Mapping quantitative trait loci by genotyping haploid tissues.

Mapping strategies based on a half- or full-sib family design have been developed to map quantitative trait loci (QTL) for outcrossing species. However, these strategies are dependent on controlled crosses where marker-allelic frequency and linkage disequilibrium between the marker and QTL may limit their application. In this article, a maximum-likelihood method is developed to map QTL segregating in an open-pollinated progeny population using dominant markers derived from haploid tissues from single meiotic events. Results from the haploid-based mapping strategy are not influenced by the allelic frequencies of markers and their linkage disequilibria with QTL, because the probabilities of QTL genotypes conditional on marker genotypes of haploid tissues are independent of these population parameters. Parameter estimation and hypothesis testing are implemented via expectation/conditional maximization algorithm. Parameters estimated include the additive effect, the dominant effect, the population mean, the chromosomal location of the QTL in the interval, and the residual variance within the QTL genotypes, plus two population parameters, outcrossing rate and QTL-allelic frequency. Simulation experiments show that the accuracy and power of parameter estimates are affected by the magnitude of QTL effects, heritability levels of a trait, and sample sizes used. The application and limitation of the method are discussed.     

Using molecular markers to map multiple quantitative trait loci: models for backcross,recombinant inbred,and doubled haploid progeny

Summary To maximize parameter estimation efficiency and statistical power and to estimate epistasis, the parameters of multiple quantitative trait loci (QTLs) must be simultaneously estimated. If multiple QTL affect a trait, then estimates of means of QTL genotypes from individual locus models are statistically biased. In this paper, I describe methods for estimating means of QTL genotypes and recombination frequencies between marker and quantitative trait loci using multilocus backcross, doubled haploid, recombinant inbred, and testcross progeny models. Expected values of marker genotype means were defined using no double or multiple crossover frequencies and flanking markers for linked and unlinked quantitative trait loci. The expected values for a particular model comprise a system of nonlinear equations that can be solved using an interative algorithm, e.g., the Gauss-Newton algorithm. The solutions are maximum likelihood estimates when the errors are normally distributed. A linear model for estimating the parameters of unlinked quantitative trait loci was found by transforming the nonlinear model. Recombination frequency estimators were defined using this linear model. Certain means of linked QTLs are less efficiently estimated than means of unlinked QTLs.     

QTL detection with bidirectional and unidirectional selective genotyping: marker-based and trait-based analyses

Selective genotyping of one or both phenotypic extremes of a population can be used to detect linkage between markers and quantitative trait loci (QTL) in situations in which full-population genotyping is too costly or not feasible, or where the objective is to rapidly screen large numbers of potential donors for useful alleles with large effects. Data may be subjected to 'trait-based' analysis, in which marker allele frequencies are compared between classes of progeny defined based on trait values, or to 'marker-based' analysis, in which trait means are compared between progeny classes defined based on marker genotypes. Here, bidirectional and unidirectional selective genotyping were simulated, using population sizes and selection intensities relevant to cereal breeding. Control of Type I error was usually adequate with marker-based analysis of variance or trait-based testing using the normal approximation of the binomial distribution. Bidirectional selective genotyping was more powerful than unidirectional. Trait-based analysis and marker-based analysis of variance were about equally powerful. With genotyping of the best 30 out of 500 lines (6%), a QTL explaining 15% of the phenotypic variance could be detected with a power of 0.8 when tests were conducted at a marker 10 cM from the QTL. With bidirectional selective genotyping, QTL with smaller effects and (or) QTL farther from the nearest marker could be detected. Similar QTL detection approaches were applied to data from a population of 436 recombinant inbred rice lines segregating for a large-effect QTL affecting grain yield under drought stress. That QTL was reliably detected by genotyping as few as 20 selected lines (4.5%). In experimental populations, selective genotyping can reduce costs of QTL detection, allowing larger numbers of potential donors to be screened for useful alleles with effects across different backgrounds. In plant breeding programs, selective genotyping can make it possible to detect QTL using even a limited number of progeny that have been retained after selection.     

Optimal sampling of a population to determine QTL location, variance, and allelic number

In a population intended for breeding and selection, questions of interest relative to a specific segregating QTL are the variance it generates in the population, and the number and effects of its alleles. One approach to address these questions is to extract several inbreds from the population and use them to generate multiple mapping families. Given random sampling of parents, sampling strategy may be an important factor determining the power of the analysis and its accuracy in estimating QTL variance and allelic number. We describe appropriate multiple-family QTL mapping methodology and apply it to simulated data sets to determine optimal sampling strategies in terms of family number versus family size. Genomes were simulated with seven chromosomes, on which 107 markers and six QTL were distributed. The total heritability was 0.60. Two to ten alleles were segregating at each QTL. Sampling strategies ranged from sampling two inbreds and generating a single family of 600 progeny to sampling 40 inbreds and generating 40 families of 15 progeny each. Strategies involving only one to five families were subject to variation due to the sampling of inbred parents. For QTL where more than two alleles were segregating, these strategies did not sample QTL alleles representative of the original population. Conversely, strategies involving 30 or more parents were subject to variation due to sampling of QTL genotypes within the small families obtained. Given these constraints, greatest QTL detection power was obtained for strategies involving five to ten mapping families. The most accurate estimation of the variance generated by the QTL, however, was obtained with strategies involving 20 or more families. Finally, strategies with an intermediate number of families best estimated the number of QTL alleles. We conclude that no overall optimal sampling strategy exists but that the strategy adopted must depend on the objective.Communicated by P. Langridge     

Cooperative ligand-lattice binding. Approximate Gaussian binding distribution

Nearest-neighbor cooperative binding of a ligand covering n sites and binding with equilibrium constant K and cooperativity factor omega to a large molecule with m binding sites (m much greater than n omega, n/omega) can be approximately described by a Gaussian distribution P(q-qmax), where q is the number of ligands bound and qmax the most probable value of q. The variance of the Gaussian is equal to the derivative dqmax/d ln(L), where L is the free ligand concentration. This variance, sigma 2, is a complicated function of qmax. However, in the limits of very large cooperativity, omega much greater than 1, very large anticooperativity, omega much less than 1, or noncooperativity, omega = 1, simpler expressions for sigma 2 can be given. For qmax = m/(n + 1), where the most probable number of bound ligands equals the number of free binding sites, sigma 2 has a particularly simple form: sigma 2 = 2m omega 1/2/(n + 1)3. The Gaussian and the infinite lattice approximations for the average number of ligands bound are good approximations only if sigma is much smaller than the number of binding sites. The variance may therefore provide an easy check on the validity of the infinite lattice approximation, which is commonly used to analyze experimental binding data.     

Mapping quantitative trait loci using molecular marker linkage maps

Summary High-density restriction fragment length polymorphism (RFLP) and allozyme linkage maps have been developed in several plant species. These maps make it technically feasible to map quantitative trait loci (QTL) using methods based on flanking marker genetic models. In this paper, we describe flanking marker models for doubled haploid (DH), recombinant inbred (RI), backcross (BC), F₁ testcross (F₁TC), DH testcross (DHTC), recombinant inbred testcross (RITC), F₂, and F₃ progeny. These models are functions of the means of quantitative trait locus genotypes and recombination frequencies between marker and quantitative trait loci. In addition to the genetic models, we describe maximum likelihood methods for estimating these parameters using linear, nonlinear, and univariate or multivariate normal distribution mixture models. We defined recombination frequency estimators for backcross and F₂ progeny group genetic models using the parameters of linear models. In addition, we found a genetically unbiased estimator of the QTL heterozygote mean using a linear function of marker means. In nonlinear models, recombination frequencies are estimated less efficiently than the means of quantitative trait locus genotypes. Recombination frequency estimation efficiency decreases as the distance between markers decreases, because the number of progeny in recombinant marker classes decreases. Mean estimation efficiency is nearly equal for these methods.     

Mapping quantitative trait loci in F2 incorporating phenotypes of F3 progeny

In plants and laboratory animals, QTL mapping is commonly performed using F(2) or BC individuals derived from the cross of two inbred lines. Typical QTL mapping statistics assume that each F(2) individual is genotyped for the markers and phenotyped for the trait. For plant traits with low heritability, it has been suggested to use the average phenotypic values of F(3) progeny derived from selfing F(2) plants in place of the F(2) phenotype itself. All F(3) progeny derived from the same F(2) plant belong to the same F(2:3) family, denoted by F(2:3). If the size of each F(2:3) family (the number of F(3) progeny) is sufficiently large, the average value of the family will represent the genotypic value of the F(2) plant, and thus the power of QTL mapping may be significantly increased. The strategy of using F(2) marker genotypes and F(3) average phenotypes for QTL mapping in plants is quite similar to the daughter design of QTL mapping in dairy cattle. We study the fundamental principle of the plant version of the daughter design and develop a new statistical method to map QTL under this F(2:3) strategy. We also propose to combine both the F(2) phenotypes and the F(2:3) average phenotypes to further increase the power of QTL mapping. The statistical method developed in this study differs from published ones in that the new method fully takes advantage of the mixture distribution for F(2:3) families of heterozygous F(2) plants. Incorporation of this new information has significantly increased the statistical power of QTL detection relative to the classical F(2) design, even if only a single F(3) progeny is collected from each F(2:3) family. The mixture model is developed on the basis of a single-QTL model and implemented via the EM algorithm. Substantial computer simulation was conducted to demonstrate the improved efficiency of the mixture model. Extension of the mixture model to multiple QTL analysis is developed using a Bayesian approach. The computer program performing the Bayesian analysis of the simulated data is available to users for real data analysis.     

Identification of Quantitative Trait Loci Influencing Wood Specific Gravity in an Outbred Pedigree of Loblolly Pine

We report the identification of quantitative trait loci (QTL) influencing wood specific gravity (WSG) in an outbred pedigree of loblolly pine (Pinus taeda L.). QTL mapping in an outcrossing species is complicated by the presence of multiple alleles (>2) at QTL and marker loci. Multiple alleles at QTL allow the examination of interaction among alleles at QTL (deviation from additive gene action). Restriction fragment length polymorphism (RFLP) marker genotypes and wood specific gravity phenotypes were determined for 177 progeny. Two RFLP linkage maps were constructed, representing maternal and paternal parent gamete segregations as inferred from diploid progeny RFLP genotypes. RFLP loci segregating for multiple alleles were vital for aligning the two maps. Each RFLP locus was assayed for cosegregation with WSG QTL using analysis of variance (ANOVA). Five regions of the genome contained one or more RFLP loci showing differences in mean WSG at or below the P = 0.05 level for progeny as grouped by RFLP genotype. One region contained a marker locus (S6a) whose QTL-associated effects were highly significant (P > 0.0002). Marker S6a segregated for multiple alleles, a prerequisite for determining the number of alleles segregating at the linked QTL and analyzing the interactions among QTL alleles. The QTL associated with marker S6a appeared to be segregating for multiple alleles which interacted with each other and with environments. No evidence for digenic epistasis was found among the five QTL.     

Efficiency of population structures for mapping of Mendelian and imprinted quantitative trait loci in outbred pigs using variance component methods

In a simulation study different designs for a pure line pig population were compared for efficiency of mapping QTL using the variance component method. Phenotypes affected by a Mendelian QTL, a paternally expressed QTL, a maternally expressed QTL or by a QTL without an effect were simulated. In all alternative designs 960 progeny were phenotyped. Given the limited number of animals there is an optimum between the number of families and the family size. Estimation of Mendelian and parentally expressed QTL is more efficient in a design with large family sizes. Too small a number of sires should be avoided to minimize chances of sires to be non-segregating. When a large number of families is used, the number of haplotypes increases which reduces the accuracy of estimating the QTL effect and thereby reduces the power to show a significant QTL and to correctly position the QTL. Dense maps allow for smaller family size due to exploitation of LD-information. Given the different possible modes of inheritance of the QTL using 8 to16 boars, two litters per dam was optimal with respect to determining significance and correct location of the QTL for a data set consisting of 960 progeny. The variance component method combining linkage disequilibrium and linkage analysis seems to be an appropriate choice to analyze data sets which vary in marker density and which contain complex family structures.     

Contribution of maternal effect QTL to genetic architecture of early growth in mice

Existing approaches to characterizing quantitative trait loci (QTL) utilize a paradigm explicitly focused on the direct effects of genes, where phenotypic variation among individuals is mapped onto genetic variation of those individuals. For many characters, however, the genotype of the mother via its maternal effect accounts for a considerable portion of the genetically based variation in progeny phenotypes. Thus the focus on direct effect QTL may result in an insufficient or misleading characterization of genetic architecture due to the omission of the potentially important source of genetic variance contributed by maternal effects. We analyze the relative contribution of direct and maternal effect (ME) QTL to early growth in mice using a three-generation intercross of the Small (SM/J) and Large (LG/J) inbred mouse lineages. Using interval mapping and composite interval mapping, direct effect (DE) QTL for early growth (change in body mass during the interval from week 1 to 2) were detected in the F(2) generation of the intercross (n = 510), where no maternal genetic effect variance is present (all individuals are progeny of genetically identical F(1) mothers). ME QTL were detected by treating the phenotypes of cross-fostered F(3) pups as a characteristic of their nurse-dam (n = 168 dams with cross-fostered progeny). Five DE QTL, significant at a chromosome wide level (alpha = 0.05), were detected, with two significant at a genome wide level. FourME QTL significant at the chromosome wide level were detected, with three significant at the genome wide level. A model containing only DE QTL accounted for 11.8% of phenotypic variance, while a model containing only ME QTL accounted for 31.5% of the among litter variance in growth. There was no evidence for pleiotropy of DE and ME loci since there was no overlap between loci detected in these two analyses. Epistasis between all pairs of loci was analyzed for both DEs and MEs. Ten pairs of loci showed significant epistasis for MEs (alpha = 0.05 corrected for multiple comparisons) while four pairs showed significant epistasis for DEs on early growth.     

Mapping quantitative trait loci using naturally occurring genetic variance among commercial inbred lines of maize (Zea mays L.)

Many commercial inbred lines are available in crops. A large amount of genetic variation is preserved among these lines. The genealogical history of the inbred lines is usually well documented. However, quantitative trait loci (QTL) responsible for the genetic variances among the lines are largely unexplored due to lack of statistical methods. In this study, we show that the pedigree information of the lines along with the trait values and marker information can be used to map QTL without the need of further crossing experiments. We develop a Monte Carlo method to estimate locus-specific identity-by-descent (IBD) matrices. These IBD matrices are further incorporated into a mixed-model equation for variance component analysis. QTL variance is estimated and tested at every putative position of the genome. The actual QTL are detected by scanning the entire genome. Applying this new method to a well-documented pedigree of maize (Zea mays L.) that consists of 404 inbred lines, we mapped eight QTL for the maize male flowering trait, growing degree day heat units to pollen shedding (GDUSHD). These detected QTL contributed >80% of the variance observed among the inbred lines. The QTL were then used to evaluate all the inbred lines using the best linear unbiased prediction (BLUP) technique. Superior lines were selected according to the estimated QTL allelic values, a technique called marker-assisted selection (MAS). The MAS procedure implemented via BLUP may be routinely used by breeders to select superior lines and line combinations for development of new cultivars.     

Methodology and Accuracy of Estimation of Quantitative Trait Loci Parameters in a Half-Sib Design Using Maximum Likelihood

Maximum likelihood methods were developed for estimation of the six parameters relating to a marker-linked quantitative trait locus (QTL) segregating in a half-sib design, namely the QTL additive effect, the QTL dominance effect, the population mean, recombination between the marker and the QTL, the population frequency of the QTL alleles, and the within-family residual variance. The method was tested on simulated stochastic data with various family structures under two genetic models. A method for predicting the expected value of the likelihood was also derived and used to predict the lower bound sampling errors of the parameter estimates and the correlations between them. It was found that standard errors and confidence intervals were smallest for the population mean and variance, intermediate for QTL effects and allele frequency, and highest for recombination rate. Correlations among standard errors of the parameter estimates were generally low except for a strong negative correlation (r = -0.9) between the QTL's dominance effect and the population mean, and medium positive and negative correlations between the QTL's additive effect and, respectively, recombination rate (r = 0.5) and residual variance (r = -0.6). The implications for experimental design and method of analysis on power and accuracy of marker-QTL linkage experiments were discussed.     

Quantitative trait locus (QTL) mapping using different testers and independent population samples in maize reveals low power of QTL detection and large bias in estimates of QTL effects.

The efficiency of marker-assisted selection (MAS) depends on the power of quantitative trait locus (QTL) detection and unbiased estimation of QTL effects. Two independent samples N = 344 and 107 of F2 plants were genotyped for 89 RFLP markers. For each sample, testcross (TC) progenies of the corresponding F3 lines with two testers were evaluated in four environments. QTL for grain yield and other agronomically important traits were mapped in both samples. QTL effects were estimated from the same data as used for detection and mapping of QTL (calibration) and, based on QTL positions from calibration, from the second, independent sample (validation). For all traits and both testers we detected a total of 107 QTL with N = 344, and 39 QTL with N = 107, of which only 20 were in common. Consistency of QTL effects across testers was in agreement with corresponding genotypic correlations between the two TC series. Most QTL displayed no significant QTL x environment nor epistatic interactions. Estimates of the proportion of the phenotypic and genetic variance explained by QTL were considerably reduced when derived from the independent validation sample as opposed to estimates from the calibration sample. We conclude that, unless QTL effects are estimated from an independent sample, they can be inflated, resulting in an overly optimistic assessment of the efficiency of MAS.     

Using quantitative trait loci results to discriminate among crosses on the basis of their progeny mean and variance

To develop inbred lines, parents are crossed to generate segregating populations from which superior inbred progeny are selected. The value of a particular cross thus depends on the expected performance of its best progeny, which we call the superior progeny value. Superior progeny value is a linear combination of the mean of the cross's progeny and their standard deviation. In this study we specify theory to predict a cross's progeny standard deviation from QTL results and explore analytically and by simulation the variance of that standard deviation under different genetic models. We then study the impact of different QTL analysis methods on the prediction accuracy of a cross's superior progeny value. We show that including all markers, rather than only markers with significant effects, improves the prediction. Methods that account for the uncertainty of the QTL analysis by integrating over the posterior distributions of effect estimates also produce better predictions than methods that retain only point estimates from the QTL analysis. The utility of including estimates of a cross's among-progeny standard deviation in the prediction increases with increasing heritability and marker density but decreasing genome size and QTL number. This utility is also higher if crosses are envisioned only among the best parents rather than among all parents. Nevertheless, we show that among crosses the variance of progeny means is generally much greater than the variance of progeny standard deviations, restricting the utility of estimates of progeny standard deviations to a relatively small parameter space.     

Rapid calculation of the solution scattering profile from a macromolecule of known structure

If one expands the structure factor equation in spherical coordinates, rotational averaging of the molecular Fourier transform, which leads directly to the solution scattering profile, is greatly simplified. It becomes a projection in the polar and azimuthal angular variables. The profile is given by I(R) = 1/2 infinity sigma n = 0 n sigma m = 0 epsilon mNm,n magnitude of Gm,n(R) 2 where Gm,n(R) = sigma jfjYm,n(theta j, phi j)jn(2 pi rjR) The index j runs over all atoms; r, theta, phi are atomic coordinates and epsilon and N are constants; the Ym,n are complex spherical harmonics, and jn are spherical Bessel functions; R = 2 sin theta/lambda. The effects of solvent have been modeled by subtracting from each protein atom a properly weighted water. Hydrogens have been included by using scattering curves fj derived from the spherical averaging of protein atoms with their attached hydrogens. This approach may also be satisfactory for neutron scattering. Published scattering profiles for lysozyme and BPTI have been accurately matched in less than one-tenth the time required by other methods. Separate, adjustable temperature factors for the protein, solvent waters, and bound waters are used, and appear to be needed. In the case of BPTI, as suggested by NMR observations, the observed diffraction pattern was much better accounted for by including only 4 tightly bound waters rather than the roughly 60 seen by crystallography.     

A model for quantitative trait loci mapping,linkage phase,and segregation pattern estimation for a full-sib progeny

Quantitative trait loci (QTL) mapping is an important approach for the study of the genetic architecture of quantitative traits. For perennial species, inbred lines cannot be obtained due to inbreed depression and a long juvenile period. Instead, linkage mapping can be performed by using a full-sib progeny. This creates a complex scenario because both markers and QTL alleles can have different segregation patterns as well as different linkage phases between them. We present a two-step method for QTL mapping using full-sib progeny based on composite interval mapping (i.e., interval mapping with cofactors), considering an integrated genetic map with markers with different segregation patterns and conditional probabilities obtained by a multipoint approach. The model is based on three orthogonal contrasts to estimate the additive effect (one in each parent) and dominance effect. These estimatives are obtained using the EM algorithm. In the first step, the genome is scanned to detect QTL. After, segregation pattern and linkage phases between QTL and markers are estimated. A simulated example is presented to validate the methodology. In general, the new model is more effective than existing approaches, because it can reveal QTL present in a full-sib progeny that segregates in any pattern present and can also identify dominance effects. Also, the inclusion of cofactors provided more statistical power for QTL mapping.     

Nuclear Overhauser effect and cross-relaxation rate determinations of dihedral and transannular interproton distances in the decapeptide tyrocidine A.

The following interproton distances are reported for the decapeptide tyrocidine A in solution: (a) r(phi) distances between NH(i) and H alpha (i), (b) r(psi) distances between NH (i + 1) and H alpha (i), (c) r(phi psi) distances between NH(i + 1) and NH(i), (d) NH in equilibrium NH transannular distances, (e) H alpha in equilibrium H alpha transannular distances, (f) r x 1 distances between H alpha and H beta protons, (g) NH(i) in equilibrium H beta (i) distances, (h) NH (i + 1) in equilibrium H beta (i) distances, (i) carboxamide-backbone protons and carboxamide-side chain proton distances, (j) side chain proton-side chain proton distances. The procedures for distance calculations were: NOE ratios and calibration distances, sigma ratios and calibration distances, and correlation times and sigma parameters. The cross-relaxation parameters were obtained from the product, say, of NOE 1 leads to 2 and the monoselective relaxation rate of proton 2; the NOEs were measured by NOE difference spectroscopy. The data are consistent with a type I beta-turn/ type II' beta-turn/ approximately antiparallel beta-pleated sheet conformation of tyrocidine A in solution and the NOEs, cross-relaxation parameters, and interproton distances serve as distinguishing criteria for beta-turn and beta-pleated sheet conformations. It should be borne in mind that measurement of only r phi and r psi distances for a decapeptide only defines the ( phi, psi)-space in terms of 4(10) possible conformations; the distances b-j served to reduce the degeneracy in possible (phi, psi)-space to one tyrocidine A conformation. The latter conformation is consistent with that derived from scalar coupling constants, hydrogen bonding studies, and proton-chromophore distance measurement, and closely resembles the conformation of gramicidin S.     

Fine mapping of a murine growth locus to a 1.4-cM region and resolution of linked QTL

Previous work identified a QTL affecting murine size (particularly tail length) in a cross between C57BL/6J and DBA/2J mice and refined its location to an 8-cM region between D1Mit30 and D1Mit57. The present study used recombinant progeny testing to fine map this QTL. Individuals from a partially congenic strain carrying chromosomes recombinant between D1Mit30 and D1Mit57 were mated to DBA/2J, generating 942 progeny. Two QTL affecting 10-week tail length were identified in this population: one at 9.7 cM distal to D1Mit30 (the position estimated in previous work), and another of smaller effect near D1Mit30. A second population (n=787) was generated by mating siblings from the progeny test population that were heterozygous for the same segment of chromosome, including only recombinants between D1Mit265 and D1Mit57. In the latter population, two QTL were also identified: one at 10.2 cM distal to D1Mit30, and another of smaller effect at the distal end of the mapped region (at D1Mit150). When the two populations were analyzed together, the estimated location of the central QTL was 10.2 cM distal to D1Mit30 and there was marginally significant evidence of the distal QTL. The central QTL explained approximately 7% of the phenotypic variance, and the 95% confidence interval for its position (determined by bootstrapping) was a 1.4-cM region, approximately the region from D1Mit451 to D1Mit219. The central QTL also affected tail length and body mass at 3 and 6 weeks of age, but to a lesser degree than 10-week tail length.     

Fruit size QTL identification and the prediction of parental QTL genotypes and breeding values in multiple pedigreed populations of sweet cherry

Large fruit size is a critical trait for any new sweet cherry (Prunus avium L.) cultivar, as it is directly related to grower profitability. Therefore, determining the genetic control of fruit size in relevant breeding germplasm is a high priority. The objectives of this study were (1) to determine the number and positions of quantitative trait loci (QTL) for sweet cherry fruit size utilizing data simultaneously from multiple families and their pedigreed ancestors, and (2) to estimate fruit size QTL genotype probabilities and genomic breeding values for the plant materials. The sweet cherry material used was a five-generation pedigree consisting of 23 founders and parents and 424 progeny individuals from four full-sib families, which were phenotyped for fruit size and genotyped with 78 RosCOS single nucleotide polymorphism and 86 simple sequence repeat markers. These data were analyzed by a Bayesian approach implemented in FlexQTL? software. Six QTL were identified: three on linkage group (G) 2 with one each on groups 1, 3, and 6. Of these QTL, the second G2 QTL and the G6 QTL were previously discovered while other QTL were novel. The predicted QTL genotypes show that some QTL were segregating in all families while other QTL were segregating in a subset of the families. The progeny varied for breeding value, with some progeny having higher breeding values than their parents. The results illustrate the use of multiple pedigree-linked families for integrated QTL mapping in an outbred crop to discover novel QTL and predict QTL genotypes and breeding values.     

QTL mapping for reaction to Phaeosphaeria leaf spot in a tropical maize population

Phaeosphaeria leaf spot (PLS) is an important disease in tropical and subtropical maize (Zea mays, L.) growing areas, but there is limited information on its inheritance. Thus, this research was conducted to study the inheritance of the PLS disease in tropical maize by using QTL mapping and to assess the feasibility of using marker-assisted selection aimed to develop genotypes resistance to this disease. Highly susceptible L14-04B and highly resistant L08-05F inbred lines were crossed to develop an F₂ population. Two-hundred and fifty six F₂ plants were genotyped with 143 microsatellite markers and their F_2:3 progenies were evaluated at seven environments. Ten plants per plot were evaluated 30 days after silk emergence following a rating scale, and the plot means were used for analyses. The heritability coefficient on a progeny mean basis was high (91.37%), and six QTL were mapped, with one QTL on chromosomes 1, 3, 4, and 6, and two QTL on chromosome 8. The gene action of the QTL ranged from additive to partial dominance, and the average level of dominance was partial dominance; also a dominance × dominance epistatic effect was detected between the QTL mapped on chromosome 8. The phenotypic variance explained by each QTL ranged from 2.91 to 11.86%, and the joint QTL effects explained 41.62% of the phenotypic variance. The alleles conditioning resistance to PLS disease of all mapped QTL were in the resistant parental inbred L08-05F. Thus, these alleles could be transferred to other elite maize inbreds by marker-assisted backcross selection to develop hybrids resistant to PLS disease.