Molecular modeling of vimentin filament assembly

Intermediate-filament forming proteins are known to form rod-shaped dimers that are calculated to be 45 nm in length. Molecular modeling indicates that the dimerization is promoted by interchain hydrophobic interactions between sections of α helix β and helix. Further aggregation involves the formation of tetramers in which two dimers are anti-parallel and staggered to two characteristic degrees of overlap. Modeling indicated that the degrees of stagger are dictated by the association of sections of α helix in 4-chain bundles, in which hydrophobic side chains are sequestered from contact with water. The staggered arrangement of two dimers produces a tetramer having sections of 2-chain rod in which hydrophobic side chains are exposed to water. Extension of the tetramer to form protofilaments may be driven by associations with the 2-chain regions that reduce aqueous exposure of the hydrophobic side chains. Exposure of hydrophobic groups may be reduced by the 2-chain regions folding back upon themselves so that the entire tetramer becomes a 4-chain conformation. This prediction is in line with electron microscope data showing that mixtures of the lower oligomers contain rods of uniform thickness ranging upwards from 45 nm in a series having incremental increases in length. Data from previous chemical crosslinking studies support this model and also the idea that the completed intermediate filaments each consist of seven 4-chain protofilaments. Proteins 26:472–478 © 1996 Wiley-Liss, Inc.     

α-Helix-forming propensities in peptides and proteins

Much effort has been invested in seeking to understand the thermodynamic basis of helix stability in both peptides and proteins. Recently, several groups have measured the helix-forming propensities of individual residues (Lyu, P. C., Liff, M. I., Marky, L. A., Kallenbach, N. R. Science 250:669–673, 1990; O'Neil, K. T., DeGrado, W. F. Science 250:646–651, 1990; Padmanabhan, S., Marqusee, S., Ridgeway, T., Laue, T. M., Baldwin, R. L. Nature (London) 344:268–270, 1990). Using Monte Carlo computer simulations, we tested the hypothesis that these differences in measured helix-forming propensity are due primarily to loss of side chain conformational entropy upon helix formation (Creamer, T. P., Rose, G. D. Proc. Natl. Acad. Sci. U.S.A. 89:5937–5941, 1992). Our previous study employed a rigid helix backbone, which is here generalized to a completely flexible helix model in order to ensure that earlier results were not a methodological artifact. Using this flexible model, side chain rotamer distributions and entropy losses are calculated and shown to agree with those obtained earlier. We note that the side chain conformational entropy calculated for Trp in our previous study was in error; a corrected value is presented. Extending earlier work, calculated entropy losses are found to correlate strongly with recent helix propensity scales derived from substitutions made within protein helices (Horovitz, A., Matthews, J. M., Fersht, A. R. J. Mol. Biol. 227:560–568, 1992; Blaber, M., Zhang, X.-J., Matthews, B. M. Science 260:1637–1640, 1993). In contrast, little correlation is found between these helix propensity scales and the accessible surface area buried upon formation of a model polyalanyl α-helix. Taken in sum, our results indicate that loss of side chain entropy is a major determinant of the helix-forming tendency of residues in both peptide and protein helices. © 1994 Wiley-Liss, Inc.     

Automated design of the surface positions of protein helices.

Using a protein design algorithm that quantitatively considers side-chain interactions, the design of surface residues of alpha helices was examined. Three scoring functions were tested: a hydrogen-bond potential, a hydrogen-bond potential in conjunction with a penalty for uncompensated burial of polar hydrogens, and a hydrogen-bond potential in combination with helix propensity. The solvent exposed residues of a homodimeric coiled coil based on GCN4-p1 were designed by using the Dead-End Elimination Theorem to find the optimal amino acid sequence for each scoring function. The corresponding peptides were synthesized and characterized by circular dichroism spectroscopy and size exclusion chromatography. The designed peptides were dimeric and nearly 100% helical at 1 degree C, with melting temperatures from 69-72 degrees C, over 12 degrees C higher than GCN4-p1, whereas a random hydrophilic sequence at the surface positions produced a peptide that melted at 15 degrees C. Analysis of the designed sequences suggests that helix propensity is the key factor in sequence design for surface helical positions.     

Extrinsic interactions dominate helical propensity in coupled binding and folding of the lactose repressor protein hinge helix

A significant number of eukaryotic regulatory proteins are predicted to have disordered regions. Many of these proteins bind DNA, which may serve as a template for protein folding. Similar behavior is seen in the prokaryotic LacI/GalR family of proteins that couple hinge-helix folding with DNA binding. These hinge regions form short alpha-helices when bound to DNA but appear to be disordered in other states. An intriguing question is whether and to what degree intrinsic helix propensity contributes to the function of these proteins. In addition to its interaction with operator DNA, the LacI hinge helix interacts with the hinge helix of the homodimer partner as well as to the surface of the inducer-binding domain. To explore the hierarchy of these interactions, we made a series of substitutions in the LacI hinge helix at position 52, the only site in the helix that does not interact with DNA and/or the inducer-binding domain. The substitutions at V52 have significant effects on operator binding affinity and specificity, and several substitutions also impair functional communication with the inducer-binding domain. Results suggest that helical propensity of amino acids in the hinge region alone does not dominate function; helix-helix packing interactions appear to also contribute. Further, the data demonstrate that variation in operator sequence can overcome side chain effects on hinge-helix folding and/or hinge-hinge interactions. Thus, this system provides a direct example whereby an extrinsic interaction (DNA binding) guides internal events that influence folding and functionality.     

Exploring the sequence patterns in the alpha-helices of proteins

This paper reports an extensive sequence analysis of the alpha-helices of proteins. alpha-Helices were extracted from the Protein Data Bank (PDB) and were divided into groups according to their sizes. It was found that some amino acids had differential propensity values for adopting helical conformation in short, medium and long alpha-helices. Pro and Trp had a significantly higher propensity for helical conformation in short helices than in medium and long helices. Trp was the strongest helix conformer in short helices. Sequence patterns favoring helical conformation were derived from a neighbor-dependent sequence analysis of proteins, which calculated the effect of neighboring amino acid type on the propensity of residues for adopting a particular secondary structure in proteins. This method produced an enhanced statistical significance scale that allowed us to explore the positional preference of amino acids for alpha-helical conformations. It was shown that the amino acid pair preference for alpha-helix had a unique pattern and this pattern was not always predictable by assuming proportional contributions from the individual propensity values of the amino acids. Our analysis also yielded a series of amino acid dyads that showed preference for alpha-helix conformation. The data presented in this study, along with our previous study on loop sequences of proteins, should prove useful for developing potential 'codes' for recognizing sequence patterns that are favorable for specific secondary structural elements in proteins.     

Helix propensities of the amino acids measured in alanine-based peptides without helix-stabilizing side-chain interactions.

Helix propensities of the amino acids have been measured in alanine-based peptides in the absence of helix-stabilizing side-chain interactions. Fifty-eight peptides have been studied. A modified form of the Lifson-Roig theory for the helix-coil transition, which includes helix capping (Doig AJ, Chakrabartty A, Klingler TM, Baldwin RL, 1994, Biochemistry 33:3396-3403), was used to analyze the results. Substitutions were made at various positions of homologous helical peptides. Helix-capping interactions were found to contribute to helix stability, even when the substitution site was not at the end of the peptide. Analysis of our data with the original Lifson-Roig theory, which neglects capping effects, does not produce as good a fit to the experimental data as does analysis with the modified Lifson-Roig theory. At 0 degrees C, Ala is a strong helix former, Leu and Arg are helix-indifferent, and all other amino acids are helix breakers of varying severity. Because Ala has a small side chain that cannot interact significantly with other side chains, helix formation by Ala is stabilized predominantly by the backbone ("peptide H-bonds"). The implication for protein folding is that formation of peptide H-bonds can largely offset the unfavorable entropy change caused by fixing the peptide backbone. The helix propensities of most amino acids oppose folding; consequently, the majority of isolated helices derived from proteins are unstable, unless specific side-chain interactions stabilize them.     

Structural similarities between glutamate receptor channels and K(+) channels examined by scanning mutagenesis

The pores of glutamate receptors and K(+) channels share sequence homology, suggesting a conserved secondary structure. Scanning mutagenesis with substitution of alanine and tryptophan in GluR6 channels was performed based on the structure of KcsA. Our assay used disruption of voltage-dependent polyamine block to test for changes in the packing of pore-forming regions. Alanine scanning from D567 to R603 revealed reduced rectification resulting from channel block in two regions. A periodic pattern from F575 to M589 aligned with the pore helix in KcsA, whereas a cluster of sensitive positions around Q590, a site regulated by RNA editing, mapped to the selectivity filter in KcsA. Tryptophan scanning from D567 to R603 revealed similar patterns, but with a complete disruption of spermine block for 7 out of the 37 positions and a pM dissociation constant for Q590W. Molecular modeling with KcsA coordinates showed that GluR6 pore helix mutants disrupting polyamine block pack against M1 and M2, and are not exposed in the ion channel pore. In the selectivity filter, tryptophan creates an aromatic cage consistent with the pM dissociation constant for Q590W. A scan with glutamate substitution was used to map the cytoplasmic entrance to the pore based on charge neutralization experiments, which established that E594 was uniquely required for high affinity polyamine block. In E594Q mutants, introduction of glutamate at positions S593-L600 restored polyamine block at positions corresponding to surface-exposed residues in KcsA. Our results reinforce proposals that the pore region of glutamate receptors contains a helix and pore loop analogous to that found in K(+) channels. At the cytoplasmic entrance of the channel, a negatively charged amino acid, located in an extended loop with solvent-exposed side chains, is required for high affinity polyamine block and probably attracts cations via a through space electrostatic mechanism.     

Anticooperativity in a Glu-Lys-Glu salt bridge triplet in an isolated alpha-helical peptide

Salt bridges between oppositely charged side chains are well-known to stabilize protein structure, though their contributions vary considerably. Here we study Glu-Lys and Lys-Glu salt bridges, formed when the residues are spaced i, i + 4 surface of an isolated alpha-helix in aqueous solution. Both are stabilizing by -0.60 and -1.02 kcal/mol, respectively, when the interacting residues are fully charged. When the side chains are spaced i, i + 4, i + 8, forming a Glu-Lys-Glu triplet, the second salt bridge provides no additional stabilization to the helix. We attribute this to the inability of the central Lys to form two salt bridges simultaneously. Analysis of these salt bridges in protein structures shows that the Lys-Glu interaction is dominant, with the side chains of the Glu-Lys pair far apart.     

Direct determination of the π-helix structure and helix transition behavior of poly(β-phenethyl l-aspartate) via synchrotron X-ray diffraction

The helix-sense inversions of poly(β-phenethyl l -aspartate) (2P) and diblock copolymers (2P-3P), with 2P and poly(β-phenylpropyl l -aspartate) (3P) blocks, were studied in their solid states using synchrotron wide-angle X-ray diffraction and small-angle X-ray scattering. The characteristic parameters of the π-helix structure of 2P were directly determined in situ after the helix transition at a high temperature. In the 2P-3P block copolymers, the main chains of the 3P blocks initially convert from right- to left-handed α-helices, and then the 2P blocks convert irreversibly from right-handed α-helices to left-handed π-helices. The chemical structures of the side chains of poly(l -aspartic acid ester)s significantly affect their helix transition behaviors.     

Comprehensive analysis of the helix-X-helix motif in soluble proteins

Alpha-helices are the most common secondary structures found in globular proteins. In this report, we analyze the stereochemical and sequence properties of helix-X-helix (HXH) motifs in which two alpha-helices are linked by a single residue, in search of characteristic structures and sequence signals. The analysis is carried out on a database of 837 nonredundant HXH motifs. The kinks are characterized by the bend angle between the axes of the N-terminal and C-terminal helices and the wobble angle corresponding to the rotation of C-terminal helix axis on the plane perpendicular to the N-terminal one. The phi-psi dihedral angles of the linker residue are clustered in six distinct areas of the Ramachandran plot: two areas are located in the additional allowed alpha region (alpha(1) and alpha(2)), two areas are in the additional allowed beta region (beta(1) and beta(2)) and two areas have positive phi values (alpha(L) and beta(M)). Each phi/psi region corresponds to characteristic bend and wobble angles and amino acid distributions. Bend angles can vary from 0 degrees to 160 degrees. Most wobble angles correspond to a counter-clockwise rotation of the C-terminal helix. Proline residues are rigorously excluded from the linker position X but have a high propensity at position X+1 of the beta(1) and beta(2) motifs (12 and 7, respectively) and at position X+3 of the alpha(1) motifs (9). Glycine linkers are located either in the alpha(L) region (20%) or in the beta(M) region (80%). This latter conformation is characterized by a marked bend angle (124 degrees +/- 18 degrees) and a clockwise wobble. Among other amino acids, Asn is remarkable for its high propensity (>3) at the linker position of the alpha(2), beta(1), and beta(2) motifs. Stabilization of HXH motifs by H-bonds between polar side chains of the linker and polar groups of the backbone is determined. A method based on position-specific scoring matrices is developed for conformational prediction. The accuracy of the predictions reaches 80% when the method is applied to proline-induced kinks or to kinks with bend angles in the 50 degrees-100 degrees range.     

Molecular dynamics study of structure and stability of a model coiled coil

This paper employs methods used earlier to study helix propensity in a model α-helix. The methods are extended to simulations of a motif structure of the α-helical coiled coil, i.e., a structure with a simple amino acid sequence, containing only alanine, leucine, and valine, with leucine and valine forming hydrophobic contacts in the helix interface (positions “d” and “a”). Dynamic simulations of the model coiled-coil structure reproduce characteristic features of the coiled-coil motif seen in experimental studies. Free energy simulations were used to assess the change in stability of the model when a leucine pair or a valine pair in the helix interface was replaced with an alanine pair. A leucine pair at position d was found to contribute 3.4 kcal/mol to the stability of the coiled coil relative to an alanine pair, and a valine pair at postion a was found to contribute 0.8 kcal/mol relative to an alanine pair. The value for the leucine pair agrees with reports in two experimental studies with molecules having different amino sequence. The value for the valine pair is reasonable given the smaller size of the valine side chain and the intrinsic low helix propensity of valine. No experimental value was available for comparison. © 1993 Wiley-Liss, Inc.     

Effects of alanine substitutions in alpha-helices of sperm whale myoglobin on protein stability.

The peptide backbones in folded native proteins contain distinctive secondary structures, alpha-helices, beta-sheets, and turns, with significant frequency. One question that arises in folding is how the stability of this secondary structure relates to that of the protein as a whole. To address this question, we substituted the alpha-helix-stabilizing alanine side chain at 16 selected sites in the sequence of sperm whale myoglobin, 12 at helical sites on the surface of the protein, and 4 at obviously internal sites. Substitution of alanine for bulky side chains at internal sites destabilizes the protein, as expected if packing interactions are disrupted. Alanine substitutions do not uniformly stabilize the protein, either in capping positions near the ends of helices or at mid-helical sites near the surface of myoglobin. When corrected for the extent of exposure of each side chain replaced by alanine at a mid-helix position, alanine replacement still has no clear effect in stabilizing the native structure. Thus linkage between the stabilization of secondary structure and tertiary structure in myoglobin cannot be demonstrated, probably because of the relatively small free energy differences between side chains in stabilizing isolated helix. By contrast, about 80% of the variance in free energy observed can be accounted for by the loss in buried surface area of the native residue substituted by alanine. The differential free energy of helix stabilization does not account for any additional variation.     

A novel motif in geminivirus replication proteins interacts with the plant retinoblastoma-related protein

The geminivirus replication factor AL1 interacts with the plant retinoblastoma-related protein (pRBR) to modulate host gene expression. The AL1 protein of tomato golden mosaic virus (TGMV) binds to pRBR through an 80-amino-acid region that contains two highly predicted α-helices designated 3 and 4. Earlier studies suggested that the helix 4 motif, whose amino acid sequence is strongly conserved across geminivirus replication proteins, plays a role in pRBR binding. We generated a series of alanine substitutions across helix 4 of TGMV AL1 and examined their impact on pRBR binding using yeast two-hybrid assays. These experiments showed that several helix 4 residues are essential for efficient pRBR binding, with a critical residue being a leucine at position 148 in the middle of the motif. Various amino acid substitutions at leucine-148 indicated that both structural and side chain components contribute to pRBR binding. The replication proteins of the geminiviruses tomato yellow leaf curl virus and cabbage leaf curl virus (CaLCuV) also bound to pRBR in yeast dihybrid assays. Mutation of the leucine residue in helix 4 of CaLCuV AL1 reduced binding. Together, these results suggest that helix 4 and the conserved leucine residue are part of a pRBR-binding interface in begomovirus replication proteins.     

Distinction between dipolar and inductive effects in modulating the conductance of gramicidin channels.

The ion permeability of transmembrane channels formed by the linear gramicidins is altered by amino acid sequence substitutions. We have previously shown that the polarity of the side chain at position one is important in modulating a channel's conductance and ion selectivity [Russel et al. (1986) Biophys. J. 49, 673-686]. Changes in polarity could alter ion permeability by (through-space) ion-dipole interactions or by (through-bond) inductive electron shifts. We have addressed this question by investigating the permeability characteristics of channels formed by gramicidins where the NH2-terminal amino acid is either phenylalanine or one of a series of substituted phenylalanines: p-hydroxy-, p-methoxy-, o-fluoro-, m-fluoro-, or p-fluorophenylalanine. The electron-donating or -withdrawing nature, as quantified by the Hammett constant, ranges from -0.37 to +0.34 for these side chains. Channels formed by these gramicidins show a more than 2.5-fold variation in their Na+ conductance, but the conductance variations do not rank in the order of the Hammett constants of the side chains. Inductive effects cannot therefore be of primary importance in the modulation of the gramicidin single-channel conductance by these side chains. The results support previous suggestions that electrostatic interactions between side chain dipoles and permeating ions can modify the energy profile for ion movement through the gramicidin channel and thus alter the conductance.     

Side chains at the membrane-water interface modulate the signaling state of a transmembrane receptor

Previous model studies of peptides and proteins have shown that protein-lipid interactions, primarily involving amino acid side chains near the membrane-water interface, modulate the position of transmembrane helices in bilayers. The present study examines whether such interfacial side chains stabilize the signaling states of a transmembrane signaling helix in a representative receptor, the aspartate receptor of bacterial chemotaxis. To examine the functional roles of signaling helix side chains at the periplasmic and cytoplasmic membrane-water interfaces, arginine and cysteine substitutions were scanned through these two interfacial regions. The chemical reactivities of the cysteine residues were first measured to determine the positions at which the helix crosses the membrane-water interface in both the periplasmic and cytoplasmic compartments. Subsequently, two antisymmetric in vitro activity measurements were carried out to determine the effect of each interfacial arginine or cysteine substitution on receptor signaling. Substitutions that stabilize the receptor on-state cause upregulation of receptor-coupled kinase activity and inhibition of methylation at receptor adaptation sites, while substitutions that stabilize the off-state have the opposite effects on these two activities. Notably, four substitutions at aromatic tryptophan and phenylalanine positions buried in the membrane near the membrane-water interface were found to stabilize the native on- or off-signaling state. The striking ability of these substitutions to drive the receptor toward a specific signaling state indicates that interfacial side chains are highly optimized to correctly position the native signaling helix in the membrane and to allow normal switching between the on- and off-signaling states. The analogous substitutions in model transmembrane helices are known to drive small piston-type displacements of the helix normal to the membrane. Thus, the simplest molecular interpretation of the present findings is that the signal-stabilizing substitutions drive piston displacements of the signaling helix, providing further support for the piston model for transmembrane signaling in bacterial chemoreceptors. More generally, the findings indicate that the interfacial phenylalanine, tryptophan, and arginine side chains widespread in the transmembrane alpha-helices of receptors, channels, and transporters can play important roles in modulating transitions between signaling and conformational states.     

Noncharged amino acid residues at the solvent-exposed positions in the middle and at the C terminus of the alpha-helix have the same helical propensity

It was established previously that helical propensities of different amino acid residues in the middle of α‐helix in peptides and in proteins are very similar. The statistical analysis of the protein helices from the known three‐dimensional structures shows no difference in the frequency of noncharged residues in the middle and at the C terminus. Yet, experimental studies show distinctive differences for the helical propensities of noncharged residues in the middle and in the C terminus in model peptides. Is this a general effect, and is it applicable to protein helices or is it specific to the model alanine‐based peptides? To answer this question, the effects of substitutions at positions 28 (middle residue) and 32 (C2 position at the C terminus) of the α‐helix of ubiquitin on the stability of this protein are measured by using differential scanning calorimetry. The two data sets produce similar values for intrinsic helix propensity, leading to a conclusion that noncharged amino acid residues at the solvent‐exposed positions in the middle and at the C terminus of the α‐helix have the same helical propensity. This conclusion is further supported with an excellent correlation between the helix propensity scale obtained for the two positions in ubiquitin with the experimental helix propensity scale established previously and with the statistical distribution of the residues in protein helices.     

Design and synthesis of the pseudo-EF hand in calbindin D9K: effect of amino acid substitutions in the alpha-helical regions

A series of 37-residue analogues of the pseudo-EF hand in bovine calbindin D9K has been synthesized by the solid phase method. In the presence of calcium an alpha-helical induction of up to 44% was observed for the peptide with the native sequence with a Kd for calcium binding of 0.35 mM. A number of amino acid substitutions have been carried out to study the packing of the two alpha-helices based on the crystal structure of the entire protein. Three strategies were employed: (1) replacement of the Leu residues, which in the crystal structure do not contribute to the hydrophobic interaction between the two helices, by Gln or Ala in order to control the orientation of the helix packing, (2) stabilization of the individual helix by introducing a Glu-...Lys+ salt bridge or by changing the N-terminal charge to compensate for the helix dipole moment, and (3) introduction of a disulfide bond between the two helices to help the packing of the helices. The mutants with the substitution of (Leu-30, Leu-32) to (Gln-30, Gln-32), (Gln-30, Ala-32), and (Ala-30,Ala-32) designed based on the strategy 1 do not show any affinity for calcium and have low alpha-helicity. The Leu-30 to Lys-30 mutant designed to form a salt bridge between the side chains of Glu-26 and Lys-30 has an apparent Kd for calcium of 6.8 mM. Kd of the N-terminal acetylated and succinylated mutants are 0.41 and 0.45 mM, respectively, and no increase in the alpha-helix content relative to that of the natural sequence peptide is observed. The disulfide containing mutants, namely Tyr-13, Leu-31 to Cys-13, Cys-31 and Tyr-13, Leu-31 to Cys-13, hCys-31, show apparent Kd values of 0.93 and 2.1 mM, respectively. The former mutant shows the highest alpha-helix content among the peptides studied in the presence and absence of calcium. While it is difficult to construct an isolated and rigid helix-loop-helix motif with peptides of this size, introduction of a disulfide bond proved to be effective for this purpose.     

Rationale for Bcl-xL/Bad peptide complex formation from structure, mutagenesis, and biophysical studies

The three-dimensional structure of the anti-apoptotic protein Bcl-xL complexed to a 25-residue peptide from the death promoting region of Bad was determined using NMR spectroscopy. Although the overall structure is similar to Bcl-xL bound to a 16-residue peptide from the Bak protein (Sattler et al., 1997), the Bad peptide forms additional interactions with Bcl-xL. However, based upon site-directed mutagenesis experiments, these additional contacts do not account for the increased affinity of the Bad 25-mer for Bcl-xL compared to the Bad 16-mer. Rather, the increased helix propensity of the Bad 25-mer is primarily responsible for its greater affinity for Bcl-xL. Based on this observation, a pair of 16-residue peptides were designed and synthesized that were predicted to have a high helix propensity while maintaining the interactions important for complexation with Bcl-xL. Both peptides showed an increase in helix propensity compared to the wild-type and exhibited an enhanced affinity for Bcl-xL.     

Identification of the individual residues that determine human CD59 species selective activity

Formation of the cytolytic membrane attack complex of complement on host cells is inhibited by the membrane-bound glycoprotein, CD59. The inhibitory activity of CD59 is species restricted, and human CD59 is not effective against rat complement. Previous functional analysis of chimeric human/rat CD59 proteins indicated that the residues responsible for the species selective function of human CD59 map to a region contained between positions 40 and 66 in the primary structure. By comparative analysis of rat and human CD59 models and by mutational analysis of candidate residues, we now identify the individual residues within the 40-66 region that confer species selective function on human CD59. All nonconserved residues within the 40-66 sequence were substituted from human to rat residues in a series of chimeric human/rat CD59 mutant proteins. Functional analysis revealed that the individual human to rat residue substitutions F47A, T51L, R55E, and K65Q each produced a mutant human CD59 protein with enhanced rat complement inhibitory activity with the single F47A substitution having the most significant effect. Interestingly, the side chains of the residues at positions 47, 51, and 55 are all located on the short single helix (residues 47-55) of CD59 and form an exposed continuous strip parallel to the helix axis. A single human CD59 mutant protein containing rat residue substitutions at all three helix residues produced a protein with species selective activity comparable to that of rat CD59. We further found that synthetic peptides spanning the human CD59 helix sequence were able to inhibit the binding of human CD59 to human C8, but had little effect on the binding of rat CD59 to rat C8.     

基于小波分析的膜蛋白跨膜区段序列分析和预测

膜蛋白是一类结构独特的蛋白质,在各种细胞中普遍存在,发挥着重要的生理功能。目前仅有少数膜蛋白听结构被实验测出,因此用计算机预测膜蛋白的结构是蛋白质结构预测的主要研究内容之一。膜蛋白一般在膜上形成保守的跨膜螺旋结构,序列特征明显,比较适合用预测的方法确定跨膜螺旋区段的位置。国际上已有一些研究者用人工神经网络方法、多序列比对方法和统计方法进行了预测尝试,取得了一定的成功经验。我们对蛋白质序列数据库中的