Molecular analysis of plasmid pAP4 from Acetobacter pasteurianus

The complete nucleotide sequence of plasmid pAP4 isolated from Acetobacter pasteurianus 2374^T has been determined. Plasmid pAP4 was analysed and found to be 3,870 bp in size with a G+C content of 50.1%. Computer assisted analysis of sequence data revealed 2 possible ORFs with typical promoter regions. ORF1 codes for a protein responsible for kanamycin resistance similar with Tn5 transposone, ORF2 encodes a resistance to ampicillin identical with Tn3 transposone. Plasmid has in A. pasteurianus five copies and in E. coli DH1 about 30 copies per chromosome and it segregation stability in both strains is very high. Based on the data on replication region, plasmid does not code for a replication protein and origin region is similar with ColE1-like plasmid.     

A simple method for shortening a plasmid genome using a system of plasmid cointegration mediated by a Tn3 mutant

This paper describes a simple method for the isolation of small plasmids of various sizes from pSMI, a derivative of the resistance plasmid R 100. The method is based on the observation that a repressor-negative mutant of the ampicillin-resistance (amp^r) transposon Tn3, Tn3 No. 5, mediates cointegration of a plasmid carrying Tn 3 No. 5 (pMB8::Tn 3 No. 5) into virtually any site on pSMI. The resulting cointegrate plasmids contain the pSMI sequence which is joined with the amp^r gene of the Tn 3 mutant. This cointegration is so frequent that large cointegrate plasmids can be readily detected in the total plasmid DNA prepared from cells carrying pSMI and pMB8::Tn3 No. 5. We were able to isolate small plasmids of various sizes by digesting the total plasmid DNAs with restriction endonucleases which cut both pSM 1 and Tn3 No. 5 sequences present in the cointegrates and subsequently ligating the restriction fragment containing both the amp^r gene and the region necessary for replication of pSMI. Analysis of these plasmids, named pBV plasmids, with restriction endonucleases and by nucleotide sequencing allowed us to determine regions necessary or unnecessary for replication, thus defining a minimal replication region of pSMI. The present method is generally useful for the isolation of small derivatives from any large plasmid for the study of genes and sites adjacent to or within the minimal replication region of the plasmid.     

Identification of the number of mutant copies of the genetic transfer factor AP42

The copy number mutant of genetic transfer factor pAP42 (incFIX) was induced by the treatment of E. coli AP115 cells carrying the plasmid by N-methyl-N-nitro-N-nitrosoguanidine. The copy number mutant pAP42::Tn1cop1 is characterized by the increased copy number. The cells carrying the copy number mutant have a higher ampicillin resistance and higher beta-lactamase activity. Mutant plasmid pAP42: :Tn1cop1 is incompatible with plasmid pAP42 and compatible with plasmids of the other inc-groups of F-like plasmids.     

Plasmid pB8 is closely related to the prototype IncP-1beta plasmid R751 but transfers poorly to Escherichia coli and carries a new transposon encoding a small multidrug resistance efflux protein

The IncP-1beta plasmid pB8, which confers resistance to amoxicillin, spectinomycin, streptomycin, and sulfonamides, was previously isolated from a sewage treatment plant. It was found to possess abnormal conjugative transfer properties, i.e., transfer to Escherichia coli by conjugation or electroporation could not be detected. We showed in this study that plasmid pB8 is transferable to E. coli by conjugation, but only at low frequencies and under specific experimental conditions, a phenomenon that is very unusual for IncP-1 plasmids. Determination of the complete 57,198bp pB8 nucleotide sequence revealed that the backbone of the plasmid consists of a complete set of IncP-1beta-specific genes for replication initiation, conjugative plasmid transfer, stable inheritance, and plasmid control with an organisation identical to that of the prototype IncP-1beta plasmid R751. All of the minor differences in the pB8 backbone sequence compared to that of R751 were also found in other IncP-1beta plasmids known to transfer to and replicate in E. coli. Plasmids pB8 and R751 can be distinguished with respect to their accessory genetic elements. First, the pB8 region downstream of the replication initiation gene trfA contains two transposable elements one of which is similar to Tn5501. The latter transposon encodes a putative post-segregational-killing system and the small multidrug resistance (SMR) protein QacF, mediating quaternary ammonium compound resistance. The accessory genes in this region are not responsible for the poor plasmid transfer to E. coli since a pB8 deletion derivative devoid of all genes in that region showed the same conjugative transfer properties as pB8. A Tn5090/Tn402 derivative carrying a class 1 integron is located between the conjugative transfer modules. The Tn5090/Tn402 integration-sites are exactly identical on pB8 and R751 but in contrast to R751 the pB8 element carries the resistance gene cassettes oxa-2 for amoxicillin resistance and aadA4 for streptomycin/spectinomycin resistance, the integron-specific conserved segment consisting of the genes qacEDelta1, sul1, and orf5, and a truncated tni transposition module (tniAB). Although future work will have to determine the molecular basis for the poor transfer of pB8 to E. coli, our findings demonstrate that the host-range of typical IncP-1 plasmids may be less broad than expected.     

Compatibility between F-like genetic transfer factors

A study has been made of compatibility among four F-like factors of genetic transfer (pAP22-4, pAP38, pAP39 and pAP41) labeled separately by transpozones Tn1 and Tn9. It has been established that pAP38 transfer factor is compatible with plasmids pAP22-4, pAP39 and pAP412, while pAP41 transfer factor is compatible with plasmids pAP22-4 and pAP38 but is incompatible with plasmid pAP39.     

Complete sequence of the IncP-9 TOL plasmid pWW0 from Pseudomonas putida

The TOL plasmid pWW0 (117 kb) is the best studied catabolic plasmid and the archetype of the IncP-9 plasmid incompatibility group from Pseudomonas. It carries the degradative (xyl) genes for toluenes and xylenes within catabolic transposons Tn4651 and Tn4653. Analysis of the complete pWW0 nucleotide sequence revealed 148 putative open reading frames. Of these, 77 showed similarity to published sequences in the available databases predicting functions for: plasmid replication, stable maintenance and transfer; phenotypic determinants; gene regulation and expression; and transposition. All identifiable transposition functions lay within the boundaries of the 70 kb transposon Tn4653, leaving a 46 kb sector containing all the IncP-9 core functions. The replicon and stable inheritance region was very similar to the mini-replicon from IncP-9 antibiotic resistance plasmid pM3, with their Rep proteins forming a novel group of initiation proteins. pWW0 transfer functions exist as two blocks encoding putative DNA processing and mating pair formation genes, with organizational and sequence similarity to IncW plasmids. In addition to the known Tn4651 and IS1246 elements, two additional transposable elements were identified as well as several putative transposition functions, which are probably genetic remnants from previous transposition events. Genes likely to be responsible for known resistance to ultraviolet light and free radicals were identified. Other putative phenotypic functions identified included resistance to mercury and other metal ions, as well as to quaternary ammonium compounds. The complexity and size of pWW0 is largely the result of the mosaic organization of the transposable elements that it carries, rather than the backbone functions of IncP-9 plasmids.     

Identification of the origin of replications and partial characterization of plasmid pRK100

In search for the evolutionary origin of the conjugative F-like plasmid pRK100, the plasmid's functional replication regions were identified. Additionally targeted genetic analysis was used to investigate origins of other regions of the plasmid. Construction of minireplicons via ligation of Tn1725 with plasmid fragments and targeted cloning of putative replication regions, followed by sequence analysis indicated two functional replication regions, a F plasmid related RepFIB and a R1 plasmid related RepFIIA replication region. Partial nucleotide sequencing of regions of the plasmid revealed genes that encode a putative enterochelin iron uptake system previously associated with an Escherichia coli pathogenicity island, PAI III536, and the pColV-like aerobactin genes. In addition, a homologue of the R100 plasmid related rmoA gene was found that exhibits strong similarity to hha/ymoA encoding the Hha/YmoA class of modulators of gene expression. PCR and hybridization experiments further demonstrated that pRK100 harbors multiple IS2 and IS3 insertion sequences that may have facilitated in the acquisition of elements from other DNA molecules. These data together with the previous identification of a F-like tra region and a pColIa-like colicin Ia, indicate that pRK100 has a highly mosaic structure with elements derived from many different known large natural plasmids.     

Genetic regulation of the function of E. coli plasmid pAP42 transfer genes

Sensitivity of the genetic transfer system of F-like plasmid pAP42 marked with the transposons Tn1 and TN9 to fertility inhibitors of six reference Fin-groups was studied. It was shown that transfer function and donor-specific piliformation of the plasmid under study were inhibited by reference plasmids of FinU and FinV groups, surface exclusion by plasmids of FinU and FinQ groups. The different influence of the FinOP group plasmid on transfer functions of the marked plasmids pAP42::Tn1 and pAP42::Tn9 that is likely to be connected with the effect of incorporated transposons was determined.     

The Arcanobacterium (Actinomyces) pyogenes Plasmid pAP1 Is a Member of the pIJ101/pJV1 Family of Rolling Circle Replication Plasmids

The 2.4-kb plasmid pAP1 from Arcanobacterium (Actinomyces) pyogenes had sequence similarity within the putative replication protein and double-stranded origin with the pIJ101/pJV1 family of plasmids. pJGS84, a derivative of pAP1 containing a kanamycin resistance gene, was able to replicate in Escherichia coli and Corynebacterium pseudotuberculosis, as well as in A. pyogenes. Detection of single-stranded DNA intermediates of pJGS84 replication suggested that this plasmid replicates by the rolling circle mechanism.     

The systems of the genetic regulation of plasmid transfer fin K, fin L, fin M and fin N]

F-like plasmids pAP19-1::Tn9, pAP20::Tn9, pAP22-1::Tn1, pAP27 characterized by the presence of unique genetic plasmid transfer regulatory systems in their genomes have been found. These systems were named fin K, fin L, fin M, finN, consequently. They were characterized from the point of view of specificity of their action on F-factor and F-like conjugative function. Dependence of fin N-system expression on host-cell and on the order of plasmid entering into host-cell was shown.     

Replication of staphylococcal multiresistance plasmids

Based on structural and functional properties, three groups of large staphylococcal multiresistance plasmids have been recognized, viz., the pSK1 family, pSK41-like conjugative plasmids, and beta-lactamase-heavy-metal resistance plasmids. Here we describe an analysis of the replication functions of a representative of each of these plasmid groups. The replication initiation genes from the Staphylococcus aureus plasmids pSK1, pSK41, and pI9789::Tn552 were found to be related to each other and to the Staphylococcus xylosus plasmid pSX267 and are also related to rep genes of several plasmids from other gram-positive genera. Nucleotide sequence similarity between pSK1 and pI9789::Tn552 extended beyond their rep genes, encompassing upstream divergently transcribed genes, orf245 and orf256, respectively. Our analyses revealed that genes encoding proteins related to the deduced orf245 product are variously represented, in several types of organization, on plasmids possessing six seemingly evolutionarily distinct types of replication initiation genes and including both theta-mode and rolling-circle replicons. Construction of minireplicons and subsequent functional analysis demonstrated that orf245 is required for the segregational stability of the pSK1 replicon. In contrast, no gene equivalent to orf245 is evident on the conjugative plasmid pSK41, and a minireplicon encoding only the pSK41 rep gene was found to exhibit a segregational stability approaching that of the parent plasmid. Significantly, the results described establish that many of the large multiresistance plasmids that have been identified in clinical staphylococci, which were formerly presumed to be unrelated, actually utilize an evolutionarily related theta-mode replication system.     

Sequence analysis of a 1296-nucleotide plasmid from Xylella fastidiosa

A cryptic plasmid from Xylella fastidiosa strain ATCC 35868 was cloned, sequenced, and the sequence entered into GenBank (U71220). The plasmid is 1296 nucleotides in length with 55% GC content and three open reading frames. A plasmid with sequence homology was found in only one other strain of X. fastidiosa , ATCC 35878. Searches of the GenBank reveal nucleotide sequence homology with plasmid pNKH43 from Stenotrophomonas maltophilia , and amino acid sequence homology with phage Pf3 from Pseudomonas aeruginosa , plasmid pAP12875 from Acetobacter pasteurianus , and plasmid pVT736-1 from Actinobacillus actinomycetemcomitans .     

Complete nucleotide sequences of 84.5- and 3.2-kb plasmids in the multi-antibiotic resistant Salmonella enterica serovar Typhimurium U302 strain G8430

The multi-antibiotic resistant (MR) Salmonella enterica serovar Typhimurium phage type U302 strain G8430 exhibits the penta-resistant ACSSuT-phenotype (ampicillin, chloramphenicol, streptomycin, sulfonamides and tetracycline), and is also resistant to carbenicillin, erythromycin, kanamycin, and gentamicin. Two plasmids, 3.2- and 84.5-kb in size, carrying antibiotic resistance genes were isolated from this strain, and the nucleotide sequences were determined and analyzed. The 3.2-kb plasmid, pU302S, belongs to the ColE1 family and carries the aph(3')-I gene (Kan(R)). The 84.5-kb plasmid, pU302L, is an F-like plasmid and contains 14 complete IS elements and multiple resistance genes including aac3, aph(3')-I, sulII, tetA/R, strA/B, bla(TEM-1), mph, and the mer operon. Sequence analyses of pU302L revealed extensive homology to various plasmids or transposons, including F, R100, pHCM1, pO157, and pCTX-M3 plasmids and TnSF1 transposon, in regions involved in plasmid replication/maintenance functions and/or in antibiotic resistance gene clusters. Though similar to the conjugative plasmids F and R100 in the plasmid replication regions, pU302L does not contain oriT and the tra genes necessary for conjugal transfer. This mosaic pattern of sequence similarities suggests that pU302L acquired the resistance genes from a variety of enteric bacteria and underscores the importance of a further understanding of horizontal gene transfer among the enteric bacteria.     

A multi-resistance plasmid isolated from commensal Neisseria species is closely related to the enterobacterial plasmid RSF1010

pFM739, an R plasmid from Neisseria sicca that encodes penicillin, streptomycin and sulphonamide resistance, and the enterobacterial IncQ(P-4) plasmid RSF1010, which encodes streptomycin and sulphonamide resistance, were incompatible, and were mobilized by the same conjugative plasmids. Restriction mapping confirmed a high degree of similarity between both R plasmids; pFM739 carried DNA fragments corresponding to the known replication and resistance regions of RSF1010. pFM739 also carried an extra segment with the same restriction map as that described for the beta-lactamase-coding region of transposon Tn3. It is suggested that the R plasmids isolated from commensal Neisseria sp. could have resulted from transposition of a Tn3-like genetic element to an RSF1010-like plasmid, and that they contain deletion derivatives of transposon Tn3.     

Comparative analysis of the structure of incompatibility plasmids N, P and W

Evolutionary relationships of the IncN plasmid R15 and other broad host range plasmids (IncN plasmids N3 and R46, IncP plasmids RP4 and R906, IncW plasmids Sa and R388) were studied by Southern blot hybridization technique. The IncN plasmids were shown to harbour homologous determinants for replication and conjugation. No homology was found between the rep and tra genes in R15 and in the IncW and IncP plasmids, respectively. The second rep region of the N3 plasmid is distinctive from the corresponding determinants in the IncN plasmids. Homology was demonstrated for the plasmid genes that mediate restriction and modification in R15 and N3, mercury resistance in R15 and R906, sulfanilamide resistance in R15, N3, R46, Sa, R388, and R906, streptomycin resistance in R15, R46 and Sa. The latter genes are different from the R906 SmR gene. In addition to the three known mobile elements in the plasmid R15, the fourth one (IS46) that is a part of the transposon Tn2353 was identified in this study. Besides, the third copy of this insertion sequence was found in the N3 plasmid.     

The 79,370-bp conjugative plasmid pB4 consists of an IncP-1beta backbone loaded with a chromate resistance transposon,the strA-strB streptomycin resistance gene pair,the oxacillinase gene bla(NPS-1), and a tripartite antibiotic efflux system of the resistance-nodulation-division family

Plasmid pB4 is a conjugative antibiotic resistance plasmid, originally isolated from a microbial community growing in activated sludge, by means of an exogenous isolation method with Pseudomonas sp. B13 as recipient. We have determined the complete nucleotide sequence of pB4. The plasmid is 79,370 bp long and contains at least 81 complete coding regions. A suite of coding regions predicted to be involved in plasmid replication, plasmid maintenance, and conjugative transfer revealed significant similarity to the IncP-1beta backbone of R751. Four resistance gene regions comprising mobile genetic elements are inserted in the IncP-1beta backbone of pB4. The modular 'gene load' of pB4 includes (1) the novel transposon Tn 5719 containing genes characteristic of chromate resistance determinants, (2) the transposon Tn 5393c carrying the widespread streptomycin resistance gene pair strA-strB, (3) the beta-lactam antibiotic resistance gene bla(NPS-1) flanked by highly conserved sequences characteristic of integrons, and (4) a tripartite antibiotic resistance determinant comprising an efflux protein of the resistance-nodulation-division (RND) family, a periplasmic membrane fusion protein (MFP), and an outer membrane factor (OMF). The components of the RND-MFP-OMF efflux system showed the highest similarity to the products of the mexCD-oprJ determinant from the Pseudomonas aeruginosa chromosome. Functional analysis of the cloned resistance region from pB4 in Pseudomonas sp. B13 indicated that the RND-MFP-OMF efflux system conferred high-level resistance to erythromycin and roxithromycin resistance on the host strain. This is the first example of an RND-MFP-OMF-type antibiotic resistance determinant to be found in a plasmid genome. The global genetic organization of pB4 implies that its gene load might be disseminated between bacteria in different habitats by the combined action of the conjugation apparatus and the mobility of its component elements.     

Analysis of pSC138, the multidrug resistance plasmid of Salmonella enterica serotype Choleraesuis SC-B67

Salmonella enterica serotype Choleraesuis (S. Choleraesuis) usually causes systemic infections in man and needs antimicrobial treatment. Multidrug resistance (MDR) in S. Choleraesuis is thus a great concern in the treatment of systemic non-typhoid salmonellosis. A large plasmid, pSC138, was identified in 2002 from a S. Choleraesuis strain SC-B67 that was resistant to all antimicrobial agents commonly used to treat salmonellosis, including ciprofloxacin and ceftriaxone. Complete DNA sequence of the plasmid had been determined previously (Chiu et al., 2005). In the present study, the sequence of pSC138 was reannotated in detail and compared with several newly sequenced plasmids. Some transposable elements and drug resistance genes were further delineated. Plasmid pSC138 was 138,742 bp in length and consisted of 177 open reading frames (ORFs). While 134 of the ORFs displayed significant identity levels to other plasmid and prokaryotic sequences, the remaining 43 ORFs have not been previously reported. Mobile elements, including two integrons, seven insertion sequences and eight transposons, and a truncated prophage together encompass at least 66,781 bp (48.1%) of the plasmid genome. The sequence of pSC138 consists of three major regions: a large composite transposable region Tn6088 with a Tn21-like backbone inserted by a variety of integrons or transposable elements; a transfer/maintenance region that contains a conserved ISEcp1-mediated transposon-like element Tn6092, carrying an AmpC gene, bla(CMY-2), that confers the ceftriaxone resistance; and a Rep_3 type of replication region. Another seven bacteremic strains of S. Choleraesuis that expressed the same MDR phenotype were identified during 2003-2008. The same Rep_3 type replicase and the bla(CMY-2)-containing, ISEcp1-mediated transposon-like element were found in the MDR isolates, suggesting a successful preservation and dissemination of the MDR plasmid. Comparison of pSC138 with other recently published plasmids revealed a high identity level between partial sequences of pSC138 and plasmids of the same or different incompatibility groups. The large MDR region found in pSC138 may provide a niche for the future evolution of the plasmid by acquisition of relevant resistance genes through the panoply of mobile elements and illegitimate recombination events.     

Cloning of DNA fragments of the genetic transfer factor pAP39

Large HindIII digested fragments of the plasmid pAP39 have been cloned on the cosmid vector pHC79. The study of the structure of HindIII fragments of plasmid pAP39 in the recombinant plasmids has shown that these fragments are represented by f1 + f2 fragments from the plasmid pAP1055, by f1 + f6 fragments from the plasmid pAP1056, by f2 + f3 fragments from the plasmid pAP1057 and by two f3 fragment from the plasmid pAP1058. Physical maps of the recombinant plasmids have been constructed. The plasmid pAP39 is shown to contain two functionally active tra regions.     

Functional identification of conjugation and replication regions of the tetracycline resistance plasmid pCW3 from Clostridium perfringens

Clostridium perfringens causes fatal human infections, such as gas gangrene, as well as gastrointestinal diseases in both humans and animals. Detailed molecular analysis of the tetracycline resistance plasmid pCW3 from C. perfringens has shown that it represents the prototype of a unique family of conjugative antibiotic resistance and virulence plasmids. We have identified the pCW3 replication region by deletion and transposon mutagenesis and showed that the essential rep gene encoded a basic protein with no similarity to any known plasmid replication proteins. An 11-gene conjugation locus containing 5 genes that encoded putative proteins with similarity to proteins from the conjugative transposon Tn916 was identified, although the genes' genetic arrangements were different. Functional genetic studies demonstrated that two of the genes in this transfer clostridial plasmid (tcp) locus, tcpF and tcpH, were essential for the conjugative transfer of pCW3, and comparative analysis confirmed that the tcp locus was not confined to pCW3. The conjugation region was present on all known conjugative plasmids from C. perfringens, including an enterotoxin plasmid and other toxin plasmids. These results have significant implications for plasmid evolution, as they provide evidence that a nonreplicating Tn916-like element can evolve to become the conjugation locus of replicating plasmids that carry major virulence genes or antibiotic resistance determinants.