<Emphasis Type="Italic">Agrobacterium</Emphasis>-mediated transformation of Perilla (<Emphasis Type="Italic">Perilla frutescens</Emphasis>)

Agrobacterium tumefaciens-mediated transformation system for perilla (Perilla frutescens Britt) was developed. Agrobacterium strain EHA105 harboring binary vector pBK I containing bar and γ-tmt cassettes or pIG121Hm containing nptII, hpt, and gusA cassettes were used for transformation. Three different types of explant, hypocotyl, cotyledon and leaf, were evaluated for transformation and hypocotyl explants resulted in the highest transformation efficiency with an average of 3.1 and 2.2%, with pBK I and pIG121Hm, respectively. The Perilla spp. displayed genotype-response for transformation. The effective concentrations of selective agents were 2 mg l⁻¹ phosphinothricin (PPT) and 150 mg l⁻¹ kanamycin, respectively, for shoot induction and 1 mg l⁻¹ PPT and 125 mg l⁻¹ kanamycin, respectively, for shoot elongation. The transformation events were confirmed by herbicide Basta spray or histochemical GUS staining of T₀ and T₁ plants. The T-DNA integration and transgene inheritance were confirmed by PCR and Southern blot analysis of random samples of T₀ and T₁ transgenic plants.     

Physico-chemical characterization of exomannan from <Emphasis Type="Italic">Rhodotorula acheniorum</Emphasis> MC

The batch fermentation of Rhodotorula acheniorum MC on a culture medium containing 5% sucrose, mineral salts and yeast extract at 26 °C for 96 h, with aeration at 0.75 v/v/m and agitation at 500 rev min ⁻¹ resulted in the synthesis of an exopolysaccharide (6.2 g l ⁻¹) which formed two fractions upon precipitation. The fractions were purified to a carbohydrate content of 98.2% for fraction I and 87.3% for fraction II. Mannose was the main monosaccharide component in a 92.8% concentration in fraction I and a 90.6% concentration in Fraction II. The exopolysaccharide was thus a mannan. The gel chromatograms confirmed the chemical composition of both fractions. The molecular weight of mannan I was 310 kD, whereas that of mannan II was 249 kD. The mannan I intrinsic viscosity [η]=6.23 dl g⁻¹ was higher than that of mannan II [η]=2.73 dl g⁻¹. The water-binding capacity of the mannan samples was established within the 1.2–3.5 g g⁻¹ range. The multiplicative model [η]=387.22. D_r^−0.1913. T^−1.095. C^1.814 describing the effect of the velocity gradient D_r, the exomannan concentration C and the temperature T on the dynamic viscosity values η of polymer solutions was obtained.     

Pathogenicity of <Emphasis Type="Italic">Beauveria bassiana</Emphasis> and <Emphasis Type="Italic">Metarhizium anisopliae</Emphasis> to the tobacco spider mite <Emphasis Type="Italic">Tetranychus evansi</Emphasis>

Seventeen isolates of Metarhizium anisopliae (Metschnikoff) Sorokin and two isolates of Beauveria bassiana (Balsamo) Vuillemin were evaluated for their pathogenicity against the tobacco spider mite, Tetranychus evansi Baker & Pritchard. In the laboratory all the fungal isolates were pathogenic to the adult female mites, causing mortality between 22.1 and 82.6%. Isolates causing more than 70% mortality were subjected to dose–response mortality bioassays. The lethal concentration causing 50% mortality (LC₅₀) values ranged between 0.7×10⁷ and 2.5×10⁷ conidia ml⁻¹. The lethal time to 50% mortality (LT₅₀) values of the most active isolates of B. bassiana and M. anisopliae strains varied between 4.6 and 5.8 days. Potted tomato plants were artificially infested with T. evansi and treated with B. bassiana isolate GPK and M. anisopliae isolate ICIPE78. Both fungal isolates reduced the population density of mites as compared to untreated controls. However, conidia formulated in oil outperformed the ones formulated in water. This study demonstrates the prospects of pathogenic fungi for the management of T. evansi.     

<Emphasis Type="Italic">In vitro</Emphasis> plant regeneration of the heavy metal tolerant and hyperaccumulator <Emphasis Type="Italic">Arabidopsis halleri</Emphasis> (Brassicaceae)

Plants were regenerated from root explants of Arabidopsis halleri (L.) O’Kane and Al-Shehbaz via a three-step procedure callus induction, induction of somatic embryos and shoot development. Callus was induced from root segments, leaflets and petiole segments after incubation for 2 weeks in Murashige and Skoog medium (MS) supplemented with 0.5 mg/l⁻¹ (2.26 μM) 2,4-D (2,4-dichlorophenoxyacetic acid) and 0.05 mg/l⁻¹ (0.23 μM) kinetin. Only calli developed from root segments continued to grow when transferred to a regeneration medium containing 2.0 mg/l⁻¹ (9.8 μM) 6-γ-γ-(dimethylallylamino)-purine (2ip) and 0.05 mg/l⁻¹ (2.68 μM) α-naphthalenacetic acid (NAA) and eventually 40 of them developed embryogenic structures. On the same medium 38 of these calli regenerated shoots. Rooting was achieved for 50 of the shoots subcultured in MS medium without hormones. The regeneration ability of callus derived from root cuttings, observed in this study, makes this technique useful for genetic transformation experiments and in vitro culture studies.     

Protoplast isolation and culture for somatic hybridization of <Emphasis Type="Italic">Lupinus angustifolius</Emphasis> and <Emphasis Type="Italic">L</Emphasis>. <Emphasis Type="Italic">subcarnosus</Emphasis>

A method for isolation and shoot regeneration from electrofused protoplasts of L. angustifolius and L. subcarnosus was developed. Viable protoplasts were isolated from leaves of in-vitro grown seedlings at an average yield of 6 × 10⁵ protoplasts g⁻¹ fresh weight. Liquid and agarose solidified B5 media were used for protoplast culture. In the liquid-culture system, all tested media, VKM, P1 and KM8p, were applicable for inducing cell division (84% of all tested petri dishes at four weeks) and colony formation. Media containing additional carbohydrates were suitable to produce compact calli with green and brown pigmentations in different combinations. Analysis of callus with molecular markers allowed to identify six somatic hybrids. However, none of the parental-protoplast derived cell colonies could develop shoots. This is the first report on protoplast fusion of L. angustifolius and L. subcarnosus with subsequent shoot regeneration.     

<Emphasis Type="Italic">Agrobacterium</Emphasis>-mediated transformation of <Emphasis Type="Italic">Pisum sativum in vitro</Emphasis> and <Emphasis Type="Italic">in vivo</Emphasis>

Six pea (Pisum sativum L.) cultivars (Adept, Komet, Lantra, Olivin, Oskar, Tyrkys) were transformed via Agrobacterium tumefaciens strain EHA105 with pBIN19 plasmid carrying reporter uidA (β-glucuronidase, GUS, containing potato ST-LS1 intron) gene under the CaMV 35S promoter, and selectable marker gene nptII (neomycin phosphotransferase II) under the nos promoter. Two regeneration systems were used: continual shoot proliferation from axillary buds of cotyledonary node in vitro, and in vivo plant regeneration from imbibed germinating seed with removed testa and one cotyledon. The penetration of Agrobacterium into explants during co-cultivation was supported by sonication or vacuum infiltration treatment. The selection of putative transformants in both regeneration systems carried out on media with 100 mg dm⁻³ kanamycin. The presence of introduced genes was verified histochemically (GUS assay) and by means of PCR and Southern blot analysis in T₀ putative transformants and their seed progenies (T₁ to T₃ generations). Both methods, but largely in vivo approach showed to be genotype independent, resulting in efficient and reliable transformation system for pea. The in vivo approach has in addition also benefit of time and money saving, since transgenic plants are obtained in much shorter time. All tested T₀ – T₃ plants were morphologically normal and fertile.This research was supported by the National Agency for Agricultural Research (grants No. QE 0046 and QF 3072) and Ministry of Education of the Czech Republic (grant No. ME 433).     

Rapid regeneration of <Emphasis Type="Italic">Phaseolus angustissimus</Emphasis> and <Emphasis Type="Italic">P. vulgaris</Emphasis> from very young zygotic embryos

A rapid regeneration protocol for proembryos of Phaseolus angustissimus as young as 1 day after pollination (DAP) involving pod culture for 1 week followed by embryo culture for 2 weeks and embryo germination for 1 or 2 weeks is provided. Optimization of the media was conducted with pods collected 3 DAP. The best pod culture medium was composed of basal medium [(Phillips and Collins 1979) salts with (Geerts et al. 2001) vitamins], 1000 mg l⁻¹ glutamine, 1000 mg l⁻¹ casein hydrolysate, 3% sucrose and 0.5% agar. Embryo culture medium consisted of basal medium with 500 mg l⁻¹ glutamine, 250 mg l⁻¹ casein hydrolysate, 1.9 μM ABA, 3% sucrose and 0.5% bacto-agar. Embryos developed into plantlets on germination medium containing basal medium with 0.25 μM BA, 3% sucrose and 0.7% bacto-agar. Fertile, normal plants were recovered from direct embryogenesis and from micrografted embryo-derived shoots. Embryos obtained from pods collected 3 DAP regenerated plantlets at a rate of 29.3%, while embryos from pods collected 2 DAP and 1 DAP regenerated at rates of 20.2 and 4%, respectively. A second accession of P. angustissimusregenerated at a rate of 26.2%. Using this 5-week protocol for P. vulgaris resulted in a plantlet regeneration rate of 12.5%.     

Improvement of nisin production in pH feed-back controlled,fed-batch culture by <Emphasis Type="Italic">Lactococcus lactis</Emphasis>subsp<Emphasis Type="Italic">. lactis</Emphasis>

Nisin production by Lactococcus lactis subsp. lactisin fed-batch culture was doubled by using a pH feed-back controlled method. Sucrose concentration was controlled at 10 g l^–1 giving 5010 IU nisin ml^–1 compared to 2660 IU nisin ml^–1 in batch culture.     

High-level production of arachidonic acid by fed-batch culture of <Emphasis Type="Italic"> Mortierella alpina</Emphasis> using NH<Subscript>4</Subscript>OH as a nitrogen source and pH control

Mortierella alpina was grown in a fed-batch culture using a 12-l jar fermenter with an initial 8-l working volume containing 20 g glucose l⁻¹ and 10 g corn-steep powder l⁻¹. Glucose was intermittently fed to give 32 g l⁻¹ at each time. The pH of culture was maintained using 14% (v/v) NH₄OH, which also acted as a nitrogen source. A final cell density of 72.5 g l⁻¹ was reached after 12.5 days with a content of arachidonic acid (ARA) at 18.8 g l⁻¹. These values were 4 and 1.8 times higher than the respective values in batch culture. Our results suggest that the combined feeding of glucose and NH₄⁺ to the growth of M. alpina could be applied for the industrial scale production of ARA.     

A repeated batch process for cultivation of <Emphasis Type="Italic">Bifidobacterium longum</Emphasis>

A repeated batch process was performed to culture Bifidobacterium longum CCRC 14634. An on-line device, oxidation-reduction potential (ORP), was used to monitor cell growth and uptake of nutrients in the culture. The ORP of the culture medium decreased substantially during fermentation until nutrients were depleted. Six cycles of batch fermentation using ORP as a control parameter were successfully carried out. As soon as ORP remained constant or increased, three-quarters of the broth was removed, and the same volume of fresh medium was fed to the fermenter for a new cycle of cultivation. Average cell concentrations of 1.9×10⁹ and 3.4×10⁹ cfu ml^–1 for repeated batch fermentation in MRS (Lactobacilli MRS broth) and WY (containing whey hydrolyzates, yeast extract, l-cysteine) medium, respectively, were achieved. Cell mass productivities for batch, fed-batch and repeated batch fermentation using MRS medium were 0.51, 0.41, and 0.64 g l^–1 h^–1, respectively, and those for batch and repeated batch using WY medium were 0.76, 0.99 g l^–1 h^–1, respectively. The results indicate a possible industrial process to culture Bifidobacteria sp.     

Purification and characterization of lignin peroxidases from <Emphasis Type="Italic">Penicillium decumbens</Emphasis> P6

Summary Peroxidases are essential enzymes in biodegradation of lignin and lignite which have been investigated intensively in the white-rot fungi. This is the first report of purification and characterization of lignin peroxidase from Penicillium sp. P6 as lignite degradation fungus. The results indicated that the lignin peroxidase of Penicillium decumbens P6 had physical and chemical properties and a N-terminal amino acid sequence different from the lignin peroxidases of white-rot fungi. The lignin peroxidase was isolated from a liquid culture of P. decumbens P6. This enzyme had a molecular weight of 46.3 KDa in SDS-PAGE and exhibited greater activity, temperature stability and wider pH range than those previously reported. The isolation procedure involved (NH₄)₂SO₄ precipitation, ion-exchange chromatography on DEAE-cellulose and CM-cellulose, gel filtration on Sephadex G-100, and non-denaturing, discontinuous polyacrylamide gel electrophoresis. The K _m and V _max values of this enzyme using veratryl alcohol as substrate were 0.565 mmol L ⁻¹ and 0.088 mmol (mg protein) ⁻¹ min ⁻¹ respectively. The optimum pH of P6 lignin peroxidase was 4.0, and 70.6 of the relative activity was remained at pH 9.0. The optimum temperature of the enzyme was 45 °C.     

Pilot-Scale Fermentation and Purification of the Recombinant Allophycocyanin Over-Expressed in <Emphasis Type="Italic">Escherichia coli</Emphasis>

A recombinant allophycocyanin (rAPC), used for treatment of tumors, has been expressed in E. coli which was grown in glucose fed-batch culture in a 30 l fermentor. Recombinant allophycocyanin was purified from soluble E. coli cell lysate using hydrophobic interaction chromatography followed by chromatography using amylose affinity column. The purity of product was greater than 98% and yielded an average of 5.5 g kg⁻¹ dry cells. Recombinant allophycocyanin significantly inhibited H₂₂ hepatoma (p ( 0.01) in mice with inhibition rates ranging from 36% to 62% with doses from 6.25 to 50 mg kg⁻¹ d⁻¹.     

Propagation of <Emphasis Type="Italic">Haemaria discolor</Emphasis> via <Emphasis Type="Italic">in vitro</Emphasis> seed germination

In vitro propagation protocol for Haemaria discolor (Ker) Lindl. var. dawsoniana by artificial cross-pollination and asymbiotic germination of seeds has been developed. Fruit set (100 %) was obtained when the pollinia and ovules of various aged flowers were used for pollination. In vitro germination of seeds obtained from capsules of various ages was achieved on half-strength Murashige and Skoog’s (MS) medium supplemented with 3 % sucrose and 0.85 % agar. The germinated seedlings were cultured on half-strength MS medium with 0.2 % activated charcoal, 8 % banana homogenate, 0.1 mg dm⁻³ 1-phenyl-3-(1,2,3-thiadiazol-5-yl)urea (TDZ) and 1 mg dm⁻³ α-naphthaleneacetic acid (NAA). Ninety-six percent of plantlets survived after hardening in greenhouse.This research was supported by grant (91AS-3.1.1-CI-C3) from the Council of Agriculture, Executive Yuan of Taiwan and grants (NSC-89-2317-B055-002 and NSC-91-2317-B324-001) from the National Science Council of Taiwan. This paper is Agricultural Research Institute Contribution No. 2158.     

Chromate reduction by <Emphasis Type="Italic">Bacillus megaterium</Emphasis> TKW3 isolated from marine sediments

Summary Bacillus megaterium strain TKW3 was isolated from multiple-metal-contaminated marine sediments of Tokwawan, Hong Kong SAR. This facultative aerobe utilized arabinose, mannitol, N-acetylglucosamine, maltose, caprate, citrate, butyrate or lactate as the sole source of carbon and energy for growth.B. megaterium TKW3 reduced highly toxic and soluble Cr⁶⁺ (as CrO₄²⁻) into almost non-toxic and insoluble Cr³⁺ under aerobic conditions. Complete reduction of 0.20 mM Cr⁶⁺ by B. megaterium TKW3 was achieved within 360 h. Initial Cr⁶⁺ concentration below 0.90 mM or inoculum less than 10⁷ cells ml⁻¹ did not have significant effect on ⁶⁺ reduction, while the residue Cr⁶⁺ concentration was the lowest at 10⁷ cells ml⁻¹. Cr⁶⁺ reduction by this strain was inhibited by high levels of NaCl (55%). B. megaterium TKW3 was also resistant to other oxyanions including 0.34 mM Cr₂O₇²⁻ 0.32 mM AsO₄³⁻, 0.58 mM SeO₃²⁻ and 0.53 mM SeO₄²⁻, and reduced soluble Se⁴⁺ (as SeO₃²⁻) to insoluble red amorphous Se⁰. B. megaterium TKW3 might have potential application in bioremediation of Cr-laden sediments associated with other oxyanions.     

Cells of <Emphasis Type="BoldItalic">Candida utilis</Emphasis> for <Emphasis Type="BoldItalic">in vitro</Emphasis> (<Emphasis Type="BoldItalic">R</Emphasis>)-phenylacetylcarbinol production in an aqueous/octanol two-phase reactor

(R)-Phenylacetylcarbinol (PAC), a pharmaceutical precursor, was produced from benzaldehyde and pyruvate by pyruvate decarboxylase (PDC) of Candida utilis in an aqueous/organic two-phase emulsion reactor. When the partially purified enzyme in this previously established in vitro process was replaced with C. utilis cells and the temperature was increased from 4 to 21 °C, a screen of several 1-alcohols (C4–C9) confirmed the suitability of 1-octanol as the organic phase. Benzyl alcohol, the major by-product in the commercial in vivo conversion of benzaldehyde and sugar to PAC by Saccharomyces cerevisiae, was not formed. With a phase volume ratio of 1:1 and 5.6 g C. utilis l⁻¹ (PDC activity 2.5 U ml⁻¹), PAC levels of 103 g l⁻¹ in the octanol phase and 12.8 g l⁻¹ in the aqueous phase were produced in 15 h at 21 °C. In comparison to our previously published process with partially purified PDC in an aqueous/octanol emulsion at 4 °C, PAC was produced at a 4-times increased specific rate (1.54 versus 0.39 mg U⁻¹ h⁻¹) with simplified catalyst production and reduced cooling cost. Compared to traditional in vivo whole cell PAC production, the yield on benzaldehyde was 26% higher, the product concentration increased 3.9-fold (or 6.9-fold based on the organic phase), the productivity improved 3.1-fold (3.9 g l⁻¹ h⁻¹) and the catalyst was 6.9-fold more efficient (PAC/dry cell mass 10.3 g g⁻¹).*Dedicated with gratitude to Prof. Dr. Franz Lingens – “Theo”.     

Aquacultural characteristics of <Emphasis Type="Italic">Rhizoclonium</Emphasis><Emphasis Type="Italic">riparium</Emphasis> and an evaluation of its biomass growth potential

A study was made of environmental factors affecting the growth of Rhizoclonium riparium in order to evaluate its suitability for large-scale culturing. The results indicate that under the natural conditions prevailing at Taishi, Taiwan, this species can grow year-round, with a monthly biomass production (oven-dried) of 945–1540 kg ha⁻¹ pond surface (assuming a pond depth of 1 m). The specific growth rate ranged from –2.1 to 10.4% per day. Salinity and temperature, both influenced the rate significantly, with optimal values at 20% and 25 °C, respectively. Short (2-mm) lengths of filaments had a higher specific growth rate than longer (20 mm) filaments. Under rotational culturing conditions, the specific growth rate was reduced when flow was increased.     

Impact of the infaunal Manila clam, <Emphasis Type="Italic">Ruditapes philippinarum</Emphasis>, on sediment stability

The aim of this study was to examine the impact of bioturbation by the Manila clam, Ruditapes philippinarum, on sediment stability. A laboratory benthic annular flume system (AFS) was deployed to evaluate the relationship between sediment stability of a subtidal mudflat and density of the infaunal clam under the influence of different current velocities. There was a significant correlation between mean erosion rate and current velocities in all treatments with clams (p < 0.001). There was also a significant correlation between mean erosion rate and R. philippinarum density (p < 0.001), reflecting bioturbation-enhanced sediment erosion. The effects of clam density on sediment erodability were more marked at the lower current velocities. In the control, the critical erosion velocity (Ū_crit) was about 32 cm s⁻¹. With increasing R. philippinarum density, Ū_crit decreased down to the minimum value of about 20 cm s⁻¹ at a density of 206 clams m⁻². This study demonstrated that the burrowing activity of R. philippinarum reduces sediment stability, particularly at relatively low current velocities (25 cm s⁻¹) and at densities below those found in the clam cultivation areas within the Sacca di Goro lagoon.     

Selection of atrazine-resistant plants by <Emphasis Type="Italic">in vitro</Emphasis> mutagenesis in pepper (<Emphasis Type="Italic">Capsicum annuum</Emphasis>)

The effects of atrazine on cotyledon cultures of Capsicum annuum (L.) cv. G₄ were investigated with a view of establishing a system for in vitro selection of resistant mutants. At low levels of herbicide produced little growth inhibition, some chlorophyll loss occurred associated with the production of albino shoots. At 20 mg l⁻¹ atrazine bleaching was more pronounced and was accompanied by the development of necrotic spots; however, efficient bleaching was associated with severe suppression of growth. Mutagenized cotyledon explants resulted in production of herbicide-resistant plants on medium containing selective levels of sucrose (0.5%) and atrazine (20 mg l⁻¹). Differential morphogenetic responses were observed when the levels of sucrose (0.5–5%) were altered. Shoot regeneration was maximum in 2 sucrose and the regenerating ability decreased with a further increase in sucrose concentration (3%–5%). However, lowering of sucrose concentration from 2 to 0.5% caused complete bleaching of explants and permitted the selection of herbicide-resistant plants. Complete atrazine-resistant plantlets were obtained after rooting of regenerated green shoots on rooting medium containing 10 mg l⁻¹atrazine, 1.0 mg l⁻¹IAA and 0.5% sucrose. Leaf-segment assay of differentiated plants revealed that all regenerants were resistant to the atrazine. Reciprocal crosses between atrazine-resistant and -sensitive plants showed a non-Mendelian transmission of resistance trait.     

Effects of Growth Regulators on Direct Flowering of Isolated Ginseng Buds <Emphasis Type="Italic">in vitro</Emphasis>

An in vitro method for obtaining gingseng inflorescences directly from explants of gingseng (Panax ginseng) is reported. Isolated shoot-buds of somatic embryo-derived plantlets ginseng were used as explants and incubated in B5 medium supplemented with 1 mg l⁻¹ benzyladenine (BA) and 1 mg l⁻¹ gibberellic acid (GA₃). About 15% of the buds flowered directly without developing vegetative organs. Cytokinin was found to be the key factor for inducing these isolated buds to proliferate and flower, but both these processes also occurred when benzyladenine (BA) was replaced by thidiazuron (TDZ). The optimal concentration of TDZ for obtaining the best ratios of bud proliferation and total flowering was 0.1 mg l⁻¹, while the highest number of vegetative shoots was obtained in medium supplemented with 1 mg l⁻¹ GA₃ and 0.1 mg l⁻¹ TDZ. The explant elongated abnormally in the presence of 10 mg l⁻¹ GA₃. Although a low concentration (1 mg l⁻¹) of NAA increased the bud proliferation ratio in the medium supplemented with 0.1 mg l⁻¹ TDZ and 1 mg l⁻¹ GA₃, a high concentration (5 mg l⁻¹) of NAA reduced the bud proliferation ratio and inhibited the flowering.     

Optimalization of the peroxidase production by tissue cultures of horseradish <Emphasis Type="Italic">in vitro</Emphasis>

Tissue cultures of Armoracia rusticana L., both transformed with Agrobacterium rhizogenes and nontransformed, were screened for peroxidase activity. Most of the derived and tested strains exhibited 20 times higher activity [from 99 to 723 U g⁻¹(d.m.)] than the root of the intact plant [(30 U g⁻¹ (d.m.)]. The highest peroxidase activity was found in tumour culture growing on the medium without growth regulators. The influence of the addition of sugars and heavy metal ions in the medium on peroxidase production was tested. Increase in peroxidase activity was observed after cultivation of horseradish culture with cadmium, cobalt, nickel or lead ions.This work is supported by Grant Agency of Czech Republic Project No. 526/04/0135.