Enhanced fluorescence of tetrasulfonated zinc phthalocyanine by graphene quantum dots and its application in molecular sensing/imaging

When excited at 435 nm, tetra‐sulfonate zinc phthalocyanine (ZnPcS₄) emitted dual fluorescence at 495 and 702 nm. The abnormal fluorescence at 495 nm was experimentally studied and analyzed in detail for the first time. The abnormal fluorescence at 495 nm was deduced to originate from triplet–triplet (T–T) energy transfer of excited phthalocyanine (³*ZnPcS₄). Furthermore, graphene quantum dots (GQDs) enhanced the 495 nm fluorescence quantum yield (Q) of ZnPcS₄. The fluorescence properties of ZnPcS₄–GQDs conjugate were retained in a cellular environment. Based on the fluorescence of ZnPcS₄–GQDs conjugate, we designed and prepared an Apt29/thrombin/Apt15 sandwich thrombin sensor with high specificity and affinity. This cost‐saving, simple operational sensing strategy can be extended to use in sensing/imaging of other biomolecules.     

Solid‐phase synthesis of graphene quantum dots from the food additive citric acid under microwave irradiation and their use in live‐cell imaging

The work demonstrated that solid citric acid, one of the most common food additives, can be converted to graphene quantum dots (GQDs) under microwave heating. The as‐prepared GQDs were further characterized by various analytical techniques like transmission electron microscopy, atomic force microscopy, X‐ray diffraction, X–ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, fluorescence and UV‐visible spectroscopy. Cytotoxicity of the GQDs was evaluated using HeLa cells. The result showed that the GQDs almost did not exhibit cytotoxicity at concentrations as high as 1000 µg mL^–1. In addition, it was found that the GQDs showed good solubility, excellent photostability, and excitation‐dependent multicolor photoluminescence. Subsequently, the multicolor GQDs were successfully used as a fluorescence light‐up probe for live‐cell imaging. Copyright © 2015 John Wiley & Sons, Ltd.     

The effects of graphene quantum dots on the maturation of mouse oocytes and development of offspring

Recently, graphene nanomaterials have attracted tremendous attention and have been utilized in various fields because of their excellent mechanical, thermal, chemical, optical properties, and good biocompatibility, especially in biomedical aspects. However, there is a concern that the unique characteristics of nanomaterials may have undesirable effects. Therefore, in this study, we sought to systematically investigate the effects of graphene quantum dots (GQDs) on the maturation of mouse oocytes and development of the offspring via in vitro and in vivo studies. In vitro, we found that the first polar body extrusion rate in the high dosage exposure groups (1.0–1.5 mg/ml) ₂ decreased significantly and the failure of spindle migration and actin cap formation after GQDs exposure was observed. The underlying mechanisms might be associated with reactive oxygen species accumulation and DNA damage. Moreover, transmission electron microscope studies showed that GQDs may have been internalized into oocytes, tending to accumulate in the nucleus and severely affecting mitochondrial morphology, which included swollen and vacuolated mitochondria accompanied by cristae alteration with a lower amount of dense mitochondrial matrix. In vivo, when pregnant mice were exposed to GQDs at 8.5 days of gestation (GD, 8.5), we found that high dosage of GQD exposure (30 mg/kg) significantly affected mean fetal length; however, all the second generation of female mice grew up normal, attained sexual maturity, and gave birth to a healthy offspring after mating with a healthy male mouse. The results presented in this study are important for the future investigation of GQDs for the biomedical applications.     

Recent Advances on Graphene Quantum Dots as Multifunctional Nanoplatforms for Cancer Treatment

Graphene quantum dots (GQDs), the latest member of the graphene family, have attracted enormous interest in the last few years, due to their exceptional physical, chemical, electrical, optical, and biological properties. Their strong size-dependent photoluminescence and the presence of many reactive groups on the graphene surface allow their multimodal conjugation with therapeutic agents, targeting ligands, polymers, light responsive agents, fluorescent dyes, and functional nanoparticles, making them valuable agents for cancer diagnosis and treatment. In this review, the very recent advances covering the last 3 years on the applications of GQDs as drug delivery systems and theranostic tools for anticancer therapy are discussed, highlighting the relevant factors which regulate their biocompatibility. Among these factors, the size, kind, and degree of surface functionalization have shown to greatly affect their use in biological systems. Toxicity issues, which still represent an open challenge for the clinical development of GQDs based therapeutic agents, are also discussed at cellular and animal levels.     

Graphene quantum dots as additives in capillary electrophoresis for separation cinnamic acid and its derivatives

A facile capillary electrophoresis (CE) method for the separation of cinnamic acid and its derivatives (3,4-dimethoxycinnamic acid, 4-methoxycinnamic acid, isoferulic acid, sinapic acid, cinnamic acid, ferulic acid, and trans-4-hydroxycinnamic acid) using graphene quantum dots (GQDs) as additives with direct ultraviolet (UV) detection is reported. GQDs were synthesized by chemical oxidization and further purified by a macroporous resin column to remove salts (Na₂SO₄ and NaNO₃) and other impurities. Transmission electron microscopy (TEM) indicated that GQDs have a relatively uniform particle size (2.3 nm). Taking into account the structural features of GQDs, cinnamic acid and its derivatives were adopted as model compounds to investigate whether GQDs can be used to improve CE separations. The separation performance of GQDs used as additives in CE was studied through variations of pH, concentration of the background electrolyte (BGE), and contents of GQDs. The results indicated that excellent separation can be achieved in less than 18 min, which is mainly attributed to the interaction between the analytes and GQDs, especially isoferulic acid, sinapic acid, and cinnamic acid.     

Advanced Electrode Materials Comprising of Structure‐Engineered Quantum Dots for High‐Performance Asymmetric Micro‐Supercapacitors

Micro‐supercapacitors (MSCs) as a new class of energy storage devices have attracted great attention due to their unique merits. However, the narrow operating voltage, slow frequency response, and relatively low energy density of MSCs are still insufficient. Therefore, an effective strategy to improve their electrochemical performance by innovating upon the design from various aspects remains a huge challenge. Here, surface and structural engineering by downsizing to quantum dot scale, doping heteroatoms, creating more structural defects, and introducing rich functional groups to two dimensional (2D) materials is employed to tailor their physicochemical properties. The resulting nitrogen‐doped graphene quantum dots (N‐GQDs) and molybdenum disulfide quantum dots (MoS₂‐QDs) show outstanding electrochemical performance as negative and positive electrode materials, respectively. Importantly, the obtained N‐GQDs//MoS₂‐QDs asymmetric MSCs device exhibits a large operating voltage up to 1.5 V (far exceeding that of most reported MSCs), an ultrafast frequency response (with a short time constant of 0.087 ms), a high energy density of 0.55 mWh cm^?3, and long‐term cycling stability. This work not only provides a novel concept for the design of MSCs with enhanced performance but also may have broad application in other energy storage and conversion devices based on QDs materials.     

Facile hydrothermal synthesis of nitrogen rich blue fluorescent carbon dots for cell bio-imaging of Candida albicans

Nitrogen doped carbon dots (N-CDs) are well documented as an outstanding fluorogenic material for protein tags, live cell imaging and protein-receptor based fluorescence sensors owing to its good optical features with less cytotoxicity and better water solubility. In this regard, the present work describes the synthesis of nitrogen rich blue fluorescent carbon dots (NR-CDs) through hydrothermal treatment of citric acid monohydrate (CA) and 2-aminopyridine (2-AP). The optical properties of NR-CDs are further analyzed by common analytical methods viz., Fourier transform infrared (FT-IR), UV–visible (UV–vis) and Fluorescence spectroscopies. The surface chemical composition and morphology of NR-CDs are acquired by X-ray photo electron spectroscopy (XPS) and high resolution transmission electron microscopy (HR-TEM), respectively. The NR-CDs produce blue fluorescent at 421 nm at the excitation wavelength of 310 nm, the calculated quantum yield is about 18% with respect to standard quinine sulfate. The synthesized NR-CDs contains 15.03 wt % of N revealed by XPS results. Further, the NR-CDs are used as a fluorescence staining agent for cell imaging of Candida albicans (C. albicans) and the cytotoxicity are also measured. All the outcomes proposed that the NR-CDs act as good staining agent for C. albicans with less cytotoxicity.     

量子点的近场激发荧光特性研究

近场光学显微镜具有nm量级的空间分辨率,量子点(quantum dots,QDs)荧光探针具有激发谱宽、发射谱线窄、荧光强度高、抗光漂白和稳定性高等优点,两者结合用于生物大分子的成像探测和识别具有广泛的应用前景。用近场光学显微镜对链霉亲和素偶联的QDs进行近场荧光激发,并对其荧光发射特性和光稳定性进行研究,结果表明:近场光学显微镜nm量级的空间分辨率,可以同时观察到了QDs的单体、二聚体和三聚体;QDs的荧光发射强度高,近场荧光像对比度好,单量子点的荧光半高宽达到25nm;对一定入射波长的单色激发光,QDs的近场荧光强度随着激发功率密度的增加线性增加,并很快趋于稳定。与传统的荧光染料如异硫氰酸荧光素相比,QDs的稳定性非常好,在激发功率密度为300W/cm2的近场辐射下,量子点的荧光强度超过6h基本保持不变,其抗光漂白能力远远高于普通荧光染料。     

Quenching of graphene quantum dots fluorescence by alkaline phosphatase activity in the presence of hydroquinone diphosphate

In this work, a turn‐off photoluminescent sensing proof‐of‐concept based on blue luminescent graphene quantum dots (GQDs) as the fluorescent probe was developed. For that purpose, GQDs optical response was related with the catalytic enzymatic activity of alkaline phosphatase (ALP), in the presence of hydroquinone diphosphate (HQDP). The hydrolysis of HQDP by ALP generated hydroquinone (HQ). The oxidation of HQ, enzymatically produced, to p‐benzoquinone (BQ) resulted in the quenching of GQDs fluorescence (FL). Therefore, the developed luminescent sensing mechanism allowed the FL quenching with ALP activity to be related and thus quantified the concentration of ALP down to 0.5 nM of enzyme. This innovative design principle appears as a promising tool for the development of enzymatic sensors based on ALP labeling with fluorescent detection or even for direct ALP luminescent quantification in an easy, fast and sensitive manner.     

Electrochemical monitoring of malondialdehyde biomarker in biological samples via electropolymerized amino acid/chitosan nanocomposite

This study reports on the electropolymerization of a low toxic and biocompatible nanopolymer with entitle poly arginine‐graphene quantum dots‐chitosan (PARG‐GQDs‐CS) as a novel strategy for surface modification of glassy carbon surface and preparation of a new interface for measurement of malondialdehyde (MDA) in exhaled breath condensate. Electrochemical deposition, as a well‐controlled synthesis procedure, has been used for subsequently layer‐by‐layer preparation of GQDs‐CS nanostructures on a PARG prepolymerized on the surface of glassy carbon electrode using cyclic voltammetry techniques in the regime of ?1.5 to 2 V. The modified electrode appeared as an effective electroactivity for detection of MDA by using cyclic voltammetry, linear sweep voltammetry, and differential pulse voltammetry. The prepared modified electrode demonstrated a noticeably good activity for electrooxidation of MDA than PARG. Enhancement of peak currents is ascribed to the fast heterogeneous electron transfer kinetics that arise from the synergistic coupling between the excellent properties of PARG and semiconducting polymer, GQDs as high density of edge plane sites and subtle electronic characteristics and unique properties of CS such as excellent film‐forming ability, high permeability, good adhesion, nontoxicity, cheapness, and a susceptibility to chemical modification. The prepared sensor showed 1 oxidation processes for MDA at potentials about 1 V with a low limit of quantification 5.94 nM. Finally, application of new sensor for determination of MDA in exhaled breath condensate was suited. In general, the simultaneous attachment of GQDs and CS to structure of poly amino acids provides new opportunities within the personal healthcare.     

Microwave‐assisted aqueous synthesis of new quaternary‐alloyed CdSeTeS quantum dots; and their bioapplications in targeted imaging of cancer cells

In this study, we report for the first time a one‐pot approach for the synthesis of new CdSeTeS quaternary‐alloyed quantum dots (QDs) in aqueous phase by microwave irradiation. CdCl₂ was used as a Cd precursor during synthesis, NaHTe and NaHSe were used as Te and Se precursors and mercaptopropionic acid (MPA) was used as a stabilizer and source of sulfur. A series of quaternary‐alloyed QDs of different sizes were prepared. CdSeTeS QDs exhibited a wide emission range from 549 to 709 nm and high quantum yield (QY) up to 57.7 %. Most importantly, the quaternary‐alloyed QDs possessed significantly long fluorescence lifetimes > 100 ns as well as excellent photostability. Results of high‐resolution transmission electron microscopy (HRTEM), energy dispersive X‐ray spectroscopy (EDX) and powder X‐ray diffraction (XRD) spectroscopy showed that the nanocrystals possessed a quaternary alloy structure with good crystallinity. Fluorescence correlation spectroscopy (FCS) showed that QDs possessed good water solubility and monodispersity in aqueous solution. Furthermore, CdSeTeS QDs were modified with alpha‐thio‐omega‐carboxy poly(ethylene glycol) (HS‐PEG‐COOH) and the modified QDs were linked to anti‐epidermal growth factor receptor (EGFR) antibodies. QDs with the EGFR antibodies as labeling probes were successfully applied to targeted imaging for EGFR on the surface of SiHa cervical cancer cells. We believe that CdSeTeS QDs can become useful probes for in vivo targeted imaging and clinical diagnosis. Copyright © 2012 John Wiley & Sons, Ltd.     

量子点在生物学中的研究进展

量子点作为一种新型的荧光标记物近年来已在生物学中获得广泛应用。本文总结了量子点的主要光学特性,其中包括荧光激发和发射光谱特性、量子产额、光漂白特性和荧光寿命等。重点综述了量子点在细胞标记、活体和组织成像、组合标记和光动力学治疗等生物学中的应用及其最新研究进展。同时讨论了量子点在应用中可能存在的细胞毒性等主要问题,最后对量子点在生物学中的应用前景作了展望。     

Ultrasensitive chemiluminescence assay for cimetidine detection based on the synergistic improving effect of Au nanoclusters and graphene quantum dots

A novel and sensitive chemiluminescence (CL) procedure based on the synergetic catalytic effects of gold nanoclusters (Au NCs) and graphene quantum dots (GQDs) was developed for the reliable measurement of cimetidine (CM). The initial experiments showed that the KMnO₄‐based oxidation of alkaline rhodamine B (RhoB) generated a very weak CL emission, which was intensively enhanced in the simultaneous presence of Au NCs and GQDs. CL intermediates can be adsorbed and gathered on the surface of Au NCs, becoming more stable. GQDs participate in the energy transferring processes and facilitate them. These improving effects were simultaneously obtained by adding both Au NCs and GQDs into the RhoB‐KMnO₄ reaction. Consequently, the increasing effect of the Au NCs/GQDs mixture was more than that of pure Au NCs or GQDs, and a new nano‐assisted powerful CL system was achieved. Furthermore, a marked quenching in the emission of the introduced CL system was observed in the presence of CM, so the system was examined to design a sensitive sensor for CM. After optimization of influencing parameters, the linear lessening in CL emission intensity of KMnO₄‐RhoB‐Au NCs/GQDs was verified for CM concentrations in the range 0.8–200 ng ml^?1. The limit of detection (3S_b/m) was 0.3 ng ml^?1. Despite being a simple CL method, good sensitivity was obtained for CM detection with reliable results for CM determination in human urine samples.     

Synthesis of highly fluorescent nitrogen and phosphorus doped carbon dots for the detection of Fe3+ ions in cancer cells

Highly fluorescent nitrogen and phosphorus‐doped carbon dots with a quantum yield 59% have been successfully synthesized from citric acid and di‐ammonium hydrogen phosphate by single step hydrothermal method. The synthesized carbon dots have high solubility as well as stability in aqueous medium. The as‐obtained carbon dots are well monodispersed with particle sizes 1.5–4 nm. Owing to a good tunable fluorescence property and biocompatibility, the carbon dots were applied for intercellular sensing of Fe³⁺ ions as well as cancer cell imaging. Copyright © 2015 John Wiley & Sons, Ltd.     

High photoluminescence quantum yield of TiO2 nanocrystals prepared using an alcohothermal method.

Highly dispersible TiO2 nanocrystals (approximately 6 nm) were prepared by an alcohothermal method. A strong and stable photoluminescence emission with a maximum at 450 nm was observed in the original TiO2 nanocrystals colloid. Compared with the emission from quinine sulphate in 0.05 mol/L sulphuric acid, the emission quantum yield of TiO2 nanocrystals was determined to be about 0.20, which was much higher than the values (0.002 and 0.001) reported in previous studies. The fluorescence micrograph of TiO2 nanocrystals encapsulated in lipsomes shows that TiO2 nanocrystals prepared in such a way have potential application as a fluorescence probe in biological imaging. Research on the luminescence mechanism indicates that the surface state and extent of crystallization of the TiO2 nanocrystals are crucial factors in the high photoluminescence quantum yield obtained in this study.     

Do the cations in clay and the polymer matrix affect quantum dot fluorescent properties?

This paper studied the effects of cations and polymer matrix on the fluorescent properties of quantum dots (QDs). The results indicated that temperature has a greater impact on fluorescence intensity than clay cations (mainly K⁺ and Na⁺). Combined fluorescence lifetime and steady‐state spectrometer tests showed that QD lifetimes all decreased when the cation concentration was increased, but the quantum yields were steady at various cation concentrations of 0, 0.05, 0.5 and 1 M. Poly(ethylene oxide) (PEO), poly(vinyl alcohol) (PVA) and diepoxy resin were used to study the effects of polymers on QD lifetime and quantum yield. The results showed that the lifetime for QDs 550 nm in PEO and PVA was 17.33 and 17.12 ns, respectively; for the epoxy resin, the lifetime was 0.74 ns, a sharp decrease from 24.47 ns. The quantum yield for QDs 550 nm changed from 34.22% to 7.45% and 7.81% in PEO and PVA, respectively; for the epoxy resin the quantum yield was 2.25%. QDs 580 nm and 620 nm showed the same results as QDs 550 nm. This study provides useful information on the design, synthesis and application of QDs–polymer luminescent materials. Copyright © 2015 John Wiley & Sons, Ltd.     

Aqueous synthesis of highly luminescent surface Mn2+‐doped CdTe quantum dots as a potential multimodal agent

Mn²⁺‐doped CdTe quantum dots (QDs) were synthesized directly via a facile surface doping strategy in aqueous solution. The best optical property emerged when the added amount of Mn²⁺ was 5% compared to Cd²⁺ in the CdTe nanoparticles and the reaction temperature was 60 °C. The fluorescence and magnetic properties of the QDs were studied. The as‐prepared Mn²⁺‐doped CdTe QDs have high quantum yield (48.13%) and a narrow distribution with an average diameter of 3.7 nm. The utility of biological imaging was also studied. Depending on the high quantum yield, cells in culture were illuminated and made more distinct from each other compared to results obtained with normal QDs. They also have a prominent longitudinal relaxivity value (r₁ = 4.2 mM^?1s^?1), which could indicate that the Mn²⁺‐doped CdTe QDs can be used as a potential multimodal agent for fluorescence and magnetic resonance imaging. Copyright © 2014 John Wiley & Sons, Ltd.     

Simultaneous Raman Microspectroscopy and Fluorescence Imaging of Bone Mineralization in Living Zebrafish Larvae

Confocal Raman microspectroscopy and fluorescence imaging are two well-established methods providing functional insight into the extracellular matrix and into living cells and tissues, respectively, down to single molecule detection. In living tissues, however, cells and extracellular matrix coexist and interact. To acquire information on this cell-matrix interaction, we developed a technique for colocalized, correlative multispectral tissue analysis by implementing high-sensitivity, wide-field fluorescence imaging on a confocal Raman microscope. As a proof of principle, we study early stages of bone formation in the zebrafish (Danio rerio) larvae because the zebrafish has emerged as a model organism to study vertebrate development. The newly formed bones were stained using a calcium fluorescent marker and the maturation process was imaged and chemically characterized in vivo. Results obtained from early stages of mineral deposition in the zebrafish fin bone unequivocally show the presence of hydrogen phosphate containing mineral phases in addition to the carbonated apatite mineral. The approach developed here opens significant opportunities in molecular imaging of metabolic activities, intracellular sensing, and trafficking as well as in vivo exploration of cell-tissue interfaces under (patho-)physiological conditions.     

The determination of nitrite by a graphene quantum dot fluorescence quenching method without sample pretreatment

A method for quantitative analysis of nitrite was achieved based on fluorescence quenching of graphene quantum dots. To obtain reliable results, the effects of pH, temperature and reaction time on this fluorescence quenching system were studied. Under optimized conditions, decrease in fluorescence intensity of graphene quantum dots (F₀/F) showed a good linear relationship with nitrite concentration between 0.007692–0.38406 mmol/L and 0.03623–0.13043 μmol/L; the limits of detection were 9.8 μmol/L and 5.4 nmol/L, respectively. Variable temperature experiments, UV absorption spectra and thermodynamic calculations were used to determine the quenching mechanism, and indicated that it was an exothermic, spontaneous dynamic quenching process. This method was used to analyse urine samples, and showed that it could be applied to analyse biological samples.     

Picosecond decay kinetics and quantum yield of fluorescence of the photoactive yellow protein from the halophilic purple phototrophic bacterium, Ectothiorhodospira halophila

The photoactive yellow protein (PYP) has been previously shown to be partially bleached and red shifted (in less than 10 ns) by a pulse of laser excitation at the wavelength maximum (445 nm), to further bleach (k = 7.5 × 10³ s^-1), and then to slowly recover in the dark (k = 2.6 s^-1) (Meyer, T. E., G. Tollin, J. H. Hazzard, and M. A. Cusanovich. 1989. Biophys. J. 56:559-564). The quantum yield for the formation of the fully bleached form was found to be 0.64. We have now shown that the yellow protein is weakly fluorescent with an emission maximum at 495 nm (which mirrors excitation at 445 nm) and a fluorescence quantum yield of 1.4 × 10^-3. Measurement of the picosecond kinetics of the fluorescence decay shows that ~90% of the emission occurs with a lifetime of 12 ps. This is in good agreement with the quantum yield determination, which suggests that a single quenching process (presumably the photochemical event) is primarily responsible for the excited state decay. The lifetime of the excited state of PYP is remarkably similar to that for the rise of the first photochemical intermediate of bacteriorhodopsin, and underscores the fundamental similarity in their photocycles despite a lack of structural relationship.