Subunit constituent of the porin trimers that form the permeability channels in the outer membrane of Salmonella typhimurium.

The polypeptide composition of the functional porin trimers that produced the permeability channels in the outer membrane of Salmonella typhimurium was examined on two-dimensional slab gels. The results suggested that the majority of porin trimers from strains producing mixed species of porin polypeptides consisted of homologous subunit polypeptides. The present results do not exclude the possibility that a small fraction of porin trimer is constructed from heterologous subunit polypeptides.     

Characterization of porins from the outer membrane of Salmonella typhimurium. 1. Chemical analysis.

The three species of channel-forming outer membrane proteins, porins, have been purified to homogeneity from mutant strains of Salmonella typhimurium which produce single species of porin. Purification was by stepwise solubilization with dodecylsulfate or guanidine thiocyanate, gel filtration, and preparative gel electrophoresis. Amino acid compositions and tryptic peptide maps of the three species of porins showed close resemblance, but at the same time clear differences among them. The number of amino acid residues in the porins purified from the strains SH5551, SH6377 and SH6017 were 361, 354 and 345, and their calculated molecular weights 39800, 39300 and 38000, respectively. Amino-terminal and carboxyl-terminal amino acids in all three species of porins appeared to be alanine and phenylalanine, respectively. Neither half-cystine nor hexosamine was found in these preparation of porins. The isoelectric points of porins from the strains SH5551, SH6377 and SH6017, determined by isoelectric focusing, showed slight differences from each other. These results, and the genetic experiments from another laboratory, suggest that the three species of porins in Salmonella typhimurium are distinct polypeptides, probably coded for by distinct structural genes, which might have been derived from the same ancestral gene.     

Transmembrane permeability channels in vesicles reconstituted from single species of porins from Salmonella typhimurium.

Aggregates of the "major" outer membrane proteins, "porins," of Salmonella typhimurium form diffusion channels in reconstituted vesicle membranes. The aggregate consists of three species of porins with apparent molecular weights of 34,000, 35,000, and 36,000 when active aggregates are subjected to sodium dodecyl sulfate-acrylamide gel electrophoresis after heating in the presence of sodium dodecyl sulfate (Nakae, J. Biol. Chem. 251:2176-2178, 1976). Single species of porins were isolated by solubilization of membranes and subsequent gel filtration in the presence of sodium dodecyl sulfate from the mutant strains of Salmonella typhimurium that produced only single species of porin. The single species of porins of either 34,000, 35,000, or 36,000 daltons formed diffusion channels when assayed for sucrose permeability in the vesicle membranes reconstituted from porins, phospholipids, and lipopolysaccharides. The exclusion limits of the pores made of single species of porins were not distinguishable from each other and from the exclusion limits of the pores made of the porin aggregates from the wild-type strain, when the permeability of vesicle membranes to radioactive di-, tri-, and tetrasaccharides and to various sizes of radioactive polyethylene glycol was determined. Porin-deficient mutants produced residual amounts of porin amounting to 1 to 5% that produced by the parent strain. This residual porin made diffusion channels when the isolated porins were incorporated into the vesicle membrane and assayed for permeability of saccharides.     

Protective immunities induced by porins from mutant strains of Salmonella typhimurium

The protective immunity against Salmonella typhimurium-infection in mice immunized with porins from mutant strains of S. typhimurium was studied. A high level of protection against S. typhimurium infection was achieved in mice immunized with native porins from S. typhimurium LT2 (wild-type strain) but not from S. typhimurium SH6017, SH6260, or SH5551 (mutant strains), which produce 34K, 35K, or 36K porin, respectively. Moreover, when mice were immunized with mixtures of 34K, 35K, and 36K porins (34K + 35K, 35K + 36K, 34K + 36K, or 34K + 35K + 36K porin) or LT2 porin heated at 100 C for 2 min in 2% SDS (heat-denatured LT2 porin), the degree of protective immunities in the mice was very much lower than that in the mice immunized with the native LT2 porin. However, antisera raised against these porins showed no significant differences of the antibody titer against LT2 porin or LT2 whole cells. On the other hand, mice immunized with the native LT2 porin--but not 34K, 35K, 36K, 34K + 35K + 36K, and the heat-denatured LT2 porins--exhibited significant levels of delayed-type hypersensitivity reaction and interleukin-2 production when they were elicited with whole cells of S. typhimurium LT2. These observations suggested that the high level of protection induced by the native LT2 porin immunization was dependent on the induction of cell-mediated immunity.     

Subunit structure of functional porin oligomers that form permeability channels in the other membrane of Escherichia coli.

Oligomers of a protein, porin, form permeability channels in the outer membrane of Escherichia coli B. A functional porin oligomer was identified and was purified to homogeneity by gel filtration in the presence of salts and sodium dodecyl sulfate. Molecular weights of purified porin oligomer and heat-dissociated monomer appeared to be 102,900 and 32,600, respectively, when determined by sedimentation equilibrium in the presence of sodium dodecyl sulfate. We concluded that the porin oligomer thus consists of three identical subunits. These data and results from other laboratories suggest porin trimers exist also in the outer membrane of intact cells, and participate in the formation of permeability channels. It was found that porin trimer bound less sodium dodecyl sulfate than the porin monomer.     

Structure and functional characterization of the periplasmic N-terminal polypeptide domain of the sugar-specific ion channel protein (ScrY porin)

The structure of the sucrose-specific porin (ScrY) from Salmonella typhimurium has been elucidated by X-ray crystallography to consist of 18 antiparallel beta-strands, associated as a trimer complex similar to ion-transport channels. However, the 71-amino-acid-residue N-terminal periplasmic domain was not determined from the crystal structure due to the absence of sufficient electron density. The N-terminal polypeptide contains a coiled-coil structural motif and has been assumed to play a role in the sugar binding of ScrY porin. In this study the proteolytic stability and a specific proteolytic truncation site at the N-terminal domain were identified by the complete primary structure characterization of ScrY porin, using MALDI mass spectrometry and post-source-decay fragmentation. The secondary structure and supramolecular association of the coiled-coil N-terminal domain were determined by chemical synthesis of the complete N-terminal polypeptide and several partial sequences and their spectroscopic, biophysical, and mass spectrometric characterization. Circular dichroism spectra revealed predominant alpha-helical conformation for the putative coiled-coil domain comprising residues 4-46. Specific association to both dimer and trimer complexes was identified by electrospray ionization mass spectra and was ascertained by dynamic light scattering and electrophoresis data. The role of the N-terminal domain in sugar binding was examined by comparative TR-NOE-NMR spectroscopy of the complete ScrY porin and a recombinant mutant, ScrY(delta1-62), lacking the N-terminal polypeptide. The TR-NOE-NMR data showed a strong influence of ScrY porin on the sugar-binding affinity and suggested a possible function of the periplasmic N terminus for supramolecular stabilization and low-affinity sugar binding.     

Determination of ion permeability through the channels made of porins from the outer membrane ofSalmonella typhimurium in lipid bilayer membranes

Summary The three types of porin (matrix-proteins) fromSalmonella typhimurium with molecular weights of 38,000, 39,000 and 40,000 were reconstituted with lipid bilayer membranes either as a trimer or as an oligomer (complex I). The specific conductance of the membranes increased several orders of magnitude after the addition of the porins into the aqueous phase bathing the membranes. A linear relationship between protein concentration in the aqueous phase and membrane conductance was found. In the case of lower protein concentrations (10^–12 m), the conductance increased in a stepwise fashion with a single conductance increment of 2.3 nS in 1m KCl. For a given salt the conductance increment was found to be largely independent of the particular porin (38 K, 39K or 40 K) and on the state of aggregation, although porin oligomers showed an up to 10 times smaller conductance increase in macroscopic conductance measurements. The conductance pathway has an ohmic current voltage characteristic and a poor selectivity for different alkali ions. Further information on the structure of the pores formed by the different porins fromSalmonella was obtained from the selectivity for various ions. From the permeability of the pore for large ions (Tris⁺, glucosamine⁺, Hepes^–_ a minimum pore diameter of 0.8 nm is estimated. This value is in agreement with the size of the pore as calculated from the conductance data for 1m KCl (1.4 nm for a pore length of 7.5 nm). The pore diameter may well account for the sugar permeability which has been found in reconstituted vesicles. The findings reported here are consistent with the assumption that the different porins form large aqueous channels in the lipid bilayer membranes and that the single condutance unit is a trimer. In addition, it is suggested that one trimer contains only one pore rather than a bundle of pores.     

Structural relatedness of enteric bacterial porins assessed with monoclonal antibodies to Salmonella typhimurium OmpD and OmpC.

The immunochemistry and structure of enteric bacterial porins are critical to the understanding of the immune response to bacterial infection. We raised 41 monoclonal antibodies (MAbs) to Salmonella typhimurium OmpD and OmpC porin trimers and monomers. Enzyme-linked immunosorbent assays, immunoprecipitations, and/or Western immunoblot techniques indicated that 39 MAbs (11 anti-trimer and 28 anti-monomer) in the panel are porin specific and one binds to the lipopolysaccharide; the specificity of the remaining MAb probably lies in the porin-lipopolysaccharide complex. Among the porin-specific MAbs, 10 bound cell-surface-exposed epitopes, one reacted with a periplasmic epitope, and the remaining 28 recognized determinants that are buried within the outer membrane bilayer. Many of the MAbs reacting with surface-exposed epitopes were highly specific, recognizing only the homologous porin trimers; this suggests that the cell-surface-exposed regions of porins tends to be quite different among S. typhimurium OmpF, OmpC, and OmpD porins. Immunological cross-reaction showed that S. typhimurium OmpD was very closely related to Escherichia coli NmpC and to the Lc porin of bacteriophage PA-2. Immunologically, E. coli OmpG and protein K also appear to belong to the family of closely related porins including E. coli OmpF, OmpC, PhoE, and NmpC and S. typhimurium OmpF, OmpC, and OmpD. It appears, however, that S. typhimurium "PhoE" is not closely related to this group. Finally, about one-third of the MAbs that presumably recognize buried epitopes reacted with porin domains that are widely conserved in 13 species of the family Enterobacteriaceae, but apparently not in the seven nonenterobacterial species tested. These data are evaluated in relation to host immune response to infection by gram-negative bacteria.     

Specificity of Salmonella porin as an eliciting antigen for cell-mediated immunity (CMI) reaction in murine salmonellosis

The specificities of Salmonella porin on elicitations of delayed-type hypersensitivity (DTH) reaction and interleukin-2 (IL-2) production in BALB/c mice immunized with Salmonella typhimurium were examined. Only porin from S. typhimurium was capable of eliciting significant levels of DTH and IL-2 production in S. typhimurium-immunized mice, whereas no significant DTH and IL-2 production were induced by porin from Salmonella enteritidis or Escherichia coli. Our observations suggested that Salmonella porin was a serovar-specific antigen for the elicitation of cell-mediated immunity (CMI) in salmonellosis.     

Characterization of Porins Isolated from the Outer Membrane of Serratia liquefaciens

A major outer membrane protein with an apparent molecular weight of 42 kDa was purified from Serratia liquefaciens grown on Brain Heart Infusion medium. The same protein was obtained when the cells were grown on a synthetic medium supplemented with 2% glucose. The amino acid composition of this protein revealed it to be hydrophilic. The pore-forming ability of the 42-kDa protein was determined by the liposome swelling assay. This assay demonstrated that the protein forms nonspecific channels with a diameter between 1.16 and 1.6 nm. An additional protein with a molecular weight of 47 kDa was obtained on synthetic medium supplemented with maltose. This protein exhibited specific pore-forming ability to maltose and maltodextrins, but was also permeable to other compounds, according to their size. When bacteria were grown on Nutrient Broth medium, two outer membrane proteins with molecular weights of 41 kDa and 42 kDa were produced by the bacteria. All three types of proteins represent monomers of respective oligomers. The monomers did not exhibit pore-forming ability when incorporated into liposomes. We, therefore, propose that the oligomer is the functional unit of a porin capable of forming permeability channels in the outer membrane of Serratia liquefaciens. These results indicate that S. liquefaciens contains several porins exhibiting specific osmoregulation or that are induced by a specific nutrient, where the 42-kDa outer membrane protein of this bacterium is certainly a major porin. Received: 6 July 1998 / Accepted: 19 August 1998     

Effect on solute size on diffusion rates through the transmembrane pores of the outer membrane of Escherichia coli

Nutrients usually cross the outer membrane of Escherichia coli by diffusion through water-filled channels surrounded by a specific class of protein, porins. In this study, the rates of diffusion of hydrophilic nonelectrolytes, mostly sugars and sugar alcohols, through the porin channels were determined in two systems, (a) vesicles reconstituted from phospholipids and purified porin and (b) intact cells of mutant strains that produce many fewer porin molecules than wild-type strains. The diffusion rates were strongly affected by the size of the solute, even when the size was well within the "exclusion limit" of the channel. In both systems, hexoses and hexose disaccharides diffused through the channel at rates 50-80% and 2-4%, respectively, of that of a pentose, arabinose. Application of the Renkin equation to these data led to the estimate that the pore radius is approximately 0.6 nm, if the pore is assumed to be a hollow cylinder. The results of the study also show that the permeability of the outer membrane of the wild-type E. coli cell to glucose and lactose can be explained by the presence of porin channels, that a significant fraction of these channels must be functional or "open" under our conditions of growth, and that even 10(5) channels per cell could become limiting when E. coli tries to grow at a maximal rate on low concentrations of slowly penetrating solutes, such as disaccharides.     

Effect of lipopolysaccharide structure on reactivity of antiporin monoclonal antibodies with the bacterial cell surface.

We studied the reactivity of 66 anti-Escherichia coli B/r porin monoclonal antibodies (MAbs) with several E. coli and Salmonella typhimurium strains. Western immunoblots showed complete immunological cross-reactivity between E. coli B/r and K-12; among 34 MAbs which recognized porin in immunoblots of denatured outer membranes of E. coli B/r, all reacted with OmpF in denatured outer membranes of E. coli K-12. Extensive reactivity, although less than that for strain B/r (31 of 34 MAbs), occurred for porin from a wild-type isolate, E. coli O8:K27. Only one of the MAbs reacted with porin in denatured outer membranes of S. typhimurium. Even with immunochemical amplification of the Western immunoblot technique, only six MAbs recognized S. typhimurium porin (OmpD), demonstrating that there is significant immunological divergence between the porins of these species. Antibody binding to the bacterial surface, which was analyzed by cytofluorimetry, was strongly influenced by lipopolysaccharide (LPS) structure. An intact O antigen, as in E. coli O8:K27, blocked adsorption of all 20 MAbs in the test panel. rfa+ E. coli K-12, without an O antigen but with an intact LPS core, bound seven MAbs. When assayed against a series of rfa E. coli K-12 mutants, the number of MAbs that recognized porin surface epitopes increased sequentially as the LPS core became shorter. A total of 17 MAbs bound porin in a deep rough rfaD strain. Similar results were obtained with S. typhimurium. None of the anti-E. coli B/r porin MAbs adsorbed to a smooth strain, but three antibodies recognized porin on deep rough (rfaF, rfaE) mutants. These data define six distinct porin surface epitopes that are shielded by LPS from reaction with antibodies.     

Determinants of OmpF porin antigenicity and structure.

Sixty-six murine hybridomas raised to Escherichia coli B/r porin were used to identify and differentiate the epitopes of this outer membrane protein. Anti-porin monoclonal antibodies (mAb) were raised against outer membrane fragments, purified native trimeric porin (trimer), and purified sodium dodecyl sulfate-denatured monomeric porin (monomer). Immunochemical and flow cytometric methods identified five distinct cell surface-exposed determinants on OmpF. The peptide composition of porin epitopes was determined by analysis of mAb reactivity with cyanogen bromide-generated peptide fragments. Four of 43 anti-monomer mAb reacted with surface exposed sites on OmpF, defining epitopes that consist of residues within CNBr peptides d2, d3, and B. The anti-porin mAb panel was also used to evaluate changes in porin antigenic structure in strains with short ompF deletions. Flow cytometric experiments indicated that despite changes in porin permeability, little if any alteration of surface epitopes occurred in these strains. Western immunoblot analysis of the mutant porins showed loss of reactivity with numerous mAb, which was caused by changes in three spatially distinct epitopes at residues 108-111, 118-123, and 124-129. Our findings indicate that in these ompF mutants the residues responsible for altering porin permeability are not exposed on the cell surface, but are buried within the tertiary structure of the protein. One of these regions, which is apparently involved in the determination of channel permeability characteristics, is conserved among 15 of 16 different porin molecules which were screened with the anti-OmpF mAb panel.     

Structure and function of an OmpC deletion mutant porin from Escherichia coli K-12.

Escherichia coli K-12 strain RAM122 contains a mutation in the ompC gene that results in an eight amino acid deletion, delta 103-110, in the porin protein. Since this strain is capable of growing on maltodextrins in the absence of a functional lamB gene, the mutant protein is thought to have a larger channel size. The stability and structure/function properties of the mutant OmpC porin were investigated and compared to wild-type porin. Isolated unheated RAM122 porin was characterized as a trimer on sodium dodecyl sulfate-polyacrylamide gels. The RAM122 trimer was less stable to temperature when compared to the wild-type porin. In addition, the overall enthalpy for thermal denaturation was lower for the mutant than the wild-type porin as determined by using differential scanning microcalorimetry. Both the proteins' secondary structures, monitored by circular dichroism, were high in beta-sheet content, but the spectra were slightly different in their crossover points as well as their minima. When the proteins were reconstituted and channel activity was assayed by using a liposome swelling technique, the size-exclusion limit of the mutant porin was twice that of the wild-type porin. Conductance measurements across bilayer lipid membranes showed that the mutant porin was voltage gated at much lower membrane potentials, 50 and 75 mV, than the wild-type sample. The closing events of the mutant porin were predominantly of monomer size. The channels detected by using the mutant protein were larger in size than those measured for the wild-type porin monomer. These data suggest that the OmpC mutant porin has a channel size capable of allowing maltodextrins to enter and that this channel is highly voltage regulated.     

Detection of porin antigen in serum for early diagnosis of mouse infections with Salmonella typhimurium

Abstract The monoclonal antibodies to porin, an outer membrane protein isolated from Salmonella typhimurium and sandwich enzyme linked immunosorbent assay (ELISA) has made possible the detection of porin from sera of S. typhimurium -infected mice. The specificity of the monoclonal antibodies was ascertained based on their cross-reactivity with porins isolated from S. typhi, Shigella flexneri and Escherichia coli and lipopolysaccharide (LPS) of S. typhimurium and E. coli . Serum samples were found to be positive for porin as early as 3 days after intravenous and 5 days after oral infection. In addition, a positive correlation was observed between the bacterial load and the concentration of porin detected in the sera. On the other hand, analysis of sera for anti-porin antibody showed diametrically opposite time kinetics with antigenaemia. These results indicate that porin accumulates in the serum of infected mice much earlier than the appearance of antibodies to porin. Thus detection of porin holds promise for early diagnosis of typhoid.     

Targeting of porin to the outer membrane of Escherichia coli. Rate of trimer assembly and identification of a dimer intermediate

Porin, a transmembrane protein in the outer membrane of Escherichia coli, exists in a trimeric structure which is not dissociated during sodium dodecyl sulfate-polyacrylamide gel electrophoresis at 25 degrees C. This unusual stability was utilized in the study of the conformational changes which accompany the targeting of porin to the outer membrane. A delay of 16-44 s between completion of synthesis of a monomer and its assembly into a trimer was found from the ratio of monomers to trimers found in exponentially growing cells. Pulse-chase experiments showed that rapid processing of precursor OmpF molecules was followed by assembly into sodium dodecyl sulfate-resistant oligomers with a half-time of 20 s at 30 degrees C. An intermediate in assembly was isolated by immunoprecipitation and sodium dodecyl sulfate-polyacrylamide gel electrophoresis below 10 degrees C and was identified as a metastable dimer.     

Characterization of monoclonal antibodies to the outer membrane protein (OmpD) of Salmonella typhimurium.

A panel of monoclonal antibodies, seven against the trimeric and seven against the monomeric forms to outer membrane protein D (OmpD) of Salmonella typhimurium were produced. The specificities of these monoclonal antibodies for the porin proteins of S. typhimurium and their cross-reactions with Salmonella porins OmpC and OmpF were determined by Western immunoblotting and enzyme-linked immunosorbent assay. We observed that OmpD shared more epitopes and had greater structural similarity with OmpC than with OmpF.     

Asymmetric pore occupancy in crystal structure of OmpF porin from Salmonella typhi

OmpF is a major general diffusion porin of Salmonella typhi, a Gram-negative bacterium, which is an obligatory human pathogen causing typhoid. The structure of S. typhi Ty21a OmpF (PDB Id: 3NSG) determined at 2.8 ? resolution by X-ray crystallography shows a 16-stranded β-barrel with three β-barrel monomers associated to form a trimer. The packing observed in S. typhi Ty21a rfOmpF crystals has not been observed earlier in other porin structures. The variations seen in the loop regions provide a starting point for using the S. typhi OmpF for structure-based multi-valent vaccine design. Along one side of the S. typhi Ty21a OmpF pore there exists a staircase arrangement of basic residues (20R, 60R, 62K, 65R, 77R, 130R and 16K), which also contribute, to the electrostatic potential in the pore. This structure suggests the presence of asymmetric electrostatics in the porin oligomer. Moreover, antibiotic translocation, permeability and reduced uptake in the case of mutants can be understood based on the structure paving the way for designing new antibiotics.     

Salmonella typhimurium contains an anion-selective outer membrane porin induced by phosphate starvation.

A mutant of Salmonella typhimurium was selected that is constitutive for the pho regulon. It exhibited constitutive glycerol-3-phosphate transport activity and synthesized a new outer membrane porin. Upon measurement of porin activity in black lipid films, it exhibited anion selectivity. It therefore appears analogous to the Escherichia coli PhoE porin.     

The dispersion of gram-negative lipopolysaccharide by deoxycholate. Subunit molecular weight

The lipopolysaccharide (LPS) was isolated from three strains of Salmonella typhimurium, a "smooth" strain, STM 7, the Ra mutant, TV 119, and the Re mutant, SL 1102. The effect of depletion of divalent cations on structure and the effect of deoxycholate on hydrodynamic behavior were studied. The results confirmed previous work by others that divalent cations and hydrophobic forces are important factors influencing LPS size and morphology. The binding of deoxycholate to LPS was measured. When the weight average molecular weights of the deoxycholate-dissociated LPS were determined by sedimentation equilibrium and corrected for bound deoxycholate, the values 5,555, 10,607, and 15,592, respectively, for Re, Ra, and "smooth" LPS were in good agreement with calculated formula weights. Although others have suggested that the basic LPS subunit is a trimer, our results suggest that it exists in the dimeric form.