Controlled Release Matrix Tablets of Zidovudine: Effect of Formulation Variables on the <Emphasis Type="BoldItalic">In Vitro</Emphasis> Drug Release Kinetics

The purpose of this research was to design oral controlled release (CR) matrix tablets of zidovudine (AZT) using hydroxypropyl methylcellulose (HPMC), ethyl cellulose (EC) and carbopol-971P (CP) and to study the effect of various formulation factors on in vitro drug release. Release studies were carried out using USP type 1 apparatus in 900 ml of dissolution media. Release kinetics were analyzed using zero-order, Higuchi’s square root and Ritger–Peppas’ empirical equations. Release rate decreased with increase in polymer proportion and compression force. The release rate was lesser in formulations prepared using CP (20%) as compared to HPMC (20%) as compared to EC (20%). No significant difference was observed in the effect of pH of dissolution media on drug release from formulations prepared using HPMC or EC, but significant difference was observed in CP based formulations. Decrease in agitation speed from 100 to 50 rpm decreased release rate from HPMC and CP formulations but no significant difference was observed in EC formulations. Mechanism of release was found to be dependent predominantly on diffusion of drug through the matrix than polymer relaxation incase of HPMC and EC formulations, while polymer relaxation had a dominating influence on drug release than diffusion incase of CP formulations. Designed CR tablets with pH independent drug release characteristics and an initial release of 17–25% in first hour and extending the release up to 16–20 h, can overcome the disadvantages associated with conventional tablets of AZT.     

Controlled Release Hydrophilic Matrix Tablet Formulations of Isoniazid: Design and In Vitro Studies

The aim of the present investigation was to develop oral controlled release matrix tablet formulations of isoniazid using hydroxypropyl methylcellulose (HPMC) as a hydrophilic release retardant polymer and to study the influence of various formulation factors like proportion of the polymer, polymer viscosity grade, compression force, and release media on the in vitro release characteristics of the drug. The formulations were developed using wet granulation technology. The in vitro release studies were performed using US Pharmacopoeia type 1 apparatus (basket method) in 900 ml of pH 7.4 phosphate buffer at 100 rpm. The release kinetics was analyzed using Korsmeyer–Peppas model. The release profiles were also analyzed using statistical method (one-way analysis of variance) and f ₂ metric values. The release profiles found to follow Higuchi’s square root kinetics model irrespective of the polymer ratio and the viscosity grade used. The results in the present investigation confirm that the release rate of the drug from the HPMC matrices is highly influenced by the drug/HPMC ratio and viscosity grade of the HPMC. Also, the effect of compression force and release media was found to be significant on the release profiles of isoniazid from HPMC matrix tablets. The release mechanism was found to be anomalous non-Fickian diffusion in all the cases. In the present investigation, a series of controlled release formulations of isoniazid were developed with different release rates and duration so that these formulations could further be assessed from the in vivo bioavailability studies. The formulations were found to be stable and reproducible.     

Development and Evaluation of Buccoadhesive Controlled Release Tablets of Lercanidipine

The purpose of this research was to develop and evaluate buccal mucoadhesive controlled release tablets of lercanidipine hydrochloride using polyethylene oxide and different viscosity grades of hydroxypropyl methylcellulose individually and in combination. Effect of polymer type, proportion and combination was studied on the drug release rate, release mechanism and mucoadhesive strength of the prepared formulations. Buccal mucoadhesive tablets were made by direct compression and were characterized for content uniformity, weight variation, friability, surface pH, thickness and mechanism of release. In order to estimate the relative enhancement in bioavailability one optimized formulation was evaluated in rabbits. Further, placebo tablets were also evaluated for acceptability in human subjects. Results indicated acceptable physical characteristics of designed tablets with good content uniformity and minimum weight variation. Drug release and mucoadhesive strength were found to depend upon polymer type, proportion and viscosity. The formulations prepared using poly ethylene oxide gave maximum mucoadhesion. The release mechanism of most formulations was found to be of anomalous non-Fickian type. In vivo studies of selected formulation in rabbits demonstrated significant enhancement in bioavailability of lercanidipine hydrochloride relative to orally administered drug. Moreover, in human acceptability studies of placebo formulations, the designed tablets adhered well to the buccal mucosa for more than 4 h without causing any discomfort. It may be concluded that the designed buccoadhesive controlled release tablets have the potential to overcome the disadvantage of poor and erratic oral bioavailability associated with the presently marketed formulations of lercanidipine hydrochloride.     

Determining the Polymer Threshold Amount for Achieving Robust Drug Release from HPMC and HPC Matrix Tablets Containing a High-Dose BCS Class I Model Drug: In Vitro and In Vivo Studies

It is challenging to achieve mechanically robust drug-release profiles from hydrophilic matrices containing a high dose of a drug with good solubility. However, a mechanically robust drug release over prolonged period of time can be achieved, especially if the viscosity and amount of the polymer is sufficiently high, above the “threshold values.” The goal of this research was to determine the hydroxypropyl cellulose (HPC) and hydroxypropyl methylcellulose (HPMC) polymer threshold amount that would enable robust drug release from matrix tablets containing a high dose of levetiracetam as a class I model drug according to the Biopharmaceutical Classification System (BCS). For this purpose, formulations containing HPC or HPMC of similar viscosity range, but in different amounts, were prepared. Based on the dissolution results, two final formulations were selected for additional in vitro and in vivo evaluation to confirm the robustness and to show bioequivalence. Tablets were exposed to various stress conditions in vitro with the use of different mechanically stress-inducing dissolution methods. The in vitro results were compared with in vivo results obtained from fasted and fed bioequivalence studies. Under both conditions, the formulations were bioequivalent and food had a negligible influence on the pharmacokinetic parameters C_max and area under the curve (AUC). It was concluded that the drug release from both selected formulations is mechanically robust and that HPC and HPMC polymers with intrinsic viscosities above 9 dL/g and in quantities above 30% enable good mechanical resistance, which ensures bioequivalence. In addition, HPC matrices were found to be more mechanically robust compared to HPMC.KEY WORDS: HPC, HPMC, matrix tablets, mechanically robust dissolution, threshold amount     

Comparative in vitro and in vivo evaluation of matrix,osmotic matrix,and osmotic pump tablets for controlled delivery of diclofenac sodium

The aim of this investigation was preparation and comparative evaluation of fabricated matrix (FM), osmotic matrix (OM), and osmotic pump (OP) tablets for controlled delivery of diclofenac sodium (DS). All formulations were evaluated for various physical parameters, and in vitro studies were performed on USP 24 dissolution apparatus II in pH 7.4 buffer and distilled water. In vivo studies were performed in 6 healthy human volunteers; the drug was assayed in plasma using HPLC, and results were compared with the performance of 2 commercial tablets of DS. Various pharmacokinetic parameters (ie, C_max, T_max, area under the curve [AUC_0–24], and mean residence time) and relative bioavailability were compared. All fabricated formulations showed more prolonged and controlled DS release compared with commercial tablets studied. The OM and OP tablets, however, performed better than the matrix tablets. The rate and extent of drug release from FM1 matrix tablets (single polymer) was significantly different from that of FM2 (admixed polymers). Type of porosigenic agents and osmogens also influenced the drug release. Analysis of in vitro data by regression coefficient analysis revealed zero-order release kinetics for OM and OP tablets, while FM tablets exhibited Higuchi kinetics. In vivo results indicated prolonged blood levels with delayed peak and improved bioavailability for fabricated tablets compared to commercial tablets. It was concluded that the osmotic matrix and osmotic pump tablets could provide more prolonged, controlled, and gastrointestinal environmental-independent DS release that may result in an improved therapeutic efficacy and patient compliance.     

A Design and Evaluation of Layered Matrix Tablet Formulations of Metoprolol Tartrate

The aim of this paper was to evaluate the performance of different swellable polymers in the form of layered matrix tablets to provide controlled therapeutic effect of metoprolol tartrate for twice daily administration. Seven different swellable polymers (carrageenan, hydroxypropylmethyl cellulose, pectin, guar gum, xanthan gum, chitosan, and ethyl cellulose) were evaluated alone or in combination as release-retardant layer. Tablets were tested for weight variation, hardness, diameter/thickness ratio, friability, and drug content uniformity and subjected to in vitro drug-release studies. In addition, the target-release profile of metoprolol tartrate was plotted using its clinical pharmacokinetic data, and the release profiles of the tablets were evaluated in relation to the plotted target release profile. Carrageenan was determined as the best polymer in two-layered matrix tablet formulations due to its better accordance to the target release profile and was selected for preparing three-layered matrix tablets. Carrageenan formulations exhibited super case II release mechanism. Accelerated stability testing was performed on two- and three-layered matrix tablet formulations of carrageenan. The tablets were stored at 25°C/60% relative humidity and 40°C/75% relative humidity for 6 months and examined for physical appearance, drug content, and release characteristics. At the end of the storage time, formulations showed no change either in physical appearance, drug content, or drug-release profile. These results demonstrated the suitability of three-layered tablet formulation of carrageenan to provide controlled release and improved linearity for metoprolol tartrate in comparison to two-layered tablet formulation.     

Application of Ethylcellulose Coating to Hydrophilic Matrices: A Strategy to Modulate Drug Release Profile and Reduce Drug Release Variability

Hydrophilic matrix tablets are commonly used for extended release dosage forms. For low aqueous-solubility drugs, there may be challenges in modulation of release profiles and achieving consistent release in physiological conditions. To evaluate potential formulation strategies, matrix tablets of a low-soluble drug, hydrochlorothiazide, were developed using hypromellose and two fillers of different solubility, lactose (soluble) or partially pregelatinized maize starch (partially soluble). Additionally, application of an insoluble barrier membrane, aqueous ethylcellulose coating system, and a hydrophilic pore former onto matrix tablets was evaluated. Drug release from uncoated matrix tablets was variable at different agitation rates. Evaluation of tablets in bio-relevant media using physiologically relevant residence time indicated variable and higher initial release rate for uncoated matrices containing lactose but more robust behavior for tablets containing partially pregelatinized starch. Such in vitro behavior may lead to erratic drug release in vivo, when comparing fed versus fasted conditions. Dissolution profiles from barrier membrane-coated tablets showed initial delay, followed by zero-order release kinetics, with reduction or elimination of variability compared to uncoated matrices. Such reduced variability may mitigate mechanical effects of post-prandial stomach. Effects of coating weight gain and inclusion levels of pore former were evaluated and found to be critical in achieving robust and stable release profiles.     

An Epichlorohydrin-Crosslinked Semi-Interpenetrating GG-PEO Network as a Xerogel Matrix for Sustained Release of Sulpiride

The current study involved the development of a novel sustained release crosslinked semi-IPN xerogel matrix tablet prepared by chemical crosslinking of poly(ethylene) oxide (PEO) and gellan gum (GG) employing epichlorohydrin (EPI) as crosslinker. A Box–Behnken design was employed for the statistical optimization of the matrix system to ascertain the ideal combination of native polymeric and crosslinking agents. Characterization studies were performed by employing standard polymer characterization techniques such as Fourier transform infrared spectrometry, differential scanning calorimetry, and scanning electron microscopy. Formulated matrix tablets displayed zero-order release kinetics, extending over 24 h. The mechanism of drug release was primarily by swelling and surface erosion. Crosslinked semi-IPN xerogel matrix tablets were compared to non-crosslinked polymer blends; results from the study conducted showed that the physiochemical properties of the PEO and GG were sufficiently modified to allow for sustained release of sulpiride with a 100% drug release at 24 h in a controlled manner as compared to non-crosslinked formulations which displayed further release beyond the test period. Crosslinked formulations displayed water uptake between 450 and 500% indicating a controlled rate of swelling and erosion allowing for sustained release. Surface morphology of the crosslinked system depicted a porous structure formed by interpenetrating networks of polymers, allowing for a greater degree of controlled penetration into the system affording it the ability to sustain drug release. Therefore, conclusively, based on the study performed, crosslinked PEO-GG allows for the sustained release of sulpiride from a hydrophilic semi-IPN xerogel matrix system.KEY WORDS: epichlorohydrin, matrix tablet, semi-interpenetrating polymer network, sustained release, sulpiride     

Novel Self-Nanoemulsifying Drug Delivery Systems (SNEDDS) for Oral Delivery of Cinnarizine: Design, Optimization, and In-Vitro Assessment

Due to its extreme lipophilicity, the oral delivery of cinnarizine (CN) encounters several problems such as poor aqueous solubility and pH-dependent dissolution, which result in low and erratic bioavailability. The current study aims to design self-nanoemulsifying drug delivery systems (SNEDDS) of CN that circumvent such obstacles. Equilibrium solubility of CN was determined in a range of anhydrous and diluted lipid-based formulations. Dynamic dispersion tests were carried out to investigate the efficiency of drug release and magnitude of precipitation that could occur upon aqueous dilution. Droplet sizes of selected formulations, upon (1:1,000) aqueous dilution, were presented. The optimal formulations were enrolled in subsequent dissolution studies. The results showed that increasing lipid chain length and surfactant lipophilicity raised the formulation solvent capacity, while adding co-solvents provoked a negative influence. The inclusion of mixed glycerides and/or hydrophilic surfactants improved the drug release efficiency. Generally, no significant precipitation was observed upon aqueous dilution of the formulations. Five formulations were optimal in terms of their superior self-emulsifying efficiency, drug solubility, dispersion characteristics, and lower droplet size. Furthermore, the optimal formulations showed superior dissolution profile compared to the marketed (Stugeron®) tablet. Most importantly, they could resist the intensive precipitation observed with the marketed tablet upon shifting from acidic to alkaline media. However, SNEDDS containing medium-chain mixed glycerides showed the highest drug release rate and provide great potential to enhance the oral CN delivery. Accordingly, the lipid portion seems to be the most vital component in designing CN self-nanoemulsifying systems.     

Design and study of lamivudine oral controlled release tablets

The objective of this study was to design oral controlled release matrix tablets of lamivudine using hydroxypropyl methylcellulose (HPMC) as the retardant polymer and to study the effect of various formulation factors such as polymer proportion, polymer viscosity, and compression force on the in vitro release of drug. In vitro release studies were performed using US Pharmacopeia type 1 apparatus (basket method) in 900 mL of pH 6.8 phosphate buffer at 100 rpm. The release kinetics were analyzed using the zero-order model equation, Higuchi's square-root equation, and the Ritger-Peppas empirical equation. Compatibility of the drug with various excipients was studied. In vitro release studies revealed that the release rate decreased with increase in polymer proportion and viscosity grade. Increase in compression force was found to decrease the rate of drug release. Matrix tablets containing 60% HPMC 4000 cps were found to show good initial release (26% in first hour) and extended the release up to 16 hours. Matrix tablets containing 80% HPMC 4000 cps and 60% HPMC 15,000 cps showed a first-hour release of 22% but extended the release up to 20 hours. Mathematical analysis of the release kinetics indicated that the nature of drug release from the matrix tablets was dependent on drug diffusion and polymer relaxation and therefore followed non-Fickian or anomalous release. No incompatibility was observed between the drug and excipients used in the formulation of matrix tablets. The developed controlled release matrix tablets of lamivudine, with good initial release (20%-25% in first hour) and extension of release up to 16 to 20 hours, can overcome the disadvantages of conventional tablets of lamivudine.     

Preparation and characterization of propylthiouracil niosomes

Propylthiouracil, a lyophobic drug with an antiproliferative activity, was formulated into niosomes using various classes of nonionic surfactants. Feasibility of vesicle formation by the sonication method was evaluated. Size and size distribution was measured by laser diffraction. Entrapment and drug release over 24 h were monitored by UV spectrophotometric method at 275 nm. The results revealed that niosomes readily formed from various compositions of nonionic surfactant and cholesterol, with or without a stabilizer. Entrapment of PTU in niosomes depended on bilayer composition. The release of PTU from all niosomal formulations studied was retarded and followed the first-order kinetics. Degree of slow release had a negative correlation with drug entrapment. The release rate also depended on the physical state of the bilayer. The results of this study indicate that PTU niosomes were able to control the release of PTU and might be of value to develop further into topical formulations.     

Preparation and Characterization of Propylthiouracil Niosomes

Propylthiouracil, a lyophobic drug with an antiproliferative activity, was formulated into niosomes using various classes of nonionic surfactants. Feasibility of vesicle formation by the sonication method was evaluated. Size and size distribution was measured by laser diffraction. Entrapment and drug release over 24 h were monitored by UV spectrophotometric method at 275 nm. The results revealed that niosomes readily formed from various compositions of nonionic surfactant and cholesterol, with or without a stabilizer. Entrapment of PTU in niosomes depended on bilayer composition. The release of PTU from all niosomal formulations studied was retarded and followed the first-order kinetics. Degree of slow release had a negative correlation with drug entrapment. The release rate also depended on the physical state of the bilayer. The results of this study indicate that PTU niosomes were able to control the release of PTU and might be of value to develop further into topical formulations.     

Matrix Tablets: The Effect of Hydroxypropyl Methylcellulose/Anhydrous Dibasic Calcium Phosphate Ratio on the Release Rate of a Water-Soluble Drug Through the Gastrointestinal Tract I. In Vitro Tests

Different hydroxypropyl methylcellulose (HPMC)/anhydrous dibasic calcium phosphate (ADCP) matrix tablets have been developed aiming to evaluate the influence of both components ratio in the control release of a water-soluble drug (theophylline). In order to characterise the matrix tablets, swelling, buoyancy and dissolution studies have been carried out in different aqueous media (demineralised water, progressive pH medium, simulated gastric fluid, simulated intestinal fluid and simulated colonic fluid). The HPMC/ADCP ratio has turned out to be the determinant in the matrix behaviour: the HPMC characteristic swelling behaviour was modulated, in some cases, by the ADCP characteristic acidic dissolution. When the HPMC/ADCP ratio was ≥0.69, buoyancy, continuous swelling and low theophylline dissolution rate from the matrices (H1, H2 and H3) were observed in all dissolution media. Consequently, these formulations could be adequate as gastro-retentive drug delivery systems. Additionally, HPMC/ADCP ratio ≤0.11 (H5 and H6) induces a pH-dependent drug release which could be applied to design control drug release enteric formulations (with a suitable enteric coating). Finally, a HPMC/ADCP ratio between 0.11 and 0.69 (H4) yield a gastrointestinal controlled drug release, due to its time-dependent buoyancy (7 h) and a total drug delivery in 17 h in simulated colonic fluid.Key words: anhydrous dibasic calcium phosphate, hydroxypropyl methylcellulose, matrix tablets, oral controlled release, theophylline     

Niosome-Encapsulated Gentamicin for Ophthalmic Controlled Delivery

The objective of the present research was to investigate the feasibility of using non-ionic surfactant vesicles (niosomes) as carriers for the ophthalmic controlled delivery of a water soluble local antibiotic; gentamicin sulphate. Niosomal formulations were prepared using various surfactants (Tween 60, Tween 80 or Brij 35), in the presence of cholesterol and a negative charge inducer dicetyl phosphate (DCP) in different molar ratios and by employing a thin film hydration technique. The ability of these vesicles to entrap the studied drug was evaluated by determining the entrapment efficiency %EE after centrifugation and separation of the formed vesicles. Photomicroscopy and transmission electron microscopy as well as particle size analysis were used to study the formation, morphology and size of the drug loaded niosomes. Results showed a substantial change in the release rate and an alteration in the %EE of gentamicin sulphate from niosomal formulations upon varying type of surfactant, cholesterol content and presence or absence of DCP. In-vitro drug release results confirmed that niosomal formulations have exhibited a high retention of gentamicin sulphate inside the vesicles such that their in vitro release was slower compared to the drug solution. A preparation with 1:1:0.1 molar ratio of Tween 60, cholesterol and DCP gave the most advantageous entrapment (92.02% ± 1.43) and release results (Q_8h = 66.29% ± 1.33) as compared to other compositions. Ocular irritancy test performed on albino rabbits, showed no sign of irritation for all tested niosomal formulations.     

Silicone Adhesive Matrix of Verapamil Hydrochloride to Provide pH-Independent Sustained Release

Providing pH-independent oral release of weakly basic drugs with conventional matrix tablets can be challenging because of the pH-dependent solubility characteristics of the drugs and the changing pH environment along the gastrointestinal tract. The aim of the present study was to use a hydrophobic polymer to overcome the issue of pH-dependent release of weakly basic model drug verapamil hydrochloride from matrix tablets without the use of organic buffers in the matrix formulations. Silicone pressure-sensitive adhesive (PSA) polymer was evaluated because of its unique properties of low surface energy, hydrophobicity, low glass transition temperature, high electrical resistance, and barrier to hydrogen ion diffusion. Drug release, hydrogen ion diffusion, tablet contact angle, and internal tablet microenvironment pH with matrix tablets prepared using PSA were compared with those using water-insoluble ethyl cellulose (EC). Silicone PSA films showed higher resistance to hydrogen ion diffusion compared with EC films. Verapamil hydrochloride tablets prepared using silicone PSA showed higher hydrophobicity and lower water uptake than EC tablets. Silicone PSA tablets also showed pH-independent release of verapamil and decreased in dimensions during drug dissolution. By contrast, verapamil hydrochloride tablets prepared using EC did not achieve pH-independent release.     

Formulation Study and Evaluation of Matrix and Three-layer Tablet Sustained Drug Delivery Systems Based on Carbopols with Isosorbite Mononitrate

The purpose of this research was to develop and evaluate different preparations of sustained delivery systems, using Carbopols as carriers, in the form of matrices and three-layer tablets with isosorbite mononitrate. Matrix tablets were prepared by direct compression whereas three-layer tablets were prepared by compressing polymer barrier layers on both sides of the core containing the drug. The findings of the study indicated that all systems demonstrated sustained release. The properties of the polymer used and the structure of each formulation appear to considerably affect drug release and its release rate. The three-layer formulations exhibit lower drug release compared to the matrices. This was due to the fact that the barrier-layers hindered the penetration of liquid into the core and modified drug dissolution and release. The geometrical characteristics/structure of the tablets as well as the weight/thickness of the barriers-layers considerably influence the rate of drug release and the release mechanisms. Kinetic analysis of the data indicated that drug release from matrices was mainly attributed to Fickian diffusion while three-layer tablets exhibited either anomalous diffusion or erosion/relaxation mechanisms. The advantage of Carbopol formulations is that a range of release profiles can easily be obtained through variations in tablet structure and thus Carbopols are appropriate carriers of oral sustained drug delivery systems for soluble drugs such as the isosorbite mononitrate.     

Sugar End-Capped Poly-d,l-lactides as Excipients in Oral Sustained Release Tablets

Sugar end-capped poly-d,l-lactide (SPDLA) polymers were investigated as a potential release controlling excipient in oral sustained release matrix tablets. The SPDLA polymers were obtained by a catalytic ring-opening polymerization technique using methyl α-d-gluco-pyranoside as a multifunctional initiator in the polymerization. Polymers of different molecular weights were synthesized by varying molar ratios of monomer/catalyst. The matrix tablets were prepared by direct compression technique from the binary mixtures of SPDLA and microcrystalline cellulose, and theophylline was used as a model drug. The tablet matrices showed in vitro reproducible drug release profiles with a zero-order or diffusion-based kinetic depending on the SPDLA polymer grade used. Further release from the tablet matrices was dependent on the molecular weight of the SPDLA polymer applied. The drug release was the fastest with the lowest molecular weight SPDLA grade, and the drug release followed zero-order rate. With the higher molecular weight SPDLAs, more prolonged dissolution profiles for the matrix tablets (up to 8–10 h) were obtained. Furthermore, the prolonged drug release was independent of the pH of the dissolution media. In conclusion, SPDLAs are a novel type of drug carrier polymers applicable in oral controlled drug delivery systems.     

Evaluation of Tadalafil Nanosuspensions and Their PEG Solid Dispersion Matrices for Enhancing Its Dissolution Properties

The aim of this work was to prepare and evaluate Tadalafil nanosuspensions and their PEG 4000 solid dispersion matrices to enhance its dissolution rate. Nanosuspensions were prepared by precipitation/ultrasonication technique at 5°C where different stabilizers were screened for stabilization. Nanosuspensions were characterized in terms of particle size and charge. Screening process limited suitable stabilizers into structurally related surfactants composed of a mixture of Tween80 and Span80 at 1:1 ratio (in percent, weight/volume) in adjusted alkaline pH (named TDTSp-OH). The surfactant mixture aided the production of nanosuspensions with an average particle size of 193 ± 8 nm and with short-term stability sufficient for further processing. Solid dispersion matrices made of dried Tadalafil nanosuspensions or dried Tadalafil raw powder suspensions and PEG 4000 as a carrier were prepared by direct compression. Drying was performed via dry heat or via freeze dry. Drug release studies showed that, in general, tablet formulations made of freeze-dried product exhibited faster initial release rates than the corresponding tablets made of oven-dried products which could be attributed to possible larger crystal growth and larger crushing strengths of oven-dried formulations. At best, 60% of drug was released from solid dispersion matrices, while more than 90% of drug was released from TDTSp-OH nanosuspension within the first 5 min. In conclusion, Tadalafil nanosuspensions obtained using a mixed surfactant system provided rapid dissolution rates of Tadalafil that can theoretically enhance its bioavailability.KEY WORDS: nanosuspension, particle size, solid dispersion, stabilizer, tablets, Tadalafil     

Gel formulation containing mixed surfactant and lipids associating with carboplatin

The interaction of amphiphilic molecules such as lipids and surfactants with the hydrophilic drug carboplatin was investigated to identify suitable self-assembling components for a potential gel-based delivery formulation. (1) H-NMR Studies in sodium bis(2-ethylhexyl) sulfosuccinate (aerosol-OT, AOT)-based reverse micelles show that carboplatin associates and at least partially penetrates the surfactant interface. Langmuir monolayers formed by dipalmitoyl(phosphatidyl)choline are penetrated by carboplatin. Carboplatin was found to also penetrate the more rigid monolayers containing cholesterol. A combined mixed surfactant gel formulation containing carboplatin and cholesterol for lymphatic tissue targeting was investigated for the intracavitary treatment of cancer. This formulation consists of a blend of the surfactants lecithin and AOT (1 : 3 ratio), an oil phase of isopropyl myristate, and an aqueous component. The phases of the system were defined within a pseudo-ternary phase diagram. At low oil content, this formulation produces a gel-like system over a wide range of H(2) O content. The carboplatin release from the formulation displays a prolonged discharge with a rate three to five times slower than that of the control. Rheological properties of the formulation exhibit pseudoplastic behavior. Microemulsion and Langmuir monolayer studies support the interactions between carboplatin and amphiphilic components used in this formulation. To target delivery of carboplatin, two formulations containing cholesterol were characterized. These two formulations with cholesterol showed that, although cholesterol does little to alter the phases in the pseudo-ternary system or to increase the initial release of the drug, it contributes significantly to the structure of the formulation under physiological temperature, as well as increases the rate of steady-state discharge of carboplatin.     

Interpenetrating polymer network (IPN) hydrogel microspheres for oral controlled release application

Interpenetrating polymer network (IPN) hydrogel microspheres of sodium carboxymethyl cellulose (NaCMC) and poly(vinyl alcohol) (PVA) were prepared by water-in-oil (w/o) emulsion crosslinking method for oral controlled release delivery of a non-steroidal anti-inflammatory drug, diclofenac sodium (DS). The microspheres were prepared with various ratios of NaCMC to PVA, % drug loading and extent of crosslinking density at a fixed polymer weight. The prepared microspheres with loose and rigid surfaces were evidenced by scanning electron microscope (SEM). Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis confirmed the IPN formation. Differential scanning calorimetry (DSC) study was performed to understand the dispersion nature of drug after encapsulation. The in vitro drug release study was extensively evaluated depending on the process variables in both acid and alkaline media. All the formulations exhibited satisfactory physicochemical and in vitro release characteristics. Release data indicated a non-Fickian trend of drug release from the formulations. Based on the results of this study suggest that DS loaded IPN microspheres were suitable for oral controlled release application.