Activities and relative affinities of divalent metals in unmodified and phosphorothioate-substituted hammerhead ribozymes

The roles of metals in the phosphodiester bond cleavage reaction performed by the hammerhead ribozyme are under investigation. In this study, the apparent affinities and the abilities of several different metals to support ribozyme activity are reported. The relative affinities of divalent cations for the hammerhead ribozyme are determined by measuring their ability to release bound Mn²⁺. The EPR-detected Mn²⁺ competition studies give an order of apparent affinity of Mn²⁺ Co²⁺ Zn²⁺>Cd²⁺Mg²⁺. This ordering generally follows the trend of maximum rates of cleavage determined at pH 7.0, 0.1 M NaCl, and saturating metal concentrations, of Mn²⁺>Co²⁺>Cd²⁺>Mg²⁺. The maximum rate is observed for Mn²⁺ under these conditions and may be related to the high affinity, low pK_a and low ΔH_hyd of this ion. Substitution of phosphorothioates 5′ to each of the nine adenosines in the enzyme strand yields a change in the Mn²⁺ binding properties of the hammerhead complex. In the phosphorothioate-substituted hammerhead complex, eight to nine Mn²⁺ bind in two types of classes: ‘type 1’ (n=1±0.3, K_d=1.1±1 μM) and weaker ‘type 2’ (n=7.7±0.3, K_d=125±27 μM). The multiple phosphorothioate substitutions result in the loss of two to three of the higher affinity sites observed in the unmodified ribozyme. Metal competition studies with the phosphorothioate-substituted ribozyme indicate that the relative affinities of the metals are Cd²⁺>Zn²⁺>Co²⁺, Mg²⁺ with the number of Mn²⁺ displaced and apparent affinity of the thiophilic Cd²⁺ most affected by the phosphorothioate substitutions.     

The influence of imperfectly paired helices I and III on the catalytic activity of hammerhead ribozymes.

Several catalytic antisense RNAs directed against different regions of the genomic or antigenomic RNA of Sendai virus were constructed. All RNAs contained the same catalytic domain based on hammerhead ribozymes but some had deletions or mutations resulting in imperfect helices I and III. Pre-annealed substrate/ribozyme complexes were used to determine the rates of the cleavage process for the different ribozymes under single-turnover conditions. It was found that the sequence context surrounding the cleavable motif influenced the cleavage efficiencies. Deletions or mutations of nucleotides 2.1 or 15.1 and 15.2 according to the numbering system for hammerhead ribozymes of Hertel et al. destroyed catalytic activity. Deletions of nucleotide 2.2 or additional nucleotides in the helix I-forming region of the ribozyme did not destruct, but only reduced the cleavage efficiencies. Similar results were observed for a deletion of nucleotide 15.3. Simultaneous deletions within helices I and III resulted in alternative cleavage sites. The potential consequences for the specificity of the ribozyme reaction are discussed.     

A strategy for developing a hammerhead ribozyme for selective RNA cleavage depending on substitutional RNA editing

Substitutional RNA editing plays a crucial role in the regulation of biological processes. Cleavage of target RNA that depends on the specific site of substitutional RNA editing is a useful tool for analyzing and regulating intracellular processes related to RNA editing. Hammerhead ribozymes have been utilized as small catalytic RNAs for cleaving target RNA at a specific site and may be used for RNA-editing-specific RNA cleavage. Here we reveal a design strategy for a hammerhead ribozyme that specifically recognizes adenosine to inosine (A-to-I) and cytosine to uracil (C-to-U) substitutional RNA-editing sites and cleaves target RNA. Because the hammerhead ribozyme cleaves one base upstream of the target-editing site, the base that pairs with the target-editing site was utilized for recognition. RNA-editing-specific ribozymes were designed such that the recognition base paired only with the edited base. These ribozymes showed A-to-I and C-to-U editing-specific cleavage activity against synthetic serotonin receptor 2C and apolipoprotein B mRNA fragments in vitro, respectively. Additionally, the ribozyme designed for recognizing A-to-I RNA editing at the Q/R site on filamin A (FLNA) showed editing-specific cleavage activity against physiologically edited FLNA mRNA extracted from cells. We demonstrated that our strategy is effective for cleaving target RNA in an editing-dependent manner. The data in this study provided an experimental basis for the RNA-editing-dependent degradation of specific target RNA in vivo.     

Inosine(15.1) hammerhead ribozymes for targeting the transthyretin-30 mutation.

The most common cause of hereditary amyloidosis (HA) is the val30met mutation in the transthyretin protein (TTR-met30). The mutation is caused by a mononucleic substitution from G to A (GUC to AUC) in the transthyretin gene resulting in the exchange for the amino acids valine to methionine in the corresponding protein sequence. The aim of our work was the development of a specific cleavage of TTR-30 mRNA using hammerhead ribozymes. We chemically modified nuclease stable hammerhead ribozymes to target the TTR-30 mRNA with high specificity. The exchange of adenosine(15.1) with inosine(15.1) in the catalytic core of the hammerhead ribozyme resulted in a change of the cleavable target sequence from N(16.2)U(16.1)H(17) to N(16. 2)C(16.1)H(17) without loss in ribozymal activity (Nucleic Acids Res. 26, 2279-2285, 1998). This modification allowed a specific cleavage of the TTR-30 mutation ("gCC Gug" to "gCC Aug"). In vitro experiments with TTR-30 mRNA demonstrated that the RNase stable inosine(15.1) hammerhead ribozyme cleaved the TTR-30 mRNA with 100% specificity and with a velocity of 0.23 min(-1), whereas no cleavage occured in the wildtype mRNA of TTR. In conclusion, the development of this NCH specific hammerhead ribozyme represents a promising tool for future in vivo therapeutic application for TTR-met30 induced hereditary amyloidosis.     

The effect of structure in a long target RNA on ribozyme cleavage efficiency.

Inhibition of gene expression by catalytic RNA (ribozymes) requires that ribozymes efficiently cleave specific sites within large target RNAs. However, the cleavage of long target RNAs by ribozymes is much less efficient than cleavage of short oligonucleotide substrates because of higher order structure in the long target RNA. To further study the effects of long target RNA structure on ribozyme cleavage efficiency, we determined the accessibility of seven hammerhead ribozyme cleavage sites in a target RNA that contained human immunodeficiency virus type 1 (HIV-1) vif - vpr . The base pairing-availability of individual nucleotides at each cleavage site was then assessed by chemical modification mapping. The ability of hammerhead ribozymes to cleave the long target RNA was most strongly correlated with the availability of nucleotides near the cleavage site for base pairing with the ribozyme. Moreover, the accessibility of the seven hammerhead ribozyme cleavage sites in the long target RNA varied by up to 400-fold but was directly determined by the availability of cleavage sites for base pairing with the ribozyme. It is therefore unlikely that steric interference affected hammerhead ribozyme cleavage. Chemical modification mapping of cleavage site structure may therefore provide a means to identify efficient hammerhead ribozyme cleavage sites in long target RNAs.     

Effects of phosphorothioate and 2-amino groups in hammerhead ribozymes on cleavage rates and Mg2+ binding

Mg2+ is important for the RNase activity of the hammerhead ribozyme. To investigate the binding properties of Mg2+ to the hammerhead ribozyme, cleavage rates and CD spectra for substrates containing inosine or guanosine at the cleavage site were measured. The 2-amino group of this guanosine interfered with the rate of the cleavage reaction and did not affect the amount of Mg2+ bound to the hammerhead RNA. The kinetics and CD spectra for chemically synthesized oligoribonucleotides with a Sp or Rp phosphorothioate diester bond at the cleavage site indicated that 1 mol of Mg2+ binds to the pro-R oxygen of phosphate. The binding constant for Mg2+ was about 10(4) M-1, which represents outer-sphere complexation. The hammerhead ribozyme catalyzes the cleavage reaction via an in-line pathway. This mechanism has been proved for RNA cleavage by RNase A by using a modified oligonucleotide that has an Sp phosphorothionate bond at the cleavage site. From these results, we present the reaction pathway and a model for Mg2+ binding to the hammerhead ribozyme.     

Substitution of the 2'-hydroxyl group at position 2.1 by an amino group interferes with Mg(2+) binding and efficient cleavage by hammerhead ribozyme.

Recently we have demonstrated that hammerhead ribozymes can be fully substituted with 2'-amino pyrimidines without detriment to the catalytic activity, provided that positions 2.2 and/or 2.1 are not modified. We now report on the potential molecular mechanisms by which 2'-amino groups at these positions inhibit the ribozyme cleavage activity. In the presence of Mg(2+), the 2'-amino modification at positions 2.2 and/or 2.1 had no significant effect on substrate binding. Detailed analysis of the ribozyme initial cleavage rates in the presence of various Mg(2+) concentrations indicated that Mg(2+) binding is inhibited by the 2'-amino group at position 2.1. Furthermore, preannealed substrate molecules to the modified ribozyme are not effectively cleaved upon Mg(2+) addition, indicating an alteration of the ribozyme cleavage step. Surprisingly, the cleavage activity of the modified ribozymes was substantially increased when Mg(2+) ions were replaced by the thiophilic Mn(2+) ions, whereas only a moderate cleavage enhancement occurred with its unmodified version. Taken together, our findings indicate that changes in the sugar at position 2.1 alter Mg(2+)-promoting ribozyme cleavage.     

1-Deazaadenosine: synthesis and activity of base-modified hammerhead ribozymes.

The incorporation of 1-deazaadenosine (c1A, 1b) into a hammerhead ribozyme and the resulting catalytic activity is described. For this purpose the phosphoramidite 2a and the 3'-phosphonate 2b as well as Fractosil-linked 1-deazaadenosine (3b) were prepared. The methoxyacetyl group was used for the 6-amino group protection and the triisopropylsilyl residue was introduced as the 2'-OH protecting group. Replacement of residues A14and A15.1 of the hammerhead ribozyme by 1-deazaadenosine resulted in a significantly reduced catalytic activity. Substitution of the A6, A9 and A13 residues has only a minor influence. The findings observed on ribozymes modified with 1-deazaadenosine were compared with those containing other adenosine analogues.     

Comparative single-turnover kinetic analyses of trans-cleaving hammerhead ribozymes with naturally derived non-conserved sequence motifs

trans-Cleaving hammerhead ribozyme variants were generated with mimicked non-conserved internal loop motifs derived from five structurally diverse natural cis-cleaving ribozymes. Most modified trans-cleaving variants showed enhanced single-turnover cleavage rates relative to minimal counterparts that lack tertiary interactions between internal loop motifs I and II, and relative to controls with sequence changes in loop I. The trans-cleaving ribozyme derived from the positive strand of peach latent mosaic viroid had the highest observed cleavage rate, suggesting a structurally optimized motif that facilitates rapid formation of the ribozyme catalytic center in a trans-reaction.     

LNA nucleotides improve cleavage efficiency of singular and binary hammerhead ribozymes

Variants of trans-acting hammerhead ribozymes were modified with Locked Nucleic Acid (LNA) nucleotides to reduce their size, to improve access to their RNA target and to explore combinational properties of binary constructs. Using low Mg(2+) concentrations and low substrate and ribozyme concentrations, it was found that insertion of LNA monomers into the substrate binding arms allowed these to be shortened and results in a very active enzyme under both single and multiple turnover conditions. Incorporation of a mix of LNA and DNA residues further increased the multiple turnover cleavage activity. At high Mg(2+) concentrations or high substrate and ribozyme concentrations, the enhancing effect of LNA incorporation was even more prominent. Using LNA in the stem of Helix II diminished cleavage activity, but allowed deletion of the tetra-loop and thus separating the ribozyme into two molecules with each half binding to the substrate. Efficient, binary hammerhead ribozymes were pursued in a combinatorial approach using a 6-times 5 library, which was analysed concerning the best combinations, buffer conditions and fragment ratios.     

Chimeric DNA-RNA hammerhead ribozymes have enhanced in vitro catalytic efficiency and increased stability in vivo.

Subsequent to the discovery that RNA can have site specific cleavage activity, there has been a great deal of interest in the design and testing of trans-acting catalytic RNAs as both surrogate genetic tools and as therapeutic agents. We have been developing catalytic RNAs or ribozymes with target specificity for HIV-1 RNA and have been exploring chemical synthesis as one method for their production. To this end, we have chemically synthesized and experimentally analyzed chimeric catalysts consisting of DNA in the non-enzymatic portions, and RNA in the enzymatic core of hammerhead type ribozymes. Substitutions of DNA for RNA in the various stems of a hammerhead ribozyme have been analyzed in vitro for kinetic efficiency. One of the chimeric ribozymes used in this study, which harbors 24 bases of DNA capable of base-pairing interactions with an HIV-1 gag target, but maintains RNA in the catalytic center and in stem-loop II, has a sixfold greater kcat value than the all RNA counterpart. This increased activity appears to be the direct result of enhanced product dissociation. Interestingly, a chimeric ribozyme in which stem-loop II (which divides the catalytic core) is comprised of DNA, exhibited a marked reduction in cleavage activity, suggesting that DNA in this region of the ribozyme can impart a negative effect on the catalytic function of the ribozyme. DNA-RNA chimeric ribozymes transfected by cationic liposomes into human T-lymphocytes are more stable than their all-RNA counterparts. Enhanced catalytic turnover and stability in the absence of a significant effect on Km make chimeric ribozymes favorable candidates for therapeutic agents.     

A three-nucleotide helix I is sufficient for full activity of a hammerhead ribozyme: advantages of an asymmetric design.

Trans-cleaving hammerhead ribozymes with long target-specific antisense sequences flanking the catalytic domain share some features with conventional antisense RNA and are therefore termed 'catalytic antisense RNAs'. Sequences 5' to the catalytic domain form helix I and sequences 3' to it form helix III when complexed with the target RNA. A catalytic antisense RNA of more than 400 nucleotides, and specific for the human immunodeficiency virus type 1 (HIV-1), was systematically truncated within the arm that constituted originally a helix I of 128 base pairs. The resulting ribozymes formed helices I of 13, 8, 5, 3, 2, 1 and 0 nucleotides, respectively, and a helix III of about 280 nucleotides. When their in vitro cleavage activity was compared with the original catalytic antisense RNA, it was found that a helix I of as little as three nucleotides was sufficient for full endonucleolytic activity. The catalytically active constructs inhibited HIV-1 replication about four-fold more effectively than the inactive ones when tested in human cells. A conventional hammerhead ribozyme having helices of just 8 nucleotides on either side failed to cleave the target RNA in vitro when tested under the conditions for catalytic antisense RNA. Cleavage activity could only be detected after heat-treatment of the ribozyme substrate mixture which indicates that hammerhead ribozymes with short arms do not associate as efficiently to the target RNA as catalytic antisense RNA. The requirement of just a three-nucleotide helix I allows simple PCR-based generation strategies for asymmetric hammerhead ribozymes. Advantages of an asymmetric design will be discussed.     

Efficient ligation of the Schistosoma hammerhead ribozyme

The hammerhead ribozyme from Schistosoma mansoni is the best characterized of the natural hammerhead ribozymes. Biophysical, biochemical, and structural studies have shown that the formation of the loop-loop tertiary interaction between stems I and II alters the global folding, cleavage kinetics, and conformation of the catalytic core of this hammerhead, leading to a ribozyme that is readily cleaved under physiological conditions. This study investigates the ligation kinetics and the internal equilibrium between cleavage and ligation for the Schistosoma hammerhead. Single turnover kinetic studies on a construct where the ribozyme cleaves and ligates substrate(s) in trans showed up to 23% ligation when starting from fully cleaved products. This was achieved by an approximately 2000-fold increase in the rate of ligation compared to a minimal hammerhead without the loop-loop tertiary interaction, yielding an internal equilibrium that ranges from 2 to 3 at physiological Mg2+ ion concentrations (0.1-1 mM). Thus, the natural Schistosoma hammerhead ribozyme is almost as efficient at ligation as it is at cleavage. The results here are consistent with a model where formation of the loop-loop tertiary interaction leads to a higher population of catalytically active molecules and where formation of this tertiary interaction has a much larger effect on the ligation than the cleavage activity of the Schistosoma hammerhead ribozyme.     

Enzymatic and antisense effects of a specific anti-Ki-ras ribozyme in vitro and in cell culture.

Due to their mode of action, ribozymes show antisense effects in addition to their specific cleavage activity. In the present study we investigated whether a hammerhead ribozyme is capable of cleaving mutated Ki-ras mRNA in a pancreatic carcinoma cell line and whether antisense effects contribute to the activity of the ribozyme. A 2[prime]-O-allyl modified hammerhead ribozyme was designed to cleave specifically the mutated form of the Ki- ras mRNA (GUU motif in codon 12). The activity was monitored by RT-PCR on Ki- ras RNA expression by determination of the relative amount of wild type to mutant Ki-ras mRNA, by 5-bromo-2[prime]-deoxy-uridine incorporation on cell proliferation and by colony formation in soft agar on malignancy in the human pancreatic adenocarcinoma cell line CFPAC-1, which is heterozygous for the Ki-ras mutation. A catalytically inactive ribozyme was used as control to differentiate between antisense and cleavage activity and a ribozyme with random guide sequences as negative control. The catalytically active anti-Ki-ras ribozyme was at least 2-fold more potent in decreasing cellular Ki-ras mRNA levels, inhibiting cell proliferation and colony formation in soft agar than the catalytically inactive ribozyme. The catalytically active anti-Ki-ras ribozyme, but not the catalytically inactive or random ribozyme, increased the ratio of wild type to mutated Ki-ras mRNA in CFPAC-1 cells. In conclusion, both cleavage activity and antisense effects contribute to the activity of the catalytically active anti-Ki-ras hammerhead ribozyme. Specific ribozymes might be useful in the treatment of pancreatic carcinomas containing an oncogenic GTT mutation in codon 12 of the Ki-ras gene.     

Binary hammerhead ribozymes with improved catalytic activity

A new design of binary hammerhead ribozymes displaying high catalytic activity and nucleolytic stability is described. These catalytic structures consist of two partially complementary oligoribonucleotides, capable of assembling into the hammerhead-like structure without tetraloop II on binding to the RNA target. A series of these binary ribozymes targeting the translation initiation region of multiple drug resistance gene mdr1 mRNA was synthesized and assessed in terms of catalytic activity under single and multiple reaction turnover conditions. Enhanced nuclease resistance of the binary ribozymes was achieved by incorporation of 2'-modified nucleotides at selected positions, along with addition of a 3'-3'-linked thymidine cap. The new binary ribozymes exhibit higher RNA cleavage activity than their full-length analogs because of faster dissociation of cleavage products. Furthermore, an excess of one of the ribozyme strands provides the possibility to unfold structured regions of the target RNA and facilitate productive complex formation.     

Design, characterization and testing of tRNA3Lys-based hammerhead ribozymes

A hammerhead ribozyme targeted against the HIV-1 env coding region was expressed as part of the anticodon loop of human tRNA3Lys without sacrificing tRNA stability or ribozyme catalytic activity. These tRNA-ribozymes were isolated from a library which was designed to contain linkers (sequences connecting the ribozyme to the anticodon loop) of random sequence and variable length. The ribozyme target site was provided in cis during selection and in trans during subsequent characterization. tRNA-ribozymes that possessed ideal combinations of linkers were expected to recognize the cis target site more freely and undergo cleavage. The cleaved molecules were isolated, cloned and characterized. Active tRNA-ribozymes were identified and the structural features conducive to cleavage were defined. The selected tRNA-ribozymes were stable, possessed cleavage rates lower or similar to the linear hammerhead ribozyme, and could be transcribed by an extract containing RNA polymerase III. Retroviral vectors expressing tRNA-ribozymes were tested in a human CD4+ T cell line and were shown to inhibit HIV-1 replication. These tRNA3Lys-based hammerhead ribozymes should therefore prove to be valuable for both basic and applied research. Special application is sought in HIV-1 or HIV-2 gene therapy.     

The tolerance to exchanges of the Watson Crick base pair in the hammerhead ribozyme core is determined by surrounding elements

Tertiary interacting elements are important features of functional RNA molecules, for example, in all small nucleolytic ribozymes. The recent crystal structure of a tertiary stabilized type I hammerhead ribozyme revealed a conventional Watson-Crick base pair in the catalytic core, formed between nucleotides C3 and G8. We show that any Watson-Crick base pair between these positions retains cleavage competence in two type III ribozymes. In the Arabidopsis thaliana sequence, only moderate differences in cleavage rates are observed for the different base pairs, while the peach latent mosaic viroid (PLMVd) ribozyme exhibits a preference for a pyrimidine at position 3 and a purine at position 8. To understand these differences, we created a series of chimeric ribozymes in which we swapped sequence elements that surround the catalytic core. The kinetic characterization of the resulting ribozymes revealed that the tertiary interacting loop sequences of the PLMVd ribozyme are sufficient to induce the preference for Y3-R8 base pairs in the A. thaliana hammerhead ribozyme. In contrast to this, only when the entire stem-loops I and II of the A. thaliana sequences are grafted on the PLMVd ribozyme is any Watson-Crick base pair similarly tolerated. The data provide evidence for a complex interplay of secondary and tertiary structure elements that lead, mediated by long-range effects, to an individual modulation of the local structure in the catalytic core of different hammerhead ribozymes.     

A hammerhead ribozyme substrate and reporter for in vitro kinetoplastid RNA editing

Current in vitro assays for RNA editing in kinetoplastids directly examine the products generated by incubation of pre-mRNA substrate with guide RNA (gRNA) and mitochondrial (mt) extract. RNA editing substrates that are modeled on hammerhead ribozymes were designed with catalytic cores that contained or lacked additional uridylates (Us). They proved to be sensitive reporters of editing activity when used for in vitro assays. A deletion editing substrate that is based on A6 pre-mRNA had no ribozyme activity, but its incubation with gRNA and mt extract resulted in its deletion editing and production of a catalytically active ribozyme. Hammerhead ribozymes are thus sensitive tools to assay in vitro RNA editing.