A non-LTR retroelement extinction in Spermophilus tridecemlineatus

The typical mammalian genome is dominated by two types of transposable elements (TEs), the autonomous and non-autonomous non-LTR retrotransposons, i.e. LINEs and SINEs, and with few exceptions there is a sole active LINE family (L1). During an ongoing investigation of TEs in rodents we determined that overall transposon activity has been steadily declining in Spermophilus tridecemlineatus. More specifically, the typically ubiquitous L1 activity of mammals has decreased drastically within the last 26MY. Indeed, only three L1 insertions with intact ORF1 sequences were readily identifiable and no intact ORF2 sequences were identified. The last L1 and SINE insertions date to ~5.3MYA and 4MYA, respectively. Based on our inability to computationally identify recently inserted L1 elements we suggest that S. tridecemlineatus is experiencing a quiescence or extinction of non-LTR retrotransposon activity. Such a finding represents only the fourth instance of a loss of non-LTR retrotransposon activity identified in mammals and, as such, represents an important additional data point to guide our understanding of LINE dynamics in eutherians.     

Evolution of Tandemly Repeated Sequences: What Happens at the End of an Array?

Tandemly repeated sequences are a major component of the eukaryotic genome. Although the general characteristics of tandem repeats have been well documented, the processes involved in their origin and maintenance remain unknown. In this study, a region on the paternal sex ratio (PSR) chromosome was analyzed to investigate the mechanisms of tandem repeat evolution. The region contains a junction between a tandem array of PSR2 repeats and a copy of the retrotransposon NATE, with other dispersed repeats (putative mobile elements) on the other side of the element. Little similarity was detected between the sequence of PSR2 and the region of NATE flanking the array, indicating that the PSR2 repeat did not originate from the underlying NATE sequence. However, a short region of sequence similarity (11/15 bp) and an inverted region of sequence identity (8 bp) are present on either side of the junction. These short sequences may have facilitated nonhomologous recombination between NATE and PSR2, resulting in the formation of the junction. Adjacent to the junction, the three most terminal repeats in the PSR2 array exhibited a higher sequence divergence relative to internal repeats, which is consistent with a theoretical prediction of the unequal exchange model for tandem repeat evolution. Other NATE insertion sites were characterized which show proximity to both tandem repeats and complex DNAs containing additional dispersed repeats. An ``accretion model' is proposed to account for this association by the accumulation of mobile elements at the ends of tandem arrays and into ``islands' within arrays. Mobile elements inserting into arrays will tend to migrate into islands and to array ends, due to the turnover in the number of intervening repeats. Received: 18 August 1997 / Accepted: 18 September 1998     

Characterization of Repetitive DNA Elements in Arabidopsis

We have applied computational methods to the available database and identified several families of repetitive DNA elements in the Arabidopsis thaliana genome. While some of the elements have features expected of either miniature inverted-repeat transposable elements (MITEs) or retrotransposons, the most abundant class of repetitive elements, the AthE1 family, is structurally related to neither. The AthE1 family members are defined by conserved 5′ and 3′ sequences, but these terminal sequences do not represent either inverted or direct repeats. AthE1 family members with greater than 98% identity are easily identified on different Arabidopsis chromosomes. Similar to nonautonomous DNA-based transposon families, the AthE1 family contains members in which the conserved terminal domains flank unrelated sequences. The primary utility of characterizing repetitive sequences is in defining, at least in part, the evolutionary architecture of specific Arabidopsis loci. The repetitive elements described here make up approximately 1% of the available Arabidopsis thaliana genomic sequence. Received: 13 October 1998 / Accepted: 30 December 1998     

Extensive Amplification and Transposition of a Novel Repetitive Element, Xstir, Together with Its Terminal Inverted Repeat in the Evolution of Xenopus

A DNA fragment containing short tandem repeat sequences (approximately 86-bp repeat) was isolated from a Xenopus laevis cDNA library. Southern blot and in situ hybridization analyses revealed that the repeat was highly dispersed in the genome and was present at approximately 1 million copies per haploid genome. We named this element Xstir (Xenopus short tandemly and invertedly repeating element) after its arrangement in the genome. The majority of the genomic Xstir sequences were digested to monomer and dimer sizes with several restriction enzymes. Their sequences were found to be highly homogeneous and organized into tandem arrays in the genome. Alignment analyses of several known sequences showed that some of the Xstir-like sequences were also organized into interspersed inverted repeats. The inverted repeats consisted of an inverted pair of two differently modified Xstirs separated by a short insert. In addition, these were framed by another novel inverted repeat (Xstir-TIR). The Xstir-TIR sequence was also found at the ends of tandem Xstir arrays. Furthermore, we found that Xstir-TIR was linked to a motif characterizing the T2 family which belonged to a vertebrate MITE (miniature inverted-repeat transposable element) family, suggesting the importance of Xstir-TIR for their amplification and transposition. The present study of 11 anuran and 2 urodele species revealed that Xstir or Xstir-like sequences were extensively amplified in the three Xenopus species. Genomic Xstir populations of X. borealis and X. laevis were mutually indistinguishable but significantly different from that of X. tropicalis. Received: 5 April 2000 / Accepted: 3 August 2000     

Horizontal Escape of the Novel Tc1-Like Lepidopteran Transposon TCp3.2 into Cydia pomonella Granulovirus

We characterized an insertion mutant of the baculovirus Cydia pomonella granulovirus (CpGV), which contained a transposable element of 3.2 kb. This transposon, termed TCp3.2, has unusually long inverted terminal repeats (ITRs) of 756 bp and encodes a defective gene for a putative transposase. Amino acid sequence comparison of the defective transposase gene revealed a distant relationship to a putative transposon in Caenorhabditis elegans which also shares some similarity of the ITRs. Maximum parsimony analysis of the predicted amino acid sequences of Tc1- and mariner-like transposases available from the GenBank data base grouped TCp3.2 within the superfamily of Tc1-like transposons. DNA hybridization indicated that TCp3.2 originated from the genome of Cydia pomonella, which is the natural host of CpGV, and is present in less than 10 copies in the C. pomonella genome. The transposon TCp3.2 most likely was inserted into the viral genome during infection of host larvae. TCp3.2 and the recently characterized Tc1-like transposon TC14.7 (Jehle et al. 1995), which was also found in a CpGV mutant, represent a new family of transposons found in baculovirus genomes. The occasional horizontal escape of different types of host transposons into baculovirus genomes evokes the question about the possible role of baculoviruses as an interspecies vector in the horizontal transmission of insect transposons. Received: 27 February 1997 / Accepted: 16 May 1997     

Characterization of the Sol3 family of nonautonomous transposable elements in tomato and potato

Sol3 transposons are mobile elements defined by long terminal inverted repeats which are found in tomato and potato. Members of the Sol3 family have been isolated from a variety of solanaceous species including Solanum tuberosum (potato), S. demissum, S. chacoense, Lycopersicon esculentum (tomato), and L. hirsutum. While highly conserved elements are found within different species, Sol3 terminal inverted repeats can also flank unrelated sequences. Southern blot analysis indicates that Sol3 elements are less prevalent in the potato (approximately 50 copies) than in the tomato (>100 copies) genome. No Sol3-hybridizing sequences were observed in tobacco. While a number of Sol3 elements ranging in size from 500 bp to 2 kbp were sequenced, no transposase coding domains could be identified within the internal regions of the elements. The data suggest that the Sol3 represent a heterogeneous family of nonautonomous transposable elements associated with an as-yet-unidentified autonomous transposon. Received: 18 September 1996 / Accepted: 11 March 1997     

Phylogenetic Analysis of a Retroposon Family in African Great Apes

The SINE-R retroposon family has been identified by its relationship with the long terminal repeats (LTRs) of human endogenous retrovirus class K (HERV-K) as a mobile element that has evolved recently in the human genome. Here we examined the recent evolutionary history of this class of elements by a PCR approach to genomic DNA from the African great apes and by phylogenetic analysis including comparison with the HERV K10 parent sequence. With primers derived from a cDNA sequence from human brain, we identified 27 sequences from the chimpanzee and 16 from the gorilla. Phylogenetic comparisons with previously recognized sequences from the human and from the orangutan and gibbon revealed wide overlap of elements across species, suggesting multiple origins in the course of hominoid evolution. Two human elements SINE-R.C2 and HS307 were the furthest removed from the HERV-K10 sequence but these two elements were closely related to three elements from the chimpanzee and four elements from the gorilla. This group of elements (our clusters 14 and 15) appears to have transposed late in hominoid evolution. One element (Ch-M16) showed 99.1% sequence identity with the SINE-R.C2 element, which is human-specific. Thus the SINE-R family appears to have continued to be active in transposition throughout the course of primate evolution. Received: 12 March 1999 / Accepted: 25 May 1999     

Tsessebe, Topi and Tiang: three distinct Tc1‐like transposable elements in the malaria vector, Anopheles gambiae

Three distinct types of Tc1‐family transposable elements have been identified in the malaria vector, Anopheles gambiae. These three elements, named Tsessebe, Topi and Tiang, have the potential to encode transposases that retain most of the conserved amino acids that are characteristic of this transposon family. However, all three are diverged from each other by more than 50% at the nucleotide level. Full‐length genomic clones of two types, Topi and Tsessebe, have been isolated and fully sequenced. The third, Tiang, is represented only by a 270 bp, PCR‐amplified fragment of the transposase coding region. The Topi and Tsessebe elements are 1.4 kb and 2.0 kb in length, respectively, and differ in the length of their inverted terminal repeats (ITRs). The Topi elements have 26 bp ITRs, whereas the Tsessebe clones have long ITRs ranging in length from 105 to 209 bp, with the consensus being about 180 bp. This difference is due primarily to variation in the length of an internal stretch of GT repeats. The copy number and location of these elements in ovarian nurse cell polytene chromosomes varies greatly between element subtypes: Topi elements are found at between 17–31 sites, Tsessebe at 9–13 and at 20 euchromatic sites, in addition to several copies of these elements in heterochromatic DNA. The copy number and genomic insertion sites of these transposons varies between A.gambiae strains and between member species of the A.gambiae complex. This may be indicative of transpositionally active Tc1‐like elements within the genome. This revised version was published online in July 2006 with corrections to the Cover Date.     

Tnat1 and Tnat2 from Arabidopsis thaliana: novel transposable elements with tandem repeat sequences.

A computer-aided homology search of databases found that the nucleotide sequences flanking ATLN44, a non-LTR retrotransposon (LINE) from Arabidopsis thaliana, are repeated in the A. thaliana genome. These sequences are homologous to flanking sequences of 664 bp with terminal inverted repeat sequences of about 70 bp. The 664-bp sequence and most of the 14 homologues identified were flanked by direct repeat sequences of 9 bp. These findings indicate that the repeated sequence, named Tnat1, is a transposable element that duplicates a 9-bp sequence at the target site on transposition and that ATLN44 is inserted in one Tnat1 member. Interestingly, all of the Tnat1 members had tandem repeats comprised of several units of a 60-bp sequence, the number of repeats differing among Tnat1 members. Of the Tnat1 members identified, one was inserted into another sequence repeated in the A. thaliana genome: that sequence is about 770 bp long and has terminal inverted repeat sequences of about 110 bp. The sequence is flanked by direct repeats of a 9-bp sequence, indicating that it is another transposable element, named Tnat2, from A. thaliana. Moreover, Tnat2 members had a tandem repeat about 240 bp long. Tnat1 and Tnat2 with tandem repeats in their internal regions show no homology to each other or to any of the elements identified previously; therefore they appear to be novel transposable elements.