists of an irregular L-shaped loop with several short sections of antiparallel beta-sheet and two short alpha-helices. This C-terminal domain partially covers the junction between the major domains and occupies a region of the central domain that is filled by an eight alpha-helix in all other known parallel alpha/beta-barrels except for the barrel domain in muconate lactonizing enzyme (MLE) [Goldman, A., Ollis, D. L., & Steitz, T. A. (1987) J. Mol. Biol. 194, 143] whose overall polypeptide fold and amino acid sequence are strikingly similar to those of MR [Neidhart, D. J., Kenyon, G. L., Gerlt, J. A., & Petsko, G. A. (1990) Nature 347, 692]. In addition, the crystal structure reveals that, like MLE, MR is tightly packed as an octamer of identical subunits. The active site of MR is located between the two major domains, at the C-terminal ends of the beta-strands in the alpha/beta-barrel domain. The catalytically essential divalent metal ion is ligated by three side-chain carboxyl groups contributed by residues of the central beta-sheet. A model of a productive substrate complex of MR has been constructed on the basis of difference Fourier analysis at 3.5-A resolution of a complex between MR and (R,S)-p-iodomandelate, permitting identification of residues that may participate in substrate binding and catalysis. The ionizable groups of both Lys 166 and His 297 are positioned to interact with the chiral center of substrate, suggesting that both of these residues may function as acid/base catalysts.(ABSTRACT TRUNCATED AT 400 WORDS)     

The three-dimensional structure of a glutathione S-transferase from the mu gene class. Structural analysis of the binary complex of isoenzyme 3-3 and glutathione at 2.2-A resolution.

The crystal structure of a mu class glutathione S-transferase (EC 2.5.1.18) from rat liver (isoenzyme 3-3) in complex with the physiological substrate glutathione (GSH) has been solved at 2.2-A resolution by multiple isomorphous replacement methods. The enzyme crystallized in the monoclinic space group C2 with unit cell dimensions of a = 87.98 A, b = 69.41 A, c = 81.34 A, and beta = 106.07 degrees. Oligonucleotide-directed site-specific mutagenesis played an important role in the solution of the structure in that the cysteine mutants C86S, C114S, and C173S were used to help locate the positions of mercuric ion sites in nonisomorphous derivatives with ethylmercuric phosphate and to align the sequence with the model derived from MIR phases. A complete model for the protein was not obtained until part of the solvent structure was interpreted. The dimer in the asymmetric unit refined to a crystallographic R = 0.171 for 19,298 data and I > or = 1.5 sigma (I). The final model consists of 4150 atoms, including all non-hydrogen atoms of 434 amino acid residues, two GSH molecules, and oxygen atoms of 474 water molecules. The dimeric enzyme is globular in shape with dimensions of 53 x 62 x 56 A. Crystal contacts are primarily responsible for conformational differences between the two subunits which are related by a noncrystallographic 2-fold axis. The structure of the type 3 subunit can be divided into two domains separated by a short linker, a smaller alpha/beta domain (domain I, residues 1-82), and a larger alpha domain (domain II, residues 90-217). Domain I contains four beta-strands which form a central mixed beta-sheet and three alpha-helices which are arranged in a beta alpha beta alpha beta beta alpha motif. Domain II is composed of five alpha-helices. Domain I can be considered the glutathione binding domain, while domain II seems to be primarily responsible for xenobiotic substrate binding. The active site is located in a deep (19-A) cavity which is composed of three relatively mobile structural elements: the long loop (residues 33-42) of domain I, the alpha 4/alpha 5 helix-turn-helix segment, and the C-terminal tail. GSH is bound at the active site in an extended conformation at one end of the beta-sheet of domain I with its backbone facing the cavity and the sulfur pointing toward the subunit to which it is bound.(ABSTRACT TRUNCATED AT 400 WORDS)     

Isomaltulose synthase (PalI) of Klebsiella sp. LX3. Crystal structure and implication of mechanism

Isomaltulose synthase from Klebsiella sp. LX3 (PalI, EC 5.4.99.11) catalyzes the isomerization of sucrose to produce isomaltulose (alpha-D-glucosylpyranosyl-1,6-D-fructofuranose) and trehalulose (alpha-D-glucosylpyranosyl-1,1-d-fructofuranose). The PalI structure, solved at 2.2-A resolution with an R-factor of 19.4% and Rfree of 24.2%, consists of three domains: an N-terminal catalytic (beta/alpha)8 domain, a subdomain between N beta 3 and N alpha 3, and a C-terminal domain having seven beta-strands. The active site architecture of PalI is identical to that of other glycoside hydrolase family 13 members, suggesting a similar mechanism in substrate binding and hydrolysis. However, a unique RLDRD motif in the proximity of the active site has been identified and shown biochemically to be responsible for sucrose isomerization. A two-step reaction mechanism for hydrolysis and isomerization, which occurs in the same pocket is proposed based on both the structural and biochemical data. Selected C-terminal truncations have been shown to reduce and even abolish the enzyme activity, consistent with the predicted role of the C-terminal residues in the maintenance of enzyme conformation and active site topology.     

Crystal structure of the his-tagged saccharopine reductase from Saccharomyces cerevisiae at 1.7-Å resolution

The three-dimensional structure of the saccharopine reductase enzyme from the budding yeast Saccharomyces cerevisiae was determined to 1.7-A resolution in the apo form by using molecular replacement. The enzyme monomer consists of three domains: domain I is a variant of the Rossmann fold, domain II folds into a alpha/beta structure containing a mixed seven-stranded beta-sheet as the central core, and domain III has an all-helical fold. Comparative fold alignment with the enzyme from Magnaporthe grisea suggests that domain I binds to NADPH, and domain II binds to saccharopine and is involved in dimer formation. Domain III is involved in closing the active site of the enzyme once substrates are bound. Structural comparison of the saccharopine reductase enzymes from S. cerevisiae and M. grisea indicates that domain II has the highest number of conserved residues, suggesting that it plays an important role in substrate binding and in spatially orienting domains I and III.     

Three-dimensional structure of rat acid phosphatase.

The crystal structure of recombinant rat prostatic acid phosphatase was determined to 3 A resolution with protein crystallographic methods. The enzyme subunit is built up of two domains, an alpha/beta domain consisting of a seven-stranded mixed beta-sheet with helices on both sides of the sheet and a smaller alpha domain. Two disulfide bridges between residues 129-340 and 315-319 were found. Electron density at two of the glycosylation sites for parts of the carbohydrate moieties was observed. The dimer of acid phosphatase is formed through two-fold interactions of edge strand 3 from one subunit with strand 3 from the second subunit, thus extending the beta-sheet from seven to 14 strands. Other subunit-subunit interactions involve conserved residues from loops between helices and beta-strands. The fold of the alpha/beta domain is similar to the fold observed in phosphoglycerate mutase. The active site is at the carboxy end of the parallel strands of the alpha/beta domain. There is a strong residual electron density at the phosphate binding site which probably represents a bound chloride ion. Biochemical properties and results from site-directed mutagenesis experiments of acid phosphatase are correlated to the three-dimensional structure.     

Structure of methylene-tetrahydromethanopterin dehydrogenase from methylobacterium extorquens AM1

NADP-dependent methylene-H(4)MPT dehydrogenase, MtdA, from Methylobacterium extorquens AM1 catalyzes the dehydrogenation of methylene-tetrahydromethanopterin and methylene-tetrahydrofolate with NADP(+) as cosubstrate. The X-ray structure of MtdA with and without NADP bound was established at 1.9 A resolution. The enzyme is present as a homotrimer. The alpha,beta fold of the monomer is related to that of methylene-H(4)F dehydrogenases, suggesting a common evolutionary origin. The position of the active site is located within a large crevice built up by the two domains of one subunit and one domain of a second subunit. Methylene-H(4)MPT could be modeled into the cleft, and crucial active site residues such as Phe18, Lys256, His260, and Thr102 were identified. The molecular basis of the different substrate specificities and different catalytic demands of MtdA compared to methylene-H(4)F dehydrogenases are discussed.     

A novel fold revealed by Mycobacterium tuberculosis NAD kinase, a key allosteric enzyme in NADP biosynthesis

NAD kinase catalyzes the magnesium-dependent phosphorylation of NAD, representing the sole source of freshly synthesized NADP in all organisms. The enzyme is essential for the growth of the deadly multidrug-resistant pathogen Mycobacterium tuberculosis and is an attractive target for novel antitubercular agents. The crystal structure of NAD kinase has been solved by multiwavelength anomalous dispersion at a resolution of 2.3 A in its T state. Two crystal forms have been obtained revealing either a dimer or a tetramer. The enzyme architecture discloses a novel molecular arrangement, with each subunit consisting of an alpha/beta N-terminal domain and a C-terminal 12-stranded beta sandwich domain, connected by swapped beta strands. The C-terminal domain shows a striking internal approximate 222 symmetry and an unprecedented topology, revealing a novel fold within the family of all beta structures. The catalytic site is located in the long crevice that defines the interface between the domains. The conserved GGDG structural fingerprint of the catalytic site is reminiscent of the related region in 6-phosphofructokinase, supporting the hypothesis that NAD kinase belongs to a newly reported superfamily of kinases.     

Normal mode analysis of human lysozyme: study of the relative motion of the two domains and characterization of the harmonic motion

A normal mode analysis of human lysozyme has been carried out at room temperature. Human lysozyme is an enzyme constituted of two domains separated by an active site cleft, the motion of which is thought to be relevant for biological function. This motion has been described as a hinge bending motion. McCammon et al. have determined the characteristics of the hinge bending motion but they assumed a prior knowledge of the hinge axis. In this work we propose a method which is free from this assumption and determines the hinge axis and root mean square (rms) rotation angle which give the best agreement with the pattern of changes in all the distances between nonhydrogen atoms in the two domains, obtained by the normal mode analysis. The hinge axis we found is notably different from the one previously determined and goes, roughly, through the C alpha 55 and C alpha 76, i.e., it is located at the base of the beta-sheet of the second domain. The rms value for the rotation angle is also twice as large as the previous one: 3.37 degrees. It is shown that this hinge bending motion provides a fairly good approximation of the dynamics of human lysozyme and that the normal mode with the lowest frequency has a dominating contribution to this hinge bending motion. A study of the accessible surface area of the residues within the cleft reveals that the motion does not result in a better exposure to the solvent of these residues. A characterization of the thermally excited state (under the hypothesis of the harmonicity of the potential energy surface) has been done using the concept of topology of atom packing. Under this hypothesis the thermal fluctuations result only in a small change of the topology of atom packing, leading therefore to nearly elastic deformations of the protein.     

Crystal structures of Escherichia coli ATP-dependent glucokinase and its complex with glucose

Intracellular glucose in Escherichia coli cells imported by phosphoenolpyruvate-dependent phosphotransferase system-independent uptake is phosphorylated by glucokinase by using ATP to yield glucose-6-phosphate. Glucokinases (EC 2.7.1.2) are functionally distinct from hexokinases (EC 2.7.1.1) with respect to their narrow specificity for glucose as a substrate. While structural information is available for ADP-dependent glucokinases from Archaea, no structural information exists for the large sequence family of eubacterial ATP-dependent glucokinases. Here we report the first structure determination of a microbial ATP-dependent glucokinase, that from E. coli O157:H7. The crystal structure of E. coli glucokinase has been determined to a 2.3-A resolution (apo form) and refined to final Rwork/Rfree factors of 0.200/0.271 and to 2.2-A resolution (glucose complex) with final Rwork/Rfree factors of 0.193/0.265. E. coli GlK is a homodimer of 321 amino acid residues. Each monomer folds into two domains, a small alpha/beta domain (residues 2 to 110 and 301 to 321) and a larger alpha+beta domain (residues 111 to 300). The active site is situated in a deep cleft between the two domains. E. coli GlK is structurally similar to Saccharomyces cerevisiae hexokinase and human brain hexokinase I but is distinct from the ADP-dependent GlKs. Bound glucose forms hydrogen bonds with the residues Asn99, Asp100, Glu157, His160, and Glu187, all of which, except His160, are structurally conserved in human hexokinase 1. Glucose binding results in a closure of the small domains, with a maximal Calpha shift of approximately 10 A. A catalytic mechanism is proposed that is consistent with Asp100 functioning as the general base, abstracting a proton from the O6 hydroxyl of glucose, followed by nucleophilic attack at the gamma-phosphoryl group of ATP, yielding glucose-6-phosphate as the product.     

Crystal structure at 1.45 A resolution of alanine racemase from a pathogenic bacterium, Pseudomonas aeruginosa, contains both internal and external aldimine forms

The structure of the catabolic alanine racemase, DadX, from the pathogenic bacterium Pseudomonas aeruginosa, reported here at 1.45 A resolution, is a dimer in which each monomer is comprised of two domains, an eight-stranded alpha/beta barrel containing the PLP cofactor and a second domain primarily composed of beta-strands. The geometry of each domain is very similar to that of Bacillus stearothermophilus alanine racemase, but the rotation between domains differs by about 15 degrees. This change does not alter the structure of the active site in which almost all residues superimpose well with a low rms difference of 0.86 A. Unexpectedly, the active site of DadX contains a guest substrate that is located where acetate and propionate have been observed in the Bacillus structures. It is modeled as d-lysine and oriented such that its terminal NZ atom makes a covalent bond with C4' of PLP. Since the internal aldimine bond between the protein lysine, Lys33, and C4' of PLP is also unambiguously observed, there appears to be an equilibrium between both internally and externally reacted forms. The PLP cofactor adopts two partially occupied conformational states that resemble previously reported internal and external aldimine complexes.     

Structure/function studies of phosphoryl transfer by phosphoenolpyruvate carboxykinase

Phosphoenolpyruvate carboxykinase (PCK) catalyzes the conversion of oxaloacetate (OAA) to PEP and carbon dioxide with the subsequent conversion of nucleoside triphosphate to nucleoside diphosphate (NDP). The 1.9 A resolution structure of Escherichia coli PCK consisted of a 275-residue N-terminal domain and a 265-residue C-terminal domain with the active site located in a cleft between these domains. Each domain has an alpha/beta topology and the overall structure represents a new protein fold. Furthermore, PCK has a unique mononucleotide-binding fold. The 1.8 A resolution structure of the complex of ATP/Mg(2+)/oxalate with PCK revealed a 20 degrees hinge-like rotation of the N- and C-terminal domains, which closed the active site cleft. The ATP was found in the unusual syn conformation as a result of binding to the enzyme. Along with the side chain of Lys254, Mg(2+) neutralizes charges on the P beta and P gamma oxygen atoms of ATP and stabilizes an extended, eclipsed conformation of the P beta and P gamma phosphoryl groups. The sterically strained high-energy conformation likely lowers the free energy of activation for phosphoryl transfer. Additionally, the gamma-phosphoryl group becomes oriented in-line with the appropriate enolate oxygen atom, which strongly supports a direct S(N)2-type displacement of this gamma-phosphoryl group by the enolate anion. In the 2.0 A resolution structure of the complex of PCK/ADP/Mg(2+)/AlF(3), the AlF(3) moiety represents the phosphoryl group being transferred during catalysis. There are three positively charged groups that interact with the fluorine atoms, which are complementary to the three negative charges that would occur for an associative transition state.     

The crystal structure of N-acetyl-L-glutamate synthase from Neisseria gonorrhoeae provides insights into mechanisms of catalysis and regulation

The crystal structures of N-acetylglutamate synthase (NAGS) in the arginine biosynthetic pathway of Neisseria gonorrhoeae complexed with acetyl-CoA and with CoA plus N-acetylglutamate have been determined at 2.5- and 2.6-A resolution, respectively. The monomer consists of two separately folded domains, an amino acid kinase (AAK) domain and an N-acetyltransferase (NAT) domain connected through a 10-A linker. The monomers assemble into a hexameric ring that consists of a trimer of dimers with 32-point symmetry, inner and outer ring diameters of 20 and 100A, respectively, and a height of 110A(.) Each AAK domain interacts with the cognate domains of two adjacent monomers across two 2-fold symmetry axes and with the NAT domain from a second monomer of the adjacent dimer in the ring. The catalytic sites are located within the NAT domains. Three active site residues, Arg316, Arg425, and Ser427, anchor N-acetylglutamate in a position at the active site to form hydrogen bond interactions to the main chain nitrogen atoms of Cys356 and Leu314, and hydrophobic interactions to the side chains of Leu313 and Leu314. The mode of binding of acetyl-CoA and CoA is similar to other NAT family proteins. The AAK domain, although catalytically inactive, appears to bind arginine. This is the first reported crystal structure of any NAGS, and it provides insights into the catalytic function and arginine regulation of NAGS enzymes.     

Crystal structure of the first dissimilatory nitrate reductase at 1.9 A solved by MAD methods.

BACKGROUND: The periplasmic nitrate reductase (NAP) from the sulphate reducing bacterium Desulfovibrio desulfuricans ATCC 27774 is induced by growth on nitrate and catalyses the reduction of nitrate to nitrite for respiration. NAP is a molybdenum-containing enzyme with one bis-molybdopterin guanine dinucleotide (MGD) cofactor and one [4Fe-4S] cluster in a single polypeptide chain of 723 amino acid residues. To date, there is no crystal structure of a nitrate reductase. RESULTS: The first crystal structure of a dissimilatory (respiratory) nitrate reductase was determined at 1.9 A resolution by multiwavelength anomalous diffraction (MAD) methods. The structure is folded into four domains with an alpha/beta-type topology and all four domains are involved in cofactor binding. The [4Fe-4S] centre is located near the periphery of the molecule, whereas the MGD cofactor extends across the interior of the molecule interacting with residues from all four domains. The molybdenum atom is located at the bottom of a 15 A deep crevice, and is positioned 12 A from the [4Fe-4S] cluster. The structure of NAP reveals the details of the catalytic molybdenum site, which is coordinated to two MGD cofactors, Cys140, and a water/hydroxo ligand. A facile electron-transfer pathway through bonds connects the molybdenum and the [4Fe-4S] cluster. CONCLUSIONS: The polypeptide fold of NAP and the arrangement of the cofactors is related to that of Escherichia coli formate dehydrogenase (FDH) and distantly resembles dimethylsulphoxide reductase. The close structural homology of NAP and FDH shows how small changes in the vicinity of the molybdenum catalytic site are sufficient for the substrate specificity.     

Crystallographic study at 2.5 A resolution of the interaction of methionyl-tRNA synthetase from Escherichia coli with ATP

The crystal structure of the tryptic fragment of the methionyl-tRNA synthetase from Escherichia coli, complexed with ATP, has been refined to a crystallographic R-factor of 0.220, at 2.5 A resolution (for 4433 protein atoms). In the last stages of the refinement, the simulated annealing refinement method was fully applied, contributing to a drastic improvement of the model and the identification of the missing atoms. In the final model, the root-mean-square deviation from ideality for bond distances is 0.021 A and for angle distances is 0.054 A. The position of the zinc ion has been confirmed and is located near the active site. The tryptic fragment is composed of two globular domains. The first domain, from the N terminus to Thr360, contains a nucleotide-binding fold into which two long polypeptides of 101 and 70 residues are inserted. The nucleotide-binding fold is strengthened by the presence of the zinc ion in the vicinity of the active site. The second domain, up to Pro526, is mainly alpha-helical. The C-terminal polypeptide, Phe527 to Lys551, folds back towards the first domain, making a link between the two domains. The heptapeptide 528-534 partly shapes a deep cavity that plunges into the central core of the nucleotide-binding fold, where the ATP molecule is located. The adenine ring, deeply buried in the bottom of the cleft, is blocked between the first helix HA, and the strands A and D of the beta-sheet and makes no polar interaction with the enzyme. The 2' and 3' hydroxyl groups of the ribose, whose conformation is C2' endo, interact with the main-chain carbonyl oxygen atoms of Ile231 and Glu241, respectively. The side-chain nitrogen atom of Lys142 is at hydrogen-bonding distance from the ring oxygen O-4' of the ribose. One of the alpha-phosphate oxygen atoms and one of the gamma-phosphate oxygen atoms interact with the imidazole ring of His21, which is well conserved in many of the known synthetases; this indicates a possible crucial role for this residue in binding ATP. The beta-phosphate group is linked to the main-chain carbonyl oxygen atom of Tyr15 through an intermediate water molecule. The gamma-phosphate group interacts with the carbonyl oxygen atom and the side-chain of Asn17.(ABSTRACT TRUNCATED AT 400 WORDS)     

Crystal structure of 1-deoxy-D-xylulose-5-phosphate reductoisomerase, a crucial enzyme in the non-mevalonate pathway of isoprenoid biosynthesis.

We have solved the 2.5-A crystal structure of 1-deoxy-D-xylulose-5-phosphate reductoisomerase, an enzyme involved in the mevalonate-independent 2-C-methyl-D-erythritol-4-phosphate pathway of isoprenoid biosynthesis. The structure reveals that the enzyme is present as a homodimer. Each monomer displays a V-like shape and is composed of an amino-terminal dinucleotide binding domain, a connective domain, and a carboxyl-terminal four-helix bundle domain. The connective domain is responsible for dimerization and harbors most of the active site. The strictly conserved acidic residues Asp(150), Glu(152), Glu(231), and Glu(234) are clustered at the putative active site and are probably involved in the binding of divalent cations mandatory for enzyme activity. The connective and four-helix bundle domains show significant mobility upon superposition of the dinucleotide binding domains of the three conformational states present in the asymmetric unit of the crystal. A still more pronounced flexibility is observed for a loop spanning residues 186 to 216, which adopts two completely different conformations within the three protein conformers. A possible involvement of this loop in an induced fit during substrate binding is discussed.     

Amylosucrase, a glucan-synthesizing enzyme from the alpha-amylase family

Amylosucrase (E.C. 2.4.1.4) is a member of Family 13 of the glycoside hydrolases (the alpha-amylases), although its biological function is the synthesis of amylose-like polymers from sucrose. The structure of amylosucrase from Neisseria polysaccharea is divided into five domains: an all helical N-terminal domain that is not similar to any known fold, a (beta/alpha)(8)-barrel A-domain, B- and B'-domains displaying alpha/beta-structure, and a C-terminal eight-stranded beta-sheet domain. In contrast to other Family 13 hydrolases that have the active site in the bottom of a large cleft, the active site of amylosucrase is at the bottom of a pocket at the molecular surface. A substrate binding site resembling the amylase 2 subsite is not found in amylosucrase. The site is blocked by a salt bridge between residues in the second and eight loops of the (beta/alpha)(8)-barrel. The result is an exo-acting enzyme. Loop 7 in the amylosucrase barrel is prolonged compared with the loop structure found in other hydrolases, and this insertion (forming domain B') is suggested to be important for the polymer synthase activity of the enzyme. The topology of the B'-domain creates an active site entrance with several ravines in the molecular surface that could be used specifically by the substrates/products (sucrose, glucan polymer, and fructose) that have to get in and out of the active site pocket.