Attenuated total reflection infrared spectroscopy of white-rot decayed beech wood

Small blocks of beech wood were exposed to the white-rot fungus Trametes versicolor for a period of 84 days to investigate chemical alteration in decayed wood by infrared spectroscopy. Decayed samples were analyzed at 2 week intervals by using attenuated total teflection (ATR) infrared spectroscopy as a rapid method. Analyses showed that chemical alteration in wood began after the second week of exposure. The appearance of new peaks indicated chemical modification of cell walls between days 28 and 70 of exposure to the fungus, and the disappearance of the peaks at day 84 indicates removal of the cell wall constituents. This investigation showed that ATR spectroscopy is a very applicable and rapid method for studying wood biodegradation.     

Wood Plastic Composites Prepared from Biodegradable Poly(butylene succinate) and Burma Padauk Sawdust (Pterocarpus macrocarpus): Water Absorption Kinetics and Sunlight Exposure Investigations

Wood plastic biocomposites of biodegradable poly(butylene succinate) (PBS) and Padauk sawdust was successfully prepared by using a twin screw extruder and an injection molding machine.The effects of water absorption and sunlight exposure on some properties of the composites were investigated.Water absorption of PBS composites was found to follow the Fick's law of diffusion,while the diffusion coefficient increased with increasing wood content.Maximum water absorption of around 4.5％ was observed at 30 wt.％ sawdust.Optical micrograph indicated the swelling of wood particles by around 1％-3％ after 30 days of water immersion.The tensile and flexural strengths reduced slightly both under the water immersion and sunlight exposure.After 90 days of exposure,the composites clearly looked paler than the non-weathered ones.Thermal scan indicated the reduction of crystalline region due to the plasticization effect derived from water molecules.     

Enzymatic surface modification of cellulose acetate fibre by cutinase-CBM (carbohydrate-binding module) fusion proteins

Abstract

In this paper, two types of bacterial fusion protein, cutinase-CBM_Cel6A and cutinase-CBM_CenA, were used to modify the surface of cellulose acetate fibre. The enzyme binding on cellulose acetate fibres and the hydrolysis of acetyl groups were monitored. Water absorbency and dye uptake were measured to assess the extent of enzymatic modification. The results demonstrated that cutinase-carbohydrate-binding module (CBM) has a greater effect on cellulose acetate fibres than that of cutinase. The use of non-ionic surfactant Triton X-100 could further improve enzymatic modification of cellulose acetate fibres in terms of wettability and dyeability. Scanning electron microscopy confirmed that both cutinase-CBMs could lead to the formation of carving characters on the surface of treated cellulose acetate fibres. Our studies provide a foundation for the potential application of cutinase-CBM in the surface modification of cellulose acetate fibre.     

Structural change in wood by brown rot fungi and effect on enzymatic hydrolysis

The effects of biological pretreatment on Pinus radiata and Eucalyptus globulus, were evaluated after exposure to two brown rot fungi Gloephylum trabeum and Laetoporeus sulphureus. Changes in chemical composition, structural modification, and susceptibility to enzymatic hydrolysis in the degraded wood were analyzed. After eight weeks of biodegradation, the greatest loss of weight and hemicellulose were 13% and 31%, respectively, for P. radiata with G. trabeum. The content of glucan decreased slightly, being the highest loss of 20% for E. globulus with G. trabeum. Consistent with degradation mechanism of these fungi, lignin was essentially undegraded by both brown rot fungi. Both brown rot fungi cause a sharp reduction in the cellulose degree of polymerization (DP) in the range between 58% and 79%. G. trabeum depolymerized cellulose in both wood faster than L. sulphureus. Also, structural characteristic of crystalline cellulose were measured by using two different techniques - X-ray diffraction (XRD) and infrared spectroscopy (FT-IR). The biological pretreatments showed an effect on cellulose crystallinity structure, a decrease between 6% and 21% was obtained in the crystallinity index (CrI) calculated by IR, no changes were observed in the XRD. Material digestibility was evaluated by enzymatic hydrolysis, the conversion of cellulose to glucose increased with the biotreatment time. The highest enzymatic hydrolysis yields were obtained when saccharification was performed on wood biopretreated with G. trabeum (14% P. radiata and 13% E. globulus). Decreasing in DP and CrI, and hemicellulose removal result in an increase of enzymatic hydrolysis performance. Digestibility was better related to DP than with other properties. G. trabeum can be considered as a potential fungus for biological pretreatment, since it provides an effective process in breaking the wood structure, making it potentially useful in the development of combined pretreatments (biological-chemical). A viable alternative to pretreatment process that can be used is a bio-mimetic system, similar to low-molecular complexes generated by fungi such as G. trabeum combined pretreatments (biological-chemical).     

Characterisation of the initial degradation stage of Scots pine (<Emphasis Type="Italic">Pinus sylvestris</Emphasis> L.) sapwood after attack by brown-rot fungus <Emphasis Type="Italic">Coniophora puteana</Emphasis>

In our study, early period degradation (10 days) of Scots pine (Pinus sylvestris L.) sapwood by the brown-rot fungus Coniophora puteana (Schum.: Fr.) Karst. (BAM Ebw.15) was followed at the wood chemical composition and ultrastructurelevel, and highlighted the generation of reactive oxygen species (ROS). An advanced decay period of 50 days was chosen for comparison of the degradation dynamics. Scanning UV microspectrophotometry (UMSP) analyses of lignin distribution in wood cells revealed that the linkages of lignin and polysaccharides were already disrupted in the early period of fungal attack. An increase in the lignin absorption A₂₈₀ value from 0.24 (control) to 0.44 in decayed wood was attributed to its oxidative modification which has been proposed to be generated by Fenton reaction derived ROS. The wood weight loss in the initial degradation period was 2%, whilst cellulose and lignin content decreased by 6.7% and 1%, respectively. Lignin methoxyl (–OCH₃) content decreased from 15.1% (control) to 14.2% in decayed wood. Diffuse reflectance Fourier-transform infrared (DRIFT) spectroscopy corroborated the moderate loss in the hemicellulose and lignin degradation accompanying degradation. Electron paramagnetic resonance spectra and spin trapping confirmed the generation of ROS, such as hydroxyl radicals (HO^∙), in the early wood degradation period. Our results showed that irreversible changes in wood structure started immediately after wood colonisation by fungal hyphae and the results generated here will assist in the understanding of the biochemical mechanisms of wood biodegradation by brown-rot fungi with the ultimate aim of developing novel wood protection methods.     

Production of laccase and manganese peroxidase by<Emphasis Type="Italic"> Fomes sclerodermeus</Emphasis> grown on wheat bran

The aim of this work was to study the growth and production of ligninolytic enzymes by Fomes sclerodermeus using a natural medium based on wheat bran as the principal substrate in a solid-state fermentation. Growth was monitored by measuring the chitin content in the substrate. The maximum rate of growth was observed between days 7 and 18. A 38% total dry-weight loss of the substrate was measured after 28 days of cultivation. Differential hydrolysis of the substrate revealed that cellulose was more extensively degraded than lignin. In the 28-day incubation period, the losses of cellulose and lignin were 38 and 15%, respectively. No lignin peroxidase activity was found in any of the media tested. The maximum manganese-dependent peroxidase activity recorded was 6.3 U g⁻¹ at 14 days, while the maximum laccase activity was 270 U g⁻¹ at 28 days post-inoculation. Addition of commonly used inducers such as copper or manganese did not produce a further increase in the enzyme activities, nor did addition of glucose, asparagine, or malt extract. Electronic Publication     

Tuning the polylactide hydrolysis rate by plasticizer architecture and hydrophilicity without introducing new migrants

The possibility to tune the hydrolytic degradation rate of polylactide by plasticizer architecture and hydrophilicity without introduction of new degradation products was investigated by subjecting polylactide with cyclic oligolactide and linear oligolactic acid additives to hydrolytic degradation at 37 and 60 °C for up to 39 weeks. The more hydrophilic oligolactic acid plasticizer led to larger water uptake and rapid migration of plasticizer from the films into the aging water. This resulted in a porous material more susceptible to further hydrolysis. During hydrolysis at 37 °C the mass loss was generally 10-20% higher for the material containing linear oligolactic acid plasticizers. The hydrolysis accelerating effect of the linear oligolactic acid is probably counteracted by the higher degree of crystallinity in the films containing oligolactic acid additives. The degradation process was monitored by measurements of mass loss, water uptake, molar mass changes, material composition changes, surface changes, and thermal properties. The water-soluble degradation products were analyzed by following pH changes and identified by electrospray ionization-mass spectrometry (ESI-MS). The time frame for formation of water-soluble products was influenced by the architecture and hydrophilicity of the plasticizer. Furthermore, the advantage with oligolactide and oligolactic acid plasticizers was clearly demonstrated as they do not introduce any new migrants into the degradation product patterns.     

Promotion of polylactide degradation by ammonia under hyperthermophilic anaerobic conditions

The objective of this study was to evaluate the promotion effect of ammonia on the biodegradation of polylactide (PLA) under hyperthermophilic (80 °C) and thermophilic (55 °C) anaerobic condition. The results showed that PLA was transformed to lactic acid under hyperthermophilic conditions, but that the transformation ratio was negligible under thermophilic conditions. The hydrolysis process can be markedly increased with ammonia addition and microorganism activity. The maximum transformation ratios of the two kinds of PLA used in this study were 65.2% and 51.8%, respectively, with ammonia addition of 4 g N/L over 3 days treatment of anaerobic sludge. After the hyperthermophilic pretreatment, the hydrolysis products were converted to methane by methanogens under the thermophilic and anaerobic conditions. The final methane conversion ratios of the two kinds of PLA after 22 days treatment were 81.8% and 77.0%, respectively.     

Correlating physical changes and enhanced enzymatic saccharification of pine flour pretreated by N-methylmorpholine-N-oxide

Pretreatment of lignocellulosic biomass by N-methylmorpholine-N-oxide (NMMO), a solvent used in the textile industry to dissolve cellulose for production of regenerated cellulose fibers, was observed to enhance significantly enzymatic saccharification and fermentation. The enhancement was speculated to have been caused by reduced cellulose crystallinity after dissolution and precipitation processes. This work focused on assessing several physical changes and their correlations to enzymatic saccharification of pine flour after NMMO pretreatment. Results from microstructure, surface chemical composition, and cellulose accessibility complementarily illustrated the enrichment of cellulose on pine flour surface after NMMO pretreatment. Cellulose accessibility was highly correlated to the overall glucan conversion rate. Changes in crystallinity were correlated to the initial hydrolysis rate but not overall glucan conversion rate. Findings from this work may contribute to lignocellulosic bioenergy from development of novel pretreatment technologies utilizing NMMO.     

Analysis of exposed cellulose surfaces in pretreated wood biomass using carbohydrate‐binding module (CBM)–cyan fluorescent protein (CFP)

In enzymatic saccharification of lignocellulosics, the access of the enzymes to exposed cellulose surfaces is a key initial step in triggering hydrolysis. However, knowledge of the structure–hydrolyzability relationship of the pretreated biomass is still limited. Here we used fluorescent‐labeled recombinant carbohydrate‐binding modules (CBMs) from Clostridium josui as specific markers for crystalline cellulose (CjCBM3) and non‐crystalline cellulose (CjCBM28) to analyze the complex surfaces of wood tissues pretreated with NaOH, NaOH–Na₂S (kraft pulping), hydrothermolysis, ball‐milling, and organosolvolysis. Japanese cedar wood, one of the most recalcitrant softwood species was selected for the analysis. The binding analysis clarified the linear dependency of the exposure of crystalline and non‐crystalline cellulose surfaces for enzymatic saccharification yield by the organosolv and kraft delignification processes. Ball‐milling for 5–30 min increased saccharification yield up to 77%, but adsorption by the CjCBM–cyan fluorescent proteins (CFPs) was below 5%. Adsorption of CjCBM–CFPs on the hydrothermolysis pulp were less than half of those for organosolvolysis pulp, in coincidence with low saccharification yields. For all the pretreated wood, crystallinity index was not directly correlated with the overall saccharification yield. Fluorescent microscopy revealed that CjCBM3–CFP and CjCBM28–CFP were site‐specifically adsorbed on external fibrous structures and ruptured or distorted fiber surfaces. The assay system with CBM–CFPs is a powerful measure to estimate the initiation sites of hydrolysis and saccharification yields from chemically delignified wood pulps. Biotechnol. Bioeng. 2010; 105: 499–508. © 2009 Wiley Periodicals, Inc.     

Concurrent microscopic observations and activity measurements of cellulose hydrolyzing and methanogenic populations during the batch anaerobic digestion of crystalline cellulose

This study compares process data with microscopic observations from an anaerobic digestion of organic particles. As the first part of the study, this article presents detailed observations of microbial biofilm architecture and structure in a 1.25-L batch digester where all particles are of an equal age. Microcrystalline cellulose was used as the sole carbon and energy source. The digestions were inoculated with either leachate from a 220-L anaerobic municipal solid waste digester or strained rumen contents from a fistulated cow. The hydrolysis rate, when normalized by the amount of cellulose remaining in the reactor, was found to reach a constant value 1 day after inoculation with rumen fluid, and 3 days after inoculating with digester leachate. A constant value of a mass specific hydrolysis rate is argued to represent full colonization of the cellulose surface and first-order kinetics only apply after this point. Additionally, the first-order hydrolysis rate constant, once surfaces were saturated with biofilm, was found to be two times higher with a rumen inoculum, compared to a digester leachate inoculum. Images generated by fluorescence in situ hybridization (FISH) probing and confocal laser scanning microscopy show that the microbial communities involved in the anaerobic biodegradation process exist entirely within the biofilm. For the reactor conditions used in these experiments, the predominant methanogens exist in ball-shaped colonies within the biofilm.     

Solid state fermentation of oat straw by Polyporus sp A-336 and the effect of added sugars

Summary Supplementing oat straw in SSF by Polyporus sp A-336 with xylose, mannose, glucose and arabinogalactan at levels of 5 and 10% of straw weight stimulated lignin degradation and cellulose hydrolysis. Degradation of lignin, hemicellulose and cellulose was monitored for 30 days in plain straw, and straw plus xylose and showed that xylose shortened the lag in lignin breakdown and slowed hemicellulose utilization. At 24 days, similar polymer losses occurred in both systems and enzymatic cellulose hydrolysis had reached a maximum of 47% weight loss.     

Enantioselective degradation of dufulin pesticide in water: Uptake,thermodynamics, and kinetics studies

Kudzu (Pueraria thunbergiana) plant extract impregnated sediments were used for abiotic and biotic uptakes and biodegradation. The optimized conditions were 25 μg L^?1 concentration, 7 days for abiotic uptake and 56 days for biotic uptake and biodegradation, dose 2 g L^?1, 7 pH, and 35°C temperature. The amount removed of dufulin was 32.6% in abiotic conditions while these were 90% in the case of biotic uptake and biodegradation. Enantioselective biodegradation indicated that S‐(+)‐enantiomer degraded faster (90%) than R‐(?)‐enantiomer (87%). The data for abiotic and biotic uptakes and biodegradation followed well Langmuir, thermodynamics, and kinetics models. All these processes followed pseudo first‐order kinetics. It was observed that biodegradation was three times responsible for dufulin removal than simple sorption uptake (abiotic and biotic). The abiotic and biotic uptakes and biodegradation were quite fast and endothermic nature. The developed method may be used to remove the racemic and enantiomeric dufulin in water.     

Enzymatic hydrolysis and recrystallization behavior of initially amorphous cellulose

Cellulose samples from cotton and wood pulps with varying low degrees of crystallinity (mechanically decrystallized) were studied. The influence of initial cellulose crystallinity on sugar yield after enzymatic hydrolysis was determined by two different methods. As expected, samples with low crystallinity were much more accessible to enzymatic attack and glucose yields were higher than were samples of high initial crystallinity. Hydrolysis of cellulose seems more dependent on cellulose crystallinity than on the source of cellulose. It is known that decrystallized or amorphous cellulose can recrystallize under proper conditions, e.g., during acid hydrolysis. The data reported here also reveal some recrystallization during enzymatic hydrolysis which probably occurs simulataneously with a selective enzymatic attack on the amorphous regions of cellulose. In all cases, the amorphous celluloses recrystallized in the original lattice form, that of native cellulose.     

Production of sugars from wood using high-pressure hydrogen chloride

Saturating wood particles with HCl gas under pressure was found to be an effective pretreatment prior to subjecting wood to dilute acid hydrolysis. Pretreament is necessary to release sugars from wood because of the tight lattice structure of cellulose. The HCl gas makes the cellulose more susceptible to subsequent acid hydrolysis and the glucose yield is doubled when dilute acid hydrolysis is preceded by HCl saturation at high pressure. The saturation was most effectively performed in a fluidized bed reactor, with pure HCl gas fluidizing an equal volume of ground wood plus inert particles. The fluidized bed effectively dissipated the large amount of heat released upon HCl absorption into the wood. Batch reaction times of 1 h at 315 psia gave glucose yields of 80 degrees and xylose yields of 95 degrees after dilute acid hydrolysis. A model was developed which proposed gas diffusing through the solid as limiting the reaction rate and this was found to effectively describe the HCl-wood reaction in the fluidized bed. The HCl was found to form a stable adduct with the lignin residue in the wood, in a ratio of 3.33 mole of lignin monomer. The adduct was broken upon the addition of water.     

Review of recent research into cellulosic whiskers, their properties and their application in nanocomposite field

There are numerous examples where animals or plants synthesize extracellular high-performance skeletal biocomposites consisting of a matrix reinforced by fibrous biopolymers. Cellulose, the world's most abundant natural, renewable, biodegradable polymer, is a classical example of these reinforcing elements, which occur as whisker-like microfibrils that are biosynthesized and deposited in a continuous fashion. In many cases, this mode of biogenesis leads to crystalline microfibrils that are almost defect-free, with the consequence of axial physical properties approaching those of perfect crystals. This quite "primitive" polymer can be used to create high performance nanocomposites presenting outstanding properties. This reinforcing capability results from the intrinsic chemical nature of cellulose and from its hierarchical structure. Aqueous suspensions of cellulose crystallites can be prepared by acid hydrolysis of cellulose. The object of this treatment is to dissolve away regions of low lateral order so that the water-insoluble, highly crystalline residue may be converted into a stable suspension by subsequent vigorous mechanical shearing action. During the past decade, many works have been devoted to mimic biocomposites by blending cellulose whiskers from different sources with polymer matrixes.     

Conversion of Japanese red pine wood (Pinus densiflora) into valuable chemicals under subcritical water conditions

A comparative study on the decomposition of Japanese red pine wood under subcritical water conditions in the presence and absence of phosphate buffer was investigated in a batch-type reaction vessel. Since cellulose makes up more than 40-45% of the components found in most wood species, a series of experiments were also carried out using pure cellulose as a model for woody biomass. Several parameters such as temperature and residence time, as well as pH effects, were investigated in detail. The best temperature for decomposition and hydrolysis of pure cellulose was found around 270 °C. The effects of the initial pH of the solution which ranged from 1.5 to 6.5 were studied. It was found that the pH has a considerable effect on the hydrolysis and decomposition of the cellulose. Several products in the aqueous phase were identified and quantified. The conditions obtained from the subcritical water treatment of pure cellulose were applied for the Japanese red pine wood chips. As a result, even in the absence of acid catalyst, a large amount of wood sample was hydrolyzed in water; however, by using phosphate buffer at pH 2, there was an increase in the hydrolysis and dissolution of the wood chips. In addition to the water-soluble phase, acetone-soluble and water-acetone-insoluble phases were also isolated after subcritical water treatment (which can be attributed mainly to the degraded lignin, tar, and unreacted wood chips, respectively). The initial wood:acid ratio in the case of reactions catalyzed by phosphate buffer was also investigated. The results showed that this weight ratio can be as high as 3:1 without changing the catalytic activity. The size of the wood chips as one of the most important experimental parameters was also investigated.     

Homogeneous suspensions of individualized microfibrils from TEMPO-catalyzed oxidation of native cellulose

Never-dried native celluloses (bleached sulfite wood pulp, cotton, tunicin, and bacterial cellulose) were disintegrated into individual microfibrils after oxidation mediated by the 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) radical followed by a homogenizing mechanical treatment. When oxidized with 3.6 mmol of NaClO per gram of cellulose, almost the totality of sulfite wood pulp and cotton were readily disintegrated into long individual microfibrils by a treatment with a Waring Blendor, yielding transparent and highly viscous suspensions. When observed by transmission electron microscopy, the wood pulp and cotton microfibrils exhibited a regular width of 3-5 nm. Tunicin and bacterial cellulose could be disintegrated by sonication. A bulk degree of oxidation of about 0.2 per one anhydroglucose unit of cellulose was necessary for a smooth disintegration of sulfite wood pulp, whereas only small amounts of independent microfibrils were obtained at lower oxidation levels. This limiting degree of oxidation decreased in the following order: sulfite wood pulp > cotton > bacterial cellulose, tunicin.     

Effects of organosolv pretreatment and enzymatic hydrolysis on cellulose structure and crystallinity in Loblolly pine

Ethanol organosolv pretreatment was performed on Loblolly pine to enhance the efficiency of enzymatic hydrolysis of cellulose to glucose. Solid-state ¹³C NMR spectroscopy coupled with line shape analysis was used to determine the structure and crystallinity of cellulose isolated from pretreated and enzyme-hydrolyzed Loblolly pine. The results indicate reduced crystallinity of the cellulose following the organosolv pretreatment, which renders the substrate easily hydrolyzable by cellulase. The degree of crystallinity increases and the relative proportion of para-crystalline and amorphous cellulose decreases after enzymatic hydrolysis, indicating preferential hydrolysis of these regions by cellulase. The structural and compositional changes in this material resulting from the organosolv pretreatment and cellulase enzyme hydrolysis of the pretreated wood were studied with solid-state CP/MAS ¹³C NMR spectroscopy. NMR spectra of the solid material before and after the treatments show that hemicelluloses and lignin are degraded during the organosolv pretreatment.     

Adsorption of cellulase from Trichoderma reesei on cellulose and lignacious residue in wood pretreated by dilute sulfuric acid with explosive decompression

The adsorption of cellulase on cellulose and a lignacious residue was examined by using cellulase from Trichoderma reesei, hardwood pretreated by dilute sulfuric acid under high pressure, and a lignacious residue prepared by a complete enzymatic hydrolysis of the pretreated wood. A significant amount of cellulase was found to adsorb on the lignacious residue during the hydrolysis of the pretreated wood. Hence, the adsorption of enzyme on the lignacious residue as well as cellulose must be taken into account in the development of the hydrolysis kinetics. It was found that the adsorption of enzyme on cellulose and on the lignacious residue could be represented by Langmuir type isotherms. The data show that the pretreatment at a higher temperature results in more enzyme adsorption on the cellulose fraction and less on the lignacious residue fraction. The relationship between the hydrolysis rate and the amount of enzyme adsorbed is discussed.